gecko-dev/nsprpub/configure.in

2890 lines
81 KiB
Plaintext

dnl -*- Mode: Autoconf; tab-width: 4; indent-tabs-mode: nil; -*-
dnl
dnl This Source Code Form is subject to the terms of the Mozilla Public
dnl License, v. 2.0. If a copy of the MPL was not distributed with this
dnl file, You can obtain one at http://mozilla.org/MPL/2.0/.
AC_PREREQ(2.61)
AC_INIT
AC_CONFIG_SRCDIR([pr/include/nspr.h])
AC_CONFIG_AUX_DIR(build/autoconf)
AC_CANONICAL_TARGET
dnl ========================================================
dnl = Defaults
dnl ========================================================
MOD_MAJOR_VERSION=4
MOD_MINOR_VERSION=35
MOD_PATCH_VERSION=0
NSPR_MODNAME=nspr20
_HAVE_PTHREADS=
USE_PTHREADS=
USE_USER_PTHREADS=
USE_NSPR_THREADS=
USE_N32=
USE_X32=
USE_64=
USE_CPLUS=
USE_IPV6=
USE_MDUPDATE=
_MACOSX_DEPLOYMENT_TARGET=
_OPTIMIZE_FLAGS=-O
_DEBUG_FLAGS=-g
MOZ_DEBUG=1
MOZ_OPTIMIZE=
OBJDIR='$(OBJDIR_NAME)'
OBJDIR_NAME=.
OBJDIR_SUFFIX=OBJ
NSINSTALL='$(MOD_DEPTH)/config/$(OBJDIR_NAME)/nsinstall'
NOSUCHFILE=/no-such-file
LIBNSPR='-L$(dist_libdir) -lnspr$(MOD_MAJOR_VERSION)'
LIBPLC='-L$(dist_libdir) -lplc$(MOD_MAJOR_VERSION)'
CYGWIN_WRAPPER=
MACOS_SDK_DIR=
NEXT_ROOT=
MT=
MOZ_OS2_HIGH_MEMORY=1
PROFILE_GEN_CFLAGS=
PROFILE_GEN_LDFLAGS=
PROFILE_USE_CFLAGS=
PROFILE_USE_LDFLAGS=
dnl Link in libraries necessary to resolve all symbols for shared libs
RESOLVE_LINK_SYMBOLS=
dnl ========================================================
dnl =
dnl = Dont change the following lines. Doing so breaks:
dnl =
dnl = CFLAGS="-foo" ./configure
dnl =
dnl ========================================================
CFLAGS="${CFLAGS=}"
CXXFLAGS="${CXXFLAGS=}"
LDFLAGS="${LDFLAGS=}"
DLLFLAGS="${DLLFLAGS=}"
HOST_CFLAGS="${HOST_CFLAGS=}"
HOST_LDFLAGS="${HOST_LDFLAGS=}"
case "$target" in
*-cygwin*|*-mingw*|*-msys*)
# Check to see if we are really running in a msvc environemnt
_WIN32_MSVC=
AC_CHECK_PROGS(CC, cl)
cat > conftest.c <<EOF
#ifdef _MSC_VER
COMPILER IS MSVC
#endif
EOF
read dummy <<EOF
$($CC -E conftest.c 2>/dev/null | grep COMPILER)
EOF
if test -n "$dummy"; then
_WIN32_MSVC=1
CXX=$CC
fi
rm -f conftest.c
;;
*-mks*)
_WIN32_MSVC=1
;;
esac
if test -n "$_WIN32_MSVC"; then
SKIP_PATH_CHECKS=1
SKIP_COMPILER_CHECKS=1
SKIP_LIBRARY_CHECKS=1
fi
dnl ========================================================
dnl = Android uses a very custom (hacky) toolchain; we need to do this
dnl = here, so that the compiler checks can succeed
dnl ========================================================
AC_ARG_WITH(android-ndk,
[ --with-android-ndk=DIR
location where the Android NDK can be found],
android_ndk=$withval)
AC_ARG_WITH(android-toolchain,
[ --with-android-toolchain=DIR
location of the Android toolchain],
android_toolchain=$withval)
dnl The default android_version is different for each target cpu.
case "$target_cpu" in
arm)
android_version=5
;;
i?86|mipsel)
android_version=9
;;
esac
AC_ARG_WITH(android-version,
[ --with-android-version=VER
Android platform version, default 5 for arm, 9 for x86/mips],
android_version=$withval)
AC_ARG_WITH(android-platform,
[ --with-android-platform=DIR
location of platform dir],
android_platform=$withval)
case "$target" in
x86_64-linux*-android*)
android_tool_prefix="x86_64-linux-android"
;;
aarch64-linux*-android*)
android_tool_prefix="aarch64-linux-android"
;;
arm-linux*-android*|*-linuxandroid*)
android_tool_prefix="arm-linux-androideabi"
;;
i?86-*android*)
android_tool_prefix="i686-linux-android"
;;
mipsel-*android*)
android_tool_prefix="mipsel-linux-android"
;;
*)
android_tool_prefix="$target_os"
;;
esac
case "$target" in
*-android*|*-linuxandroid*)
if test -z "$android_ndk" ; then
AC_MSG_ERROR([You must specify --with-android-ndk=/path/to/ndk when targeting Android.])
fi
if test -z "$android_toolchain" ; then
AC_MSG_CHECKING([for android toolchain directory])
kernel_name=`uname -s | tr "[[:upper:]]" "[[:lower:]]"`
case "$target_cpu" in
arm)
target_name=arm-linux-androideabi-4.4.3
;;
i?86)
target_name=x86-4.4.3
;;
mipsel)
target_name=mipsel-linux-android-4.4.3
;;
esac
android_toolchain="$android_ndk"/toolchains/$target_name/prebuilt/$kernel_name-x86
if test -d "$android_toolchain" ; then
AC_MSG_RESULT([$android_toolchain])
else
AC_MSG_ERROR([not found. You have to specify --with-android-toolchain=/path/to/ndk/toolchain.])
fi
fi
if test -z "$android_platform" ; then
AC_MSG_CHECKING([for android platform directory])
case "$target_cpu" in
arm)
target_name=arm
;;
i?86)
target_name=x86
;;
mipsel)
target_name=mips
;;
esac
android_platform="$android_ndk"/platforms/android-"$android_version"/arch-"$target_name"
if test -d "$android_platform" ; then
AC_MSG_RESULT([$android_platform])
else
AC_MSG_ERROR([not found. You have to specify --with-android-platform=/path/to/ndk/platform.])
fi
fi
dnl Old NDK support. If minimum requirement is changed to NDK r8b,
dnl please remove this.
case "$target_cpu" in
i?86)
if ! test -e "$android_toolchain"/bin/"$android_tool_prefix"-gcc; then
dnl Old NDK toolchain name
android_tool_prefix="i686-android-linux"
fi
;;
esac
dnl set up compilers
AS="$android_toolchain"/bin/"$android_tool_prefix"-as
CC="$android_toolchain"/bin/"$android_tool_prefix"-gcc
CXX="$android_toolchain"/bin/"$android_tool_prefix"-g++
CPP="$android_toolchain"/bin/"$android_tool_prefix"-cpp
LD="$android_toolchain"/bin/"$android_tool_prefix"-ld
AR="$android_toolchain"/bin/"$android_tool_prefix"-ar
RANLIB="$android_toolchain"/bin/"$android_tool_prefix"-ranlib
STRIP="$android_toolchain"/bin/"$android_tool_prefix"-strip
CPPFLAGS="-I$android_platform/usr/include $CPPFLAGS"
CFLAGS="-mandroid -I$android_platform/usr/include -fno-short-enums -fno-exceptions $CFLAGS"
CXXFLAGS="-mandroid -I$android_platform/usr/include -fpic -fno-short-enums -fno-exceptions $CXXFLAGS"
LDFLAGS="-mandroid -L$android_platform/usr/lib -Wl,-rpath-link=$android_platform/usr/lib --sysroot=$android_platform $LDFLAGS"
AC_DEFINE(ANDROID)
;;
esac
dnl ========================================================
dnl =
dnl = Check options that may affect the compiler
dnl =
dnl ========================================================
dist_prefix='${MOD_DEPTH}/dist'
dist_bindir='${dist_prefix}/bin'
dist_includedir='${dist_prefix}/include/nspr'
dist_libdir='${dist_prefix}/lib'
dnl If the --includedir option was not specified, add '/nspr' to autoconf's
dnl default value of includedir.
if test "${includedir}" = '${prefix}/include'; then
includedir='${prefix}/include/nspr'
fi
AC_ARG_WITH(dist-prefix,
[ --with-dist-prefix=DIST_PREFIX
place build files in DIST_PREFIX [dist]],
dist_prefix=$withval)
AC_ARG_WITH(dist-bindir,
[ --with-dist-bindir=DIR build execuatables in DIR [DIST_PREFIX/bin]],
dist_bindir=$withval)
AC_ARG_WITH(dist-includedir,
[ --with-dist-includedir=DIR
build include files in DIR [DIST_PREFIX/include/nspr]],
dist_includedir=$withval)
AC_ARG_WITH(dist-libdir,
[ --with-dist-libdir=DIR build library files in DIR [DIST_PREFIX/lib]],
dist_libdir=$withval)
AC_SUBST(dist_prefix)
AC_SUBST(dist_bindir)
AC_SUBST(dist_includedir)
AC_SUBST(dist_libdir)
dnl Check if NSPR is being compiled for Mozilla
dnl Let --with-arg override environment setting
dnl
AC_ARG_WITH(mozilla,
[ --with-mozilla Compile NSPR with Mozilla support],
[ if test "$withval" = "yes"; then
AC_DEFINE(MOZILLA_CLIENT)
MOZILLA_CLIENT=1
else
MOZILLA_CLIENT=
fi],
[ if test -n "$MOZILLA_CLIENT"; then
AC_DEFINE(MOZILLA_CLIENT)
fi])
AC_ARG_ENABLE(optimize,
[ --enable-optimize[=OPT] Enable code optimizations (ie. -O2) ],
[ if test "$enableval" != "no"; then
MOZ_OPTIMIZE=1
if test -n "$enableval" -a "$enableval" != "yes"; then
_OPTIMIZE_FLAGS=`echo $enableval | sed -e 's|\\\ | |g'`
_SAVE_OPTIMIZE_FLAGS=$_OPTIMIZE_FLAGS
fi
else
MOZ_OPTIMIZE=
fi ])
AC_ARG_ENABLE(debug,
[ --enable-debug[=DBG] Enable debugging (using compiler flags DBG)],
[ if test "$enableval" != "no"; then
MOZ_DEBUG=1
MOZ_DEBUG_SYMBOLS=1
if test -n "$enableval" -a "$enableval" != "yes"; then
_DEBUG_FLAGS=`echo $enableval | sed -e 's|\\\ | |g'`
_SAVE_DEBUG_FLAGS=$_DEBUG_FLAGS
fi
else
MOZ_DEBUG=
fi ],
MOZ_DEBUG_SYMBOLS=1)
AC_ARG_ENABLE(debug-symbols,
[ --enable-debug-symbols[=DBG] Enable debugging symbols
(using compiler flags DBG)],
[ if test "$enableval" != "no"; then
MOZ_DEBUG_SYMBOLS=1
if test -n "$enableval" -a "$enableval" != "yes"; then
if test -z "$_SAVE_DEBUG_FLAGS"; then
_DEBUG_FLAGS=`echo $enableval | sed -e 's|\\\ | |g'`
_SAVE_DEBUG_FLAGS=$_DEBUG_FLAGS
else
AC_MSG_ERROR([--enable-debug-symbols flags cannot be used with --enable-debug flags])
fi
fi
else
MOZ_DEBUG_SYMBOLS=
fi ])
AC_ARG_ENABLE(win32-target,
[ --enable-win32-target=\$t
Specify win32 flavor. (WIN95 or WINNT)],
OS_TARGET=`echo $enableval | tr a-z A-Z`)
AC_ARG_ENABLE(debug-rtl,
[ --enable-debug-rtl Use the MSVC debug runtime library],
[ if test "$enableval" = "yes"; then
USE_DEBUG_RTL=1
else
USE_DEBUG_RTL=0
fi ])
AC_ARG_ENABLE(static-rtl,
[ --enable-static-rtl Use the MSVC static runtime library],
[ if test "$enableval" = "yes"; then
USE_STATIC_RTL=1
fi ])
AC_ARG_ENABLE(x32,
[ --enable-x32 Enable x32 ABI support (x86_64 only)],
[ if test "$enableval" = "yes"; then
USE_X32=1
else if test "$enableval" = "no"; then
USE_X32=
fi
fi ])
AC_ARG_ENABLE(64bit,
[ --enable-64bit Enable 64-bit support (on certain platforms)],
[ if test "$enableval" = "yes"; then
USE_64=1
fi ])
AC_ARG_ENABLE(mdupdate,
[ --enable-mdupdate Enable use of certain compilers' mdupdate feature],
[ if test "$enableval" = "yes"; then
USE_MDUPDATE=1
fi ])
AC_ARG_ENABLE(cplus,
[ --enable-cplus Enable some c++ api routines],
[ if test "$enableval" = "yes"; then
USE_CPLUS=1
fi])
AC_ARG_WITH(arm-kuser,
[ --with-arm-kuser Use kuser helpers (Linux/ARM only)
(Requires kernel 2.6.13 or later)],
[ if test "$withval" = "yes"; then
AC_DEFINE(_PR_ARM_KUSER)
fi ])
dnl ========================================================
dnl = Mac OS X SDK support
dnl ========================================================
AC_ARG_WITH(macos-sdk,
[ --with-macos-sdk=dir Location of platform SDK to use (Mac OS X only)],
MACOS_SDK_DIR=$withval)
AC_ARG_ENABLE(macos-target,
[ --enable-macos-target=VER
Set the minimum MacOS version needed at runtime
[10.3 for ppc, 10.4 for x86]],
[_MACOSX_DEPLOYMENT_TARGET=$enableval])
dnl ========================================================
dnl =
dnl = Set the threading model
dnl =
dnl ========================================================
case "$target" in
*-aix*)
case "${target_os}" in
aix3.2*)
USE_NSPR_THREADS=1
;;
*)
USE_PTHREADS=1
;;
esac
;;
esac
dnl ========================================================
dnl =
dnl = Set the default C compiler
dnl =
dnl ========================================================
if test -z "$CC"; then
case "$target" in
*-aix*)
if test -z "$USE_NSPR_THREADS"; then
CC=xlc_r
else
CC=xlc
fi
;;
*-hpux*)
CC=cc
;;
*-solaris*)
CC=cc
;;
esac
fi
dnl ========================================================
dnl =
dnl = Set the default C++ compiler
dnl =
dnl ========================================================
if test -z "$CXX"; then
case "$target" in
*-aix*)
if test -z "$USE_NSPR_THREADS"; then
CXX=xlC_r
else
CXX=xlC
fi
;;
*-hpux*)
case "${target_os}" in
hpux10.30)
CXX=aCC
;;
hpux11.*)
CXX=aCC
;;
*)
CXX=CC
;;
esac
;;
*-solaris*)
CXX=CC
;;
esac
fi
if test -z "$SKIP_PATH_CHECKS"; then
AC_PATH_PROG(WHOAMI, $WHOAMI whoami, echo not_whoami)
fi
if test -n "$MOZ_DEBUG"; then
AC_DEFINE(DEBUG)
DEFINES="$DEFINES -UNDEBUG"
case "${target_os}" in
mks*|cygwin*|mingw*|msys*|os2*)
DEFINES="$DEFINES -DDEBUG_`echo ${USERNAME} | sed -e 's| |_|g'`"
;;
*)
DEFINES="$DEFINES -DDEBUG_`$WHOAMI`"
;;
esac
else
AC_DEFINE(NDEBUG)
DEFINES="$DEFINES -UDEBUG"
fi
if test -z "$SKIP_COMPILER_CHECKS"; then
dnl ========================================================
dnl Checks for compilers.
