Magic-Mirror/gecko-dev
1
0
Fork 0
mirror of https://github.com/mozilla/gecko-dev.git synced 2024-11-25 22:01:30 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
6c3b0b3035
gecko-dev/xpcom/threads/plevent.c

1737 lines
48 KiB
C
Raw Blame History

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org Code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either of the GNU General Public License Version 2 or later (the "GPL"),
* or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#if defined(_WIN32)
#include <windows.h>
#endif
#if defined(XP_OS2)
#define INCL_DOS
#define INCL_DOSERRORS
#define INCL_WIN
#include <os2.h>
#define DefWindowProc WinDefWindowProc
#endif /* XP_OS2 */
#include "nspr.h"
#include "plevent.h"
#if !defined(WIN32)
#include <errno.h>
#include <stddef.h>
#if !defined(XP_OS2)
#include <unistd.h>
#endif /* !XP_OS2 */
#endif /* !Win32 */
#if defined(XP_UNIX)
/* for fcntl */
#include <sys/types.h>
#include <fcntl.h>
#endif
#if defined(XP_BEOS)
#include <kernel/OS.h>
#endif
#if defined(XP_MACOSX)
#if defined(MOZ_WIDGET_COCOA)
#include <CoreFoundation/CoreFoundation.h>
#define MAC_USE_CFRUNLOOPSOURCE
#elif defined(TARGET_CARBON)
/* #include <CarbonEvents.h> */
/* #define MAC_USE_CARBON_EVENT */
#include <CoreFoundation/CoreFoundation.h>
#define MAC_USE_CFRUNLOOPSOURCE
#endif
#endif
#include "private/pprthred.h"
#if defined(VMS)
/*
** On OpenVMS, XtAppAddInput doesn't want a regular fd, instead it
** wants an event flag. So, we don't create and use a pipe for
** notification of when an event queue has something ready, instead
** we use an event flag. Shouldn't be a problem if we only have
** a few event queues.
*/
#include <lib$routines.h>
#include <starlet.h>
#include <stsdef.h>
#endif /* VMS */
#if defined(_WIN32)
/* Comment out the following USE_TIMER define to prevent
* WIN32 from using a WIN32 native timer for PLEvent notification.
* With USE_TIMER defined we will use a timer when pending input
* or paint events are starved, otherwise it will use a posted
* WM_APP msg for PLEvent notification.
*/
#ifndef WINCE
#define USE_TIMER
#endif
/* Threshold defined in milliseconds for determining when the input
* and paint events have been held in the WIN32 msg queue too long
*/
#define INPUT_STARVATION_LIMIT 50
/* The paint starvation limit is set to the smallest value which
* does not cause performance degradation while running page load tests
*/
#define PAINT_STARVATION_LIMIT 750
/* The WIN9X paint starvation limit is larger because it was
* determined that the following value was required to prevent performance
* degradation on page load tests for WIN98/95 only.
*/
#define WIN9X_PAINT_STARVATION_LIMIT 3000
#define TIMER_ID 0
/* If _md_PerformanceSetting <=0 then no event starvation otherwise events will be starved */
static PRInt32 _md_PerformanceSetting = 0;
static PRUint32 _md_StarvationDelay = 0;
static PRUint32 _md_SwitchTime = 0;
#endif
static PRLogModuleInfo *event_lm = NULL;
/*******************************************************************************
* Private Stuff
******************************************************************************/
/*
** EventQueueType -- Defines notification type for an event queue
**
*/
typedef enum {
EventQueueIsNative = 1,
EventQueueIsMonitored = 2
} EventQueueType;
struct PLEventQueue {
const char* name;
PRCList queue;
PRMonitor* monitor;
PRThread* handlerThread;
EventQueueType type;
PRPackedBool processingEvents;
PRPackedBool notified;
#if defined(_WIN32)
PRPackedBool timerSet;
#endif
#if defined(XP_UNIX) && !defined(XP_MACOSX)
#if defined(VMS)
int efn;
#else
PRInt32 eventPipe[2];
#endif
PLGetEventIDFunc idFunc;
void* idFuncClosure;
#elif defined(_WIN32) || defined(XP_OS2)
HWND eventReceiverWindow;
PRBool removeMsg;
#elif defined(XP_BEOS)
port_id eventport;
#elif defined(XP_MACOSX)
#if defined(MAC_USE_CFRUNLOOPSOURCE)
CFRunLoopSourceRef mRunLoopSource;
CFRunLoopRef mMainRunLoop;
#elif defined(MAC_USE_CARBON_EVENT)
EventHandlerUPP eventHandlerUPP;
EventHandlerRef eventHandlerRef;
#endif
#endif
};
#define PR_EVENT_PTR(_qp) \
((PLEvent*) ((char*) (_qp) - offsetof(PLEvent, link)))
static PRStatus _pl_SetupNativeNotifier(PLEventQueue* self);
static void _pl_CleanupNativeNotifier(PLEventQueue* self);
static PRStatus _pl_NativeNotify(PLEventQueue* self);
static PRStatus _pl_AcknowledgeNativeNotify(PLEventQueue* self);
static void _md_CreateEventQueue( PLEventQueue *eventQueue );
static PRInt32 _pl_GetEventCount(PLEventQueue* self);
#if defined(_WIN32) || defined(XP_OS2)
#if defined(XP_OS2)
ULONG _pr_PostEventMsgId;
#else
UINT _pr_PostEventMsgId;
#endif /* OS2 */
static char *_pr_eventWindowClass = "XPCOM:EventWindow";
#endif /* Win32, OS2 */
#if defined(_WIN32)
static LPCTSTR _md_GetEventQueuePropName() {
static ATOM atom = 0;
if (!atom) {
atom = GlobalAddAtom("XPCOM_EventQueue");
}
return MAKEINTATOM(atom);
}
#endif
#if defined(MAC_USE_CARBON_EVENT)
enum {
kEventClassPL = FOUR_CHAR_CODE('PLEC'),
kEventProcessPLEvents = 1,
kEventParamPLEventQueue = FOUR_CHAR_CODE('OWNQ')
};
static pascal Boolean _md_CarbonEventComparator(EventRef inEvent, void *inCompareData);
#endif
/*******************************************************************************
* Event Queue Operations
******************************************************************************/
/*
