Magic-Mirror/gecko-dev
1
0
Fork 0
mirror of https://github.com/mozilla/gecko-dev.git synced 2024-11-08 20:47:44 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
2e823715a4
gecko-dev/dom/bluetooth/bluedroid/gonk/BluetoothServiceBluedroid.cpp

1420 lines
43 KiB
C++
Raw Blame History

/* -*- Mode: c++; c-basic-offset: 2; indent-tabs-mode: nil; tab-width: 40 -*- */
/* vim: set ts=2 et sw=2 tw=80: */
/*
** Copyright 2006, The Android Open Source Project
**
** Licensed under the Apache License, Version 2.0 (the "License");
** you may not use this file except in compliance with the License.
** You may obtain a copy of the License at
**
** http://www.apache.org/licenses/LICENSE-2.0
**
** Unless required by applicable law or agreed to in writing, software
** distributed under the License is distributed on an "AS IS" BASIS,
** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
** See the License for the specific language governing permissions and
** limitations under the License.
*/
#include "BluetoothServiceBluedroid.h"
#include <hardware/hardware.h>
#include "BluetoothA2dpManager.h"
#include "BluetoothHfpManager.h"
#include "BluetoothOppManager.h"
#include "BluetoothProfileController.h"
#include "BluetoothReplyRunnable.h"
#include "BluetoothUtils.h"
#include "BluetoothUuid.h"
#include "mozilla/dom/bluetooth/BluetoothTypes.h"
#include "mozilla/ipc/UnixSocket.h"
#include "mozilla/StaticMutex.h"
#include "mozilla/StaticPtr.h"
using namespace mozilla;
using namespace mozilla::ipc;
USING_BLUETOOTH_NAMESPACE
/**
* Static variables
*/
static bluetooth_device_t* sBtDevice;
static const bt_interface_t* sBtInterface;
static bool sAdapterDiscoverable = false;
static bool sIsBtEnabled = false;
static nsString sAdapterBdAddress;
static nsString sAdapterBdName;
static uint32_t sAdapterDiscoverableTimeout;
static InfallibleTArray<nsString> sAdapterBondedAddressArray;
static InfallibleTArray<BluetoothNamedValue> sRemoteDevicesPack;
static nsTArray<nsRefPtr<BluetoothProfileController> > sControllerArray;
static nsTArray<nsRefPtr<BluetoothReplyRunnable> > sBondingRunnableArray;
static nsTArray<nsRefPtr<BluetoothReplyRunnable> > sGetDeviceRunnableArray;
static nsTArray<nsRefPtr<BluetoothReplyRunnable> > sSetPropertyRunnableArray;
static nsTArray<nsRefPtr<BluetoothReplyRunnable> > sUnbondingRunnableArray;
static nsTArray<int> sRequestedDeviceCountArray;
static StaticAutoPtr<Monitor> sToggleBtMonitor;
/**
* Classes only used in this file
*/
class DistributeBluetoothSignalTask : public nsRunnable {
public:
DistributeBluetoothSignalTask(const BluetoothSignal& aSignal) :
mSignal(aSignal)
{
}
NS_IMETHOD
Run()
{
MOZ_ASSERT(NS_IsMainThread());
BluetoothService* bs = BluetoothService::Get();
NS_ENSURE_TRUE(bs, NS_ERROR_FAILURE);
bs->DistributeSignal(mSignal);
return NS_OK;
}
private:
BluetoothSignal mSignal;
};
class SetupAfterEnabledTask : public nsRunnable
{
public:
SetupAfterEnabledTask()
{ }
NS_IMETHOD
Run()
{
MOZ_ASSERT(NS_IsMainThread());
// Bluetooth scan mode is NONE by default
bt_scan_mode_t mode = BT_SCAN_MODE_CONNECTABLE;
bt_property_t prop;
prop.type = BT_PROPERTY_ADAPTER_SCAN_MODE;
prop.val = (void*)&mode;
prop.len = sizeof(mode);
NS_ENSURE_TRUE(sBtInterface, NS_ERROR_FAILURE);
int ret = sBtInterface->set_adapter_property(&prop);
if (ret != BT_STATUS_SUCCESS) {
BT_LOGR("Fail to set: BT_SCAN_MODE_CONNECTABLE");
}
// Try to fire event 'AdapterAdded' to fit the original behaviour when
// we used BlueZ as backend.
BluetoothService* bs = BluetoothService::Get();
NS_ENSURE_TRUE(bs, NS_ERROR_FAILURE);
bs->AdapterAddedReceived();
bs->TryFiringAdapterAdded();
// Trigger BluetoothOppManager to listen
BluetoothOppManager* opp = BluetoothOppManager::Get();
if (!opp || !opp->Listen()) {
BT_LOGR("Fail to start BluetoothOppManager listening");
}
return NS_OK;
}
};
/**
* Static callback functions
*/
static void
ClassToIcon(uint32_t aClass, nsAString& aRetIcon)
{
switch ((aClass & 0x1f00) >> 8) {
case 0x01:
aRetIcon.AssignLiteral("computer");
break;
case 0x02:
switch ((aClass & 0xfc) >> 2) {
case 0x01:
case 0x02:
case 0x03:
case 0x05:
aRetIcon.AssignLiteral("phone");
break;
case 0x04:
aRetIcon.AssignLiteral("modem");
break;
}
break;
case 0x03:
aRetIcon.AssignLiteral("network-wireless");
break;
case 0x04:
switch ((aClass & 0xfc) >> 2) {
case 0x01:
case 0x02:
case 0x06:
aRetIcon.AssignLiteral("audio-card");
break;
case 0x0b:
case 0x0c:
case 0x0d:
aRetIcon.AssignLiteral("camera-video");
break;
default:
aRetIcon.AssignLiteral("audio-card");
break;
}
break;
case 0x05:
switch ((aClass & 0xc0) >> 6) {
case 0x00:
switch ((aClass && 0x1e) >> 2) {
case 0x01:
case 0x02:
aRetIcon.AssignLiteral("input-gaming");
break;
}
break;
