gecko-dev/embedding/qa/testembed/TestEmbed.cpp
2004-04-18 22:01:16 +00:00

700 lines
20 KiB
C++

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Chak Nanga <chak@netscape.com>
* Conrad Carlen <ccarlen@netscape.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
// File Overview....
//
// The typical MFC app, frame creation code + AboutDlg handling
//
// NS_InitEmbedding() is called in InitInstance()
//
// NS_TermEmbedding() is called in ExitInstance()
// ExitInstance() also takes care of cleaning up of
// multiple browser frame windows on app exit
//
//
// Code to handle the creation of a new browser window
// Next suggested file to look at : BrowserFrm.cpp
// Local Includes
#include "stdafx.h"
#include "BrowserImpl.h"
#include "TestEmbed.h"
#include "BrowserFrm.h"
#include "winEmbedFileLocProvider.h"
#include "ProfileMgr.h"
#include "BrowserView.h"
#include "nsIWindowWatcher.h"
#include "plstr.h"
#include "Preferences.h"
#include <io.h>
#include <fcntl.h>
#include "QAUtils.h"
#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif
// this is for overriding the Mozilla default PromptService component
#include "PromptService.h"
#define kComponentsLibname "testEmbedComponents.dll"
#define NS_PROMPTSERVICE_CID \
{0xa2112d6a, 0x0e28, 0x421f, {0xb4, 0x6a, 0x25, 0xc0, 0xb3, 0x8, 0xcb, 0xd0}}
static NS_DEFINE_CID(kPromptServiceCID, NS_PROMPTSERVICE_CID);
BEGIN_MESSAGE_MAP(CTestEmbedApp, CWinApp)
//{{AFX_MSG_MAP(CTestEmbedApp)
ON_COMMAND(ID_NEW_BROWSER, OnNewBrowser)
ON_COMMAND(ID_MANAGE_PROFILES, OnManageProfiles)
ON_COMMAND(ID_APP_ABOUT, OnAppAbout)
ON_COMMAND(ID_EDIT_PREFERENCES, OnEditPreferences)
// NOTE - the ClassWizard will add and remove mapping macros here.
// DO NOT EDIT what you see in these blocks of generated code!
//}}AFX_MSG_MAP
END_MESSAGE_MAP()
CTestEmbedApp::CTestEmbedApp() :
m_ProfileMgr(NULL)
{
mRefCnt = 1; // Start at one - nothing is going to addref this object
m_strHomePage = "";
m_iStartupPage = 0;
}
CTestEmbedApp theApp;
BOOL CTestEmbedApp::IsCmdLineSwitch(const char *pSwitch, BOOL bRemove)
{
// Search for the switch in the command line.
// Don't take it out of m_lpCmdLine by default
char *pFound = PL_strcasestr(m_lpCmdLine, pSwitch);
if(pFound == NULL ||
// Switch must be at beginning of command line
// or have a space in front of it to avoid
// mangling filenames
( (pFound != m_lpCmdLine) &&
*(pFound-1) != ' ' ) )
{
return(FALSE);
}
if (bRemove)
{
// remove the flag from the command line
char *pTravEnd = pFound + strlen(pSwitch);
char *pTraverse = pFound;
*pTraverse = *pTravEnd;
while(*pTraverse != '\0')
{
pTraverse++;
pTravEnd++;
*pTraverse = *pTravEnd;
}
}
return(TRUE);
}
void CTestEmbedApp::ParseCmdLine()
{
// Show Debug Console?
if(IsCmdLineSwitch("-console"))
ShowDebugConsole();
}
/* Some Gecko interfaces are implemented as components, automatically
registered at application initialization. nsIPrompt is an example:
the default implementation uses XUL, not native windows. Embedding
apps can override the default implementation by implementing the
nsIPromptService interface and registering a factory for it with
the same CID and Contract ID as the default's.
Note that this example implements the service in a separate DLL,
replacing the default if the override DLL is present. This could
also have been done in the same module, without a separate DLL.
See the PowerPlant example for, well, an example.
