gecko-dev/layout/generic/nsIFrame.h

1195 lines
48 KiB
C++

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: NPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Netscape Public License
* Version 1.1 (the "License"); you may not use this file except in
* compliance with the License. You may obtain a copy of the License at
* http://www.mozilla.org/NPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the NPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the NPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifndef nsIFrame_h___
#define nsIFrame_h___
/* nsIFrame is in the process of being deCOMtaminated, i.e., this file is eventually
going to be eliminated, and all callers will use nsFrame instead. At the moment
we're midway through this process, so you will see inlined functions and member
variables in this file. -dwh */
#include <stdio.h>
#include "nsISupports.h"
#include "nsEvent.h"
#include "nsStyleStruct.h"
#include "nsIStyleContext.h"
#include "nsIContent.h"
/**
* New rules of reflow:
* 1. you get a WillReflow() followed by a Reflow() followed by a DidReflow() in order
* (no separate pass over the tree)
* 2. it's the parent frame's responsibility to size/position the child's view (not
* the child frame's responsibility as it is today) during reflow (and before
* sending the DidReflow() notification)
* 3. positioning of child frames (and their views) is done on the way down the tree,
* and sizing of child frames (and their views) on the way back up
* 4. if you move a frame (outside of the reflow process, or after reflowing it),
* then you must make sure that its view (or its child frame's views) are re-positioned
* as well. It's reasonable to not position the view until after all reflowing the
* entire line, for example, but the frame should still be positioned and sized (and
* the view sized) during the reflow (i.e., before sending the DidReflow() notification)
* 5. the view system handles moving of widgets, i.e., it's not our problem
*/
struct nsHTMLReflowState;
class nsHTMLReflowCommand;
struct nsHTMLReflowMetrics;
class nsIAtom;
class nsIPresContext;
class nsIPresShell;
class nsIRenderingContext;
class nsISizeOfHandler;
class nsIView;
class nsIWidget;
class nsIDOMRange;
class nsISelectionController;
#ifdef ACCESSIBILITY
class nsIAccessible;
#endif
struct nsPeekOffsetStruct;
struct nsPoint;
struct nsRect;
struct nsSize;
struct nsMargin;
// IID for the nsIFrame interface
// a6cf9050-15b3-11d2-932e-00805f8add32
#define NS_IFRAME_IID \
{ 0xa6cf9050, 0x15b3, 0x11d2,{0x93, 0x2e, 0x00, 0x80, 0x5f, 0x8a, 0xdd, 0x32}}
/**
* Indication of how the frame can be split. This is used when doing runaround
* of floaters, and when pulling up child frames from a next-in-flow.
*
* The choices are splittable, not splittable at all, and splittable in
* a non-rectangular fashion. This last type only applies to block-level
* elements, and indicates whether splitting can be used when doing runaround.
* If you can split across page boundaries, but you expect each continuing
* frame to be the same width then return frSplittable and not
* frSplittableNonRectangular.
*
* @see #IsSplittable()
*/
typedef PRUint32 nsSplittableType;
#define NS_FRAME_NOT_SPLITTABLE 0 // Note: not a bit!
#define NS_FRAME_SPLITTABLE 0x1
#define NS_FRAME_SPLITTABLE_NON_RECTANGULAR 0x3
#define NS_FRAME_IS_SPLITTABLE(type)\
(0 != ((type) & NS_FRAME_SPLITTABLE))
#define NS_FRAME_IS_NOT_SPLITTABLE(type)\
(0 == ((type) & NS_FRAME_SPLITTABLE))
//----------------------------------------------------------------------
/**
* Frame state bits. Any bits not listed here are reserved for future
* extensions, but must be stored by the frames.
*/
typedef PRUint32 nsFrameState;
#define NS_FRAME_IN_REFLOW 0x00000001
// This bit is set when a frame is created. After it has been reflowed
// once (during the DidReflow with a finished state) the bit is
// cleared.
#define NS_FRAME_FIRST_REFLOW 0x00000002
// If this bit is is set, then the view position and size should be
// kept in sync with the frame position and size. If the bit is not
// set then it's the responsibility of the frame itself (or whoever
// created the view) to position and size its associated view
#define NS_FRAME_SYNC_FRAME_AND_VIEW 0x00000004
// If this bit is set, then there is a child frame in the frame that
// extends outside this frame's bounding box. The implication is that
// the frame's rect does not completely cover its children and
// therefore operations like rendering and hit testing (for example)
// must operate differently.
#define NS_FRAME_OUTSIDE_CHILDREN 0x00000008
// If this bit is set, then a reference to the frame is being held
// elsewhere. The frame may want to send a notification when it is
// destroyed to allow these references to be cleared.
#define NS_FRAME_EXTERNAL_REFERENCE 0x00000010
// If this bit is set, then the frame is a replaced element. For example,
// a frame displaying an image
#define NS_FRAME_REPLACED_ELEMENT 0x00000020
// If this bit is set, then the frame corresponds to generated content
#define NS_FRAME_GENERATED_CONTENT 0x00000040
// If this bit is set, then the frame has requested one or more image
// loads via the nsIPresContext.StartLoadImage API at some time during
// its lifetime.
#define NS_FRAME_HAS_LOADED_IMAGES 0x00000080
// If this bit is set, then the frame has been moved out of the flow,
// e.g., it is absolutely positioned or floated
#define NS_FRAME_OUT_OF_FLOW 0x00000100
// If this bit is set, then the frame reflects content that may be selected
#define NS_FRAME_SELECTED_CONTENT 0x00000200
// If this bit is set, then the frame is dirty and needs to be reflowed.
