gecko-dev/layout/base/nsCaret.cpp

1169 lines
38 KiB
C++

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim: set ts=2 sw=2 et tw=78: */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Pierre Phaneuf <pp@ludusdesign.com>
* Mats Palmgren <mats.palmgren@bredband.net>
*
* Alternatively, the contents of this file may be used under the terms of
* either of the GNU General Public License Version 2 or later (the "GPL"),
* or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/* the caret is the text cursor used, e.g., when editing */
#include "nsCOMPtr.h"
#include "nsITimer.h"
#include "nsIComponentManager.h"
#include "nsIServiceManager.h"
#include "nsFrameSelection.h"
#include "nsIFrame.h"
#include "nsIDOMNode.h"
#include "nsIDOMRange.h"
#include "nsIFontMetrics.h"
#include "nsISelection.h"
#include "nsISelectionPrivate.h"
#include "nsIDOMCharacterData.h"
#include "nsIContent.h"
#include "nsIPresShell.h"
#include "nsIRenderingContext.h"
#include "nsIDeviceContext.h"
#include "nsIView.h"
#include "nsIScrollableView.h"
#include "nsIViewManager.h"
#include "nsPresContext.h"
#include "nsILookAndFeel.h"
#include "nsBlockFrame.h"
#include "nsISelectionController.h"
#include "nsDisplayList.h"
#include "nsCaret.h"
// The bidi indicator hangs off the caret to one side, to show which
// direction the typing is in. It needs to be at least 2x2 to avoid looking like
// an insignificant dot
static const PRUint32 kMinBidiIndicatorPixels = 2;
#ifdef IBMBIDI
#include "nsLayoutAtoms.h"
#include "nsIBidiKeyboard.h"
#include "nsContentUtils.h"
#endif //IBMBIDI
//-----------------------------------------------------------------------------
nsCaret::nsCaret()
: mPresShell(nsnull)
, mBlinkRate(500)
, mVisible(PR_FALSE)
, mDrawn(PR_FALSE)
, mReadOnly(PR_FALSE)
, mShowDuringSelection(PR_FALSE)
, mLastContentOffset(0)
, mLastHint(nsFrameSelection::HINTLEFT)
#ifdef IBMBIDI
, mLastBidiLevel(0)
, mKeyboardRTL(PR_FALSE)
#endif
{
}
//-----------------------------------------------------------------------------
nsCaret::~nsCaret()
{
KillTimer();
}
//-----------------------------------------------------------------------------
NS_IMETHODIMP nsCaret::Init(nsIPresShell *inPresShell)
{
NS_ENSURE_ARG(inPresShell);
mPresShell = do_GetWeakReference(inPresShell); // the presshell owns us, so no addref
NS_ASSERTION(mPresShell, "Hey, pres shell should support weak refs");
// get nsILookAndFeel from the pres context, which has one cached.
nsILookAndFeel *lookAndFeel = nsnull;
nsPresContext *presContext = inPresShell->GetPresContext();
PRInt32 caretPixelsWidth = 1;
if (presContext && (lookAndFeel = presContext->LookAndFeel())) {
PRInt32 tempInt;
if (NS_SUCCEEDED(lookAndFeel->GetMetric(nsILookAndFeel::eMetric_CaretWidth, tempInt)))
caretPixelsWidth = (nscoord)tempInt;
if (NS_SUCCEEDED(lookAndFeel->GetMetric(nsILookAndFeel::eMetric_CaretBlinkTime, tempInt)))
mBlinkRate = (PRUint32)tempInt;
if (NS_SUCCEEDED(lookAndFeel->GetMetric(nsILookAndFeel::eMetric_ShowCaretDuringSelection, tempInt)))
mShowDuringSelection = tempInt ? PR_TRUE : PR_FALSE;
}
float tDevUnitsToTwips;
tDevUnitsToTwips = presContext->DeviceContext()->DevUnitsToTwips();
mCaretTwipsWidth = (nscoord)(tDevUnitsToTwips * (float)caretPixelsWidth);
mBidiIndicatorTwipsSize = (nscoord)(tDevUnitsToTwips * (float)kMinBidiIndicatorPixels);
if (mBidiIndicatorTwipsSize < mCaretTwipsWidth) {
mBidiIndicatorTwipsSize = mCaretTwipsWidth;
}
// get the selection from the pres shell, and set ourselves up as a selection
// listener
nsCOMPtr<nsISelectionController> selCon = do_QueryReferent(mPresShell);
if (!selCon)
return NS_ERROR_FAILURE;
nsCOMPtr<nsISelection> domSelection;
nsresult rv = selCon->GetSelection(nsISelectionController::SELECTION_NORMAL,
getter_AddRefs(domSelection));
if (NS_FAILED(rv))
return rv;
if (!domSelection)
return NS_ERROR_FAILURE;
nsCOMPtr<nsISelectionPrivate> privateSelection = do_QueryInterface(domSelection);
if (privateSelection)
privateSelection->AddSelectionListener(this);
mDomSelectionWeak = do_GetWeakReference(domSelection);
// set up the blink timer
if (mVisible)
{
rv = StartBlinking();
if (NS_FAILED(rv))
return rv;
}
return NS_OK;
}
//-----------------------------------------------------------------------------
NS_IMETHODIMP nsCaret::Terminate()
{
// this doesn't erase the caret if it's drawn. Should it? We might not have
// a good drawing environment during teardown.
