Magic-Mirror/gecko-dev
1
0
Fork 0
mirror of https://github.com/mozilla/gecko-dev.git synced 2024-11-06 09:05:45 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
4fc0e35c4e
gecko-dev/mailnews/base/util/nsMsgProtocol.cpp
naving%netscape.com 14e2c57ec3 108276. Open the mailbox in PR_RDONLY mode because only read operations are done using 
this connection. should cut down closing mailbox (PR_Close()) time.
2001-11-06 04:25:28 +00:00

1239 lines
38 KiB
C++
Raw Blame History

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: NPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Netscape Public License
* Version 1.1 (the "License"); you may not use this file except in
* compliance with the License. You may obtain a copy of the License at
* http://www.mozilla.org/NPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the NPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the NPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "msgCore.h"
#include "nsReadableUtils.h"
#include "nsMsgProtocol.h"
#include "nsIMsgMailNewsUrl.h"
#include "nsISocketTransportService.h"
#include "nsXPIDLString.h"
#include "nsSpecialSystemDirectory.h"
#include "nsILoadGroup.h"
#include "nsIIOService.h"
#include "nsNetUtil.h"
#include "nsIFileChannel.h"
#include "nsFileStream.h"
#include "nsIFileTransportService.h"
#include "nsIDNSService.h"
#include "nsIMsgWindow.h"
#include "nsIMsgStatusFeedback.h"
#include "nsIWebProgressListener.h"
#include "nsIPipe.h"
#include "nsIPrompt.h"
#include "prprf.h"
#include "nsIStringBundle.h"
static NS_DEFINE_CID(kSocketTransportServiceCID, NS_SOCKETTRANSPORTSERVICE_CID);
static NS_DEFINE_CID(kIOServiceCID, NS_IOSERVICE_CID);
static NS_DEFINE_CID(kFileTransportServiceCID, NS_FILETRANSPORTSERVICE_CID);
static NS_DEFINE_CID(kStringBundleServiceCID, NS_STRINGBUNDLESERVICE_CID);
NS_IMPL_THREADSAFE_ADDREF(nsMsgProtocol)
NS_IMPL_THREADSAFE_RELEASE(nsMsgProtocol)
NS_INTERFACE_MAP_BEGIN(nsMsgProtocol)
NS_INTERFACE_MAP_ENTRY_AMBIGUOUS(nsISupports, nsIChannel)
NS_INTERFACE_MAP_ENTRY(nsIStreamListener)
NS_INTERFACE_MAP_ENTRY(nsIRequestObserver)
NS_INTERFACE_MAP_ENTRY(nsIChannel)
NS_INTERFACE_MAP_ENTRY(nsIRequest)
NS_INTERFACE_MAP_END_THREADSAFE
static PRUnichar *GetStringByID(PRInt32 stringID);
nsMsgProtocol::nsMsgProtocol(nsIURI * aURL)
{
NS_INIT_REFCNT();
m_flags = 0;
m_startPosition = 0;
m_readCount = 0;
mLoadFlags = 0;
m_socketIsOpen = PR_FALSE;
m_tempMsgFileSpec = nsSpecialSystemDirectory(nsSpecialSystemDirectory::OS_TemporaryDirectory);
m_tempMsgFileSpec += "tempMessage.eml";
mSuppressListenerNotifications = PR_FALSE;
InitFromURI(aURL);
}
nsresult nsMsgProtocol::InitFromURI(nsIURI *aUrl)
{
m_url = aUrl;
nsCOMPtr <nsIMsgMailNewsUrl> mailUrl = do_QueryInterface(aUrl);
if (mailUrl)
{
mailUrl->GetLoadGroup(getter_AddRefs(m_loadGroup));
nsCOMPtr<nsIMsgStatusFeedback> statusFeedback;
mailUrl->GetStatusFeedback(getter_AddRefs(statusFeedback));
mProgressEventSink = do_QueryInterface(statusFeedback);
}
return NS_OK;
}
nsMsgProtocol::~nsMsgProtocol()
{}
nsresult
nsMsgProtocol::OpenNetworkSocketWithInfo(const char * aHostName,
PRInt32 aGetPort,
const char *connectionType,
nsIInterfaceRequestor* callbacks)
{
NS_ENSURE_ARG(aHostName);
nsresult rv = NS_OK;
nsCOMPtr<nsISocketTransportService> socketService (do_GetService(kSocketTransportServiceCID));
NS_ENSURE_TRUE(socketService, NS_ERROR_FAILURE);
// with socket connections we want to read as much data as arrives
m_readCount = -1;
m_startPosition = 0;
rv = socketService->CreateTransportOfType(connectionType, aHostName,
aGetPort, nsnull, 0, 0,
getter_AddRefs(m_transport));
if (NS_FAILED(rv)) return rv;
m_transport->SetNotificationCallbacks(callbacks, PR_FALSE);
m_socketIsOpen = PR_FALSE;
return SetupTransportState();
}
// open a connection on this url
nsresult
nsMsgProtocol::OpenNetworkSocket(nsIURI * aURL, const char *connectionType,
nsIInterfaceRequestor* callbacks)
{
NS_ENSURE_ARG(aURL);
nsXPIDLCString hostName;
PRInt32 port = 0;
aURL->GetPort(&port);
aURL->GetHost(getter_Copies(hostName));
return OpenNetworkSocketWithInfo(hostName, port, connectionType, callbacks);
}
nsresult nsMsgProtocol::GetFileFromURL(nsIURI * aURL, nsIFile **aResult)
{
NS_ENSURE_ARG_POINTER(aURL);
NS_ENSURE_ARG_POINTER(aResult);
// extract the file path from the uri...
