gecko-dev/testing/mochitest/tests/SimpleTest/setup.js

318 lines
9.6 KiB
JavaScript

/* -*- Mode: Java; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* vim:set ts=2 sw=2 sts=2 et: */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is Mozilla Foundation.
* Portions created by the Initial Developer are Copyright (C) 2006
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Robert Sayre <sayrer@gmail.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
TestRunner.logEnabled = true;
TestRunner.logger = LogController;
/* Helper function */
parseQueryString = function(encodedString, useArrays) {
// strip a leading '?' from the encoded string
var qstr = (encodedString[0] == "?") ? encodedString.substring(1) :
encodedString;
var pairs = qstr.replace(/\+/g, "%20").split(/(\&amp\;|\&\#38\;|\&#x26;|\&)/);
var o = {};
var decode;
if (typeof(decodeURIComponent) != "undefined") {
decode = decodeURIComponent;
} else {
decode = unescape;
}
if (useArrays) {
for (var i = 0; i < pairs.length; i++) {
var pair = pairs[i].split("=");
if (pair.length !== 2) {
continue;
}
var name = decode(pair[0]);
var arr = o[name];
if (!(arr instanceof Array)) {
arr = [];
o[name] = arr;
}
arr.push(decode(pair[1]));
}
} else {
for (i = 0; i < pairs.length; i++) {
pair = pairs[i].split("=");
if (pair.length !== 2) {
continue;
}
o[decode(pair[0])] = decode(pair[1]);
}
}
return o;
};
// Check the query string for arguments
var params = parseQueryString(location.search.substring(1), true);
var config = {};
if (window.readConfig) {
config = readConfig();
}
if (config.testRoot == "chrome" || config.testRoot == "a11y") {
for (p in params) {
if (params[p] == 1) {
config[p] = true;
} else if (params[p] == 0) {
config[p] = false;
} else {
config[p] = params[p];
}
}
params = config;
}
// set the per-test timeout if specified in the query string
if (params.timeout) {
TestRunner.timeout = parseInt(params.timeout) * 1000;
}
// log levels for console and logfile
var fileLevel = params.fileLevel || null;
var consoleLevel = params.consoleLevel || null;
// loop tells us how many times to run the tests
if (params.repeat) {
TestRunner.repeat = params.repeat;
}
// closeWhenDone tells us to close the browser when complete
if (params.closeWhenDone) {
TestRunner.onComplete = SpecialPowers.quit;
}
// logFile to write our results
if (params.logFile) {
var spl = new SpecialPowersLogger(params.logFile);
TestRunner.logger.addListener("mozLogger", fileLevel + "", spl.getLogCallback());
}
// if we get a quiet param, don't log to the console
if (!params.quiet) {
function dumpListener(msg) {
dump(msg.num + " " + msg.level + " " + msg.info.join(' ') + "\n");
}
TestRunner.logger.addListener("dumpListener", consoleLevel + "", dumpListener);
}
var gTestList = [];
var RunSet = {}
RunSet.runall = function(e) {
// Filter tests to include|exclude tests based on data in params.filter.
// This allows for including or excluding tests from the gTestList
gTestList = filterTests(params.runOnlyTests, params.excludeTests);
// Which tests we're going to run
var my_tests = gTestList;
if (params.totalChunks && params.thisChunk) {
var total_chunks = parseInt(params.totalChunks);
// this_chunk is in the range [1,total_chunks]
var this_chunk = parseInt(params.thisChunk);
// We want to split the tests up into chunks according to which directory
// they're in
if (params.chunkByDir) {
var chunkByDir = parseInt(params.chunkByDir);
var tests_by_dir = {};
var test_dirs = []
for (var i = 0; i < gTestList.length; ++i) {
var test_path = gTestList[i];
if (test_path[0] == '/') {
test_path = test_path.substr(1);
}
var dir = test_path.split("/");
// We want the first chunkByDir+1 components, or everything but the
// last component, whichever is less.