KillTimer();
mBlinkTimer = nsnull;
// unregiser ourselves as a selection listener
nsCOMPtr<nsISelection> domSelection = do_QueryReferent(mDomSelectionWeak);
nsCOMPtr<nsISelectionPrivate> privateSelection(do_QueryInterface(domSelection));
if (privateSelection)
privateSelection->RemoveSelectionListener(this);
mDomSelectionWeak = nsnull;
mPresShell = nsnull;
mLastContent = nsnull;
return NS_OK;
}
//-----------------------------------------------------------------------------
NS_IMPL_ISUPPORTS2(nsCaret, nsICaret, nsISelectionListener)
//-----------------------------------------------------------------------------
NS_IMETHODIMP nsCaret::GetCaretDOMSelection(nsISelection **aDOMSel)
{
nsCOMPtr<nsISelection> sel(do_QueryReferent(mDomSelectionWeak));
NS_IF_ADDREF(*aDOMSel = sel);
return NS_OK;
}
//-----------------------------------------------------------------------------
NS_IMETHODIMP nsCaret::SetCaretDOMSelection(nsISelection *aDOMSel)
{
NS_ENSURE_ARG_POINTER(aDOMSel);
mDomSelectionWeak = do_GetWeakReference(aDOMSel); // weak reference to pres shell
if (mVisible)
{
// Stop the caret from blinking in its previous location.
StopBlinking();
// Start the caret blinking in the new location.
StartBlinking();
}
return NS_OK;
}
//-----------------------------------------------------------------------------
NS_IMETHODIMP nsCaret::SetCaretVisible(PRBool inMakeVisible)
{
mVisible = inMakeVisible;
nsresult err = NS_OK;
if (mVisible)
err = StartBlinking();
else
err = StopBlinking();
return err;
}
//-----------------------------------------------------------------------------
NS_IMETHODIMP nsCaret::GetCaretVisible(PRBool *outMakeVisible)
{
NS_ENSURE_ARG_POINTER(outMakeVisible);
*outMakeVisible = mVisible;
return NS_OK;
}
//-----------------------------------------------------------------------------
NS_IMETHODIMP nsCaret::SetCaretReadOnly(PRBool inMakeReadonly)
{
mReadOnly = inMakeReadonly;
return NS_OK;
}
//-----------------------------------------------------------------------------
NS_IMETHODIMP nsCaret::GetCaretCoordinates(EViewCoordinates aRelativeToType,
nsISelection *aDOMSel,
nsRect *outCoordinates,
PRBool *outIsCollapsed,
nsIView **outView)
{
if (!mPresShell)
return NS_ERROR_NOT_INITIALIZED;
if (!outCoordinates || !outIsCollapsed)
return NS_ERROR_NULL_POINTER;
nsCOMPtr<nsISelection> domSelection = aDOMSel;
if (outView)
*outView = nsnull;
// fill in defaults for failure
outCoordinates->x = -1;
outCoordinates->y = -1;
outCoordinates->width = -1;
outCoordinates->height = -1;
*outIsCollapsed = PR_FALSE;
nsresult err = domSelection->GetIsCollapsed(outIsCollapsed);
if (NS_FAILED(err))
return err;
nsCOMPtr<nsIDOMNode> focusNode;
err = domSelection->GetFocusNode(getter_AddRefs(focusNode));
if (NS_FAILED(err))
return err;
if (!focusNode)
return NS_ERROR_FAILURE;
PRInt32 focusOffset;
err = domSelection->GetFocusOffset(&focusOffset);
if (NS_FAILED(err))
return err;
nsCOMPtr<nsIContent> contentNode = do_QueryInterface(focusNode);
if (!contentNode)
return NS_ERROR_FAILURE;
// find the frame that contains the content node that has focus
nsIFrame* theFrame = nsnull;
PRInt32 theFrameOffset = 0;
nsFrameSelection* frameSelection = GetFrameSelection();
if (!frameSelection)
return NS_ERROR_FAILURE;
PRUint8 bidiLevel = frameSelection->GetCaretBidiLevel();
err = GetCaretFrameForNodeOffset(contentNode, focusOffset,
frameSelection->GetHint(), bidiLevel,
&theFrame, &theFrameOffset);
if (NS_FAILED(err) || !theFrame)
return err;
nsPoint viewOffset(0, 0);
nsIView *drawingView; // views are not refcounted
GetViewForRendering(theFrame, aRelativeToType, viewOffset, &drawingView, outView);
if (!drawingView)
return NS_ERROR_UNEXPECTED;
// ramp up to make a rendering context for measuring text.