nsXPIDLCString filePath;
aURL->GetPath(getter_Copies(filePath));
nsCAutoString urlSpec("file://");
urlSpec.Append(filePath.get());
nsresult rv;
// dougt - there should be an easier way!
nsCOMPtr<nsIURI> uri;
if (NS_FAILED(rv = NS_NewURI(getter_AddRefs(uri), urlSpec.get())))
return rv;
nsCOMPtr<nsIFileURL> fileURL = do_QueryInterface(uri);
if (!fileURL) return NS_ERROR_FAILURE;
return fileURL->GetFile(aResult);
// dougt
}
nsresult nsMsgProtocol::OpenFileSocket(nsIURI * aURL, PRUint32 aStartPosition, PRInt32 aReadCount)
{
// mscott - file needs to be encoded directly into aURL. I should be able to get
// rid of this method completely.
nsresult rv = NS_OK;
m_startPosition = aStartPosition;
m_readCount = aReadCount;
nsCOMPtr <nsIFile> file;
rv = GetFileFromURL(aURL, getter_AddRefs(file));
NS_ENSURE_SUCCESS(rv, rv);
nsCOMPtr<nsIFileTransportService> fts =
do_GetService(kFileTransportServiceCID, &rv);
if (NS_FAILED(rv)) return rv;
//we are always using this file socket to read data from the mailbox.
rv = fts->CreateTransport(file, PR_RDONLY,
0664, getter_AddRefs(m_transport));
m_socketIsOpen = PR_FALSE;
return rv;
}
nsresult nsMsgProtocol::SetupTransportState()
{
nsresult rv = NS_OK;
if (!m_socketIsOpen && m_transport)
{
rv = m_transport->OpenOutputStream(0, PRUint32(-1), 0, getter_AddRefs(m_outputStream));
NS_ASSERTION(NS_SUCCEEDED(rv), "unable to create an output stream");
// we want to open the stream
} // if m_transport
return rv;
}
nsresult nsMsgProtocol::CloseSocket()
{
nsresult rv = NS_OK;
// release all of our socket state
m_socketIsOpen = PR_FALSE;
m_outputStream = nsnull;
if (m_transport)
m_transport->SetNotificationCallbacks(nsnull, PR_FALSE);
// we need to call Cancel so that we remove the socket transport from the mActiveTransportList. see bug #30648
if (m_request) {
rv = m_request->Cancel(NS_BINDING_ABORTED);
}
m_request = 0;
m_transport = 0;
return rv;
}
/*
* Writes the data contained in dataBuffer into the current output stream. It also informs
* the transport layer that this data is now available for transmission.
* Returns a positive number for success, 0 for failure (not all the bytes were written to the
* stream, etc). We need to make another pass through this file to install an error system (mscott)
*
* No logging is done in the base implementation, so aSuppressLogging is ignored.
*/
PRInt32 nsMsgProtocol::SendData(nsIURI * aURL, const char * dataBuffer, PRBool aSuppressLogging)
{
PRUint32 writeCount = 0;
PRInt32 status = 0;
// NS_PRECONDITION(m_outputStream, "oops....we don't have an output stream...how did that happen?");
if (dataBuffer && m_outputStream)
{
status = m_outputStream->Write(dataBuffer, PL_strlen(dataBuffer), &writeCount);
}
return status;
}
// Whenever data arrives from the connection, core netlib notifices the protocol by calling
// OnDataAvailable. We then read and process the incoming data from the input stream.
NS_IMETHODIMP nsMsgProtocol::OnDataAvailable(nsIRequest *request, nsISupports *ctxt, nsIInputStream *inStr, PRUint32 sourceOffset, PRUint32 count)
{
// right now, this really just means turn around and churn through the state machine
nsCOMPtr<nsIURI> uri = do_QueryInterface(ctxt);
return ProcessProtocolState(uri, inStr, sourceOffset, count);
}
NS_IMETHODIMP nsMsgProtocol::OnStartRequest(nsIRequest *request, nsISupports *ctxt)
{
nsresult rv = NS_OK;
nsCOMPtr <nsIMsgMailNewsUrl> aMsgUrl = do_QueryInterface(ctxt, &rv);
if (NS_SUCCEEDED(rv) && aMsgUrl)
{
rv = aMsgUrl->SetUrlState(PR_TRUE, NS_OK);
if (m_loadGroup)
m_loadGroup->AddRequest(NS_STATIC_CAST(nsIRequest *, this), nsnull /* context isupports */);
}
// if we are set up as a channel, we should notify our channel listener that we are starting...
// so pass in ourself as the channel and not the underlying socket or file channel the protocol
// happens to be using
if (!mSuppressListenerNotifications && m_channelListener)
{
if (!m_channelContext)
m_channelContext = do_QueryInterface(ctxt);
rv = m_channelListener->OnStartRequest(this, m_channelContext);
}
NS_ENSURE_SUCCESS(rv, rv);
return rv;
}
// stop binding is a "notification" informing us that the stream associated with aURL is going away.
NS_IMETHODIMP nsMsgProtocol::OnStopRequest(nsIRequest *request, nsISupports *ctxt, nsresult aStatus)
{
nsresult rv = NS_OK;
// if we are set up as a channel, we should notify our channel listener that we are starting...