case 0x01:
aRetIcon.AssignLiteral("input-keyboard");
break;
case 0x02:
switch ((aClass && 0x1e) >> 2) {
case 0x05:
aRetIcon.AssignLiteral("input-tablet");
break;
default:
aRetIcon.AssignLiteral("input-mouse");
break;
}
}
break;
case 0x06:
if (aClass & 0x80) {
aRetIcon.AssignLiteral("printer");
break;
}
if (aClass & 0x20) {
aRetIcon.AssignLiteral("camera-photo");
break;
}
break;
}
}
static ControlPlayStatus
PlayStatusStringToControlPlayStatus(const nsAString& aPlayStatus)
{
ControlPlayStatus playStatus = ControlPlayStatus::PLAYSTATUS_UNKNOWN;
if (aPlayStatus.EqualsLiteral("STOPPED")) {
playStatus = ControlPlayStatus::PLAYSTATUS_STOPPED;
} else if (aPlayStatus.EqualsLiteral("PLAYING")) {
playStatus = ControlPlayStatus::PLAYSTATUS_PLAYING;
} else if (aPlayStatus.EqualsLiteral("PAUSED")) {
playStatus = ControlPlayStatus::PLAYSTATUS_PAUSED;
} else if (aPlayStatus.EqualsLiteral("FWD_SEEK")) {
playStatus = ControlPlayStatus::PLAYSTATUS_FWD_SEEK;
} else if (aPlayStatus.EqualsLiteral("REV_SEEK")) {
playStatus = ControlPlayStatus::PLAYSTATUS_REV_SEEK;
} else if (aPlayStatus.EqualsLiteral("ERROR")) {
playStatus = ControlPlayStatus::PLAYSTATUS_ERROR;
}
return playStatus;
}
static bool
IsReady()
{
if (!sBtInterface || !sIsBtEnabled) {
BT_LOGR("Warning! Bluetooth Service is not ready");
return false;
}
return true;
}
const bt_interface_t*
GetBluetoothInterface()
{
return sBtInterface;
}
void
StringToBdAddressType(const nsAString& aBdAddress,
bt_bdaddr_t *aRetBdAddressType)
{
const char* str = NS_ConvertUTF16toUTF8(aBdAddress).get();
for (int i = 0; i < 6; i++) {
aRetBdAddressType->address[i] = (uint8_t) strtoul(str, (char **)&str, 16);
str++;
}
}
void
BdAddressTypeToString(bt_bdaddr_t* aBdAddressType, nsAString& aRetBdAddress)
{
uint8_t* addr = aBdAddressType->address;
bdstr_t bdstr;
sprintf((char*)bdstr, "%02x:%02x:%02x:%02x:%02x:%02x",
(int)addr[0],(int)addr[1],(int)addr[2],
(int)addr[3],(int)addr[4],(int)addr[5]);
aRetBdAddress = NS_ConvertUTF8toUTF16((char*)bdstr);
}
static void
AdapterStateChangeCallback(bt_state_t aStatus)
{
MOZ_ASSERT(!NS_IsMainThread());
BT_LOGR("BT_STATE %d", aStatus);
sIsBtEnabled = (aStatus == BT_STATE_ON);
{
MonitorAutoLock lock(*sToggleBtMonitor);
lock.Notify();
}
if (sIsBtEnabled &&
NS_FAILED(NS_DispatchToMainThread(new SetupAfterEnabledTask()))) {
BT_WARNING("Failed to dispatch to main thread!");
}
}
/**
* AdapterPropertiesChangeCallback will be called after enable() but before
* AdapterStateChangeCallback sIsBtEnabled get updated.
* At that moment, both BluetoothManager/BluetoothAdapter does not register
* observer yet.
*/
static void
AdapterPropertiesChangeCallback(bt_status_t aStatus, int aNumProperties,
bt_property_t *aProperties)
{
MOZ_ASSERT(!NS_IsMainThread());
BluetoothValue propertyValue;
InfallibleTArray<BluetoothNamedValue> propertiesArray;
for (int i = 0; i < aNumProperties; i++) {
bt_property_t p = aProperties[i];
if (p.type == BT_PROPERTY_BDADDR) {
BdAddressTypeToString((bt_bdaddr_t*)p.val, sAdapterBdAddress);
propertyValue = sAdapterBdAddress;
propertiesArray.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("Address"), propertyValue));
} else if (p.type == BT_PROPERTY_BDNAME) {
// Construct nsCString here because Bd name returned from bluedroid
// is missing a null terminated character after SetProperty.
propertyValue = sAdapterBdName = NS_ConvertUTF8toUTF16(
nsCString((char*)p.val, p.len));
propertiesArray.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("Name"), propertyValue));
} else if (p.type == BT_PROPERTY_ADAPTER_SCAN_MODE) {
bt_scan_mode_t newMode = *(bt_scan_mode_t*)p.val;
if (newMode == BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE) {
propertyValue = sAdapterDiscoverable = true;
} else {
propertyValue = sAdapterDiscoverable = false;
}
propertiesArray.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("Discoverable"), propertyValue));
} else if (p.type == BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT) {
propertyValue = sAdapterDiscoverableTimeout = *(uint32_t*)p.val;
propertiesArray.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("DiscoverableTimeout"),
propertyValue));
} else if (p.type == BT_PROPERTY_ADAPTER_BONDED_DEVICES) {
// We have to cache addresses of bonded devices. Unlike BlueZ,
// bluedroid would not send an another BT_PROPERTY_ADAPTER_BONDED_DEVICES
// event after bond completed
bt_bdaddr_t* deviceBdAddressTypes = (bt_bdaddr_t*)p.val;
int numOfAddresses = p.len / BLUETOOTH_ADDRESS_BYTES;
BT_LOGD("Adapter property: BONDED_DEVICES. Count: %d", numOfAddresses);
// Whenever reloading paired devices, force refresh
sAdapterBondedAddressArray.Clear();
for (int index = 0; index < numOfAddresses; index++) {
