PCSX2/pcsx2
1
0
Fork 0
mirror of https://github.com/PCSX2/pcsx2.git synced 2024-11-27 11:30:45 +00:00
Code Issues Actions 8 Packages Projects Releases Wiki Activity

clang format: set SpacesBeforeTrailingComments to 1

Browse Source
This commit is contained in:
Clang Format 2016-10-16 21:39:56 +02:00 committed by Gregory Hainaut
parent 8945ace3f7
commit 604d3bac3c
87 changed files with 1139 additions and 1139 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
.clang-format
View File

@ -77,7 +77,7 @@ SpaceAfterCStyleCast: false
SpaceBeforeAssignmentOperators: true
SpaceBeforeParens: ControlStatements
SpaceInEmptyParentheses: false
SpacesBeforeTrailingComments: 2
SpacesBeforeTrailingComments: 1
SpacesInAngles: false
SpacesInContainerLiterals: true
SpacesInCStyleCastParentheses: false

14
plugins/FWnull/FW.cpp
View File

@ -25,7 +25,7 @@ using namespace std;
const u8 version = PS2E_FW_VERSION;
const u8 revision = 0;
const u8 build = 7; // increase that with each version
const u8 build = 7; // increase that with each version
#ifdef _MSC_VER
#define snprintf sprintf_s
@ -140,7 +140,7 @@ void PHYRead()
PHYACC |= phyregs[reg] | (reg << 8);
if (fwRu32(0x8424) & 0x40000000) //RRx interrupt mask
if (fwRu32(0x8424) & 0x40000000) //RRx interrupt mask
{
fwRu32(0x8420) |= 0x40000000;
FWirq();
@ -158,7 +158,7 @@ FWread32(u32 addr)
break;
// Control Register 2
case 0x1f808410:
ret = fwRu32(addr); //SCLK OK (Needs to be set when FW is "Ready"
ret = fwRu32(addr); //SCLK OK (Needs to be set when FW is "Ready"
break;
//Interrupt 0 Register
case 0x1f808420:
@ -201,11 +201,11 @@ FWwrite32(u32 addr, u32 value)
case 0x1f808414:
//If in read mode (top bit set) we read the PHY register requested then set the RRx interrupt if it's enabled
//Im presuming we send that back to pcsx2 then. This register stores the result, plus whatever was written (minus the read/write flag
fwRu32(addr) = value; //R/W Bit cleaned in underneath function
if (value & 0x40000000) //Writing to PHY
fwRu32(addr) = value; //R/W Bit cleaned in underneath function
if (value & 0x40000000) //Writing to PHY
{
PHYWrite();
} else if (value & 0x80000000) //Reading from PHY
} else if (value & 0x80000000) //Reading from PHY
{
PHYRead();
}
@ -231,7 +231,7 @@ FWwrite32(u32 addr, u32 value)
fwRu32(addr) &= ~0x800000;
break;
//Control Register 2
case 0x1f808410: // fwRu32(addr) = value; break;
case 0x1f808410: // fwRu32(addr) = value; break;
//Ignore writes to this for now, apart from 0x2 which is Link Power Enable
//0x8 is SCLK OK (Ready) which should be set for emulation
fwRu32(addr) = 0x8 /*| value & 0x2*/;

6
plugins/FWnull/Windows/Config.cpp
View File

@ -50,12 +50,12 @@ void LoadConfig()
if (!szTemp)
return;
strcpy(szTemp, "\\inis\\fwnull.ini");
fp = fopen("inis\\fwnull.ini", "rt"); //check if firewirenull.ini really exists
fp = fopen("inis\\fwnull.ini", "rt"); //check if firewirenull.ini really exists
if (!fp) {
CreateDirectory("inis", NULL);
memset(&conf, 0, sizeof(conf));
conf.Log = 0; //default value
SaveConfig(); //save and return
conf.Log = 0; //default value
SaveConfig(); //save and return
return;
}
fclose(fp);

4
plugins/FWnull/Windows/Win32.cpp
View File

@ -94,10 +94,10 @@ void CALLBACK FWabout()
(DLGPROC)AboutDlgProc);
}
BOOL APIENTRY DllMain(HANDLE hModule, // DLL INIT
BOOL APIENTRY DllMain(HANDLE hModule, // DLL INIT
DWORD dwReason,
LPVOID lpReserved)
{
hInst = (HINSTANCE)hModule;
return TRUE; // very quick :)
return TRUE; // very quick :)
}

2
plugins/GSnull/GS.cpp
View File

@ -33,7 +33,7 @@ using namespace std;
const unsigned char version = PS2E_GS_VERSION;
const unsigned char revision = 0;
const unsigned char build = 1; // increase that with each version
const unsigned char build = 1; // increase that with each version
static char libraryName[256];
Config conf;

10
plugins/GSnull/GifTransfer.cpp
View File

@ -63,7 +63,7 @@ void _GSgifTransfer(const u32 *pMem, u32 size)
do {
GIFPackedRegHandlerA_D(pMem);
pMem += 4; //sizeof(GIFPackedReg)/4;
pMem += 4; //sizeof(GIFPackedReg)/4;
} while (--path->nloop > 0);
break;
}
@ -72,7 +72,7 @@ void _GSgifTransfer(const u32 *pMem, u32 size)
u32 reg = path->GetReg();
GIFPackedRegHandlers[reg](pMem);
pMem += 4; //sizeof(GIFPackedReg)/4;
pMem += 4; //sizeof(GIFPackedReg)/4;
size--;
} while (path->StepReg() && (size > 0));
@ -97,8 +97,8 @@ void _GSgifTransfer(const u32 *pMem, u32 size)
break;
}
case GIF_FLG_IMAGE: // FROM_VFRAM
case GIF_FLG_IMAGE2: // Used in the DirectX version, so we'll use it here too.
case GIF_FLG_IMAGE: // FROM_VFRAM
case GIF_FLG_IMAGE2: // Used in the DirectX version, so we'll use it here too.
{
int len = min(size, path->nloop);
//GSLog::Writeln("GIF_FLG_IMAGE(%d)=%d", gs.imageTransfer, len);
@ -136,7 +136,7 @@ void _GSgifTransfer(const u32 *pMem, u32 size)
break;
}
default: // GIF_IMAGE
default: // GIF_IMAGE
GSLog::WriteLn("*** WARNING **** Unexpected GIFTag flag.");
assert(0);
path->nloop = 0;

4
plugins/GSnull/GifTransfer.h
View File

@ -42,7 +42,7 @@ union GIFTag
u32 _PAD2 : 14;
u32 PRE : 1;
u32 PRIM : 11;
u32 FLG : 2; // enum GIF_FLG
u32 FLG : 2; // enum GIF_FLG
u32 NREG : 4;
u64 REGS : 64;
};
@ -129,4 +129,4 @@ template <int index>
extern void _GSgifTransfer(const u32 *pMem, u32 size);
extern GIFRegHandler GIFPackedRegHandlers[];
extern GIFRegHandler GIFRegHandlers[];
#endif // GIFTRANSFER_H_INCLUDED
#endif // GIFTRANSFER_H_INCLUDED

2
plugins/GSnull/Linux/Config.cpp
View File

@ -43,7 +43,7 @@ void LoadConfig()
if (!Ini.Open(iniFile, READ_FILE)) {
printf("failed to open %s\n", iniFile.c_str());
SaveConfig(); //save and return
SaveConfig(); //save and return
return;
}

46
plugins/GSnull/Registers.h
View File

@ -225,19 +225,19 @@ enum GS_PRIM_CLASS {
};
enum GS_PSM {
PSM_PSMCT32 = 0, // 0000-0000
PSM_PSMCT24 = 1, // 0000-0001
PSM_PSMCT16 = 2, // 0000-0010
PSM_PSMCT16S = 10, // 0000-1010
PSM_PSMT8 = 19, // 0001-0011
PSM_PSMT4 = 20, // 0001-0100
PSM_PSMT8H = 27, // 0001-1011
PSM_PSMT4HL = 36, // 0010-0100
PSM_PSMT4HH = 44, // 0010-1100
PSM_PSMZ32 = 48, // 0011-0000
PSM_PSMZ24 = 49, // 0011-0001
PSM_PSMZ16 = 50, // 0011-0010
PSM_PSMZ16S = 58, // 0011-1010
PSM_PSMCT32 = 0, // 0000-0000
PSM_PSMCT24 = 1, // 0000-0001
PSM_PSMCT16 = 2, // 0000-0010
PSM_PSMCT16S = 10, // 0000-1010
PSM_PSMT8 = 19, // 0001-0011
PSM_PSMT4 = 20, // 0001-0100
PSM_PSMT8H = 27, // 0001-1011
PSM_PSMT4HL = 36, // 0010-0100
PSM_PSMT4HH = 44, // 0010-1100
PSM_PSMZ32 = 48, // 0011-0000
PSM_PSMZ24 = 49, // 0011-0001
PSM_PSMZ16 = 50, // 0011-0010
PSM_PSMZ16S = 58, // 0011-1010
};
enum GS_TFX {
@ -385,7 +385,7 @@ u32 wREV : 8;
u32 wID : 8;
REG_END
REG64_(GSReg, DISPFB) // (-1/2)
REG64_(GSReg, DISPFB) // (-1/2)
u32 FBP : 9;
u32 FBW : 6;
u32 PSM : 5;
@ -397,7 +397,7 @@ REG_END2
u32 Block() const { return FBP << 5; }
REG_END2
REG64_(GSReg, DISPLAY) // (-1/2)
REG64_(GSReg, DISPLAY) // (-1/2)
u32 DX : 12;
u32 DY : 11;
u32 MAGH : 4;
@ -491,7 +491,7 @@ u32 SINT : 1;
u32 XPCK : 1;
u32 PCK2 : 2;
u32 SPML : 4;
u32 GCONT : 1; // YCrCb
u32 GCONT : 1; // YCrCb
u32 PHS : 1;
u32 PVS : 1;
u32 PEHS : 1;
@ -840,9 +840,9 @@ u32 ZTST : 2;
u32 _PAD1 : 13;
u32 _PAD2 : 32;
REG_END2
__forceinline bool DoFirstPass() { return !ATE || ATST != ATST_NEVER; } // not all pixels fail automatically
__forceinline bool DoSecondPass() { return ATE && ATST != ATST_ALWAYS && AFAIL != AFAIL_KEEP; } // pixels may fail, write fb/z
__forceinline bool NoSecondPass() { return ATE && ATST != ATST_ALWAYS && AFAIL == AFAIL_KEEP; } // pixels may fail, no output
__forceinline bool DoFirstPass() { return !ATE || ATST != ATST_NEVER; } // not all pixels fail automatically
__forceinline bool DoSecondPass() { return ATE && ATST != ATST_ALWAYS && AFAIL != AFAIL_KEEP; } // pixels may fail, write fb/z
__forceinline bool NoSecondPass() { return ATE && ATST != ATST_ALWAYS && AFAIL == AFAIL_KEEP; } // pixels may fail, no output
REG_END2
REG64_(GIFReg, TEX0)
@ -886,7 +886,7 @@ u32 MTBA : 1;
u32 _PAD2 : 9;
u32 L : 2;
u32 _PAD3 : 11;
s32 K : 12; // 1:7:4
s32 K : 12; // 1:7:4
u32 _PAD4 : 20;
REG_END2
bool IsMinLinear() const { return (MMIN == 1) || (MMIN & 4); }
@ -966,8 +966,8 @@ REG_END
// GSState::GIFRegHandlerXYOFFSET will make sure that the _PAD1/2 bits are set to zero
REG64_(GIFReg, XYOFFSET)
u32 OFX; // :16; u32 _PAD1:16;
u32 OFY; // :16; u32 _PAD2:16;
u32 OFX; // :16; u32 _PAD1:16;
u32 OFY; // :16; u32 _PAD2:16;
REG_END
REG64_(GIFReg, XYZ)
@ -1129,7 +1129,7 @@ REG_END
REG128_(GIFPacked, A_D)
u64 DATA : 64;
u32 ADDR : 8; // enum GIF_A_D_REG
u32 ADDR : 8; // enum GIF_A_D_REG
u32 _PAD1 : 24;
u32 _PAD2 : 32;
REG_END

6
plugins/GSnull/Windows/Config.cpp
View File

@ -50,13 +50,13 @@ void LoadConfig()
if (!szTemp)
return;
strcpy(szTemp, "\\inis\\gsnull.ini");
fp = fopen("inis\\gsnull.ini", "rt"); //check if gsnull.ini really exists
fp = fopen("inis\\gsnull.ini", "rt"); //check if gsnull.ini really exists
if (!fp) {
CreateDirectory("inis", NULL);
memset(&conf, 0, sizeof(conf));
conf.Log = 0; //default value
SaveConfig(); //save and return
conf.Log = 0; //default value
SaveConfig(); //save and return
return;
}

4
plugins/GSnull/Windows/Win32.cpp
View File

@ -97,10 +97,10 @@ GSabout()
(DLGPROC)AboutDlgProc);
}
BOOL APIENTRY DllMain(HANDLE hModule, // DLL INIT
BOOL APIENTRY DllMain(HANDLE hModule, // DLL INIT
DWORD dwReason,
LPVOID lpReserved)
{
hInst = (HINSTANCE)hModule;
return TRUE; // very quick :)
return TRUE; // very quick :)
}