// so pass in ourself as the channel and not the underlying socket or file channel the protocol
// happens to be using
if (!mSuppressListenerNotifications && m_channelListener)
rv = m_channelListener->OnStopRequest(this, m_channelContext, aStatus);
nsCOMPtr <nsIMsgMailNewsUrl> msgUrl = do_QueryInterface(ctxt, &rv);
if (NS_SUCCEEDED(rv) && msgUrl)
{
rv = msgUrl->SetUrlState(PR_FALSE, aStatus);
if (m_loadGroup)
m_loadGroup->RemoveRequest(NS_STATIC_CAST(nsIRequest *, this), nsnull, aStatus);
// !NS_BINDING_ABORTED because we don't want to see an alert if the user
// cancelled the operation. also, we'll get here because we call Cancel()
// to force removal of the nsSocketTransport. see CloseSocket()
// bugs #30775 and #30648 relate to this
if (NS_FAILED(aStatus) && (aStatus != NS_BINDING_ABORTED))
{
nsCOMPtr<nsIPrompt> msgPrompt;
GetPromptDialogFromUrl(msgUrl , getter_AddRefs(msgPrompt));
NS_ENSURE_TRUE(msgPrompt, NS_ERROR_FAILURE);
PRInt32 errorID;
switch (aStatus)
{
case NS_ERROR_UNKNOWN_HOST:
errorID = UNKNOWN_HOST_ERROR;
break;
case NS_ERROR_CONNECTION_REFUSED:
errorID = CONNECTION_REFUSED_ERROR;
break;
case NS_ERROR_NET_TIMEOUT:
errorID = NET_TIMEOUT_ERROR;
break;
default:
errorID = UNKNOWN_ERROR;
break;
}
NS_ASSERTION(errorID != UNKNOWN_ERROR, "unknown error, but don't alert user.");
if (errorID != UNKNOWN_ERROR) {
PRUnichar *errorMsg = GetStringByID(errorID);
if (errorMsg == nsnull) {
nsAutoString resultString(NS_LITERAL_STRING("[StringID "));
resultString.AppendInt(errorID, 10);
resultString.Append(NS_LITERAL_STRING("?]"));
errorMsg = ToNewUnicode(resultString);
}
rv = msgPrompt->Alert(nsnull, errorMsg);
nsMemory::Free(errorMsg);
}
} // if we got an error code
} // if we have a mailnews url.
return rv;
}
nsresult nsMsgProtocol::GetPromptDialogFromUrl(nsIMsgMailNewsUrl * aMsgUrl, nsIPrompt ** aPromptDialog)
{
// get the nsIPrompt interface from the message window associated wit this url.
nsCOMPtr<nsIMsgWindow> msgWindow;
aMsgUrl->GetMsgWindow(getter_AddRefs(msgWindow));
NS_ENSURE_TRUE(msgWindow, NS_ERROR_FAILURE);
msgWindow->GetPromptDialog(aPromptDialog);
NS_ENSURE_TRUE(*aPromptDialog, NS_ERROR_FAILURE);
return NS_OK;
}
nsresult nsMsgProtocol::LoadUrl(nsIURI * aURL, nsISupports * aConsumer)
{
// okay now kick us off to the next state...
// our first state is a process state so drive the state machine...
nsresult rv = NS_OK;
nsCOMPtr <nsIMsgMailNewsUrl> aMsgUrl = do_QueryInterface(aURL, &rv);
if (NS_SUCCEEDED(rv) && aMsgUrl)
{
PRBool msgIsInLocalCache;
aMsgUrl->GetMsgIsInLocalCache(&msgIsInLocalCache);
rv = aMsgUrl->SetUrlState(PR_TRUE, NS_OK); // set the url as a url currently being run...
// if the url is given a stream consumer then we should use it to forward calls to...
if (!m_channelListener && aConsumer) // if we don't have a registered listener already
{
m_channelListener = do_QueryInterface(aConsumer);
if (!m_channelContext)
m_channelContext = do_QueryInterface(aURL);
}
if (!m_socketIsOpen)
{
nsCOMPtr<nsISupports> urlSupports = do_QueryInterface(aURL);
if (m_transport)
{
// put us in a state where we are always notified of incoming data
rv = m_transport->AsyncRead(this, urlSupports, m_startPosition, m_readCount, 0, getter_AddRefs(m_request));
NS_ASSERTION(NS_SUCCEEDED(rv), "AsyncRead failed");
m_socketIsOpen = PR_TRUE; // mark the channel as open
}
} // if we got an event queue service
else if (!msgIsInLocalCache) // the connection is already open so we should begin processing our new url...