// This bit is set when the frame is first created
#define NS_FRAME_IS_DIRTY 0x00000400
// If this bit is set then the frame is unflowable.
#define NS_FRAME_IS_UNFLOWABLE 0x00000800
// If this bit is set, the frame has dirty children.
#define NS_FRAME_HAS_DIRTY_CHILDREN 0x00001000
// If this bit is set, the frame has an associated view
#define NS_FRAME_HAS_VIEW 0x00002000
// If this bit is set, the frame was created from anonymous content.
#define NS_FRAME_INDEPENDENT_SELECTION 0x00004000
// If this bit is set, the frame is "special" (lame term, I know),
// which means that it is part of the mangled frame hierarchy that
// results when an inline has been split because of a nested block.
#define NS_FRAME_IS_SPECIAL 0x00008000
// If this bit is set, the frame doesn't allow ignorable whitespace as
// children. For example, the whitespace between <table>\n<tr>\n<td>
// will be excluded during the construction of children.
// The bit is set when the frame is first created and remain
// unchanged during the life-time of the frame.
#define NS_FRAME_EXCLUDE_IGNORABLE_WHITESPACE 0x00010000
#ifdef IBMBIDI
// If this bit is set, the frame itself is a bidi continuation,
// or is incomplete (its next sibling is a bidi continuation)
#define NS_FRAME_IS_BIDI 0x00020000
#endif
// If this bit is set the frame has descendant with a view
#define NS_FRAME_HAS_CHILD_WITH_VIEW 0x00040000
// If this bit is set, then reflow may be dispatched from the current
// frame instead of the root frame.
#define NS_FRAME_REFLOW_ROOT 0x00080000
// The lower 20 bits of the frame state word are reserved by this API.
#define NS_FRAME_RESERVED 0x000FFFFF
// The upper 12 bits of the frame state word are reserved for frame
// implementations.
#define NS_FRAME_IMPL_RESERVED 0xFFF00000
//----------------------------------------------------------------------
enum nsFramePaintLayer {
eFramePaintLayer_Underlay = 0,
eFramePaintLayer_Content = 1,
eFramePaintLayer_Overlay = 2
};
enum nsSelectionAmount {
eSelectCharacter = 0,
eSelectWord = 1,
eSelectLine = 2, //previous drawn line in flow.
eSelectBeginLine = 3,
eSelectEndLine = 4,
eSelectNoAmount = 5, //just bounce back current offset.
eSelectDir = 6, //select next/previous frame based on direction
eSelectParagraph = 7 //select a "paragraph"
};
enum nsDirection {
eDirNext = 0,
eDirPrevious= 1
};
enum nsSpread {
eSpreadNone = 0,
eSpreadAcross = 1,
eSpreadDown = 2
};
// Carried out margin flags
#define NS_CARRIED_TOP_MARGIN_IS_AUTO 0x1
#define NS_CARRIED_BOTTOM_MARGIN_IS_AUTO 0x2
//----------------------------------------------------------------------
// For HTML reflow we rename with the different paint layers are
// actually used for.
#define NS_FRAME_PAINT_LAYER_BACKGROUND eFramePaintLayer_Underlay
#define NS_FRAME_PAINT_LAYER_FLOATERS eFramePaintLayer_Content
#define NS_FRAME_PAINT_LAYER_FOREGROUND eFramePaintLayer_Overlay
#define NS_FRAME_PAINT_LAYER_DEBUG eFramePaintLayer_Overlay
/**
* Reflow status returned by the reflow methods.
*
* NS_FRAME_NOT_COMPLETE bit flag means the frame does not map all its
* content, and that the parent frame should create a continuing frame.
* If this bit isn't set it means the frame does map all its content.
*
* NS_FRAME_REFLOW_NEXTINFLOW bit flag means that the next-in-flow is
* dirty, and also needs to be reflowed. This status only makes sense
* for a frame that is not complete, i.e. you wouldn't set both
* NS_FRAME_COMPLETE and NS_FRAME_REFLOW_NEXTINFLOW
*
* The low 8 bits of the nsReflowStatus are reserved for future extensions;
* the remaining 24 bits are zero (and available for extensions; however
* API's that accept/return nsReflowStatus must not receive/return any
* extension bits).
*
* @see #Reflow()
*/
typedef PRUint32 nsReflowStatus;
#define NS_FRAME_COMPLETE 0 // Note: not a bit!
#define NS_FRAME_NOT_COMPLETE 0x1
#define NS_FRAME_REFLOW_NEXTINFLOW 0x2
#define NS_FRAME_IS_COMPLETE(status) \
(0 == ((status) & NS_FRAME_NOT_COMPLETE))
#define NS_FRAME_IS_NOT_COMPLETE(status) \
(0 != ((status) & NS_FRAME_NOT_COMPLETE))
// This macro tests to see if an nsReflowStatus is an error value
// or just a regular return value
#define NS_IS_REFLOW_ERROR(_status) (PRInt32(_status) < 0)
/**
* Extensions to the reflow status bits defined by nsIFrameReflow
*/
// This bit is set, when a break is requested. This bit is orthogonal
// to the nsIFrame::nsReflowStatus completion bits.
