gecko-dev/cmd/winfe/edcombtb.h
1998-09-10 21:15:28 +00:00

213 lines
8.3 KiB
C++

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
// edcombtb.h : header file
//
// Custom Toolbar class to facilitate using ComboBoxes in CToolBar type of toolbar
//
// Features:
// - Manages placement of CComboBox (or derived class) withing toolbar;
// (Owner creates the ComboBox(es) and manages messages)
// - Accessor functions are command ID - driven, rather than index into controll array
// - Easy to use Enable, SetCheck functions that redraw only when state changes
// - Allows user configuring: hiding controls with space compaction
// (relative position is cannot be changed, it just turn each on/off)
//
// Owner must fill comboboxes and manage command messages
//
// Created: 8/38/95 by Charles Manske
//
#ifdef EDITOR
#ifndef _EDCOMBTB_H
#define _EDCOMBTB_H
#include "edres2.h" // For IDD_CONFIG_COMBOBAR
#include "toolbar2.h"
#define SEPARATOR_WIDTH 8 // 6-pixel gap + 2 for overlap
// Use this ID to place-hold for ComboBox in ID Array
#define ID_COMBOBOX (UINT)-1
typedef struct _TB_CONTROLINFO {
UINT nID; // Button or combobox Command ID, or ID_SEPARATOR
BOOL bIsButton; // Test this for Check/Uncheck functions
BOOL bDoOnButtonDown; // Trigger action on button down (normal is button up)
int nImageIndex; // Relative to images in Bitmap (ignored for sep.,Combo)
int nWidth; // Width of separator or ComboBox
BOOL bShow; // If FALSE, control doesn't appear on toolbar
BOOL bComboBox; // TRUE if combobox
CComboBox * pComboBox; // Must be supplied by owner of ComboBox
} TB_CONTROLINFO, *LPTB_CONTROLINFO;
class CConfigComboBar;
/////////////////////////////////////////////////////////////////////////////
// CComboToolBar window
class CComboToolBar : public CToolBar
{
// Construction
public:
DECLARE_DYNAMIC(CComboToolBar)
CComboToolBar();
// Attributes
public:
// Should be same as public CToolTar::m_nCount (includes separators)
// int m_nItemCount;
int m_nButtonCount;
int m_nComboBoxCount;
int m_nControlCount; // Count of buttons + comboboxes
CSize m_sizeButton;
LPTB_CONTROLINFO m_pInfo;
SIZE m_sizeImage; // Size of 1 button image
UINT m_nIDBitmap;
private:
UINT m_nComboTop;
BOOL * m_pEnableConfig;
CNSToolbar2* m_pToolbar;
CView * m_pCommandView; //view to send button commands to.
#ifdef XP_WIN16
CNSToolTip * m_pToolTip;
#endif
// Operations
public:
// Combination of CToolBar::Create(), LoadBitmap(), and SetButtons()
// Assumes docking at all sides if no comboxes, or just Top or Bottom if combobox(es) used.
// If no nBitmapID, then only ComboBoxes in toolbar
//
// lpIDArray is same as for CToolBar, and MUST be supplied,
// But use ID_COMBOBOX to place-hold where comboboxes are desired
//
// nIDCount must be >=1
// All size values will assume Windows small-button guidelines defaults if 0
//
BOOL Create( BOOL bIsPageComposer, CWnd* pParent, UINT nIDBar, UINT nIDCaption,
UINT * pIDArray, int nIDCount, // Command ID array and count
UINT nIDBitmap, SIZE sizeButton, SIZE sizeImage );
BOOL CreateFloater(CWnd* pParent, UINT nIDBar, UINT nIDCaption,
UINT * pIDArray, int nIDCount, // Command ID array and count
UINT * pIDArray2,int nIDCount2,
UINT nIDBitmap, SIZE sizeButton, SIZE sizeImage, CView *pCommandView = NULL);
// After creating toobar, call this to enable/disable action on button down
// Used primarily when action is creation of a CDropdownToolbar
void SetDoOnButtonDown( UINT nID, BOOL bSet );
//need place to send commands in case this toolbar not in proper chain of messages.
void SetCommandView(CView *pView){ m_pCommandView = pView;}
// After creating toobar, call this to set combobox command ID and its full size
// (including dropdown height) of each combobox used
// If nHeight = 0, Height is calculated from number of items.