20
plugins/LilyPad/Config.cpp
View File

@ -40,10 +40,10 @@ const wchar_t *padTypes[] = {
// Hacks or configurations which PCSX2 needs with a specific value
void PCSX2_overrideConfig(GeneralConfig &config_in_out)
{
config_in_out.disableScreenSaver = 0; // Not required - handled internally by PCSX2
config_in_out.escapeFullscreenHack = 0; // Not required - handled internally by PCSX2
config_in_out.saveStateTitle = 0; // Not required - handled internally by PCSX2
config_in_out.closeHacks = 0; // Cannot function when used by PCSX2
config_in_out.disableScreenSaver = 0; // Not required - handled internally by PCSX2
config_in_out.escapeFullscreenHack = 0; // Not required - handled internally by PCSX2
config_in_out.saveStateTitle = 0; // Not required - handled internally by PCSX2
config_in_out.closeHacks = 0; // Cannot function when used by PCSX2
}
// Dialog widgets which should be disabled - mostly matching PCSX2_overrideConfig
@ -53,7 +53,7 @@ const UINT *PCSX2_disabledWidgets()
IDC_DISABLE_SCREENSAVER,
IDC_ESCAPE_FULLSCREEN_HACK,
IDC_SAVE_STATE_TITLE,
IDC_ANALOG_START1, // start in analog mode - only useful for PS1
IDC_ANALOG_START1, // start in analog mode - only useful for PS1
IDC_CLOSE_HACK1,
IDC_CLOSE_HACK2,
0};
@ -102,11 +102,11 @@ const GeneralSettingsBool BoolOptionsInfo[] = {
{L"Multitap 1", IDC_MULTITAP1, 0},
{L"Multitap 2", IDC_MULTITAP2, 0},
{L"Escape Fullscreen Hack", IDC_ESCAPE_FULLSCREEN_HACK, 1}, // Not required for PCSX2
{L"Disable Screen Saver", IDC_DISABLE_SCREENSAVER, 1}, // Not required for PCSX2
{L"Escape Fullscreen Hack", IDC_ESCAPE_FULLSCREEN_HACK, 1}, // Not required for PCSX2
{L"Disable Screen Saver", IDC_DISABLE_SCREENSAVER, 1}, // Not required for PCSX2
{L"Logging", IDC_DEBUG_FILE, 0},
{L"Save State in Title", IDC_SAVE_STATE_TITLE, 0}, // Not required for PCSX2
{L"Save State in Title", IDC_SAVE_STATE_TITLE, 0}, // Not required for PCSX2
{L"GH2", IDC_GH2_HACK, 0},
{L"Turbo Key Hack", IDC_TURBO_KEY_HACK, 0},
};
@ -339,7 +339,7 @@ void CALLBACK PADsetSettingsDir(const char *dir)
FILE *temp = nullptr;
_wfopen_s(&temp, iniFile, L"r");
if (!temp) { // File not found, possibly.
if (!temp) { // File not found, possibly.
HRSRC res = FindResource(hInst, MAKEINTRESOURCE(IDR_INI1), RT_RCDATA);
if (!res)
return;
@ -1642,7 +1642,7 @@ INT_PTR CALLBACK DialogProc(HWND hWnd, unsigned int msg, WPARAM wParam, LPARAM l
SetTimer(hWnd, 1, 3000, 0);
}
}
} else if ((cmd >= ID_LOCK_BUTTONS && cmd <= ID_ANALOG) || cmd == ID_IGNORE) { // || cmd == ID_FORCE_FEEDBACK) {
} else if ((cmd >= ID_LOCK_BUTTONS && cmd <= ID_ANALOG) || cmd == ID_IGNORE) { // || cmd == ID_FORCE_FEEDBACK) {
// Messes up things, unfortunately.
// End binding on a bunch of notification messages, and
// this will send a bunch.

4
plugins/LilyPad/Global.h
View File

@ -26,7 +26,7 @@ typedef uint16_t USHORT;
typedef int64_t __int64;
#endif
#define MAX_PATH (256) // random value
#define MAX_PATH (256) // random value
#include <X11/keysym.h>
@ -78,7 +78,7 @@ static inline unsigned int timeGetTime()
struct timeval now;
gettimeofday(&now, NULL);
uint64_t ms = (now.tv_usec / 1000) + ((uint64_t)now.tv_sec * 1000);
return (ms & 0xFFFFFFFF); // MS code is u32 ...
return (ms & 0xFFFFFFFF); // MS code is u32 ...
}
#include "Utilities/Dependencies.h"

12
plugins/LilyPad/LilyPad.cpp
View File

@ -385,9 +385,9 @@ void ProcessButtonBinding(Binding *b, ButtonSum *sum, int value)
if (value < b->deadZone || !value)
return;
if (config.turboKeyHack == 1) { // send a tabulator keypress to emulator
if (config.turboKeyHack == 1) { // send a tabulator keypress to emulator
//printf("%x\n", b->command);
if (b->command == 0x11) { // L3 button
if (b->command == 0x11) { // L3 button
static unsigned int LastCheck = 0;
unsigned int t = timeGetTime();
if (t - LastCheck < 300)
@ -1262,10 +1262,10 @@ u8 CALLBACK PADpoll(u8 value)
//query.response[4] &= pad->mask[1];
// No need to cap these, already done int CapSum().
query.response[9] = (unsigned char)sum->buttons[13]; //D-pad right
query.response[10] = (unsigned char)sum->buttons[15]; //D-pad left
query.response[11] = (unsigned char)sum->buttons[12]; //D-pad up
query.response[12] = (unsigned char)sum->buttons[14]; //D-pad down
query.response[9] = (unsigned char)sum->buttons[13]; //D-pad right
query.response[10] = (unsigned char)sum->buttons[15]; //D-pad left
query.response[11] = (unsigned char)sum->buttons[12]; //D-pad up
query.response[12] = (unsigned char)sum->buttons[14]; //D-pad down
query.response[13] = (unsigned char)sum->buttons[8];
query.response[14] = (unsigned char)sum->buttons[9];

6
plugins/LilyPad/Linux/Config.cpp
View File

@ -210,7 +210,7 @@ const GeneralSettingsBool BoolOptionsInfo[] = {
{L"Disable Screen Saver", 0 /*IDC_DISABLE_SCREENSAVER*/, 1},
{L"Logging", 0 /*IDC_DEBUG_FILE*/, 0},
{L"Save State in Title", 0 /*IDC_SAVE_STATE_TITLE*/, 0}, //No longer required, PCSX2 now handles it - avih 2011-05-17
{L"Save State in Title", 0 /*IDC_SAVE_STATE_TITLE*/, 0}, //No longer required, PCSX2 now handles it - avih 2011-05-17
{L"GH2", 0 /*IDC_GH2_HACK*/, 0},
{L"Turbo Key Hack", 0 /*IDC_TURBO_KEY_HACK*/, 0},
};
@ -461,7 +461,7 @@ int LoadSettings(int force, wchar_t *file)
config.multipleBinding = multipleBinding;
//TODO RefreshEnabledDevicesAndDisplay(1);
RefreshEnabledDevices(1); // XXX For the moment only a subfonction
RefreshEnabledDevices(1); // XXX For the moment only a subfonction
return 0;
}
@ -495,7 +495,7 @@ void RefreshEnabledDevices(int updateDeviceList)
}
dm->EnableDevice(i);
#if 0 // windows magic?
#if 0 // windows magic?
if ((dev->type == KEYBOARD && dev->api == IGNORE_KEYBOARD) ||
(dev->type == KEYBOARD && dev->api == config.keyboardApi) ||
(dev->type == MOUSE && dev->api == config.mouseApi) ||

2
plugins/LilyPad/Linux/JoyEvdev.cpp
View File

@ -49,7 +49,7 @@ JoyEvdev::JoyEvdev(int fd, bool ds3, const wchar_t *id)
// Add Absolute axis
if (ioctl(fd, EVIOCGBIT(EV_ABS, sizeof(abs_bitmap)), abs_bitmap) >= 0) {
for (int bit = 0; bit < ABS_CNT; bit++) {
ControlType type = ABSAXIS; // FIXME DS3
ControlType type = ABSAXIS; // FIXME DS3
if (testBit(bit, abs_bitmap)) {
input_absinfo info;

2
plugins/LilyPad/Linux/KeyboardMouse.cpp
View File

@ -72,7 +72,7 @@ int LinuxKeyboard::Update()
}
}
return status; // XXX ????
return status; // XXX ????
}
void EnumLnx()

28
plugins/LilyPad/VKey.cpp
View File

@ -28,20 +28,20 @@ wchar_t *GetVKStringW(unsigned char vk)
case 0x13:
return L"Pause";
case 0x21: // return "Page Up";
case 0x22: // return "Page Down";
case 0x23: // return "End";
case 0x24: // return "Home";
case 0x25: // return "Left";
case 0x26: // return "Up";
case 0x27: // return "Right";
case 0x28: // return "Down";
case 0x2D: // return "Insert";
case 0x2E: // return "Delete";
case 0x5B: // return "Left Windows";
case 0x5C: // return "Right Windows";
case 0x5D: // return "Application";
case 0x6F: // return "Num /";
case 0x21: // return "Page Up";
case 0x22: // return "Page Down";
case 0x23: // return "End";
case 0x24: // return "Home";
case 0x25: // return "Left";
case 0x26: // return "Up";
case 0x27: // return "Right";
case 0x28: // return "Down";
case 0x2D: // return "Insert";
case 0x2E: // return "Delete";
case 0x5B: // return "Left Windows";
case 0x5C: // return "Right Windows";
case 0x5D: // return "Application";
case 0x6F: // return "Num /";
flag = 1 << 24;
break;

4
plugins/LilyPad/XInputEnum.cpp
View File

@ -100,7 +100,7 @@ public:
memset(&xInputVibration, 0, sizeof(xInputVibration));
this->index = index;
int i;
for (i = 0; i < 17; i++) { // Skip empty bit
for (i = 0; i < 17; i++) { // Skip empty bit
AddPhysicalControl(PRESSURE_BTN, i + (i > 10), 0);
}
for (; i < 21; i++) {
@ -282,7 +282,7 @@ void EnumXInputDevices()
if (hMod) {
if ((pXInputEnable = (_XInputEnable)GetProcAddress(hMod, "XInputEnable")) &&
((pXInputGetStateEx = (_XInputGetStateEx)GetProcAddress(hMod, (LPCSTR)100)) || // Try Ex version first
((pXInputGetStateEx = (_XInputGetStateEx)GetProcAddress(hMod, (LPCSTR)100)) || // Try Ex version first
(pXInputGetStateEx = (_XInputGetStateEx)GetProcAddress(hMod, "XInputGetState")))) {
pXInputGetExtended = (_XInputGetExtended)GetProcAddress(hMod, "XInputGetExtended");
pXInputSetState = (_XInputSetState)GetProcAddress(hMod, "XInputSetState");

2
plugins/SPU2null/Linux/Config.cpp
View File

@ -44,7 +44,7 @@ void LoadConfig()
if (!Ini.Open(iniFile, READ_FILE)) {
printf("failed to open %s\n", iniFile.c_str());
SaveConfig(); //save and return
SaveConfig(); //save and return
return;
}