rv = ProcessProtocolState(aURL, nsnull, 0, 0);
}
return rv;
}
///////////////////////////////////////////////////////////////////////
// The rest of this file is mostly nsIChannel mumbo jumbo stuff
///////////////////////////////////////////////////////////////////////
nsresult nsMsgProtocol::SetUrl(nsIURI * aURL)
{
m_url = dont_QueryInterface(aURL);
return NS_OK;
}
NS_IMETHODIMP nsMsgProtocol::SetLoadGroup(nsILoadGroup * aLoadGroup)
{
m_loadGroup = dont_QueryInterface(aLoadGroup);
return NS_OK;
}
NS_IMETHODIMP nsMsgProtocol::GetOriginalURI(nsIURI* *aURI)
{
*aURI = m_originalUrl ? m_originalUrl : m_url;
NS_IF_ADDREF(*aURI);
return NS_OK;
}
NS_IMETHODIMP nsMsgProtocol::SetOriginalURI(nsIURI* aURI)
{
m_originalUrl = aURI;
return NS_OK;
}
NS_IMETHODIMP nsMsgProtocol::GetURI(nsIURI* *aURI)
{
*aURI = m_url;
NS_IF_ADDREF(*aURI);
return NS_OK;
}
NS_IMETHODIMP nsMsgProtocol::Open(nsIInputStream **_retval)
{
NS_NOTREACHED("Open");
return NS_ERROR_NOT_IMPLEMENTED;
}
NS_IMETHODIMP nsMsgProtocol::AsyncOpen(nsIStreamListener *listener, nsISupports *ctxt)
{
PRInt32 port;
nsresult rv = m_url->GetPort(&port);
if (NS_FAILED(rv))
return rv;
nsXPIDLCString scheme;
rv = m_url->GetScheme(getter_Copies(scheme));
if (NS_FAILED(rv))
return rv;
rv = NS_CheckPortSafety(port, scheme);
if (NS_FAILED(rv))
return rv;
// set the stream listener and then load the url
m_channelContext = ctxt;
m_channelListener = listener;
return LoadUrl(m_url, nsnull);
}
NS_IMETHODIMP nsMsgProtocol::GetLoadFlags(nsLoadFlags *aLoadFlags)
{
*aLoadFlags = mLoadFlags;
return NS_OK;
}
NS_IMETHODIMP nsMsgProtocol::SetLoadFlags(nsLoadFlags aLoadFlags)
{
mLoadFlags = aLoadFlags;
return NS_OK; // don't fail when trying to set this
}
NS_IMETHODIMP nsMsgProtocol::GetContentType(char * *aContentType)
{
// as url dispatching matures, we'll be intelligent and actually start
// opening the url before specifying the content type. This will allow
// us to optimize the case where the message url actual refers to
// a part in the message that has a content type that is not message/rfc822
if (m_ContentType.IsEmpty())
*aContentType = nsCRT::strdup("message/rfc822");
else
*aContentType = ToNewCString(m_ContentType);
return NS_OK;
}
NS_IMETHODIMP nsMsgProtocol::SetContentType(const char *aContentType)
{
m_ContentType = aContentType;
return NS_OK;
}
NS_IMETHODIMP nsMsgProtocol::GetContentLength(PRInt32 * aContentLength)
{
*aContentLength = -1;
return NS_OK;
}
NS_IMETHODIMP nsMsgProtocol::GetSecurityInfo(nsISupports * *aSecurityInfo)
{
*aSecurityInfo = nsnull;
return NS_ERROR_NOT_IMPLEMENTED;
}
NS_IMETHODIMP nsMsgProtocol::GetName(PRUnichar * *aName)
{
return NS_ERROR_NOT_IMPLEMENTED;
}
NS_IMETHODIMP
nsMsgProtocol::SetContentLength(PRInt32 aContentLength)
{
return NS_ERROR_NOT_IMPLEMENTED;
}
NS_IMETHODIMP nsMsgProtocol::GetOwner(nsISupports * *aPrincipal)
{
*aPrincipal = mOwner;
NS_IF_ADDREF(*aPrincipal);
return NS_OK;
}
NS_IMETHODIMP nsMsgProtocol::SetOwner(nsISupports * aPrincipal)
{
mOwner = aPrincipal;
return NS_OK;
}
NS_IMETHODIMP nsMsgProtocol::GetLoadGroup(nsILoadGroup * *aLoadGroup)
{
*aLoadGroup = m_loadGroup;
NS_IF_ADDREF(*aLoadGroup);
return NS_OK;
}
NS_IMETHODIMP
nsMsgProtocol::GetNotificationCallbacks(nsIInterfaceRequestor* *aNotificationCallbacks)
{
*aNotificationCallbacks = mCallbacks.get();
NS_IF_ADDREF(*aNotificationCallbacks);
return NS_OK;
}
NS_IMETHODIMP
nsMsgProtocol::SetNotificationCallbacks(nsIInterfaceRequestor* aNotificationCallbacks)
{
mCallbacks = aNotificationCallbacks;
// Verify that the event sink is http
if (mCallbacks)
{
nsCOMPtr<nsIProgressEventSink> progressSink;
(void)mCallbacks->GetInterface(NS_GET_IID(nsIProgressEventSink),
getter_AddRefs(progressSink));
// only replace our current progress event sink if we were given a new one..
