gecko-dev/security/nss/lib/freebl/ecl/ecp_fp224.c
2008-06-06 08:40:11 -04:00

191 lines
6.0 KiB
C

/*
* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the elliptic curve math library for prime field curves using floating point operations.
*
* The Initial Developer of the Original Code is
* Sun Microsystems, Inc.
* Portions created by the Initial Developer are Copyright (C) 2003
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Stephen Fung <fungstep@hotmail.com>, Sun Microsystems Laboratories
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "ecp_fp.h"
#include <stdlib.h>
#define ECFP_BSIZE 224
#define ECFP_NUMDOUBLES 10
#include "ecp_fpinc.c"
/* Performs a single step of reduction, just on the uppermost float
* (assumes already tidied), and then retidies. Note, this does not
* guarantee that the result will be less than p. */
void
ecfp224_singleReduce(double *r, const EC_group_fp * group)
{
double q;
ECFP_ASSERT(group->doubleBitSize == 24);
ECFP_ASSERT(group->primeBitSize == 224);
ECFP_ASSERT(group->numDoubles == 10);
q = r[ECFP_NUMDOUBLES - 1] - ecfp_beta_224;
q += group->bitSize_alpha;
q -= group->bitSize_alpha;
r[ECFP_NUMDOUBLES - 1] -= q;
r[0] -= q * ecfp_twom224;
r[4] += q * ecfp_twom128;
ecfp_positiveTidy(r, group);
}
/*
* Performs imperfect reduction. This might leave some negative terms,
* and one more reduction might be required for the result to be between 0
* and p-1. x should be be an array of at least 20, and r at least 10 x
* and r can be the same, but then the upper parts of r are not zeroed */
void
ecfp224_reduce(double *r, double *x, const EC_group_fp * group)
{
double x10, x11, x12, x13, x14, q;
ECFP_ASSERT(group->doubleBitSize == 24);
ECFP_ASSERT(group->primeBitSize == 224);
ECFP_ASSERT(group->numDoubles == 10);
/* Tidy just the upper bits of x. Don't need to tidy the lower ones
* yet. */
ecfp_tidyUpper(x, group);
x10 = x[10] + x[16] * ecfp_twom128;
x11 = x[11] + x[17] * ecfp_twom128;
x12 = x[12] + x[18] * ecfp_twom128;
x13 = x[13] + x[19] * ecfp_twom128;
/* Tidy up, or we won't have enough bits later to add it in */
q = x10 + group->alpha[11];
q -= group->alpha[11];
x10 -= q;
x11 = x11 + q;
q = x11 + group->alpha[12];
q -= group->alpha[12];
x11 -= q;
x12 = x12 + q;
q = x12 + group->alpha[13];
q -= group->alpha[13];
x12 -= q;
x13 = x13 + q;
q = x13 + group->alpha[14];
q -= group->alpha[14];
x13 -= q;
x14 = x[14] + q;
r[9] = x[9] + x[15] * ecfp_twom128 - x[19] * ecfp_twom224;
r[8] = x[8] + x14 * ecfp_twom128 - x[18] * ecfp_twom224;
r[7] = x[7] + x13 * ecfp_twom128 - x[17] * ecfp_twom224;
r[6] = x[6] + x12 * ecfp_twom128 - x[16] * ecfp_twom224;
r[5] = x[5] + x11 * ecfp_twom128 - x[15] * ecfp_twom224;
r[4] = x[4] + x10 * ecfp_twom128 - x14 * ecfp_twom224;
r[3] = x[3] - x13 * ecfp_twom224;
r[2] = x[2] - x12 * ecfp_twom224;
r[1] = x[1] - x11 * ecfp_twom224;
r[0] = x[0] - x10 * ecfp_twom224;
/*
* Tidy up just r[ECFP_NUMDOUBLES-2] so that the number of reductions
* is accurate plus or minus one. (Rather than tidy all to make it
* totally accurate) */
q = r[ECFP_NUMDOUBLES - 2] + group->alpha[ECFP_NUMDOUBLES - 1];
q -= group->alpha[ECFP_NUMDOUBLES - 1];
r[ECFP_NUMDOUBLES - 2] -= q;
r[ECFP_NUMDOUBLES - 1] += q;
/* Tidy up the excess bits on r[ECFP_NUMDOUBLES-1] using reduction */
/* Use ecfp_beta so we get a positive res */
q = r[ECFP_NUMDOUBLES - 1] - ecfp_beta_224;
q += group->bitSize_alpha;
q -= group->bitSize_alpha;
r[ECFP_NUMDOUBLES - 1] -= q;
r[0] -= q * ecfp_twom224;
r[4] += q * ecfp_twom128;
ecfp_tidyShort(r, group);
}
/* Sets group to use optimized calculations in this file */
mp_err
ec_group_set_nistp224_fp(ECGroup *group)
{
EC_group_fp *fpg;
/* Allocate memory for floating point group data */
fpg = (EC_group_fp *) malloc(sizeof(EC_group_fp));
if (fpg == NULL) {
return MP_MEM;
}
fpg->numDoubles = ECFP_NUMDOUBLES;
fpg->primeBitSize = ECFP_BSIZE;
fpg->orderBitSize = 224;
fpg->doubleBitSize = 24;
fpg->numInts = (ECFP_BSIZE + ECL_BITS - 1) / ECL_BITS;
fpg->aIsM3 = 1;
fpg->ecfp_singleReduce = &ecfp224_singleReduce;
fpg->ecfp_reduce = &ecfp224_reduce;
fpg->ecfp_tidy = &ecfp_tidy;
fpg->pt_add_jac_aff = &ecfp224_pt_add_jac_aff;
fpg->pt_add_jac = &ecfp224_pt_add_jac;
fpg->pt_add_jm_chud = &ecfp224_pt_add_jm_chud;
fpg->pt_add_chud = &ecfp224_pt_add_chud;
fpg->pt_dbl_jac = &ecfp224_pt_dbl_jac;
fpg->pt_dbl_jm = &ecfp224_pt_dbl_jm;
fpg->pt_dbl_aff2chud = &ecfp224_pt_dbl_aff2chud;
fpg->precompute_chud = &ecfp224_precompute_chud;
fpg->precompute_jac = &ecfp224_precompute_jac;
group->point_mul = &ec_GFp_point_mul_wNAF_fp;
group->points_mul = &ec_pts_mul_basic;
group->extra1 = fpg;
group->extra_free = &ec_GFp_extra_free_fp;
ec_set_fp_precision(fpg);
fpg->bitSize_alpha = ECFP_TWO224 * fpg->alpha[0];
return MP_OKAY;
}