#define NS_INLINE_BREAK 0x0100
// When a break is requested, this bit when set indicates that the
// break should occur after the frame just reflowed; when the bit is
// clear the break should occur before the frame just reflowed.
#define NS_INLINE_BREAK_BEFORE 0x0000
#define NS_INLINE_BREAK_AFTER 0x0200
// The type of break requested can be found in these bits.
#define NS_INLINE_BREAK_TYPE_MASK 0xF000
//----------------------------------------
// Macros that use those bits
#define NS_INLINE_IS_BREAK(_status) \
(0 != ((_status) & NS_INLINE_BREAK))
#define NS_INLINE_IS_BREAK_AFTER(_status) \
(0 != ((_status) & NS_INLINE_BREAK_AFTER))
#define NS_INLINE_IS_BREAK_BEFORE(_status) \
(NS_INLINE_BREAK == ((_status) & (NS_INLINE_BREAK|NS_INLINE_BREAK_AFTER)))
#define NS_INLINE_GET_BREAK_TYPE(_status) (((_status) >> 12) & 0xF)
#define NS_INLINE_MAKE_BREAK_TYPE(_type) ((_type) << 12)
// Construct a line-break-before status. Note that there is no
// completion status for a line-break before because we *know* that
// the frame will be reflowed later and hence it's current completion
// status doesn't matter.
#define NS_INLINE_LINE_BREAK_BEFORE() \
(NS_INLINE_BREAK | NS_INLINE_BREAK_BEFORE | \
NS_INLINE_MAKE_BREAK_TYPE(NS_STYLE_CLEAR_LINE))
// Take a completion status and add to it the desire to have a
// line-break after. For this macro we do need the completion status
// because the user of the status will need to know whether to
// continue the frame or not.
#define NS_INLINE_LINE_BREAK_AFTER(_completionStatus) \
((_completionStatus) | NS_INLINE_BREAK | NS_INLINE_BREAK_AFTER | \
NS_INLINE_MAKE_BREAK_TYPE(NS_STYLE_CLEAR_LINE))
//----------------------------------------------------------------------
/**
* DidReflow status values.
*/
typedef PRBool nsDidReflowStatus;
#define NS_FRAME_REFLOW_NOT_FINISHED PR_FALSE
#define NS_FRAME_REFLOW_FINISHED PR_TRUE
//----------------------------------------------------------------------
/**
* A frame in the layout model. This interface is supported by all frame
* objects.
*
* Frames can have multiple child lists: the default unnamed child list
* (referred to as the <i>principal</i> child list, and additional named
* child lists. There is an ordering of frames within a child list, but
* there is no order defined between frames in different child lists of
* the same parent frame.
*
* Frames are NOT reference counted. Use the Destroy() member function
* to destroy a frame. The lifetime of the frame hierarchy is bounded by the
* lifetime of the presentation shell which owns the frames.
*/
class nsIFrame : public nsISupports
{
public:
NS_DEFINE_STATIC_IID_ACCESSOR(NS_IFRAME_IID)
/**
* Called to initialize the frame. This is called immediately after creating
* the frame.
*
* If the frame is a continuing frame, then aPrevInFlow indicates the previous
* frame (the frame that was split). You should connect the continuing frame to
* its prev-in-flow, e.g. by using the AppendToFlow() function
*
* If you want a view associated with your frame, you should create the view
* now.
*
* @param aContent the content object associated with the frame
* @param aGeometricParent the geometric parent frame
* @param aContentParent the content parent frame
* @param aContext the style context associated with the frame
* @param aPrevInFlow the prev-in-flow frame
* @see #AppendToFlow()
*/
NS_IMETHOD Init(nsIPresContext* aPresContext,
nsIContent* aContent,
nsIFrame* aParent,
nsIStyleContext* aContext,
nsIFrame* aPrevInFlow) = 0;
/**
* Destroys this frame and each of its child frames (recursively calls
* Destroy() for each child)
*/
NS_IMETHOD Destroy(nsIPresContext* aPresContext) = 0;
/*
* Notify the frame that it has been removed as the primary frame for its content
*/
virtual void RemovedAsPrimaryFrame(nsIPresContext* aPresContext) {}
/**
* Called to set the initial list of frames. This happens after the frame
* has been initialized.
*
* This is only called once for a given child list, and won't be called
* at all for child lists with no initial list of frames.
*
* @param aListName the name of the child list. A NULL pointer for the atom
* name means the unnamed principal child list
* @param aChildList list of child frames. Each of the frames has its
* NS_FRAME_IS_DIRTY bit set
* @return NS_ERROR_INVALID_ARG if there is no child list with the specified
* name,
* NS_ERROR_UNEXPECTED if the frame is an atomic frame or if the
* initial list of frames has already been set for that child list,
* NS_OK otherwise
* @see #Init()
*/
NS_IMETHOD SetInitialChildList(nsIPresContext* aPresContext,
nsIAtom* aListName,
nsIFrame* aChildList) = 0;
/**
* This method is responsible for appending frames to the frame
* list. The implementation should append the frames to the specified
* child list and then generate a reflow command.