154
plugins/SPU2null/SPU2.cpp
View File

@ -25,8 +25,8 @@ using namespace std;
const u8 version = PS2E_SPU2_VERSION;
const u8 revision = 0;
const u8 build = 8; // increase that with each version
const u32 minor = 0; // increase that with each version
const u8 build = 8; // increase that with each version
const u32 minor = 0; // increase that with each version
// ADSR constants
#define ATTACK_MS 494L
@ -55,8 +55,8 @@ u16 interrupt = 0;
s8 *spu2regs = NULL;
u16 *spu2mem = NULL;
u16 *pSpuIrq[2] = {NULL};
u32 dwEndChannel2[2] = {0}; // keeps track of what channels have ended
u32 dwNoiseVal = 1; // global noise generator
u32 dwEndChannel2[2] = {0}; // keeps track of what channels have ended
u32 dwNoiseVal = 1; // global noise generator
s32 SPUCycles = 0, SPUWorkerCycles = 0;
s32 SPUStartCycle[2];
@ -67,9 +67,9 @@ int ADMAS7Write();
void InitADSR();
void (*irqCallbackSPU2)(); // func of main emu, called on spu irq
void (*irqCallbackDMA4)() = 0; // func of main emu, called on spu irq
void (*irqCallbackDMA7)() = 0; // func of main emu, called on spu irq
void (*irqCallbackSPU2)(); // func of main emu, called on spu irq
void (*irqCallbackDMA4)() = 0; // func of main emu, called on spu irq
void (*irqCallbackDMA7)() = 0; // func of main emu, called on spu irq
const s32 f[5][2] = {
{0, 0},
@ -81,7 +81,7 @@ const s32 f[5][2] = {
u32 RateTable[160];
// channels and voices
VOICE_PROCESSED voices[SPU_NUMBER_VOICES + 1]; // +1 for modulation
VOICE_PROCESSED voices[SPU_NUMBER_VOICES + 1]; // +1 for modulation
EXPORT_C_(u32)
PS2EgetLibType()
@ -167,7 +167,7 @@ SPU2init()
}
memset(spu2regs, 0, 0x10000);
spu2mem = (u16 *)malloc(0x200000); // 2Mb
spu2mem = (u16 *)malloc(0x200000); // 2Mb
if (spu2mem == NULL) {
SysMessage("Error allocating Memory\n");
return -1;
@ -188,7 +188,7 @@ SPU2init()
voices[i].pLoop = voices[i].pStart = voices[i].pCurr = (u8 *)spu2mem;
voices[i].pvoice = (_SPU_VOICE *)((u8 *)spu2regs + voices[i].memoffset) + (i % 24);
voices[i].ADSRX.SustainLevel = 1024; // -> init sustain
voices[i].ADSRX.SustainLevel = 1024; // -> init sustain
}
return 0;
@ -259,17 +259,17 @@ SPU2async(u32 cycle)
}
}
void InitADSR() // INIT ADSR
void InitADSR() // INIT ADSR
{
u32 r, rs, rd;
s32 i;
memset(RateTable, 0, sizeof(u32) * 160); // build the rate table according to Neill's rules (see at bottom of file)
memset(RateTable, 0, sizeof(u32) * 160); // build the rate table according to Neill's rules (see at bottom of file)
r = 3;
rs = 1;
rd = 0;
for (i = 32; i < 160; i++) // we start at pos 32 with the real values... everything before is 0
for (i = 32; i < 160; i++) // we start at pos 32 with the real values... everything before is 0
{
if (r < 0x3FFFFFFF) {
r += rs;
@ -286,9 +286,9 @@ void InitADSR() // INIT ADSR
}
}
int MixADSR(VOICE_PROCESSED *pvoice) // MIX ADSR
int MixADSR(VOICE_PROCESSED *pvoice) // MIX ADSR
{
if (pvoice->bStop) // should be stopped:
if (pvoice->bStop) // should be stopped:
{
if (pvoice->bIgnoreLoop == 0) {
pvoice->ADSRX.EnvelopeVol = 0;
@ -300,7 +300,7 @@ int MixADSR(VOICE_PROCESSED *pvoice) // MIX ADSR
pvoice->bIgnoreLoop = false;
return 0;
}
if (pvoice->ADSRX.ReleaseModeExp) // do release
if (pvoice->ADSRX.ReleaseModeExp) // do release
{
switch ((pvoice->ADSRX.EnvelopeVol >> 28) & 0x7) {
case 0:
@ -347,9 +347,9 @@ int MixADSR(VOICE_PROCESSED *pvoice) // MIX ADSR
pvoice->ADSRX.lVolume = pvoice->ADSRX.EnvelopeVol >> 21;
pvoice->ADSRX.lVolume = pvoice->ADSRX.EnvelopeVol >> 21;
return pvoice->ADSRX.lVolume;
} else // not stopped yet?
} else // not stopped yet?
{
if (pvoice->ADSRX.State == 0) // -> attack
if (pvoice->ADSRX.State == 0) // -> attack
{
if (pvoice->ADSRX.AttackModeExp) {
if (pvoice->ADSRX.EnvelopeVol < 0x60000000)
@ -369,7 +369,7 @@ int MixADSR(VOICE_PROCESSED *pvoice) // MIX ADSR
return pvoice->ADSRX.lVolume;
}
//--------------------------------------------------//
if (pvoice->ADSRX.State == 1) // -> decay
if (pvoice->ADSRX.State == 1) // -> decay
{
switch ((pvoice->ADSRX.EnvelopeVol >> 28) & 0x7) {
case 0:
@ -408,7 +408,7 @@ int MixADSR(VOICE_PROCESSED *pvoice) // MIX ADSR
return pvoice->ADSRX.lVolume;
}
//--------------------------------------------------//
if (pvoice->ADSRX.State == 2) // -> sustain
if (pvoice->ADSRX.State == 2) // -> sustain
{
if (pvoice->ADSRX.SustainIncrease) {
if (pvoice->ADSRX.SustainModeExp) {
@ -473,11 +473,11 @@ void SPU2Worker()
int ch, flags;
VOICE_PROCESSED *pChannel = voices;
for (ch = 0; ch < SPU_NUMBER_VOICES; ch++, pChannel++) // loop em all... we will collect 1 ms of sound of each playing channel
for (ch = 0; ch < SPU_NUMBER_VOICES; ch++, pChannel++) // loop em all... we will collect 1 ms of sound of each playing channel
{
if (pChannel->bNew) {
pChannel->StartSound(); // start new sound
dwEndChannel2[ch / 24] &= ~(1 << (ch % 24)); // clear end channel bit
pChannel->StartSound(); // start new sound
dwEndChannel2[ch / 24] &= ~(1 << (ch % 24)); // clear end channel bit
}
if (!pChannel->bOn) {
@ -485,24 +485,24 @@ void SPU2Worker()
continue;
}
if (pChannel->iActFreq != pChannel->iUsedFreq) // new psx frequency?
if (pChannel->iActFreq != pChannel->iUsedFreq) // new psx frequency?
pChannel->VoiceChangeFrequency();
// loop until 1 ms of data is reached
int ns = 0;
while (ns < NSSIZE) {
while (pChannel->spos >= 0x10000) {
if (pChannel->iSBPos == 28) // 28 reached?
if (pChannel->iSBPos == 28) // 28 reached?
{
start = pChannel->pCurr; // set up the current pos
start = pChannel->pCurr; // set up the current pos
// special "stop" sign
if (start == (u8 *)-1) //!pChannel->bOn
if (start == (u8 *)-1) //!pChannel->bOn
{
pChannel->bOn = false; // -> turn everything off
pChannel->bOn = false; // -> turn everything off
pChannel->ADSRX.lVolume = 0;
pChannel->ADSRX.EnvelopeVol = 0;
goto ENDX; // -> and done for this channel
goto ENDX; // -> and done for this channel
}
pChannel->iSBPos = 0;
@ -524,15 +524,15 @@ void SPU2Worker()
// flag handler
if ((flags & 4) && (!pChannel->bIgnoreLoop))
pChannel->pLoop = start - 16; // loop adress
pChannel->pLoop = start - 16; // loop adress
if (flags & 1) // 1: stop/loop
if (flags & 1) // 1: stop/loop
{
// We play this block out first...
dwEndChannel2[ch / 24] |= (1 << (ch % 24));
//if(!(flags&2)) // 1+2: do loop... otherwise: stop
if (flags != 3 || pChannel->pLoop == NULL) // PETE: if we don't check exactly for 3, loop hang ups will happen (DQ4, for example)
{ // and checking if pLoop is set avoids crashes, yeah
if (flags != 3 || pChannel->pLoop == NULL) // PETE: if we don't check exactly for 3, loop hang ups will happen (DQ4, for example)
{ // and checking if pLoop is set avoids crashes, yeah
start = (u8 *)-1;
pChannel->bStop = true;
pChannel->bIgnoreLoop = false;
@ -541,10 +541,10 @@ void SPU2Worker()
}
}
pChannel->pCurr = start; // store values for next cycle
pChannel->pCurr = start; // store values for next cycle
}
pChannel->iSBPos++; // get sample data
pChannel->iSBPos++; // get sample data
pChannel->spos -= 0x10000;
}
@ -612,16 +612,16 @@ SPU2readDMA4Mem(u16 *pMem, int size)
irqCallbackSPU2();
}
spuaddr++; // inc spu addr
if (spuaddr > 0x0fffff) // wrap at 2Mb
spuaddr = 0; // wrap
spuaddr++; // inc spu addr
if (spuaddr > 0x0fffff) // wrap at 2Mb
spuaddr = 0; // wrap
}
spuaddr += 19; //Transfer Local To Host TSAH/L + Data Size + 20 (already +1'd)
spuaddr += 19; //Transfer Local To Host TSAH/L + Data Size + 20 (already +1'd)
C0_SPUADDR_SET(spuaddr);
// got from J.F. and Kanodin... is it needed?
spu2Ru16(REG_C0_SPUSTAT) &= ~0x80; // DMA complete
spu2Ru16(REG_C0_SPUSTAT) &= ~0x80; // DMA complete
SPUStartCycle[0] = SPUCycles;
SPUTargetCycle[0] = size;
interrupt |= (1 << 1);
@ -643,16 +643,16 @@ SPU2readDMA7Mem(u16 *pMem, int size)
IRQINFO |= 8;
irqCallbackSPU2();
}
spuaddr++; // inc spu addr
if (spuaddr > 0x0fffff) // wrap at 2Mb
spuaddr = 0; // wrap
spuaddr++; // inc spu addr
if (spuaddr > 0x0fffff) // wrap at 2Mb
spuaddr = 0; // wrap
}
spuaddr += 19; //Transfer Local To Host TSAH/L + Data Size + 20 (already +1'd)
spuaddr += 19; //Transfer Local To Host TSAH/L + Data Size + 20 (already +1'd)
C1_SPUADDR_SET(spuaddr);
// got from J.F. and Kanodin... is it needed?
spu2Ru16(REG_C1_SPUSTAT) &= ~0x80; // DMA complete
spu2Ru16(REG_C1_SPUSTAT) &= ~0x80; // DMA complete
SPUStartCycle[1] = SPUCycles;
SPUTargetCycle[1] = size;
interrupt |= (1 << 2);
@ -686,7 +686,7 @@ int ADMAS4Write()
Adma4.AmountLeft -= 512;
if (Adma4.AmountLeft == 0) {
SPUStartCycle[0] = SPUCycles;
SPUTargetCycle[0] = 1; //512*48000;
SPUTargetCycle[0] = 1; //512*48000;
spu2Ru16(REG_C0_SPUSTAT) &= ~0x80;
interrupt |= (1 << 1);
}
@ -713,7 +713,7 @@ int ADMAS7Write()
Adma7.AmountLeft -= 512;
if (Adma7.AmountLeft == 0) {
SPUStartCycle[1] = SPUCycles;
SPUTargetCycle[1] = 1; //512*48000;
SPUTargetCycle[1] = 1; //512*48000;
spu2Ru16(REG_C1_SPUSTAT) &= ~0x80;
interrupt |= (1 << 2);
}
@ -754,7 +754,7 @@ SPU2writeDMA4Mem(u16 *pMem, int size)
MemAddr[0] += size << 1;
spu2Ru16(REG_C0_SPUSTAT) &= ~0x80;
SPUStartCycle[0] = SPUCycles;
SPUTargetCycle[0] = 1; //iSize;
SPUTargetCycle[0] = 1; //iSize;
interrupt |= (1 << 1);
}
@ -792,7 +792,7 @@ SPU2writeDMA7Mem(u16 *pMem, int size)
MemAddr[1] += size << 1;
spu2Ru16(REG_C1_SPUSTAT) &= ~0x80;
SPUStartCycle[1] = SPUCycles;
SPUTargetCycle[1] = 1; //iSize;
SPUTargetCycle[1] = 1; //iSize;
interrupt |= (1 << 2);
}
@ -818,11 +818,11 @@ SPU2interruptDMA7()
}
// turn channels on
void SoundOn(s32 start, s32 end, u16 val) // SOUND ON PSX COMAND
void SoundOn(s32 start, s32 end, u16 val) // SOUND ON PSX COMAND
{
for (s32 ch = start; ch < end; ch++, val >>= 1) // loop channels
for (s32 ch = start; ch < end; ch++, val >>= 1) // loop channels
{
if ((val & 1) && voices[ch].pStart) // mmm... start has to be set before key on !?!
if ((val & 1) && voices[ch].pStart) // mmm... start has to be set before key on !?!
{
voices[ch].bNew = true;
voices[ch].bIgnoreLoop = false;
@ -831,22 +831,22 @@ void SoundOn(s32 start, s32 end, u16 val) // SOUND ON PSX COMAND
}
// turn channels off
void SoundOff(s32 start, s32 end, u16 val) // SOUND OFF PSX COMMAND
void SoundOff(s32 start, s32 end, u16 val) // SOUND OFF PSX COMMAND
{
for (s32 ch = start; ch < end; ch++, val >>= 1) // loop channels
for (s32 ch = start; ch < end; ch++, val >>= 1) // loop channels
{
if (val & 1) // && s_chan[i].bOn) mmm...
if (val & 1) // && s_chan[i].bOn) mmm...
voices[ch].bStop = true;
}
}
void FModOn(s32 start, s32 end, u16 val) // FMOD ON PSX COMMAND
void FModOn(s32 start, s32 end, u16 val) // FMOD ON PSX COMMAND
{
int ch;
for (ch = start; ch < end; ch++, val >>= 1) // loop channels
for (ch = start; ch < end; ch++, val >>= 1) // loop channels
{
if (val & 1) // -> fmod on/off
if (val & 1) // -> fmod on/off
{
if (ch > 0) {
}
@ -870,7 +870,7 @@ SPU2write(u32 mem, u16 value)
u32 r = mem & 0xffff;
// channel info
if ((r >= 0x0000 && r < 0x0180) || (r >= 0x0400 && r < 0x0580)) // some channel info?
if ((r >= 0x0000 && r < 0x0180) || (r >= 0x0400 && r < 0x0580)) // some channel info?
{
int ch = 0;
if (r >= 0x400)
@ -888,16 +888,16 @@ SPU2write(u32 mem, u16 value)
case 4: {
int NP;
if (value > 0x3fff)
NP = 0x3fff; // get pitch val
NP = 0x3fff; // get pitch val
else
NP = value;
pvoice->pvoice->pitch = NP;
NP = (44100L * NP) / 4096L; // calc frequency
NP = (44100L * NP) / 4096L; // calc frequency
if (NP < 1)
NP = 1; // some security
pvoice->iActFreq = NP; // store frequency
NP = 1; // some security
pvoice->iActFreq = NP; // store frequency
break;
}
case 6: {
@ -1075,7 +1075,7 @@ SPU2read(u32 mem)
u16 ret;
u32 r = mem & 0xffff;
if ((r >= 0x0000 && r <= 0x0180) || (r >= 0x0400 && r <= 0x0580)) // some channel info?
if ((r >= 0x0000 && r <= 0x0180) || (r >= 0x0400 && r <= 0x0580)) // some channel info?
{
s32 ch = 0;
@ -1092,7 +1092,7 @@ SPU2read(u32 mem)
}
}
if ((r > 0x01c0 && r <= 0x02E0) || (r > 0x05c0 && r <= 0x06E0)) // some channel info?
if ((r > 0x01c0 && r <= 0x02E0) || (r > 0x05c0 && r <= 0x06E0)) // some channel info?
{
s32 ch = 0;
u32 rx = r;
@ -1193,19 +1193,19 @@ void VOICE_PROCESSED::SetVolume(int iProcessRight)
{
u16 vol = iProcessRight ? pvoice->right.word : pvoice->left.word;
if (vol & 0x8000) // sweep not working
if (vol & 0x8000) // sweep not working
{
s16 sInc = 1; // -> sweep up?
s16 sInc = 1; // -> sweep up?
if (vol & 0x2000)
sInc = -1; // -> or down?
sInc = -1; // -> or down?
if (vol & 0x1000)
vol ^= 0xffff; // -> mmm... phase inverted? have to investigate this
vol = ((vol & 0x7f) + 1) / 2; // -> sweep: 0..127 -> 0..64
vol += vol / (2 * sInc); // -> HACK: we don't sweep right now, so we just raise/lower the volume by the half!
vol ^= 0xffff; // -> mmm... phase inverted? have to investigate this
vol = ((vol & 0x7f) + 1) / 2; // -> sweep: 0..127 -> 0..64
vol += vol / (2 * sInc); // -> HACK: we don't sweep right now, so we just raise/lower the volume by the half!
vol *= 128;
} else // no sweep:
} else // no sweep:
{
if (vol & 0x4000) // -> mmm... phase inverted? have to investigate this
if (vol & 0x4000) // -> mmm... phase inverted? have to investigate this
vol = 0x3fff - (vol & 0x3fff);
}
@ -1217,7 +1217,7 @@ void VOICE_PROCESSED::SetVolume(int iProcessRight)
void VOICE_PROCESSED::StartSound()
{
ADSRX.lVolume = 1; // and init some adsr vars
ADSRX.lVolume = 1; // and init some adsr vars
ADSRX.State = 0;
ADSRX.EnvelopeVol = 0;
@ -1225,10 +1225,10 @@ void VOICE_PROCESSED::StartSound()
// setup the reverb effects
}
pCurr = pStart; // set sample start
pCurr = pStart; // set sample start
iSBPos = 28;
bNew = false; // init channel flags
bNew = false; // init channel flags
bStop = false;
bOn = true;
spos = 0x10000L;
@ -1236,7 +1236,7 @@ void VOICE_PROCESSED::StartSound()
void VOICE_PROCESSED::VoiceChangeFrequency()
{
iUsedFreq = iActFreq; // -> take it and calc steps
iUsedFreq = iActFreq; // -> take it and calc steps
sinc = (u32)pvoice->pitch << 4;
if (!sinc)
sinc = 1;