** _pl_CreateEventQueue() -- Create the event queue
**
**
*/
static PLEventQueue * _pl_CreateEventQueue(const char *name,
PRThread *handlerThread,
EventQueueType qtype)
{
PRStatus err;
PLEventQueue* self = NULL;
PRMonitor* mon = NULL;
if (event_lm == NULL)
event_lm = PR_NewLogModule("event");
self = PR_NEWZAP(PLEventQueue);
if (self == NULL) return NULL;
mon = PR_NewNamedMonitor(name);
if (mon == NULL) goto error;
self->name = name;
self->monitor = mon;
self->handlerThread = handlerThread;
self->processingEvents = PR_FALSE;
self->type = qtype;
#if defined(_WIN32)
self->timerSet = PR_FALSE;
#endif
#if defined(_WIN32) || defined(XP_OS2)
self->removeMsg = PR_TRUE;
#endif
self->notified = PR_FALSE;
PR_INIT_CLIST(&self->queue);
if ( qtype == EventQueueIsNative ) {
err = _pl_SetupNativeNotifier(self);
if (err) goto error;
_md_CreateEventQueue( self );
}
return self;
error:
if (mon != NULL)
PR_DestroyMonitor(mon);
PR_DELETE(self);
return NULL;
}
PLEventQueue*
PL_CreateEventQueue(const char* name, PRThread* handlerThread)
{
return( _pl_CreateEventQueue( name, handlerThread, EventQueueIsNative ));
}
PLEventQueue *
PL_CreateNativeEventQueue(const char *name, PRThread *handlerThread)
{
return( _pl_CreateEventQueue( name, handlerThread, EventQueueIsNative ));
}
PLEventQueue *
PL_CreateMonitoredEventQueue(const char *name, PRThread *handlerThread)
{
return( _pl_CreateEventQueue( name, handlerThread, EventQueueIsMonitored ));
}
PRMonitor*
PL_GetEventQueueMonitor(PLEventQueue* self)
{
return self->monitor;
}
static void PR_CALLBACK
_pl_destroyEvent(PLEvent* event, void* data, PLEventQueue* queue)
{
PL_DequeueEvent(event, queue);
PL_DestroyEvent(event);
}
void
PL_DestroyEventQueue(PLEventQueue* self)
{
PR_EnterMonitor(self->monitor);
/* destroy undelivered events */
PL_MapEvents(self, _pl_destroyEvent, NULL);
if ( self->type == EventQueueIsNative )
_pl_CleanupNativeNotifier(self);
/* destroying the monitor also destroys the name */
PR_ExitMonitor(self->monitor);
PR_DestroyMonitor(self->monitor);
PR_DELETE(self);
}
PRStatus
PL_PostEvent(PLEventQueue* self, PLEvent* event)
{
PRStatus err = PR_SUCCESS;
PRMonitor* mon;
if (self == NULL)
return PR_FAILURE;
mon = self->monitor;
PR_EnterMonitor(mon);
#if defined(XP_UNIX) && !defined(XP_MACOSX)
if (self->idFunc && event)
event->id = self->idFunc(self->idFuncClosure);
#endif
/* insert event into thread's event queue: */
if (event != NULL) {
PR_APPEND_LINK(&event->link, &self->queue);
}
if (self->type == EventQueueIsNative && !self->notified) {
err = _pl_NativeNotify(self);
if (err != PR_SUCCESS)
goto error;
self->notified = PR_TRUE;
}
/*
* This may fall on deaf ears if we're really notifying the native
* thread, and no one has called PL_WaitForEvent (or PL_EventLoop):
*/
err = PR_Notify(mon);
error:
PR_ExitMonitor(mon);
return err;
}
void*
PL_PostSynchronousEvent(PLEventQueue* self, PLEvent* event)
{
void* result;
if (self == NULL)
return NULL;
PR_ASSERT(event != NULL);
if (PR_GetCurrentThread() == self->handlerThread) {
/* Handle the case where the thread requesting the event handling
* is also the thread that's supposed to do the handling. */
result = event->handler(event);
}
else {
int i, entryCount;
event->lock = PR_NewLock();
if (!event->lock) {
return NULL;
}
event->condVar = PR_NewCondVar(event->lock);
if(!event->condVar) {
PR_DestroyLock(event->lock);
event->lock = NULL;
return NULL;
}
PR_Lock(event->lock);
entryCount = PR_GetMonitorEntryCount(self->monitor);
event->synchronousResult = (void*)PR_TRUE;
PL_PostEvent(self, event);
/* We need temporarily to give up our event queue monitor if
we're holding it, otherwise, the thread we're going to wait
for notification from won't be able to enter it to process
the event. */
if (entryCount) {
for (i = 0; i < entryCount; i++)
PR_ExitMonitor(self->monitor);
}
event->handled = PR_FALSE;
while (!event->handled) {
/* wait for event to be handled or destroyed */
PR_WaitCondVar(event->condVar, PR_INTERVAL_NO_TIMEOUT);
}
if (entryCount) {
for (i = 0; i < entryCount; i++)
PR_EnterMonitor(self->monitor);
}
result = event->synchronousResult;
event->synchronousResult = NULL;
PR_Unlock(event->lock);
}
/* For synchronous events, they're destroyed here on the caller's
thread before the result is returned. See PL_HandleEvent. */
PL_DestroyEvent(event);
return result;
}
PLEvent*
PL_GetEvent(PLEventQueue* self)
{
PLEvent* event = NULL;
PRStatus err = PR_SUCCESS;
if (self == NULL)
return NULL;
PR_EnterMonitor(self->monitor);
if (!PR_CLIST_IS_EMPTY(&self->queue)) {
if ( self->type == EventQueueIsNative &&
self->notified &&
!self->processingEvents &&
0 == _pl_GetEventCount(self) )
{
err = _pl_AcknowledgeNativeNotify(self);
self->notified = PR_FALSE;
}
if (err)
goto done;
/* then grab the event and return it: */
event = PR_EVENT_PTR(self->queue.next);
PR_REMOVE_AND_INIT_LINK(&event->link);
}
done:
PR_ExitMonitor(self->monitor);
return event;
}
PRBool
PL_EventAvailable(PLEventQueue* self)
{
PRBool result = PR_FALSE;
if (self == NULL)
return PR_FALSE;
PR_EnterMonitor(self->monitor);
if (!PR_CLIST_IS_EMPTY(&self->queue))
result = PR_TRUE;
PR_ExitMonitor(self->monitor);
return result;
}
void
PL_MapEvents(PLEventQueue* self, PLEventFunProc fun, void* data)
{
PRCList* qp;
if (self == NULL)
