gecko-dev/image/DecoderFactory.h
Andrew Osmond c35d734095 Bug 1389988 - Handle a data race between a new sync decode request and a pending decoder. r=tnikkel
If there is an active provider which has yet to produce a frame, any
calls to SurfaceCache::Lookup will return MatchType::PENDING. If
RasterImage::Lookup gets the above result while given FLAG_SYNC_DECODE,
it will attempt to start a new decoder. It is entirely possible that
when we try to insert the new provider into the SurfaceCache, it cannot
because the original provider finally did produce something. In that
case we should abandon attempting to redecode and retry our lookup.
2018-02-09 08:51:28 -05:00

207 lines
8.6 KiB
C++

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
*
* This Source Code Form is subject to the terms of the Mozilla Public
* License, v. 2.0. If a copy of the MPL was not distributed with this
* file, You can obtain one at http://mozilla.org/MPL/2.0/. */
#ifndef mozilla_image_DecoderFactory_h
#define mozilla_image_DecoderFactory_h
#include "DecoderFlags.h"
#include "mozilla/Attributes.h"
#include "mozilla/Maybe.h"
#include "mozilla/NotNull.h"
#include "mozilla/gfx/2D.h"
#include "nsCOMPtr.h"
#include "SurfaceFlags.h"
namespace mozilla {
namespace image {
class Decoder;
class IDecodingTask;
class nsICODecoder;
class RasterImage;
class SourceBuffer;
class SourceBufferIterator;
/**
* The type of decoder; this is usually determined from a MIME type using
* DecoderFactory::GetDecoderType().
*/
enum class DecoderType
{
PNG,
GIF,
JPEG,
BMP,
ICO,
ICON,
UNKNOWN
};
class DecoderFactory
{
public:
/// @return the type of decoder which is appropriate for @aMimeType.
static DecoderType GetDecoderType(const char* aMimeType);
/**
* Creates and initializes a decoder for non-animated images of type @aType.
* (If the image *is* animated, only the first frame will be decoded.) The
* decoder will send notifications to @aImage.
*
* @param aType Which type of decoder to create - JPEG, PNG, etc.
* @param aImage The image will own the decoder and which should receive
* notifications as decoding progresses.
* @param aSourceBuffer The SourceBuffer which the decoder will read its data
* from.
* @param aIntrinsicSize The intrinsic size of the image, normally obtained
* during the metadata decode.
* @param aOutputSize The output size for the decoder. If this is smaller than
* the intrinsic size, the decoder will downscale the
* image.
* @param aDecoderFlags Flags specifying the behavior of this decoder.
* @param aSurfaceFlags Flags specifying the type of output this decoder
* should produce.
* @param aOutTask Task representing the decoder.
* @return NS_OK if the decoder has been created/initialized successfully;
* NS_ERROR_ALREADY_INITIALIZED if there is already an active decoder
* for this image;
* Else some other unrecoverable error occurred.
*/
static nsresult
CreateDecoder(DecoderType aType,
NotNull<RasterImage*> aImage,
NotNull<SourceBuffer*> aSourceBuffer,
const gfx::IntSize& aIntrinsicSize,
const gfx::IntSize& aOutputSize,
DecoderFlags aDecoderFlags,
SurfaceFlags aSurfaceFlags,
IDecodingTask** aOutTask);
/**
* Creates and initializes a decoder for animated images of type @aType.
* The decoder will send notifications to @aImage.
*
* @param aType Which type of decoder to create - JPEG, PNG, etc.
* @param aImage The image will own the decoder and which should receive
* notifications as decoding progresses.
* @param aSourceBuffer The SourceBuffer which the decoder will read its data
* from.
* @param aIntrinsicSize The intrinsic size of the image, normally obtained
* during the metadata decode.
* @param aDecoderFlags Flags specifying the behavior of this decoder.
* @param aSurfaceFlags Flags specifying the type of output this decoder
* should produce.
* @param aOutTask Task representing the decoder.
* @return NS_OK if the decoder has been created/initialized successfully;
* NS_ERROR_ALREADY_INITIALIZED if there is already an active decoder
* for this image;
* Else some other unrecoverable error occurred.