46
plugins/SPU2null/SPU2.h
View File

@ -42,7 +42,7 @@ extern "C" {
#endif
extern FILE *spu2Log;
#define SPU2_LOG __Log //debug mode
#define SPU2_LOG __Log //debug mode
extern const u8 version;
extern const u8 revision;
@ -115,10 +115,10 @@ void SysMessage(char *fmt, ...);
#define REG_C0_END2 0x0342
#define REG_C1_END1 0x0740
#define REG_C1_END2 0x0742
#define REG_C0_SPUSTAT 0x0344 //not sure!
#define REG_C0_SPUSTAT 0x0344 //not sure!
#define REG_C1_CTRL 0x059A
#define REG_C1_ADMAS 0x05B0
#define REG_C1_SPUSTAT 0x0744 //not sure!
#define REG_C1_SPUSTAT 0x0744 //not sure!
#define REG_P_MVOLL 0x0760
#define REG_P_MVOLR 0x0762
#define REG_P_EVOLL 0x0764
@ -166,8 +166,8 @@ struct SPU_CONTROL_
u16 noiseFreq : 6;
u16 reverb : 1;
u16 irq : 1;
u16 dma : 2; // 1 - no dma, 2 - write, 3 - read
u16 extr : 1; // external reverb
u16 dma : 2; // 1 - no dma, 2 - write, 3 - read
u16 extr : 1; // external reverb
u16 cdreverb : 1;
u16 extAudio : 1;
u16 extCd : 1;
@ -189,31 +189,31 @@ struct _SPU_VOICE
u16 Vol : 7;
u16 res1 : 5;
u16 Inverted : 1;
u16 Decrease : 1; // if 0, increase
u16 ExpSlope : 1; // if 0, linear slope
u16 Sweep1 : 1; // always one
u16 Decrease : 1; // if 0, increase
u16 ExpSlope : 1; // if 0, linear slope
u16 Sweep1 : 1; // always one
} sweep;
u16 word;
} left, right;
u16 pitch : 14; // 1000 - no pitch, 2000 - pitch + 1, etc
u16 pitch : 14; // 1000 - no pitch, 2000 - pitch + 1, etc
u16 res0 : 2;
u16 SustainLvl : 4;
u16 DecayRate : 4;
u16 AttackRate : 7;
u16 AttackExp : 1; // if 0, linear
u16 AttackExp : 1; // if 0, linear
u16 ReleaseRate : 5;
u16 ReleaseExp : 1; // if 0, linear
u16 ReleaseExp : 1; // if 0, linear
u16 SustainRate : 7;
u16 res1 : 1;
u16 SustainDec : 1; // if 0, inc
u16 SustainExp : 1; // if 0, linear
u16 SustainDec : 1; // if 0, inc
u16 SustainExp : 1; // if 0, linear
u16 AdsrVol;
u16 Address; // add / 8
u16 RepeatAddr; // gets reset when sample starts
u16 Address; // add / 8
u16 RepeatAddr; // gets reset when sample starts
};
// ADSR INFOS PER CHANNEL
@ -233,8 +233,8 @@ struct ADSRInfoEx
s32 lVolume;
};
#define NSSIZE 48 // ~ 1 ms of data
#define NSFRAMES 16 // gather at least NSFRAMES of NSSIZE before submitting
#define NSSIZE 48 // ~ 1 ms of data
#define NSFRAMES 16 // gather at least NSFRAMES of NSSIZE before submitting
#define NSPACKETS 4
#define SPU_VOICE_STATE_SIZE (sizeof(VOICE_PROCESSED) - 4 * sizeof(void *))
@ -258,25 +258,25 @@ struct VOICE_PROCESSED
// start save state
s32 iSBPos; // mixing stuff
s32 iSBPos; // mixing stuff
s32 spos;
s32 sinc;
s32 iActFreq; // current psx pitch
s32 iUsedFreq; // current pc pitch
s32 iActFreq; // current psx pitch
s32 iUsedFreq; // current pc pitch
s32 iStartAddr, iLoopAddr, iNextAddr;
ADSRInfoEx ADSRX; // next ADSR settings (will be moved to active on sample start)
ADSRInfoEx ADSRX; // next ADSR settings (will be moved to active on sample start)
bool bIgnoreLoop, bNew, bNoise, bReverb, bOn, bStop, bVolChanged;
s32 memoffset; // if first core, 0, if second, 0x400
s32 memoffset; // if first core, 0, if second, 0x400
// end save state
///////////////////
// Sound Buffers //
///////////////////
u8 *pStart; // start and end addresses
u8 *pStart; // start and end addresses
u8 *pLoop, *pCurr;
_SPU_VOICE *pvoice;

6
plugins/SPU2null/Windows/Config.cpp
View File

@ -50,12 +50,12 @@ void LoadConfig()
if (!szTemp)
return;
strcpy(szTemp, "\\inis\\spu2null.ini");
fp = fopen("inis\\usbnull.ini", "rt"); //check if usbnull.ini really exists
fp = fopen("inis\\usbnull.ini", "rt"); //check if usbnull.ini really exists
if (!fp) {
CreateDirectory("inis", NULL);
memset(&conf, 0, sizeof(conf));
conf.Log = 0; //default value
SaveConfig(); //save and return
conf.Log = 0; //default value
SaveConfig(); //save and return
return;
}
fclose(fp);

4
plugins/SPU2null/Windows/Win32.cpp
View File

@ -93,10 +93,10 @@ void CALLBACK SPU2about()
(DLGPROC)AboutDlgProc);
}
BOOL APIENTRY DllMain(HANDLE hModule, // DLL INIT
BOOL APIENTRY DllMain(HANDLE hModule, // DLL INIT
DWORD dwReason,
LPVOID lpReserved)
{
hInst = (HINSTANCE)hModule;
return TRUE; // very quick :)
return TRUE; // very quick :)
}

2
plugins/USBnull/USB.cpp
View File

@ -23,7 +23,7 @@ string s_strLogPath = "logs";
const unsigned char version = PS2E_USB_VERSION;
const unsigned char revision = 0;
const unsigned char build = 7; // increase that with each version
const unsigned char build = 7; // increase that with each version
#ifdef _MSC_VER
#define snprintf sprintf_s

6
plugins/USBnull/Windows/Config.cpp
View File

@ -50,12 +50,12 @@ void LoadConfig()
if (!szTemp)
return;
strcpy(szTemp, "\\inis\\usbnull.ini");
fp = fopen("inis\\usbnull.ini", "rt"); //check if usbnull.ini really exists
fp = fopen("inis\\usbnull.ini", "rt"); //check if usbnull.ini really exists
if (!fp) {
CreateDirectory("inis", NULL);
memset(&conf, 0, sizeof(conf));
conf.Log = 0; //default value
SaveConfig(); //save and return
conf.Log = 0; //default value
SaveConfig(); //save and return
return;
}
fclose(fp);

4
plugins/USBnull/Windows/Win32.cpp
View File

@ -93,10 +93,10 @@ void CALLBACK USBabout()
(DLGPROC)AboutDlgProc);
}
BOOL APIENTRY DllMain(HANDLE hModule, // DLL INIT
BOOL APIENTRY DllMain(HANDLE hModule, // DLL INIT
DWORD dwReason,
LPVOID lpReserved)
{
hInst = (HINSTANCE)hModule;
return TRUE; // very quick :)
return TRUE; // very quick :)
}

24
plugins/cdvdGigaherz/src/CDVD.cpp
View File

@ -61,9 +61,9 @@ const unsigned char build = 10;
HINSTANCE hinst;
BOOL WINAPI DllMain(
HINSTANCE hinstDLL, // handle to DLL module
DWORD fdwReason, // reason for calling function
LPVOID lpvReserved // reserved
HINSTANCE hinstDLL, // handle to DLL module
DWORD fdwReason, // reason for calling function
LPVOID lpvReserved // reserved
)
{
if (fdwReason == DLL_PROCESS_ATTACH) {
@ -307,7 +307,7 @@ s32 CALLBACK CDVDreadTrack(u32 lsn, int mode)
return ret;
}
if (lsn > tracks[0].length) { // track 0 is total disc.
if (lsn > tracks[0].length) { // track 0 is total disc.
return -1;
}
@ -359,7 +359,7 @@ s32 CALLBACK CDVDreadSubQ(u32 lsn, cdvdSubQ *subq)
{
// the formatted subq command returns: control/adr, track, index, trk min, trk sec, trk frm, 0x00, abs min, abs sec, abs frm
if (lsn > tracks[0].length) // track 0 is total disc.
if (lsn > tracks[0].length) // track 0 is total disc.
return -1;
memset(subq, 0, sizeof(cdvdSubQ));
@ -428,7 +428,7 @@ s32 CALLBACK CDVDgetTOC(u8 *tocBuff)
if (mt < 0)
return -1;
if (mt == 0) { //single layer
if (mt == 0) { //single layer
// fake it
tocBuff[0] = 0x04;
tocBuff[1] = 0x02;
@ -437,11 +437,11 @@ s32 CALLBACK CDVDgetTOC(u8 *tocBuff)
tocBuff[4] = 0x86;
tocBuff[5] = 0x72;
tocBuff[16] = 0x00; // first sector for layer 0
tocBuff[16] = 0x00; // first sector for layer 0
tocBuff[17] = 0x03;
tocBuff[18] = 0x00;
tocBuff[19] = 0x00;
} else if (mt == 1) { //PTP
} else if (mt == 1) { //PTP
u32 layer1start = src->GetLayerBreakAddress() + 0x30000;
// dual sided
@ -452,7 +452,7 @@ s32 CALLBACK CDVDgetTOC(u8 *tocBuff)
tocBuff[4] = 0x41;
tocBuff[5] = 0x95;
tocBuff[14] = 0x61; // PTP
tocBuff[14] = 0x61; // PTP
tocBuff[16] = 0x00;
tocBuff[17] = 0x03;
@ -463,7 +463,7 @@ s32 CALLBACK CDVDgetTOC(u8 *tocBuff)
tocBuff[21] = (layer1start >> 16) & 0xff;
tocBuff[22] = (layer1start >> 8) & 0xff;
tocBuff[23] = (layer1start >> 0) & 0xff;
} else { //OTP
} else { //OTP
u32 layer1start = src->GetLayerBreakAddress() + 0x30000;
// dual sided
@ -474,7 +474,7 @@ s32 CALLBACK CDVDgetTOC(u8 *tocBuff)
tocBuff[4] = 0x41;
tocBuff[5] = 0x95;
tocBuff[14] = 0x71; // OTP
tocBuff[14] = 0x71; // OTP
tocBuff[16] = 0x00;
tocBuff[17] = 0x03;
@ -527,7 +527,7 @@ s32 CALLBACK CDVDgetTOC(u8 *tocBuff)
err = CDVDgetTD(i, &trackInfo);
lba_to_msf(trackInfo.lsn, &min, &sec, &frm);
tocBuff[i * 10 + 30] = trackInfo.type;
tocBuff[i * 10 + 32] = err == -1 ? 0 : itob(i); //number
tocBuff[i * 10 + 32] = err == -1 ? 0 : itob(i); //number
tocBuff[i * 10 + 37] = itob(min);
tocBuff[i * 10 + 38] = itob(sec);
tocBuff[i * 10 + 39] = itob(frm);