return;
PR_EnterMonitor(self->monitor);
qp = self->queue.next;
while (qp != &self->queue) {
PLEvent* event = PR_EVENT_PTR(qp);
qp = qp->next;
(*fun)(event, data, self);
}
PR_ExitMonitor(self->monitor);
}
static void PR_CALLBACK
_pl_DestroyEventForOwner(PLEvent* event, void* owner, PLEventQueue* queue)
{
PR_ASSERT(PR_GetMonitorEntryCount(queue->monitor) > 0);
if (event->owner == owner) {
PR_LOG(event_lm, PR_LOG_DEBUG,
("$$$ \tdestroying event %0x for owner %0x", event, owner));
PL_DequeueEvent(event, queue);
if (event->synchronousResult == (void*)PR_TRUE) {
PR_Lock(event->lock);
event->synchronousResult = NULL;
event->handled = PR_TRUE;
PR_NotifyCondVar(event->condVar);
PR_Unlock(event->lock);
}
else {
PL_DestroyEvent(event);
}
}
else {
PR_LOG(event_lm, PR_LOG_DEBUG,
("$$$ \tskipping event %0x for owner %0x", event, owner));
}
}
void
PL_RevokeEvents(PLEventQueue* self, void* owner)
{
if (self == NULL)
return;
PR_LOG(event_lm, PR_LOG_DEBUG,
("$$$ revoking events for owner %0x", owner));
/*
** First we enter the monitor so that no one else can post any events
** to the queue:
*/
PR_EnterMonitor(self->monitor);
PR_LOG(event_lm, PR_LOG_DEBUG, ("$$$ owner %0x, entered monitor", owner));
/*
** Discard any pending events for this owner:
*/
PL_MapEvents(self, _pl_DestroyEventForOwner, owner);
#ifdef DEBUG
{
PRCList* qp = self->queue.next;
while (qp != &self->queue) {
PLEvent* event = PR_EVENT_PTR(qp);
qp = qp->next;
PR_ASSERT(event->owner != owner);
}
}
#endif /* DEBUG */
PR_ExitMonitor(self->monitor);
PR_LOG(event_lm, PR_LOG_DEBUG,
("$$$ revoking events for owner %0x", owner));
}
static PRInt32
_pl_GetEventCount(PLEventQueue* self)
{
PRCList* node;
PRInt32 count = 0;
PR_EnterMonitor(self->monitor);
node = PR_LIST_HEAD(&self->queue);
while (node != &self->queue) {
count++;
node = PR_NEXT_LINK(node);
}
PR_ExitMonitor(self->monitor);
return count;
}
void
PL_ProcessPendingEvents(PLEventQueue* self)
{
PRInt32 count;
if (self == NULL)
return;
PR_EnterMonitor(self->monitor);
if (self->processingEvents) {
_pl_AcknowledgeNativeNotify(self);
self->notified = PR_FALSE;
PR_ExitMonitor(self->monitor);
return;
}
self->processingEvents = PR_TRUE;
/* Only process the events that are already in the queue, and
* not any new events that get added. Do this by counting the
* number of events currently in the queue
*/
count = _pl_GetEventCount(self);
PR_ExitMonitor(self->monitor);
while (count-- > 0) {
PLEvent* event = PL_GetEvent(self);
if (event == NULL)
break;
PR_LOG(event_lm, PR_LOG_DEBUG, ("$$$ processing event"));
PL_HandleEvent(event);
PR_LOG(event_lm, PR_LOG_DEBUG, ("$$$ done processing event"));
}
PR_EnterMonitor(self->monitor);
if (self->type == EventQueueIsNative) {
count = _pl_GetEventCount(self);
if (count <= 0) {
_pl_AcknowledgeNativeNotify(self);
self->notified = PR_FALSE;
}
else {
_pl_NativeNotify(self);
self->notified = PR_TRUE;
}
}
self->processingEvents = PR_FALSE;
PR_ExitMonitor(self->monitor);
}
/*******************************************************************************
* Event Operations
******************************************************************************/
void
PL_InitEvent(PLEvent* self, void* owner,
PLHandleEventProc handler,
PLDestroyEventProc destructor)
{
#ifdef PL_POST_TIMINGS
self->postTime = PR_IntervalNow();
#endif
PR_INIT_CLIST(&self->link);
self->handler = handler;
self->destructor = destructor;
self->owner = owner;
self->synchronousResult = NULL;
self->handled = PR_FALSE;
self->lock = NULL;
self->condVar = NULL;
#if defined(XP_UNIX) && !defined(XP_MACOSX)
self->id = 0;
#endif
}
void*
PL_GetEventOwner(PLEvent* self)
{
return self->owner;
}
void
PL_HandleEvent(PLEvent* self)
{
void* result;
if (self == NULL)
return;
/* This event better not be on an event queue anymore. */
PR_ASSERT(PR_CLIST_IS_EMPTY(&self->link));
result = self->handler(self);
if (NULL != self->synchronousResult) {
PR_Lock(self->lock);
self->synchronousResult = result;
self->handled = PR_TRUE;
PR_NotifyCondVar(self->condVar);
PR_Unlock(self->lock);
}
else {
/* For asynchronous events, they're destroyed by the event-handler
thread. See PR_PostSynchronousEvent. */
PL_DestroyEvent(self);
}
}
#ifdef PL_POST_TIMINGS
static long s_eventCount = 0;
static long s_totalTime = 0;
#endif
void
PL_DestroyEvent(PLEvent* self)
{
if (self == NULL)
return;
/* This event better not be on an event queue anymore. */
PR_ASSERT(PR_CLIST_IS_EMPTY(&self->link));
if(self->condVar)
PR_DestroyCondVar(self->condVar);
if(self->lock)
PR_DestroyLock(self->lock);
#ifdef PL_POST_TIMINGS
s_totalTime += PR_IntervalNow() - self->postTime;
s_eventCount++;
printf("$$$ running avg (%d) \n", PR_IntervalToMilliseconds(s_totalTime/s_eventCount));
#endif
self->destructor(self);
}
void
PL_DequeueEvent(PLEvent* self, PLEventQueue* queue)
{
if (self == NULL)
return;
/* Only the owner is allowed to dequeue events because once the
client has put it in the queue, they have no idea whether it's
been processed and destroyed or not. */
PR_ASSERT(queue->handlerThread == PR_GetCurrentThread());
PR_EnterMonitor(queue->monitor);
PR_ASSERT(!PR_CLIST_IS_EMPTY(&self->link));
#if 0
/* I do not think that we need to do this anymore.
if we do not acknowledge and this is the only
only event in the queue, any calls to process
the eventQ will be effective noop.