dnl ========================================================
if test "$target" != "$host"; then
echo "cross compiling from $host to $target"
cross_compiling=yes
case "$build:$target" in
powerpc-apple-darwin8*:i?86-apple-darwin*)
dnl The Darwin cross compiler doesn't necessarily point itself at a
dnl root that has libraries for the proper architecture, it defaults
dnl to the system root. The libraries in the system root on current
dnl versions of PPC OS X 10.4 aren't fat, so these target compiler
dnl checks will fail. Fake a working SDK in that case.
_SAVE_CFLAGS=$CFLAGS
_SAVE_CXXFLAGS=$CXXFLAGS
CFLAGS="-isysroot /Developer/SDKs/MacOSX10.4u.sdk $CFLAGS"
CXXFLAGS="-isysroot /Developer/SDKs/MacOSX10.4u.sdk $CXXFLAGS"
;;
esac
AC_CHECK_PROGS(CC, $CC "${target_alias}-gcc" "${target}-gcc", echo)
unset ac_cv_prog_CC
dnl Now exit the conditional block to invoke AC_PROG_CC.
fi
dnl In the latest versions of autoconf, AC_PROG_CC is a one-shot macro,
dnl declared with AC_DEFUN_ONCE. So it must not be expanded inside a
dnl conditional block. Invoke AC_PROG_CC outside any conditional block
dnl and before invoking AC_TRY_COMPILE (which requires AC_PROG_CC).
AC_PROG_CC
dnl Reenter the conditional blocks after invoking AC_PROG_CC.
if test "$target" != "$host"; then
if test -n "$USE_CPLUS"; then
AC_CHECK_PROGS(CXX, $CXX "${target_alias}-g++" "${target}-g++", echo)
unset ac_cv_prog_CXX
AC_PROG_CXX
fi
case "$build:$target" in
powerpc-apple-darwin8*:i?86-apple-darwin*|*:arm*-apple-darwin*)
dnl Revert the changes made above. From this point on, the target
dnl compiler will never be used without applying the SDK to CFLAGS
dnl (see --with-macos-sdk below).
CFLAGS=$_SAVE_CFLAGS
CXXFLAGS=$_SAVE_CXXFLAGS
;;
esac
AC_CHECK_PROGS(RANLIB, $RANLIB "${target_alias}-ranlib" "${target}-ranlib", echo)
AC_CHECK_PROGS(AR, $AR "${target_alias}-ar" "${target}-ar", echo)
AC_CHECK_PROGS(AS, $AS "${target_alias}-as" "${target}-as", echo)
AC_CHECK_PROGS(LD, $LD "${target_alias}-ld" "${target}-ld", echo)
AC_CHECK_PROGS(STRIP, $STRIP "${target_alias}-strip" "${target}-strip", echo)
AC_CHECK_PROGS(WINDRES, $WINDRES "${target_alias}-windres" "${target}-windres", echo)
_SAVE_CC="$CC"
_SAVE_CFLAGS="$CFLAGS"
_SAVE_LDFLAGS="$LDFLAGS"
AC_MSG_CHECKING([for $host compiler])
AC_CHECK_PROGS(HOST_CC, $HOST_CC gcc cc /usr/ucb/cc, "")
if test -z "$HOST_CC"; then
AC_MSG_ERROR([no acceptable cc found in \$PATH])
fi
AC_MSG_RESULT([$HOST_CC])
CC="$HOST_CC"
CFLAGS="$HOST_CFLAGS"
LDFLAGS="$HOST_LDFLAGS"
AC_MSG_CHECKING([whether the $host compiler ($HOST_CC $HOST_CFLAGS $HOST_LDFLAGS) works])
AC_TRY_COMPILE([], [return 0;],
[AC_MSG_RESULT([yes])],
[AC_MSG_ERROR([installation or configuration problem: $host compiler $HOST_CC cannot create executables.])] )
CC=$_SAVE_CC
CFLAGS=$_SAVE_CFLAGS
LDFLAGS=$_SAVE_LDFLAGS
else
if test -n "$USE_CPLUS"; then
if test "$CC" = "cl" -a -z "$CXX"; then
CXX=$CC
else
AC_PROG_CXX
fi
fi
AC_PROG_RANLIB
AC_PATH_PROGS(AS, as, $CC)
AC_PATH_PROGS(AR, ar, echo not_ar)
AC_PATH_PROGS(LD, ld link, echo not_ld)
AC_PATH_PROGS(STRIP, strip, echo not_strip)
AC_PATH_PROGS(WINDRES, windres, echo not_windres)
if test -z "$HOST_CC"; then
HOST_CC="$CC"
fi
if test -z "$HOST_CFLAGS"; then
HOST_CFLAGS="$CFLAGS"
fi
fi
AC_PROG_CPP
if test "$GCC" = "yes"; then
GNU_CC=1
fi
if test "$GXX" = "yes"; then
GNU_CXX=1
fi
if test "`echo | $AS -v 2>&1 | grep -c GNU`" != "0"; then
GNU_AS=1
fi
rm -f a.out
case "$build:$target" in
i?86-apple-darwin*:powerpc-apple-darwin*)
dnl cross_compiling will have erroneously been set to "no" in this
dnl case, because the x86 build host is able to run ppc code in a
dnl translated environment, making a cross compiler appear native.
cross_compiling=yes
;;
esac
if test "$cross_compiling" = "yes"; then
CROSS_COMPILE=1
else
CROSS_COMPILE=
fi
dnl ========================================================
dnl Check for gcc -pipe support
dnl ========================================================
AC_MSG_CHECKING([for gcc -pipe support])
if test -n "$GNU_CC" && test -n "$GNU_CXX" && test -n "$GNU_AS"; then
echo '#include <stdio.h>' > dummy-hello.c
echo 'int main() { printf("Hello World\n"); return 0; }' >> dummy-hello.c
${CC} -S dummy-hello.c -o dummy-hello.s 2>&5
cat dummy-hello.s | ${AS} -o dummy-hello.S - 2>&5
if test $? = 0; then
_res_as_stdin="yes"
else
_res_as_stdin="no"
fi
if test "$_res_as_stdin" = "yes"; then
_SAVE_CFLAGS=$CFLAGS
CFLAGS="$CFLAGS -pipe"
AC_TRY_COMPILE( [ #include <stdio.h> ],
[printf("Hello World\n");],
[_res_gcc_pipe="yes"],
[_res_gcc_pipe="no"] )
CFLAGS=$_SAVE_CFLAGS
fi
if test "$_res_as_stdin" = "yes" && test "$_res_gcc_pipe" = "yes"; then
_res="yes";
CFLAGS="$CFLAGS -pipe"
CXXFLAGS="$CXXFLAGS -pipe"
else
_res="no"
fi
rm -f dummy-hello.c dummy-hello.s dummy-hello.S dummy-hello a.out
AC_MSG_RESULT([$_res])
else
AC_MSG_RESULT([no])
fi
dnl ========================================================
dnl Check for pragma diagnostic
dnl ========================================================
AC_MSG_CHECKING([for pragma diagnostic])
if test "$GNU_CC" = "1"; then
cat >dummy-hello.c <<EOF
#ifdef _PR_HAS_PRAGMA_DIAGNOSTIC
#pragma GCC diagnostic push
#pragma GCC diagnostic ignored "-Wunused-but-set-variable"
#endif
int main() {
char *dummy = "";
return 0;
}
EOF
${CC} -Werror=unused-but-set-variable -S dummy-hello.c -o dummy-hello.s 2>&5
if test $? != 0; then
${CC} -Werror=unused-but-set-variable -D_PR_HAS_PRAGMA_DIAGNOSTIC -S dummy-hello.c -o dummy-hello.s 2>&5
if test $? = 0; then
CFLAGS="$CFLAGS -D_PR_HAS_PRAGMA_DIAGNOSTIC=1"
_res=yes
else
_res=no
fi
else
_res=no
fi
rm -f dummy-hello.c dummy-hello.s
AC_MSG_RESULT([$_res])
else
AC_MSG_RESULT([no])
fi
dnl ========================================================
dnl Profile guided optimization
dnl ========================================================
dnl Test for profiling options
dnl Under gcc 3.4+, use -fprofile-generate/-fprofile-use
_SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS -fprofile-generate -fprofile-correction"
AC_MSG_CHECKING([whether C compiler supports -fprofile-generate])
AC_TRY_COMPILE([], [return 0;],
[ PROFILE_GEN_CFLAGS="-fprofile-generate"
result="yes" ], result="no")
AC_MSG_RESULT([$result])
if test $result = "yes"; then
PROFILE_GEN_LDFLAGS="-fprofile-generate"
PROFILE_USE_CFLAGS="-fprofile-use -fprofile-correction -Wcoverage-mismatch"
PROFILE_USE_LDFLAGS="-fprofile-use"
fi
CFLAGS="$_SAVE_CFLAGS"
dnl ===============================================================
dnl Check for .hidden assembler directive and visibility attribute.
dnl Borrowed from glibc configure.in
dnl ===============================================================
if test "$GNU_CC"; then
AC_CACHE_CHECK(for visibility(hidden) attribute,
ac_cv_visibility_hidden,
[cat > conftest.c <<EOF
int foo __attribute__ ((visibility ("hidden"))) = 1;
EOF
ac_cv_visibility_hidden=no
if ${CC-cc} -Werror -S conftest.c -o conftest.s >/dev/null 2>&1; then
if grep '\.hidden.*foo' conftest.s >/dev/null; then
ac_cv_visibility_hidden=yes
fi
fi
rm -f conftest.[cs]
])
if test "$ac_cv_visibility_hidden" = "yes"; then
AC_DEFINE(HAVE_VISIBILITY_HIDDEN_ATTRIBUTE)
AC_CACHE_CHECK(for visibility pragma support,
ac_cv_visibility_pragma,
[cat > conftest.c <<EOF
#pragma GCC visibility push(hidden)
int foo_hidden = 1;
#pragma GCC visibility push(default)
int foo_default = 1;
EOF
ac_cv_visibility_pragma=no
if ${CC-cc} -Werror -S conftest.c -o conftest.s >/dev/null 2>&1; then
if grep '\.hidden.*foo_hidden' conftest.s >/dev/null; then
if ! grep '\.hidden.*foo_default' conftest.s > /dev/null; then
ac_cv_visibility_pragma=yes
fi
fi
fi
rm -f conftest.[cs]
])
if test "$ac_cv_visibility_pragma" = "yes"; then
AC_DEFINE(HAVE_VISIBILITY_PRAGMA)
# To work around a build problem on Linux x86-64 (Bugzilla bug
# 293438), we use the -fvisibility=hidden flag. This flag is less
# optimal than #pragma GCC visibility push(hidden) because the flag
# assumes that symbols defined outside the current source file have
# the default visibility. This has the advantage that we don't need
# to wrap system header files, but has the disadvantage that calls
# to hidden symbols defined in other source files cannot be
# optimized by the compiler. The -fvisibility=hidden flag does
# hide and export symbols correctly.
#VISIBILITY_FLAGS='-I$(dist_includedir)/system_wrappers -include $(topsrcdir)/config/gcc_hidden.h'
#WRAP_SYSTEM_INCLUDES=1
VISIBILITY_FLAGS="-fvisibility=hidden"
WRAP_SYSTEM_INCLUDES=
fi
fi
fi # GNU_CC
fi # SKIP_COMPILER_CHECKS
dnl ========================================================
dnl Checks for programs.