2
plugins/cdvdGigaherz/src/CDVD.h
View File

@ -60,7 +60,7 @@ typedef struct _toc_data
extern toc_data cdtoc;
class Source //abstract class as base for source modules
class Source //abstract class as base for source modules
{
Source(Source &);

8
plugins/cdvdGigaherz/src/ReadThread.cpp
View File

@ -39,7 +39,7 @@ typedef struct
{
int lsn;
int mode;
char data[2352 * 16]; //we will read in blocks of 16 sectors
char data[2352 * 16]; //we will read in blocks of 16 sectors
} SectorInfo;
//bits: 12 would use 1<<12 entries, or 4096*16 sectors ~ 128MB
@ -115,7 +115,7 @@ bool cdvdUpdateDiscStatus()
{
int change = src->DiscChanged();
if (change == -1) { //error getting status (no disc in drive?)
if (change == -1) { //error getting status (no disc in drive?)
//try to recreate the device
src->Reopen();
@ -277,7 +277,7 @@ s32 cdvdRequestSector(u32 sector, s32 mode)
if (sector >= tracks[0].length)
return -1;
sector &= ~15; //align to 16-sector block
sector &= ~15; //align to 16-sector block
threadRequestInfo.lsn = sector;
threadRequestInfo.mode = mode;
@ -330,7 +330,7 @@ s32 cdvdDirectReadSector(s32 first, s32 mode, char *buffer)
if ((u32)first >= tracks[0].length)
return -1;
s32 sector = first & (~15); //align to 16-sector block
s32 sector = first & (~15); //align to 16-sector block
EnterCriticalSection(&CacheMutex);
if (!cdvdCacheFetch(sector, mode, data)) {

2
plugins/cdvdGigaherz/src/TocStuff.cpp
View File

@ -75,7 +75,7 @@ s32 cdvdParseTOC()
etrack = cdtoc.Descriptors[i].Msf[0];
}
break;
case 0xa2: // session size
case 0xa2: // session size
if (cdtoc.Descriptors[i].SessionNumber == cdtoc.LastCompleteSession) {
min = cdtoc.Descriptors[i].Msf[0];
sec = cdtoc.Descriptors[i].Msf[1];

44
plugins/cdvdGigaherz/src/Windows/IOCtlSrc.cpp
View File

@ -153,13 +153,13 @@ s32 IOCtlSrc::GetSectorCount()
dvdrs.LayerNumber = 0;
if (DeviceIoControl(device, IOCTL_DVD_READ_STRUCTURE, &dvdrs, sizeof(dvdrs), &dld, sizeof(dld), &size, NULL) != 0) {
s32 sectors1 = _byteswap_ulong(dld.ld.EndDataSector) - _byteswap_ulong(dld.ld.StartingDataSector) + 1;
if (dld.ld.NumberOfLayers == 1) { // PTP, OTP
if (dld.ld.TrackPath == 0) { // PTP
if (dld.ld.NumberOfLayers == 1) { // PTP, OTP
if (dld.ld.TrackPath == 0) { // PTP
dvdrs.LayerNumber = 1;
if (DeviceIoControl(device, IOCTL_DVD_READ_STRUCTURE, &dvdrs, sizeof(dvdrs), &dld, sizeof(dld), &size, nullptr) != 0) {
sectors1 += _byteswap_ulong(dld.ld.EndDataSector) - _byteswap_ulong(dld.ld.StartingDataSector) + 1;
}
} else { // OTP
} else { // OTP
// sectors = end_sector - (~end_sector_l0 & 0xFFFFFF) + end_sector_l0 - start_sector
dld.ld.EndLayerZeroSector = _byteswap_ulong(dld.ld.EndLayerZeroSector);
sectors1 += dld.ld.EndLayerZeroSector - (~dld.ld.EndLayerZeroSector & 0x00FFFFFF) + 1;
@ -189,11 +189,11 @@ s32 IOCtlSrc::GetLayerBreakAddress()
dvdrs.SessionId = sessID;
dvdrs.LayerNumber = 0;
if (DeviceIoControl(device, IOCTL_DVD_READ_STRUCTURE, &dvdrs, sizeof(dvdrs), &dld, sizeof(dld), &size, nullptr)) {
if (dld.ld.NumberOfLayers == 0) { // Single layer
if (dld.ld.NumberOfLayers == 0) { // Single layer
layerBreak = 0;
} else if (dld.ld.TrackPath == 0) { // PTP
} else if (dld.ld.TrackPath == 0) { // PTP
layerBreak = _byteswap_ulong(dld.ld.EndDataSector) - _byteswap_ulong(dld.ld.StartingDataSector);
} else { // OTP
} else { // OTP
layerBreak = _byteswap_ulong(dld.ld.EndLayerZeroSector) - _byteswap_ulong(dld.ld.StartingDataSector);
}
@ -212,9 +212,9 @@ void IOCtlSrc::SetSpindleSpeed(bool restore_defaults)
USHORT speed = 0;
if (GetMediaType() < 0)
speed = 4800; // CD-ROM to ~32x (PS2 has 24x (3600 KB/s))
speed = 4800; // CD-ROM to ~32x (PS2 has 24x (3600 KB/s))
else
speed = 11080; // DVD-ROM to ~8x (PS2 has 4x (5540 KB/s))
speed = 11080; // DVD-ROM to ~8x (PS2 has 4x (5540 KB/s))
if (!restore_defaults) {
CDROM_SET_SPEED s;
@ -224,11 +224,11 @@ void IOCtlSrc::SetSpindleSpeed(bool restore_defaults)
s.WriteSpeed = speed;
if (DeviceIoControl(device,
IOCTL_CDROM_SET_SPEED, //operation to perform
&s, sizeof(s), //no input buffer
NULL, 0, //output buffer
&dontcare, //#bytes returned
(LPOVERLAPPED)NULL)) //synchronous I/O == 0)
IOCTL_CDROM_SET_SPEED, //operation to perform
&s, sizeof(s), //no input buffer
NULL, 0, //output buffer
&dontcare, //#bytes returned
(LPOVERLAPPED)NULL)) //synchronous I/O == 0)
{
printf(" * CDVD: setSpindleSpeed success (%uKB/s)\n", speed);
} else {
@ -238,15 +238,15 @@ void IOCtlSrc::SetSpindleSpeed(bool restore_defaults)
CDROM_SET_SPEED s;
s.RequestType = CdromSetSpeed;
s.RotationControl = CdromDefaultRotation;
s.ReadSpeed = 0xffff; // maximum ?
s.ReadSpeed = 0xffff; // maximum ?
s.WriteSpeed = 0xffff;
DeviceIoControl(device,
IOCTL_CDROM_SET_SPEED, //operation to perform
&s, sizeof(s), //no input buffer
NULL, 0, //output buffer
&dontcare, //#bytes returned
(LPOVERLAPPED)NULL); //synchronous I/O == 0)
IOCTL_CDROM_SET_SPEED, //operation to perform
&s, sizeof(s), //no input buffer
NULL, 0, //output buffer
&dontcare, //#bytes returned
(LPOVERLAPPED)NULL); //synchronous I/O == 0)
}
}
@ -275,11 +275,11 @@ s32 IOCtlSrc::GetMediaType()
dvdrs.SessionId = sessID;
dvdrs.LayerNumber = 0;
if (DeviceIoControl(device, IOCTL_DVD_READ_STRUCTURE, &dvdrs, sizeof(dvdrs), &dld, sizeof(dld), &size, nullptr)) {
if (dld.ld.NumberOfLayers == 0) { // Single layer
if (dld.ld.NumberOfLayers == 0) { // Single layer
mediaType = 0;
} else if (dld.ld.TrackPath == 0) { // PTP
} else if (dld.ld.TrackPath == 0) { // PTP
mediaType = 1;
} else { // OTP
} else { // OTP
mediaType = 2;
}

2
plugins/dev9null/DEV9.cpp
View File

@ -35,7 +35,7 @@ using namespace std;
const unsigned char version = PS2E_DEV9_VERSION;
const unsigned char revision = 0;
const unsigned char build = 5; // increase that with each version
const unsigned char build = 5; // increase that with each version
#ifdef _MSC_VER
#define snprintf sprintf_s

2
plugins/onepad/GamePad.cpp
View File

@ -50,6 +50,6 @@ void GamePad::DoRumble(int type, int pad)
void GamePad::UpdateGamePadState()
{
#ifdef SDL_BUILD
SDL_JoystickUpdate(); // No need to make yet another function call for that
SDL_JoystickUpdate(); // No need to make yet another function call for that
#endif
}

8
plugins/onepad/GamePad.h
View File

@ -32,8 +32,8 @@ public:
return;
}
GamePad(const GamePad &); // copy constructor
GamePad &operator=(const GamePad &); // assignment
GamePad(const GamePad &); // copy constructor
GamePad &operator=(const GamePad &); // assignment
/**
* Find every interesting devices and create right structure for them(depend on backend)
@ -55,7 +55,7 @@ public:
**/
static void DoRumble(int type, int pad);
virtual bool Init(int id) { return false; } // opens a handle and gets information
virtual bool Init(int id) { return false; } // opens a handle and gets information
/**
* Used for GUI checkbox to give feedback to the user
@ -143,7 +143,7 @@ public:
virtual int GetAxisFromKey(int pad, int index) { return 0; }
// These fields need to be inherited by child classes
protected:
string devname; // pretty device name
string devname; // pretty device name
int _id;
int numbuttons, numaxes, numhats;
int deadzone;