if (progressSink) mProgressEventSink = progressSink;
}
return NS_OK;
}
////////////////////////////////////////////////////////////////////////////////
// From nsIRequest
////////////////////////////////////////////////////////////////////////////////
NS_IMETHODIMP nsMsgProtocol::IsPending(PRBool *result)
{
*result = PR_TRUE;
return NS_OK;
}
NS_IMETHODIMP nsMsgProtocol::GetStatus(nsresult *status)
{
if (m_request)
return m_request->GetStatus(status);
*status = NS_ERROR_FAILURE;
return *status;
}
NS_IMETHODIMP nsMsgProtocol::Cancel(nsresult status)
{
NS_ASSERTION(m_request,"no channel");
if (!m_request)
return NS_ERROR_FAILURE;
return m_request->Cancel(status);
}
NS_IMETHODIMP nsMsgProtocol::Suspend()
{
NS_NOTREACHED("Suspend");
return NS_ERROR_NOT_IMPLEMENTED;
}
NS_IMETHODIMP nsMsgProtocol::Resume()
{
NS_NOTREACHED("Resume");
return NS_ERROR_NOT_IMPLEMENTED;
}
nsresult nsMsgProtocol::PostMessage(nsIURI* url, nsIFileSpec *fileSpec)
{
if (!url || !fileSpec) return NS_ERROR_NULL_POINTER;
#define POST_DATA_BUFFER_SIZE 2048
// mscott -- this function should be re-written to use the file url code
// so it can be asynch
nsFileSpec afileSpec;
fileSpec->GetFileSpec(&afileSpec);
nsInputFileStream * fileStream = new nsInputFileStream(afileSpec,
PR_RDONLY, 00700);
if (fileStream && fileStream->is_open())
{
PRInt32 amtInBuffer = 0;
PRBool lastLineWasComplete = PR_TRUE;
PRBool quoteLines = PR_TRUE; // it is always true but I'd like to
// generalize this function and then it
// might not be
char buffer[POST_DATA_BUFFER_SIZE];
if (quoteLines /* || add_crlf_to_line_endings */)
{
char *line;
char * b = buffer;
PRInt32 bsize = POST_DATA_BUFFER_SIZE;
amtInBuffer = 0;
do {
lastLineWasComplete = PR_TRUE;
PRInt32 L = 0;
if (fileStream->eof())
{
line = nsnull;
break;
}
if (!fileStream->readline(b, bsize-5))
lastLineWasComplete = PR_FALSE;
line = b;
L = PL_strlen(line);
/* escape periods only if quote_lines_p is set
*/
if (quoteLines && lastLineWasComplete && line[0] == '.')
{
/* This line begins with "." so we need to quote it
by adding another "." to the beginning of the line.
*/
PRInt32 i;
line[L+1] = 0;
for (i = L; i > 0; i--)
line[i] = line[i-1];
L++;
}
if (!lastLineWasComplete || (L > 1 && line[L-2] == nsCRT::CR &&
line[L-1] == nsCRT::LF))
{
/* already ok */
}
else if(L > 0 /* && (line[L-1] == nsCRT::LF || line[L-1] == nsCRT::CR) */)
{
/* only add the crlf if required
* we still need to do all the
* if comparisons here to know
* if the line was complete
*/
if(/* add_crlf_to_line_endings */ PR_TRUE)
{
/* Change newline to CRLF. */
line[L++] = nsCRT::CR;
line[L++] = nsCRT::LF;
line[L] = 0;
}
}
else if (L == 0 && !fileStream->eof()
/* && add_crlf_to_line_endings */)
{
// jt ** empty line; output CRLF
line[L++] = nsCRT::CR;
line[L++] = nsCRT::LF;
line[L] = 0;
}
bsize -= L;
b += L;
amtInBuffer += L;
// test hack by mscott. If our buffer is almost full, then
// send it off & reset ourselves
// to make more room.
if (bsize < 100) // i chose 100 arbitrarily.
{
if (*buffer)
SendData(url, buffer);
buffer[0] = '\0';
b = buffer; // reset buffer
bsize = POST_DATA_BUFFER_SIZE;
}
} while (line /* && bsize > 100 */);
}
SendData(url, buffer);
delete fileStream;
}
return NS_OK;
}
/////////////////////////////////////////////////////////////////////
// nsMsgAsyncWriteProtocol subclass and related helper classes
/////////////////////////////////////////////////////////////////////
class nsMsgProtocolStreamProvider : public nsIStreamProvider
{
public:
NS_DECL_ISUPPORTS
nsMsgProtocolStreamProvider() { NS_INIT_REFCNT(); }
virtual ~nsMsgProtocolStreamProvider() {}
void Init(nsMsgAsyncWriteProtocol *aProtInstance, nsIInputStream *aInputStream) { mMsgProtocol = aProtInstance; mInStream = aInputStream;}
//
// nsIRequestObserver implementation ...
//
NS_IMETHODIMP OnStartRequest(nsIRequest *chan, nsISupports *ctxt) { return NS_OK; }
NS_IMETHODIMP OnStopRequest(nsIRequest *chan, nsISupports *ctxt, nsresult status) { return NS_OK; }
//
// nsIStreamProvider implementation ...
//
NS_IMETHODIMP OnDataWritable(nsIRequest *aChannel, nsISupports *aContext,
nsIOutputStream *aOutStream,
PRUint32 aOffset, PRUint32 aCount)
{
NS_ASSERTION(mInStream, "not initialized");
nsresult rv;
PRUint32 avail;
// Write whatever is available in the pipe. If the pipe is empty, then
// return NS_BASE_STREAM_WOULD_BLOCK; we will resume the write when there
// is more data.