nsAutoString deviceBdAddress;
BdAddressTypeToString(deviceBdAddressTypes + index, deviceBdAddress);
sAdapterBondedAddressArray.AppendElement(deviceBdAddress);
}
propertyValue = sAdapterBondedAddressArray;
propertiesArray.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("Devices"), propertyValue));
} else if (p.type == BT_PROPERTY_UUIDS) {
//FIXME: This will be implemented in the later patchset
return;
} else {
BT_LOGD("Unhandled adapter property type: %d", p.type);
return;
}
BluetoothValue value(propertiesArray);
BluetoothSignal signal(NS_LITERAL_STRING("PropertyChanged"),
NS_LITERAL_STRING(KEY_ADAPTER), value);
nsRefPtr<DistributeBluetoothSignalTask>
t = new DistributeBluetoothSignalTask(signal);
if (NS_FAILED(NS_DispatchToMainThread(t))) {
BT_WARNING("Failed to dispatch to main thread!");
}
// bluedroid BTU task was stored in the task queue, see GKI_send_msg
if (!sSetPropertyRunnableArray.IsEmpty()) {
DispatchBluetoothReply(sSetPropertyRunnableArray[0], BluetoothValue(true),
EmptyString());
sSetPropertyRunnableArray.RemoveElementAt(0);
}
}
}
/*
* RemoteDevicePropertiesChangeCallback will be called, as the
* following conditions:
* 1. When BT is turning on, bluedroid automatically execute this callback
* 2. When get_remote_device_properties()
*/
static void
RemoteDevicePropertiesChangeCallback(bt_status_t aStatus,
bt_bdaddr_t *aBdAddress,
int aNumProperties,
bt_property_t *aProperties)
{
MOZ_ASSERT(!NS_IsMainThread());
if (sRequestedDeviceCountArray.IsEmpty()) {
MOZ_ASSERT(sGetDeviceRunnableArray.IsEmpty());
return;
}
sRequestedDeviceCountArray[0]--;
InfallibleTArray<BluetoothNamedValue> props;
nsString remoteDeviceBdAddress;
BdAddressTypeToString(aBdAddress, remoteDeviceBdAddress);
props.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("Address"), remoteDeviceBdAddress));
for (int i = 0; i < aNumProperties; ++i) {
bt_property_t p = aProperties[i];
if (p.type == BT_PROPERTY_BDNAME) {
BluetoothValue propertyValue = NS_ConvertUTF8toUTF16((char*)p.val);
props.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("Name"), propertyValue));
} else if (p.type == BT_PROPERTY_CLASS_OF_DEVICE) {
uint32_t cod = *(uint32_t*)p.val;
props.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("Class"), BluetoothValue(cod)));
nsString icon;
ClassToIcon(cod, icon);
props.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("Icon"), BluetoothValue(icon)));
} else {
BT_LOGD("Other non-handled device properties. Type: %d", p.type);
}
}
// Use address as the index
sRemoteDevicesPack.AppendElement(
BluetoothNamedValue(remoteDeviceBdAddress, props));
if (sRequestedDeviceCountArray[0] == 0) {
MOZ_ASSERT(!sGetDeviceRunnableArray.IsEmpty());
if (sGetDeviceRunnableArray.IsEmpty()) {
BT_LOGR("No runnable to return");
return;
}
DispatchBluetoothReply(sGetDeviceRunnableArray[0],
sRemoteDevicesPack, EmptyString());
// After firing it, clean up cache
sRemoteDevicesPack.Clear();
sRequestedDeviceCountArray.RemoveElementAt(0);
sGetDeviceRunnableArray.RemoveElementAt(0);
}
}
static void
DeviceFoundCallback(int aNumProperties, bt_property_t *aProperties)
{
MOZ_ASSERT(!NS_IsMainThread());
BluetoothValue propertyValue;
InfallibleTArray<BluetoothNamedValue> propertiesArray;
for (int i = 0; i < aNumProperties; i++) {
bt_property_t p = aProperties[i];
if (p.type == BT_PROPERTY_BDADDR) {
nsString remoteDeviceBdAddress;
BdAddressTypeToString((bt_bdaddr_t*)p.val, remoteDeviceBdAddress);
propertyValue = remoteDeviceBdAddress;
propertiesArray.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("Address"), propertyValue));
} else if (p.type == BT_PROPERTY_BDNAME) {
propertyValue = NS_ConvertUTF8toUTF16((char*)p.val);
propertiesArray.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("Name"), propertyValue));
} else if (p.type == BT_PROPERTY_CLASS_OF_DEVICE) {
uint32_t cod = *(uint32_t*)p.val;
propertyValue = cod;
propertiesArray.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("Class"), propertyValue));
nsString icon;
ClassToIcon(cod, icon);
propertyValue = icon;
propertiesArray.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("Icon"), propertyValue));
} else {
BT_LOGD("Not handled remote device property: %d", p.type);
}
}
BluetoothValue value = propertiesArray;
BluetoothSignal signal(NS_LITERAL_STRING("DeviceFound"),
NS_LITERAL_STRING(KEY_ADAPTER), value);
nsRefPtr<DistributeBluetoothSignalTask>
t = new DistributeBluetoothSignalTask(signal);
if (NS_FAILED(NS_DispatchToMainThread(t))) {
BT_WARNING("Failed to dispatch to main thread!");
}
}
static void
DiscoveryStateChangedCallback(bt_discovery_state_t aState)
{
MOZ_ASSERT(!NS_IsMainThread());
bool isDiscovering = (aState == BT_DISCOVERY_STARTED);
