Magic-Mirror/gecko-dev
1
0
Fork 0
mirror of https://github.com/mozilla/gecko-dev.git synced 2024-10-31 14:15:30 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
4e91454ef0
gecko-dev/string/obsolete/nsString.h

562 lines
20 KiB
C++
Raw Blame History

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: NPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Netscape Public License
* Version 1.1 (the "License"); you may not use this file except in
* compliance with the License. You may obtain a copy of the License at
* http://www.mozilla.org/NPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Rick Gessner <rickg@netscape.com> (original author)
* Scott Collins <scc@mozilla.org>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the NPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the NPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/* nsString.h --- rickg's original strings of 1-byte chars, |nsCString| and |nsCAutoString|;
these classes will be replaced by the new shared-buffer string (see bug #53065)
*/
#ifndef _nsCString_
#define _nsCString_
/***********************************************************************
MODULE NOTES:
See nsStr.h for a more general description of string classes.
This version of the nsString class offers many improvements over the
original version:
1. Wide and narrow chars
2. Allocators
3. Much smarter autostrings
4. Subsumable strings
***********************************************************************/
#include "nsString2.h"
#include "prtypes.h"
#include "nscore.h"
#include <stdio.h>
#include "nsStr.h"
#include "nsIAtom.h"
#include "nsAString.h"
#include "nsXPIDLString.h"
/* this file will one day be _only_ a compatibility header for clients using the names
|ns[C]String| et al ... which we probably want to support forever.
In the mean time, people are used to getting the names |nsAReadable[C]String| and friends
from here as well; so we must continue to include the other compatibility headers
even though we don't use them ourself.
*/
#include "nsAWritableString.h"
// for compatibility
class NS_COM nsCString :
public nsAFlatCString,
public nsStr {
protected:
virtual const nsBufferHandle<char>* GetFlatBufferHandle() const;
virtual const char* GetReadableFragment( nsReadableFragment<char>&, nsFragmentRequest, PRUint32 ) const;
virtual char* GetWritableFragment( nsWritableFragment<char>&, nsFragmentRequest, PRUint32 );
public:
virtual const char* get() const { return mStr; }
public:
/**
* Default constructor.
*/
nsCString();
/**
* This is our copy constructor
* @param reference to another nsCString
*/
nsCString(const nsCString& aString);
explicit nsCString( const nsACString& );
explicit nsCString(const char*);
nsCString(const char*, PRInt32);
/**
* Destructor
*
*/
virtual ~nsCString();
/**
* Retrieve the length of this string
* @return string length
*/
virtual PRUint32 Length() const { return mLength; }
/**
* Retrieve the size of this string
* @return string length
*/
virtual void SizeOf(nsISizeOfHandler* aHandler, PRUint32* aResult) const;
/**
* Call this method if you want to force a different string capacity
* @update gess7/30/98
* @param aLength -- contains new length for mStr
* @return
*/
void SetLength(PRUint32 aLength);
/**
* Sets the new length of the string.
* @param aLength is new string length.
* @return nada
*/
void SetCapacity(PRUint32 aLength);
/**********************************************************************
Accessor methods...
*********************************************************************/
PRBool SetCharAt(PRUnichar aChar,PRUint32 anIndex);
/**********************************************************************
Lexomorphic transforms...
*********************************************************************/
/**
* Converts chars in this to lowercase
* @update gess 7/27/98
*/
void ToLowerCase();
/**
* Converts chars in this to lowercase, and
* stores them in aOut
* @update gess 7/27/98
* @param aOut is a string to contain result
*/
void ToLowerCase(nsCString& aString) const;
/**
* Converts chars in this to uppercase
* @update gess 7/27/98
*/
void ToUpperCase();
/**
* Converts chars in this to lowercase, and
* stores them in a given output string
* @update gess 7/27/98
* @param aOut is a string to contain result
*/
void ToUpperCase(nsCString& aString) const;
/**
* This method is used to remove all occurances of the
* characters found in aSet from this string.
*
* @param aSet -- characters to be cut from this
* @return *this
*/
void StripChars(const char* aSet);
void StripChar(PRUnichar aChar,PRInt32 anOffset=0);
void StripChar(char aChar,PRInt32 anOffset=0) { StripChar((PRUnichar) (unsigned char)aChar,anOffset); }
/**
* This method strips whitespace throughout the string
*
* @return this
*/
void StripWhitespace();
/**
* swaps occurence of 1 string for another
*
* @return this
*/
void ReplaceChar(PRUnichar aOldChar,PRUnichar aNewChar);
void ReplaceChar(const char* aSet,PRUnichar aNewChar);
void ReplaceSubstring(const nsCString& aTarget,const nsCString& aNewValue);
void ReplaceSubstring(const char* aTarget,const char* aNewValue);
/**
* This method trims characters found in aTrimSet from
* either end of the underlying string.
