Magic-Mirror/gecko-dev
1
0
Fork 0
mirror of https://github.com/mozilla/gecko-dev.git synced 2024-11-01 22:55:23 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
5bd6af574f
gecko-dev/mstone/bin/report.pl
dac%x.cx 3aa64bafea Add PNG support for gnuplot
2000-04-27 21:36:40 +00:00

606 lines
18 KiB
Perl
Raw Blame History

# The contents of this file are subject to the Netscape Public
# License Version 1.1 (the "License"); you may not use this file
# except in compliance with the License. You may obtain a copy of
# the License at http://www.mozilla.org/NPL/
#
# Software distributed under the License is distributed on an "AS
# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
# implied. See the License for the specific language governing
# rights and limitations under the License.
#
# The Original Code is the Netscape Mailstone utility,
# released March 17, 2000.
#
# The Initial Developer of the Original Code is Netscape
# Communications Corporation. Portions created by Netscape are
# Copyright (C) 1997-2000 Netscape Communications Corporation. All
# Rights Reserved.
#
# Contributor(s): Dan Christian <robodan@netscape.com>
# Marcel DePaolis <marcel@netcape.com>
#
# Alternatively, the contents of this file may be used under the
# terms of the GNU Public License (the "GPL"), in which case the
# provisions of the GPL are applicable instead of those above.
# If you wish to allow use of your version of this file only
# under the terms of the GPL and not to allow others to use your
# version of this file under the NPL, indicate your decision by
# deleting the provisions above and replace them with the notice
# and other provisions required by the GPL. If you do not delete
# the provisions above, a recipient may use your version of this
# file under either the NPL or the GPL.
#####################################################
# This file deals with the summary data only
# Should be packages
do 'genplot.pl' || die "$@\n";
sub walkSetupTotals {
my $a = shift; my $f = shift; my $p = shift;
if ($p =~ /(\w+):(\w+):$/) {
my $tm = $2;
if (!($finals{Total}->{$tm}->{$f})) {
$finals{Total}->{$tm}->{$f} = $a;
} elsif ($f =~ /Min$/) {
$finals{Total}->{$tm}->{$f} = $a
if (($a > 0.0) && ($a < $finals{Total}->{$tm}->{$f}));
} elsif ($f =~ /Max$/) {
$finals{Total}->{$tm}->{$f} = $a if ($a > $finals{Total}->{$tm}->{$f});
} else {
$finals{Total}->{$tm}->{$f} += $a;}
}
elsif ($p =~ /(\w+):$/) {
$finals{Total}->{$f} += $a;
}
}
sub setupTotals {
# Figure out combined timers for "Total" protocol
# We might do a smarter merge here (look at context and try to match order)
# As long as the first protocol is a superset, it wont matter
my @tnames;
foreach $proto (@protocols) {
foreach $n (@{$protocolFields{$proto}}) {
my $t = $n;
$t =~ s/([][{}*+?^.\/])/\\$1/g; # quote regex syntax
my $found = 0;
foreach $tn (@tnames) { # see if it is in the list already
next unless ($tn =~ /$t/);
$found = 1;
last;
}
#print "proto $proto: Found $n\n" if ($found > 0);
next if ($found > 0);
#print "proto $proto: Add $n\n";
push @tnames, $n; # add to list
}
}
#print "'Total' timers @tnames\n";
$protocolFields{"Total"} = \@tnames;
# Create "Total" hashes
$finals{Total} = ArrayInstance->new();
foreach $n (@{$protocolFields{"Total"}}) { # all timers
my $t = $n; # dont modify original list