*
* @param aListName the name of the child list. A NULL pointer for the atom
* name means the unnamed principal child list
* @param aFrameList list of child frames to append. Each of the frames has
* its NS_FRAME_IS_DIRTY bit set
* @return NS_ERROR_INVALID_ARG if there is no child list with the specified
* name,
* NS_ERROR_UNEXPECTED if the frame is an atomic frame,
* NS_OK otherwise
*/
NS_IMETHOD AppendFrames(nsIPresContext* aPresContext,
nsIPresShell& aPresShell,
nsIAtom* aListName,
nsIFrame* aFrameList) = 0;
/**
* This method is responsible for inserting frames into the frame
* list. The implementation should insert the new frames into the specified
* child list and then generate a reflow command.
*
* @param aListName the name of the child list. A NULL pointer for the atom
* name means the unnamed principal child list
* @param aPrevFrame the frame to insert frames <b>after</b>
* @param aFrameList list of child frames to insert <b>after</b> aPrevFrame.
* Each of the frames has its NS_FRAME_IS_DIRTY bit set
* @return NS_ERROR_INVALID_ARG if there is no child list with the specified
* name,
* NS_ERROR_UNEXPECTED if the frame is an atomic frame,
* NS_OK otherwise
*/
NS_IMETHOD InsertFrames(nsIPresContext* aPresContext,
nsIPresShell& aPresShell,
nsIAtom* aListName,
nsIFrame* aPrevFrame,
nsIFrame* aFrameList) = 0;
/**
* This method is responsible for removing a frame in the frame
* list. The implementation should do something with the removed frame
* and then generate a reflow command. The implementation is responsible
* for destroying aOldFrame (the caller mustn't destroy aOldFrame).
*
* @param aListName the name of the child list. A NULL pointer for the atom
* name means the unnamed principal child list
* @param aOldFrame the frame to remove
* @return NS_ERROR_INVALID_ARG if there is no child list with the specified
* name,
* NS_ERROR_FAILURE if the child frame is not in the specified
* child list,
* NS_ERROR_UNEXPECTED if the frame is an atomic frame,
* NS_OK otherwise
*/
NS_IMETHOD RemoveFrame(nsIPresContext* aPresContext,
nsIPresShell& aPresShell,
nsIAtom* aListName,
nsIFrame* aOldFrame) = 0;
/**
* This method is responsible for replacing the old frame with the
* new frame. The old frame should be destroyed and the new frame inserted
* in its place in the specified child list.
*
* @param aListName the name of the child list. A NULL pointer for the atom
* name means the unnamed principal child list
* @param aOldFrame the frame to remove
* @param aNewFrame the frame to replace it with. The new frame has its
* NS_FRAME_IS_DIRTY bit set
* @return NS_ERROR_INVALID_ARG if there is no child list with the specified
* name,
* NS_ERROR_FAILURE if the old child frame is not in the specified
* child list,
* NS_ERROR_UNEXPECTED if the frame is an atomic frame,
* NS_OK otherwise
*/
NS_IMETHOD ReplaceFrame(nsIPresContext* aPresContext,
nsIPresShell& aPresShell,
nsIAtom* aListName,
nsIFrame* aOldFrame,
nsIFrame* aNewFrame) = 0;
/**
* Get the content object associated with this frame. Adds a reference to
* the content object so the caller must do a release.
*
* @see nsISupports#Release()
*/
nsresult GetContent(nsIContent** aContent) const { *aContent = mContent; NS_IF_ADDREF(*aContent); return NS_OK; }
/**
* Get the offsets of the frame. most will be 0,0
*
*/
NS_IMETHOD GetOffsets(PRInt32 &start, PRInt32 &end) const = 0;
/**
* Get the style context associated with this frame. Note that GetStyleContext()
* adds a reference to the style context so the caller must do a release.
*
* @see nsISupports#Release()
*/
nsresult GetStyleContext(nsIStyleContext** aStyleContext) const {
*aStyleContext = mStyleContext; NS_IF_ADDREF(*aStyleContext); return NS_OK;
}
nsresult SetStyleContext(nsIPresContext* aPresContext, nsIStyleContext* aContext) {
if (aContext != mStyleContext) {
NS_IF_RELEASE(mStyleContext);
if (nsnull != aContext) {
mStyleContext = aContext;
NS_ADDREF(aContext);
DidSetStyleContext(aPresContext);
}
}
return NS_OK;
}
// Style post processing hook
NS_IMETHOD DidSetStyleContext(nsIPresContext* aPresContext) = 0;
/**
* Get the style data associated with this frame.
*/
nsresult GetStyleData(nsStyleStructID aSID,
const nsStyleStruct*& aStyleStruct) const {
NS_ASSERTION(mStyleContext, "No style context found!");
aStyleStruct = mStyleContext->GetStyleData(aSID);
return NS_OK;
}
// Fill a style struct with data
nsresult GetStyle(nsStyleStructID aSID, const nsStyleStruct** aStruct) const {
NS_ASSERTION(mStyleContext, "No style context found!");
mStyleContext->GetStyle(aSID, aStruct);
return NS_OK;
}
// Utility function: more convenient than 2 calls to GetStyleData to get border and padding
NS_IMETHOD CalcBorderPadding(nsMargin& aBorderPadding) const = 0;
/**
* These methods are to access any additional style contexts that
* the frame may be holding. These are contexts that are children
* of the frame's primary context and are NOT used as style contexts
* for any child frames. These contexts also MUST NOT have any child
* contexts whatsoever. If you need to insert style contexts into the
* style tree, then you should create pseudo element frames to own them
* The indicies must be consecutive and implementations MUST return an
* NS_ERROR_INVALID_ARG if asked for an index that is out of range.