// we add 1 to chunkByDir since 'tests' is always part of the path, and
// want to ignore the last component since it's the test filename.
dir = dir.slice(0, Math.min(chunkByDir+1, dir.length-1));
// reconstruct a directory name
dir = dir.join("/");
if (!(dir in tests_by_dir)) {
tests_by_dir[dir] = [gTestList[i]];
test_dirs.push(dir);
} else {
tests_by_dir[dir].push(gTestList[i]);
}
}
var tests_per_chunk = test_dirs.length / total_chunks;
var start = Math.round((this_chunk-1) * tests_per_chunk);
var end = Math.round(this_chunk * tests_per_chunk);
my_tests = [];
var dirs = []
for (var i = start; i < end; ++i) {
var dir = test_dirs[i];
dirs.push(dir);
my_tests = my_tests.concat(tests_by_dir[dir]);
}
TestRunner.logger.log("Running tests in " + dirs.join(", "));
} else {
var tests_per_chunk = gTestList.length / total_chunks;
var start = Math.round((this_chunk-1) * tests_per_chunk);
var end = Math.round(this_chunk * tests_per_chunk);
my_tests = gTestList.slice(start, end);
TestRunner.logger.log("Running tests " + (start+1) + "-" + end + "/" + gTestList.length);
}
}
if (params.shuffle) {
for (var i = my_tests.length-1; i > 0; --i) {
var j = Math.floor(Math.random() * i);
var tmp = my_tests[j];
my_tests[j] = my_tests[i];
my_tests[i] = tmp;
}
}
TestRunner.runTests(my_tests);
}
RunSet.reloadAndRunAll = function(e) {
e.preventDefault();
//window.location.hash = "";
var addParam = "";
if (params.autorun) {
window.location.search += "";
window.location.href = window.location.href;
} else if (window.location.search) {
window.location.href += "&autorun=1";
} else {
window.location.href += "?autorun=1";
}
};
// Test Filtering Code
// Open the file referenced by runOnly|exclude and use that to compare against
// gTestList. Return a modified version of gTestList
function filterTests(runOnly, exclude) {
var filteredTests = [];
var filterFile = null;
if (runOnly) {
filterFile = runOnly;
} else if (exclude) {
filterFile = exclude;
}
if (filterFile == null)
return gTestList;
var datafile = "http://mochi.test:8888/" + filterFile;
var objXml = new XMLHttpRequest();
objXml.open("GET",datafile,false);
objXml.send(null);
try {
var filter = JSON.parse(objXml.responseText);
} catch (ex) {
dump("INFO | setup.js | error loading or parsing '" + datafile + "'\n");
return gTestList;
}
for (var i = 0; i < gTestList.length; ++i) {
var test_path = gTestList[i];
//We use tmp_path to remove leading '/'
var tmp_path = test_path.replace(/^\//, '');
var found = false;
for (var f in filter) {
// Remove leading /tests/ if exists
file = f.replace(/^\//, '')
file = file.replace(/^tests\//, '')
// Match directory or filename, gTestList has tests/<path>
if (tmp_path.match("^tests/" + file) != null) {
if (runOnly)
filteredTests.push(test_path);
found = true;
break;
}
}
if (exclude && !found)
filteredTests.push(test_path);
}
return filteredTests;
}
// UI Stuff
function toggleVisible(elem) {
toggleElementClass("invisible", elem);
}
function makeVisible(elem) {
removeElementClass(elem, "invisible");
}
function makeInvisible(elem) {
addElementClass(elem, "invisible");
}
function isVisible(elem) {
// you may also want to check for
// getElement(elem).style.display == "none"
return !hasElementClass(elem, "invisible");
};
function toggleNonTests (e) {
e.preventDefault();
var elems = document.getElementsClassName("non-test");
for (var i="0"; i<elems.length; i++) {
toggleVisible(elems[i]);
}
if (isVisible(elems[0])) {
$("toggleNonTests").innerHTML = "Hide Non-Tests";
} else {
$("toggleNonTests").innerHTML = "Show Non-Tests";
}
}
// hook up our buttons
function hookup() {
document.getElementById('runtests').onclick = RunSet.reloadAndRunAll;
document.getElementById('toggleNonTests').onclick = toggleNonTests;
// run automatically if autorun specified
if (params.autorun) {
RunSet.runall();
}
}