// First, we get the pres context ...
nsCOMPtr<nsIPresShell> presShell = do_QueryReferent(mPresShell);
if (!presShell)
return NS_ERROR_FAILURE;
nsPresContext *presContext = presShell->GetPresContext();
// ... then tell it to make a rendering context
nsCOMPtr<nsIRenderingContext> rendContext;
err = presContext->DeviceContext()->
CreateRenderingContext(drawingView, *getter_AddRefs(rendContext));
if (NS_FAILED(err))
return err;
if (!rendContext)
return NS_ERROR_UNEXPECTED;
// now we can measure the offset into the frame.
nsPoint framePos(0, 0);
err = theFrame->GetPointFromOffset(presContext, rendContext, theFrameOffset,
&framePos);
if (NS_FAILED(err))
return err;
// we don't need drawingView anymore so reuse that; reset viewOffset values for our purposes
if (aRelativeToType == eClosestViewCoordinates)
{
theFrame->GetOffsetFromView(viewOffset, &drawingView);
if (outView)
*outView = drawingView;
}
// now add the frame offset to the view offset, and we're done
viewOffset += framePos;
outCoordinates->x = viewOffset.x;
outCoordinates->y = viewOffset.y;
outCoordinates->height = theFrame->GetSize().height;
outCoordinates->width = mCaretTwipsWidth;
return NS_OK;
}
void nsCaret::DrawCaretAfterBriefDelay()
{
// Make sure readonly caret gets drawn again if it needs to be
if (!mBlinkTimer) {
nsresult err;
mBlinkTimer = do_CreateInstance("@mozilla.org/timer;1", &err);
if (NS_FAILED(err))
return;
}
mBlinkTimer->InitWithFuncCallback(CaretBlinkCallback, this, 0,
nsITimer::TYPE_ONE_SHOT);
}
NS_IMETHODIMP nsCaret::EraseCaret()
{
if (mDrawn) {
DrawCaret(PR_TRUE);
if (mReadOnly) {
// If readonly we don't have a blink timer set, so caret won't
// be redrawn automatically. We need to force the caret to get
// redrawn right after the paint
DrawCaretAfterBriefDelay();
}
}
return NS_OK;
}
NS_IMETHODIMP nsCaret::SetVisibilityDuringSelection(PRBool aVisibility)
{
mShowDuringSelection = aVisibility;
return NS_OK;
}
NS_IMETHODIMP nsCaret::DrawAtPosition(nsIDOMNode* aNode, PRInt32 aOffset)
{
NS_ENSURE_ARG(aNode);
PRUint8 bidiLevel;
nsFrameSelection* frameSelection = GetFrameSelection();
if (!frameSelection)
return NS_ERROR_FAILURE;
bidiLevel = frameSelection->GetCaretBidiLevel();
// XXX we need to do more work here to get the correct hint.
nsresult rv = DrawAtPositionWithHint(aNode, aOffset,
nsFrameSelection::HINTLEFT,
bidiLevel, PR_TRUE)
? NS_OK : NS_ERROR_FAILURE;
ToggleDrawnStatus();
return rv;
}
nsIFrame * nsCaret::GetCaretFrame()
{
// Return null if we're not drawn to prevent anybody from trying to draw us.
if (!mDrawn)
return nsnull;
// Recompute the frame that we're supposed to draw in to guarantee that
// we're not going to try to draw into a stale (dead) frame.
PRInt32 unused;
nsIFrame *frame = nsnull;
nsresult rv = GetCaretFrameForNodeOffset(mLastContent, mLastContentOffset,
mLastHint, mLastBidiLevel, &frame,
&unused);
if (NS_FAILED(rv))
return nsnull;
return frame;
}
void nsCaret::InvalidateOutsideCaret()
{
nsIFrame *frame = GetCaretFrame();
// Only invalidate if we are not fully contained by our frame's rect.
if (frame && !frame->GetOverflowRect().Contains(GetCaretRect()))
InvalidateRects(mCaretRect, GetHookRect(), frame);
}
void nsCaret::UpdateCaretPosition()
{
// We'll recalculate anyway if we're not drawn right now.
if (!mDrawn)
return;
// A trick! Make the DrawCaret code recalculate the caret's current
// position.
mDrawn = PR_FALSE;
DrawCaret(PR_FALSE);
}
void nsCaret::PaintCaret(nsDisplayListBuilder *aBuilder,
nsIRenderingContext *aCtx,
const nsPoint &aOffset,
nscolor aColor)
{
NS_ASSERTION(mDrawn, "The caret shouldn't be drawing");
aCtx->SetColor(aColor);
aCtx->FillRect(mCaretRect + aOffset);
if (!GetHookRect().IsEmpty())
aCtx->FillRect(GetHookRect() + aOffset);
}
#ifdef XP_MAC
#pragma mark -
#endif
//-----------------------------------------------------------------------------
NS_IMETHODIMP nsCaret::NotifySelectionChanged(nsIDOMDocument *, nsISelection *aDomSel, PRInt16 aReason)
{
if (aReason & nsISelectionListener::MOUSEUP_REASON)//this wont do
return NS_OK;
nsCOMPtr<nsISelection> domSel(do_QueryReferent(mDomSelectionWeak));
// The same caret is shared amongst the document and any text widgets it
// may contain. This means that the caret could get notifications from
// multiple selections.
