gecko-dev/layout/generic/nsBlockReflowState.h
dbaron%fas.harvard.edu 157c017816 Bug 86947:
Make the line list doubly linked and access it through a list class and iterators.
Stop recomputing margins on all of the children of each block in the reflow chain (which causes O(N^2) state recovery during incremental reflow).  Instead, add a second dirty bit to the lines and walk backwards through the line list to recompute vertical margins only when either dirty bit is set and the previous line was not reflowed.  Add nsIFrame::IsEmpty to identify frames through which margins collapse.
Fix O(N^2) propagation of float damage by maintaining a set of intervals damaged by floats (bug 61962) and be sure to damage the correct areas (bug 48138).
Introduce nsCollapsingMargin to do correct collapsing of combinations of positive and negative margins (bug 50142).
Clean up some odds and ends and fix another smaller O(N^2) problem in nsBlockFrame::AddFrames.
r=attinasi, rbs  sr=waterson
2001-10-25 01:08:40 +00:00

277 lines
9.0 KiB
C++

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: NPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Netscape Public License
* Version 1.1 (the "License"); you may not use this file except in
* compliance with the License. You may obtain a copy of the License at
* http://www.mozilla.org/NPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Mozilla Communicator client code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Steve Clark <buster@netscape.com>
* Robert O'Callahan <roc+moz@cs.cmu.edu>
* L. David Baron <dbaron@fas.harvard.edu>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the NPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the NPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifndef nsBlockReflowState_h__
#define nsBlockReflowState_h__
#include "nsBlockBandData.h"
#include "nsLineBox.h"
class nsBlockFrame;
class nsBlockReflowState {
public:
nsBlockReflowState(const nsHTMLReflowState& aReflowState,
nsIPresContext* aPresContext,
nsBlockFrame* aFrame,
const nsHTMLReflowMetrics& aMetrics,
PRBool aBlockMarginRoot);
~nsBlockReflowState();
/**
* Get the available reflow space for the current y coordinate. The
* available space is relative to our coordinate system (0,0) is our
* upper left corner.
*/
void GetAvailableSpace() {
GetAvailableSpace(mY);
}
void GetAvailableSpace(nscoord aY);
void InitFloater(nsLineLayout& aLineLayout,
nsPlaceholderFrame* aPlaceholderFrame);
void AddFloater(nsLineLayout& aLineLayout,
nsPlaceholderFrame* aPlaceholderFrame,
PRBool aInitialReflow);
PRBool CanPlaceFloater(const nsRect& aFloaterRect, PRUint8 aFloats);
void FlowAndPlaceFloater(nsFloaterCache* aFloaterCache,
PRBool* aIsLeftFloater);
void PlaceBelowCurrentLineFloaters(nsFloaterCacheList& aFloaters);
void ClearFloaters(nscoord aY, PRUint8 aBreakType);
PRBool ClearPastFloaters(PRUint8 aBreakType);
PRBool IsAdjacentWithTop() const {
return mY == mReflowState.mComputedBorderPadding.top;
}
const nsMargin& BorderPadding() const {
return mReflowState.mComputedBorderPadding;
}
const nsMargin& Margin() const {
return mReflowState.mComputedMargin;
}
void UpdateMaxElementSize(const nsSize& aMaxElementSize);
void UpdateMaximumWidth(nscoord aMaximumWidth);
// Reconstruct the previous bottom margin that goes above |aLine|.
void ReconstructMarginAbove(nsLineList::iterator aLine);
void ComputeBlockAvailSpace(nsIFrame* aFrame,
nsSplittableType aSplitType,
const nsStyleDisplay* aDisplay,
nsRect& aResult);
void RecoverStateFrom(nsLineList::iterator aLine,
nscoord aDeltaY);
void AdvanceToNextLine() {
mLineNumber++;
}
PRBool IsImpactedByFloater() const;
nsLineBox* NewLineBox(nsIFrame* aFrame, PRInt32 aCount, PRBool aIsBlock);
void FreeLineBox(nsLineBox* aLine);
void StoreMaxElementSize(nsIFrame* aFloater, const nsSize& aSize) {
mBand.StoreMaxElementSize(mPresContext, aFloater, aSize);
}
//----------------------------------------
// This state is the "global" state computed once for the reflow of
// the block.