BluetoothSignal signal(NS_LITERAL_STRING(DISCOVERY_STATE_CHANGED_ID),
NS_LITERAL_STRING(KEY_ADAPTER),
isDiscovering);
nsRefPtr<DistributeBluetoothSignalTask>
t = new DistributeBluetoothSignalTask(signal);
if (NS_FAILED(NS_DispatchToMainThread(t))) {
BT_WARNING("Failed to dispatch to main thread!");
}
}
static void
PinRequestCallback(bt_bdaddr_t* aRemoteBdAddress,
bt_bdname_t* aRemoteBdName, uint32_t aRemoteClass)
{
MOZ_ASSERT(!NS_IsMainThread());
InfallibleTArray<BluetoothNamedValue> propertiesArray;
nsAutoString remoteAddress;
BdAddressTypeToString(aRemoteBdAddress, remoteAddress);
propertiesArray.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("address"), remoteAddress));
propertiesArray.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("method"),
NS_LITERAL_STRING("pincode")));
propertiesArray.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("name"),
NS_ConvertUTF8toUTF16(
(const char*)aRemoteBdName->name)));
BluetoothValue value = propertiesArray;
BluetoothSignal signal(NS_LITERAL_STRING("RequestPinCode"),
NS_LITERAL_STRING(KEY_LOCAL_AGENT), value);
nsRefPtr<DistributeBluetoothSignalTask>
t = new DistributeBluetoothSignalTask(signal);
if (NS_FAILED(NS_DispatchToMainThread(t))) {
BT_WARNING("Failed to dispatch to main thread!");
}
}
static void
SspRequestCallback(bt_bdaddr_t* aRemoteBdAddress, bt_bdname_t* aRemoteBdName,
uint32_t aRemoteClass, bt_ssp_variant_t aPairingVariant,
uint32_t aPasskey)
{
MOZ_ASSERT(!NS_IsMainThread());
InfallibleTArray<BluetoothNamedValue> propertiesArray;
nsAutoString remoteAddress;
BdAddressTypeToString(aRemoteBdAddress, remoteAddress);
propertiesArray.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("address"), remoteAddress));
propertiesArray.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("method"),
NS_LITERAL_STRING("confirmation")));
propertiesArray.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("name"),
NS_ConvertUTF8toUTF16(
(const char*)aRemoteBdName->name)));
propertiesArray.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("passkey"), aPasskey));
BluetoothValue value = propertiesArray;
BluetoothSignal signal(NS_LITERAL_STRING("RequestConfirmation"),
NS_LITERAL_STRING(KEY_LOCAL_AGENT), value);
nsRefPtr<DistributeBluetoothSignalTask>
t = new DistributeBluetoothSignalTask(signal);
if (NS_FAILED(NS_DispatchToMainThread(t))) {
BT_WARNING("Failed to dispatch to main thread!");
}
}
static void
BondStateChangedCallback(bt_status_t aStatus, bt_bdaddr_t* aRemoteBdAddress,
bt_bond_state_t aState)
{
MOZ_ASSERT(!NS_IsMainThread());
nsAutoString remoteAddress;
BdAddressTypeToString(aRemoteBdAddress, remoteAddress);
// We don't need to handle bonding state
NS_ENSURE_TRUE_VOID(aState != BT_BOND_STATE_BONDING);
NS_ENSURE_FALSE_VOID(aState == BT_BOND_STATE_BONDED &&
sAdapterBondedAddressArray.Contains(remoteAddress));
bool bonded;
if (aState == BT_BOND_STATE_NONE) {
bonded = false;
sAdapterBondedAddressArray.RemoveElement(remoteAddress);
} else if (aState == BT_BOND_STATE_BONDED) {
bonded = true;
sAdapterBondedAddressArray.AppendElement(remoteAddress);
}
// Update bonded address list to BluetoothAdapter
InfallibleTArray<BluetoothNamedValue> propertiesChangeArray;
propertiesChangeArray.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("Devices"),
sAdapterBondedAddressArray));
BluetoothValue value(propertiesChangeArray);
BluetoothSignal signal(NS_LITERAL_STRING("PropertyChanged"),
NS_LITERAL_STRING(KEY_ADAPTER),
BluetoothValue(propertiesChangeArray));
NS_DispatchToMainThread(new DistributeBluetoothSignalTask(signal));
// Update bonding status to gaia
InfallibleTArray<BluetoothNamedValue> propertiesArray;
propertiesArray.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("address"), remoteAddress));
propertiesArray.AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("status"), bonded));
BluetoothSignal newSignal(NS_LITERAL_STRING(PAIRED_STATUS_CHANGED_ID),
NS_LITERAL_STRING(KEY_ADAPTER),
BluetoothValue(propertiesArray));
NS_DispatchToMainThread(new DistributeBluetoothSignalTask(newSignal));
if (bonded && !sBondingRunnableArray.IsEmpty()) {
DispatchBluetoothReply(sBondingRunnableArray[0],
BluetoothValue(true), EmptyString());
sBondingRunnableArray.RemoveElementAt(0);
} else if (!bonded && !sUnbondingRunnableArray.IsEmpty()) {
DispatchBluetoothReply(sUnbondingRunnableArray[0],
BluetoothValue(true), EmptyString());
sUnbondingRunnableArray.RemoveElementAt(0);
}
}
static void
AclStateChangedCallback(bt_status_t aStatus, bt_bdaddr_t* aRemoteBdAddress,
bt_acl_state_t aState)
{
//FIXME: This will be implemented in the later patchset
}
static void
CallbackThreadEvent(bt_cb_thread_evt evt)
{
