gecko-dev/widget/nsIPrintSettings.idl

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 4 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is mozilla.org code.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 2000
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Don Cone <dcone@netscape.com>
 *   Rod Spears <rods@netscape.com>
 *   Roland Mainz <roland.mainz@informatik.med.uni-giessen.de>
 *   Julien Lafon <julien.lafon@gmail.com>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either of the GNU General Public License Version 2 or later (the "GPL"),
 * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#include "nsISupports.idl"


%{ C++
#include "nsMargin.h"
#include "nsTArray.h"
%}

/**
 * Native types
 */
  [ref] native nsNativeIntMarginRef(nsIntMargin);
  [ref] native IntegerArray(nsTArray<PRInt32>);
  
interface nsIPrintSession;

/**
 * Simplified graphics interface for JS rendering.
 */
[scriptable, uuid(4404c94b-0506-4255-9e3c-4582dba6cfbb)]

interface nsIPrintSettings : nsISupports
{
  /**
   * PrintSettings to be Saved Navigation Constants
   */
  const unsigned long kInitSaveOddEvenPages   = 0x00000001;
  const unsigned long kInitSaveHeaderLeft     = 0x00000002;
  const unsigned long kInitSaveHeaderCenter   = 0x00000004;
  const unsigned long kInitSaveHeaderRight    = 0x00000008;
  const unsigned long kInitSaveFooterLeft     = 0x00000010;
  const unsigned long kInitSaveFooterCenter   = 0x00000020;
  const unsigned long kInitSaveFooterRight    = 0x00000040;
  const unsigned long kInitSaveBGColors       = 0x00000080;
  const unsigned long kInitSaveBGImages       = 0x00000100;
  const unsigned long kInitSavePaperSize      = 0x00000200;
  /* Flag 0x00000400 is unused */
  /* Flag 0x00000800 is unused */
  /* Flag 0x00001000 is unused */
  const unsigned long kInitSavePaperData      = 0x00002000;
  const unsigned long kInitSaveUnwriteableMargins = 0x00004000;
  const unsigned long kInitSaveEdges          = 0x00008000;

  const unsigned long kInitSaveReversed       = 0x00010000;
  const unsigned long kInitSaveInColor        = 0x00020000;
  const unsigned long kInitSaveOrientation    = 0x00040000;
  const unsigned long kInitSavePrintCommand   = 0x00080000;
  const unsigned long kInitSavePrinterName    = 0x00100000;
  const unsigned long kInitSavePrintToFile    = 0x00200000;
  const unsigned long kInitSaveToFileName     = 0x00400000;
  const unsigned long kInitSavePageDelay      = 0x00800000;
  const unsigned long kInitSaveMargins        = 0x01000000;
  const unsigned long kInitSaveNativeData     = 0x02000000;
  const unsigned long kInitSavePlexName       = 0x04000000;
  const unsigned long kInitSaveShrinkToFit    = 0x08000000;
  const unsigned long kInitSaveScaling        = 0x10000000;
  const unsigned long kInitSaveColorspace     = 0x20000000;
  const unsigned long kInitSaveResolutionName = 0x40000000;
  const unsigned long kInitSaveDownloadFonts  = 0x80000000;
  const unsigned long kInitSaveAll            = 0xFFFFFFFF;

  /* Print Option Flags for Bit Field*/
  const long kPrintOddPages     = 0x00000001;
  const long kPrintEvenPages    = 0x00000002;
  const long kEnableSelectionRB = 0x00000004;

  /* Print Range Enums */
  const long kRangeAllPages           = 0;
  const long kRangeSpecifiedPageRange = 1;
  const long kRangeSelection          = 2;
  const long kRangeFocusFrame         = 3;

  /* Justification Enums */
  const long kJustLeft   = 0;
  const long kJustCenter = 1;
  const long kJustRight  = 2;

  /**
   * FrameSet Default Type Constants
   */
  const short kUseInternalDefault    = 0;
  const short kUseSettingWhenPossible = 1;

  /**
   * Page Size Type Constants
   */
  const short kPaperSizeNativeData  = 0;
  const short kPaperSizeDefined     = 1;

  /**
   * Page Size Unit Constants
   */
  const short kPaperSizeInches      = 0;
  const short kPaperSizeMillimeters = 1;

  /**
   * Orientation Constants
   */
  const short kPortraitOrientation  = 0;
  const short kLandscapeOrientation = 1;

  /**
   * Print Frame Constants
   */
  const short kNoFrames      = 0;
  const short kFramesAsIs    = 1;
  const short kSelectedFrame = 2;
  const short kEachFrameSep  = 3;

  /**
   * How to Enable Frame Set Printing Constants
   */
  const short kFrameEnableNone        = 0;
  const short kFrameEnableAll         = 1;
  const short kFrameEnableAsIsAndEach = 2;

  /**
   * Output file format
   */
  const short kOutputFormatNative = 0;
  const short kOutputFormatPS     = 1;
  const short kOutputFormatPDF    = 2;

  /**
   * Set PrintOptions 
   */
  void SetPrintOptions(in PRInt32 aType, in boolean aTurnOnOff);

  /**
   * Get PrintOptions 
   */
  boolean GetPrintOptions(in PRInt32 aType);

  /**
   * Set PrintOptions Bit field
   */
  PRInt32 GetPrintOptionsBits();

  /**
   * Get the page size in twips, considering the
   * orientation (portrait or landscape).
   */
  void GetEffectivePageSize(out double aWidth, out double aHeight);

  /**
   * Makes a new copy
   */
    nsIPrintSettings clone();

  /**
   * Assigns the internal values from the "in" arg to the current object
   */
    void assign(in nsIPrintSettings aPS);