// The block frame that is using this object
nsBlockFrame* mBlock;
nsIPresContext* mPresContext;
const nsHTMLReflowState& mReflowState;
nsISpaceManager* mSpaceManager;
// The coordinates within the spacemanager where the block is being
// placed <b>after</b> taking into account the blocks border and
// padding. This, therefore, represents the inner "content area" (in
// spacemanager coordinates) where child frames will be placed,
// including child blocks and floaters.
nscoord mSpaceManagerX, mSpaceManagerY;
// XXX get rid of this
nsReflowStatus mReflowStatus;
nscoord mBottomEdge;
// The content area to reflow child frames within. The x/y
// coordinates are known to be mBorderPadding.left and
// mBorderPadding.top. The width/height may be NS_UNCONSTRAINEDSIZE
// if the container reflowing this frame has given the frame an
// unconstrained area.
nsSize mContentArea;
//----------------------------------------
// This state is "running" state updated by the reflow of each line
// in the block. This same state is "recovered" when a line is not
// dirty and is passed over during incremental reflow.
// The current line being reflowed
// If it is mBlock->end_lines(), then it is invalid.
nsLineList::iterator mCurrentLine;
// The current Y coordinate in the block
nscoord mY;
// The available space within the current band.
nsRect mAvailSpaceRect;
// The maximum x-most of each line
nscoord mKidXMost;
// The combined area of all floaters placed so far
nsRect mFloaterCombinedArea;
// The y-coordinate of the last floater placed. We keep this around
// to enforce 9.5.1 rule [2]
nscoord mLastFloaterY;
// For unconstained-width reflow, we keep the right floaters
// combined area stored seperately.
PRBool mHaveRightFloaters;
nsRect mRightFloaterCombinedArea;
nsFloaterCacheFreeList mFloaterCacheFreeList;
// Previous child. This is used when pulling up a frame to update
// the sibling list.
nsIFrame* mPrevChild;
// The next immediate child frame that is the target of an
// incremental reflow command. Once that child has been reflowed we
// null this slot out.
nsIFrame* mNextRCFrame;
// The previous child frames collapsed bottom margin value.
nsCollapsingMargin mPrevBottomMargin;
// The current next-in-flow for the block. When lines are pulled
// from a next-in-flow, this is used to know which next-in-flow to
// pull from. When a next-in-flow is emptied of lines, we advance
// this to the next next-in-flow.
nsBlockFrame* mNextInFlow;
// The current band data for the current Y coordinate
nsBlockBandData mBand;
//----------------------------------------
// Temporary line-reflow state. This state is used during the reflow
// of a given line, but doesn't have meaning before or after.
// The list of floaters that are "current-line" floaters. These are
// added to the line after the line has been reflowed, to keep the
// list fiddling from being N^2.
nsFloaterCacheFreeList mCurrentLineFloaters;
// The list of floaters which are "below current-line"
// floaters. These are reflowed/placed after the line is reflowed
// and placed. Again, this is done to keep the list fiddling from
// being N^2.
nsFloaterCacheFreeList mBelowCurrentLineFloaters;
nsSize mMaxElementSize;
nscoord mMaximumWidth;
nscoord mMinLineHeight;
PRInt32 mLineNumber;
// block reflow state flags
#define BRS_UNCONSTRAINEDWIDTH 0x00000001
#define BRS_UNCONSTRAINEDHEIGHT 0x00000002
#define BRS_SHRINKWRAPWIDTH 0x00000004
#define BRS_NEEDRESIZEREFLOW 0x00000008
#define BRS_ISINLINEINCRREFLOW 0x00000010
#define BRS_NOWRAP 0x00000020
#define BRS_ISTOPMARGINROOT 0x00000040 // Is this frame a root for top/bottom margin collapsing?
#define BRS_ISBOTTOMMARGINROOT 0x00000080
#define BRS_APPLYTOPMARGIN 0x00000100 // See ShouldApplyTopMargin
#define BRS_COMPUTEMAXELEMENTSIZE 0x00000200
#define BRS_COMPUTEMAXWIDTH 0x00000400
#define BRS_LASTFLAG BRS_COMPUTEMAXWIDTH
PRInt16 mFlags;
void SetFlag(PRUint32 aFlag, PRBool aValue)
{
NS_ASSERTION(aFlag<=BRS_LASTFLAG, "bad flag");
NS_ASSERTION(aValue==PR_FALSE || aValue==PR_TRUE, "bad value");
if (aValue) { // set flag
mFlags |= aFlag;
}
else { // unset flag
mFlags &= ~aFlag;
}
}
PRBool GetFlag(PRUint32 aFlag) const
{
NS_ASSERTION(aFlag<=BRS_LASTFLAG, "bad flag");
PRBool result = (mFlags & aFlag);
if (result) return PR_TRUE;
return PR_FALSE;
}
};
#endif // nsBlockReflowState_h__