//FIXME: This will be implemented in the later patchset
}
bt_callbacks_t sBluetoothCallbacks =
{
sizeof(sBluetoothCallbacks),
AdapterStateChangeCallback,
AdapterPropertiesChangeCallback,
RemoteDevicePropertiesChangeCallback,
DeviceFoundCallback,
DiscoveryStateChangedCallback,
PinRequestCallback,
SspRequestCallback,
BondStateChangedCallback,
AclStateChangedCallback,
CallbackThreadEvent
};
/**
* Static functions
*/
static bool
EnsureBluetoothHalLoad()
{
hw_module_t* module;
hw_device_t* device;
int err = hw_get_module(BT_HARDWARE_MODULE_ID, (hw_module_t const**)&module);
if (err != 0) {
BT_LOGR("Error: %s", strerror(err));
return false;
}
module->methods->open(module, BT_HARDWARE_MODULE_ID, &device);
sBtDevice = (bluetooth_device_t *)device;
sBtInterface = sBtDevice->get_bluetooth_interface();
int ret = sBtInterface->init(&sBluetoothCallbacks);
if (ret != BT_STATUS_SUCCESS) {
BT_LOGR("Error while setting the callbacks");
sBtInterface = nullptr;
}
return true;
}
static nsresult
StartStopGonkBluetooth(bool aShouldEnable)
{
MOZ_ASSERT(!NS_IsMainThread());
NS_ENSURE_TRUE(sBtInterface, NS_ERROR_FAILURE);
NS_ENSURE_TRUE(sIsBtEnabled != aShouldEnable, NS_OK);
int ret = aShouldEnable ? sBtInterface->enable() : sBtInterface->disable();
NS_ENSURE_TRUE(ret == BT_STATUS_SUCCESS, NS_ERROR_FAILURE);
MonitorAutoLock lock(*sToggleBtMonitor);
lock.Wait();
return NS_OK;
}
static void
ReplyStatusError(BluetoothReplyRunnable* aBluetoothReplyRunnable,
int aStatusCode, const nsAString& aCustomMsg)
{
MOZ_ASSERT(aBluetoothReplyRunnable, "Reply runnable is nullptr");
BT_LOGR("error code(%d)", aStatusCode);
nsAutoString replyError;
replyError.Assign(aCustomMsg);
if (aStatusCode == BT_STATUS_BUSY) {
replyError.AppendLiteral(":BT_STATUS_BUSY");
} else if (aStatusCode == BT_STATUS_NOT_READY) {
replyError.AppendLiteral(":BT_STATUS_NOT_READY");
} else if (aStatusCode == BT_STATUS_DONE) {
replyError.AppendLiteral(":BT_STATUS_DONE");
} else if (aStatusCode == BT_STATUS_AUTH_FAILURE) {
replyError.AppendLiteral(":BT_STATUS_AUTH_FAILURE");
} else if (aStatusCode == BT_STATUS_RMT_DEV_DOWN) {
replyError.AppendLiteral(":BT_STATUS_RMT_DEV_DOWN");
} else if (aStatusCode == BT_STATUS_FAIL) {
replyError.AppendLiteral(":BT_STATUS_FAIL");
}
DispatchBluetoothReply(aBluetoothReplyRunnable, BluetoothValue(true),
replyError);
}
/**
* Member functions
*/
BluetoothServiceBluedroid::BluetoothServiceBluedroid()
{
sToggleBtMonitor = new Monitor("BluetoothService.sToggleBtMonitor");
if (!EnsureBluetoothHalLoad()) {
BT_LOGR("Error! Failed to load bluedroid library.");
return;
}
// Register all the bluedroid callbacks before enable() get called
// It is required to register a2dp callbacks before a2dp media task starts up.
BluetoothHfpManager::Get();
BluetoothA2dpManager::Get();
}
BluetoothServiceBluedroid::~BluetoothServiceBluedroid()
{
sToggleBtMonitor = nullptr;
}
nsresult
BluetoothServiceBluedroid::StartInternal()
{
MOZ_ASSERT(!NS_IsMainThread());
nsresult ret = StartStopGonkBluetooth(true);
if (NS_FAILED(ret)) {
BT_LOGR("Error");
}
return ret;
}
nsresult
BluetoothServiceBluedroid::StopInternal()
{
MOZ_ASSERT(!NS_IsMainThread());
nsresult ret = StartStopGonkBluetooth(false);
if (NS_FAILED(ret)) {
BT_LOGR("Error");
}
return ret;
}
bool
BluetoothServiceBluedroid::IsEnabledInternal()
{
MOZ_ASSERT(!NS_IsMainThread());
return sIsBtEnabled;
}
nsresult
BluetoothServiceBluedroid::GetDefaultAdapterPathInternal(
BluetoothReplyRunnable* aRunnable)
{
MOZ_ASSERT(NS_IsMainThread());
nsRefPtr<BluetoothReplyRunnable> runnable(aRunnable);
BluetoothValue v = InfallibleTArray<BluetoothNamedValue>();
v.get_ArrayOfBluetoothNamedValue().AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("Address"), sAdapterBdAddress));
v.get_ArrayOfBluetoothNamedValue().AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("Name"), sAdapterBdName));
v.get_ArrayOfBluetoothNamedValue().AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("Discoverable"),
sAdapterDiscoverable));
v.get_ArrayOfBluetoothNamedValue().AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("DiscoverableTimeout"),
sAdapterDiscoverableTimeout));
v.get_ArrayOfBluetoothNamedValue().AppendElement(
BluetoothNamedValue(NS_LITERAL_STRING("Devices"),
sAdapterBondedAddressArray));
nsAutoString replyError;
DispatchBluetoothReply(runnable.get(), v, replyError);
runnable.forget();
return NS_OK;
}
nsresult
BluetoothServiceBluedroid::GetConnectedDevicePropertiesInternal(
uint16_t aServiceUuid, BluetoothReplyRunnable* aRunnable)
{
MOZ_ASSERT(NS_IsMainThread());
if (!IsReady()) {
NS_NAMED_LITERAL_STRING(errorStr, "Bluetooth service is not ready yet!");
DispatchBluetoothReply(aRunnable, BluetoothValue(), errorStr);
return NS_OK;
}