dnl ========================================================
if test -z "$SKIP_PATH_CHECKS"; then
AC_PATH_PROGS(PERL, perl5 perl, echo not_perl)
elif test -z "$PERL"; then
PERL=perl
fi
dnl ========================================================
dnl Default platform specific options
dnl ========================================================
OBJ_SUFFIX=o
LIB_SUFFIX=a
DLL_SUFFIX=so
ASM_SUFFIX=s
MKSHLIB='$(LD) $(DSO_LDOPTS) -o $@'
PR_MD_ASFILES=
PR_MD_CSRCS=
PR_MD_ARCH_DIR=unix
AR_FLAGS='cr $@'
AS='$(CC)'
ASFLAGS='$(CFLAGS)'
if test -n "$CROSS_COMPILE"; then
OS_ARCH=`echo $target_os | sed -e 's|/|_|g'`
OS_RELEASE=
OS_TEST="${target_cpu}"
case "${target_os}" in
linux*) OS_ARCH=Linux ;;
solaris*) OS_ARCH=SunOS OS_RELEASE=5 ;;
mingw*) OS_ARCH=WINNT CPU_ARCH=x86 ;;
cygwin*) OS_ARCH=WINNT ;;
darwin*) OS_ARCH=Darwin ;;
riscos*) OS_ARCH=RISCOS ;;
esac
else
OS_ARCH=`uname -s | sed -e 's|/|_|g'`
OS_RELEASE=`uname -r`
OS_TEST=`uname -m`
fi
if test "$OS_ARCH" = "AIX"; then
OS_RELEASE=`uname -v`.`uname -r`
fi
if test "$OS_ARCH" = "FreeBSD"; then
OS_RELEASE=`echo $OS_RELEASE | sed 's/-.*//'`
fi
if test "$OS_ARCH" = "Linux"; then
OS_RELEASE=`echo $OS_RELEASE | sed 's/-.*//'`
OS_RELEASE=`echo $OS_RELEASE | awk -F\. '{ print $1 "." $2 }'`
fi
#######################################################################
# Master "Core Components" macros for getting the OS target #
#######################################################################
#
# Note: OS_TARGET should be specified on the command line for gmake.
# When OS_TARGET=WIN95 is specified, then a Windows 95 target is built.
# The difference between the Win95 target and the WinNT target is that
# the WinNT target uses Windows NT specific features not available
# in Windows 95. The Win95 target will run on Windows NT, but (supposedly)
# at lesser performance (the Win95 target uses threads; the WinNT target
# uses fibers).
#
# If OS_TARGET is not specified, it defaults to $(OS_ARCH), i.e., no
# cross-compilation.
#
#
# The following hack allows one to build on a WIN95 machine (as if
# s/he were cross-compiling on a WINNT host for a WIN95 target).
# It also accomodates for MKS's uname.exe. If you never intend
# to do development on a WIN95 machine, you don't need this hack.
#
case "$OS_ARCH" in
Windows_95)
OS_ARCH=Windows_NT
OS_TARGET=WIN95
;;
Windows_98)
OS_ARCH=Windows_NT
OS_TARGET=WIN95
;;
CYGWIN_9*|CYGWIN_ME*)
OS_ARCH='CYGWIN_NT-4.0'
OS_TARGET=WIN95
;;
OS_2)
OS_ARCH=OS2
OS_TARGET=OS2
;;
esac
#
# On WIN32, we also define the variable CPU_ARCH.
#
case "$OS_ARCH" in
Windows_NT)
#
# If uname -s returns "Windows_NT", we assume that we are using
# the uname.exe in MKS toolkit.
#
# The -r option of MKS uname only returns the major version number.
# So we need to use its -v option to get the minor version number.
# Moreover, it doesn't have the -p option, so we need to use uname -m.
#
OS_ARCH=WINNT
OS_MINOR_RELEASE=`uname -v`
if test "$OS_MINOR_RELEASE" = "00"; then
OS_MINOR_RELEASE=0
fi
OS_RELEASE="${OS_RELEASE}.${OS_MINOR_RELEASE}"
CPU_ARCH=`uname -m`
#
# MKS's uname -m returns "586" on a Pentium machine.
#
if echo "$CPU_ARCH" | grep -c 86 >/dev/null; then
CPU_ARCH=x86
fi
;;
CYGWIN_NT*|MINGW*_NT*|MSYS_NT*)
#
# If uname -s returns "CYGWIN_NT-4.0", we assume that we are using
# the uname.exe in the Cygwin tools.
# If uname -s returns "MINGW32_NT-5.1", we assume that we are using
# the uname.exe in the MSYS tools.
# If uname -s returns "MSYS_NT-6.3", we assume that we are using
# the uname.exe in the MSYS2 tools.
#
OS_RELEASE=`expr $OS_ARCH : '.*NT-\(.*\)'`
OS_ARCH=WINNT
CPU_ARCH=`uname -m`
#
# Cygwin's uname -m returns "i686" on a Pentium Pro machine.
#
if echo "$CPU_ARCH" | grep -c 86 >/dev/null; then
CPU_ARCH=x86
fi
;;
esac
if test -n "$MOZILLA_CLIENT" && test "$OS_ARCH" = "WINNT"; then
OS_TARGET=WIN95
if test -n "$MOZ_DEBUG" -a -z "$USE_DEBUG_RTL"; then
USE_DEBUG_RTL=1
fi
fi
if test -z "$OS_TARGET"; then
OS_TARGET=$OS_ARCH
fi
if test "$OS_TARGET" = "WIN95"; then
OS_RELEASE="4.0"
fi
OS_CONFIG="${OS_TARGET}${OS_RELEASE}"
dnl ========================================================
dnl Enable high-memory support on OS/2 by default.
dnl ========================================================
AC_ARG_ENABLE(os2-high-mem,
[ --disable-os2-high-mem Disable high-memory support on OS/2],
[ if test "$enableval" = "no"; then
MOZ_OS2_HIGH_MEMORY=
else
MOZ_OS2_HIGH_MEMORY=1
fi ])
dnl ========================================================
dnl = ARM toolchain tweaks
dnl ========================================================
dnl Defaults
MOZ_ALIGN=toolchain-default
case "$target" in
arm*-android*|arm*-linuxandroid*)
MOZ_THUMB=yes
MOZ_ARCH=armv7-a
MOZ_FPU=vfp
MOZ_FLOAT_ABI=softfp
MOZ_SOFT_FLOAT=yes
MOZ_ALIGN=no
;;
arm*-*)
if test -n "$MOZ_PLATFORM_MAEMO"; then
MOZ_THUMB=no
MOZ_ARCH=armv7-a
MOZ_FLOAT_ABI=softfp
fi
if test "$MOZ_PLATFORM_MAEMO" = 6; then
MOZ_THUMB=yes
fi
;;
esac
dnl Kept for compatibility with some buildbot mozconfig
AC_ARG_ENABLE(thumb2, [], MOZ_THUMB=$enableval)
AC_ARG_WITH(thumb,
[ --with-thumb[[=yes|no|toolchain-default]]]
[ Use Thumb instruction set (-mthumb)],
if test -z "$GNU_CC"; then
AC_MSG_ERROR([--with-thumb is not supported on non-GNU toolchain-defaults])
fi
MOZ_THUMB=$withval)
AC_ARG_WITH(thumb-interwork,
[ --with-thumb-interwork[[=yes|no|toolchain-default]]
Use Thumb/ARM instuctions interwork (-mthumb-interwork)],
if test -z "$GNU_CC"; then
AC_MSG_ERROR([--with-thumb-interwork is not supported on non-GNU toolchain-defaults])
fi
MOZ_THUMB_INTERWORK=$withval)
AC_ARG_WITH(arch,
[ --with-arch=[[type|toolchain-default]]
Use specific CPU features (-march=type)],
if test -z "$GNU_CC"; then
AC_MSG_ERROR([--with-arch is not supported on non-GNU toolchain-defaults])
fi
MOZ_ARCH=$withval)
AC_ARG_WITH(fpu,
[ --with-fpu=[[type|toolchain-default]]
Use specific FPU type (-mfpu=type)],
if test -z "$GNU_CC"; then
AC_MSG_ERROR([--with-fpu is not supported on non-GNU toolchain-defaults])
fi
MOZ_FPU=$withval)
AC_ARG_WITH(float-abi,
[ --with-float-abi=[[type|toolchain-default]]
Use specific arm float ABI (-mfloat-abi=type)],
if test -z "$GNU_CC"; then
AC_MSG_ERROR([--with-float-abi is not supported on non-GNU toolchain-defaults])
fi
MOZ_FLOAT_ABI=$withval)
AC_ARG_WITH(soft-float,
[ --with-soft-float[[=yes|no|toolchain-default]]
Use soft float library (-msoft-float)],
if test -z "$GNU_CC"; then
AC_MSG_ERROR([--with-soft-float is not supported on non-GNU toolchain-defaults])
fi
MOZ_SOFT_FLOAT=$withval)
case "$MOZ_ARCH" in
toolchain-default|"")
arch_flag=""
;;
*)
arch_flag="-march=$MOZ_ARCH"
;;
esac
case "$MOZ_THUMB" in
yes)
MOZ_THUMB2=1
thumb_flag="-mthumb"
;;
no)
MOZ_THUMB2=
thumb_flag="-marm"
;;
*)
_SAVE_CFLAGS="$CFLAGS"
CFLAGS="$arch_flag"
AC_TRY_COMPILE([],[return sizeof(__thumb2__);],
MOZ_THUMB2=1,
MOZ_THUMB2=)
CFLAGS="$_SAVE_CFLAGS"
thumb_flag=""
;;
esac
case "$MOZ_THUMB_INTERWORK" in
yes)
thumb_interwork_flag="-mthumb-interwork"
;;
no)
thumb_interwork_flag="-mno-thumb-interwork"
;;
*) # toolchain-default
thumb_interwork_flag=""
;;
esac
case "$MOZ_FPU" in
toolchain-default|"")
fpu_flag=""
;;
*)
fpu_flag="-mfpu=$MOZ_FPU"
;;
esac
case "$MOZ_FLOAT_ABI" in
toolchain-default|"")
float_abi_flag=""
;;
*)
float_abi_flag="-mfloat-abi=$MOZ_FLOAT_ABI"
;;
esac
case "$MOZ_SOFT_FLOAT" in
yes)
soft_float_flag="-msoft-float"
;;
no)
soft_float_flag="-mno-soft-float"
;;
*) # toolchain-default
soft_float_flag=""
;;
esac
case "$MOZ_ALIGN" in
toolchain-default|"")
align_flag=""
;;
no)
align_flag="-mno-unaligned-access"
;;
yes)
align_flag="-munaligned-access"
;;
*)
align_flag=""
;;
esac
if test -n "$align_flag"; then
_SAVE_CFLAGS="$CFLAGS"
CFLAGS="$CFLAGS $align_flag"
AC_MSG_CHECKING(whether alignment flag ($align_flag) is supported)
AC_TRY_COMPILE([],[],,align_flag="")
CFLAGS="$_SAVE_CFLAGS"
fi
dnl Use echo to avoid accumulating space characters
all_flags=`echo $arch_flag $thumb_flag $thumb_interwork_flag $fpu_flag $float_abi_flag $soft_float_flag $align_flag`
if test -n "$all_flags"; then
_SAVE_CFLAGS="$CFLAGS"
CFLAGS="$all_flags"
AC_MSG_CHECKING(whether the chosen combination of compiler flags ($all_flags) works)
AC_TRY_COMPILE([],[return 0;],
AC_MSG_RESULT([yes]),
AC_MSG_ERROR([no]))
CFLAGS="$_SAVE_CFLAGS $all_flags"
CXXFLAGS="$CXXFLAGS $all_flags"
ASFLAGS="$ASFLAGS $all_flags"
if test -n "$thumb_flag"; then
LDFLAGS="$LDFLAGS $thumb_flag"