*
* @param aTrimSet -- contains chars to be trimmed from
* both ends
* @param aEliminateLeading
* @param aEliminateTrailing
* @param aIgnoreQuotes
* @return this
*/
void Trim(const char* aSet,PRBool aEliminateLeading=PR_TRUE,PRBool aEliminateTrailing=PR_TRUE,PRBool aIgnoreQuotes=PR_FALSE);
/**
* This method strips whitespace from string.
* You can control whether whitespace is yanked from
* start and end of string as well.
*
* @param aEliminateLeading controls stripping of leading ws
* @param aEliminateTrailing controls stripping of trailing ws
* @return this
*/
void CompressSet(const char* aSet, PRUnichar aChar,PRBool aEliminateLeading=PR_TRUE,PRBool aEliminateTrailing=PR_TRUE);
/**
* This method strips whitespace from string.
* You can control whether whitespace is yanked from
* start and end of string as well.
*
* @param aEliminateLeading controls stripping of leading ws
* @param aEliminateTrailing controls stripping of trailing ws
* @return this
*/
void CompressWhitespace( PRBool aEliminateLeading=PR_TRUE,PRBool aEliminateTrailing=PR_TRUE);
/**********************************************************************
string conversion methods...
*********************************************************************/
//#ifndef STANDALONE_STRING_TESTS
operator const char*() const {return (const char*)mStr;}
//#endif
/**
* Copies data from internal buffer onto given char* buffer
* NOTE: This only copies as many chars as will fit in given buffer (clips)
* @param aBuf is the buffer where data is stored
* @param aBuflength is the max # of chars to move to buffer
* @return ptr to given buffer
*/
char* ToCString(char* aBuf,PRUint32 aBufLength,PRUint32 anOffset=0) const;
/**
* Perform string to float conversion.
* @param aErrorCode will contain error if one occurs
* @return float rep of string value
*/
float ToFloat(PRInt32* aErrorCode) const;
/**
* Perform string to int conversion.
* @param aErrorCode will contain error if one occurs
* @param aRadix tells us which radix to assume; kAutoDetect tells us to determine the radix for you.
* @return int rep of string value, and possible (out) error code
*/
PRInt32 ToInteger(PRInt32* aErrorCode,PRUint32 aRadix=kRadix10) const;
/**********************************************************************
String manipulation methods...
*********************************************************************/
/**
* assign given string to this string
* @param aStr: buffer to be assigned to this
* @param aCount is the length of the given str (or -1) if you want me to determine its length
* NOTE: IFF you pass -1 as aCount, then your buffer must be null terminated.
*
* @return this
*/
nsCString& operator=( const nsCString& aString ) { Assign(aString); return *this; }
nsCString& operator=( const nsACString& aReadable ) { Assign(aReadable); return *this; }
//nsCString& operator=( const nsPromiseReadable<char>& aReadable ) { Assign(aReadable); return *this; }
nsCString& operator=( const char* aPtr ) { Assign(aPtr); return *this; }
nsCString& operator=( char aChar ) { Assign(aChar); return *this; }
void AssignWithConversion(const PRUnichar*,PRInt32=-1);
void AssignWithConversion( const nsString& aString );
void AssignWithConversion( const nsAString& aString );
void AssignWithConversion(PRUnichar);
/*
* Appends n characters from given string to this,
*
* @param aString is the source to be appended to this
* @param aCount -- number of chars to copy; -1 tells us to compute the strlen for you
* NOTE: IFF you pass -1 as aCount, then your buffer must be null terminated.
*
* @return number of chars copied
*/
void AppendWithConversion(const nsString&, PRInt32=-1);
void AppendWithConversion(PRUnichar aChar);
void AppendWithConversion( const nsAString& aString );
void AppendWithConversion(const PRUnichar*, PRInt32=-1);
// Why no |AppendWithConversion(const PRUnichar*, PRInt32)|? --- now I know, because implicit construction hid the need for this routine
void AppendInt(PRInt32 aInteger,PRInt32 aRadix=10); //radix=8,10 or 16
void AppendFloat( double aFloat );
void InsertWithConversion(PRUnichar aChar,PRUint32 anOffset);
// Why no |InsertWithConversion(PRUnichar*)|?