*/
NS_IMETHOD GetAdditionalStyleContext(PRInt32 aIndex,
nsIStyleContext** aStyleContext) const = 0;
NS_IMETHOD SetAdditionalStyleContext(PRInt32 aIndex,
nsIStyleContext* aStyleContext) = 0;
/**
* Accessor functions for geometric parent
*/
nsresult GetParent(nsIFrame** aParent) const { *aParent = mParent; return NS_OK; }
NS_IMETHOD SetParent(const nsIFrame* aParent) { mParent = (nsIFrame*)aParent; return NS_OK; }
/**
* Bounding rect of the frame. The values are in twips, and the origin is
* relative to the upper-left of the geometric parent. The size includes the
* content area, borders, and padding.
*
* Note: moving or sizing the frame does not affect the view's size or
* position.
*/
nsresult GetRect(nsRect& aRect) const {
aRect = mRect;
return NS_OK;
}
nsresult GetOrigin(nsPoint& aPoint) const {
aPoint.x = mRect.x;
aPoint.y = mRect.y;
return NS_OK;
}
nsresult GetSize(nsSize& aSize) const {
aSize.width = mRect.width;
aSize.height = mRect.height;
return NS_OK;
}
nsresult SetRect(nsIPresContext* aPresContext,
const nsRect& aRect) {
MoveTo(aPresContext, aRect.x, aRect.y);
SizeTo(aPresContext, aRect.width, aRect.height);
return NS_OK;
}
nsresult MoveTo(nsIPresContext* aPresContext,
nscoord aX,
nscoord aY) {
mRect.x = aX;
mRect.y = aY;
return NS_OK;
}
nsresult SizeTo(nsIPresContext* aPresContext,
nscoord aWidth,
nscoord aHeight) {
mRect.width = aWidth;
mRect.height = aHeight;
return NS_OK;
}
/**
* Used to iterate the list of additional child list names. Returns the atom
* name for the additional child list at the specified 0-based index, or a
* NULL pointer if there are no more named child lists.
*
* Note that the list is only the additional named child lists and does not
* include the unnamed principal child list.
*
* @return NS_ERROR_INVALID_ARG if the index is < 0 and NS_OK otherwise
*/
NS_IMETHOD GetAdditionalChildListName(PRInt32 aIndex,
nsIAtom** aListName) const = 0;
/**
* Get the first child frame from the specified child list.
*
* @param aListName the name of the child list. A NULL pointer for the atom
* name means the unnamed principal child list
* @return NS_ERROR_INVALID_ARG if there is no child list with the specified name
* @see #GetAdditionalListName()
*/
NS_IMETHOD FirstChild(nsIPresContext* aPresContext,
nsIAtom* aListName,
nsIFrame** aFirstChild) const = 0;
/**
* Child frames are linked together in a singly-linked list
*/
nsresult GetNextSibling(nsIFrame** aNextSibling) const {
*aNextSibling = mNextSibling;
return NS_OK;
}
nsresult SetNextSibling(nsIFrame* aNextSibling) {
mNextSibling = aNextSibling;
return NS_OK;
}
/**
* Paint is responsible for painting the frame. The aWhichLayer
* argument indicates which layer of painting should be done during
* the call.
*/
NS_IMETHOD Paint(nsIPresContext* aPresContext,
nsIRenderingContext& aRenderingContext,
const nsRect& aDirtyRect,
nsFramePaintLayer aWhichLayer,
PRUint32 aFlags = 0) = 0;
/*
* Does the frame paint its background? If not, then all or part of it will be
* painted by ancestors.
*/
virtual PRBool CanPaintBackground() { return PR_TRUE; }
/**
* Event handling of GUI events.
*
* @param aEvent event structure describing the type of event and rge widget
* where the event originated
* @param aEventStatus a return value indicating whether the event was handled
* and whether default processing should be done
*
* XXX From a frame's perspective it's unclear what the effect of the event status
* is. Does it cause the event to continue propagating through the frame hierarchy
* or is it just returned to the widgets?
*
* @see nsGUIEvent
* @see nsEventStatus
*/
NS_IMETHOD HandleEvent(nsIPresContext* aPresContext,
nsGUIEvent* aEvent,
nsEventStatus* aEventStatus) = 0;
NS_IMETHOD GetContentForEvent(nsIPresContext* aPresContext,
nsEvent* aEvent,
nsIContent** aContent) = 0;
NS_IMETHOD GetContentAndOffsetsFromPoint(nsIPresContext* aCX,
const nsPoint& aPoint,
nsIContent ** aNewContent,
PRInt32& aContentOffset,
PRInt32& aContentOffsetEnd,
PRBool& aBeginFrameContent) = 0;
/**
* Get the cursor for a given frame.
*/
NS_IMETHOD GetCursor(nsIPresContext* aPresContext,
nsPoint& aPoint,
PRInt32& aCursor) = 0;
/**
* Get the frame that should receive events for a given point in the
* coordinate space of this frame's parent, if the frame is painted in
* the given paint layer. A frame should return itself if it should
* recieve the events. A successful return value indicates that a
* point was found.