fi
fi
dnl ========================================================
dnl Override of system specific host options
dnl ========================================================
case "$host" in
*-mingw*|*-msys*)
NSINSTALL=nsinstall
;;
*-cygwin*|*-mks*)
NSINSTALL='$(CYGWIN_WRAPPER) nsinstall'
if test `echo "${PATH}" | grep -c \;` = 0; then
CYGWIN_WRAPPER='sh $(topsrcdir)/build/cygwin-wrapper'
fi
;;
*os2*)
;;
*)
HOST_CFLAGS="$HOST_CFLAGS -DXP_UNIX"
;;
esac
dnl ========================================================
dnl Override of system specific target options
dnl ========================================================
case "$target" in
*-aix*)
AC_DEFINE(XP_UNIX)
AC_DEFINE(AIX)
AC_DEFINE(SYSV)
DSO_LDOPTS='-brtl -bnortllib -bM:SRE -bnoentry -bexpall -blibpath:/usr/lib:/lib'
AC_CHECK_HEADER(sys/atomic_op.h, AC_DEFINE(AIX_HAVE_ATOMIC_OP_H))
case "${target_os}" in
aix3.2*)
AC_DEFINE(AIX_RENAME_SELECT)
AC_DEFINE(_PR_NO_LARGE_FILES)
AIX_LINK_OPTS='-bnso -berok'
PR_MD_ASFILES=os_AIX.s
;;
aix4.1*)
AC_DEFINE(AIX_TIMERS)
AC_DEFINE(_PR_NO_LARGE_FILES)
AC_DEFINE(AIX4_1)
MKSHLIB=
DSO_LDOPTS=
AIX_LINK_OPTS='-bnso -berok'
LIBNSPR='-L$(dist_libdir) -lnspr$(MOD_MAJOR_VERSION)_shr'
LIBPLC='-L$(dist_libdir) -lplc$(MOD_MAJOR_VERSION)_shr'
;;
aix4.2*)
AC_DEFINE(AIX_TIMERS)
AC_DEFINE(_PR_HAVE_OFF64_T)
AIX_LINK_OPTS='-brtl -bnso -berok'
;;
aix4.3*)
AC_DEFINE(AIX_TIMERS)
AC_DEFINE(_PR_HAVE_OFF64_T)
AC_DEFINE(AIX4_3_PLUS)
AC_DEFINE(HAVE_SOCKLEN_T)
AC_DEFINE(HAVE_FCNTL_FILE_LOCKING)
USE_IPV6=1
AIX_LINK_OPTS='-brtl -bnso -berok'
;;
*)
AC_DEFINE(AIX_TIMERS)
AC_DEFINE(_PR_HAVE_OFF64_T)
AC_DEFINE(AIX4_3_PLUS)
AC_DEFINE(HAVE_SOCKLEN_T)
AC_DEFINE(HAVE_FCNTL_FILE_LOCKING)
USE_IPV6=1
AIX_LINK_OPTS='-brtl -bnso -berok'
;;
esac
CFLAGS="$CFLAGS -qro -qroconst"
AIX_WRAP='$(DIST)/lib/aixwrap.o'
AIX_TMP='./_aix_tmp.o'
if test -n "$USE_64"; then
MDCPUCFG_H=_aix64.cfg
OBJECT_MODE=64
else
MDCPUCFG_H=_aix32.cfg
fi
PR_MD_CSRCS=aix.c
RESOLVE_LINK_SYMBOLS=1
;;
*-bsdi*)
AC_DEFINE(XP_UNIX)
AC_DEFINE(BSDI)
AC_DEFINE(NEED_BSDREGEX)
CFLAGS="$CFLAGS -Wall -Wno-format"
CXXFLAGS="$CXXFLAGS -Wall -Wno-format"
if echo "$OS_TEST" | grep -c 86 >/dev/null; then
CPU_ARCH=x86
elif echo "$OS_TEST" | grep -c sparc >/dev/null; then
CPU_ARCH=sparc
fi
MDCPUCFG_H=_bsdi.cfg
PR_MD_CSRCS=bsdi.c
DSO_LDOPTS=-r
case "$target_os" in
bsdi1.1*)
AC_DEFINE(_PR_BSDI_JMPBUF_IS_ARRAY)
AC_DEFINE(_PR_STAT_HAS_ONLY_ST_ATIME)
AC_DEFINE(_PR_NEED_H_ERRNO)
MKSHLIB=
DSO_CFLAGS=
DSO_LDOPTS=
;;
bsdi2.1*)
AC_DEFINE(_PR_TIMESPEC_HAS_TS_SEC)
AC_DEFINE(_PR_BSDI_JMPBUF_IS_ARRAY)
AC_DEFINE(HAVE_DLL)
AC_DEFINE(USE_DLFCN)
AC_DEFINE(_PR_STAT_HAS_ST_ATIMESPEC)
PR_MD_ASFILES=os_BSD_OS_386_2.s
;;
bsdi4.* | bsdi5.*)
AC_DEFINE(_PR_SELECT_CONST_TIMEVAL)
AC_DEFINE(_PR_BSDI_JMPBUF_IS_STRUCT)
AC_DEFINE(HAVE_DLL)
AC_DEFINE(USE_DLFCN)
AC_DEFINE(_PR_STAT_HAS_ST_ATIMESPEC)
MKSHLIB='$(CC) -o $@ $(DSO_LDOPTS)'
DSO_CFLAGS=-fPIC
DSO_LDOPTS='-shared -Wl,-soname,$(@:$(OBJDIR)/%.so=%.so)'
STRIP="$STRIP -d"
case "$target_os" in
bsdi4.2* | bsdi4.3* | bsdi5.*)
AC_DEFINE(_PR_HAVE_GETPROTO_R)
AC_DEFINE(_PR_HAVE_GETPROTO_R_POINTER)
;;
esac
;;
*)
AC_DEFINE(_PR_SELECT_CONST_TIMEVAL)
AC_DEFINE(_PR_BSDI_JMPBUF_IS_STRUCT)
AC_DEFINE(HAVE_DLL)
AC_DEFINE(USE_DLFCN)
AC_DEFINE(_PR_STAT_HAS_ST_ATIMESPEC)
;;
esac
;;
*-darwin*)
AC_DEFINE(XP_UNIX)
AC_DEFINE(DARWIN)
AC_DEFINE(HAVE_BSD_FLOCK)
AC_DEFINE(HAVE_SOCKLEN_T)
AC_DEFINE(HAVE_POINTER_LOCALTIME_R)
changequote(,)
HOST_DARWIN_MAJOR=`echo "$build_os" | sed -E -e 's/^darwin([0-9]+).*$/\1/'`
changequote([,])
if test "$HOST_DARWIN_MAJOR" -ge 15 ; then
AC_DEFINE(HAS_CONNECTX)
fi
AS='$(CC) -x assembler-with-cpp'
CFLAGS="$CFLAGS -Wall -fno-common"
case "${target_cpu}" in
arm*)
CPU_ARCH=arm
;;
i*86*|x86_64)
if test -n "$USE_64"; then
CPU_ARCH=x86_64
else
CPU_ARCH=i386
fi
;;
aarch64)
CPU_ARCH=aarch64
;;
*)
CPU_ARCH=ppc
;;
esac
if test "`echo $CC | grep -c '\-arch '`" = "0"; then
case "$CPU_ARCH" in
aarch64)
CC="$CC -arch arm64"
;;
*)
CC="$CC -arch $CPU_ARCH"
;;
esac
fi
AC_CHECK_HEADER(crt_externs.h, AC_DEFINE(HAVE_CRT_EXTERNS_H))
DSO_CFLAGS=-fPIC
DSO_LDOPTS='-dynamiclib -compatibility_version 1 -current_version 1 -all_load -install_name @executable_path/$@ -headerpad_max_install_names'
_OPTIMIZE_FLAGS=-O2
MKSHLIB='$(CC) $(DSO_LDOPTS) -o $@'
STRIP="$STRIP -x -S"
DLL_SUFFIX=dylib
USE_PTHREADS=1
MDCPUCFG_H=_darwin.cfg
PR_MD_CSRCS=darwin.c
PR_MD_ASFILES=os_Darwin.s
if test -n "$_MACOSX_DEPLOYMENT_TARGET" ; then
dnl Use the specified value
export MACOSX_DEPLOYMENT_TARGET=$_MACOSX_DEPLOYMENT_TARGET
elif test -z "$MACOSX_DEPLOYMENT_TARGET" ; then
dnl No value specified on the command line or in the environment,
dnl use the lesser of the library's minimum or the architecture's
dnl minimum.
case "${target_cpu}" in
powerpc*)
dnl Architecture minimum 10.3
export MACOSX_DEPLOYMENT_TARGET=10.3
;;
i*86*)
dnl Architecture minimum 10.4
export MACOSX_DEPLOYMENT_TARGET=10.4
;;
esac
fi
dnl MACOS_SDK_DIR will be set to the SDK location whenever one is
dnl in use. NEXT_ROOT will be set and exported if it's needed for
dnl ld.
if test "$MACOS_SDK_DIR"; then
dnl Sync this section with the one in Mozilla's top level.
if test ! -d "$MACOS_SDK_DIR"; then
AC_MSG_ERROR([SDK not found. When using --with-macos-sdk, you must
specify a valid SDK. SDKs are installed when the optional cross-development
tools are selected during the Xcode/Developer Tools installation.])
fi
changequote(,)
CC_VERSION=`$CC -v 2>&1 | grep 'gcc version'`
GCC_VERSION_FULL=`echo $CC_VERSION | $PERL -pe 's/^.*gcc version ([^ ]*).*/$1/'`
GCC_VERSION=`echo $GCC_VERSION_FULL | $PERL -pe '(split(/\./))[0]>=4&&s/(^\d*\.\d*).*/$1/;'`
changequote([,])
GCC_VERSION_MAJOR=`echo $GCC_VERSION_FULL | $PERL -pe 's/(^\d*).*/$1/;'`
if test "$GCC_VERSION_MAJOR" -lt "4" ; then
SDK_C_FRAMEWORK="-F${MACOS_SDK_DIR}/System/Library/Frameworks"
if test -d "${MACOS_SDK_DIR}/Library/Frameworks" ; then
SDK_C_FRAMEWORK="$SDK_C_FRAMEWORK -F${MACOS_SDK_DIR}/Library/Frameworks"
fi
SDK_C_INCLUDE="-isystem ${MACOS_SDK_DIR}/usr/include/gcc/darwin/${GCC_VERSION} -isystem ${MACOS_SDK_DIR}/usr/include ${SDK_C_FRAMEWORK}"
CFLAGS="$CFLAGS -nostdinc ${SDK_C_INCLUDE}"
dnl CPP needs to be set for AC_CHECK_HEADER.
CPP="$CPP -nostdinc ${SDK_C_INCLUDE}"
changequote(,)
HOST_DARWIN_MAJOR=`echo "$build_os" | sed -E -e 's/^darwin([0-9]+).*$/\1/'`
changequote([,])
if test "$HOST_DARWIN_MAJOR" -lt 9 ; then
dnl The build host is running Tiger (10.4) or earlier.
dnl ld support for -syslibroot is compiler-agnostic, but
dnl only available on Tiger and later. On Tiger and
dnl earlier build hosts, just rely on NEXT_ROOT, because
dnl it's not been shown to cause any problems.
MACOS_SDK_LIBS="-L${MACOS_SDK_DIR}/usr/lib/gcc/darwin -L${MACOS_SDK_DIR}/usr/lib/gcc/darwin/${GCC_VERSION_FULL} -L${MACOS_SDK_DIR}/usr/lib ${SDK_C_FRAMEWORK}"
else
dnl The build host is running Leopard (10.5) or later.
dnl With NEXT_ROOT set, the linker will still not apply
dnl it when resolving dependencies. This causes problems
dnl on Leopard, where an SDK depends on frameworks which
dnl were present in earlier OS releases (and the associated
dnl SDK) but not in Leopard. -syslibroot does not have
dnl this problem, but it results in harmless warnings when
dnl NEXT_ROOT is set. NEXT_ROOT needs to remain set even
dnl on Leopard because the compiler uses it too.
MACOS_SDK_LIBS="-Wl,-syslibroot,${MACOS_SDK_DIR}"
fi
LDFLAGS="${MACOS_SDK_LIBS} $LDFLAGS"
export NEXT_ROOT=$MACOS_SDK_DIR
if test -n "$CROSS_COMPILE" ; then
dnl NEXT_ROOT will be in the environment, but it
dnl shouldn't be set for the build host. HOST_CXX is
dnl presently unused.
HOST_CC="NEXT_ROOT= $HOST_CC"
HOST_CXX="NEXT_ROOT= $HOST_CXX"
fi
else
dnl gcc >= 4.0 uses different paths than above, but knows
dnl how to find them itself.
CFLAGS="$CFLAGS -isysroot ${MACOS_SDK_DIR}"
dnl CPP needs to be set for AC_CHECK_HEADER.
CPP="$CPP -isysroot ${MACOS_SDK_DIR}"
dnl If gcc >= 4.0.0, we're guaranteed to be on Tiger, which
dnl has an ld that supports -syslibroot. Don't set
dnl NEXT_ROOT because it will be ignored and cause
dnl warnings when -syslibroot is specified.
if test "$GCC_VERSION_FULL" != "4.0.0" ; then
dnl gcc > 4.0.0 will pass -syslibroot to ld automatically
dnl based on the -isysroot it receives.
LDFLAGS="$LDFLAGS -isysroot ${MACOS_SDK_DIR}"
else
dnl gcc 4.0.0 doesn't pass -syslibroot to ld, it needs
dnl to be explicit.