*/
static nsresult
CreateAnimationDecoder(DecoderType aType,
NotNull<RasterImage*> aImage,
NotNull<SourceBuffer*> aSourceBuffer,
const gfx::IntSize& aIntrinsicSize,
DecoderFlags aDecoderFlags,
SurfaceFlags aSurfaceFlags,
IDecodingTask** aOutTask);
/**
* Creates and initializes a metadata decoder of type @aType. This decoder
* will only decode the image's header, extracting metadata like the size of
* the image. No actual image data will be decoded and no surfaces will be
* allocated. The decoder will send notifications to @aImage.
*
* @param aType Which type of decoder to create - JPEG, PNG, etc.
* @param aImage The image will own the decoder and which should receive
* notifications as decoding progresses.
* @param aSourceBuffer The SourceBuffer which the decoder will read its data
* from.
*/
static already_AddRefed<IDecodingTask>
CreateMetadataDecoder(DecoderType aType,
NotNull<RasterImage*> aImage,
NotNull<SourceBuffer*> aSourceBuffer);
/**
* Creates and initializes a decoder for an ICO resource, which may be either
* a BMP or PNG image.
*
* @param aType Which type of decoder to create. This must be either BMP or
* PNG.
* @param aIterator The SourceBufferIterator which the decoder will read its
* data from.
* @param aICODecoder The ICO decoder which is controlling this resource
* decoder. @aICODecoder's settings will be copied to the
* resource decoder, so the two decoders will have the
* same decoder flags, surface flags, target size, and
* other parameters.
* @param aIsMetadataDecode Indicates whether or not this decoder is for
* metadata or not. Independent of the state of the
* parent decoder.
* @param aExpectedSize The expected size of the resource from the ICO header.
* @param aDataOffset If @aType is BMP, specifies the offset at which data
* begins in the BMP resource. Must be Some() if and only
* if @aType is BMP.
*/
static already_AddRefed<Decoder>
CreateDecoderForICOResource(DecoderType aType,
SourceBufferIterator&& aIterator,
NotNull<nsICODecoder*> aICODecoder,
bool aIsMetadataDecode,
const Maybe<gfx::IntSize>& aExpectedSize,
const Maybe<uint32_t>& aDataOffset = Nothing());
/**
* Creates and initializes an anonymous decoder (one which isn't associated
* with an Image object). Only the first frame of the image will be decoded.
*
* @param aType Which type of decoder to create - JPEG, PNG, etc.
* @param aSourceBuffer The SourceBuffer which the decoder will read its data
* from.
* @param aOutputSize If Some(), the output size for the decoder. If this is
* smaller than the intrinsic size, the decoder will
* downscale the image. If Nothing(), the output size will
* be the intrinsic size.
* @param aSurfaceFlags Flags specifying the type of output this decoder
* should produce.
*/
static already_AddRefed<Decoder>
CreateAnonymousDecoder(DecoderType aType,
NotNull<SourceBuffer*> aSourceBuffer,
const Maybe<gfx::IntSize>& aOutputSize,
SurfaceFlags aSurfaceFlags);
/**
* Creates and initializes an anonymous metadata decoder (one which isn't
* associated with an Image object). This decoder will only decode the image's
* header, extracting metadata like the size of the image. No actual image
* data will be decoded and no surfaces will be allocated.
*
* @param aType Which type of decoder to create - JPEG, PNG, etc.
* @param aSourceBuffer The SourceBuffer which the decoder will read its data
* from.
*/
static already_AddRefed<Decoder>
CreateAnonymousMetadataDecoder(DecoderType aType,
NotNull<SourceBuffer*> aSourceBuffer);
private:
virtual ~DecoderFactory() = 0;
/**
* An internal method which allocates a new decoder of the requested @aType.
*/
static already_AddRefed<Decoder> GetDecoder(DecoderType aType,
RasterImage* aImage,
bool aIsRedecode);
};
} // namespace image
} // namespace mozilla
#endif // mozilla_image_DecoderFactory_h