*/
NS_IMETHOD GetFrameForPoint(nsIPresContext* aPresContext,
const nsPoint& aPoint,
nsFramePaintLayer aWhichLayer,
nsIFrame** aFrame) = 0;
/**
* Get a point (in the frame's coordinate space) given an offset into
* the content. This point should be on the baseline of text with
* the correct horizontal offset
*/
NS_IMETHOD GetPointFromOffset(nsIPresContext* inPresContext,
nsIRenderingContext* inRendContext,
PRInt32 inOffset,
nsPoint* outPoint) = 0;
/**
* Get the child frame of this frame which contains the given
* content offset. outChildFrame may be this frame, or nsnull on return.
* outContentOffset returns the content offset relative to the start
* of the returned node. You can also pass a hint which tells the method
* to stick to the end of the first found frame or the beginning of the
* next in case the offset falls on a boundary.
*/
NS_IMETHOD GetChildFrameContainingOffset(PRInt32 inContentOffset,
PRBool inHint,//false stick left
PRInt32* outFrameContentOffset,
nsIFrame* *outChildFrame) = 0;
/**
* Get the current frame-state value for this frame. aResult is
* filled in with the state bits.
*/
nsresult GetFrameState(nsFrameState* aResult) {
*aResult = mState;
return NS_OK;
}
/**
* Set the current frame-state value for this frame.
*/
nsresult SetFrameState(nsFrameState aNewState) {
mState = aNewState;
return NS_OK;
}
/**
* This call is invoked when content is changed in the content tree.
* The first frame that maps that content is asked to deal with the
* change by generating an incremental reflow command.
*
* @param aPresContext the presentation context
* @param aContent the content node that was changed
* @param aSubContent a hint to the frame about the change
*/
NS_IMETHOD ContentChanged(nsIPresContext* aPresContext,
nsIContent* aChild,
nsISupports* aSubContent) = 0;
/**
* This call is invoked when the value of a content objects's attribute
* is changed.
* The first frame that maps that content is asked to deal
* with the change by doing whatever is appropriate.
*
* @param aChild the content object
* @param aAttribute the attribute whose value changed
* @param aHint the level of change that has already been dealt with
*/
NS_IMETHOD AttributeChanged(nsIPresContext* aPresContext,
nsIContent* aChild,
PRInt32 aNameSpaceID,
nsIAtom* aAttribute,
PRInt32 aModType,
PRInt32 aHint) = 0;
/**
* This call is invoked when the value of a content object's state
* is changed.
* The first frame that maps that content is asked to deal
* with the change by doing whatever is appropriate.
*
* @param aChild the content object
* @param aHint the level of change that has already been dealt with
*/
NS_IMETHOD ContentStateChanged(nsIPresContext* aPresContext,
nsIContent* aChild,
PRInt32 aHint) = 0;
/**
* Return how your frame can be split.
*/
NS_IMETHOD IsSplittable(nsSplittableType& aIsSplittable) const = 0;
/**
* Flow member functions
*/
NS_IMETHOD GetPrevInFlow(nsIFrame** aPrevInFlow) const = 0;
NS_IMETHOD SetPrevInFlow(nsIFrame*) = 0;
NS_IMETHOD GetNextInFlow(nsIFrame** aNextInFlow) const = 0;
NS_IMETHOD SetNextInFlow(nsIFrame*) = 0;
/**
* Pre-reflow hook. Before a frame is reflowed this method will be called.
* This call will always be invoked at least once before a subsequent Reflow
* and DidReflow call. It may be called more than once, In general you will
* receive on WillReflow notification before each Reflow request.
*
* XXX Is this really the semantics we want? Because we have the NS_FRAME_IN_REFLOW
* bit we can ensure we don't call it more than once...
*/
NS_IMETHOD WillReflow(nsIPresContext* aPresContext) = 0;
/**
* The frame is given a maximum size and asked for its desired size.
* This is the frame's opportunity to reflow its children.
*
* @param aDesiredSize <i>out</i> parameter where you should return the
* desired size and ascent/descent info. You should include any
* space you want for border/padding in the desired size you return.
*
* It's okay to return a desired size that exceeds the max
* size if that's the smallest you can be, i.e. it's your
* minimum size.
*
* maxElementSize is an optional parameter for returning your
* maximum element size. If may be null in which case you
* don't have to compute a maximum element size. The
* maximum element size must be less than or equal to your
* desired size.
*
* For an incremental reflow you are responsible for invalidating
* any area within your frame that needs repainting (including
* borders). If your new desired size is different than your current
* size, then your parent frame is responsible for making sure that
* the difference between the two rects is repainted
*
* @param aReflowState information about your reflow including the reason
* for the reflow and the available space in which to lay out. Each
* dimension of the available space can either be constrained or
* unconstrained (a value of NS_UNCONSTRAINEDSIZE). If constrained
* you should choose a value that's less than or equal to the
* constrained size. If unconstrained you can choose as
* large a value as you like.
*
* Note that the available space can be negative. In this case you
* still must return an accurate desired size. If you're a container
* you must <b>always</b> reflow at least one frame regardless of the
* available space
*
* @param aStatus a return value indicating whether the frame is complete
* and whether the next-in-flow is dirty and needs to be reflowed
*/
NS_IMETHOD Reflow(nsIPresContext* aPresContext,
nsHTMLReflowMetrics& aReflowMetrics,
const nsHTMLReflowState& aReflowState,
nsReflowStatus& aStatus) = 0;
/**
* Post-reflow hook. After a frame is reflowed this method will be called
* informing the frame that this reflow process is complete, and telling the
* frame the status returned by the Reflow member function.
