gecko-dev/image/decoders/EXIF.cpp

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* This Source Code Form is subject to the terms of the Mozilla Public
 * License, v. 2.0. If a copy of the MPL was not distributed with this
 * file, You can obtain one at http://mozilla.org/MPL/2.0/. */

#include "EXIF.h"

#include "mozilla/EndianUtils.h"

namespace mozilla {
namespace image {

// Section references in this file refer to the EXIF v2.3 standard, also known
// as CIPA DC-008-Translation-2010.

// See Section 4.6.4, Table 4.
// Typesafe enums are intentionally not used here since we're comparing to raw
// integers produced by parsing.
enum EXIFTag {
  OrientationTag = 0x112,
};

// See Section 4.6.2.
enum EXIFType {
  ByteType = 1,
  ASCIIType = 2,
  ShortType = 3,
  LongType = 4,
  RationalType = 5,
  UndefinedType = 7,
  SignedLongType = 9,
  SignedRational = 10,
};

static const char* EXIFHeader = "Exif\0\0";
static const uint32_t EXIFHeaderLength = 6;

/////////////////////////////////////////////////////////////
// Parse EXIF data, typically found in a JPEG's APP1 segment.
/////////////////////////////////////////////////////////////
EXIFData EXIFParser::ParseEXIF(const uint8_t* aData, const uint32_t aLength) {
  if (!Initialize(aData, aLength)) {
    return EXIFData();
  }

  if (!ParseEXIFHeader()) {
    return EXIFData();
  }

  uint32_t offsetIFD;
  if (!ParseTIFFHeader(offsetIFD)) {
    return EXIFData();
  }

  JumpTo(offsetIFD);

  Orientation orientation;
  if (!ParseIFD0(orientation)) {
    return EXIFData();
  }

  // We only care about orientation at this point, so we don't bother with the
  // other IFDs. If we got this far we're done.
  return EXIFData(orientation);
}

/////////////////////////////////////////////////////////
// Parse the EXIF header. (Section 4.7.2, Figure 30)
/////////////////////////////////////////////////////////
bool EXIFParser::ParseEXIFHeader() {
  return MatchString(EXIFHeader, EXIFHeaderLength);
}

/////////////////////////////////////////////////////////
// Parse the TIFF header. (Section 4.5.2, Table 1)
/////////////////////////////////////////////////////////
bool EXIFParser::ParseTIFFHeader(uint32_t& aIFD0OffsetOut) {
  // Determine byte order.
  if (MatchString("MM\0*", 4)) {
    mByteOrder = ByteOrder::BigEndian;
  } else if (MatchString("II*\0", 4)) {
    mByteOrder = ByteOrder::LittleEndian;
  } else {
    return false;
  }

  // Determine offset of the 0th IFD. (It shouldn't be greater than 64k, which
  // is the maximum size of the entry APP1 segment.)
  uint32_t ifd0Offset;
  if (!ReadUInt32(ifd0Offset) || ifd0Offset > 64 * 1024) {
    return false;
  }

  // The IFD offset is relative to the beginning of the TIFF header, which
  // begins after the EXIF header, so we need to increase the offset
  // appropriately.
  aIFD0OffsetOut = ifd0Offset + EXIFHeaderLength;
  return true;
}

/////////////////////////////////////////////////////////
// Parse the entries in IFD0. (Section 4.6.2)
/////////////////////////////////////////////////////////
bool EXIFParser::ParseIFD0(Orientation& aOrientationOut) {
  uint16_t entryCount;
  if (!ReadUInt16(entryCount)) {
    return false;
  }

  for (uint16_t entry = 0; entry < entryCount; ++entry) {
    // Read the fields of the entry.
    uint16_t tag;
    if (!ReadUInt16(tag)) {
      return false;
    }

    // Right now, we only care about orientation, so we immediately skip to the
    // next entry if we find anything else.
    if (tag != OrientationTag) {
      Advance(10);
      continue;
    }

    uint16_t type;
    if (!ReadUInt16(type)) {
      return false;
    }

    uint32_t count;
    if (!ReadUInt32(count)) {
      return false;
    }

    // We should have an orientation value here; go ahead and parse it.
    if (!ParseOrientation(type, count, aOrientationOut)) {
      return false;
    }