*/
nsresult CTestEmbedApp::OverrideComponents()
{
nsresult rv = NS_OK;
// replace Mozilla's default PromptService with our own, if the
// expected override DLL is present
HMODULE overlib = ::LoadLibrary(kComponentsLibname);
if (overlib) {
InitPromptServiceType InitLib;
MakeFactoryType MakeFactory;
InitLib = reinterpret_cast<InitPromptServiceType>(::GetProcAddress(overlib, kPromptServiceInitFuncName));
MakeFactory = reinterpret_cast<MakeFactoryType>(::GetProcAddress(overlib, kPromptServiceFactoryFuncName));
if (InitLib && MakeFactory) {
InitLib(overlib);
nsCOMPtr<nsIFactory> promptFactory;
rv = MakeFactory(getter_AddRefs(promptFactory));
if (NS_SUCCEEDED(rv))
nsComponentManager::RegisterFactory(kPromptServiceCID,
"Prompt Service",
"@mozilla.org/embedcomp/prompt-service;1",
promptFactory,
PR_TRUE); // replace existing
} else
::FreeLibrary(overlib);
}
return rv;
}
void CTestEmbedApp::ShowDebugConsole()
{
#ifdef _DEBUG
// Show console only in debug mode
if(! AllocConsole())
return;
// Redirect stdout to the console
int hCrtOut = _open_osfhandle(
(long) GetStdHandle(STD_OUTPUT_HANDLE),
_O_TEXT);
if(hCrtOut == -1)
return;
FILE *hfOut = _fdopen(hCrtOut, "w");
if(hfOut != NULL)
{
// Setup for unbuffered I/O so the console
// output shows up right away
*stdout = *hfOut;
setvbuf(stdout, NULL, _IONBF, 0);
}
// Redirect stderr to the console
int hCrtErr = _open_osfhandle(
(long) GetStdHandle(STD_ERROR_HANDLE),
_O_TEXT);
if(hCrtErr == -1)
return;
FILE *hfErr = _fdopen(hCrtErr, "w");
if(hfErr != NULL)
{
// Setup for unbuffered I/O so the console
// output shows up right away
*stderr = *hfErr;
setvbuf(stderr, NULL, _IONBF, 0);
}
#endif
}
// Initialize our MFC application and also init
// the Gecko embedding APIs
// Note that we're also init'ng the profile switching
// code here
// Then, create a new BrowserFrame and load our
// default homepage
//
BOOL CTestEmbedApp::InitInstance()
{
QAOutput("****************************************************\r\n");
ParseCmdLine();
Enable3dControls();
//
// 1. Determine the name of the dir from which the MRE based app is being run
// from [It's OK to do this even if you're not running in an MRE env]
//
// 2. Create an nsILocalFile out of it which will passed in to NS_InitEmbedding()
//
// Please see http://www.mozilla.org/projects/embedding/MRE.html
// for more info. on MRE
char curDir[_MAX_PATH+1];
::GetCurrentDirectory(_MAX_PATH, curDir);
nsresult rv;
nsCOMPtr<nsILocalFile> mreAppDir;
rv = NS_NewNativeLocalFile(nsDependentCString(curDir), TRUE, getter_AddRefs(mreAppDir));
NS_ASSERTION(NS_SUCCEEDED(rv), "failed to create mreAppDir localfile");
// Take a look at
// http://www.mozilla.org/projects/xpcom/file_locations.html
// for more info on File Locations
winEmbedFileLocProvider *provider = new winEmbedFileLocProvider("TestEmbed");
if(!provider)
{
ASSERT(FALSE);
return FALSE;
}
rv = NS_InitEmbedding(mreAppDir, provider);
if(NS_FAILED(rv))
{
QAOutput("TestEmbed didn't start up.");
ASSERT(FALSE);
return FALSE;
}
else
QAOutput("TestEmbed started up.");
rv = OverrideComponents();
if(NS_FAILED(rv))
{
ASSERT(FALSE);
return FALSE;
}
rv = InitializeWindowCreator();
if (NS_FAILED(rv))
{
ASSERT(FALSE);
return FALSE;
}
if(!InitializeProfiles())
{
ASSERT(FALSE);
rv = NS_TermEmbedding();