rv = mInStream->Available(&avail);
if (NS_FAILED(rv)) return rv;
if (avail == 0)
{
mMsgProtocol->mSuspendedWrite = PR_TRUE;
return NS_BASE_STREAM_WOULD_BLOCK;
}
PRUint32 bytesWritten;
rv = aOutStream->WriteFrom(mInStream, PR_MIN(avail, aCount), &bytesWritten);
// if were full at the time, the input stream may be backed up and we need to read any remains from the last ODA call
// before we'll get more ODA calls
if (mMsgProtocol->mSuspendedRead)
mMsgProtocol->UnblockPostReader();
mMsgProtocol->UpdateProgress(bytesWritten);
return rv;
}
protected:
nsMsgAsyncWriteProtocol * mMsgProtocol;
nsCOMPtr<nsIInputStream> mInStream;
};
NS_IMPL_THREADSAFE_ISUPPORTS2(nsMsgProtocolStreamProvider,
nsIStreamProvider,
nsIRequestObserver)
class nsMsgFilePostHelper : public nsIStreamListener
{
public:
NS_DECL_ISUPPORTS
NS_DECL_NSIREQUESTOBSERVER
NS_DECL_NSISTREAMLISTENER
nsMsgFilePostHelper() { NS_INIT_REFCNT(); mSuspendedPostFileRead = PR_FALSE;}
nsresult Init(nsIOutputStream * aOutStream, nsMsgAsyncWriteProtocol * aProtInstance, nsIFile *aFileToPost);
virtual ~nsMsgFilePostHelper() {}
nsCOMPtr<nsIRequest> mPostFileRequest;
PRBool mSuspendedPostFileRead;
void CloseSocket() { mProtInstance = nsnull; }
protected:
nsCOMPtr<nsIOutputStream> mOutStream;
nsMsgAsyncWriteProtocol * mProtInstance;
};
NS_IMPL_THREADSAFE_ADDREF(nsMsgFilePostHelper)
NS_IMPL_THREADSAFE_RELEASE(nsMsgFilePostHelper)
NS_INTERFACE_MAP_BEGIN(nsMsgFilePostHelper)
NS_INTERFACE_MAP_ENTRY(nsIStreamListener)
NS_INTERFACE_MAP_ENTRY(nsIRequestObserver)
NS_INTERFACE_MAP_END_THREADSAFE
nsresult nsMsgFilePostHelper::Init(nsIOutputStream * aOutStream, nsMsgAsyncWriteProtocol * aProtInstance, nsIFile *aFileToPost)
{
nsresult rv = NS_OK;
mOutStream = aOutStream;
mProtInstance = aProtInstance; // mscott work out ref counting issue
nsCOMPtr<nsIFileTransportService> fts =
do_GetService(kFileTransportServiceCID, &rv);
if (NS_FAILED(rv)) return rv;
nsCOMPtr<nsITransport> transport;
rv = fts->CreateTransport(aFileToPost, PR_RDONLY, 0664, getter_AddRefs(transport));
if (transport)
{
rv = transport->AsyncRead(this, nsnull, 0, -1, 0, getter_AddRefs(mPostFileRequest));
}
return rv;
}
NS_IMETHODIMP nsMsgFilePostHelper::OnStartRequest(nsIRequest * aChannel, nsISupports *ctxt)
{
return NS_OK;
}
NS_IMETHODIMP nsMsgFilePostHelper::OnStopRequest(nsIRequest * aChannel, nsISupports *ctxt, nsresult aStatus)
{
if (!mProtInstance) return NS_OK;
if (!mSuspendedPostFileRead)
mProtInstance->PostDataFinished();
mSuspendedPostFileRead = PR_FALSE;
mProtInstance->mFilePostHelper = nsnull;
return NS_OK;
}
NS_IMETHODIMP nsMsgFilePostHelper::OnDataAvailable(nsIRequest * /* aChannel */, nsISupports *ctxt, nsIInputStream *inStr, PRUint32 sourceOffset, PRUint32 count)
{
if (!mProtInstance) return NS_OK;
if (mSuspendedPostFileRead)
{
mProtInstance->UpdateSuspendedReadBytes(count, mProtInstance->mInsertPeriodRequired);
return NS_OK;
}
mProtInstance->ProcessIncomingPostData(inStr, count);
if (mProtInstance->mSuspendedWrite)
{
// if we got here then we had suspended the write 'cause we didn't have anymore
// data to write (i.e. the pipe went empty). So resume the channel to kick
// things off again.
mProtInstance->mSuspendedWrite = PR_FALSE;
mProtInstance->m_WriteRequest->Resume();
}
return NS_OK;
}
NS_IMPL_ADDREF_INHERITED(nsMsgAsyncWriteProtocol, nsMsgProtocol)
NS_IMPL_RELEASE_INHERITED(nsMsgAsyncWriteProtocol, nsMsgProtocol)
NS_INTERFACE_MAP_BEGIN(nsMsgAsyncWriteProtocol)
NS_INTERFACE_MAP_END_INHERITING(nsMsgProtocol)
nsMsgAsyncWriteProtocol::nsMsgAsyncWriteProtocol(nsIURI * aURL) : nsMsgProtocol(aURL)
{
mSuspendedWrite = PR_FALSE;
mSuspendedReadBytes = 0;
mSuspendedRead = PR_FALSE;
mInsertPeriodRequired = PR_FALSE;
mGenerateProgressNotifications = PR_FALSE;
mSuspendedReadBytesPostPeriod = 0;
mFilePostHelper = nsnull;
}
nsMsgAsyncWriteProtocol::~nsMsgAsyncWriteProtocol()
{}
NS_IMETHODIMP nsMsgAsyncWriteProtocol::Cancel(nsresult status)
{
if (m_request)
m_request->Cancel(status);
if (m_WriteRequest)
m_WriteRequest->Cancel(status);
return NS_OK;
}
nsresult nsMsgAsyncWriteProtocol::PostMessage(nsIURI* url, nsIFileSpec *fileSpec)
{
// convert the file spec into a nsIFile....