*/
if (queue->type == EventQueueIsNative)
_pl_AcknowledgeNativeNotify(queue);
#endif
PR_REMOVE_AND_INIT_LINK(&self->link);
PR_ExitMonitor(queue->monitor);
}
void
PL_FavorPerformanceHint(PRBool favorPerformanceOverEventStarvation,
PRUint32 starvationDelay)
{
#if defined(_WIN32)
_md_StarvationDelay = starvationDelay;
if (favorPerformanceOverEventStarvation) {
_md_PerformanceSetting++;
return;
}
_md_PerformanceSetting--;
if (_md_PerformanceSetting == 0) {
/* Switched from allowing event starvation to no event starvation so grab
the current time to determine when to actually switch to using timers
instead of posted WM_APP messages. */
_md_SwitchTime = PR_IntervalToMilliseconds(PR_IntervalNow());
}
#endif
}
/*******************************************************************************
* Pure Event Queues
*
* For when you're only processing PLEvents and there is no native
* select, thread messages, or AppleEvents.
******************************************************************************/
PLEvent*
PL_WaitForEvent(PLEventQueue* self)
{
PLEvent* event;
PRMonitor* mon;
if (self == NULL)
return NULL;
mon = self->monitor;
PR_EnterMonitor(mon);
while ((event = PL_GetEvent(self)) == NULL) {
PRStatus err;
PR_LOG(event_lm, PR_LOG_DEBUG, ("$$$ waiting for event"));
err = PR_Wait(mon, PR_INTERVAL_NO_TIMEOUT);
if ((err == PR_FAILURE)
&& (PR_PENDING_INTERRUPT_ERROR == PR_GetError())) break;
}
PR_ExitMonitor(mon);
return event;
}
void
PL_EventLoop(PLEventQueue* self)
{
if (self == NULL)
return;
while (PR_TRUE) {
PLEvent* event = PL_WaitForEvent(self);
if (event == NULL) {
/* This can only happen if the current thread is interrupted */
return;
}
PR_LOG(event_lm, PR_LOG_DEBUG, ("$$$ processing event"));
PL_HandleEvent(event);
PR_LOG(event_lm, PR_LOG_DEBUG, ("$$$ done processing event"));
}
}
/*******************************************************************************
* Native Event Queues
*
* For when you need to call select, or WaitNextEvent, and yet also want
* to handle PLEvents.
******************************************************************************/
static PRStatus
_pl_SetupNativeNotifier(PLEventQueue* self)
{
#if defined(VMS)
unsigned int status;
self->idFunc = 0;
self->idFuncClosure = 0;
status = LIB$GET_EF(&self->efn);
if (!$VMS_STATUS_SUCCESS(status))
return PR_FAILURE;
PR_LOG(event_lm, PR_LOG_DEBUG,
("$$$ Allocated event flag %d", self->efn));
return PR_SUCCESS;
#elif defined(XP_UNIX) && !defined(XP_MACOSX)
int err;
int flags;
self->idFunc = 0;
self->idFuncClosure = 0;
err = pipe(self->eventPipe);
if (err != 0) {
return PR_FAILURE;
}
/* make the pipe nonblocking */
flags = fcntl(self->eventPipe[0], F_GETFL, 0);
if (flags == -1) {
goto failed;
}
err = fcntl(self->eventPipe[0], F_SETFL, flags | O_NONBLOCK);
if (err == -1) {
goto failed;
}
flags = fcntl(self->eventPipe[1], F_GETFL, 0);
if (flags == -1) {
goto failed;
}
err = fcntl(self->eventPipe[1], F_SETFL, flags | O_NONBLOCK);
if (err == -1) {
goto failed;
}
return PR_SUCCESS;
failed:
close(self->eventPipe[0]);
close(self->eventPipe[1]);
return PR_FAILURE;
#elif defined(XP_BEOS)
/* hook up to the nsToolkit queue, however the appshell
* isn't necessairly started, so we might have to create
* the queue ourselves
*
* Set up the port for communicating. As restarts thru execv may occur
* and ports survive those (with faulty events as result). Combined with the fact
* that nsAppShell.cpp may or may not have created the port we need to take extra
* care that the port is created for this launch, otherwise we need to reopen it
* so that faulty messages gets lost.
*
* We do this by checking if the sem has been created. If it is we can reuse the port (if it exists).
* Otherwise we need to create the sem and the port, deleting any open ports before.
*/
sem_info info;
int32 cookie = 0;
char portname[64];
char semname[64];
PR_snprintf(portname, sizeof(portname), "event%lx",
(long unsigned) self->handlerThread);
PR_snprintf(semname, sizeof(semname), "sync%lx",
(long unsigned) self->handlerThread);
self->eventport = find_port(portname);
while(get_next_sem_info(0, &cookie, &info) == B_OK)
{
if(strcmp(semname, info.name) != 0) {
continue;
}
/* found semaphore */
if(self->eventport < 0) {
self->eventport = create_port(200, portname);
}
return PR_SUCCESS;
}
/* setup the port and semaphore */
if(self->eventport >= 0)
{
delete_port( self->eventport );
}
self->eventport = create_port(200, portname);
/* We don't use the sem, but it has to be there
*/
create_sem(0, semname);
return PR_SUCCESS;
#else
return PR_SUCCESS;
#endif
}
static void
_pl_CleanupNativeNotifier(PLEventQueue* self)
{
#if defined(VMS)
{
unsigned int status;
PR_LOG(event_lm, PR_LOG_DEBUG,
("$$$ Freeing event flag %d", self->efn));
status = LIB$FREE_EF(&self->efn);
}
#elif defined(XP_UNIX) && !defined(XP_MACOSX)
close(self->eventPipe[0]);
close(self->eventPipe[1]);
#elif defined(_WIN32)
if (self->timerSet) {
KillTimer(self->eventReceiverWindow, TIMER_ID);
self->timerSet = PR_FALSE;
}
RemoveProp(self->eventReceiverWindow, _md_GetEventQueuePropName());
/* DestroyWindow doesn't do anything when called from a non ui thread. Since
* self->eventReceiverWindow was created on the ui thread, it must be destroyed
* on the ui thread.