BluetoothProfileManagerBase* profile =
BluetoothUuidHelper::GetBluetoothProfileManager(aServiceUuid);
if (!profile) {
InfallibleTArray<BluetoothNamedValue> emptyArr;
DispatchBluetoothReply(aRunnable, emptyArr,
NS_LITERAL_STRING(ERR_UNKNOWN_PROFILE));
return NS_OK;
}
nsTArray<nsString> deviceAddresses;
if (profile->IsConnected()) {
nsString address;
profile->GetAddress(address);
deviceAddresses.AppendElement(address);
}
int requestedDeviceCount = deviceAddresses.Length();
if (requestedDeviceCount == 0) {
InfallibleTArray<BluetoothNamedValue> emptyArr;
DispatchBluetoothReply(aRunnable, emptyArr, EmptyString());
return NS_OK;
}
for (int i = 0; i < requestedDeviceCount; i++) {
// Retrieve all properties of devices
bt_bdaddr_t addressType;
StringToBdAddressType(deviceAddresses[i], &addressType);
int ret = sBtInterface->get_remote_device_properties(&addressType);
if (ret != BT_STATUS_SUCCESS) {
DispatchBluetoothReply(aRunnable, BluetoothValue(true),
NS_LITERAL_STRING("GetConnectedDeviceFailed"));
return NS_OK;
}
}
sRequestedDeviceCountArray.AppendElement(requestedDeviceCount);
sGetDeviceRunnableArray.AppendElement(aRunnable);
return NS_OK;
}
nsresult
BluetoothServiceBluedroid::GetPairedDevicePropertiesInternal(
const nsTArray<nsString>& aDeviceAddress, BluetoothReplyRunnable* aRunnable)
{
MOZ_ASSERT(NS_IsMainThread());
if (!IsReady()) {
NS_NAMED_LITERAL_STRING(errorStr, "Bluetooth service is not ready yet!");
DispatchBluetoothReply(aRunnable, BluetoothValue(), errorStr);
return NS_OK;
}
int requestedDeviceCount = aDeviceAddress.Length();
if (requestedDeviceCount == 0) {
InfallibleTArray<BluetoothNamedValue> emptyArr;
DispatchBluetoothReply(aRunnable, BluetoothValue(emptyArr), EmptyString());
return NS_OK;
}
for (int i = 0; i < requestedDeviceCount; i++) {
// Retrieve all properties of devices
bt_bdaddr_t addressType;
StringToBdAddressType(aDeviceAddress[i], &addressType);
int ret = sBtInterface->get_remote_device_properties(&addressType);
if (ret != BT_STATUS_SUCCESS) {
DispatchBluetoothReply(aRunnable, BluetoothValue(true),
NS_LITERAL_STRING("GetPairedDeviceFailed"));
return NS_OK;
}
}
sRequestedDeviceCountArray.AppendElement(requestedDeviceCount);
sGetDeviceRunnableArray.AppendElement(aRunnable);
return NS_OK;
}
nsresult
BluetoothServiceBluedroid::StartDiscoveryInternal(
BluetoothReplyRunnable* aRunnable)
{
MOZ_ASSERT(NS_IsMainThread());
if (!IsReady()) {
NS_NAMED_LITERAL_STRING(errorStr, "Bluetooth service is not ready yet!");
DispatchBluetoothReply(aRunnable, BluetoothValue(), errorStr);
return NS_OK;
}
int ret = sBtInterface->start_discovery();
if (ret != BT_STATUS_SUCCESS) {
ReplyStatusError(aRunnable, ret, NS_LITERAL_STRING("StartDiscovery"));
return NS_ERROR_FAILURE;
}
DispatchBluetoothReply(aRunnable, true, EmptyString());
return NS_OK;
}
nsresult
BluetoothServiceBluedroid::StopDiscoveryInternal(
BluetoothReplyRunnable* aRunnable)
{
MOZ_ASSERT(NS_IsMainThread());
if (!IsReady()) {
NS_NAMED_LITERAL_STRING(errorStr, "Bluetooth service is not ready yet!");
DispatchBluetoothReply(aRunnable, BluetoothValue(), errorStr);
return NS_OK;
}
int ret = sBtInterface->cancel_discovery();
if (ret != BT_STATUS_SUCCESS) {
ReplyStatusError(aRunnable, ret, NS_LITERAL_STRING("StopDiscovery"));
return NS_ERROR_FAILURE;
}
DispatchBluetoothReply(aRunnable, true, EmptyString());
return NS_OK;
}
nsresult
BluetoothServiceBluedroid::SetProperty(BluetoothObjectType aType,
const BluetoothNamedValue& aValue,
BluetoothReplyRunnable* aRunnable)
{
MOZ_ASSERT(NS_IsMainThread());
if (!IsReady()) {
NS_NAMED_LITERAL_STRING(errorStr, "Bluetooth service is not ready yet!");
DispatchBluetoothReply(aRunnable, BluetoothValue(), errorStr);
return NS_OK;
}
const nsString propName = aValue.name();
bt_property_t prop;
bt_scan_mode_t scanMode;
nsString str;
// For Bluedroid, it's necessary to check property name for SetProperty
if (propName.EqualsLiteral("Name")) {
prop.type = BT_PROPERTY_BDNAME;
} else if (propName.EqualsLiteral("Discoverable")) {
prop.type = BT_PROPERTY_ADAPTER_SCAN_MODE;
} else if (propName.EqualsLiteral("DiscoverableTimeout")) {
prop.type = BT_PROPERTY_ADAPTER_DISCOVERY_TIMEOUT;
} else {
BT_LOGR("Warning: Property type is not supported yet, type: %d", prop.type);
}
if (aValue.value().type() == BluetoothValue::Tuint32_t) {
// Set discoverable timeout
prop.val = (void*)aValue.value().get_uint32_t();
} else if (aValue.value().type() == BluetoothValue::TnsString) {
// Set name
str = aValue.value().get_nsString();
const char* name = NS_ConvertUTF16toUTF8(str).get();
prop.val = (void*)name;
prop.len = strlen(name);
} else if (aValue.value().type() == BluetoothValue::Tbool) {
scanMode = aValue.value().get_bool() ?