if ($t =~ /^\[(\w+)\]$/) { # Timer case, strip off brackets
$finals{Total}->{$1} = ArrayInstance->new();
#print "Creating Total timer field $1\n";
} else { # scalar
$finals{Total}->{$n} = 0;
#print "Creating Total scalar field $n\n";
}
}
# Total finals array
foreach $proto (@protocols) {
foreach $t (@{$protocolFields{$proto}}) {
if ($t =~ /^\[(\w+)\]$/) { # Timer case, strip off brackets
my $tm = $1;
foreach $f (@timerFieldsAll) {
my $a = $finals{$proto}->{$tm}->{$f};
if (!($finals{Total}->{$tm}->{$f})) { # never touched
$finals{Total}->{$tm}->{$f} = $a;
} elsif ($f =~ /Min$/) {
$finals{Total}->{$tm}->{$f} = $a
if (($a > 0.0)
&& ($a < $finals{Total}->{$tm}->{$f}));
} elsif ($f =~ /Max$/) {
$finals{Total}->{$tm}->{$f} = $a
if ($a > $finals{Total}->{$tm}->{$f});
} else {
$finals{Total}->{$tm}->{$f} += $a;
}
}
} else {
$finals{Total}->{$t} += $finals{$proto}->{$t};
}
}
}
# Convert Time2 to standard deviation
foreach $proto (@protocolsAll) {
foreach $n (@{$protocolFields{$proto}}) {
my $t = $n; # dont modify original list
if ($t =~ /^\[(\w+)\]$/) { $t = $1; } # strip off brackets
next unless ($finals{$proto}->{$t}); # proto doesnt have timer
next unless ($finals{$proto}->{$t}->{Try});
next unless ($finals{$proto}->{$t}->{Time2} > 0);
my $ss = $finals{$proto}->{$t}->{Time2};
my $tot = $finals{$proto}->{$t}->{Time};
my $n = $finals{$proto}->{$t}->{Try};
next unless ($n > 0); # skip if this is 0
my $var = ($ss - (($tot * $tot) / $n)) / $n;
print "$proto->$t var < 0: Time2=$ss Time=$tot n=$n\n"
if ($var < 0);
$finals{$proto}->{$t}->{Time2} = ($var > 0) ? sqrt ($var) : 0.0;
}
}
# Divide total times by trys to get averate time
foreach $proto (@protocolsAll) {
foreach $n (@{$protocolFields{$proto}}) {
my $t = $n; # dont modify original list
if ($t =~ /^\[(\w+)\]$/) { $t = $1; } # strip off brackets
next unless ($finals{$proto}->{$t}); # proto doesnt have timer
($finals{$proto}->{$t}->{Try}) || next;
$finals{$proto}->{$t}->{Time} /= $finals{$proto}->{$t}->{Try}
}
}
}
# The text version is designed to be machine processable
# commify and kformat are not used
sub genTextReport {
fileBackup ($resultstxt); # if processing as we go, backup old file
# Open a text file to hold the results
open(RESULTSTXT, ">$resultstxt") ||
die "Couldn't open $resultstxt: $!";
# Store results as text
printf RESULTSTXT "---- Netscape MailStone Results $params{TSTAMP} ----\n";
printf RESULTSTXT "\t\t%s\n", $params{TITLE};
printf RESULTSTXT "\t\t%s\n", $params{COMMENTS};
printf RESULTSTXT "\n";
printf RESULTSTXT "Test duration: %d %s. Rampup: %d %s. Reported duration %s seconds\n",
figureTimeNumber ($params{TIME}),
figureTimeUnits ($params{TIME}, "minutes"),
figureTimeNumber ($params{RAMPTIME}),
figureTimeUnits ($params{RAMPTIME}, "seconds"), $realTestSecs;
printf RESULTSTXT "Number of reporting clients: %s of %s\n",
$reportingClients, $totalProcs;
foreach $proto (@protocolsAll) {
# do op counters
printf RESULTSTXT "\n%-15s ", $proto;
foreach $f (@timerFieldsAll) {
#($f =~ m/^Time2$/o) && next;
printf RESULTSTXT "%13s",
($fieldNames{$f}) ? $fieldNames{$f} : $f;
}
foreach $n (@{$protocolFields{$proto}}) {
my $t = $n; # dont modify original list
unless ($t =~ /^\[(\w+)\]$/) { # scalar case
#next; # skip scalars for now
# do scalar counters. Column should line up with "Try"
printf RESULTSTXT "\n%-15s ",