LDFLAGS="$LDFLAGS -Wl,-syslibroot,${MACOS_SDK_DIR}"
fi
fi
fi
;;
*-freebsd*)
if test -z "$USE_NSPR_THREADS"; then
USE_PTHREADS=1
fi
AC_DEFINE(XP_UNIX)
AC_DEFINE(FREEBSD)
AC_DEFINE(HAVE_BSD_FLOCK)
AC_DEFINE(HAVE_SOCKLEN_T)
AC_DEFINE(HAVE_POINTER_LOCALTIME_R)
CFLAGS="$CFLAGS $(DSO_CFLAGS) -ansi -Wall"
MOZ_OBJFORMAT=`test -x /usr/bin/objformat && /usr/bin/objformat || echo elf`
if test "$MOZ_OBJFORMAT" = "elf"; then
DLL_SUFFIX=so
else
DLL_SUFFIX=so.1.0
fi
MKSHLIB='$(CC) $(DSO_LDOPTS) -o $@'
DSO_CFLAGS=-fPIC
DSO_LDOPTS='-shared -Wl,-soname -Wl,$(notdir $@)'
MDCPUCFG_H=_freebsd.cfg
PR_MD_CSRCS=freebsd.c
;;
*-hpux*)
AC_DEFINE(XP_UNIX)
AC_DEFINE(HPUX)
AC_DEFINE(_HPUX_SOURCE)
# HPUX report the POLLHUP event for a socket when the
# shutdown(SHUT_WR) operation is called for the remote end, even though
# the socket is still writeable. Use select(), instead of poll(), to
# workaround this problem.
AC_DEFINE(_PR_POLL_WITH_SELECT)
AC_DEFINE(_USE_BIG_FDS)
DSO_LDOPTS='-b +h $(notdir $@)'
PR_MD_CSRCS=hpux.c
if test "$OS_TEST" = "ia64"; then
DLL_SUFFIX=so
DSO_LDOPTS="$DSO_LDOPTS +b '\$\$ORIGIN'"
CPU_ARCH_TAG=_$OS_TEST
if test -z "$USE_64"; then
COMPILER_TAG=_32
fi
PR_MD_ASFILES=os_HPUX_ia64.s
else
AC_DEFINE(hppa)
DLL_SUFFIX=sl
PR_MD_ASFILES=os_HPUX.s
fi
if test -n "$USE_64"; then
MDCPUCFG_H=_hpux64.cfg
else
MDCPUCFG_H=_hpux32.cfg
fi
if test -z "$GNU_CC"; then
CC="$CC -Ae"
CXX="$CXX -ext"
DSO_CFLAGS=+Z
else
DSO_CFLAGS=-fPIC
ASFLAGS="$ASFLAGS -x assembler-with-cpp"
fi
if test -n "$MOZILLA_CLIENT"; then
DEFAULT_IMPL_STRATEGY=_EMU
fi
if echo "$OS_RELEASE" | grep ^A.09 >/dev/null; then
AC_DEFINE(_PR_NEED_H_ERRNO)
AC_DEFINE(HPUX9)
DEFAULT_IMPL_STRATEGY=_EMU
USE_NSPR_THREADS=1
fi
if echo "$OS_RELEASE" | egrep '^(A.09|B.10)' >/dev/null; then
AC_DEFINE(_PR_NO_LARGE_FILES)
fi
if echo "$OS_RELEASE" | egrep '^(B.10.10|B.10.20)' >/dev/null; then
AC_DEFINE(_PR_NEED_H_ERRNO)
fi
if echo "$OS_RELEASE" | egrep '^(B.10.10|B.10.20)' >/dev/null; then
AC_DEFINE(HAVE_INT_LOCALTIME_R)
fi
if echo "$OS_RELEASE" | egrep '^(B.10.30|B.11)' >/dev/null; then
AC_DEFINE(HAVE_POINTER_LOCALTIME_R)
fi
# HP-UX 11i v2 (B.11.23) or higher
changequote(<<,>>)
case "$OS_RELEASE" in
[C-Z]*|B.[2-9]*|B.1[2-9]*|B.11.[3-9]*|B.11.2[3-9]*)
USE_IPV6=1
;;
esac
changequote([,])
if test "$OS_RELEASE" = "B.10.01"; then
AC_DEFINE(HPUX10)
DEFAULT_IMPL_STRATEGY=_EMU
fi
if test "$OS_RELEASE" = "B.10.10"; then
AC_DEFINE(HPUX10)
AC_DEFINE(HPUX10_10)
DEFAULT_IMPL_STRATEGY=_PTH
fi
if test "$OS_RELEASE" = "B.10.20"; then
AC_DEFINE(HPUX10)
AC_DEFINE(HPUX10_20)
if test -z "$GNU_CC"; then
CFLAGS="$CFLAGS +DAportable +DS1.1"
CXXFLAGS="$CXXFLAGS +DAportable +DS1.1"
fi
DEFAULT_IMPL_STRATEGY=_PTH
fi
if test "$OS_RELEASE" = "B.10.30"; then
AC_DEFINE(HPUX10)
AC_DEFINE(HPUX10_30)
if test -z "$GNU_CC"; then
CFLAGS="$CFLAGS +DAportable +DS1.1"
CXXFLAGS="$CXXFLAGS +DAportable +DS1.1"
fi
DEFAULT_IMPL_STRATEGY=_PTH
fi
if echo "$OS_RELEASE" | grep ^B.11 >/dev/null; then
AC_DEFINE(HPUX10)
AC_DEFINE(HPUX11)
AC_DEFINE(_LARGEFILE64_SOURCE)
AC_DEFINE(_PR_HAVE_OFF64_T)
AC_DEFINE(HAVE_FCNTL_FILE_LOCKING)
if test -z "$GNU_CC"; then
if test -z "$USE_64"; then
if test "$OS_TEST" = "ia64"; then
CFLAGS="$CFLAGS +DD32"
CXXFLAGS="$CXXFLAGS +DD32"
else
CFLAGS="$CFLAGS +DAportable +DS2.0"
CXXFLAGS="$CXXFLAGS +DAportable +DS2.0"
fi
else
if test "$OS_TEST" = "ia64"; then
CFLAGS="$CFLAGS +DD64"
CXXFLAGS="$CXXFLAGS +DD64"
else
CFLAGS="$CFLAGS +DA2.0W +DS2.0"
CXXFLAGS="$CXXFLAGS +DA2.0W +DS2.0"
fi
fi
fi
DEFAULT_IMPL_STRATEGY=_PTH
fi
if test "$DEFAULT_IMPL_STRATEGY" = "_EMU"; then
USE_NSPR_THREADS=1
USE_PTHREADS=
USE_USER_PTHREADS=
elif test "$DEFAULT_IMPL_STRATEGY" = "_PTH"; then
USE_PTHREADS=1
if test "$USE_NSPR_THREADS"; then
USE_PTHREADS=
fi
if test "$USE_USER_PTHREADS"; then
USE_PTHREADS=
fi
fi
;;
*-linux*|*-gnu*|*-k*bsd*-gnu|*-android*|*-linuxandroid*)
if test -z "$USE_NSPR_THREADS"; then
USE_PTHREADS=1
IMPL_STRATEGY=_PTH
fi
AC_DEFINE(XP_UNIX)
AC_DEFINE(_GNU_SOURCE)
AC_DEFINE(HAVE_FCNTL_FILE_LOCKING)
AC_DEFINE(HAVE_POINTER_LOCALTIME_R)
case "${target}" in
*-android*|*-linuxandroid*)
OS_TARGET=Android
AC_DEFINE(LINUX)
;;
*-linux*)
AC_DEFINE(LINUX)
;;
esac
CFLAGS="$CFLAGS -Wall"
CXXFLAGS="$CXXFLAGS -Wall"
MDCPUCFG_H=_linux.cfg
PR_MD_CSRCS=linux.c
MKSHLIB='$(CC) $(DSO_LDOPTS) -o $@'
DSO_CFLAGS=-fPIC
DSO_LDOPTS='-shared -Wl,-soname -Wl,$(notdir $@)'
_OPTIMIZE_FLAGS=-O2
_DEBUG_FLAGS="-g -fno-inline" # most people on linux use gcc/gdb, and that
# combo is not yet good at debugging inlined
# functions (even when using DWARF2 as the
# debugging format)
COMPILER_TAG=_glibc
if echo "$OS_TEST" | grep -c 86 >/dev/null; then
CPU_ARCH=x86
else
CPU_ARCH=$OS_TEST
fi
CPU_ARCH_TAG=_${CPU_ARCH}
case "${target_cpu}" in
alpha)
AC_DEFINE(_ALPHA_)
AC_DEFINE(__alpha)
CFLAGS="$CFLAGS -mieee"
CXXFLAGS="$CXXFLAGS -mieee"
;;
i*86)
AC_DEFINE(i386)
PR_MD_ASFILES=os_Linux_x86.s
;;
ia64)
PR_MD_ASFILES=os_Linux_ia64.s
;;
x86_64)
if test -n "$USE_64"; then
PR_MD_ASFILES=os_Linux_x86_64.s
elif test -n "$USE_X32"; then
PR_MD_ASFILES=os_Linux_x86_64.s
CC="$CC -mx32"
CXX="$CXX -mx32"
else
AC_DEFINE(i386)
PR_MD_ASFILES=os_Linux_x86.s
CC="$CC -m32"
CXX="$CXX -m32"
fi
;;
ppc|powerpc)
PR_MD_ASFILES=os_Linux_ppc.s
;;
powerpc64)
if test -n "$USE_64"; then
CC="$CC -m64"
CXX="$CXX -m64"
else
PR_MD_ASFILES=os_Linux_ppc.s
fi
;;
esac
;;
*-mingw*|*-msys*|*-cygwin*|*-mks*)
AC_DEFINE(XP_PC)
AC_DEFINE(WIN32)
PR_MD_ARCH_DIR=windows
RESOLVE_LINK_SYMBOLS=1
if test -n "$GNU_CC"; then
CC="$CC -mwindows"
CXX="$CXX -mwindows"
DLL_SUFFIX=dll
MKSHLIB='$(CC) -shared -Wl,--export-all-symbols -Wl,--out-implib -Wl,$(IMPORT_LIBRARY) $(DLLBASE) -o $(subst $(OBJDIR)/,,$(SHARED_LIBRARY))'
RC=$WINDRES
# Use temp file for windres (bug 213281)
RCFLAGS='-O coff --use-temp-file'
else
LD=link
AR='lib -NOLOGO -OUT:"$@"'
AR_FLAGS=
RANLIB='echo not_ranlib'
STRIP='echo not_strip'
RC=rc.exe
GARBAGE='$(OBJDIR)/vc20.pdb $(OBJDIR)/vc40.pdb'
OBJ_SUFFIX=obj
LIB_SUFFIX=lib
DLL_SUFFIX=dll
# Determine compiler version
changequote(,)
_MSVC_VER_FILTER='s|.* \([0-9]\+\.[0-9]\+\.[0-9]\+\(\.[0-9]\+\)\?\).*|\1|p'
changequote([,])
CC_VERSION=`${CC} -v 2>&1 | sed -ne "$_MSVC_VER_FILTER"`
if test -z "$CC_VERSION"; then
AC_MSG_ERROR([Could not determine MSC version.])
fi
_CC_MAJOR_VERSION=`echo ${CC_VERSION} | awk -F\. '{ print $1 }'`
_CC_MINOR_VERSION=`echo ${CC_VERSION} | awk -F\. '{ print $2 }'`
_CC_RELEASE=`echo ${CC_VERSION} | awk -F\. '{ print $3 }'`
_CC_BUILD=`echo ${CC_VERSION} | awk -F\. '{ print $4 }'`
MSC_VER=${_CC_MAJOR_VERSION}${_CC_MINOR_VERSION}
if test "$_CC_MAJOR_VERSION" -eq "14"; then
dnl -DYNAMICBASE is only supported on VC8SP1 or newer,
dnl so be very specific here!
dnl VC8 is 14.00.50727.42, VC8SP1 is 14.00.50727.762
if test $_CC_RELEASE -gt 50727; then
_USE_DYNAMICBASE=1
elif test $_CC_BUILD -ge 762; then
_USE_DYNAMICBASE=1
fi
AC_DEFINE(_CRT_SECURE_NO_DEPRECATE)
AC_DEFINE(_CRT_NONSTDC_NO_DEPRECATE)
elif test $_CC_MAJOR_VERSION -ge 15; then
_USE_DYNAMICBASE=1
AC_DEFINE(_CRT_SECURE_NO_WARNINGS)
AC_DEFINE(_CRT_NONSTDC_NO_WARNINGS)
fi
if test -n "$_USE_DYNAMICBASE"; then
DLLFLAGS="$DLLFLAGS -DYNAMICBASE"
fi
# Ensure that mt is Microsoft (R) Manifest Tool and not magnetic
# tape manipulation utility (or something else)
if test "$MSC_VER" -ge "1400"; then
changequote(,)
_MSMT_VER_FILTER='s|.* \([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*|\1|p'
changequote([,])
MSMT_TOOL=`mt 2>&1|grep 'Microsoft (R) Manifest Tool'`
if test -n "$MSMT_TOOL"; then
MSMANIFEST_TOOL_VERSION=`echo ${MSMT_TOOL}|sed -ne "$_MSMT_VER_FILTER"`
if test -z "$MSMANIFEST_TOOL_VERSION"; then
AC_MSG_WARN([Unknown version of the Microsoft (R) Manifest Tool.])
fi
MT=mt
unset MSMT_TOOL
else
AC_MSG_ERROR([Microsoft (R) Manifest Tool must be in your \$PATH.])
fi
fi
CFLAGS="$CFLAGS -W3 -nologo -GF -Gy"
DLLFLAGS="$DLLFLAGS -OUT:\"\$@\""
_DEBUG_FLAGS=-Zi
_OPTIMIZE_FLAGS=-O2
PROFILE_GEN_CFLAGS="-GL"
PROFILE_GEN_LDFLAGS="-LTCG:PGINSTRUMENT"
PROFILE_USE_CFLAGS="-GL -wd4624 -wd4952"
PROFILE_USE_LDFLAGS="-LTCG:PGUPDATE"
if test "$MSC_VER" -ge "1800"; then
dnl Visual C++ 2013 requires -FS when parallel building with
dnl make -jN. If not specified, compiler sometimes emits C1041
dnl error.