BT_SCAN_MODE_CONNECTABLE_DISCOVERABLE :
BT_SCAN_MODE_CONNECTABLE;
prop.val = (void*)&scanMode;
prop.len = sizeof(scanMode);
} else {
BT_LOGR("SetProperty but the property cannot be recognized correctly.");
return NS_OK;
}
sSetPropertyRunnableArray.AppendElement(aRunnable);
int ret = sBtInterface->set_adapter_property(&prop);
if (ret != BT_STATUS_SUCCESS) {
ReplyStatusError(aRunnable, ret, NS_LITERAL_STRING("SetProperty"));
}
return NS_OK;
}
nsresult
BluetoothServiceBluedroid::GetServiceChannel(
const nsAString& aDeviceAddress,
const nsAString& aServiceUuid,
BluetoothProfileManagerBase* aManager)
{
return NS_OK;
}
bool
BluetoothServiceBluedroid::UpdateSdpRecords(
const nsAString& aDeviceAddress,
BluetoothProfileManagerBase* aManager)
{
return true;
}
nsresult
BluetoothServiceBluedroid::CreatePairedDeviceInternal(
const nsAString& aDeviceAddress, int aTimeout,
BluetoothReplyRunnable* aRunnable)
{
MOZ_ASSERT(NS_IsMainThread());
if (!IsReady()) {
NS_NAMED_LITERAL_STRING(errorStr, "Bluetooth service is not ready yet!");
DispatchBluetoothReply(aRunnable, BluetoothValue(), errorStr);
return NS_OK;
}
bt_bdaddr_t remoteAddress;
StringToBdAddressType(aDeviceAddress, &remoteAddress);
int ret = sBtInterface->create_bond(&remoteAddress);
if (ret != BT_STATUS_SUCCESS) {
ReplyStatusError(aRunnable, ret, NS_LITERAL_STRING("CreatedPairedDevice"));
} else {
sBondingRunnableArray.AppendElement(aRunnable);
}
return NS_OK;
}
nsresult
BluetoothServiceBluedroid::RemoveDeviceInternal(
const nsAString& aDeviceAddress, BluetoothReplyRunnable* aRunnable)
{
MOZ_ASSERT(NS_IsMainThread());
if (!IsReady()) {
NS_NAMED_LITERAL_STRING(errorStr, "Bluetooth service is not ready yet!");
DispatchBluetoothReply(aRunnable, BluetoothValue(), errorStr);
return NS_OK;
}
bt_bdaddr_t remoteAddress;
StringToBdAddressType(aDeviceAddress, &remoteAddress);
int ret = sBtInterface->remove_bond(&remoteAddress);
if (ret != BT_STATUS_SUCCESS) {
ReplyStatusError(aRunnable, ret,
NS_LITERAL_STRING("RemoveDevice"));
} else {
sUnbondingRunnableArray.AppendElement(aRunnable);
}
return NS_OK;
}
bool
BluetoothServiceBluedroid::SetPinCodeInternal(
const nsAString& aDeviceAddress, const nsAString& aPinCode,
BluetoothReplyRunnable* aRunnable)
{
MOZ_ASSERT(NS_IsMainThread());
if (!IsReady()) {
NS_NAMED_LITERAL_STRING(errorStr, "Bluetooth service is not ready yet!");
DispatchBluetoothReply(aRunnable, BluetoothValue(), errorStr);
return false;
}
bt_bdaddr_t remoteAddress;
StringToBdAddressType(aDeviceAddress, &remoteAddress);
int ret = sBtInterface->pin_reply(
&remoteAddress, true, aPinCode.Length(),
(bt_pin_code_t*)NS_ConvertUTF16toUTF8(aPinCode).get());
if (ret != BT_STATUS_SUCCESS) {
ReplyStatusError(aRunnable, ret, NS_LITERAL_STRING("SetPinCode"));
} else {
DispatchBluetoothReply(aRunnable, BluetoothValue(true), EmptyString());
}
return true;
}
bool
BluetoothServiceBluedroid::SetPasskeyInternal(
const nsAString& aDeviceAddress, uint32_t aPasskey,
BluetoothReplyRunnable* aRunnable)
{
return true;
}
bool
BluetoothServiceBluedroid::SetPairingConfirmationInternal(
const nsAString& aDeviceAddress, bool aConfirm,
BluetoothReplyRunnable* aRunnable)
{
MOZ_ASSERT(NS_IsMainThread());
if (!IsReady()) {
NS_NAMED_LITERAL_STRING(errorStr, "Bluetooth service is not ready yet!");
DispatchBluetoothReply(aRunnable, BluetoothValue(), errorStr);
return false;
}
bt_bdaddr_t remoteAddress;
StringToBdAddressType(aDeviceAddress, &remoteAddress);
int ret = sBtInterface->ssp_reply(&remoteAddress, (bt_ssp_variant_t)0,
aConfirm, 0);
if (ret != BT_STATUS_SUCCESS) {
ReplyStatusError(aRunnable, ret,
NS_LITERAL_STRING("SetPairingConfirmation"));
} else {
DispatchBluetoothReply(aRunnable, BluetoothValue(true), EmptyString());
}
return true;
}
bool
BluetoothServiceBluedroid::SetAuthorizationInternal(
const nsAString& aDeviceAddress, bool aAllow,
BluetoothReplyRunnable* aRunnable)
{
return true;
}
nsresult
BluetoothServiceBluedroid::PrepareAdapterInternal()
{
return NS_OK;
}
static void
NextBluetoothProfileController()
{
MOZ_ASSERT(NS_IsMainThread());
// First, remove the task at the front which has been already done.
NS_ENSURE_FALSE_VOID(sControllerArray.IsEmpty());
sControllerArray.RemoveElementAt(0);
// Re-check if the task array is empty, if it's not, the next task will begin.
NS_ENSURE_FALSE_VOID(sControllerArray.IsEmpty());
sControllerArray[0]->Start();
}
static void
ConnectDisconnect(bool aConnect, const nsAString& aDeviceAddress,
BluetoothReplyRunnable* aRunnable,
uint16_t aServiceUuid, uint32_t aCod = 0)
{
MOZ_ASSERT(NS_IsMainThread());
MOZ_ASSERT(aRunnable);
BluetoothProfileController* controller =
new BluetoothProfileController(aConnect, aDeviceAddress, aRunnable,
NextBluetoothProfileController,
aServiceUuid, aCod);
sControllerArray.AppendElement(controller);
/**
* If the request is the first element of the quene, start from here. Note
* that other request is pushed into the quene and is popped out after the
* first one is completed. See NextBluetoothProfileController() for details.
*/
if (sControllerArray.Length() == 1) {
sControllerArray[0]->Start();
}
}
void
BluetoothServiceBluedroid::Connect(const nsAString& aDeviceAddress,
uint32_t aCod,
uint16_t aServiceUuid,
BluetoothReplyRunnable* aRunnable)
{
ConnectDisconnect(true, aDeviceAddress, aRunnable, aServiceUuid, aCod);
}
bool
BluetoothServiceBluedroid::IsConnected(uint16_t aProfileId)
{
return true;
}
void
BluetoothServiceBluedroid::Disconnect(
const nsAString& aDeviceAddress, uint16_t aServiceUuid,
BluetoothReplyRunnable* aRunnable)
{
ConnectDisconnect(false, aDeviceAddress, aRunnable, aServiceUuid);
}
void
BluetoothServiceBluedroid::SendFile(const nsAString& aDeviceAddress,
BlobParent* aBlobParent,
BlobChild* aBlobChild,
BluetoothReplyRunnable* aRunnable)
{
MOZ_ASSERT(NS_IsMainThread());
// Force to stop discovery, otherwise socket connecting would fail
if (!IsReady() || BT_STATUS_SUCCESS != sBtInterface->cancel_discovery()) {
NS_NAMED_LITERAL_STRING(errorStr, "Calling cancel_discovery() failed");
DispatchBluetoothReply(aRunnable, BluetoothValue(true), errorStr);
return;
}
// Currently we only support one device sending one file at a time,
// so we don't need aDeviceAddress here because the target device
// has been determined when calling 'Connect()'. Nevertheless, keep
// it for future use.