#if 0
virtual void do_AppendFromReadable( const nsACString& );
virtual void do_InsertFromReadable( const nsACString&, PRUint32 );
#endif
/**********************************************************************
Searching methods...
*********************************************************************/
/**
* Search for given substring within this string
*
* @param aString is substring to be sought in this
* @param aIgnoreCase selects case sensitivity
* @param anOffset tells us where in this strig to start searching
* @param aCount tells us how many iterations to make starting at the given offset
* @return offset in string, or -1 (kNotFound)
*/
PRInt32 Find(const nsStr& aString,PRBool aIgnoreCase=PR_FALSE,PRInt32 anOffset=0,PRInt32 aCount=-1) const;
PRInt32 Find(const char* aString,PRBool aIgnoreCase=PR_FALSE,PRInt32 anOffset=0,PRInt32 aCount=-1) const;
PRInt32 Find(const PRUnichar* aString,PRBool aIgnoreCase=PR_FALSE,PRInt32 anOffset=0,PRInt32 aCount=-1) const;
/**
* Search for given char within this string
*
* @param aString is substring to be sought in this
* @param anOffset tells us where in this strig to start searching
* @param aIgnoreCase selects case sensitivity
* @param aCount tells us how many iterations to make starting at the given offset
* @return find pos in string, or -1 (kNotFound)
*/
PRInt32 FindChar(PRUnichar aChar,PRBool aIgnoreCase=PR_FALSE,PRInt32 anOffset=0,PRInt32 aCount=-1) const;
/**
* This method searches this string for the first character
* found in the given charset
* @param aString contains set of chars to be found
* @param anOffset tells us where to start searching in this
* @return -1 if not found, else the offset in this
*/
PRInt32 FindCharInSet(const char* aString,PRInt32 anOffset=0) const;
PRInt32 FindCharInSet(const PRUnichar* aString,PRInt32 anOffset=0) const;
PRInt32 FindCharInSet(const nsStr& aString,PRInt32 anOffset=0) const;
/**
* This methods scans the string backwards, looking for the given string
* @param aString is substring to be sought in this
* @param aIgnoreCase tells us whether or not to do caseless compare
* @param aCount tells us how many iterations to make starting at the given offset
* @return offset in string, or -1 (kNotFound)
*/
PRInt32 RFind(const char* aCString,PRBool aIgnoreCase=PR_FALSE,PRInt32 anOffset=-1,PRInt32 aCount=-1) const;
PRInt32 RFind(const nsStr& aString,PRBool aIgnoreCase=PR_FALSE,PRInt32 anOffset=-1,PRInt32 aCount=-1) const;
PRInt32 RFind(const PRUnichar* aString,PRBool aIgnoreCase=PR_FALSE,PRInt32 anOffset=-1,PRInt32 aCount=-1) const;
/**
* Search for given char within this string
*
* @param aString is substring to be sought in this
* @param anOffset tells us where in this strig to start searching
* @param aIgnoreCase selects case sensitivity
* @return find pos in string, or -1 (kNotFound)
*/
PRInt32 RFindChar(PRUnichar aChar,PRBool aIgnoreCase=PR_FALSE,PRInt32 anOffset=-1,PRInt32 aCount=-1) const;
/**
* This method searches this string for the last character
* found in the given string
* @param aString contains set of chars to be found
* @param anOffset tells us where to start searching in this
* @return -1 if not found, else the offset in this
*/
PRInt32 RFindCharInSet(const char* aString,PRInt32 anOffset=-1) const;
PRInt32 RFindCharInSet(const PRUnichar* aString,PRInt32 anOffset=-1) const;
PRInt32 RFindCharInSet(const nsStr& aString,PRInt32 anOffset=-1) const;
/**********************************************************************
Comparison methods...
*********************************************************************/
/**
* Compares a given string type to this string.