*/
SendMessage(self->eventReceiverWindow, WM_CLOSE, 0, 0);
#elif defined(XP_OS2)
WinDestroyWindow(self->eventReceiverWindow);
#elif defined(MAC_USE_CFRUNLOOPSOURCE)
CFRunLoopRemoveSource(self->mMainRunLoop, self->mRunLoopSource, kCFRunLoopCommonModes);
CFRelease(self->mRunLoopSource);
CFRelease(self->mMainRunLoop);
#elif defined(MAC_USE_CARBON_EVENT)
EventComparatorUPP comparator = NewEventComparatorUPP(_md_CarbonEventComparator);
PR_ASSERT(comparator != NULL);
if (comparator) {
FlushSpecificEventsFromQueue(GetMainEventQueue(), comparator, self);
DisposeEventComparatorUPP(comparator);
}
DisposeEventHandlerUPP(self->eventHandlerUPP);
RemoveEventHandler(self->eventHandlerRef);
#endif
}
#if defined(_WIN32)
static PRBool _md_WasInputPending = PR_FALSE;
static PRUint32 _md_InputTime = 0;
static PRBool _md_WasPaintPending = PR_FALSE;
static PRUint32 _md_PaintTime = 0;
/* last mouse location */
static POINT _md_LastMousePos;
/*******************************************************************************
* Timer callback function. Timers are used on WIN32 instead of APP events
* when there are pending UI events because APP events can cause the GUI to lockup
* because posted messages are processed before other messages.
******************************************************************************/
static void CALLBACK _md_TimerProc( HWND hwnd, UINT uMsg, UINT idEvent, DWORD dwTime )
{
PREventQueue* queue = (PREventQueue *) GetProp(hwnd, _md_GetEventQueuePropName());
PR_ASSERT(queue != NULL);
KillTimer(hwnd, TIMER_ID);
queue->timerSet = PR_FALSE;
queue->removeMsg = PR_FALSE;
PL_ProcessPendingEvents( queue );
queue->removeMsg = PR_TRUE;
}
static PRBool _md_IsWIN9X = PR_FALSE;
static PRBool _md_IsOSSet = PR_FALSE;
static void _md_DetermineOSType()
{
OSVERSIONINFO os;
os.dwOSVersionInfoSize = sizeof(OSVERSIONINFO);
GetVersionEx(&os);
if (VER_PLATFORM_WIN32_WINDOWS == os.dwPlatformId) {
_md_IsWIN9X = PR_TRUE;
}
}
static PRUint32 _md_GetPaintStarvationLimit()
{
if (! _md_IsOSSet) {
_md_DetermineOSType();
_md_IsOSSet = PR_TRUE;
}
if (_md_IsWIN9X) {
return WIN9X_PAINT_STARVATION_LIMIT;
}
return PAINT_STARVATION_LIMIT;
}
/*
* Determine if an event is being starved (i.e the starvation limit has
* been exceeded.
* Note: this function uses the current setting and updates the contents
* of the wasPending and lastTime arguments
*
* ispending: PR_TRUE if the event is currently pending
* starvationLimit: Threshold defined in milliseconds for determining when
* the event has been held in the queue too long
* wasPending: PR_TRUE if the last time _md_EventIsStarved was called
* the event was pending. This value is updated within
* this function.
* lastTime: Holds the last time the event was in the queue.
* This value is updated within this function
* returns: PR_TRUE if the event is starved, PR_FALSE otherwise
*/
static PRBool _md_EventIsStarved(PRBool isPending, PRUint32 starvationLimit,
PRBool *wasPending, PRUint32 *lastTime,
PRUint32 currentTime)
{
if (*wasPending && isPending) {
/*
* It was pending previously and the event is still
* pending so check to see if the elapsed time is
* over the limit which indicates the event was starved
*/
if ((currentTime - *lastTime) > starvationLimit) {
return PR_TRUE; /* pending and over the limit */
}
return PR_FALSE; /* pending but within the limit */
}
if (isPending) {
/*
* was_pending must be false so record the current time
* so the elapsed time can be computed the next time this
* function is called
*/
*lastTime = currentTime;
*wasPending = PR_TRUE;
return PR_FALSE;
}
/* Event is no longer pending */
*wasPending = PR_FALSE;
return PR_FALSE;
}
/* Determines if the there is a pending Mouse or input event */
static PRBool _md_IsInputPending(WORD qstatus)
{
/* Return immediately there aren't any pending input or paints. */
if (qstatus == 0) {
return PR_FALSE;
}
/* Is there anything other than a QS_MOUSEMOVE pending? */
if ((qstatus & QS_MOUSEBUTTON) ||
(qstatus & QS_KEY)
#ifndef WINCE
|| (qstatus & QS_HOTKEY)
#endif
) {
return PR_TRUE;
}
/*
* Mouse moves need extra processing to determine if the mouse
* pointer actually changed location because Windows automatically
* generates WM_MOVEMOVE events when a new window is created which
* we need to filter out.
*/
if (qstatus & QS_MOUSEMOVE) {
POINT cursorPos;
GetCursorPos(&cursorPos);
if ((_md_LastMousePos.x == cursorPos.x) &&
(_md_LastMousePos.y == cursorPos.y)) {
return PR_FALSE; /* This is a fake mouse move */
}
/* Real mouse move */
_md_LastMousePos.x = cursorPos.x;
_md_LastMousePos.y = cursorPos.y;
return PR_TRUE;
}
return PR_FALSE;
}
static PRStatus
_pl_NativeNotify(PLEventQueue* self)
{
#ifdef USE_TIMER
WORD qstatus;
PRUint32 now = PR_IntervalToMilliseconds(PR_IntervalNow());
/* Since calls to set the _md_PerformanceSetting can be nested
* only performance setting values <= 0 will potentially trigger
* the use of a timer.