BluetoothOppManager* opp = BluetoothOppManager::Get();
nsAutoString errorStr;
if (!opp || !opp->SendFile(aDeviceAddress, aBlobParent)) {
errorStr.AssignLiteral("Calling SendFile() failed");
}
DispatchBluetoothReply(aRunnable, BluetoothValue(true), errorStr);
}
void
BluetoothServiceBluedroid::StopSendingFile(const nsAString& aDeviceAddress,
BluetoothReplyRunnable* aRunnable)
{
MOZ_ASSERT(NS_IsMainThread());
// Currently we only support one device sending one file at a time,
// so we don't need aDeviceAddress here because the target device
// has been determined when calling 'Connect()'. Nevertheless, keep
// it for future use.
BluetoothOppManager* opp = BluetoothOppManager::Get();
nsAutoString errorStr;
if (!opp || !opp->StopSendingFile()) {
errorStr.AssignLiteral("Calling StopSendingFile() failed");
}
DispatchBluetoothReply(aRunnable, BluetoothValue(true), errorStr);
}
void
BluetoothServiceBluedroid::ConfirmReceivingFile(
const nsAString& aDeviceAddress, bool aConfirm,
BluetoothReplyRunnable* aRunnable)
{
MOZ_ASSERT(NS_IsMainThread(), "Must be called from main thread!");
// Currently we only support one device sending one file at a time,
// so we don't need aDeviceAddress here because the target device
// has been determined when calling 'Connect()'. Nevertheless, keep
// it for future use.
BluetoothOppManager* opp = BluetoothOppManager::Get();
nsAutoString errorStr;
if (!opp || !opp->ConfirmReceivingFile(aConfirm)) {
errorStr.AssignLiteral("Calling ConfirmReceivingFile() failed");
}
DispatchBluetoothReply(aRunnable, BluetoothValue(true), errorStr);
}
void
BluetoothServiceBluedroid::ConnectSco(BluetoothReplyRunnable* aRunnable)
{
MOZ_ASSERT(NS_IsMainThread());
BluetoothHfpManager* hfp = BluetoothHfpManager::Get();
if (!hfp || !hfp->ConnectSco()) {
NS_NAMED_LITERAL_STRING(replyError, "Calling ConnectSco() failed");
DispatchBluetoothReply(aRunnable, BluetoothValue(), replyError);
return;
}
DispatchBluetoothReply(aRunnable, BluetoothValue(true), EmptyString());
}
void
BluetoothServiceBluedroid::DisconnectSco(BluetoothReplyRunnable* aRunnable)
{
MOZ_ASSERT(NS_IsMainThread());
BluetoothHfpManager* hfp = BluetoothHfpManager::Get();
if (!hfp || !hfp->DisconnectSco()) {
NS_NAMED_LITERAL_STRING(replyError, "Calling DisconnectSco() failed");
DispatchBluetoothReply(aRunnable, BluetoothValue(), replyError);
return;
}
DispatchBluetoothReply(aRunnable, BluetoothValue(true), EmptyString());
}
void
BluetoothServiceBluedroid::IsScoConnected(BluetoothReplyRunnable* aRunnable)
{
MOZ_ASSERT(NS_IsMainThread());
BluetoothHfpManager* hfp = BluetoothHfpManager::Get();
if (!hfp) {
NS_NAMED_LITERAL_STRING(replyError, "Fail to get BluetoothHfpManager");
DispatchBluetoothReply(aRunnable, BluetoothValue(), replyError);
return;
}
DispatchBluetoothReply(aRunnable, hfp->IsScoConnected(), EmptyString());
}
void
BluetoothServiceBluedroid::SendMetaData(const nsAString& aTitle,
const nsAString& aArtist,
const nsAString& aAlbum,
int64_t aMediaNumber,
int64_t aTotalMediaCount,
int64_t aDuration,
BluetoothReplyRunnable* aRunnable)
{
BluetoothA2dpManager* a2dp = BluetoothA2dpManager::Get();
if (a2dp) {
a2dp->UpdateMetaData(aTitle, aArtist, aAlbum, aMediaNumber,
aTotalMediaCount, aDuration);
}
DispatchBluetoothReply(aRunnable, BluetoothValue(true), EmptyString());
}
void
BluetoothServiceBluedroid::SendPlayStatus(
int64_t aDuration, int64_t aPosition,
const nsAString& aPlayStatus,
BluetoothReplyRunnable* aRunnable)
{
BluetoothA2dpManager* a2dp = BluetoothA2dpManager::Get();
if (a2dp) {
ControlPlayStatus playStatus =
PlayStatusStringToControlPlayStatus(aPlayStatus);
a2dp->UpdatePlayStatus(aDuration, aPosition, playStatus);
}
DispatchBluetoothReply(aRunnable, BluetoothValue(true), EmptyString());
}
void
BluetoothServiceBluedroid::UpdatePlayStatus(
uint32_t aDuration, uint32_t aPosition, ControlPlayStatus aPlayStatus)
{
// We don't need this function for bluedroid.
// In bluez, it only calls dbus api
// But it does not update BluetoothA2dpManager member fields
MOZ_ASSERT(false);
}
nsresult
BluetoothServiceBluedroid::SendSinkMessage(const nsAString& aDeviceAddresses,
const nsAString& aMessage)
{
return NS_OK;
}
nsresult
BluetoothServiceBluedroid::SendInputMessage(const nsAString& aDeviceAddresses,
const nsAString& aMessage)
{
return NS_OK;
}
void
BluetoothServiceBluedroid::AnswerWaitingCall(BluetoothReplyRunnable* aRunnable)
{
}
void
BluetoothServiceBluedroid::IgnoreWaitingCall(BluetoothReplyRunnable* aRunnable)
{
}
void
BluetoothServiceBluedroid::ToggleCalls(BluetoothReplyRunnable* aRunnable)
{
}
Reference in New Issue View Git Blame Copy Permalink