gecko-dev/security/coreconf/import.pl

#! /usr/local/bin/perl
#
# The contents of this file are subject to the Mozilla Public
# License Version 1.1 (the "License"); you may not use this file
# except in compliance with the License. You may obtain a copy of
# the License at http://www.mozilla.org/MPL/
# 
# Software distributed under the License is distributed on an "AS
# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
# implied. See the License for the specific language governing
# rights and limitations under the License.
# 
# The Original Code is the Netscape security libraries.
# 
# The Initial Developer of the Original Code is Netscape
# Communications Corporation.  Portions created by Netscape are 
# Copyright (C) 1994-2000 Netscape Communications Corporation.  All
# Rights Reserved.
# 
# Contributor(s):
# 
# Alternatively, the contents of this file may be used under the
# terms of the GNU General Public License Version 2 or later (the
# "GPL"), in which case the provisions of the GPL are applicable 
# instead of those above.  If you wish to allow use of your 
# version of this file only under the terms of the GPL and not to
# allow others to use your version of this file under the MPL,
# indicate your decision by deleting the provisions above and
# replace them with the notice and other provisions required by
# the GPL.  If you do not delete the provisions above, a recipient
# may use your version of this file under either the MPL or the
# GPL.
#

print STDERR "import.pl\n";

require('coreconf.pl');


$returncode =0;


#######-- read in variables on command line into %var

$var{ZIP} = "zip";
$var{UNZIP} = "unzip -o";

&parse_argv;

if (! ($var{IMPORTS} =~ /\w/)) {
    print STDERR "nothing to import\n";
}

######-- Do the import!

foreach $import (split(/ /,$var{IMPORTS}) ) {

    print STDERR "\n\nIMPORTING .... $import\n-----------------------------\n";


# if a specific version specified in IMPORT variable
# (if $import has a slash in it)

    if ($import =~ /\//) {
        # $component=everything before the first slash of $import

	$import =~ m|^([^/]*)/|; 
	$component = $1;

	$import =~ m|^(.*)/([^/]*)$|;

	# $path=everything before the last slash of $import
	$path = $1;

	# $version=everything after the last slash of $import
	$version = $2;

	if ($var{VERSION} ne "current") {
	    $version = $var{VERSION};
	}
    }
    else {
	$component = $import;
	$path = $import;
	$version = $var{VERSION};
    }

    $releasejardir = "$var{RELEASE_TREE}/$path";
    if ($version eq "current") {
	print STDERR "Current version specified. Reading 'current' file ... \n";
	
	open(CURRENT,"$releasejardir/current") || die "NO CURRENT FILE\n";
	$version = <CURRENT>;
	$version =~ s/(\r?\n)*$//; # remove any trailing [CR/]LF's
	close(CURRENT);
	print STDERR "Using version $version\n";
	if ( $version eq "") {
	    die "Current version file empty. Stopping\n";
	}
    }
    
    $releasejardir = "$releasejardir/$version";
    if ( ! -d $releasejardir) {
	die "$releasejardir doesn't exist (Invalid Version?)\n";
    }
    foreach $jarfile (split(/ /,$var{FILES})) {

	($relpath,$distpath,$options) = split(/\|/, $var{$jarfile});

	if ($var{'OVERRIDE_IMPORT_CHECK'} eq 'YES') {
	    $options =~ s/v//g;
	}

	if ( $relpath ne "") { $releasejarpathname = "$releasejardir/$relpath";}
	else { $releasejarpathname = $releasejardir; }

# If a component doesn't have IDG versions, import the DBG ones
    if( ! -e "$releasejarpathname/$jarfile" ) {
        if( $relpath =~ /IDG\.OBJ$/ ) {
            $relpath =~ s/IDG.OBJ/DBG.OBJ/;
            $releasejarpathname = "$releasejardir/$relpath";
        } elsif( $relpath =~ /IDG\.OBJD$/ ) {
            $relpath =~ s/IDG.OBJD/DBG.OBJD/;
            $releasejarpathname = "$releasejardir/$relpath";
        }
    }

	if (-e "$releasejarpathname/$jarfile") {
	    print STDERR "\nWorking on jarfile: $jarfile\n";
	    
	    if ($distpath =~ m|/$|) {
		$distpathname = "$distpath$component";
	    }
	    else {
		$distpathname = "$distpath"; 
	    }
	  
	  
#the block below is used to determine whether or not the xp headers have
#already been imported for this component

	    $doimport = 1;
	  if ($options =~ /v/) {   # if we should check the imported version
	      print STDERR "Checking if version file exists $distpathname/version\n";
	      if (-e "$distpathname/version") {
		  open( VFILE, "<$distpathname/version") ||
		      die "Cannot open $distpathname/version for reading. Permissions?\n";
		  $importversion = <VFILE>;
		  close (VFILE);
		  $importversion =~ s/\r?\n$//;   # Strip off any trailing CR/LF
		  if ($version eq $importversion) {
		      print STDERR "$distpathname version '$importversion' already imported. Skipping...\n";
		      $doimport =0;
		  }
	      }
	  }
	  
	  if ($doimport == 1) {
	      if (! -d "$distpathname") {
		  &rec_mkdir("$distpathname");
	      }
	      # delete the stuff in there already.
	      # (this should really be recursive delete.)
	      
	      if ($options =~ /v/) {
		  $remheader = "\nREMOVING files in '$distpathname/' :";
		  opendir(DIR,"$distpathname") ||
		      die ("Cannot read directory $distpathname\n");
		  @filelist = readdir(DIR);
		  closedir(DIR);
		  foreach $file ( @filelist ) {
		      if (! ($file =~ m!/.?.$!) ) {
			  if (! (-d $file)) {
			      $file =~ m!([^/]*)$!;
			      print STDERR "$remheader $1";
			      $remheader = " ";
			      unlink "$distpathname/$file";
			  }
		      }
		  }
	      }


	      print STDERR "\n\n";

	      print STDERR "\nExtracting jarfile '$jarfile' to local directory $distpathname/\n";
	      
	      print STDERR "$var{UNZIP} $releasejarpathname/$jarfile -d $distpathname\n";
	      system("$var{UNZIP} $releasejarpathname/$jarfile -d $distpathname");
	      
	      $r = $?;

	      if ($options =~ /v/) {
		  if ($r == 0) {
		      unlink ("$distpathname/version");
		      if (open(VFILE,">$distpathname/version")) {
			  print VFILE "$version\n";
			  close(VFILE);
		      }
		  }
		  else {
		      print STDERR "Could not create '$distpathname/version'. Permissions?\n";
		      $returncode ++;
		  }
	      }
	  }  # if (doimport)
	} # if (-e releasejarpathname/jarfile)
    } # foreach jarfile)
} # foreach IMPORT



exit($returncode);