nsFileSpec spec;
fileSpec->GetFileSpec(&spec);
nsCOMPtr<nsILocalFile> file;
NS_FileSpecToIFile(&spec, getter_AddRefs(file));
nsCOMPtr<nsIStreamListener> listener;
NS_NEWXPCOM(listener, nsMsgFilePostHelper);
if (!listener) return NS_ERROR_OUT_OF_MEMORY;
// be sure to initialize some state before posting
mSuspendedReadBytes = 0;
mNumBytesPosted = 0;
fileSpec->GetFileSize(&mFilePostSize);
mSuspendedRead = PR_FALSE;
mInsertPeriodRequired = PR_FALSE;
mSuspendedReadBytesPostPeriod = 0;
mGenerateProgressNotifications = PR_TRUE;
mFilePostHelper = NS_STATIC_CAST(nsMsgFilePostHelper*,NS_STATIC_CAST(nsIStreamListener*, listener));
NS_STATIC_CAST(nsMsgFilePostHelper*,NS_STATIC_CAST(nsIStreamListener*, listener))->Init(m_outputStream, this, file);
return NS_OK;
}
nsresult nsMsgAsyncWriteProtocol::SuspendPostFileRead()
{
#ifdef DEBUG_mscott
printf("suspending post read during send\n");
#endif
if (mFilePostHelper && !mFilePostHelper->mSuspendedPostFileRead)
{
// uhoh we need to pause reading in the file until we get unblocked...
mFilePostHelper->mPostFileRequest->Suspend();
mFilePostHelper->mSuspendedPostFileRead = PR_TRUE;
}
return NS_OK;
}
nsresult nsMsgAsyncWriteProtocol::ResumePostFileRead()
{
#ifdef DEBUG_mscott
printf("resuming post read during send\n");
#endif
if (mFilePostHelper)
{
if (mFilePostHelper->mSuspendedPostFileRead)
{
mFilePostHelper->mPostFileRequest->Resume();
mFilePostHelper->mSuspendedPostFileRead = PR_FALSE;
}
}
else // we must be done with the download so send the '.'
{
PostDataFinished();
}
return NS_OK;
}
nsresult nsMsgAsyncWriteProtocol::UpdateSuspendedReadBytes(PRUint32 aNewBytes, PRBool aAddToPostPeriodByteCount)
{
// depending on our current state, we'll either add aNewBytes to mSuspendedReadBytes
// or mSuspendedReadBytesAfterPeriod.
mSuspendedRead = PR_TRUE;
if (aAddToPostPeriodByteCount)
mSuspendedReadBytesPostPeriod += aNewBytes;
else
mSuspendedReadBytes += aNewBytes;
return NS_OK;
}
nsresult nsMsgAsyncWriteProtocol::PostDataFinished()
{
SendData(nsnull, CRLF "." CRLF);
mGenerateProgressNotifications = PR_FALSE;
mPostDataStream = nsnull;
return NS_OK;
}
nsresult nsMsgAsyncWriteProtocol::ProcessIncomingPostData(nsIInputStream *inStr, PRUint32 count)
{
if (!m_socketIsOpen) return NS_OK; // kick out if the socket was canceled
// We need to quote any '.' that occur at the beginning of a line.
// but I don't want to waste time reading out the data into a buffer and searching
// let's try to leverage nsIBufferedInputStream and see if we can "peek" into the
// current contents for this particular case.
nsCOMPtr<nsISearchableInputStream> bufferInputStr = do_QueryInterface(inStr);
NS_ASSERTION(bufferInputStr, "i made a wrong assumption about the type of stream we are getting");
NS_ASSERTION(mSuspendedReadBytes == 0, "oops, I missed something");
if (!mPostDataStream) mPostDataStream = inStr;
if (bufferInputStr)
{
PRUint32 amountWritten;
while (count > 0)
{
PRBool found = PR_FALSE;
PRUint32 offset = 0;
bufferInputStr->Search("\012.", PR_TRUE, &found, &offset); // LF.
if (!found || offset > count)
{
// push this data into the output stream
m_outputStream->WriteFrom(inStr, count, &amountWritten);
// store any remains which need read out at a later date
if (count > amountWritten) // stream will block
{
UpdateSuspendedReadBytes(count - amountWritten, PR_FALSE);
SuspendPostFileRead();
}
break;
}
else
{
// count points to the LF in a LF followed by a '.'
// go ahead and write up to offset..
m_outputStream->WriteFrom(inStr, offset + 1, &amountWritten);
count -= amountWritten;
if (offset+1 > amountWritten)
{
UpdateSuspendedReadBytes(offset+1 - amountWritten, PR_FALSE);
mInsertPeriodRequired = PR_TRUE;
UpdateSuspendedReadBytes(count, mInsertPeriodRequired);
SuspendPostFileRead();
break;
}
// write out the extra '.'
m_outputStream->Write(".", 1, &amountWritten);
if (amountWritten != 1)
{
mInsertPeriodRequired = PR_TRUE;
// once we do write out the '.', if we are now blocked we need to remember the remaining count that comes
// after the '.' so we can perform processing on that once we become unblocked.