*/
if ((_md_PerformanceSetting <= 0) &&
((now - _md_SwitchTime) > _md_StarvationDelay)) {
SetTimer(self->eventReceiverWindow, TIMER_ID, 0 ,_md_TimerProc);
self->timerSet = PR_TRUE;
_md_WasInputPending = PR_FALSE;
_md_WasPaintPending = PR_FALSE;
return PR_SUCCESS;
}
qstatus = HIWORD(GetQueueStatus(QS_INPUT | QS_PAINT));
/* Check for starved input */
if (_md_EventIsStarved( _md_IsInputPending(qstatus),
INPUT_STARVATION_LIMIT,
&_md_WasInputPending,
&_md_InputTime,
now )) {
/*
* Use a timer for notification. Timers have the lowest priority.
* They are not processed until all other events have been processed.
* This allows any starved paints and input to be processed.
*/
SetTimer(self->eventReceiverWindow, TIMER_ID, 0 ,_md_TimerProc);
self->timerSet = PR_TRUE;
/*
* Clear any pending paint. _md_WasInputPending was cleared in
* _md_EventIsStarved.
*/
_md_WasPaintPending = PR_FALSE;
return PR_SUCCESS;
}
if (_md_EventIsStarved( (qstatus & QS_PAINT),
_md_GetPaintStarvationLimit(),
&_md_WasPaintPending,
&_md_PaintTime,
now) ) {
/*
* Use a timer for notification. Timers have the lowest priority.
* They are not processed until all other events have been processed.
* This allows any starved paints and input to be processed
*/
SetTimer(self->eventReceiverWindow, TIMER_ID, 0 ,_md_TimerProc);
self->timerSet = PR_TRUE;
/*
* Clear any pending input. _md_WasPaintPending was cleared in
* _md_EventIsStarved.
*/
_md_WasInputPending = PR_FALSE;
return PR_SUCCESS;
}
/*
* Nothing is being starved so post a message instead of using a timer.
* Posted messages are processed before other messages so they have the
* highest priority.
*/
#endif
PostMessage( self->eventReceiverWindow, _pr_PostEventMsgId,
(WPARAM)0, (LPARAM)self );
return PR_SUCCESS;
}/* --- end _pl_NativeNotify() --- */
#endif
#if defined(XP_OS2)
static PRStatus
_pl_NativeNotify(PLEventQueue* self)
{
BOOL rc = WinPostMsg( self->eventReceiverWindow, _pr_PostEventMsgId,
0, MPFROMP(self));
return (rc == TRUE) ? PR_SUCCESS : PR_FAILURE;
}/* --- end _pl_NativeNotify() --- */
#endif /* XP_OS2 */
#if defined(VMS)
/* Just set the event flag */
static PRStatus
_pl_NativeNotify(PLEventQueue* self)
{
unsigned int status;
PR_LOG(event_lm, PR_LOG_DEBUG,
("_pl_NativeNotify: self=%p efn=%d",
self, self->efn));
status = SYS$SETEF(self->efn);
return ($VMS_STATUS_SUCCESS(status)) ? PR_SUCCESS : PR_FAILURE;
}/* --- end _pl_NativeNotify() --- */
#elif defined(XP_UNIX) && !defined(XP_MACOSX)
static PRStatus
_pl_NativeNotify(PLEventQueue* self)
{
#define NOTIFY_TOKEN 0xFA
PRInt32 count;
unsigned char buf[] = { NOTIFY_TOKEN };
PR_LOG(event_lm, PR_LOG_DEBUG,
("_pl_NativeNotify: self=%p",
self));
count = write(self->eventPipe[1], buf, 1);
if (count == 1)
return PR_SUCCESS;
if (count == -1 && (errno == EAGAIN || errno == EWOULDBLOCK))
return PR_SUCCESS;
return PR_FAILURE;
}/* --- end _pl_NativeNotify() --- */
#endif /* defined(XP_UNIX) && !defined(XP_MACOSX) */
#if defined(XP_BEOS)
struct ThreadInterfaceData
{
void *data;
thread_id waitingThread;
};
static PRStatus
_pl_NativeNotify(PLEventQueue* self)
{
struct ThreadInterfaceData id;
id.data = self;
id.waitingThread = 0;
write_port(self->eventport, 'natv', &id, sizeof(id));
return PR_SUCCESS; /* Is this correct? */
}
#endif /* XP_BEOS */
#if defined(XP_MACOSX)
static PRStatus
_pl_NativeNotify(PLEventQueue* self)
{
#if defined(MAC_USE_CFRUNLOOPSOURCE)
CFRunLoopSourceSignal(self->mRunLoopSource);
CFRunLoopWakeUp(self->mMainRunLoop);
#elif defined(MAC_USE_CARBON_EVENT)
OSErr err;
EventRef newEvent;
if (CreateEvent(NULL, kEventClassPL, kEventProcessPLEvents,
0, kEventAttributeNone, &newEvent) != noErr)
return PR_FAILURE;
err = SetEventParameter(newEvent, kEventParamPLEventQueue,
typeUInt32, sizeof(PREventQueue*), &self);
if (err == noErr) {
err = PostEventToQueue(GetMainEventQueue(), newEvent, kEventPriorityLow);
ReleaseEvent(newEvent);
}
if (err != noErr)
return PR_FAILURE;
#endif
return PR_SUCCESS;
}
#endif /* defined(XP_MACOSX) */
static PRStatus
_pl_AcknowledgeNativeNotify(PLEventQueue* self)
{
#if defined(_WIN32) || defined(XP_OS2)
#ifdef XP_OS2
QMSG aMsg;
#else
MSG aMsg;
#endif
/*
* only remove msg when we've been called directly by
* PL_ProcessPendingEvents, not when we've been called by
* the window proc because the window proc will remove the
* msg for us.
