gecko-dev/nsprpub/pr/tests/io_timeout.c
2004-04-25 15:03:26 +00:00

300 lines
8.3 KiB
C

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape Portable Runtime (NSPR).
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
** Test socket IO timeouts
**
**
**
**
** Modification History:
** 14-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
** The debug mode will print all of the printfs associated with this test.
** The regress mode will be the default mode. Since the regress tool limits
** the output to a one line status:PASS or FAIL,all of the printf statements
** have been handled with an if (debug_mode) statement.
***********************************************************************/
/***********************************************************************
** Includes
***********************************************************************/
/* Used to get the command line option */
#include "plgetopt.h"
#include <stdio.h>
#include "nspr.h"
#ifdef XP_MAC
#include "prlog.h"
#define printf PR_LogPrint
extern void SetupMacPrintfLog(char *logFile);
#endif
#define NUM_THREADS 1
#define BASE_PORT 8000
#define DEFAULT_ACCEPT_TIMEOUT 2
typedef struct threadInfo {
PRInt16 id;
PRInt16 accept_timeout;
PRLock *dead_lock;
PRCondVar *dead_cv;
PRInt32 *alive;
} threadInfo;
PRIntn failed_already = 0;
PRIntn debug_mode = 0;
#define LOCAL_SCOPE_STRING "LOCAL scope"
#define GLOBAL_SCOPE_STRING "GLOBAL scope"
#define GLOBAL_BOUND_SCOPE_STRING "GLOBAL_BOUND scope"
void
thread_main(void *_info)
{
threadInfo *info = (threadInfo *)_info;
PRNetAddr listenAddr;
PRNetAddr clientAddr;
PRFileDesc *listenSock = NULL;
PRFileDesc *clientSock;
PRStatus rv;
PRThreadScope tscope;
char *scope_str;
if (debug_mode)
printf("thread %d is alive\n", info->id);
tscope = PR_GetThreadScope(PR_GetCurrentThread());
switch(tscope) {
case PR_LOCAL_THREAD:
scope_str = LOCAL_SCOPE_STRING;
break;
case PR_GLOBAL_THREAD:
scope_str = GLOBAL_SCOPE_STRING;
break;
case PR_GLOBAL_BOUND_THREAD:
scope_str = GLOBAL_BOUND_SCOPE_STRING;
break;
default:
PR_ASSERT(!"Invalid thread scope");
break;
}
printf("thread id %d, scope %s\n", info->id, scope_str);
listenSock = PR_NewTCPSocket();
if (!listenSock) {
if (debug_mode)
printf("unable to create listen socket\n");
failed_already=1;
goto dead;
}
listenAddr.inet.family = PR_AF_INET;
listenAddr.inet.port = PR_htons(BASE_PORT + info->id);
listenAddr.inet.ip = PR_htonl(PR_INADDR_ANY);
rv = PR_Bind(listenSock, &listenAddr);
if (rv == PR_FAILURE) {
if (debug_mode)
printf("unable to bind\n");
failed_already=1;
goto dead;
}
rv = PR_Listen(listenSock, 4);
if (rv == PR_FAILURE) {
if (debug_mode)
printf("unable to listen\n");
failed_already=1;
goto dead;
}
if (debug_mode)
printf("thread %d going into accept for %d seconds\n",
info->id, info->accept_timeout + info->id);
clientSock = PR_Accept(listenSock, &clientAddr, PR_SecondsToInterval(info->accept_timeout +info->id));
if (clientSock == NULL) {
if (PR_GetError() == PR_IO_TIMEOUT_ERROR) {
if (debug_mode) {
printf("PR_Accept() timeout worked!\n");
printf("TEST PASSED! PR_Accept() returned error %d\n",
PR_IO_TIMEOUT_ERROR);
}
} else {
if (debug_mode)
printf("TEST FAILED! PR_Accept() returned error %d\n",
PR_GetError());
failed_already=1;
}
} else {
if (debug_mode)
printf ("TEST FAILED! PR_Accept() succeeded?\n");
failed_already=1;
PR_Close(clientSock);
}
dead:
if (listenSock) {
PR_Close(listenSock);
}
PR_Lock(info->dead_lock);
(*info->alive)--;
PR_NotifyCondVar(info->dead_cv);
PR_Unlock(info->dead_lock);
if (debug_mode)
printf("thread %d is dead\n", info->id);
PR_Free(info);
}
void
thread_test(PRThreadScope scope, PRInt32 num_threads)
{
PRInt32 index;
PRThread *thr;
PRLock *dead_lock;
PRCondVar *dead_cv;
PRInt32 alive;
if (debug_mode)
printf("IO Timeout test started with %d threads\n", num_threads);
dead_lock = PR_NewLock();
dead_cv = PR_NewCondVar(dead_lock);
alive = num_threads;
for (index = 0; index < num_threads; index++) {
threadInfo *info = (threadInfo *)PR_Malloc(sizeof(threadInfo));
info->id = index;
info->dead_lock = dead_lock;
info->dead_cv = dead_cv;
info->alive = &alive;
info->accept_timeout = DEFAULT_ACCEPT_TIMEOUT;
thr = PR_CreateThread( PR_USER_THREAD,
thread_main,
(void *)info,
PR_PRIORITY_NORMAL,
scope,
PR_UNJOINABLE_THREAD,
0);
if (!thr) {
printf("Failed to create thread, error = %d(%d)\n",
PR_GetError(), PR_GetOSError());
failed_already=1;
PR_Lock(dead_lock);
alive--;
PR_Unlock(dead_lock);
}
}
PR_Lock(dead_lock);
while(alive) {
if (debug_mode)
printf("main loop awake; alive = %d\n", alive);
PR_WaitCondVar(dead_cv, PR_INTERVAL_NO_TIMEOUT);
}
PR_Unlock(dead_lock);
PR_DestroyCondVar(dead_cv);
PR_DestroyLock(dead_lock);
}
int main(int argc, char **argv)
{
PRInt32 num_threads = 0;
/* The command line argument: -d is used to determine if the test is being run
in debug mode. The regress tool requires only one line output:PASS or FAIL.
All of the printfs associated with this test has been handled with a if (debug_mode)
test.
Usage: test_name [-d] [-t <threads>]
*/
PLOptStatus os;
PLOptState *opt = PL_CreateOptState(argc, argv, "dt:");
while (PL_OPT_EOL != (os = PL_GetNextOpt(opt)))
{
if (PL_OPT_BAD == os) continue;
switch (opt->option)
{
case 'd': /* debug mode */
debug_mode = 1;
break;
case 't': /* threads to involve */
num_threads = atoi(opt->value);
break;
default:
break;
}
}
PL_DestroyOptState(opt);
/* main test */
if (0 == num_threads)
num_threads = NUM_THREADS;
PR_Init(PR_USER_THREAD, PR_PRIORITY_LOW, 0);
PR_STDIO_INIT();
#ifdef XP_MAC
SetupMacPrintfLog("io_timeout.log");
debug_mode = 1;
#endif
printf("test with global bound thread\n");
thread_test(PR_GLOBAL_BOUND_THREAD, num_threads);
printf("test with local thread\n");
thread_test(PR_LOCAL_THREAD, num_threads);
printf("test with global thread\n");
thread_test(PR_GLOBAL_THREAD, num_threads);
PR_Cleanup();
if (failed_already)
return 1;
else
return 0;
}