    // Since the orientation is all we care about, we're done.
    return true;
  }

  // We didn't find an orientation field in the IFD. That's OK; we assume the
  // default orientation in that case.
  aOrientationOut = Orientation();
  return true;
}

bool EXIFParser::ParseOrientation(uint16_t aType, uint32_t aCount,
                                  Orientation& aOut) {
  // Sanity check the type and count.
  if (aType != ShortType || aCount != 1) {
    return false;
  }

  uint16_t value;
  if (!ReadUInt16(value)) {
    return false;
  }

  switch (value) {
    case 1:
      aOut = Orientation(Angle::D0, Flip::Unflipped);
      break;
    case 2:
      aOut = Orientation(Angle::D0, Flip::Horizontal);
      break;
    case 3:
      aOut = Orientation(Angle::D180, Flip::Unflipped);
      break;
    case 4:
      aOut = Orientation(Angle::D180, Flip::Horizontal);
      break;
    case 5:
      aOut = Orientation(Angle::D90, Flip::Horizontal);
      break;
    case 6:
      aOut = Orientation(Angle::D90, Flip::Unflipped);
      break;
    case 7:
      aOut = Orientation(Angle::D270, Flip::Horizontal);
      break;
    case 8:
      aOut = Orientation(Angle::D270, Flip::Unflipped);
      break;
    default:
      return false;
  }

  // This is a 32-bit field, but the orientation value only occupies the first
  // 16 bits. We need to advance another 16 bits to consume the entire field.
  Advance(2);
  return true;
}

bool EXIFParser::Initialize(const uint8_t* aData, const uint32_t aLength) {
  if (aData == nullptr) {
    return false;
  }

  // An APP1 segment larger than 64k violates the JPEG standard.
  if (aLength > 64 * 1024) {
    return false;
  }

  mStart = mCurrent = aData;
  mLength = mRemainingLength = aLength;
  mByteOrder = ByteOrder::Unknown;
  return true;
}

void EXIFParser::Advance(const uint32_t aDistance) {
  if (mRemainingLength >= aDistance) {
    mCurrent += aDistance;
    mRemainingLength -= aDistance;
  } else {
    mCurrent = mStart;
    mRemainingLength = 0;
  }
}

void EXIFParser::JumpTo(const uint32_t aOffset) {
  if (mLength >= aOffset) {
    mCurrent = mStart + aOffset;
    mRemainingLength = mLength - aOffset;
  } else {
    mCurrent = mStart;
    mRemainingLength = 0;
  }
}

bool EXIFParser::MatchString(const char* aString, const uint32_t aLength) {
  if (mRemainingLength < aLength) {
    return false;
  }

  for (uint32_t i = 0; i < aLength; ++i) {
    if (mCurrent[i] != aString[i]) {
      return false;
    }
  }

  Advance(aLength);
  return true;
}

bool EXIFParser::MatchUInt16(const uint16_t aValue) {
  if (mRemainingLength < 2) {
    return false;
  }

  bool matched;
  switch (mByteOrder) {
    case ByteOrder::LittleEndian:
      matched = LittleEndian::readUint16(mCurrent) == aValue;
      break;
    case ByteOrder::BigEndian:
      matched = BigEndian::readUint16(mCurrent) == aValue;
      break;
    default:
      MOZ_ASSERT_UNREACHABLE("Should know the byte order by now");
      matched = false;
  }

  if (matched) {
    Advance(2);
  }

  return matched;
}

bool EXIFParser::ReadUInt16(uint16_t& aValue) {
  if (mRemainingLength < 2) {
    return false;
  }

  bool matched = true;
  switch (mByteOrder) {
    case ByteOrder::LittleEndian:
      aValue = LittleEndian::readUint16(mCurrent);
      break;
    case ByteOrder::BigEndian:
      aValue = BigEndian::readUint16(mCurrent);
      break;
    default:
      MOZ_ASSERT_UNREACHABLE("Should know the byte order by now");
      matched = false;
  }

  if (matched) {
    Advance(2);
  }

  return matched;
}

bool EXIFParser::ReadUInt32(uint32_t& aValue) {
  if (mRemainingLength < 4) {
    return false;
  }

  bool matched = true;
  switch (mByteOrder) {
    case ByteOrder::LittleEndian:
      aValue = LittleEndian::readUint32(mCurrent);
      break;
    case ByteOrder::BigEndian:
      aValue = BigEndian::readUint32(mCurrent);
      break;
    default:
      MOZ_ASSERT_UNREACHABLE("Should know the byte order by now");
      matched = false;
  }

  if (matched) {
    Advance(4);
  }

  return matched;
}

}  // namespace image
}  // namespace mozilla