// Call in the same order as appearance in toolbar
void SetComboBox( UINT nID, CComboBox * pComboBox, UINT nWidth, UINT nListWidth, UINT nListHeight );
// Get the rect of a button in screen coordinates
// Used primarily with CDropdownToolbar
BOOL GetButtonRect( UINT nID, RECT * pRect );
// CToolBar has public GetCount() to return m_nCount
// inline UINT GetCount() { return m_nItemCount; }
inline UINT GetButtonCount() { return m_nButtonCount; }
inline UINT GetComboBoxCount() { return m_nComboBoxCount; }
// These are better than CCmdUI versions because they
// change state only if current state is different
void EnableAll( BOOL bEnable ); // Enable/Disable all controls
void Enable( UINT nID, BOOL bEnable ); // or just one
void _Enable( int iIndex, BOOL bEnable ); // Index into array of all controls
// Removes/Restores item from configure dialog
void EnableConfigure( UINT nID, BOOL bEnable );
// iCheck: 0 = no, 1 = checked, 2 = indeterminate
void SetCheck( UINT nID, int iCheck );
// Set all states with array of new values
void SetCheckAll( int * pCheckArray );
// SetCheck for just one item
void _SetCheck( int iIndex, int iCheck );
// Supply an array of new Show states for ALL items
// must point to array of length m_nCount;
void ShowAll( BOOL * pShowArray );
void Show( UINT nID, BOOL bShow ); // or change just one control
void ShowByIndex( int iIndex, BOOL bShow ); // or one control using index
// Allow user to select which controls to show/hide on the toolbar!
// void ConfigureToolBar(CWnd *pParent = NULL);
// Get pointer to toolbar item info
inline LPTB_CONTROLINFO GetInfoPtr() { return m_pInfo; }
// Use with GetWindowRect when real window
// size is needed for docked toolbars
// (GetWindowRect reports full client width if docked top/bottom,
// or client height if docked on side). If bCNSToolbar is true then include
// the CNSToolbar in the width.
int GetToolbarWidth(BOOL bCNSToolbar = TRUE);
//void GetToolbarWindowRect(RECT * pRect);
// Used after changing Show state of 1 or more items
// to move comboboxes and adjust spacing
// Use nStart to recalc starting at the control just changed
// Win16: This MUST be called at least once after all comboboxes
// are set and layout is final -- to assign Win16 tooltips
void RecalcLayout( int nStart = 0);
// Set a child toolbar to appear on the right side of this toolbar
void SetCNSToolbar(CNSToolbar2 *pToolbar);
// so we can pass this event on to the buttons
virtual void OnUpdateCmdUI( CFrameWnd* pTarget, BOOL bDisableIfNoHndler );
// How big do we need to be
CSize CalcDynamicLayout(int nLength, DWORD dwMode );
// Implementation
public:
virtual ~CComboToolBar();
virtual BOOL OnCommand(WPARAM wParam, LPARAM lParam );
// Generated message map functions
protected:
#ifdef XP_WIN16
BOOL PreTranslateMessage(MSG* pMsg); // For tooltip message routing
#endif
//{{AFX_MSG(CComboToolBar)
afx_msg void OnLButtonDown(UINT nFlags, CPoint point);
afx_msg void OnLButtonUp(UINT nFlags, CPoint point);
afx_msg void OnMouseMove(UINT nFlags, CPoint point);
afx_msg void OnSize( UINT nType, int cx, int cy );
//}}AFX_MSG
DECLARE_MESSAGE_MAP()
};
#endif // _EDCOMBTB_H
#endif // EDITOR