$proto . ":" . (($timerNames{$t}) ? $timerNames{$t} : $t);
printf RESULTSTXT
"%13s", $finals{$proto}->{$t};
next;
} else { # strip off brackets
$t = $1;
}
printf RESULTSTXT "\n%-15s ",
$proto . ":" . (($timerNames{$t}) ? $timerNames{$t} : $t);
foreach $f (@timerFieldsAll) {
#($f =~ m/^Time2$/o) && next;
if ($f =~ m/Time/o) {
printf RESULTSTXT
"%13.3f", $finals{$proto}->{$t}->{$f};
} elsif ($f =~ m/Bytes/o) {
printf RESULTSTXT
"%13d", $finals{$proto}->{$t}->{$f};
} else {
printf RESULTSTXT
"%13s", $finals{$proto}->{$t}->{$f};
}
}
}
# do ops/sec
printf RESULTSTXT "\n\n%-15s ", $proto;
foreach $f (@timerFieldsAll) {
($f =~ m/^Time/o) && next;
printf RESULTSTXT "%9s/sec",
($fieldNames{$f}) ? $fieldNames{$f} : $f;
}
foreach $n (@{$protocolFields{$proto}}) {
my $t = $n; # dont modify original list
unless ($t =~ /^\[(\w+)\]$/) { # scalar case
#next; # skip scalars for now
# do scalar counter/sec. Column should line up with "Try"
printf RESULTSTXT "\n%-15s ",
$proto . ":" . (($timerNames{$t}) ? $timerNames{$t} : $t) . "/s";
printf RESULTSTXT
"%13.3f", $finals{$proto}->{$t} / $realTestSecs;
next;
} else {
$t = $1;
}
printf RESULTSTXT "\n%-15s ",
$proto . ":" . (($timerNames{$t}) ? $timerNames{$t} : $t) . "/s";
foreach $f (@timerFieldsAll) {
($f =~ m/^Time/o) && next;
if ($f =~ m/Bytes/o) {
printf RESULTSTXT
"%13d",
$finals{$proto}->{$t}->{$f} / $realTestSecs;
} else {
printf RESULTSTXT
"%13.3f",
$finals{$proto}->{$t}->{$f} / $realTestSecs;
}
}
}
printf RESULTSTXT "\n\n";
}
if ($params{SYSCONFIG}) {
print RESULTSTXT "\nSytem config details\n";
if (($params{SYSCONFIG} =~ m/^\S+$/o)
&& (open(SCFILE, "<$params{SYSCONFIG}"))) {
while (<SCFILE>) {
(m/^<\S+>\s*$/o) && next; # skip HTML only on them
s/<\S+>//g; # trim out obvious HTML commands
s/<!--.*-->//g; # trim out HTML comments
print RESULTSTXT $_;
}
close(SCFILE);
} else {
my $l = $params{SYSCONFIG}; # filter similar to above
$l =~ s/<\S+>//g; # trim out obvious HTML commands
$l =~ s/<!--.*-->//g; # trim out HTML comments
$l =~ s/\\\n/\n/g; # turn quoted newline to plain newline
print RESULTSTXT $l;
}
}
close(RESULTSTXT);
}
# Write the main part of the HTML page
sub genHTMLReportStart {
fileBackup ($resultshtml); # if processing as we go, backup old file
# Open an html file to hold the results
open(RESULTSHTML, ">$resultshtml") ||
die "Couldn't open $resultshtml: $!";
print RESULTSHTML <<END;
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2//EN">
<HTML>
<A NAME=TitleSection>
<TITLE>
Netscape MailStone Results $params{TSTAMP}
</TITLE>
</A>
<HEAD>
</HEAD>
<BODY TEXT="#000000" BGCOLOR="#FFFFFF" LINK="#0000FF" VLINK="#FF0000" ALINK="#000088">
<CENTER>
<HR NOSHADE WIDTH="100%">
<H1>Netscape MailStone Results $params{TSTAMP}</H1>
<H2>$params{TITLE}</H2>
<I>$params{COMMENTS}</I>
<HR WIDTH="100%">
</CENTER>
END
printf RESULTSHTML "<BR><B>Test duration:</B> %d %s. ",
figureTimeNumber ($params{TIME}),
figureTimeUnits ($params{TIME}, "minutes");
printf RESULTSHTML "<B>Rampup:</B> %d %s. ",
figureTimeNumber ($params{RAMPTIME}),
figureTimeUnits ($params{RAMPTIME}, "seconds");
printf RESULTSHTML "<B>Reported duration:</B> %s seconds\n",
commify ($realTestSecs);
printf RESULTSHTML "<BR><B>Reporting clients:</B> %s of %s\n",
commify ($reportingClients), commify ($totalProcs);
print RESULTSHTML <<END;
<BR>
Test <A HREF="all.wld">complete workload</a> description.