//
// If this notification is for a selection that is not the one the
// the caret is currently interested in (mDomSelectionWeak), then there
// is nothing to do!
if (domSel != aDomSel)
return NS_OK;
if (mVisible)
{
// Stop the caret from blinking in its previous location.
StopBlinking();
// Start the caret blinking in the new location.
StartBlinking();
}
return NS_OK;
}
#ifdef XP_MAC
#pragma mark -
#endif
//-----------------------------------------------------------------------------
void nsCaret::KillTimer()
{
if (mBlinkTimer)
{
mBlinkTimer->Cancel();
}
}
//-----------------------------------------------------------------------------
nsresult nsCaret::PrimeTimer()
{
// set up the blink timer
if (!mReadOnly && mBlinkRate > 0)
{
if (!mBlinkTimer) {
nsresult err;
mBlinkTimer = do_CreateInstance("@mozilla.org/timer;1", &err);
if (NS_FAILED(err))
return err;
}
mBlinkTimer->InitWithFuncCallback(CaretBlinkCallback, this, mBlinkRate,
nsITimer::TYPE_REPEATING_SLACK);
}
return NS_OK;
}
//-----------------------------------------------------------------------------
nsresult nsCaret::StartBlinking()
{
if (mReadOnly) {
// Make sure the one draw command we use for a readonly caret isn't
// done until the selection is set
DrawCaretAfterBriefDelay();
return NS_OK;
}
PrimeTimer();
// If we are currently drawn, then the second call to DrawCaret below will
// actually erase the caret. That would cause the caret to spend an "off"
// cycle before it appears, which is not really what we want. This first
// call to DrawCaret makes sure that the first cycle after a call to
// StartBlinking is an "on" cycle.
if (mDrawn)
DrawCaret(PR_TRUE);
DrawCaret(PR_TRUE); // draw it right away
return NS_OK;
}
//-----------------------------------------------------------------------------
nsresult nsCaret::StopBlinking()
{
if (mDrawn) // erase the caret if necessary
DrawCaret(PR_TRUE);
NS_ASSERTION(!mDrawn, "We just erased ourselves");
KillTimer();
return NS_OK;
}
PRBool
nsCaret::DrawAtPositionWithHint(nsIDOMNode* aNode,
PRInt32 aOffset,
nsFrameSelection::HINT aFrameHint,
PRUint8 aBidiLevel,
PRBool aInvalidate)
{
nsCOMPtr<nsIContent> contentNode = do_QueryInterface(aNode);
if (!contentNode)
return PR_FALSE;
nsIFrame* theFrame = nsnull;
PRInt32 theFrameOffset = 0;
nsresult rv = GetCaretFrameForNodeOffset(contentNode, aOffset, aFrameHint, aBidiLevel,
&theFrame, &theFrameOffset);
if (NS_FAILED(rv) || !theFrame)
return PR_FALSE;
// now we have a frame, check whether it's appropriate to show the caret here
const nsStyleUserInterface* userinterface = theFrame->GetStyleUserInterface();
if (
#ifdef SUPPORT_USER_MODIFY
// editable content still defaults to NS_STYLE_USER_MODIFY_READ_ONLY at present. See bug 15284
(userinterface->mUserModify == NS_STYLE_USER_MODIFY_READ_ONLY) ||
#endif
(userinterface->mUserInput == NS_STYLE_USER_INPUT_NONE) ||
(userinterface->mUserInput == NS_STYLE_USER_INPUT_DISABLED))
{
return PR_FALSE;
}
if (!mDrawn)
{
// save stuff so we can figure out what frame we're in later.
mLastContent = contentNode;
mLastContentOffset = aOffset;
mLastHint = aFrameHint;
mLastBidiLevel = aBidiLevel;
// If there has been a reflow, set the caret Bidi level to the level of the current frame
if (aBidiLevel & BIDI_LEVEL_UNDEFINED) {
nsFrameSelection* frameSelection = GetFrameSelection();
if (!frameSelection)
return NS_ERROR_FAILURE;
frameSelection->SetCaretBidiLevel(NS_GET_EMBEDDING_LEVEL(theFrame));
}
// Only update the caret's rect when we're not currently drawn.