*/
if (self->removeMsg) {
PR_LOG(event_lm, PR_LOG_DEBUG,
("_pl_AcknowledgeNativeNotify: self=%p", self));
#ifdef XP_OS2
WinPeekMsg((HAB)0, &aMsg, self->eventReceiverWindow,
_pr_PostEventMsgId, _pr_PostEventMsgId, PM_REMOVE);
#else
PeekMessage(&aMsg, self->eventReceiverWindow,
_pr_PostEventMsgId, _pr_PostEventMsgId, PM_REMOVE);
if (self->timerSet) {
KillTimer(self->eventReceiverWindow, TIMER_ID);
self->timerSet = PR_FALSE;
}
#endif
}
return PR_SUCCESS;
#elif defined(VMS)
PR_LOG(event_lm, PR_LOG_DEBUG,
("_pl_AcknowledgeNativeNotify: self=%p efn=%d",
self, self->efn));
/*
** If this is the last entry, then clear the event flag. Also make sure
** the flag is cleared on any spurious wakeups.
*/
sys$clref(self->efn);
return PR_SUCCESS;
#elif defined(XP_UNIX) && !defined(XP_MACOSX)
PRInt32 count;
unsigned char c;
PR_LOG(event_lm, PR_LOG_DEBUG,
("_pl_AcknowledgeNativeNotify: self=%p",
self));
/* consume the byte NativeNotify put in our pipe: */
count = read(self->eventPipe[0], &c, 1);
if ((count == 1) && (c == NOTIFY_TOKEN))
return PR_SUCCESS;
if ((count == -1) && ((errno == EAGAIN) || (errno == EWOULDBLOCK)))
return PR_SUCCESS;
return PR_FAILURE;
#else
/* nothing to do on the other platforms */
return PR_SUCCESS;
#endif
}
PRInt32
PL_GetEventQueueSelectFD(PLEventQueue* self)
{
if (self == NULL)
return -1;
#if defined(VMS)
return -(self->efn);
#elif defined(XP_UNIX) && !defined(XP_MACOSX)
return self->eventPipe[0];
#else
return -1; /* other platforms don't handle this (yet) */
#endif
}
PRBool
PL_IsQueueOnCurrentThread( PLEventQueue *queue )
{
PRThread *me = PR_GetCurrentThread();
return me == queue->handlerThread;
}
PRBool
PL_IsQueueNative(PLEventQueue *queue)
{
return queue->type == EventQueueIsNative ? PR_TRUE : PR_FALSE;
}
#if defined(_WIN32) || defined(XP_OS2)
#ifdef XP_OS2
MRESULT EXPENTRY
_md_EventReceiverProc(HWND hwnd, ULONG uMsg, MPARAM wParam, MPARAM lParam)
#else
LRESULT CALLBACK
_md_EventReceiverProc(HWND hwnd, UINT uMsg, WPARAM wParam, LPARAM lParam)
#endif
{
if (_pr_PostEventMsgId == uMsg )
{
PREventQueue *queue = (PREventQueue *)lParam;
queue->removeMsg = PR_FALSE;
PL_ProcessPendingEvents(queue);
queue->removeMsg = PR_TRUE;
#ifdef XP_OS2
return MRFROMLONG(TRUE);
#else
return TRUE;
#endif
}
return DefWindowProc(hwnd, uMsg, wParam, lParam);
}
static PRBool isInitialized;
static PRCallOnceType once;
static PRLock *initLock;
/*
** InitWinEventLib() -- Create the Windows initialization lock
**
*/
static PRStatus InitEventLib( void )
{
PR_ASSERT( initLock == NULL );
initLock = PR_NewLock();
return initLock ? PR_SUCCESS : PR_FAILURE;
}
#endif /* Win32, OS2 */
#if defined(_WIN32)
/*
** _md_CreateEventQueue() -- ModelDependent initializer
*/
static void _md_CreateEventQueue( PLEventQueue *eventQueue )
{
WNDCLASS wc;
HANDLE h = GetModuleHandle(NULL);
/*
** If this is the first call to PL_InitializeEventsLib(),
** make the call to InitWinEventLib() to create the initLock.
**
** Then lock the initializer lock to insure that
** we have exclusive control over the initialization sequence.
**
*/
/* Register the windows message for XPCOM Event notification */
_pr_PostEventMsgId = RegisterWindowMessage("XPCOM_PostEvent");
/* Register the class for the event receiver window */
if (!GetClassInfo(h, _pr_eventWindowClass, &wc)) {
wc.style = 0;
wc.lpfnWndProc = _md_EventReceiverProc;
wc.cbClsExtra = 0;
wc.cbWndExtra = 0;
wc.hInstance = h;
wc.hIcon = NULL;
wc.hCursor = NULL;
wc.hbrBackground = (HBRUSH) NULL;
wc.lpszMenuName = (LPCSTR) NULL;
wc.lpszClassName = _pr_eventWindowClass;
RegisterClass(&wc);
}
/* Create the event receiver window */
eventQueue->eventReceiverWindow = CreateWindow(_pr_eventWindowClass,
"XPCOM:EventReceiver",
0, 0, 0, 10, 10,
NULL, NULL, h,
NULL);
PR_ASSERT(eventQueue->eventReceiverWindow);
/* Set a property which can be used to retrieve the event queue
* within the _md_TimerProc callback
*/
SetProp(eventQueue->eventReceiverWindow,
_md_GetEventQueuePropName(), (HANDLE)eventQueue);
return;
} /* end _md_CreateEventQueue() */
#endif /* Winxx */
#if defined(XP_OS2)
/*
** _md_CreateEventQueue() -- ModelDependent initializer
*/
static void _md_CreateEventQueue( PLEventQueue *eventQueue )
{
/* Must have HMQ for this & can't assume we already have appshell */
if( FALSE == WinQueryQueueInfo( HMQ_CURRENT, NULL, 0))
{
PPIB ppib;
PTIB ptib;
HAB hab;
HMQ hmq;
/* Set our app to be a PM app before attempting Win calls */
DosGetInfoBlocks(&ptib, &ppib);
ppib->pib_ultype = 3;
hab = WinInitialize(0);
hmq = WinCreateMsgQueue(hab, 0);
PR_ASSERT(hmq);
}
if( !_pr_PostEventMsgId)
{
WinRegisterClass( 0 /* hab_current */,
_pr_eventWindowClass,
_md_EventReceiverProc,
0, 0);
_pr_PostEventMsgId = WinAddAtom( WinQuerySystemAtomTable(),
"XPCOM_PostEvent");
}
eventQueue->eventReceiverWindow = WinCreateWindow( HWND_DESKTOP,
_pr_eventWindowClass,
"", 0,
0, 0, 0, 0,
HWND_DESKTOP,
HWND_TOP,
0,
NULL,
NULL);
PR_ASSERT(eventQueue->eventReceiverWindow);
return;
} /* end _md_CreateEventQueue() */
#endif /* XP_OS2 */
#if (defined(XP_UNIX) && !defined(XP_MACOSX)) || defined(XP_BEOS)
/*
** _md_CreateEventQueue() -- ModelDependent initializer
*/
static void _md_CreateEventQueue( PLEventQueue *eventQueue )