Filtered <A HREF="work.wld">workload</a> description.
<BR>
Plain <A HREF="results.txt">text version</a> of results.
Log of <A HREF="stderr">stderr</a> and debugging output.
<BR>
<A NAME=MonitoringSection></A>
END
{ # list user requested logging
my @logfiles = <$resultdir/*-pre.log>;
if (@logfiles) {
foreach $f (@logfiles) {
$f =~ s/$resultdir\///o; # strip directory out
$f =~ s/-pre\.log$//o; # strip extension off
print RESULTSHTML "Pre test log: <A HREF=\"$f-pre.log\">$f</a><BR>\n";
}
}
@logfiles = <$resultdir/*-run.log>;
if (@logfiles) {
foreach $f (@logfiles) {
$f =~ s/$resultdir\///o; # strip directory out
$f =~ s/-run\.log$//o; # strip extension off
print RESULTSHTML "Monitoring log: <A HREF=\"$f-run.log\">$f</a><BR>\n";
}
}
@logfiles = <$resultdir/*-post.log>;
if (@logfiles) {
foreach $f (@logfiles) {
$f =~ s/$resultdir\///o; # strip directory out
$f =~ s/-post\.log$//o; # strip extension off
print RESULTSHTML "Post test log: <A HREF=\"$f-post.log\">$f</a><BR>\n";
}
}
}
#print RESULTSHTML
#"<CENTER><H2>Results per protocol</H2></CENTER>\n";
foreach $proto (@protocolsAll) {
printf RESULTSHTML "<A NAME=%sTable></A>\n", $proto;
printf RESULTSHTML
"<TABLE BORDER=2 CELLSPACING=2 CELLPADDING=2 COLS=%d WIDTH=\"95%%\">",
2+$#{@{$protocolFields{$proto}}};
print RESULTSHTML
"<CAPTION>$proto Counters</CAPTION>\n";
# do op counters
print RESULTSHTML
"<TR><TH>$proto</TH>\n";
foreach $f (@timerFieldsAll) {
#($f =~ m/^Time2$/o) && next;
printf RESULTSHTML "<TH>%s</TH> ",
($fieldNames{$f}) ? $fieldNames{$f} : $f;
}
print RESULTSHTML
"</TR>\n";
foreach $n (@{$protocolFields{$proto}}) {
my $t = $n; # dont modify original list
unless ($t =~ /^\[(\w+)\]$/) { # scalar case
next; # skip scalars for now
# do scalar counters. Column should line up with "Try"
printf RESULTSHTML "<TR ALIGN=RIGHT><TH>%s</TH>\n",
($timerNames{$t}) ? $timerNames{$t} : $t;
printf RESULTSHTML
"<TD>%s</TD> ",
commify ($finals{$proto}->{$t});
next;
} else {
$t = $1;
}
printf RESULTSHTML "<TR ALIGN=RIGHT><TH>%s</TH>\n",
($timerNames{$t}) ? $timerNames{$t} : $t;
foreach $f (@timerFieldsAll) {
#($f =~ m/^Time2$/o) && next;
if ($f =~ m/Time/o) {
printf RESULTSHTML
"<TD>%s</TD> ",
tformat ($finals{$proto}->{$t}->{$f});
} elsif ($f =~ m/Bytes/o) {
printf RESULTSHTML
"<TD>%s</TD> ",
kformat ($finals{$proto}->{$t}->{$f});
} else {
printf RESULTSHTML
"<TD>%s</TD> ",
commify ($finals{$proto}->{$t}->{$f});
}
}
print RESULTSHTML "</TR>\n";
}
# do ops/sec
print RESULTSHTML
"<TR><TH>$proto</TH>\n";
foreach $f (@timerFieldsAll) {
($f =~ m/^Time/o) && next;
printf RESULTSHTML "<TH>%s/sec</TH> ",