rv = UpdateCaretRects(theFrame, theFrameOffset);
if (NS_FAILED(rv))
return PR_FALSE;
}
if (aInvalidate)
InvalidateRects(mCaretRect, mHookRect, theFrame);
return PR_TRUE;
}
NS_IMETHODIMP
nsCaret::GetCaretFrameForNodeOffset(nsIContent* aContentNode,
PRInt32 aOffset,
nsFrameSelection::HINT aFrameHint,
PRUint8 aBidiLevel,
nsIFrame** aReturnFrame,
PRInt32* aReturnOffset)
{
//get frame selection and find out what frame to use...
nsCOMPtr<nsIPresShell> presShell = do_QueryReferent(mPresShell);
if (!presShell)
return NS_ERROR_FAILURE;
nsFrameSelection* frameSelection = GetFrameSelection();
if (!frameSelection)
return NS_ERROR_FAILURE;
nsIFrame* theFrame = nsnull;
PRInt32 theFrameOffset = 0;
theFrame = frameSelection->GetFrameForNodeOffset(aContentNode, aOffset,
aFrameHint, &theFrameOffset);
if (!theFrame)
return NS_ERROR_FAILURE;
// Mamdouh : modification of the caret to work at rtl and ltr with Bidi
//
// Direction Style from this->GetStyleData()
// now in (visibility->mDirection)
// ------------------
// NS_STYLE_DIRECTION_LTR : LTR or Default
// NS_STYLE_DIRECTION_RTL
// NS_STYLE_DIRECTION_INHERIT
nsPresContext *presContext = presShell->GetPresContext();
if (presContext && presContext->BidiEnabled())
{
// If there has been a reflow, take the caret Bidi level to be the level of the current frame
if (aBidiLevel & BIDI_LEVEL_UNDEFINED)
aBidiLevel = NS_GET_EMBEDDING_LEVEL(theFrame);
PRInt32 start;
PRInt32 end;
nsIFrame* frameBefore;
nsIFrame* frameAfter;
PRUint8 levelBefore; // Bidi level of the character before the caret
PRUint8 levelAfter; // Bidi level of the character after the caret
theFrame->GetOffsets(start, end);
if (start == 0 || end == 0 || start == theFrameOffset || end == theFrameOffset)
{
nsPrevNextBidiLevels levels = frameSelection->
GetPrevNextBidiLevels(aContentNode, aOffset, PR_FALSE);
/* Boundary condition, we need to know the Bidi levels of the characters before and after the caret */
if (levels.mFrameBefore || levels.mFrameAfter)
{
frameBefore = levels.mFrameBefore;
frameAfter = levels.mFrameAfter;
levelBefore = levels.mLevelBefore;
levelAfter = levels.mLevelAfter;
if ((levelBefore != levelAfter) || (aBidiLevel != levelBefore))
{
aBidiLevel = PR_MAX(aBidiLevel, PR_MIN(levelBefore, levelAfter)); // rule c3
aBidiLevel = PR_MIN(aBidiLevel, PR_MAX(levelBefore, levelAfter)); // rule c4
if (aBidiLevel == levelBefore // rule c1
|| aBidiLevel > levelBefore && aBidiLevel < levelAfter && !((aBidiLevel ^ levelBefore) & 1) // rule c5
|| aBidiLevel < levelBefore && aBidiLevel > levelAfter && !((aBidiLevel ^ levelBefore) & 1)) // rule c9
{
if (theFrame != frameBefore)
{
if (frameBefore) // if there is a frameBefore, move into it
{
theFrame = frameBefore;
theFrame->GetOffsets(start, end);
theFrameOffset = end;
}
else
{
// if there is no frameBefore, we must be at the beginning of the line
// so we stay with the current frame.
// Exception: when the first frame on the line has a different Bidi level from the paragraph level, there is no
// real frame for the caret to be in. We have to find the visually first frame on the line.
PRUint8 baseLevel = NS_GET_BASE_LEVEL(frameAfter);
if (baseLevel != levelAfter)
{
nsPeekOffsetStruct pos;
pos.SetData(eSelectBeginLine, eDirPrevious, 0, 0, PR_FALSE, PR_TRUE, PR_FALSE, PR_TRUE);
if (NS_SUCCEEDED(frameAfter->PeekOffset(&pos))) {
theFrame = pos.mResultFrame;
theFrameOffset = pos.mContentOffset;
}
}
}
}
}
else if (aBidiLevel == levelAfter // rule c2
|| aBidiLevel > levelBefore && aBidiLevel < levelAfter && !((aBidiLevel ^ levelAfter) & 1) // rule c6
|| aBidiLevel < levelBefore && aBidiLevel > levelAfter && !((aBidiLevel ^ levelAfter) & 1)) // rule c10
{
if (theFrame != frameAfter)
{
if (frameAfter)
{
// if there is a frameAfter, move into it
theFrame = frameAfter;
theFrame->GetOffsets(start, end);
theFrameOffset = start;
}
else
{
// if there is no frameAfter, we must be at the end of the line
// so we stay with the current frame.