RvTestResult(rv, "TestEmbed shutdown");
return FALSE;
}
rv = InitializePrefs();
if (NS_FAILED(rv))
{
ASSERT(FALSE);
NS_TermEmbedding();
return FALSE;
}
if(!CreateHiddenWindow())
{
ASSERT(FALSE);
rv = NS_TermEmbedding();
RvTestResult(rv, "TestEmbed shutdown");
return FALSE;
}
// Create the first browser frame window
OnNewBrowser();
return TRUE;
}
CBrowserFrame* CTestEmbedApp::CreateNewBrowserFrame(PRUint32 chromeMask,
PRInt32 x, PRInt32 y,
PRInt32 cx, PRInt32 cy,
PRBool bShowWindow)
{
// Setup a CRect with the requested window dimensions
CRect winSize(x, y, cx, cy);
// Use the Windows default if all are specified as -1
if(x == -1 && y == -1 && cx == -1 && cy == -1)
winSize = CFrameWnd::rectDefault;
// Load the window title from the string resource table
CString strTitle;
strTitle.LoadString(IDR_MAINFRAME);
// Now, create the browser frame
CBrowserFrame* pFrame = new CBrowserFrame(chromeMask);
if (!pFrame->Create(NULL, strTitle, WS_OVERLAPPEDWINDOW,
winSize, NULL, MAKEINTRESOURCE(IDR_MAINFRAME), 0L, NULL))
{
return NULL;
}
// load accelerator resource
pFrame->LoadAccelTable(MAKEINTRESOURCE(IDR_MAINFRAME));
// Show the window...
if(bShowWindow)
{
pFrame->ShowWindow(SW_SHOW);
pFrame->UpdateWindow();
}
// Add to the list of BrowserFrame windows
m_FrameWndLst.AddHead(pFrame);
return pFrame;
}
void CTestEmbedApp::OnNewBrowser()
{
CBrowserFrame *pBrowserFrame = CreateNewBrowserFrame();
//Load the HomePage into the browser view
if(pBrowserFrame && (GetStartupPageMode() == 1))
pBrowserFrame->m_wndBrowserView.LoadHomePage();
}
// This gets called anytime a BrowserFrameWindow is
// closed i.e. by choosing the "close" menu item from
// a window's system menu or by dbl clicking on the
// system menu box
//
// Sends a WM_QUIT to the hidden window which results
// in ExitInstance() being called and the app is
// properly cleaned up and shutdown
//
void CTestEmbedApp::RemoveFrameFromList(CBrowserFrame* pFrm, BOOL bCloseAppOnLastFrame/*= TRUE*/)
{
POSITION pos = m_FrameWndLst.Find(pFrm);
m_FrameWndLst.RemoveAt(pos);
// Send a WM_QUIT msg. to the hidden window if we've
// just closed the last browserframe window and
// if the bCloseAppOnLastFrame is TRUE. This be FALSE
// only in the case we're switching profiles
// Without this the hidden window will stick around
// i.e. the app will never die even after all the
// visible windows are gone.
if(m_FrameWndLst.GetCount() == 0 && bCloseAppOnLastFrame)
m_pMainWnd->PostMessage(WM_QUIT);
}
int CTestEmbedApp::ExitInstance()
{
// When File/Exit is chosen and if the user
// has opened multiple browser windows shut all
// of them down properly before exiting the app
CBrowserFrame* pBrowserFrame = NULL;
nsresult rv;
POSITION pos = m_FrameWndLst.GetHeadPosition();
while( pos != NULL )
{
pBrowserFrame = (CBrowserFrame *) m_FrameWndLst.GetNext(pos);
if(pBrowserFrame)
{
pBrowserFrame->ShowWindow(false);
pBrowserFrame->DestroyWindow();
}
}
m_FrameWndLst.RemoveAll();
if (m_pMainWnd)
m_pMainWnd->DestroyWindow();
delete m_ProfileMgr;
rv = NS_TermEmbedding();
if (NS_FAILED(rv))
QAOutput("TestEmbed didn't shut down.");
else
QAOutput("TestEmbed shut down.");
return 1;
}
BOOL CTestEmbedApp::OnIdle(LONG lCount)
{
CWinApp::OnIdle(lCount);
return FALSE;
}
void CTestEmbedApp::OnManageProfiles()
{