($fieldNames{$f}) ? $fieldNames{$f} : $f;
}
print RESULTSHTML
"</TR>\n";
foreach $n (@{$protocolFields{$proto}}) {
my $t = $n; # dont modify original list
unless ($t =~ /^\[(\w+)\]$/) { # scalar case
next; # skip scalars for now
# do scalar counters. Column should line up with "Try"
printf RESULTSHTML "<TR ALIGN=RIGHT><TH>%s</TH>\n",
($timerNames{$t}) ? $timerNames{$t} : $t;
printf RESULTSHTML
"<TD>%.3f</TD> ",
$finals{$proto}->{$t} / $realTestSecs;
next;
} else {
$t = $1;
}
printf RESULTSHTML "<TR ALIGN=RIGHT><TH>%s</TH>\n",
($timerNames{$t}) ? $timerNames{$t} : $t;
foreach $f (@timerFieldsAll) {
($f =~ m/^Time/o) && next;
if ($f =~ m/Bytes/o) {
printf RESULTSHTML
"<TD>%s</TD> ",
kformat ($finals{$proto}->{$t}->{$f} / $realTestSecs);
} else {
printf RESULTSHTML
"<TD>%.3f</TD> ",
$finals{$proto}->{$t}->{$f} / $realTestSecs;
}
}
print RESULTSHTML "</TR>\n";
}
printf RESULTSHTML "</TABLE> <BR>\n\n";
}
print RESULTSHTML <<END;
<BR>
<CENTER>
<A NAME=GraphSection></A>
END
}
%genplotGraphs = ();
# Call genplot; and, if a graph is generated, insert the HTML reference to it
sub genHTMLReportGraph {
my $name = shift;
my $title = shift;
my $label = shift;
my $protos = shift || die "genHTMLReportGraph: '$name' missing protocols";
my $field = shift;
my $vars = shift || die "genHTMLReportGraph: '$name' missing vars";
if ($genplotGraphs{$name}) {
print "Graph $name has already been generated.\n";
return;
}
$genplotGraphs{$name} = $title;
# Delineate and tag each graph
print RESULTSHTML "<A NAME=$name><HR SIZE=4 WIDTH=\"90%\"></A>\n";
if (genPlot ($name, $title, $label, $protos, $field, $vars) > 0) {
print RESULTSHTML <<END;
<P><H3>$title</H3>
<IMG SRC=$name.$params{IMAGETYPE} ALT="$label"></P>
END
} else {
print RESULTSHTML "<BR>Graph \"$name\" contained no data (@{$vars}).<BR>\n";
}
}
# Write the final parts of the HTML page
sub genHTMLReportEnd {
print RESULTSHTML <<END;
<!-- INSERT IMAGES HERE - DO NOT DELETE THIS LINE -->
</CENTER>
<A NAME=EndSection></A>
END
if ($params{SYSCONFIG}) {
print RESULTSHTML "<HR WIDTH=\"100%\">";
print RESULTSHTML "<CENTER><H2>Details</H2></CENTER>\n";
if (($params{SYSCONFIG} =~ m/^\S+$/o)
&& (open(SCFILE, "<$params{SYSCONFIG}"))) { # see if its a file
while (<SCFILE>) {
print RESULTSHTML $_;
}
close(SCFILE);
} else { # output text directly
my $l = $params{SYSCONFIG};
$l =~ s/\\\n/\n/g; # turn quoted newline to plain newline
print RESULTSHTML $l;
}
}
print RESULTSHTML <<END;
<HR NOSHADE WIDTH="100%">
</BODY>
</HTML>
END
close(RESULTSHTML);
}
# Actually generate the standard stuff
setupTotals();
genTextReport();