* @update gess 7/27/98
* @param S is the string to be compared
* @param aIgnoreCase tells us how to treat case
* @param aCount tells us how many chars to compare
* @return -1,0,1
*/
PRInt32 CompareWithConversion(const PRUnichar* aString,PRBool aIgnoreCase=PR_FALSE,PRInt32 aCount=-1) const;
PRInt32 CompareWithConversion(const char* aString,PRBool aIgnoreCase=PR_FALSE,PRInt32 aCount=-1) const;
PRBool EqualsWithConversion(const nsString &aString,PRBool aIgnoreCase=PR_FALSE,PRInt32 aCount=-1) const;
PRBool EqualsWithConversion(const char* aString,PRBool aIgnoreCase=PR_FALSE,PRInt32 aCount=-1) const;
PRBool EqualsWithConversion(const PRUnichar* aString,PRBool aIgnoreCase=PR_FALSE,PRInt32 aCount=-1) const;
/* a hack to make sure things that used to compile continue to compile
even on compilers that don't have proper |explicit| support */
inline PRBool
EqualsWithConversion(const nsXPIDLString &aString, PRBool aIgnoreCase=PR_FALSE, PRInt32 aCount=-1) const
{
return EqualsWithConversion(aString.get(), aIgnoreCase, aCount);
}
PRBool EqualsIgnoreCase(const char* aString,PRInt32 aCount=-1) const;
PRBool EqualsIgnoreCase(const PRUnichar* aString,PRInt32 aCount=-1) const;
void DebugDump(void) const;
private:
// NOT TO BE IMPLEMENTED
// these signatures help clients not accidentally call the wrong thing helped by C++ automatic integral promotion
void operator=( PRUnichar );
void AssignWithConversion( char );
void AssignWithConversion( const char*, PRInt32=-1 );
void AppendWithConversion( char );
void InsertWithConversion( char, PRUint32 );
};
// NS_DEF_STRING_COMPARISON_OPERATORS(nsCString, char)
// NS_DEF_DERIVED_STRING_OPERATOR_PLUS(nsCString, char)
extern NS_COM int fputs(const nsCString& aString, FILE* out);
//ostream& operator<<(ostream& aStream,const nsCString& aString);
//virtual void DebugDump(ostream& aStream) const;
/**************************************************************
Here comes the AutoString class which uses internal memory
(typically found on the stack) for its default buffer.
If the buffer needs to grow, it gets reallocated on the heap.
**************************************************************/
class NS_COM nsCAutoString : public nsCString {
public:
virtual ~nsCAutoString();
nsCAutoString();
explicit nsCAutoString(const nsCString& );
explicit nsCAutoString(const nsACString& aString);
explicit nsCAutoString(const char* aString);
nsCAutoString(const char* aString,PRInt32 aLength);
explicit nsCAutoString(const CBufDescriptor& aBuffer);
nsCAutoString& operator=( const nsCAutoString& aString ) { Assign(aString); return *this; }
private:
void operator=( PRUnichar ); // NOT TO BE IMPLEMENTED
public:
nsCAutoString& operator=( const nsACString& aReadable ) { Assign(aReadable); return *this; }
// nsCAutoString& operator=( const nsPromiseReadable<char>& aReadable ) { Assign(aReadable); return *this; }
nsCAutoString& operator=( const char* aPtr ) { Assign(aPtr); return *this; }
nsCAutoString& operator=( char aChar ) { Assign(aChar); return *this; }
/**
* Retrieve the size of this string
* @return string length
*/
virtual void SizeOf(nsISizeOfHandler* aHandler, PRUint32* aResult) const;
char mBuffer[kDefaultStringSize];
};
// NS_DEF_DERIVED_STRING_OPERATOR_PLUS(nsCAutoString, char)
/**
* A helper class that converts a UCS2 string to UTF8
*/
class NS_COM NS_ConvertUCS2toUTF8
: public nsCAutoString
/*
...
*/
{
public:
explicit
NS_ConvertUCS2toUTF8( const PRUnichar* aString )
{
Append( aString, ~PRUint32(0) /* MAXINT */);
}
NS_ConvertUCS2toUTF8( const PRUnichar* aString, PRUint32 aLength )
{
Append( aString, aLength );
}
explicit NS_ConvertUCS2toUTF8( const nsAString& aString );
protected:
void Append( const PRUnichar* aString, PRUint32 aLength );
private:
// NOT TO BE IMPLEMENTED
NS_ConvertUCS2toUTF8( char );
operator const char*() const; // use |get()|
};
/**
* A helper class that converts a UCS2 string to ASCII in a lossy manner
*/
class NS_COM NS_LossyConvertUCS2toASCII
: public nsCAutoString
/*
...
*/
{
public:
explicit
NS_LossyConvertUCS2toASCII( const PRUnichar* aString )
{
AppendWithConversion( aString, ~PRUint32(0) /* MAXINT */);
}
NS_LossyConvertUCS2toASCII( const PRUnichar* aString, PRUint32 aLength )
{
AppendWithConversion( aString, aLength );
}
explicit NS_LossyConvertUCS2toASCII( const nsAString& aString );
private:
// NOT TO BE IMPLEMENTED
NS_LossyConvertUCS2toASCII( char );
operator const char*() const; // use |get()|
};
#endif
Reference in New Issue View Git Blame Copy Permalink