// Exception: when the last frame on the line has a different Bidi level from the paragraph level, there is no
// real frame for the caret to be in. We have to find the visually last frame on the line.
PRUint8 baseLevel = NS_GET_BASE_LEVEL(frameBefore);
if (baseLevel != levelBefore)
{
nsPeekOffsetStruct pos;
pos.SetData(eSelectEndLine, eDirNext, 0, 0, PR_FALSE, PR_TRUE, PR_FALSE, PR_TRUE);
if (NS_SUCCEEDED(frameBefore->PeekOffset(&pos))) {
theFrame = pos.mResultFrame;
theFrameOffset = pos.mContentOffset;
}
}
}
}
}
else if (aBidiLevel > levelBefore && aBidiLevel < levelAfter // rule c7/8
&& !((levelBefore ^ levelAfter) & 1) // before and after have the same parity
&& ((aBidiLevel ^ levelAfter) & 1)) // caret has different parity
{
if (NS_SUCCEEDED(frameSelection->GetFrameFromLevel(frameAfter, eDirNext, aBidiLevel, &theFrame)))
{
theFrame->GetOffsets(start, end);
levelAfter = NS_GET_EMBEDDING_LEVEL(theFrame);
if (aBidiLevel & 1) // c8: caret to the right of the rightmost character
theFrameOffset = (levelAfter & 1) ? start : end;
else // c7: caret to the left of the leftmost character
theFrameOffset = (levelAfter & 1) ? end : start;
}
}
else if (aBidiLevel < levelBefore && aBidiLevel > levelAfter // rule c11/12
&& !((levelBefore ^ levelAfter) & 1) // before and after have the same parity
&& ((aBidiLevel ^ levelAfter) & 1)) // caret has different parity
{
if (NS_SUCCEEDED(frameSelection->GetFrameFromLevel(frameBefore, eDirPrevious, aBidiLevel, &theFrame)))
{
theFrame->GetOffsets(start, end);
levelBefore = NS_GET_EMBEDDING_LEVEL(theFrame);
if (aBidiLevel & 1) // c12: caret to the left of the leftmost character
theFrameOffset = (levelBefore & 1) ? end : start;
else // c11: caret to the right of the rightmost character
theFrameOffset = (levelBefore & 1) ? start : end;
}
}
}
}
}
}
*aReturnFrame = theFrame;
*aReturnOffset = theFrameOffset;
return NS_OK;
}
//-----------------------------------------------------------------------------
void nsCaret::GetViewForRendering(nsIFrame *caretFrame,
EViewCoordinates coordType,
nsPoint &viewOffset,
nsIView **outRenderingView,
nsIView **outRelativeView)
{
if (!caretFrame || !outRenderingView)
return;
// XXX by Masayuki Nakano:
// This code is not good. This is adhoc approach.
// Our best approach is to use the event fired widget related view.
// But if we do so, we need large change for editor and this.
if (coordType == eIMECoordinates) {
#if defined(XP_MAC) || defined(XP_MACOSX) || defined(XP_WIN)
// #59405 and #313918, on Mac and Windows, the coordinate for IME need to be
// root view related.
coordType = eTopLevelWindowCoordinates;
#else
// #59405, on unix, the coordinate for IME need to be view
// (nearest native window) related.
coordType = eRenderingViewCoordinates;
#endif
}
*outRenderingView = nsnull;
if (outRelativeView)
*outRelativeView = nsnull;
NS_ASSERTION(caretFrame, "Should have a frame here");
viewOffset.x = 0;
viewOffset.y = 0;
nsPoint withinViewOffset(0, 0);
// get the offset of this frame from its parent view (walks up frame hierarchy)
nsIView* theView = nsnull;
caretFrame->GetOffsetFromView(withinViewOffset, &theView);
if (!theView)
return;
if (outRelativeView && coordType == eClosestViewCoordinates)
*outRelativeView = theView;
// Note: views are not refcounted.
nsIView* returnView = nsIView::GetViewFor(theView->GetNearestWidget(nsnull));
// This gets uses the first view with a widget
if (coordType == eRenderingViewCoordinates) {
if (returnView) {
// Now adjust the view offset for this view.
withinViewOffset += theView->GetOffsetTo(returnView);
// Account for the view's origin not lining up with the widget's
// (bug 190290)
withinViewOffset += returnView->GetPosition() -
returnView->GetBounds().TopLeft();
viewOffset = withinViewOffset;
if (outRelativeView)
*outRelativeView = returnView;
}
}
else {
// window-relative coordinates. Done for us by the view.