m_ProfileMgr->DoManageProfilesDialog(PR_FALSE);
}
void CTestEmbedApp::OnEditPreferences()
{
CPreferences prefs(_T("Preferences"));
prefs.m_startupPage.m_iStartupPage = m_iStartupPage;
prefs.m_startupPage.m_strHomePage = m_strHomePage;
if(prefs.DoModal() == IDOK)
{
// Update our member vars with these new pref values
m_iStartupPage = prefs.m_startupPage.m_iStartupPage;
m_strHomePage = prefs.m_startupPage.m_strHomePage;
// Save these changes to disk now
nsresult rv;
nsCOMPtr<nsIPref> prefs(do_GetService(NS_PREF_CONTRACTID,&rv));
if (NS_SUCCEEDED(rv))
{
prefs->SetIntPref("browser.startup.page", m_iStartupPage);
rv = prefs->SetCharPref("browser.startup.homepage", m_strHomePage);
if (NS_SUCCEEDED(rv))
rv = prefs->SavePrefFile(nsnull);
}
else
NS_ASSERTION(PR_FALSE, "Could not get preferences service");
}
}
BOOL CTestEmbedApp::InitializeProfiles()
{
m_ProfileMgr = new CProfileMgr;
if (!m_ProfileMgr)
return FALSE;
nsresult rv;
nsCOMPtr<nsIObserverService>observerService(do_GetService("@mozilla.org/observer-service;1",&rv));
if (NS_SUCCEEDED(rv))
{
observerService->AddObserver(this, "profile-approve-change", PR_TRUE);
observerService->AddObserver(this, "profile-change-teardown", PR_TRUE);
observerService->AddObserver(this, "profile-after-change", PR_TRUE);
}
m_ProfileMgr->StartUp();
return TRUE;
}
// When the profile switch happens, all open browser windows need to be
// closed.
// In order for that not to kill off the app, we just make the MFC app's
// mainframe be an invisible window which doesn't get closed on profile
// switches
BOOL CTestEmbedApp::CreateHiddenWindow()
{
CFrameWnd *hiddenWnd = new CFrameWnd;
if(!hiddenWnd)
return FALSE;
RECT bounds = { -10010, -10010, -10000, -10000 };
hiddenWnd->Create(NULL, "main", WS_DISABLED, bounds, NULL, NULL, 0, NULL);
m_pMainWnd = hiddenWnd;
return TRUE;
}
nsresult CTestEmbedApp::InitializePrefs()
{
nsresult rv;
nsCOMPtr<nsIPref> prefs(do_GetService(NS_PREF_CONTRACTID,&rv));
if (NS_SUCCEEDED(rv)) {
// We are using the default prefs from mozilla. If you were
// disributing your own, this would be done simply by editing
// the default pref files.
PRBool inited;
rv = prefs->GetBoolPref("mfcbrowser.prefs_inited", &inited);
if (NS_FAILED(rv) || !inited)
{
m_iStartupPage = 1;
m_strHomePage = "http://www.mozilla.org/projects/embedding";
prefs->SetIntPref("browser.startup.page", m_iStartupPage);
prefs->SetCharPref("browser.startup.homepage", m_strHomePage);
prefs->SetIntPref("font.size.variable.x-western", 16);
prefs->SetIntPref("font.size.fixed.x-western", 13);
rv = prefs->SetBoolPref("mfcbrowser.prefs_inited", PR_TRUE);
if (NS_SUCCEEDED(rv))
rv = prefs->SavePrefFile(nsnull);
}
else
{
// The prefs are present, read them in
prefs->GetIntPref("browser.startup.page", &m_iStartupPage);
CString strBuf;
char *pBuf = strBuf.GetBuffer(_MAX_PATH);
prefs->CopyCharPref("browser.startup.homepage", &pBuf);
strBuf.ReleaseBuffer(-1);
if(pBuf)
m_strHomePage = pBuf;
}
}
else
NS_ASSERTION(PR_FALSE, "Could not get preferences service");
return rv;
}
/* InitializeWindowCreator creates and hands off an object with a callback
to a window creation function. This will be used by Gecko C++ code
(never JS) to create new windows when no previous window is handy
to begin with. This is done in a few exceptional cases, like PSM code.