156
plugins/onepad/Linux/GamepadConfiguration.cpp
View File

@ -22,11 +22,11 @@
// Construtor of GamepadConfiguration
GamepadConfiguration::GamepadConfiguration(int pad, wxWindow *parent)
: wxDialog(
parent, // Parent
wxID_ANY, // ID
_T("Gamepad configuration"), // Title
wxDefaultPosition, // Position
wxSize(400, 230), // Width + Lenght
parent, // Parent
wxID_ANY, // ID
_T("Gamepad configuration"), // Title
wxDefaultPosition, // Position
wxSize(400, 230), // Width + Lenght
// Style
wxSYSTEM_MENU |
wxCAPTION |
@ -36,84 +36,84 @@ GamepadConfiguration::GamepadConfiguration(int pad, wxWindow *parent)
m_pad_id = pad;
m_pan_gamepad_config = new wxPanel(
this, // Parent
wxID_ANY, // ID
wxDefaultPosition, // Prosition
wxSize(300, 200) // Size
this, // Parent
wxID_ANY, // ID
wxDefaultPosition, // Prosition
wxSize(300, 200) // Size
);
m_cb_rumble = new wxCheckBox(
m_pan_gamepad_config, // Parent
wxID_ANY, // ID
_T("&Enable rumble"), // Label
wxPoint(20, 20) // Position
m_pan_gamepad_config, // Parent
wxID_ANY, // ID
_T("&Enable rumble"), // Label
wxPoint(20, 20) // Position
);
m_cb_hack_sixaxis_usb = new wxCheckBox(
m_pan_gamepad_config, // Parent
wxID_ANY, // ID
_T("&Hack: Sixaxis/DS3 plugged in USB"), // Label
wxPoint(20, 40) // Position
m_pan_gamepad_config, // Parent
wxID_ANY, // ID
_T("&Hack: Sixaxis/DS3 plugged in USB"), // Label
wxPoint(20, 40) // Position
);
m_cb_hack_sixaxis_pressure = new wxCheckBox(
m_pan_gamepad_config, // Parent
wxID_ANY, // ID
_T("&Hack: Sixaxis/DS3 pressure"), // Label
wxPoint(20, 60) // Position
m_pan_gamepad_config, // Parent
wxID_ANY, // ID
_T("&Hack: Sixaxis/DS3 pressure"), // Label
wxPoint(20, 60) // Position
);
wxString txt_rumble = wxT("Rumble intensity");
m_lbl_rumble_intensity = new wxStaticText(
m_pan_gamepad_config, // Parent
wxID_ANY, // ID
txt_rumble, // Text which must be displayed
wxPoint(20, 90), // Position
wxDefaultSize // Size
m_pan_gamepad_config, // Parent
wxID_ANY, // ID
txt_rumble, // Text which must be displayed
wxPoint(20, 90), // Position
wxDefaultSize // Size
);
m_sl_rumble_intensity = new wxSlider(
m_pan_gamepad_config, // Parent
wxID_ANY, // ID
0, // value
0, // min value 0x0000
0x7FFF, // max value 0x7FFF
wxPoint(150, 83), // Position
wxSize(200, 30) // Size
m_pan_gamepad_config, // Parent
wxID_ANY, // ID
0, // value
0, // min value 0x0000
0x7FFF, // max value 0x7FFF
wxPoint(150, 83), // Position
wxSize(200, 30) // Size
);
wxString txt_joystick = wxT("Joystick sensibility");
m_lbl_rumble_intensity = new wxStaticText(
m_pan_gamepad_config, // Parent
wxID_ANY, // ID
txt_joystick, // Text which must be displayed
wxPoint(20, 120), // Position
wxDefaultSize // Size
m_pan_gamepad_config, // Parent
wxID_ANY, // ID
txt_joystick, // Text which must be displayed
wxPoint(20, 120), // Position
wxDefaultSize // Size
);
m_sl_joystick_sensibility = new wxSlider(
m_pan_gamepad_config, // Parent
wxID_ANY, // ID
0, // value
0, // min value
100, // max value
wxPoint(150, 113), // Position
wxSize(200, 30) // Size
m_pan_gamepad_config, // Parent
wxID_ANY, // ID
0, // value
0, // min value
100, // max value
wxPoint(150, 113), // Position
wxSize(200, 30) // Size
);
m_bt_ok = new wxButton(
m_pan_gamepad_config, // Parent
wxID_ANY, // ID
_T("&OK"), // Label
wxPoint(250, 160), // Position
wxSize(60, 25) // Size
m_pan_gamepad_config, // Parent
wxID_ANY, // ID
_T("&OK"), // Label
wxPoint(250, 160), // Position
wxSize(60, 25) // Size
);
m_bt_cancel = new wxButton(
m_pan_gamepad_config, // Parent
wxID_ANY, // ID
_T("&Cancel"), // Label
wxPoint(320, 160), // Position
wxSize(60, 25) // Size
m_pan_gamepad_config, // Parent
wxID_ANY, // ID
_T("&Cancel"), // Label
wxPoint(320, 160), // Position
wxSize(60, 25) // Size
);
Bind(wxEVT_BUTTON, &GamepadConfiguration::OnButtonClicked, this);
@ -130,7 +130,7 @@ GamepadConfiguration::GamepadConfiguration(int pad, wxWindow *parent)
*/
void GamepadConfiguration::InitGamepadConfiguration()
{
repopulate(); // Set label and fit simulated key array
repopulate(); // Set label and fit simulated key array
/*
* Check if there exist at least one pad available
* if the pad id is 0, you need at least 1 gamepad connected,
@ -146,14 +146,14 @@ void GamepadConfiguration::InitGamepadConfiguration()
if (!s_vgamePad[m_pad_id]->TestForce(0.001f)) {
wxMessageBox(L"Rumble is not available for your device.");
m_cb_rumble->Disable(); // disable the rumble checkbox
m_sl_rumble_intensity->Disable(); // disable the rumble intensity slider
m_cb_rumble->Disable(); // disable the rumble checkbox
m_sl_rumble_intensity->Disable(); // disable the rumble intensity slider
}
} else {
wxMessageBox(L"No gamepad detected.");
m_sl_joystick_sensibility->Disable(); // disable the joystick sensibility slider
m_cb_rumble->Disable(); // disable the rumble checkbox
m_sl_rumble_intensity->Disable(); // disable the rumble intensity slider
m_sl_joystick_sensibility->Disable(); // disable the joystick sensibility slider
m_cb_rumble->Disable(); // disable the rumble checkbox
m_sl_rumble_intensity->Disable(); // disable the rumble intensity slider
}
}
@ -167,13 +167,13 @@ void GamepadConfiguration::InitGamepadConfiguration()
void GamepadConfiguration::OnButtonClicked(wxCommandEvent &event)
{
// Affichage d'un message à chaque clic sur le bouton
wxButton *bt_tmp = (wxButton *)event.GetEventObject(); // get the button object
int bt_id = bt_tmp->GetId(); // get the real ID
if (bt_id == m_bt_ok->GetId()) { // If the button ID is equals to the Ok button ID
Close(); // Close the window
} else if (bt_id == m_bt_cancel->GetId()) { // If the button ID is equals to the cancel button ID
reset(); // reinitialize the value of each parameters
Close(); // Close the window
wxButton *bt_tmp = (wxButton *)event.GetEventObject(); // get the button object
int bt_id = bt_tmp->GetId(); // get the real ID
if (bt_id == m_bt_ok->GetId()) { // If the button ID is equals to the Ok button ID
Close(); // Close the window
} else if (bt_id == m_bt_cancel->GetId()) { // If the button ID is equals to the cancel button ID
reset(); // reinitialize the value of each parameters
Close(); // Close the window
}
}
@ -184,12 +184,12 @@ void GamepadConfiguration::OnButtonClicked(wxCommandEvent &event)
*/
void GamepadConfiguration::OnSliderReleased(wxCommandEvent &event)
{
wxSlider *sl_tmp = (wxSlider *)event.GetEventObject(); // get the slider object
int sl_id = sl_tmp->GetId(); // slider id
if (sl_id == m_sl_rumble_intensity->GetId()) { // if this is the rumble intensity slider
u32 intensity = m_sl_rumble_intensity->GetValue(); // get the new value
conf->set_ff_intensity(intensity); // and set the force feedback intensity value with it
// get the rumble intensity
wxSlider *sl_tmp = (wxSlider *)event.GetEventObject(); // get the slider object
int sl_id = sl_tmp->GetId(); // slider id
if (sl_id == m_sl_rumble_intensity->GetId()) { // if this is the rumble intensity slider
u32 intensity = m_sl_rumble_intensity->GetValue(); // get the new value
conf->set_ff_intensity(intensity); // and set the force feedback intensity value with it
// get the rumble intensity
float strength = m_sl_rumble_intensity->GetValue();
/*
* convert in a float value between 0 and 1, and run rumble feedback
@ -204,8 +204,8 @@ void GamepadConfiguration::OnSliderReleased(wxCommandEvent &event)
*/
s_vgamePad[m_pad_id]->TestForce(strength / 0x7FFF);
} else if (sl_id == m_sl_joystick_sensibility->GetId()) {
u32 sensibility = m_sl_joystick_sensibility->GetValue(); // get the new value
conf->set_sensibility(sensibility); // and set the joystick sensibility
u32 sensibility = m_sl_joystick_sensibility->GetValue(); // get the new value
conf->set_sensibility(sensibility); // and set the joystick sensibility
}
}
@ -214,7 +214,7 @@ void GamepadConfiguration::OnSliderReleased(wxCommandEvent &event)
*/
void GamepadConfiguration::OnCheckboxChange(wxCommandEvent &event)
{
wxCheckBox *cb_tmp = (wxCheckBox *)event.GetEventObject(); // get the slider object
wxCheckBox *cb_tmp = (wxCheckBox *)event.GetEventObject(); // get the slider object
int cb_id = cb_tmp->GetId();
if (cb_id == m_cb_rumble->GetId()) {
conf->pad_options[m_pad_id].forcefeedback = (m_cb_rumble->GetValue()) ? (u32)1 : (u32)0;
@ -267,6 +267,6 @@ void GamepadConfiguration::repopulate()
// enable rumble intensity slider if the checkbox is checked
if (m_cb_rumble->GetValue())
m_sl_rumble_intensity->Enable();
else // disable otherwise
else // disable otherwise
m_sl_rumble_intensity->Disable();
}

2
plugins/onepad/Linux/GamepadConfiguration.h
View File

@ -57,4 +57,4 @@ public:
void InitGamepadConfiguration();
};
#endif // __GAMEPADCONFIGURATION_H__
#endif // __GAMEPADCONFIGURATION_H__

104
plugins/onepad/Linux/JoystickConfiguration.cpp
View File

@ -22,11 +22,11 @@
// Construtor of JoystickConfiguration
JoystickConfiguration::JoystickConfiguration(int pad, bool left, wxWindow *parent)
: wxDialog(
parent, // Parent
wxID_ANY, // ID
_T("Gamepad configuration"), // Title
wxDefaultPosition, // Position
wxSize(400, 200), // Width + Lenght
parent, // Parent
wxID_ANY, // ID
_T("Gamepad configuration"), // Title
wxDefaultPosition, // Position
wxSize(400, 200), // Width + Lenght
// Style
wxSYSTEM_MENU |
wxCAPTION |
@ -37,70 +37,70 @@ JoystickConfiguration::JoystickConfiguration(int pad, bool left, wxWindow *paren
m_pad_id = pad;
m_isForLeftJoystick = left;
m_pan_joystick_config = new wxPanel(
this, // Parent
wxID_ANY, // ID
wxDefaultPosition, // Prosition
wxSize(300, 200) // Size
this, // Parent
wxID_ANY, // ID
wxDefaultPosition, // Prosition
wxSize(300, 200) // Size
);
if (m_isForLeftJoystick) {
m_cb_reverse_Lx = new wxCheckBox(
m_pan_joystick_config, // Parent
wxID_ANY, // ID
_T("Reverse Lx"), // Label
wxPoint(20, 20) // Position
m_pan_joystick_config, // Parent
wxID_ANY, // ID
_T("Reverse Lx"), // Label
wxPoint(20, 20) // Position
);
m_cb_reverse_Ly = new wxCheckBox(
m_pan_joystick_config, // Parent
wxID_ANY, // ID
_T("Reverse Ly"), // Label
wxPoint(20, 40) // Position
m_pan_joystick_config, // Parent
wxID_ANY, // ID
_T("Reverse Ly"), // Label
wxPoint(20, 40) // Position
);
m_cb_mouse_Ljoy = new wxCheckBox(
m_pan_joystick_config, // Parent
wxID_ANY, // ID
_T("Use mouse for left analog joystick"), // Label
wxPoint(20, 60) // Position
m_pan_joystick_config, // Parent
wxID_ANY, // ID
_T("Use mouse for left analog joystick"), // Label
wxPoint(20, 60) // Position
);
} else {
m_cb_reverse_Rx = new wxCheckBox(
m_pan_joystick_config, // Parent
wxID_ANY, // ID
_T("Reverse Rx"), // Label
wxPoint(20, 20) // Position
m_pan_joystick_config, // Parent
wxID_ANY, // ID
_T("Reverse Rx"), // Label
wxPoint(20, 20) // Position
);
m_cb_reverse_Ry = new wxCheckBox(
m_pan_joystick_config, // Parent
wxID_ANY, // ID
_T("Reverse Ry"), // Label
wxPoint(20, 40) // Position
m_pan_joystick_config, // Parent
wxID_ANY, // ID
_T("Reverse Ry"), // Label
wxPoint(20, 40) // Position
);
m_cb_mouse_Rjoy = new wxCheckBox(
m_pan_joystick_config, // Parent
wxID_ANY, // ID
_T("Use mouse for right analog joystick"), // Label
wxPoint(20, 60) // Position
m_pan_joystick_config, // Parent
wxID_ANY, // ID
_T("Use mouse for right analog joystick"), // Label
wxPoint(20, 60) // Position
);
}
m_bt_ok = new wxButton(
m_pan_joystick_config, // Parent
wxID_ANY, // ID
_T("&OK"), // Label
wxPoint(250, 130), // Position
wxSize(60, 25) // Size
m_pan_joystick_config, // Parent
wxID_ANY, // ID
_T("&OK"), // Label
wxPoint(250, 130), // Position
wxSize(60, 25) // Size
);
m_bt_cancel = new wxButton(
m_pan_joystick_config, // Parent
wxID_ANY, // ID
_T("&Cancel"), // Label
wxPoint(320, 130), // Position
wxSize(60, 25) // Size
m_pan_joystick_config, // Parent
wxID_ANY, // ID
_T("&Cancel"), // Label
wxPoint(320, 130), // Position
wxSize(60, 25) // Size
);
Bind(wxEVT_BUTTON, &JoystickConfiguration::OnButtonClicked, this);
@ -113,7 +113,7 @@ JoystickConfiguration::JoystickConfiguration(int pad, bool left, wxWindow *paren
*/
void JoystickConfiguration::InitJoystickConfiguration()
{
repopulate(); // Set label and fit simulated key array
repopulate(); // Set label and fit simulated key array
/*
* Check if there exist at least one pad available
* if the pad id is 0, you need at least 1 gamepad connected,
@ -143,13 +143,13 @@ void JoystickConfiguration::InitJoystickConfiguration()
void JoystickConfiguration::OnButtonClicked(wxCommandEvent &event)
{
// Affichage d'un message à chaque clic sur le bouton
wxButton *bt_tmp = (wxButton *)event.GetEventObject(); // get the button object
int bt_id = bt_tmp->GetId(); // get the real ID
if (bt_id == m_bt_ok->GetId()) { // If the button ID is equals to the Ok button ID
Close(); // Close the window
} else if (bt_id == m_bt_cancel->GetId()) { // If the button ID is equals to the cancel button ID
reset(); // reinitialize the value of each parameters
Close(); // Close the window
wxButton *bt_tmp = (wxButton *)event.GetEventObject(); // get the button object
int bt_id = bt_tmp->GetId(); // get the real ID
if (bt_id == m_bt_ok->GetId()) { // If the button ID is equals to the Ok button ID
Close(); // Close the window
} else if (bt_id == m_bt_cancel->GetId()) { // If the button ID is equals to the cancel button ID
reset(); // reinitialize the value of each parameters
Close(); // Close the window
}
}
@ -158,7 +158,7 @@ void JoystickConfiguration::OnButtonClicked(wxCommandEvent &event)
*/
void JoystickConfiguration::OnCheckboxChange(wxCommandEvent &event)
{
wxCheckBox *cb_tmp = (wxCheckBox *)event.GetEventObject(); // get the slider object
wxCheckBox *cb_tmp = (wxCheckBox *)event.GetEventObject(); // get the slider object
int cb_id = cb_tmp->GetId();
bool val;
if (m_isForLeftJoystick) {