withinViewOffset += theView->GetOffsetTo(nsnull);
viewOffset = withinViewOffset;
// Get the relative view for top level window coordinates
if (outRelativeView && coordType == eTopLevelWindowCoordinates) {
nsCOMPtr<nsIPresShell> presShell = do_QueryReferent(mPresShell);
if (presShell) {
nsIViewManager* vm = presShell->GetViewManager();
if (vm) {
vm->GetRootView(*outRelativeView);
}
}
}
}
*outRenderingView = returnView;
}
/*-----------------------------------------------------------------------------
MustDrawCaret
FInd out if we need to do any caret drawing. This returns true if
either a) or b)
a) caret has been drawn, and we need to erase it.
b) caret is not drawn, and selection is collapsed
----------------------------------------------------------------------------- */
PRBool nsCaret::MustDrawCaret()
{
nsCOMPtr<nsIPresShell> presShell = do_QueryReferent(mPresShell);
if (presShell) {
PRBool isPaintingSuppressed;
presShell->IsPaintingSuppressed(&isPaintingSuppressed);
if (isPaintingSuppressed)
return PR_FALSE;
}
if (mDrawn)
return PR_TRUE;
nsCOMPtr<nsISelection> domSelection = do_QueryReferent(mDomSelectionWeak);
if (!domSelection)
return PR_FALSE;
PRBool isCollapsed;
if (NS_FAILED(domSelection->GetIsCollapsed(&isCollapsed)))
return PR_FALSE;
if (mShowDuringSelection)
return PR_TRUE; // show the caret even in selections
return isCollapsed;
}
/*-----------------------------------------------------------------------------
DrawCaret
----------------------------------------------------------------------------- */
void nsCaret::DrawCaret(PRBool aInvalidate)
{
// do we need to draw the caret at all?
if (!MustDrawCaret())
return;
nsCOMPtr<nsIDOMNode> node;
PRInt32 offset;
nsFrameSelection::HINT hint;
PRUint8 bidiLevel;
if (!mDrawn)
{
nsCOMPtr<nsISelection> domSelection = do_QueryReferent(mDomSelectionWeak);
nsCOMPtr<nsISelectionPrivate> privateSelection(do_QueryInterface(domSelection));
if (!privateSelection) return;
PRBool isCollapsed = PR_FALSE;
domSelection->GetIsCollapsed(&isCollapsed);
if (!mShowDuringSelection && !isCollapsed)
return;
PRBool hintRight;
privateSelection->GetInterlinePosition(&hintRight);//translate hint.
hint = hintRight ? nsFrameSelection::HINTRIGHT : nsFrameSelection::HINTLEFT;
// get the node and offset, which is where we want the caret to draw
domSelection->GetFocusNode(getter_AddRefs(node));
if (!node)
return;
if (NS_FAILED(domSelection->GetFocusOffset(&offset)))
return;
nsFrameSelection* frameSelection = GetFrameSelection();
if (!frameSelection)
return;
bidiLevel = frameSelection->GetCaretBidiLevel();
}
else
{
if (!mLastContent)
{
mDrawn = PR_FALSE;
return;
}
if (!mLastContent->IsInDoc())
{
mLastContent = nsnull;
mDrawn = PR_FALSE;
return;
}
node = do_QueryInterface(mLastContent);
offset = mLastContentOffset;
hint = mLastHint;
bidiLevel = mLastBidiLevel;
}
DrawAtPositionWithHint(node, offset, hint, bidiLevel, aInvalidate);
ToggleDrawnStatus();
}
nsresult nsCaret::UpdateCaretRects(nsIFrame* aFrame, PRInt32 aFrameOffset)
{
NS_ASSERTION(aFrame, "Should have a frame here");
nsRect frameRect = aFrame->GetRect();
frameRect.x = 0;
frameRect.y = 0;
nsCOMPtr<nsIPresShell> presShell = do_QueryReferent(mPresShell);
if (!presShell) return NS_ERROR_FAILURE;
nsPresContext *presContext = presShell->GetPresContext();
// if we got a zero-height frame, it's probably a BR frame at the end of a non-empty line
// (see BRFrame::Reflow). In that case, figure out a height. We have to do this
// after we've got an RC.
if (frameRect.height == 0)
{
nsIWidget *widget = aFrame->GetWindow();
if (!widget)
return NS_ERROR_FAILURE;
nsCOMPtr<nsIRenderingContext> rendContext;
nsresult rv = presContext->DeviceContext()->
CreateRenderingContext(widget, *getter_AddRefs(rendContext));
NS_ENSURE_SUCCESS(rv, rv);
if (!rendContext)
return NS_ERROR_UNEXPECTED;
const nsStyleFont* fontStyle = aFrame->GetStyleFont();
const nsStyleVisibility* vis = aFrame->GetStyleVisibility();
rendContext->SetFont(fontStyle->mFont, vis->mLangGroup);
nsCOMPtr<nsIFontMetrics> fm;
rendContext->GetFontMetrics(*getter_AddRefs(fm));
if (fm)
{
nscoord ascent, descent;
fm->GetMaxAscent(ascent);
fm->GetMaxDescent(descent);
frameRect.height = ascent + descent;
frameRect.y -= ascent; // BR frames sit on the baseline of the text, so we need to subtract
// the ascent to account for the frame height.