Failure to set this callback will only disable the ability to create
new windows under these circumstances. */
nsresult CTestEmbedApp::InitializeWindowCreator()
{
// give an nsIWindowCreator to the WindowWatcher service
nsCOMPtr<nsIWindowCreator> windowCreator(NS_STATIC_CAST(nsIWindowCreator *, this));
if (windowCreator) {
nsCOMPtr<nsIWindowWatcher> wwatch(do_GetService(NS_WINDOWWATCHER_CONTRACTID));
if (wwatch) {
wwatch->SetWindowCreator(windowCreator);
return NS_OK;
}
}
return NS_ERROR_FAILURE;
}
// ---------------------------------------------------------------------------
// CTestEmbedApp : nsISupports
// ---------------------------------------------------------------------------
NS_IMPL_THREADSAFE_ISUPPORTS3(CTestEmbedApp, nsIObserver, nsIWindowCreator, nsISupportsWeakReference)
// ---------------------------------------------------------------------------
// CTestEmbedApp : nsIObserver
// ---------------------------------------------------------------------------
// Mainly needed to support "on the fly" profile switching
NS_IMETHODIMP CTestEmbedApp::Observe(nsISupports *aSubject, const char *aTopic, const PRUnichar *someData)
{
nsresult rv = NS_OK;
if (nsCRT::strcmp(aTopic, "profile-approve-change") == 0)
{
// Ask the user if they want to
int result = MessageBox(NULL, "Do you want to close all windows in order to switch the profile?", "Confirm", MB_YESNO | MB_ICONQUESTION);
if (result != IDYES)
{
nsCOMPtr<nsIProfileChangeStatus> status = do_QueryInterface(aSubject);
NS_ENSURE_TRUE(status, NS_ERROR_FAILURE);
status->VetoChange();
}
}
else if (nsCRT::strcmp(aTopic, "profile-change-teardown") == 0)
{
// Close all open windows. Alternatively, we could just call CBrowserWindow::Stop()
// on each. Either way, we have to stop all network activity on this phase.
POSITION pos = m_FrameWndLst.GetHeadPosition();
while( pos != NULL )
{
CBrowserFrame *pBrowserFrame = (CBrowserFrame *) m_FrameWndLst.GetNext(pos);
if(pBrowserFrame)
{
pBrowserFrame->ShowWindow(false);
// Passing in FALSE below so that we do not
// kill the main app during a profile switch
RemoveFrameFromList(pBrowserFrame, FALSE);
pBrowserFrame->DestroyWindow();
}
}
}
else if (nsCRT::strcmp(aTopic, "profile-after-change") == 0)
{
InitializePrefs(); // In case we have just switched to a newly created profile.
// Only make a new browser window on a switch. This also gets
// called at start up and we already make a window then.
if (!nsCRT::strcmp(someData, NS_LITERAL_STRING("switch").get()))
OnNewBrowser();
}
return rv;
}
// ---------------------------------------------------------------------------
// CTestEmbedApp : nsIWindowCreator
// ---------------------------------------------------------------------------
NS_IMETHODIMP CTestEmbedApp::CreateChromeWindow(nsIWebBrowserChrome *parent,
PRUint32 chromeFlags,
nsIWebBrowserChrome **_retval)
{
// XXX we're ignoring the "parent" parameter
NS_ENSURE_ARG_POINTER(_retval);
*_retval = 0;
CBrowserFrame *pBrowserFrame = CreateNewBrowserFrame(chromeFlags);
if(pBrowserFrame) {
*_retval = NS_STATIC_CAST(nsIWebBrowserChrome *, pBrowserFrame->GetBrowserImpl());
NS_ADDREF(*_retval);
}
return NS_OK;
}
// AboutDlg Stuff
class CAboutDlg : public CDialog
{
public:
CAboutDlg();
enum { IDD = IDD_ABOUTBOX };
protected:
virtual void DoDataExchange(CDataExchange* pDX); // DDX/DDV support
protected:
DECLARE_MESSAGE_MAP()
};
CAboutDlg::CAboutDlg() : CDialog(CAboutDlg::IDD)
{
}
void CAboutDlg::DoDataExchange(CDataExchange* pDX)
{
CDialog::DoDataExchange(pDX);
}
BEGIN_MESSAGE_MAP(CAboutDlg, CDialog)
END_MESSAGE_MAP()
// Show the AboutDlg
void CTestEmbedApp::OnAppAbout()
{
CAboutDlg aboutDlg;
aboutDlg.DoModal();
}