CFLAGS="$CFLAGS -FS"
dnl -Gw can benefit when using linker optimization on PGO.
dnl http://blogs.msdn.com/b/vcblog/archive/2013/09/11/introducing-gw-compiler-switch.aspx
PROFILE_GEN_CFLAGS="$PROFILE_GEN_CFLAGS -Gw"
PROFILE_USE_CFLAGS="$PROFILE_USE_CFLAGS -Gw"
fi
if test -z "$MOZ_OPTIMIZE"; then
CFLAGS="$CFLAGS -Od"
fi
if test "$USE_DEBUG_RTL" = 1; then
if test -n "$USE_STATIC_RTL"; then
CFLAGS="$CFLAGS -MTd"
else
CFLAGS="$CFLAGS -MDd"
fi
else
if test -n "$USE_STATIC_RTL"; then
CFLAGS="$CFLAGS -MT"
else
CFLAGS="$CFLAGS -MD"
fi
fi
if test -n "$MOZ_DEBUG"; then
AC_DEFINE(_DEBUG)
else
DEFINES="$DEFINES -U_DEBUG"
fi
if test -n "$MOZ_DEBUG_SYMBOLS"; then
if test -n "$MOZ_OPTIMIZE"; then
DLLFLAGS="$DLLFLAGS -DEBUG -OPT:REF"
LDFLAGS="$LDFLAGS -DEBUG -OPT:REF"
else
DLLFLAGS="$DLLFLAGS -DEBUG"
LDFLAGS="$LDFLAGS -DEBUG"
fi
fi
OS_DLLFLAGS="-nologo -DLL -SUBSYSTEM:WINDOWS"
if test "$MSC_VER" -le "1200" -a -z "$MOZ_DEBUG_SYMBOLS"; then
OS_DLLFLAGS="$OS_DLLFLAGS -PDB:NONE"
fi
if test "$OS_TARGET" = "WINNT"; then
CFLAGS="$CFLAGS -GT"
LIBNSPR='$(dist_libdir)/libnspr$(MOD_MAJOR_VERSION).$(LIB_SUFFIX)'
LIBPLC='$(dist_libdir)/libplc$(MOD_MAJOR_VERSION).$(LIB_SUFFIX)'
else
LIBNSPR='$(dist_libdir)/nspr$(MOD_MAJOR_VERSION).$(LIB_SUFFIX)'
LIBPLC='$(dist_libdir)/plc$(MOD_MAJOR_VERSION).$(LIB_SUFFIX)'
fi
fi # GNU_CC
if test -n "$USE_STATIC_TLS"; then
AC_DEFINE(_PR_USE_STATIC_TLS)
fi
if test "$OS_TARGET" = "WINNT"; then
AC_DEFINE(WINNT)
else
AC_DEFINE(WIN95)
# undefine WINNT as some versions of mingw gcc define it by default
DEFINES="$DEFINES -UWINNT"
AC_DEFINE(_PR_GLOBAL_THREADS_ONLY)
fi
if test "$CPU_ARCH" = "x86"; then
CPU_ARCH_TAG=
else
CPU_ARCH_TAG=$CPU_ARCH
fi
if test "$USE_DEBUG_RTL" = 1; then
OBJDIR_SUFFIX=OBJD
fi
case "$OS_TARGET" in
WINNT)
MDCPUCFG_H=_winnt.cfg
;;
WIN95)
MDCPUCFG_H=_win95.cfg
;;
*)
AC_MSG_ERROR([Missing OS_TARGET for ${target}. Use --enable-win32-target to set.])
;;
esac
case "$target_cpu" in
i*86)
if test -n "$USE_64"; then
AC_DEFINE(_AMD64_)
else
AC_DEFINE(_X86_)
if test -z "$GNU_CC" -a "$MSC_VER" -ge "1700"; then
dnl Visual C++ 2012 defaults to -arch:SSE2. Use -arch:IA32
dnl to avoid requiring SSE2.
CFLAGS="$CFLAGS -arch:IA32"
fi
fi
;;
x86_64)
AC_DEFINE(_AMD64_)
USE_64=1
;;
aarch64)
AC_DEFINE(_ARM64_)
USE_64=1
;;
ia64)
AC_DEFINE(_IA64_)
USE_64=1
;;
*)
AC_DEFINE(_CPU_ARCH_NOT_DEFINED)
;;
esac
;;
*-netbsd*)
AC_DEFINE(XP_UNIX)
AC_DEFINE(NETBSD)
AC_DEFINE(HAVE_BSD_FLOCK)
AC_DEFINE(HAVE_SOCKLEN_T)
AC_DEFINE(HAVE_POINTER_LOCALTIME_R)
if test -z "$USE_NSPR_THREADS"; then
USE_PTHREADS=1
fi
MDCPUCFG_H=_netbsd.cfg
PR_MD_CSRCS=netbsd.c
DSO_CFLAGS='-fPIC -DPIC'
CFLAGS="$CFLAGS -ansi -Wall"
CXXFLAGS="$CXXFLAGS -ansi -Wall"
MKSHLIB='$(CC) -o $@ $(DSO_LDOPTS)'
if test -z "$OBJECT_FMT"; then
if echo __ELF__ | ${CC-cc} -E - | grep -q __ELF__ 2>/dev/null; then
OBJECT_FMT=a.out
DLL_SUFFIX=so.1.0
DSO_LDOPTS='-shared'
else
OBJECT_FMT=ELF
DLL_SUFFIX=so
DSO_LDOPTS='-shared -Wl,-soname,$(notdir $@)'
fi
fi
if test "$LIBRUNPATH"; then
DSO_LDOPTS="$DSO_LDOPTS -Wl,-R$LIBRUNPATH"
fi
;;
*-nto*)
AC_DEFINE(XP_UNIX)
AC_DEFINE(NTO)
AC_DEFINE(_QNX_SOURCE)
AC_DEFINE(HAVE_POINTER_LOCALTIME_R)
MDCPUCFG_H=_nto.cfg
PR_MD_CSRCS=nto.c
MKSHLIB='$(CC) $(DSO_LDOPTS) -Wl,-soname -Wl,$(notdir $@) -o $@'
DSO_CFLAGS=-fPIC
DSO_LDOPTS=-shared
OS_LIBS="$OS_LIBS -lsocket"
_OPTIMIZE_FLAGS="-O1"
_DEBUG_FLAGS="-gstabs"
;;
*-openbsd*)
AC_DEFINE(XP_UNIX)
AC_DEFINE(OPENBSD)
AC_DEFINE(HAVE_BSD_FLOCK)
AC_DEFINE(HAVE_SOCKLEN_T)
AC_DEFINE(HAVE_POINTER_LOCALTIME_R)
CFLAGS="$CFLAGS -ansi -Wall"
CXXFLAGS="$CXXFLAGS -ansi -Wall"
DLL_SUFFIX=so.1.0
DSO_CFLAGS=-fPIC
MDCPUCFG_H=_openbsd.cfg
PR_MD_CSRCS=openbsd.c
OS_LIBS="-lc"
if test -z "$USE_NSPR_THREADS"; then
USE_PTHREADS=1
fi
DSO_LDOPTS='-shared -fPIC -Wl,-soname,$(notdir $@)'
MKSHLIB='$(CC) $(DSO_LDOPTS) -o $@'
;;
*-qnx*)
AC_DEFINE(XP_UNIX)
AC_DEFINE(QNX)
AC_DEFINE(_PR_NEED_H_ERRNO)
USE_NSPR_THREADS=1
MDCPUCFG_H=_qnx.cfg
PR_MD_CSRCS=qnx.c
;;
*-riscos*)
AC_DEFINE(XP_UNIX)
AC_DEFINE(RISCOS)
AC_DEFINE(_PR_NEED_H_ERRNO)
USE_PTHREADS=1
MDCPUCFG_H=_riscos.cfg
PR_MD_CSRCS=riscos.c
DSO_CFLAGS=-fPIC
DSO_LDOPTS='-shared -Wl,-soname -Wl,$(notdir $@)'
MKSHLIB='$(CC) $(DSO_LDOPTS) -o $@'
;;
*-*-sco*)
AC_DEFINE(XP_UNIX)
AC_DEFINE(SCO)
AC_DEFINE(sco)
AC_DEFINE(SYSV)
AC_DEFINE(_SVID3)
AC_DEFINE(_PR_NEED_H_ERRNO)
CC='cc -b elf -KPIC'
CXX='$(NSDEPTH)/build/hcpp CC +.cpp +w'
USE_NSPR_THREADS=1
CPU_ARCH=x86
DSO_LDOPTS='-b elf -G'
MDCPUCFG_H=_scoos.cfg
PR_MD_SRCS=scoos.c
;;
*-solaris*)
if test -z "$USE_NSPR_THREADS"; then
USE_PTHREADS=1
fi
AC_DEFINE(XP_UNIX)
AC_DEFINE(SVR4)
AC_DEFINE(SYSV)
AC_DEFINE(__svr4)
AC_DEFINE(__svr4__)
AC_DEFINE(SOLARIS)
AC_DEFINE(HAVE_FCNTL_FILE_LOCKING)
CPU_ARCH=`uname -p`
MDCPUCFG_H=_solaris.cfg
PR_MD_CSRCS=solaris.c
LD=/usr/ccs/bin/ld
MKSHLIB='$(CC) $(DSO_LDOPTS) -o $@'
RESOLVE_LINK_SYMBOLS=1
case "${OS_RELEASE}" in
5.8|5.9)
;;
*)
# It is safe to use the -Bdirect linker flag on Solaris 10 or later.
USE_B_DIRECT=1
;;
esac
if test -n "$GNU_CC"; then
DSO_CFLAGS=-fPIC
if `$CC -print-prog-name=ld` -v 2>&1 | grep -c GNU >/dev/null; then
GCC_USE_GNU_LD=1
fi
DSO_LDOPTS='-shared -Wl,-h,$(notdir $@),-z,combreloc,-z,defs,-z,ignore'
if test -n "$USE_B_DIRECT"; then
DSO_LDOPTS="$DSO_LDOPTS,-Bdirect"
fi
else
DSO_CFLAGS=-KPIC
DSO_LDOPTS='-G -h $(notdir $@) -z combreloc -z defs -z ignore'
if test -n "$USE_B_DIRECT"; then
DSO_LDOPTS="$DSO_LDOPTS -Bdirect"
fi
fi
if test -n "$GNU_CC"; then
CFLAGS="$CFLAGS -Wall"
CXXFLAGS="$CXXFLAGS -Wall"
if test -n "$USE_MDUPDATE"; then
CFLAGS="$CFLAGS -MDupdate \$(DEPENDENCIES)"
CXXFLAGS="$CXXFLAGS -MDupdate \$(DEPENDENCIES)"
fi
GCC_AS=`$CC -print-prog-name=as`
if test "`echo | $GCC_AS -v 2>&1 | grep -c GNU`" != "0"; then
GNU_AS=1
fi
else
CFLAGS="$CFLAGS -xstrconst"
CXXFLAGS="$CXXFLAGS -Qoption cg -xstrconst -features=tmplife"
if test -z "$MOZ_OPTIMIZE"; then
CFLAGS="$CFLAGS -xs"
CXXFLAGS="$CXXFLAGS -xs"
fi
_OPTIMIZE_FLAGS=-xO4
fi
if test -z "$GNU_AS"; then
ASFLAGS="$ASFLAGS -Wa,-P"
fi
if test -n "$USE_64"; then
if test -n "$GNU_CC"; then
CC="$CC -m64"
CXX="$CXX -m64"
else
if test "$OS_TEST" = "i86pc"; then
CC="$CC -xarch=amd64"
CXX="$CXX -xarch=amd64"
else
CC="$CC -xarch=v9"
CXX="$CXX -xarch=v9"
fi
fi
fi
if test "$OS_TEST" = "i86pc"; then
if test -z "$USE_64"; then
AC_DEFINE(i386)
fi
CPU_ARCH_TAG=_$OS_TEST
# The default debug format, DWARF (-g), is not supported by gcc
# on i386-ANY-sysv4/solaris, but the stabs format is. It is
# assumed that the Solaris assembler /usr/ccs/bin/as is used.
# If your gcc uses GNU as, you do not need the -Wa,-s option.
if test -n "$MOZ_DEBUG" && test -n "$GNU_CC"; then
_DEBUG_FLAGS=-gstabs
if test -z "$GNU_AS"; then
_DEBUG_FLAGS="$_DEBUG_FLAGS -Wa,-s"
fi
fi
fi
case "${target_os}" in
solaris2.3*)
AC_DEFINE(_PR_NO_LARGE_FILES)
;;
solaris2.4*)
AC_DEFINE(_PR_NO_LARGE_FILES)
;;
solaris2.5*)
AC_DEFINE(SOLARIS2_5)
;;
*)
AC_DEFINE(_PR_HAVE_OFF64_T)