6
plugins/onepad/Linux/JoystickConfiguration.h
View File

@ -36,8 +36,8 @@ class JoystickConfiguration : public wxDialog
{
wxPanel *m_pan_joystick_config;
wxCheckBox *m_cb_reverse_Lx, *m_cb_reverse_Ly, *m_cb_reverse_Rx, *m_cb_reverse_Ry,
*m_cb_mouse_Ljoy, // Use mouse for left joystick
*m_cb_mouse_Rjoy; // Use mouse for right joystick
*m_cb_mouse_Ljoy, // Use mouse for left joystick
*m_cb_mouse_Rjoy; // Use mouse for right joystick
wxButton *m_bt_ok, *m_bt_cancel;
u32 m_pad_id;
@ -57,4 +57,4 @@ public:
void InitJoystickConfiguration();
};
#endif // __JOYSTICKCONFIGURATION_H__
#endif // __JOYSTICKCONFIGURATION_H__

360
plugins/onepad/Linux/dialog.cpp
View File

@ -21,11 +21,11 @@
// Construtor of Dialog
Dialog::Dialog()
: wxDialog(NULL, // Parent
wxID_ANY, // ID
_T("OnePad configuration"), // Title
wxDefaultPosition, // Position
wxSize(DEFAULT_WIDTH, DEFAULT_HEIGHT), // Width + Lenght
: wxDialog(NULL, // Parent
wxID_ANY, // ID
_T("OnePad configuration"), // Title
wxDefaultPosition, // Position
wxSize(DEFAULT_WIDTH, DEFAULT_HEIGHT), // Width + Lenght
// Style
wxSYSTEM_MENU |
wxCAPTION |
@ -43,196 +43,196 @@ Dialog::Dialog()
int padding[BUTTONS_LENGHT][4];
// L1
padding[PAD_L1][0] = 218; // Width
padding[PAD_L1][1] = 28; // Height
padding[PAD_L1][2] = 50; // X
padding[PAD_L1][3] = 175; // Y
padding[PAD_L1][0] = 218; // Width
padding[PAD_L1][1] = 28; // Height
padding[PAD_L1][2] = 50; // X
padding[PAD_L1][3] = 175; // Y
// L2
padding[PAD_L2][0] = 218; // Width
padding[PAD_L2][1] = 28; // Height
padding[PAD_L2][2] = 50; // X
padding[PAD_L2][3] = 104; // Y
padding[PAD_L2][0] = 218; // Width
padding[PAD_L2][1] = 28; // Height
padding[PAD_L2][2] = 50; // X
padding[PAD_L2][3] = 104; // Y
// R1
padding[PAD_R1][0] = 218; // Width
padding[PAD_R1][1] = 28; // Height
padding[PAD_R1][2] = 726; // X
padding[PAD_R1][3] = 175; // Y
padding[PAD_R1][0] = 218; // Width
padding[PAD_R1][1] = 28; // Height
padding[PAD_R1][2] = 726; // X
padding[PAD_R1][3] = 175; // Y
// R2
padding[PAD_R2][0] = 218; // Width
padding[PAD_R2][1] = 28; // Height
padding[PAD_R2][2] = 726; // X
padding[PAD_R2][3] = 104; // Y
padding[PAD_R2][0] = 218; // Width
padding[PAD_R2][1] = 28; // Height
padding[PAD_R2][2] = 726; // X
padding[PAD_R2][3] = 104; // Y
// Triangle
padding[PAD_TRIANGLE][0] = 218; // Width
padding[PAD_TRIANGLE][1] = 28; // Height
padding[PAD_TRIANGLE][2] = 726; // X
padding[PAD_TRIANGLE][3] = 246; // Y
padding[PAD_TRIANGLE][0] = 218; // Width
padding[PAD_TRIANGLE][1] = 28; // Height
padding[PAD_TRIANGLE][2] = 726; // X
padding[PAD_TRIANGLE][3] = 246; // Y
// Circle
padding[PAD_CIRCLE][0] = 218; // Width
padding[PAD_CIRCLE][1] = 28; // Height
padding[PAD_CIRCLE][2] = 726; // X
padding[PAD_CIRCLE][3] = 319; // Y
padding[PAD_CIRCLE][0] = 218; // Width
padding[PAD_CIRCLE][1] = 28; // Height
padding[PAD_CIRCLE][2] = 726; // X
padding[PAD_CIRCLE][3] = 319; // Y
// Cross
padding[PAD_CROSS][0] = 218; // Width
padding[PAD_CROSS][1] = 28; // Height
padding[PAD_CROSS][2] = 726; // X
padding[PAD_CROSS][3] = 391; // Y
padding[PAD_CROSS][0] = 218; // Width
padding[PAD_CROSS][1] = 28; // Height
padding[PAD_CROSS][2] = 726; // X
padding[PAD_CROSS][3] = 391; // Y
// Square
padding[PAD_SQUARE][0] = 218; // Width
padding[PAD_SQUARE][1] = 28; // Height
padding[PAD_SQUARE][2] = 726; // X
padding[PAD_SQUARE][3] = 463; // Y
padding[PAD_SQUARE][0] = 218; // Width
padding[PAD_SQUARE][1] = 28; // Height
padding[PAD_SQUARE][2] = 726; // X
padding[PAD_SQUARE][3] = 463; // Y
// Directional pad up
padding[PAD_UP][0] = 100; // Width
padding[PAD_UP][1] = 25; // Height
padding[PAD_UP][2] = 108; // X
padding[PAD_UP][3] = 290; // Y
padding[PAD_UP][0] = 100; // Width
padding[PAD_UP][1] = 25; // Height
padding[PAD_UP][2] = 108; // X
padding[PAD_UP][3] = 290; // Y
// Directional pad down
padding[PAD_DOWN][0] = 100; // Width
padding[PAD_DOWN][1] = 25; // Height
padding[PAD_DOWN][2] = 108; // X
padding[PAD_DOWN][3] = 340; // Y
padding[PAD_DOWN][0] = 100; // Width
padding[PAD_DOWN][1] = 25; // Height
padding[PAD_DOWN][2] = 108; // X
padding[PAD_DOWN][3] = 340; // Y
// Directional pad right
padding[PAD_RIGHT][0] = 109; // Width
padding[PAD_RIGHT][1] = 25; // Height
padding[PAD_RIGHT][2] = 159; // X
padding[PAD_RIGHT][3] = 315; // Y
padding[PAD_RIGHT][0] = 109; // Width
padding[PAD_RIGHT][1] = 25; // Height
padding[PAD_RIGHT][2] = 159; // X
padding[PAD_RIGHT][3] = 315; // Y
// Directional pad left
padding[PAD_LEFT][0] = 109; // Width
padding[PAD_LEFT][1] = 25; // Height
padding[PAD_LEFT][2] = 50; // X
padding[PAD_LEFT][3] = 315; // Y
padding[PAD_LEFT][0] = 109; // Width
padding[PAD_LEFT][1] = 25; // Height
padding[PAD_LEFT][2] = 50; // X
padding[PAD_LEFT][3] = 315; // Y
// Left Joystick up
padding[PAD_L_UP][0] = 100; // Width
padding[PAD_L_UP][1] = 25; // Height
padding[PAD_L_UP][2] = 325; // X
padding[PAD_L_UP][3] = 527; // Y
padding[PAD_L_UP][0] = 100; // Width
padding[PAD_L_UP][1] = 25; // Height
padding[PAD_L_UP][2] = 325; // X
padding[PAD_L_UP][3] = 527; // Y
// Left Joystick down
padding[PAD_L_DOWN][0] = 100; // Width
padding[PAD_L_DOWN][1] = 25; // Height
padding[PAD_L_DOWN][2] = 325; // X
padding[PAD_L_DOWN][3] = 577; // Y
padding[PAD_L_DOWN][0] = 100; // Width
padding[PAD_L_DOWN][1] = 25; // Height
padding[PAD_L_DOWN][2] = 325; // X
padding[PAD_L_DOWN][3] = 577; // Y
// Left Joystick right
padding[PAD_L_RIGHT][0] = 109; // Width
padding[PAD_L_RIGHT][1] = 25; // Height
padding[PAD_L_RIGHT][2] = 377; // X
padding[PAD_L_RIGHT][3] = 552; // Y
padding[PAD_L_RIGHT][0] = 109; // Width
padding[PAD_L_RIGHT][1] = 25; // Height
padding[PAD_L_RIGHT][2] = 377; // X
padding[PAD_L_RIGHT][3] = 552; // Y
// Left Joystick left
padding[PAD_L_LEFT][0] = 109; // Width
padding[PAD_L_LEFT][1] = 25; // Height
padding[PAD_L_LEFT][2] = 268; // X
padding[PAD_L_LEFT][3] = 552; // Y
padding[PAD_L_LEFT][0] = 109; // Width
padding[PAD_L_LEFT][1] = 25; // Height
padding[PAD_L_LEFT][2] = 268; // X
padding[PAD_L_LEFT][3] = 552; // Y
// L3
padding[PAD_L3][0] = 218; // Width
padding[PAD_L3][1] = 28; // Height
padding[PAD_L3][2] = 268; // X
padding[PAD_L3][3] = 641; // Y
padding[PAD_L3][0] = 218; // Width
padding[PAD_L3][1] = 28; // Height
padding[PAD_L3][2] = 268; // X
padding[PAD_L3][3] = 641; // Y
// Right Joystick up
padding[PAD_R_UP][0] = 100; // Width
padding[PAD_R_UP][1] = 25; // Height
padding[PAD_R_UP][2] = 555; // X
padding[PAD_R_UP][3] = 527; // Y
padding[PAD_R_UP][0] = 100; // Width
padding[PAD_R_UP][1] = 25; // Height
padding[PAD_R_UP][2] = 555; // X
padding[PAD_R_UP][3] = 527; // Y
// Right Joystick down
padding[PAD_R_DOWN][0] = 100; // Width
padding[PAD_R_DOWN][1] = 25; // Height
padding[PAD_R_DOWN][2] = 555; // X
padding[PAD_R_DOWN][3] = 577; // Y
padding[PAD_R_DOWN][0] = 100; // Width
padding[PAD_R_DOWN][1] = 25; // Height
padding[PAD_R_DOWN][2] = 555; // X
padding[PAD_R_DOWN][3] = 577; // Y
// Right Joystick right
padding[PAD_R_RIGHT][0] = 109; // Width
padding[PAD_R_RIGHT][1] = 25; // Height
padding[PAD_R_RIGHT][2] = 607; // X
padding[PAD_R_RIGHT][3] = 552; // Y
padding[PAD_R_RIGHT][0] = 109; // Width
padding[PAD_R_RIGHT][1] = 25; // Height
padding[PAD_R_RIGHT][2] = 607; // X
padding[PAD_R_RIGHT][3] = 552; // Y
// Right Joystick left
padding[PAD_R_LEFT][0] = 109; // Width
padding[PAD_R_LEFT][1] = 25; // Height
padding[PAD_R_LEFT][2] = 498; // X
padding[PAD_R_LEFT][3] = 552; // Y
padding[PAD_R_LEFT][0] = 109; // Width
padding[PAD_R_LEFT][1] = 25; // Height
padding[PAD_R_LEFT][2] = 498; // X
padding[PAD_R_LEFT][3] = 552; // Y
// R3
padding[PAD_R3][0] = 218; // Width
padding[PAD_R3][1] = 28; // Height
padding[PAD_R3][2] = 498; // X
padding[PAD_R3][3] = 641; // Y
padding[PAD_R3][0] = 218; // Width
padding[PAD_R3][1] = 28; // Height
padding[PAD_R3][2] = 498; // X
padding[PAD_R3][3] = 641; // Y
// Start
padding[PAD_START][0] = 218; // Width
padding[PAD_START][1] = 28; // Height
padding[PAD_START][2] = 503; // X
padding[PAD_START][3] = 34; // Y
padding[PAD_START][0] = 218; // Width
padding[PAD_START][1] = 28; // Height
padding[PAD_START][2] = 503; // X
padding[PAD_START][3] = 34; // Y
// Select
padding[PAD_SELECT][0] = 218; // Width
padding[PAD_SELECT][1] = 28; // Height
padding[PAD_SELECT][2] = 273; // X
padding[PAD_SELECT][3] = 34; // Y
padding[PAD_SELECT][0] = 218; // Width
padding[PAD_SELECT][1] = 28; // Height
padding[PAD_SELECT][2] = 273; // X
padding[PAD_SELECT][3] = 34; // Y
// Analog
padding[Analog][0] = 218; // Width
padding[Analog][1] = 28; // Height
padding[Analog][2] = 50; // X
padding[Analog][3] = 452; // Y
padding[Analog][0] = 218; // Width
padding[Analog][1] = 28; // Height
padding[Analog][2] = 50; // X
padding[Analog][3] = 452; // Y
// Left Joystick Configuration
padding[JoyL_config][0] = 180; // Width
padding[JoyL_config][1] = 28; // Height
padding[JoyL_config][2] = 50; // X
padding[JoyL_config][3] = 550; // Y
padding[JoyL_config][0] = 180; // Width
padding[JoyL_config][1] = 28; // Height
padding[JoyL_config][2] = 50; // X
padding[JoyL_config][3] = 550; // Y
// Right Joystick Configuration
padding[JoyR_config][0] = 180; // Width
padding[JoyR_config][1] = 28; // Height
padding[JoyR_config][2] = 764; // X
padding[JoyR_config][3] = 550; // Y
padding[JoyR_config][0] = 180; // Width
padding[JoyR_config][1] = 28; // Height
padding[JoyR_config][2] = 764; // X
padding[JoyR_config][3] = 550; // Y
// Gamepad Configuration
padding[Gamepad_config][0] = 180; // Width
padding[Gamepad_config][1] = 28; // Height
padding[Gamepad_config][2] = 50; // X
padding[Gamepad_config][3] = 585; // Y
padding[Gamepad_config][0] = 180; // Width
padding[Gamepad_config][1] = 28; // Height
padding[Gamepad_config][2] = 50; // X
padding[Gamepad_config][3] = 585; // Y
// Set All Buttons
padding[Set_all][0] = 180; // Width
padding[Set_all][1] = 28; // Height
padding[Set_all][2] = 764; // X
padding[Set_all][3] = 585; // Y
padding[Set_all][0] = 180; // Width
padding[Set_all][1] = 28; // Height
padding[Set_all][2] = 764; // X
padding[Set_all][3] = 585; // Y
// Apply modifications without exit
padding[Apply][0] = 70; // Width
padding[Apply][1] = 28; // Height
padding[Apply][2] = 833; // X
padding[Apply][3] = 642; // Y
padding[Apply][0] = 70; // Width
padding[Apply][1] = 28; // Height
padding[Apply][2] = 833; // X
padding[Apply][3] = 642; // Y
// Ok button
padding[Ok][0] = 70; // Width
padding[Ok][1] = 28; // Height
padding[Ok][2] = 913; // X
padding[Ok][3] = 642; // Y
padding[Ok][0] = 70; // Width
padding[Ok][1] = 28; // Height
padding[Ok][2] = 913; // X
padding[Ok][3] = 642; // Y
// Cancel button
padding[Cancel][0] = 70; // Width
padding[Cancel][1] = 28; // Height
padding[Cancel][2] = 753; // X
padding[Cancel][3] = 642; // Y
padding[Cancel][0] = 70; // Width
padding[Cancel][1] = 28; // Height
padding[Cancel][2] = 753; // X
padding[Cancel][3] = 642; // Y
// create a new Notebook
m_tab_gamepad = new wxNotebook(this, wxID_ANY);
@ -250,18 +250,18 @@ Dialog::Dialog()
sstm << label << i;
// New page creation
m_tab_gamepad->AddPage(
m_pan_tabs[i], // Parent
wxString(sstm.str().c_str(), wxConvUTF8) // Title
m_pan_tabs[i], // Parent
wxString(sstm.str().c_str(), wxConvUTF8) // Title
);
for (int j = 0; j < BUTTONS_LENGHT; ++j) {
// Gamepad buttons
m_bt_gamepad[i][j] = new wxButton(
m_pan_tabs[i], // Parent
wxID_HIGHEST + j + 1, // ID
_T("Undefined"), // Label
wxPoint(padding[j][2], padding[j][3]), // Position
wxSize(padding[j][0], padding[j][1]) // Size
m_pan_tabs[i], // Parent
wxID_HIGHEST + j + 1, // ID
_T("Undefined"), // Label
wxPoint(padding[j][2], padding[j][3]), // Position
wxSize(padding[j][0], padding[j][1]) // Size
);
}
// Redefine others gui buttons label
@ -292,9 +292,9 @@ Dialog::Dialog()
void Dialog::InitDialog()
{
GamePad::EnumerateGamePads(s_vgamePad); // activate gamepads
LoadConfig(); // Load configuration from the ini file
repopulate(); // Set label and fit simulated key array
GamePad::EnumerateGamePads(s_vgamePad); // activate gamepads
LoadConfig(); // Load configuration from the ini file
repopulate(); // Set label and fit simulated key array
}
/****************************************/
@ -304,54 +304,54 @@ void Dialog::InitDialog()
void Dialog::OnButtonClicked(wxCommandEvent &event)
{
// Affichage d'un message à chaque clic sur le bouton
wxButton *bt_tmp = (wxButton *)event.GetEventObject(); // get the button object
int bt_id = bt_tmp->GetId() - wxID_HIGHEST - 1; // get the real ID
int gamepad_id = m_tab_gamepad->GetSelection(); // get the tab ID (equivalent to the gamepad id)
if (bt_id >= 0 && bt_id <= PAD_R_LEFT) { // if the button ID is a gamepad button
bt_tmp->Disable(); // switch the button state to "Disable"
wxButton *bt_tmp = (wxButton *)event.GetEventObject(); // get the button object
int bt_id = bt_tmp->GetId() - wxID_HIGHEST - 1; // get the real ID
int gamepad_id = m_tab_gamepad->GetSelection(); // get the tab ID (equivalent to the gamepad id)
if (bt_id >= 0 && bt_id <= PAD_R_LEFT) { // if the button ID is a gamepad button
bt_tmp->Disable(); // switch the button state to "Disable"
config_key(gamepad_id, bt_id);
bt_tmp->Enable(); // switch the button state to "Enable"
} else if (bt_id == Gamepad_config) { // If the button ID is equals to the Gamepad_config button ID
bt_tmp->Enable(); // switch the button state to "Enable"
} else if (bt_id == Gamepad_config) { // If the button ID is equals to the Gamepad_config button ID
GamepadConfiguration gamepad_config(gamepad_id, this);
gamepad_config.InitGamepadConfiguration();
gamepad_config.ShowModal();
} else if (bt_id == JoyL_config) { // If the button ID is equals to the JoyL_config button ID
} else if (bt_id == JoyL_config) { // If the button ID is equals to the JoyL_config button ID
JoystickConfiguration joystick_config(gamepad_id, true, this);
joystick_config.InitJoystickConfiguration();
joystick_config.ShowModal();
} else if (bt_id == JoyR_config) { // If the button ID is equals to the JoyR_config button ID
} else if (bt_id == JoyR_config) { // If the button ID is equals to the JoyR_config button ID
JoystickConfiguration joystick_config(gamepad_id, false, this);
joystick_config.InitJoystickConfiguration();
joystick_config.ShowModal();
} else if (bt_id == Set_all) { // If the button ID is equals to the Set_all button ID
} else if (bt_id == Set_all) { // If the button ID is equals to the Set_all button ID
for (int i = 0; i < MAX_KEYS; ++i) {
bt_tmp = m_bt_gamepad[gamepad_id][i];
switch (i) {
case PAD_L_UP: // Left joystick (Up) ↑
case PAD_L_UP: // Left joystick (Up) ↑
m_pan_tabs[gamepad_id]->ShowImg(img_l_arrow_up);
break;
case PAD_L_RIGHT: // Left joystick (Right) →
case PAD_L_RIGHT: // Left joystick (Right) →
m_pan_tabs[gamepad_id]->ShowImg(img_l_arrow_right);
break;
case PAD_L_DOWN: // Left joystick (Down) ↓
case PAD_L_DOWN: // Left joystick (Down) ↓
m_pan_tabs[gamepad_id]->ShowImg(img_l_arrow_bottom);
break;
case PAD_L_LEFT: // Left joystick (Left) ←
case PAD_L_LEFT: // Left joystick (Left) ←
m_pan_tabs[gamepad_id]->ShowImg(img_l_arrow_left);
break;
case PAD_R_UP: // Right joystick (Up) ↑
case PAD_R_UP: // Right joystick (Up) ↑
m_pan_tabs[gamepad_id]->ShowImg(img_r_arrow_up);
break;
case PAD_R_RIGHT: // Right joystick (Right) →
case PAD_R_RIGHT: // Right joystick (Right) →
m_pan_tabs[gamepad_id]->ShowImg(img_r_arrow_right);
break;
case PAD_R_DOWN: // Right joystick (Down) ↓
case PAD_R_DOWN: // Right joystick (Down) ↓
m_pan_tabs[gamepad_id]->ShowImg(img_r_arrow_bottom);
break;
case PAD_R_LEFT: // Right joystick (Left) ←
case PAD_R_LEFT: // Right joystick (Left) ←
m_pan_tabs[gamepad_id]->ShowImg(img_r_arrow_left);
break;
default:
@ -362,28 +362,28 @@ void Dialog::OnButtonClicked(wxCommandEvent &event)
m_pan_tabs[gamepad_id]->Update();
config_key(gamepad_id, i);
switch (i) {
case PAD_L_UP: // Left joystick (Up) ↑
case PAD_L_UP: // Left joystick (Up) ↑
m_pan_tabs[gamepad_id]->HideImg(img_l_arrow_up);
break;
case PAD_L_RIGHT: // Left joystick (Right) →
case PAD_L_RIGHT: // Left joystick (Right) →
m_pan_tabs[gamepad_id]->HideImg(img_l_arrow_right);
break;
case PAD_L_DOWN: // Left joystick (Down) ↓
case PAD_L_DOWN: // Left joystick (Down) ↓
m_pan_tabs[gamepad_id]->HideImg(img_l_arrow_bottom);
break;
case PAD_L_LEFT: // Left joystick (Left) ←
case PAD_L_LEFT: // Left joystick (Left) ←
m_pan_tabs[gamepad_id]->HideImg(img_l_arrow_left);
break;
case PAD_R_UP: // Right joystick (Up) ↑
case PAD_R_UP: // Right joystick (Up) ↑
m_pan_tabs[gamepad_id]->HideImg(img_r_arrow_up);
break;
case PAD_R_RIGHT: // Right joystick (Right) →
case PAD_R_RIGHT: // Right joystick (Right) →
m_pan_tabs[gamepad_id]->HideImg(img_r_arrow_right);
break;
case PAD_R_DOWN: // Right joystick (Down) ↓
case PAD_R_DOWN: // Right joystick (Down) ↓
m_pan_tabs[gamepad_id]->HideImg(img_r_arrow_bottom);
break;
case PAD_R_LEFT: // Right joystick (Left) ←
case PAD_R_LEFT: // Right joystick (Left) ←
m_pan_tabs[gamepad_id]->HideImg(img_r_arrow_left);
break;
default:
@ -392,15 +392,15 @@ void Dialog::OnButtonClicked(wxCommandEvent &event)
}
m_pan_tabs[gamepad_id]->Refresh();
m_pan_tabs[gamepad_id]->Update();
usleep(500000); // give enough time to the user to release the button
usleep(500000); // give enough time to the user to release the button
}
} else if (bt_id == Ok) { // If the button ID is equals to the Ok button ID
SaveConfig(); // Save the configuration
Close(); // Close the window
} else if (bt_id == Apply) { // If the button ID is equals to the Apply button ID
SaveConfig(); // Save the configuration
} else if (bt_id == Cancel) { // If the button ID is equals to the cancel button ID
Close(); // Close the window
} else if (bt_id == Ok) { // If the button ID is equals to the Ok button ID
SaveConfig(); // Save the configuration
Close(); // Close the window
} else if (bt_id == Apply) { // If the button ID is equals to the Apply button ID
SaveConfig(); // Save the configuration
} else if (bt_id == Cancel) { // If the button ID is equals to the cancel button ID
Close(); // Close the window
}
}
@ -438,7 +438,7 @@ void Dialog::JoystickEvent(wxTimerEvent &event)
} else if (map >= PAD_R_UP && map <= PAD_R_LEFT) {
m_pan_tabs[events.jaxis.which]->MoveJoystick(events.jaxis.axis, events.jaxis.value);
m_pan_tabs[events.jaxis.which]->ShowImg(img_right_cursor);
} else if (map < PAD_L_UP) { // if this is not a joystick
} else if (map < PAD_L_UP) { // if this is not a joystick
m_pan_tabs[events.jaxis.which]->ShowImg(map);
}
}
@ -449,7 +449,7 @@ void Dialog::JoystickEvent(wxTimerEvent &event)
it2 = m_map_images[events.jaxis.which].find(key);
if (it2 != m_map_images[events.jaxis.which].end()) {
map = m_map_images[events.jaxis.which][key];
if (map < PAD_L_UP) { // if this is not a joystick
if (map < PAD_L_UP) { // if this is not a joystick
m_pan_tabs[events.jaxis.which]->HideImg(map);
}
break;
@ -519,7 +519,7 @@ void Dialog::JoystickEvent(wxTimerEvent &event)
break;
}
}
#endif // SDL_BUILD
#endif // SDL_BUILD
}
/****************************************/