*
* This call may be invoked many times, while NS_FRAME_IN_REFLOW is set, before
* it is finally called once with a NS_FRAME_REFLOW_COMPLETE value. When called
* with a NS_FRAME_REFLOW_COMPLETE value the NS_FRAME_IN_REFLOW bit in the
* frame state will be cleared.
*
* XXX This doesn't make sense. If the frame is reflowed but not complete, then
* the status should be NS_FRAME_NOT_COMPLETE and not NS_FRAME_COMPLETE
* XXX Don't we want the semantics to dictate that we only call this once for
* a given reflow?
*/
NS_IMETHOD DidReflow(nsIPresContext* aPresContext,
const nsHTMLReflowState* aReflowState,
nsDidReflowStatus aStatus) = 0;
// XXX Maybe these three should be a separate interface?
/**
* Helper method used by block reflow to identify runs of text so
* that proper word-breaking can be done.
*
* @param aContinueTextRun A frame should set aContinueTextRun to
* PR_TRUE if we can continue a "text run" through the frame. A
* text run is text that should be treated contiguously for line
* and word breaking.
*
* @return The return value is irrelevant.
*/
NS_IMETHOD CanContinueTextRun(PRBool& aContinueTextRun) const = 0;
// Justification helper method used to distribute extra space in a
// line to leaf frames. aUsedSpace is filled in with the amount of
// space actually used.
NS_IMETHOD AdjustFrameSize(nscoord aExtraSpace, nscoord& aUsedSpace) = 0;
// Justification helper method that is used to remove trailing
// whitespace before justification.
NS_IMETHOD TrimTrailingWhiteSpace(nsIPresContext* aPresContext,
nsIRenderingContext& aRC,
nscoord& aDeltaWidth) = 0;
/**
* Accessor functions to get/set the associated view object
*/
NS_IMETHOD GetView(nsIPresContext* aPresContext,
nsIView** aView) const = 0; // may be null
NS_IMETHOD SetView(nsIPresContext* aPresContext,
nsIView* aView) = 0;
/**
* Find the first geometric parent that has a view
*/
NS_IMETHOD GetParentWithView(nsIPresContext* aPresContext,
nsIFrame** aParent) const = 0;
/**
* Returns the offset from this frame to the closest geometric parent that
* has a view. Also returns the containing view or null in case of error
*/
NS_IMETHOD GetOffsetFromView(nsIPresContext* aPresContext,
nsPoint& aOffset,
nsIView** aView) const = 0;
/**
* Returns the offset from this frame's upper left corner to the upper
* left corner of the view returned by a call to GetView(). aOffset
* will contain the offset to the view or (0,0) if the frame has no
* view. aView will contain a pointer to the view returned by GetView().
* aView is optional, that is, you may pass null if you are not interested
* in getting a pointer to the view.
*/
NS_IMETHOD GetOriginToViewOffset(nsIPresContext* aPresContext,
nsPoint& aOffset,
nsIView** aView) const = 0;
/**
* Returns the window that contains this frame. If this frame has a
* view and the view has a window, then this frames window is
* returned, otherwise this frame's geometric parent is checked
* recursively upwards.
*/
NS_IMETHOD GetWindow(nsIPresContext* aPresContext,
nsIWidget** aWidget) const = 0;
/**
* Get the "type" of the frame. May return a NULL atom pointer
*
* @see nsLayoutAtoms
*/
NS_IMETHOD GetFrameType(nsIAtom** aType) const = 0;
/**
* Is this frame a "containing block"?
*/
NS_IMETHOD IsPercentageBase(PRBool& aBase) const = 0;
/**
* called when the frame has been scrolled to a new
* position. only called for frames with views.
*/
NS_IMETHOD Scrolled(nsIView *aView) = 0;
/** Selection related calls
*/
/**
* Called to set the selection of the frame based on frame offsets. you can FORCE the frame
* to redraw event if aSelected == the frame selection with the last parameter.
* data in struct may be changed when passed in.
* @param aRange is the range that will dictate if the frames need to be redrawn null means the whole content needs to be redrawn
* @param aSelected is it selected?
* @param aSpread should it spread the selection to flow elements around it? or go down to its children?
*/
NS_IMETHOD SetSelected(nsIPresContext* aPresContext,
nsIDOMRange* aRange,
PRBool aSelected,
nsSpread aSpread) = 0;
NS_IMETHOD GetSelected(PRBool *aSelected) const = 0;
/**
* called to discover where this frame, or a parent frame has user-select style
* applied, which affects that way that it is selected.
*
* @param aIsSelectable out param. Set to true if the frame can be selected
* (i.e. is not affected by user-select: none)
* @param aSelectStyle out param. Returns the type of selection style found
* (using values defined in nsStyleConsts.h).
*/
NS_IMETHOD IsSelectable(PRBool* aIsSelectable, PRUint8* aSelectStyle) const = 0;
/**
* Called to retrieve the SelectionController associated with the frame.
* @param aSelCon will contain the selection controller associated with
* the frame.
*/
NS_IMETHOD GetSelectionController(nsIPresContext *aPresContext, nsISelectionController **aSelCon) = 0;
/** EndSelection related calls
*/
/**
* Call to turn on/off mouseCapture at the view level. Needed by the ESM so
* it must be in the public interface.
