gecko-dev/js/tests/js1_5/Regress/regress-350531.js

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is JavaScript Engine testing utilities.
 *
 * The Initial Developer of the Original Code is
 * Mozilla Foundation.
 * Portions created by the Initial Developer are Copyright (C) 2006
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s): Brendan Eich
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */
//-----------------------------------------------------------------------------
var bug = 350531;
var summary = 'exhaustively test parenthesization of binary operator subsets';
var actual = '';
var expect = '';


//-----------------------------------------------------------------------------
test();
//-----------------------------------------------------------------------------

function test()
{
  enterFunc ('test');
  printBugNumber (bug);
  printStatus (summary);
  
// Translated from permcomb.py, found at
// http://biotech.embl-ebi.ac.uk:8400/sw/common/share/python/examples/dstruct/classics/permcomb.py
// by searching for "permcomb.py".
//
// This shows bugs, gaps, and verbosities in JS compared to Python:
// 1. Lack of range([start, ] end[, step]).
// 2. ![] => false, indeed !<any-object> => false.
// 3. Missing append or push for strings (if append, then we'd want append for
//    arrays too).
// 4. Missing slice operator syntax s[i:j].
// 5. Lack of + for array concatenation.

  String.prototype.push = function (str) { return this + str; };

  function permute(list) {
    if (!list.length)                                   // shuffle any sequence
      return [list];                                    // empty sequence
    var res = [];
    for (var i = 0, n = list.length; i < n; i++) {      // delete current node
      var rest = list.slice(0, i).concat(list.slice(i+1));
      for each (var x in permute(rest))                 // permute the others
        res.push(list.slice(i, i+1).concat(x));         // add node at front
    }
    return res;
  }

  function subset(list, size) {
    if (size == 0 || !list.length)                      // order matters here
      return [list.slice(0, 0)];                        // an empty sequence
    var result = [];
    for (var i = 0, n = list.length; i < n; i++) {
      var pick = list.slice(i, i+1);                    // sequence slice
      var rest = list.slice(0, i).concat(list.slice(i+1)); // keep [:i] part
      for each (var x in subset(rest, size-1))
                 result.push(pick.concat(x));
    }
    return result;
  }

  function combo(list, size) {
    if (size == 0 || !list.length)                      // order doesn't matter
      return [list.slice(0, 0)];                        // xyz == yzx
    var result = [];
    for (var i = 0, n = (list.length - size) + 1; i < n; i++) {
      // iff enough left
      var pick = list.slice(i, i+1);
      var rest = list.slice(i+1);                       // drop [:i] part
      for each (var x in combo(rest, size - 1))
                 result.push(pick.concat(x));
    }
    return result;
  }


// Generate all subsets of distinct binary operators and join them from left
// to right, parenthesizing minimally.  Decompile, recompile, compress spaces
// and compare to test correct parenthesization.

//  load("permcomb.js");

  var bops = [
    ["=", "|=", "^=", "&=", "<<=", ">>=", ">>>=", "+=", "-=", "*=", "/=", "%="],
    ["||"],
    ["&&"],
    ["|"],
    ["^"],
    ["&"],
    ["==", "!=", "===", "!=="],
    ["<", "<=", ">=", ">", "in", "instanceof"],
    ["<<", ">>", ">>>"],
    ["+", "-"],
    ["*", "/", "%"],
    ];

  var prec = {};
  var aops = [];

  for (var i = 0; i < bops.length; i++) {
    for (var j = 0; j < bops[i].length; j++) {
      var k = bops[i][j];
      prec[k] = i;
      aops.push(k);
    }
  }

// Theoretically all subsets of size 2 should be enough to test, but in case
// there's some large-scale bug, try up to 5 (or higher? The cost in memory is
// factorially explosive).
next_subset:
  for (i = 2; i < 5; i++) {
    var sets = subset(aops, i);
    gc();

    for each (var set in sets) {
      print('for each set in sets: ' + (uneval(set)) );
      var src = "(function () {";
      for (j in set) {
        var op = set[j], op2 = set[j-1];

        // Precedence 0 is for assignment ops, which are right-
        // associative, so don't force left associativity using
        // parentheses.
        if (prec[op] && prec[op] < prec[op2])
          src += "(";
      }
      src += "x ";
      for (j in set) {
        var op = set[j], op2 = set[j+1];

        // Parenthesize only if not right-associative (precedence 0) and
        // the next op is higher precedence than current.
        var term = (prec[op] && prec[op] < prec[op2]) ? " x)" : " x";

        src += op + term;
        if (j < set.length - 1)
          src += " ";
      }
      src += ";})";
      try {
        var ref = uneval(eval(src)).replace(/\s+/g, ' ');
        if (ref != src) {
          actual += "BROKEN! input: " + src + " output: " + ref + " ";
          print("BROKEN! input: " + src + " output: " + ref);
          break next_subset;
        }
      } catch (e) {}
    }
  }

  reportCompare(expect, actual, summary);

  exitFunc ('test');
}