# The lfcompile64(5) man page on Solaris 2.6 says:
# For applications that do not wish to conform to the POSIX or
# X/Open specifications, the 64-bit transitional interfaces
# are available by default. No compile-time flags need to be
# set.
# But gcc 2.7.2.x fails to define _LARGEFILE64_SOURCE by default.
# The native compiler, gcc 2.8.x, and egcs don't have this problem.
if test -n "$GNU_CC"; then
AC_DEFINE(_LARGEFILE64_SOURCE)
fi
;;
esac
case "${target_os}" in
solaris2.3*)
;;
solaris2.4*)
;;
solaris2.5*)
;;
solaris2.6*)
;;
solaris2.7*)
;;
*)
# Solaris 8 or higher has IPv6.
AC_DEFINE(_PR_INET6)
;;
esac
if test "$CPU_ARCH" = "sparc"; then
# 64-bit Solaris SPARC requires V9 architecture, so the following
# is not needed.
if test -z "$USE_64"; then
ULTRASPARC_LIBRARY=nspr_flt
fi
fi
# Purify requires that binaries linked against nspr also
# be linked against -lrt (or -lposix4) so add it to OS_LIBS
_rev=`uname -r`
_librt=`echo $_rev 5.6 | awk '{ if ($1 > $2) print "-lrt"; else print "-lposix4" }'`
OS_LIBS="$OS_LIBS $_librt"
;;
*-sco-sysv5*)
AC_DEFINE(XP_UNIX)
AC_DEFINE(UNIXWARE)
AC_DEFINE(SVR4)
AC_DEFINE(SYSV)
USE_NSPR_THREADS=1
if echo $OS_RELEASE | grep -c 2.1 2>/dev/null; then
AC_DEFINE(_PR_NO_LARGE_FILES)
CC='$(NSDEPTH)/build/hcc cc'
CXX='$(NSDEPTH)/build/hcpp CC'
MDCPUCFG_H=_unixware.cfg
else
AC_DEFINE(_LARGEFILE64_SOURCE)
AC_DEFINE(_PR_HAVE_OFF64_T)
AC_DEFINE(_PR_HAVE_SOCKADDR_LEN)
MDCPUCFG_H=_unixware7.cfg
fi
PR_MD_CSRCS=unixware.c
DSO_LDOPTS=-G
CPU_ARCH=x86
;;
*-os2*)
AC_DEFINE(XP_OS2)
AC_DEFINE(XP_PC)
AC_DEFINE(BSD_SELECT)
AC_DEFINE(TCPV40HDRS)
LIB_SUFFIX=lib
DLL_SUFFIX=dll
RC=rc.exe
PR_MD_ARCH_DIR=os2
PROG_SUFFIX=.exe
NSINSTALL=nsinstall
MDCPUCFG_H=_os2.cfg
RESOLVE_LINK_SYMBOLS=1
AC_DEFINE(OS2)
AR=emxomfar
AR_FLAGS='r $@'
CFLAGS="$CFLAGS -Wall -Zomf"
CXXFLAGS="$CFLAGS -Wall -Zomf"
MKSHLIB='$(CC) $(DSO_LDOPTS) -o $@'
DSO_CFLAGS=
DSO_LDOPTS='-Zomf -Zdll'
LDFLAGS='-Zmap'
_OPTIMIZE_FLAGS="-O2 -s"
_DEBUG_FLAGS="-g -fno-inline"
if test -n "$MOZ_OPTIMIZE"; then
DSO_LDOPTS="$DSO_LDOPTS -Zlinker /EXEPACK:2 -Zlinker /PACKCODE -Zlinker /PACKDATA"
fi
IMPLIB='emximp -o'
FILTER='emxexp -o'
if test -n "$MOZ_OS2_HIGH_MEMORY"; then
LDFLAGS="$LDFLAGS -Zhigh-mem"
AC_DEFINE(MOZ_OS2_HIGH_MEMORY)
fi
# GCC for OS/2 currently predefines these, but we don't want them
DEFINES="$DEFINES -Uunix -U__unix -U__unix__"
;;
*)
AC_DEFINE(XP_UNIX)
;;
esac
if test -z "$SKIP_LIBRARY_CHECKS"; then
dnl ========================================================
dnl Check for system libraries
dnl ========================================================
dnl We don't want anything to link with libdl even if it's present on OS X,
dnl since it's not used and not part of the default installation.
dnl The same goes for BeOS.
dnl OS/2 has dlfcn in libc.
case $target in
*-darwin*|*-os2*)
;;
*)
AC_CHECK_LIB(dl, dlopen,
[AC_CHECK_HEADER(dlfcn.h,
OS_LIBS="-ldl $OS_LIBS")])
;;
esac
dnl ========================================================
dnl Check for system header files.
dnl ========================================================
dnl ========================================================
dnl Check for typedefs and structs
dnl ========================================================
dnl ========================================================
dnl Checks for library functions.
dnl ========================================================
AC_PROG_GCC_TRADITIONAL
_SAVE_LIBS="$LIBS"
LIBS="$LIBS $OS_LIBS"
AC_CHECK_FUNCS(dladdr gettid lchown setpriority strerror syscall dnl
secure_getenv __secure_getenv)
LIBS="$_SAVE_LIBS"
dnl ========================================================
dnl Check options
dnl ========================================================
dnl ======================================================
dnl = Enable compiling with ccache
dnl ======================================================
AC_ARG_WITH(ccache,
[ --with-ccache[=path/to/ccache]
Enable compiling with ccache],
CCACHE=$withval, CCACHE="no")
if test "$CCACHE" != "no"; then
if test -n "$CCACHE"; then
if test "$CCACHE" = "yes"; then
CCACHE=
else
if test ! -e "$CCACHE"; then
AC_MSG_ERROR([$CCACHE not found])
fi
fi
fi
AC_PATH_PROGS(CCACHE, $CCACHE ccache)
if test -z "$CCACHE" -o "$CCACHE" = ":"; then
AC_MSG_ERROR([ccache not found])
elif test -x "$CCACHE"; then
CC="$CCACHE $CC"
CXX="$CCACHE $CXX"
else
AC_MSG_ERROR([$CCACHE is not executable])
fi
fi
dnl ========================================================
dnl =
dnl = --enable-strip
dnl =
dnl = Enable stripping of libs and executables
dnl =
dnl ========================================================
AC_ARG_ENABLE(strip,
[ --enable-strip Enable stripping of shared libs and programs],
[ if test "$enableval" = "yes"; then
ENABLE_STRIP=1
fi ])
dnl Check for hpux options
case "${target_os}" in
hpux*)
if test -z "$GNU_CC"; then
AC_CACHE_CHECK(for +Olit support,
ac_cv_hpux_usable_olit_option,
dnl since aCC doesn't throw an error on invalid options,
dnl we have to test this the hard way
[ac_cv_hpux_usable_olit_option=no
rm -f conftest*
echo 'int main() { return 0; }' | cat > conftest.c
${CC-cc} ${CFLAGS} +Olit=all -o conftest conftest.c > conftest.out 2>&1
if test $? -eq 0; then
if test -z "`egrep -i '(unrecognize|unknown)' conftest.out`"; then
ac_cv_hpux_usable_olit_option=yes
fi
fi
rm -f conftest*
])
if test "$ac_cv_hpux_usable_olit_option" = "yes"; then
CFLAGS="$CFLAGS +Olit=all"
CXXFLAGS="$CXXFLAGS +Olit=all"
else
CFLAGS="$CFLAGS +ESlit"
CXXFLAGS="$CXXFLAGS +ESlit"
fi
fi
;;
esac
case "$target_os" in
darwin*)
_HAVE_PTHREADS=1
;;
*)
AC_CHECK_LIB(pthreads, pthread_create,
_HAVE_PTHREADS=1 _PTHREAD_LDFLAGS="-lpthreads",
AC_CHECK_LIB(pthread, pthread_create,
_HAVE_PTHREADS=1 _PTHREAD_LDFLAGS="-lpthread",
AC_CHECK_LIB(c_r, pthread_create,
_HAVE_PTHREADS=1 _PTHREAD_LDFLAGS="-lc_r",
AC_CHECK_LIB(c, pthread_create,
_HAVE_PTHREADS=1
)
)
)
)
;;
esac
AC_ARG_WITH(pthreads,
[ --with-pthreads Use system pthreads library as thread subsystem],
[ if test "$withval" = "yes"; then
if test -n "$_HAVE_PTHREADS"; then
USE_PTHREADS=1
USE_USER_PTHREADS=
USE_NSPR_THREADS=
else
AC_MSG_ERROR([ --with-pthreads specified for a system without pthread support ]);
fi
else
USE_PTHREADS=
_PTHREAD_LDFLAGS=
fi],
[ if test -n "$_HAVE_PTHREADS" && test -z "$USE_USER_PTHREADS" && test -z "$USE_NSPR_THREADS"; then
USE_PTHREADS=1
USE_USER_PTHREADS=
USE_NSPR_THREADS=
fi])
AC_ARG_ENABLE(user-pthreads,
[ --enable-user-pthreads Build using userland pthreads],
[ if test "$enableval" = "yes"; then
if test -n "$_HAVE_PTHREADS"; then
USE_PTHREADS=
USE_USER_PTHREADS=1
USE_NSPR_THREADS=
else
AC_MSG_ERROR([ --enable-user-pthreads specified for a system without pthread support ]);
fi
fi])
AC_ARG_ENABLE(nspr-threads,
[ --enable-nspr-threads Build using classic nspr threads],
[ if test "$enableval" = "yes"; then
USE_PTHREADS=
USE_USER_PTHREADS=
USE_NSPR_THREADS=1
fi])
fi # SKIP_LIBRARY_CHECKS
AC_ARG_ENABLE(ipv6,
[ --enable-ipv6 Compile ipv6 support],
[ if test "$enableval" = "yes"; then
USE_IPV6=1
else
USE_IPV6=
fi])
if test -n "$USE_PTHREADS"; then
dnl See if -pthread is supported.
rm -f conftest*
ac_cv_have_dash_pthread=no
AC_MSG_CHECKING(whether ${CC-cc} accepts -pthread)
echo 'int main() { return 0; }' | cat > conftest.c
${CC-cc} -pthread -o conftest conftest.c > conftest.out 2>&1
if test $? -eq 0; then
if test -z "`egrep -i '(unrecognize|unknown)' conftest.out | grep pthread`" && test -z "`egrep -i '(error|incorrect)' conftest.out`" ; then
ac_cv_have_dash_pthread=yes
case "$target_os" in
freebsd*)
# Freebsd doesn't use -pthread for compiles, it uses them for linking
;;
*)
CFLAGS="$CFLAGS -pthread"
CXXFLAGS="$CXXFLAGS -pthread"
;;
esac
fi
fi
rm -f conftest*
AC_MSG_RESULT($ac_cv_have_dash_pthread)
dnl
dnl See if -pthreads is supported.
dnl
ac_cv_have_dash_pthreads=no
if test "$ac_cv_have_dash_pthread" = "no"; then
AC_MSG_CHECKING(whether ${CC-cc} accepts -pthreads)
echo 'int main() { return 0; }' | cat > conftest.c
${CC-cc} -pthreads -o conftest conftest.c > conftest.out 2>&1
if test $? -eq 0; then
if test -z "`egrep -i '(unrecognize|unknown)' conftest.out | grep pthreads`" && test -z "`egrep -i '(error|incorrect)' conftest.out`" ; then
ac_cv_have_dash_pthreads=yes
CFLAGS="$CFLAGS -pthreads"
CXXFLAGS="$CXXFLAGS -pthreads"
fi
fi
rm -f conftest*
AC_MSG_RESULT($ac_cv_have_dash_pthreads)
fi
case "$target" in
*-solaris*)
if test "$ac_cv_have_dash_pthreads" = "yes"; then
_PTHREAD_LDFLAGS=
fi
;;
*-freebsd*)
AC_DEFINE(_REENTRANT)
AC_DEFINE(_THREAD_SAFE)
dnl -pthread links in -lc_r, so don't specify it explicitly.
if test "$ac_cv_have_dash_pthread" = "yes"; then
_PTHREAD_LDFLAGS="-pthread"
else
_PTHREAD_LDFLAGS="-lc_r"
fi
;;
*-netbsd*)
if test "$ac_cv_have_dash_pthread" = "yes"; then
_PTHREAD_LDFLAGS="-pthread"
fi
;;
*-bsdi*)
AC_DEFINE(_THREAD_SAFE)
dnl -pthread links in -lc_r, so don't specify it explicitly.
