gecko-dev/extensions/xforms/nsXFormsUtilityService.cpp

228 lines
8.2 KiB
C++

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Mozilla XForms support.
*
* The Initial Developer of the Original Code is
* IBM Corporation.
* Portions created by the Initial Developer are Copyright (C) 2004
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Aaron Reed <aaronr@us.ibm.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "nsXFormsUtilityService.h"
#include "nsXFormsUtils.h"
#include "nsIXTFElement.h"
#include "nsIDOMNode.h"
#include "nsIDOMElement.h"
#include "nsString.h"
#include "nsIDOMDocument.h"
#include "nsIXFormsModelElement.h"
#include "nsIDOMNodeList.h"
#include "nsIInstanceElementPrivate.h"
#include "nsIXFormsRepeatElement.h"
NS_IMPL_ISUPPORTS1(nsXFormsUtilityService, nsIXFormsUtilityService)
NS_IMETHODIMP
nsXFormsUtilityService::GetModelFromNode(nsIDOMNode *aNode,
nsIDOMNode **aModel)
{
nsCOMPtr<nsIDOMElement> element = do_QueryInterface(aNode);
NS_ASSERTION(aModel, "no return buffer, we'll crash soon");
*aModel = nsnull;
nsAutoString namespaceURI;
aNode->GetNamespaceURI(namespaceURI);
// If the node is in the XForms namespace and XTF based, then it should
// be able to be handled by GetModel. Otherwise it is probably an instance
// node in a instance document.
if (!namespaceURI.EqualsLiteral(NS_NAMESPACE_XFORMS)) {
return NS_ERROR_FAILURE;
}
nsCOMPtr<nsIModelElementPrivate> modelPriv = nsXFormsUtils::GetModel(element);
nsCOMPtr<nsIDOMNode> modelElement = do_QueryInterface(modelPriv);
if( modelElement ) {
NS_IF_ADDREF(*aModel = modelElement);
}
// No model found
NS_ENSURE_TRUE(*aModel, NS_ERROR_FAILURE);
return NS_OK;
}
/**
* Function to see if the given node is associated with the given model.
* Right now this function is only called by XPath in the case of the
* instance() function.
* The provided node can be an instance node from an instance
* document and thus be associated to the model in that way (model elements
* contain instance elements). Otherwise the node will be an XForms element
* that was used as the context node of the XPath expression (i.e the
* XForms control has an attribute that contains an XPath expression).
* Form controls are associated with model elements either explicitly through
* single-node binding or implicitly (if model cannot by calculated, it
* will use the first model element encountered in the document). The model
* can also be inherited from a containing element like xforms:group or
* xforms:repeat.
*/
NS_IMETHODIMP
nsXFormsUtilityService::IsNodeAssocWithModel( nsIDOMNode *aNode,
nsIDOMNode *aModel,
PRBool *aModelAssocWithNode)
{
nsCOMPtr<nsIDOMElement> element = do_QueryInterface(aNode);
nsAutoString namespaceURI;
aNode->GetNamespaceURI(namespaceURI);
// If the node is in the XForms namespace and XTF based, then it should
// be able to be handled by GetModel. Otherwise it is probably an instance
// node in a instance document.
if (namespaceURI.EqualsLiteral(NS_NAMESPACE_XFORMS)) {
nsCOMPtr<nsIModelElementPrivate> modelPriv = nsXFormsUtils::GetModel(element);
nsCOMPtr<nsIDOMNode> modelNode = do_QueryInterface(modelPriv);
if (modelNode && (modelNode == aModel)) {
*aModelAssocWithNode = PR_TRUE;
} else {
*aModelAssocWithNode = PR_FALSE;
}
} else {
// We are assuming that if the node coming in isn't a proper XForms element,
// then it is an instance element in an instance doc. Now we just have
// to determine if the given model contains this instance document.
nsCOMPtr<nsIDOMDocument> document;
aNode->GetOwnerDocument(getter_AddRefs(document));
*aModelAssocWithNode = PR_FALSE;
// Guess that we'd better make sure that it is a model
nsCOMPtr<nsIXFormsModelElement> modelEle = do_QueryInterface(aModel);
if (modelEle) {
// OK, we know that this is a model element. So now we have to go
// instance element by instance element and find the associated
// document. If it is equal to the document that contains aNode,
// then aNode is associated with this aModel element and we can return
// true.
nsCOMPtr<nsIModelElementPrivate>model = do_QueryInterface(modelEle);
nsCOMPtr<nsIInstanceElementPrivate> instElement;
nsCOMPtr<nsIDOMDocument> instDocument;
nsCOMArray<nsIInstanceElementPrivate> *instList = nsnull;
model->GetInstanceList(&instList);
NS_ENSURE_TRUE(instList, NS_ERROR_FAILURE);
for (int i = 0; i < instList->Count(); ++i) {
instElement = instList->ObjectAt(i);
instElement->GetDocument(getter_AddRefs(instDocument));
if (instDocument) {
if (instDocument == document) {
*aModelAssocWithNode = PR_TRUE;
break;
}
}
}
}
}
return NS_OK;
}
NS_IMETHODIMP
nsXFormsUtilityService::GetInstanceDocumentRoot(const nsAString& aID,
nsIDOMNode *aModelNode,
nsIDOMNode **aInstanceRoot)
{
nsresult rv = NS_ERROR_FAILURE;
NS_ASSERTION(aInstanceRoot, "no return buffer, we'll crash soon");
*aInstanceRoot = nsnull;
if (aID.IsEmpty()) {
return rv;
}
nsCOMPtr<nsIXFormsModelElement> modelElement = do_QueryInterface(aModelNode);
nsCOMPtr<nsIDOMDocument> doc;
rv = modelElement->GetInstanceDocument(aID, getter_AddRefs(doc));
NS_ENSURE_SUCCESS(rv, rv);
nsCOMPtr<nsIDOMElement> element;
rv = doc->GetDocumentElement(getter_AddRefs(element));
NS_ENSURE_SUCCESS(rv, rv);
if (element) {
NS_IF_ADDREF(*aInstanceRoot = element);
}
return rv;
}
/* Gotta do this via the service since we don't want transformiix to require
* any of the new extensions, like schema-validation
*/
NS_IMETHODIMP
nsXFormsUtilityService::ValidateString(const nsAString & aValue,
const nsAString & aType,
const nsAString & aNamespace,
PRBool *aResult)
{
// XXX TODO This function needs to call the XForms validator layer from
// bug 274083 when it goes into the build.
#if 0
nsresult rv = NS_ERROR_FAILURE;
nsXFormsSchemaValidator *validator = new nsXFormsSchemaValidator();
*aResult = validator->ValidateString(aValue, aType, aNamespace);
return rv;
#endif
return NS_ERROR_NOT_IMPLEMENTED;
}
NS_IMETHODIMP
nsXFormsUtilityService::GetRepeatIndex(nsIDOMNode *aRepeat, PRUint32 *aIndex)
{
NS_ASSERTION(aIndex, "no return buffer for index, we'll crash soon");
*aIndex = 0;
nsCOMPtr<nsIXFormsRepeatElement> repeatEle = do_QueryInterface(aRepeat);
///
/// @bug This should somehow end up in a NaN per the XForms 1.0 Errata (XXX)
return repeatEle ? repeatEle->GetIndex(aIndex) : NS_OK;
}