{
/* there's really nothing special to do here,
** the guts of the unix stuff is in the setupnativenotify
** and related functions.
*/
return;
} /* end _md_CreateEventQueue() */
#endif /* (defined(XP_UNIX) && !defined(XP_MACOSX)) || defined(XP_BEOS) */
#if defined(MAC_USE_CFRUNLOOPSOURCE)
static void _md_EventReceiverProc(void *info)
{
PLEventQueue *queue = (PLEventQueue*)info;
PL_ProcessPendingEvents(queue);
}
#elif defined(MAC_USE_CARBON_EVENT)
/*
** _md_CreateEventQueue() -- ModelDependent initializer
*/
static pascal OSStatus _md_EventReceiverProc(EventHandlerCallRef nextHandler,
EventRef inEvent,
void* userData)
{
if (GetEventClass(inEvent) == kEventClassPL &&
GetEventKind(inEvent) == kEventProcessPLEvents)
{
PREventQueue *queue;
if (GetEventParameter(inEvent, kEventParamPLEventQueue,
typeUInt32, NULL, sizeof(PREventQueue*), NULL,
&queue) == noErr)
{
PL_ProcessPendingEvents(queue);
return noErr;
}
}
return eventNotHandledErr;
}
static pascal Boolean _md_CarbonEventComparator(EventRef inEvent,
void *inCompareData)
{
Boolean match = false;
if (GetEventClass(inEvent) == kEventClassPL &&
GetEventKind(inEvent) == kEventProcessPLEvents)
{
PREventQueue *queue;
match = ((GetEventParameter(inEvent, kEventParamPLEventQueue,
typeUInt32, NULL, sizeof(PREventQueue*), NULL,
&queue) == noErr) && (queue == inCompareData));
}
return match;
}
#endif /* defined(MAC_USE_CARBON_EVENT) */
#if defined(XP_MACOSX)
static void _md_CreateEventQueue( PLEventQueue *eventQueue )
{
#if defined(MAC_USE_CFRUNLOOPSOURCE)
CFRunLoopSourceContext sourceContext = { 0 };
sourceContext.version = 0;
sourceContext.info = (void*)eventQueue;
sourceContext.perform = _md_EventReceiverProc;
/* make a run loop source */
eventQueue->mRunLoopSource = CFRunLoopSourceCreate(kCFAllocatorDefault, 0 /* order */, &sourceContext);
PR_ASSERT(eventQueue->mRunLoopSource);
eventQueue->mMainRunLoop = CFRunLoopGetCurrent();
CFRetain(eventQueue->mMainRunLoop);
/* and add it to the run loop */
CFRunLoopAddSource(eventQueue->mMainRunLoop, eventQueue->mRunLoopSource, kCFRunLoopCommonModes);
#elif defined(MAC_USE_CARBON_EVENT)
eventQueue->eventHandlerUPP = NewEventHandlerUPP(_md_EventReceiverProc);
PR_ASSERT(eventQueue->eventHandlerUPP);
if (eventQueue->eventHandlerUPP)
{
EventTypeSpec eventType;
eventType.eventClass = kEventClassPL;
eventType.eventKind = kEventProcessPLEvents;
InstallApplicationEventHandler(eventQueue->eventHandlerUPP, 1, &eventType,
eventQueue, &eventQueue->eventHandlerRef);
PR_ASSERT(eventQueue->eventHandlerRef);
}
#endif
} /* end _md_CreateEventQueue() */
#endif /* defined(XP_MACOSX) */
/* extra functions for unix */
#if defined(XP_UNIX) && !defined(XP_MACOSX)
PRInt32
PL_ProcessEventsBeforeID(PLEventQueue *aSelf, unsigned long aID)
{
PRInt32 count = 0;
PRInt32 fullCount;
if (aSelf == NULL)
return -1;
PR_EnterMonitor(aSelf->monitor);
if (aSelf->processingEvents) {
PR_ExitMonitor(aSelf->monitor);
return 0;
}
aSelf->processingEvents = PR_TRUE;
/* Only process the events that are already in the queue, and
* not any new events that get added. Do this by counting the
* number of events currently in the queue
*/
fullCount = _pl_GetEventCount(aSelf);
PR_LOG(event_lm, PR_LOG_DEBUG,
("$$$ fullCount is %d id is %ld\n", fullCount, aID));
if (fullCount == 0) {
aSelf->processingEvents = PR_FALSE;
PR_ExitMonitor(aSelf->monitor);
return 0;
}
PR_ExitMonitor(aSelf->monitor);
while (fullCount-- > 0) {
/* peek at the next event */
PLEvent *event;
event = PR_EVENT_PTR(aSelf->queue.next);
if (event == NULL)
break;
PR_LOG(event_lm, PR_LOG_DEBUG, ("$$$ processing event %ld\n",
event->id));
if (event->id >= aID) {
PR_LOG(event_lm, PR_LOG_DEBUG, ("$$$ skipping event and breaking"));
break;
}
event = PL_GetEvent(aSelf);
PL_HandleEvent(event);
PR_LOG(event_lm, PR_LOG_DEBUG, ("$$$ done processing event"));
count++;
}
PR_EnterMonitor(aSelf->monitor);
/* if full count still had items left then there's still items left
in the queue. Let the native notify token stay. */
if (aSelf->type == EventQueueIsNative) {
fullCount = _pl_GetEventCount(aSelf);
if (fullCount <= 0) {
_pl_AcknowledgeNativeNotify(aSelf);
aSelf->notified = PR_FALSE;
}
}
aSelf->processingEvents = PR_FALSE;
PR_ExitMonitor(aSelf->monitor);
return count;
}
void
PL_RegisterEventIDFunc(PLEventQueue *aSelf, PLGetEventIDFunc aFunc,
void *aClosure)
{
aSelf->idFunc = aFunc;
aSelf->idFuncClosure = aClosure;
}
void
PL_UnregisterEventIDFunc(PLEventQueue *aSelf)
{
aSelf->idFunc = 0;
aSelf->idFuncClosure = 0;
}
#endif /* defined(XP_UNIX) && !defined(XP_MACOSX) */
/* --- end plevent.c --- */
Reference in New Issue View Git Blame Copy Permalink