if test "$ac_cv_have_dash_pthread" = "yes"; then
_PTHREAD_LDFLAGS=
fi
;;
*-openbsd*)
if test "$ac_cv_have_dash_pthread" = "yes"; then
_PTHREAD_LDFLAGS=-pthread
fi
;;
*-linux*|*-gnu*|*-k*bsd*-gnu)
AC_DEFINE(_REENTRANT)
;;
esac
else
if test -n "$USE_USER_PTHREADS"; then
USE_PTHREADS=
USE_NSPR_THREADS=
else
_PTHREAD_LDFLAGS=
fi
fi
dnl Special thread exceptions
case "$target" in
*-aix*)
if test -n "$USE_NSPR_THREADS"; then
AC_DEFINE(_PR_LOCAL_THREADS_ONLY)
fi
case "$target_os" in
aix4.1*)
if test -z "$USE_PTHREADS"; then
AC_DEFINE(AIX_RENAME_SELECT)
fi
;;
aix4.2*)
if test -z "$USE_NSPR_THREADS"; then
AC_DEFINE(HAVE_POINTER_LOCALTIME_R)
fi
;;
aix4.3*)
if test -z "$USE_NSPR_THREADS"; then
AC_DEFINE(HAVE_POINTER_LOCALTIME_R)
fi
if test -n "$USE_PTHREADS"; then
AC_DEFINE(_PR_HAVE_THREADSAFE_GETHOST)
fi
;;
*)
if test -z "$USE_NSPR_THREADS"; then
AC_DEFINE(HAVE_POINTER_LOCALTIME_R)
fi
if test -n "$USE_PTHREADS"; then
AC_DEFINE(_PR_HAVE_THREADSAFE_GETHOST)
fi
;;
esac
;;
*-bsdi*)
if test -n "$USE_PTHREADS"; then
AC_DEFINE(_PR_NEED_PTHREAD_INIT)
fi
;;
*-freebsd*)
if test -n "$USE_NSPR_THREADS"; then
AC_DEFINE(_PR_LOCAL_THREADS_ONLY)
fi
;;
*-hpux*)
if test -n "$USE_NSPR_THREADS"; then
AC_DEFINE(_PR_LOCAL_THREADS_ONLY)
fi
if test "$USE_PTHREADS"; then
AC_DEFINE_UNQUOTED(_POSIX_C_SOURCE,199506L)
AC_DEFINE(_PR_HAVE_THREADSAFE_GETHOST)
fi
if test "$USE_USER_PTHREADS"; then
AC_DEFINE_UNQUOTED(_POSIX_C_SOURCE,199506L)
fi
;;
*-linux*|*-gnu*|*-k*bsd*-gnu)
if test -n "$USE_NSPR_THREADS"; then
AC_DEFINE(_PR_LOCAL_THREADS_ONLY)
fi
;;
*-mingw*|*-msys*|*-cygwin*|*-mks*|*-os2*)
dnl win32, os2 cannot use pthreads
USE_PTHREADS=
_PTHREAD_LDFLAGS=
USE_USER_PTHREADS=
;;
*-netbsd*|*-openbsd*)
if test -n "$USE_NSPR_THREADS"; then
AC_DEFINE(_PR_LOCAL_THREADS_ONLY)
fi
;;
*-solaris*)
if test -n "$USE_NSPR_THREADS"; then
AC_DEFINE(_PR_LOCAL_THREADS_ONLY)
fi
if test -n "$USE_PTHREADS"; then
AC_DEFINE(_REENTRANT)
AC_DEFINE(HAVE_POINTER_LOCALTIME_R)
if test "$OS_TEST" = "i86pc"; then
if test -n "$USE_64"; then
PR_MD_ASFILES=os_SunOS_x86_64.s
else
PR_MD_ASFILES=os_SunOS_x86.s
fi
else
if test -n "$USE_64"; then
PR_MD_ASFILES=os_SunOS_sparcv9.s
fi
fi
fi
;;
*-nto*)
if test -n "$USE_PTHREADS"; then
AC_DEFINE(_PR_HAVE_GETHOST_R)
AC_DEFINE(_PR_HAVE_GETHOST_R_POINTER)
fi
;;
esac
OS_LIBS="$_PTHREAD_LDFLAGS $OS_LIBS"
dnl If the user passed in arg to --enable-optimize or --enable-debug,
dnl make sure that we use it.
if test -n "$_SAVE_OPTIMIZE_FLAGS"; then
_OPTIMIZE_FLAGS="$_SAVE_OPTIMIZE_FLAGS"
fi
if test -n "$_SAVE_DEBUG_FLAGS"; then
_DEBUG_FLAGS="$_SAVE_DEBUG_FLAGS"
fi
if test -n "$MOZ_OPTIMIZE"; then
CFLAGS="$CFLAGS $_OPTIMIZE_FLAGS"
CXXFLAGS="$CXXFLAGS $_OPTIMIZE_FLAGS"
fi
if test -n "$MOZ_DEBUG_SYMBOLS"; then
CFLAGS="$CFLAGS $_DEBUG_FLAGS"
CXXFLAGS="$CXXFLAGS $_DEBUG_FLAGS"
fi
if test -n "$MOZ_OPTIMIZE"; then
OBJDIR_TAG=_OPT
else
OBJDIR_TAG=_DBG
fi
if test -n "$USE_64"; then
COMPILER_TAG=_64
fi
RELEASE_OBJDIR_NAME="${OS_CONFIG}${CPU_ARCH_TAG}${COMPILER_TAG}${IMPL_STRATEGY}${OBJDIR_TAG}.${OBJDIR_SUFFIX}"
dnl ========================================================
dnl Use cygwin wrapper for win32 builds, except MSYS/MinGW
dnl ========================================================
case "$target_os" in
cygwin*|mks*)
CC="\$(CYGWIN_WRAPPER) $CC"
CXX="\$(CYGWIN_WRAPPER) $CXX"
RC="\$(CYGWIN_WRAPPER) $RC"
;;
esac
dnl ========================================================
dnl = Use malloc wrapper lib
dnl ========================================================
AC_ARG_ENABLE(wrap-malloc,
[ --enable-wrap-malloc Wrap malloc calls (gnu linker only)],
[ if test "$enableval" = "yes"; then
_WRAP_MALLOC=1
fi ])
if test -n "$_WRAP_MALLOC"; then
if test -n "$GNU_CC"; then
WRAP_LDFLAGS="${WRAP_LDFLAGS} -Wl,--wrap=malloc,--wrap=calloc,--wrap=valloc,--wrap=free,--wrap=realloc,--wrap=memalign"
WRAP_LDFLAGS="${WRAP_LDFLAGS} -Wl,--wrap=__builtin_new,--wrap=__builtin_vec_new,--wrap=__builtin_delete,--wrap=__builtin_vec_delete"
WRAP_LDFLAGS="${WRAP_LDFLAGS} -Wl,--wrap=strdup,--wrap=strndup"
WRAP_LDFLAGS="${WRAP_LDFLAGS} -Wl,--wrap=posix_memalign,--wrap=malloc_usable_size"
else
AC_MSG_ERROR([--enable-wrap-malloc is not supported for non-GNU toolchains])
fi
fi
dnl ========================================================
dnl = Location of malloc wrapper lib
dnl ========================================================
AC_ARG_WITH(wrap-malloc,
[ --with-wrap-malloc=SHAREDLIB Location of malloc wrapper library],
WRAP_LDFLAGS="${WRAP_LDFLAGS} $withval")
dnl ========================================================
dnl Substitution of found variables.
dnl ========================================================
AC_SUBST(SHELL_OVERRIDE)
AC_SUBST(MOZILLA_CLIENT)
AC_SUBST(CC)
AC_SUBST(CXX)
AC_SUBST(CFLAGS)
AC_SUBST(CXXFLAGS)
AC_SUBST(CPPFLAGS)
AC_SUBST(HOST_CC)
AC_SUBST(HOST_CFLAGS)
AC_SUBST(LDFLAGS)
AC_SUBST(HOST_LDFLAGS)
AC_SUBST(GNU_CC)
AC_SUBST(GCC_USE_GNU_LD)
AC_SUBST(MSC_VER)
AC_SUBST(CROSS_COMPILE)
AC_SUBST(MOZ_OPTIMIZE)
AC_SUBST(MOZ_DEBUG)
AC_SUBST(MOZ_DEBUG_SYMBOLS)
AC_SUBST(USE_CPLUS)
AC_SUBST(USE_IPV6)
AC_SUBST(USE_N32)
AC_SUBST(USE_X32)
AC_SUBST(USE_64)
AC_SUBST(OBJECT_MODE)
AC_SUBST(ENABLE_STRIP)
AC_SUBST(USE_PTHREADS)
AC_SUBST(USE_BTHREADS)
AC_SUBST(USE_USER_PTHREADS)
AC_SUBST(USE_NSPR_THREADS)
AC_SUBST(LIBNSPR)
AC_SUBST(LIBPLC)
AC_SUBST(MOD_MAJOR_VERSION)
AC_SUBST(MOD_MINOR_VERSION)
AC_SUBST(MOD_PATCH_VERSION)
AC_SUBST(NSPR_MODNAME)
AC_SUBST(MDCPUCFG_H)
AC_SUBST(PR_MD_CSRCS)
AC_SUBST(PR_MD_ASFILES)
AC_SUBST(PR_MD_ARCH_DIR)
AC_SUBST(CPU_ARCH)
AC_SUBST(OBJ_SUFFIX)
AC_SUBST(LIB_SUFFIX)
AC_SUBST(DLL_SUFFIX)
AC_SUBST(ASM_SUFFIX)
AC_SUBST(WRAP_LDFLAGS)
AC_SUBST(MKSHLIB)
AC_SUBST(DSO_CFLAGS)
AC_SUBST(DSO_LDOPTS)
AC_SUBST(OS_TARGET)
AC_SUBST(OS_ARCH)
AC_SUBST(OS_RELEASE)
AC_SUBST(OS_TEST)
AC_SUBST(MACOSX_DEPLOYMENT_TARGET)
AC_SUBST(DEFINES)
AC_SUBST(DEFS)
AC_SUBST(AR)
AC_SUBST(AR_FLAGS)
AC_SUBST(AS)
AC_SUBST(ASFLAGS)
AC_SUBST(LD)
AC_SUBST(RANLIB)
AC_SUBST(PERL)
AC_SUBST(STRIP)
AC_SUBST(FILTER)
AC_SUBST(IMPLIB)
AC_SUBST(PROFILE_GEN_CFLAGS)
AC_SUBST(PROFILE_GEN_LDFLAGS)
AC_SUBST(PROFILE_USE_CFLAGS)
AC_SUBST(PROFILE_USE_LDFLAGS)
AC_SUBST(OS_LIBS)
AC_SUBST(RESOLVE_LINK_SYMBOLS)
AC_SUBST(AIX_LINK_OPTS)
AC_SUBST(NOSUCHFILE)
AC_SUBST(MOZ_OBJFORMAT)
AC_SUBST(ULTRASPARC_LIBRARY)
AC_SUBST(OBJDIR)
AC_SUBST(OBJDIR_NAME)
AC_SUBST(RELEASE_OBJDIR_NAME)
AC_SUBST(NSINSTALL)
AC_SUBST(OPTIMIZER)
AC_SUBST(RC)
AC_SUBST(RCFLAGS)
AC_SUBST(DLLFLAGS)
AC_SUBST(EXEFLAGS)
AC_SUBST(OS_DLLFLAGS)
AC_SUBST(CYGWIN_WRAPPER)
AC_SUBST(VISIBILITY_FLAGS)
AC_SUBST(WRAP_SYSTEM_INCLUDES)
AC_SUBST(MACOS_SDK_DIR)
AC_SUBST(NEXT_ROOT)
AC_SUBST(MT)
dnl ========================================================
dnl Generate output files.
dnl ========================================================
MAKEFILES="
Makefile
config/Makefile
config/autoconf.mk
config/nsprincl.mk
config/nsprincl.sh
config/nspr-config
config/nspr.pc
lib/Makefile
lib/ds/Makefile
lib/libc/Makefile
lib/libc/include/Makefile
lib/libc/src/Makefile
lib/tests/Makefile
pkg/Makefile
pr/Makefile
pr/include/Makefile
pr/include/md/Makefile
pr/include/obsolete/Makefile
pr/include/private/Makefile
pr/src/Makefile
pr/src/io/Makefile
pr/src/linking/Makefile
pr/src/malloc/Makefile
pr/src/md/Makefile
pr/src/md/${PR_MD_ARCH_DIR}/Makefile
pr/src/memory/Makefile
pr/src/misc/Makefile
pr/src/threads/Makefile
pr/tests/Makefile
pr/tests/dll/Makefile
"
if test "$OS_TARGET" = "Linux"; then
MAKEFILES="$MAKEFILES
pkg/linux/Makefile
"
elif test "$OS_TARGET" = "SunOS"; then
MAKEFILES="$MAKEFILES
pkg/solaris/Makefile
pkg/solaris/SUNWpr/Makefile
pkg/solaris/SUNWprd/Makefile
"
fi
if test -z "$USE_PTHREADS" && test -z "$USE_BTHREADS"; then
MAKEFILES="$MAKEFILES
pr/src/threads/combined/Makefile
"
elif test -n "$USE_PTHREADS"; then
MAKEFILES="$MAKEFILES
pr/src/pthreads/Makefile
"
elif test -n "$USE_BTHREADS"; then
MAKEFILES="$MAKEFILES
pr/src/bthreads/Makefile
"
fi
if test -n "$USE_CPLUS"; then
MAKEFILES="$MAKEFILES
pr/src/cplus/Makefile
pr/src/cplus/tests/Makefile
"
fi
echo $MAKEFILES > unallmakefiles
AC_CONFIG_FILES([$MAKEFILES])
AC_CONFIG_COMMANDS([default], [chmod +x config/nspr-config])
AC_OUTPUT