UpdateSuspendedReadBytes(count, mInsertPeriodRequired);
SuspendPostFileRead();
break;
}
}
} // while count > 0
}
return NS_OK;
}
nsresult nsMsgAsyncWriteProtocol::UnblockPostReader()
{
PRUint32 amountWritten = 0;
if (!m_socketIsOpen) return NS_OK; // kick out if the socket was canceled
if (mSuspendedRead)
{
// (1) attempt to write out any remaining read bytes we need in order to unblock the reader
if (mSuspendedReadBytes > 0 && mPostDataStream)
{
PRUint32 avail = 0;
mPostDataStream->Available(&avail);
m_outputStream->WriteFrom(mPostDataStream, PR_MIN(avail, mSuspendedReadBytes), &amountWritten);
// hmm sometimes my mSuspendedReadBytes is getting out of whack...so for now, reset it
// if necessary.
if (mSuspendedReadBytes > avail)
mSuspendedReadBytes = avail;
if (mSuspendedReadBytes > amountWritten)
mSuspendedReadBytes -= amountWritten;
else
mSuspendedReadBytes = 0;
}
// (2) if we are now unblocked, and we need to insert a '.' then do so now...
if (mInsertPeriodRequired && mSuspendedReadBytes == 0)
{
amountWritten = 0;
m_outputStream->Write(".", 1, &amountWritten);
if (amountWritten == 1) // if we succeeded then clear pending '.' flag
mInsertPeriodRequired = PR_FALSE;
}
// (3) if we inserted a '.' and we still have bytes after the '.' which need processed before the stream is unblocked
// then fake an ODA call to handle this now...
if (!mInsertPeriodRequired && mSuspendedReadBytesPostPeriod > 0)
{
// these bytes actually need processed for extra '.''s.....
PRUint32 postbytes = mSuspendedReadBytesPostPeriod;
mSuspendedReadBytesPostPeriod = 0;
ProcessIncomingPostData(mPostDataStream, postbytes);
}
// (4) determine if we are out of the suspended read state...
if (mSuspendedReadBytes == 0 && !mInsertPeriodRequired && mSuspendedReadBytesPostPeriod == 0)
{
mSuspendedRead = PR_FALSE;
ResumePostFileRead();
}
} // if we are in the suspended read state
return NS_OK;
}
nsresult nsMsgAsyncWriteProtocol::SetupTransportState()
{
nsresult rv = NS_OK;
if (!m_outputStream && m_transport)
{
// first create a pipe which we'll use to write the data we want to send
// into.
rv = NS_NewPipe(getter_AddRefs(mInStream), getter_AddRefs(m_outputStream),
1024, // segmentSize
1024*8, // maxSize
PR_TRUE,
PR_TRUE);
nsCOMPtr<nsIStreamProvider> provider;
NS_NEWXPCOM(provider, nsMsgProtocolStreamProvider);
if (!provider) return NS_ERROR_OUT_OF_MEMORY;
NS_STATIC_CAST(nsMsgProtocolStreamProvider*,
NS_STATIC_CAST(nsIStreamProvider*, provider))->Init(this, mInStream);
rv = m_transport->AsyncWrite(provider, nsnull, 0, 0, 0, getter_AddRefs(m_WriteRequest));
if (NS_FAILED(rv)) return rv;
} // if m_transport
return rv;
}
nsresult nsMsgAsyncWriteProtocol::CloseSocket()
{
nsresult rv = NS_OK;
nsMsgProtocol::CloseSocket();
// we need to call Cancel so that we remove the socket transport from the mActiveTransportList. see bug #30648
if (m_WriteRequest)
rv = m_WriteRequest->Cancel(NS_BINDING_ABORTED);
if (mFilePostHelper)
{
mFilePostHelper->CloseSocket();
mFilePostHelper = nsnull;
}
m_WriteRequest = 0;
return rv;
}
void nsMsgAsyncWriteProtocol::UpdateProgress(PRUint32 aNewBytes)
{
if (!mGenerateProgressNotifications) return;
mNumBytesPosted += aNewBytes;
if (mFilePostSize > 0)
{
nsCOMPtr <nsIMsgMailNewsUrl> mailUrl = do_QueryInterface(m_url);
if (!mailUrl) return;
nsCOMPtr<nsIMsgStatusFeedback> statusFeedback;
mailUrl->GetStatusFeedback(getter_AddRefs(statusFeedback));
if (!statusFeedback) return;
nsCOMPtr<nsIWebProgressListener> webProgressListener (do_QueryInterface(statusFeedback));
if (!webProgressListener) return;
webProgressListener->OnProgressChange(nsnull, m_WriteRequest, mNumBytesPosted, mFilePostSize, mNumBytesPosted, mFilePostSize);
}
return;
}
PRInt32 nsMsgAsyncWriteProtocol::SendData(nsIURI * aURL, const char * dataBuffer, PRBool aSuppressLogging)
{
PRUint32 len = nsCRT::strlen(dataBuffer);
PRUint32 cnt;
nsresult rv = m_outputStream->Write(dataBuffer, len, &cnt);
if (NS_SUCCEEDED(rv) && len==cnt)
{
if (mSuspendedWrite)
{
// if we got here then we had suspended the write 'cause we didn't have anymore
// data to write (i.e. the pipe went empty). So resume the channel to kick
// things off again.
mSuspendedWrite = PR_FALSE;
m_WriteRequest->Resume();
}
return NS_OK;
}
else
return NS_ERROR_FAILURE;
}
#define MSGS_URL "chrome://messenger/locale/messenger.properties"
PRUnichar *GetStringByID(PRInt32 stringID)
{
nsresult rv;
nsCOMPtr <nsIStringBundle> sBundle = nsnull;
nsCOMPtr<nsIStringBundleService> sBundleService =
do_GetService(kStringBundleServiceCID, &rv);
if (NS_FAILED(rv) || (nsnull == sBundleService))
return nsnull;
rv = sBundleService->CreateBundle(MSGS_URL, getter_AddRefs(sBundle));
if (NS_FAILED(rv))
return nsnull;
PRUnichar *ptrv = nsnull;
rv = sBundle->GetStringFromID(stringID, &ptrv);
if (NS_FAILED(rv))
return nsnull;
return (ptrv);
}
Reference in New Issue View Git Blame Copy Permalink