}
}
mCaretRect = frameRect;
nsCOMPtr<nsISelection> domSelection = do_QueryReferent(mDomSelectionWeak);
nsCOMPtr<nsISelectionPrivate> privateSelection = do_QueryInterface(domSelection);
nsPoint framePos;
// if cache in selection is available, apply it, else refresh it
nsresult rv = privateSelection->GetCachedFrameOffset(aFrame, aFrameOffset,
framePos);
if (NS_FAILED(rv))
{
mCaretRect.Empty();
return rv;
}
mCaretRect += framePos;
mCaretRect.width = mCaretTwipsWidth;
// on RTL frames the right edge of mCaretRect must be equal to framePos
const nsStyleVisibility* vis = aFrame->GetStyleVisibility();
if (NS_STYLE_DIRECTION_RTL == vis->mDirection)
mCaretRect.x -= mCaretRect.width;
return UpdateHookRect(presContext);
}
nsresult nsCaret::UpdateHookRect(nsPresContext* aPresContext)
{
mHookRect.Empty();
#ifdef IBMBIDI
// Simon -- make a hook to draw to the left or right of the caret to show keyboard language direction
PRBool bidiEnabled;
PRBool isCaretRTL=PR_FALSE;
nsIBidiKeyboard* bidiKeyboard = nsContentUtils::GetBidiKeyboard();
if (!bidiKeyboard || NS_FAILED(bidiKeyboard->IsLangRTL(&isCaretRTL)))
// if bidiKeyboard->IsLangRTL() failed, there is no way to tell the
// keyboard direction, or the user has no right-to-left keyboard
// installed, so we never draw the hook.
return NS_OK;
if (isCaretRTL)
{
bidiEnabled = PR_TRUE;
aPresContext->SetBidiEnabled(bidiEnabled);
}
else
bidiEnabled = aPresContext->BidiEnabled();
if (bidiEnabled)
{
if (isCaretRTL != mKeyboardRTL)
{
/* if the caret bidi level and the keyboard language direction are not in
* synch, the keyboard language must have been changed by the
* user, and if the caret is in a boundary condition (between left-to-right and
* right-to-left characters) it may have to change position to
* reflect the location in which the next character typed will
* appear. We will call |SelectionLanguageChange| and exit
* without drawing the caret in the old position.
*/
mKeyboardRTL = isCaretRTL;
nsCOMPtr<nsISelection> domSelection = do_QueryReferent(mDomSelectionWeak);
if (domSelection)
{
if (NS_SUCCEEDED(domSelection->SelectionLanguageChange(mKeyboardRTL)))
{
return NS_ERROR_FAILURE;
}
}
}
// If keyboard language is RTL, draw the hook on the left; if LTR, to the right
// The height of the hook rectangle is the same as the width of the caret
// rectangle.
mHookRect.SetRect(mCaretRect.x + ((isCaretRTL) ?
mBidiIndicatorTwipsSize * -1 :
mCaretRect.width),
mCaretRect.y + mBidiIndicatorTwipsSize,
mBidiIndicatorTwipsSize,
mCaretRect.width);
}
#endif //IBMBIDI
return NS_OK;
}
// static
void nsCaret::InvalidateRects(const nsRect &aRect, const nsRect &aHook,
nsIFrame *aFrame)
{
NS_ASSERTION(aFrame, "Must have a frame to invalidate");
nsRect rect;
rect.UnionRect(aRect, aHook);
aFrame->Invalidate(rect, PR_FALSE);
}
#ifdef XP_MAC
#pragma mark -
#endif
//-----------------------------------------------------------------------------
/* static */
void nsCaret::CaretBlinkCallback(nsITimer *aTimer, void *aClosure)
{
nsCaret *theCaret = NS_REINTERPRET_CAST(nsCaret*, aClosure);
if (!theCaret) return;
theCaret->DrawCaret(PR_TRUE);
}
//-----------------------------------------------------------------------------
nsFrameSelection* nsCaret::GetFrameSelection() {
nsCOMPtr<nsISelectionPrivate> privateSelection(do_QueryReferent(mDomSelectionWeak));
if (!privateSelection)
return nsnull;
nsCOMPtr<nsFrameSelection> frameSelection;
privateSelection->GetFrameSelection(getter_AddRefs(frameSelection));
return frameSelection;
}
//-----------------------------------------------------------------------------
nsresult NS_NewCaret(nsICaret** aInstancePtrResult)
{
NS_PRECONDITION(aInstancePtrResult, "null ptr");
nsCaret* caret = new nsCaret();
if (nsnull == caret)
return NS_ERROR_OUT_OF_MEMORY;
return caret->QueryInterface(NS_GET_IID(nsICaret), (void**) aInstancePtrResult);
}