  /**
   * Data Members
   */
  [noscript] attribute nsIPrintSession printSession; /* We hold a weak reference */

  attribute long    startPageRange;    
  attribute long    endPageRange;    

  /**
   * The edge measurements define the positioning of the headers
   * and footers on the page. They're measured as an offset from
   * the "unwriteable margin" (described below).
   */
  attribute double  edgeTop;     /*  these are in inches */
  attribute double  edgeLeft;
  attribute double  edgeBottom;
  attribute double  edgeRight;

  /**
   * The margins define the positioning of the content on the page.
   * They're treated as an offset from the "unwriteable margin"
   * (described below).
   */
  attribute double  marginTop;     /*  these are in inches */
  attribute double  marginLeft;
  attribute double  marginBottom;
  attribute double  marginRight;
  /**
   * The unwriteable margin defines the printable region of the paper, creating
   * an invisible border from which the edge and margin attributes are measured.
   */
  attribute double  unwriteableMarginTop;     /*  these are in inches */
  attribute double  unwriteableMarginLeft;
  attribute double  unwriteableMarginBottom;
  attribute double  unwriteableMarginRight;

  attribute double  scaling;      /* values 0.0 - 1.0 */
  attribute boolean printBGColors; /* Print Background Colors */
  attribute boolean printBGImages; /* Print Background Images */

  attribute short   printRange; 

  attribute wstring title;
  attribute wstring docURL;

  attribute wstring headerStrLeft;
  attribute wstring headerStrCenter;
  attribute wstring headerStrRight;

  attribute wstring footerStrLeft;
  attribute wstring footerStrCenter;
  attribute wstring footerStrRight;

  attribute short   howToEnableFrameUI;  /* indicates how to enable the frameset UI            */
  attribute boolean isCancelled;         /* indicates whether the print job has been cancelled */
  attribute short   printFrameTypeUsage; /* indicates whether to use the interal value or not  */
  attribute short   printFrameType;
  attribute boolean printSilent;	     /* print without putting up the dialog */
  attribute boolean shrinkToFit;	     /* shrinks content to fit on page      */
  attribute boolean showPrintProgress;   /* indicates whether the progress dialog should be shown */

  /* Additional XP Related */
  attribute wstring paperName;     /* name of paper */
  attribute short   paperSizeType; /* use native data or is defined here */
  attribute short   paperData;     /* native data value */
  attribute double  paperWidth;    /* width of the paper in inches or mm */
  attribute double  paperHeight;   /* height of the paper in inches or mm */
  attribute short   paperSizeUnit; /* paper is in inches or mm */

  attribute wstring plexName;      /* name of plex mode (like "simplex", "duplex",
                                    * "tumble" and various custom values) */

  attribute wstring colorspace;    /* device-specific name of colorspace, overrides |printInColor| */
  attribute wstring resolutionName;/* device-specific identifer of resolution or quality
                                    * (like "600", "600x300", "600x300x12", "high-res",
                                    * "med-res". "low-res", etc.) */
  attribute boolean downloadFonts; /* enable font download to printer? */

  attribute boolean printReversed;
  attribute boolean printInColor;  /* a false means grayscale */
  attribute long    orientation;   /*  see orientation consts */
  attribute wstring printCommand;
  attribute long    numCopies;

  attribute wstring printerName;   /* name of destination printer */

  attribute boolean printToFile;
  attribute wstring toFileName;
  attribute short   outputFormat;

  attribute long    printPageDelay; /* in milliseconds */
  
  /* initialize helpers */
  /**
   * This attribute tracks whether the PS has been initialized 
   * from a printer specified by the "printerName" attr. 
   * If a different name is set into the "printerName" 
   * attribute than the one it was initialized with the PS
   * will then get intialized from that printer.
   */
  attribute boolean isInitializedFromPrinter;

  /**
   * This attribute tracks whether the PS has been initialized 
   * from prefs. If a different name is set into the "printerName" 
   * attribute than the one it was initialized with the PS
   * will then get intialized from prefs again.
   */
  attribute boolean isInitializedFromPrefs;

  /* C++ Helper Functions */
  [noscript] void SetMarginInTwips(in nsNativeIntMarginRef aMargin);
  [noscript] void SetEdgeInTwips(in nsNativeIntMarginRef aEdge);
  /* Purposely made this an "in" arg */
  [noscript] void GetMarginInTwips(in nsNativeIntMarginRef aMargin);
  [noscript] void GetEdgeInTwips(in nsNativeIntMarginRef aEdge);

  /**
   * We call this function so that anything that requires a run of the event loop
   * can do so safely. The print dialog runs the event loop but in silent printing
   * that doesn't happen.
   *
   * Either this or ShowPrintDialog (but not both) MUST be called by the print engine
   * before printing, otherwise printing can fail on some platforms.
   */
  [noscript] void SetupSilentPrinting();

  /**
   * Sets/Gets the "unwriteable margin" for the page format.  This defines
   * the boundary from which we'll measure the EdgeInTwips and MarginInTwips 
   * attributes, to place the headers and content, respectively.
   *
   * Note: Implementations of SetUnwriteableMarginInTwips should handle
   * negative margin values by falling back on the system default for
   * that margin.
   */
  [noscript] void SetUnwriteableMarginInTwips(in nsNativeIntMarginRef aEdge);
  [noscript] void GetUnwriteableMarginInTwips(in nsNativeIntMarginRef aEdge);
  
  /**
   * Get more accurate print ranges from the superior interval 
   * (startPageRange, endPageRange). The aPages array is populated with a 
   * list of pairs (start, end), where the endpoints are included. The print 
   * ranges (start, end), must not overlap and must be in the 
   * (startPageRange, endPageRange) scope.
   *
   * If there are no print ranges the aPages array is cleared.
   */
  [noscript] void GetPageRanges(in IntegerArray aPages);
};