genHTMLReportStart();
my $graphCount = 0;
foreach $section (@workload) {
next unless ($section->{sectionTitle} =~ /GRAPH/o);
my $name = $section->{sectionParams};
$name =~ s/name=\s*//; # strip off initial bit
my @varlist = split (/[\s,]+/, $section->{VARIABLES});
$graphCount++;
genHTMLReportGraph ($name, $section->{TITLE}, $section->{LABEL},
($section->{FIELD} =~ /Time/o)
? \@protocols : \@protocolsAll,
$section->{FIELD}, \@varlist);
}
if ($graphCount <= 0) { # use built ins
# generate the graphs we want
# NOTE: the first argument (name), must be unique; sets file name
genHTMLReportGraph ("connects",
"Number of connections attempted", "Connections/sec",
\@protocolsAll, "Try", ["conn" ]);
genHTMLReportGraph ("connections",
"Total connections", "Connections",
\@protocolsAll, "", ["connections" ]);
genHTMLReportGraph ("errors",
"Number of connection errors", "Errors/sec",
\@protocolsAll, "Error", ["conn", "banner", "login", "logout" ]);
genHTMLReportGraph ("retrieves",
"Number of messages read", "Messages/sec",
\@protocolsAll, "Try", ["retrieve" ]);
genHTMLReportGraph ("submits",
"Number of messages written", "Messages/sec",
\@protocolsAll, "Try", ["submit" ]);
genHTMLReportGraph ("commands",
"Protocol commands", "Commands/sec",
\@protocolsAll, "Try", ["cmd" ]);
genHTMLReportGraph ("readBytes",
"Bytes read", "Bytes/sec",
\@protocolsAll, "BytesR", ["login", "banner", "cmd", "retrieve", "submit", "logout" ]);
genHTMLReportGraph ("writeBytes",
"Bytes written", "Bytes/sec",
\@protocolsAll, "BytesW", ["login", "banner", "cmd", "retrieve", "submit", "logout" ]);
genHTMLReportGraph ("msgTime",
"Message transfer time", "Seconds per message",
\@protocols, "Time", ["cmd", "submit", "retrieve" ]);
genHTMLReportGraph ("setupTime",
"Connection setup time", "Seconds per connection",
\@protocols, "Time", ["conn", "banner", "login" ]);
genHTMLReportGraph ("blocks",
"Number of mailstone blocks executed", "Blocks/sec",
\@protocolsAll, "", ["blocks" ]);
}
if ($params{ADDGRAPHS}) { # pick up additional graphs
my @graphs = ();
readWorkloadFile ($params{ADDGRAPHS}, \@graphs);
foreach $section (@graphs) {
next unless ($section->{sectionTitle} =~ /GRAPH/o);
my $name = $section->{sectionParams};
$name =~ s/name=\s*//; # strip off initial bit
my @varlist = split (/[\s,]+/, $section->{VARIABLES});
$graphCount++;
genHTMLReportGraph ($name, $section->{TITLE}, $section->{LABEL},
($section->{FIELD} =~ /Time/o)
? \@protocols : \@protocolsAll,
$section->{FIELD}, \@varlist);
}
}
genHTMLReportEnd();
return 1;
Reference in New Issue View Git Blame Copy Permalink