* @param aPresContext presContext associated with the frame
* @param aGrabMouseEvents PR_TRUE to enable capture, PR_FALSE to disable
*/
NS_IMETHOD CaptureMouse(nsIPresContext* aPresContext, PRBool aGrabMouseEvents) = 0;
/**
* called to find the previous/next character, word, or line returns the actual
* nsIFrame and the frame offset. THIS DOES NOT CHANGE SELECTION STATE
* uses frame's begin selection state to start. if no selection on this frame will
* return NS_ERROR_FAILURE
* @param aPOS is defined in nsIFrameSelection
*/
NS_IMETHOD PeekOffset(nsIPresContext* aPresContext, nsPeekOffsetStruct *aPos) = 0;
/**
* called to see if the children of the frame are visible from indexstart to index end.
* this does not change any state. returns PR_TRUE only if the indexes are valid and any of
* the children are visible. for textframes this index is the character index.
* if aStart = aEnd result will be PR_FALSE
* @param aStart start index of first child from 0-N (number of children)
* @param aEnd end index of last child from 0-N
* @param aRecurse should this frame talk to siblings to get to the contents other children?
* @param aFinished did this frame have the aEndIndex? or is there more work to do
* @param _retval return value true or false. false = range is not rendered.
*/
NS_IMETHOD CheckVisibility(nsIPresContext* aContext, PRInt32 aStartIndex, PRInt32 aEndIndex, PRBool aRecurse, PRBool *aFinished, PRBool *_retval)=0;
/**
* Called by a child frame on a parent frame to tell the parent frame that the child needs
* to be reflowed. The parent should either propagate the request to its parent frame or
* handle the request by generating a eReflowType_ReflowDirtyChildren reflow command.
*/
NS_IMETHOD ReflowDirtyChild(nsIPresShell* aPresShell, nsIFrame* aChild) = 0;
/**
* Called to retrieve this frame's accessible.
* If this frame implements Accessibility return a valid accessible
* If not return NS_ERROR_NOT_IMPLEMENTED.
* Note: nsAccessible must be refcountable. Do not implement directly on your frame
* Use a mediatior of some kind.
*/
#ifdef ACCESSIBILITY
NS_IMETHOD GetAccessible(nsIAccessible** aAccessible) = 0;
#endif
/**
* Called during appending or cancelling a reflow command to give frames notice
* of reflow commands that will be targeted below them.
*/
NS_IMETHOD ReflowCommandNotify(nsIPresShell* aShell,
nsHTMLReflowCommand* aRC,
PRBool aCommandAdded) = 0;
/**
* Get the frame whose style context should be the parent of this
* frame's style context (i.e., provide the parent style context).
* This frame must either be an ancestor of this frame or a child. If
* this frame returns a child frame, then the child frame must be sure
* to return a grandparent or higher!
*
* @param aPresContext: PresContext
* @param aProviderFrame: The frame whose style context should be the
* parent of this frame's style context. Null
* is permitted, and means that this frame's
* style context should be the root of the
* style context tree.
* @param aIsChild: True if |aProviderFrame| is set to a child
* of this frame; false if it is an ancestor or
* null.
*/
NS_IMETHOD GetParentStyleContextFrame(nsIPresContext* aPresContext,
nsIFrame** aProviderFrame,
PRBool* aIsChild) = 0;
/**
* Determines whether a frame is visible for painting
* this takes into account whether it is painting a selection or printing.
* @param aPresContext PresContext
* @param aRenderingContext PresContext
* @param aCheckVis indicates whether it should check for CSS visibility,
* PR_FALSE skips the check, PR_TRUE does the check
* @param aIsVisible return value
*/
NS_IMETHOD IsVisibleForPainting(nsIPresContext * aPresContext,
nsIRenderingContext& aRenderingContext,
PRBool aCheckVis,
PRBool* aIsVisible) = 0;
/**
* Determine whether the frame is logically empty, i.e., whether the
* layout would be the same whether or not the frame is present.
* Placeholder frames should return true. Block frames should be
* considered empty whenever margins collapse through them, even
* though those margins are relevant.
*
* aIsPre should be ignored by frames to which the 'white-space'
* property applies.
*/
NS_IMETHOD IsEmpty(PRBool aIsQuirkMode,
PRBool aIsPre,
PRBool* aResult) = 0;
#ifdef IBMBIDI
/**
* retrieve and set Bidi property of this frame
* @lina 5/1/2000
*/
NS_IMETHOD GetBidiProperty(nsIPresContext* aPresContext,
nsIAtom* aPropertyName,
void** aPropertyValue,
size_t aSize ) const = 0;
NS_IMETHOD SetBidiProperty(nsIPresContext* aPresContext,
nsIAtom* aPropertyName,
void* aPropertyValue) = 0;
#endif // IBMBIDI
protected:
// Members
nsRect mRect;
nsIContent* mContent;
nsIStyleContext* mStyleContext;
nsIFrame* mParent;
nsIFrame* mNextSibling; // singly-linked list of frames
nsFrameState mState;
private:
NS_IMETHOD_(nsrefcnt) AddRef(void) = 0;
NS_IMETHOD_(nsrefcnt) Release(void) = 0;
};
// typesafe way to access style data. See comment in nsStyleStruct.h
// and also overloaded function in nsIStyleContext.h
template <class T>
inline void
GetStyleData(nsIFrame* aFrame, const T** aStyleStruct)
{
aFrame->GetStyleData(NS_GET_STYLESTRUCTID(T),
*NS_REINTERPRET_CAST(const nsStyleStruct**, aStyleStruct));
}
#endif /* nsIFrame_h___ */