28
plugins/onepad/Linux/dialog.h
View File

@ -48,17 +48,17 @@
// see onepad.h for more details about gamepad button id
enum gui_buttons {
Analog = PAD_R_LEFT + 1, // Analog button (not yet supported ?)
JoyL_config, // Left Joystick Configuration
JoyR_config, // Right Joystick Configuration
Gamepad_config, // Gamepad Configuration
Set_all, // Set all buttons
Apply, // Apply modifications without exit
Ok, // Apply modifications and exit
Cancel // Exit without apply modificatons
Analog = PAD_R_LEFT + 1, // Analog button (not yet supported ?)
JoyL_config, // Left Joystick Configuration
JoyR_config, // Right Joystick Configuration
Gamepad_config, // Gamepad Configuration
Set_all, // Set all buttons
Apply, // Apply modifications without exit
Ok, // Apply modifications and exit
Cancel // Exit without apply modificatons
};
#define BUTTONS_LENGHT 32 // numbers of buttons on the gamepad
#define BUTTONS_LENGHT 32 // numbers of buttons on the gamepad
#define UPDATE_TIME 5
#define DEFAULT_WIDTH 1000
#define DEFAULT_HEIGHT 740
@ -66,11 +66,11 @@ enum gui_buttons {
class Dialog : public wxDialog
{
// Panels
opPanel *m_pan_tabs[GAMEPAD_NUMBER]; // Gamepad Tabs box
opPanel *m_pan_tabs[GAMEPAD_NUMBER]; // Gamepad Tabs box
// Notebooks
wxNotebook *m_tab_gamepad; // Joysticks Tabs
wxNotebook *m_tab_gamepad; // Joysticks Tabs
// Buttons
wxButton *m_bt_gamepad[GAMEPAD_NUMBER][BUTTONS_LENGHT]; // Joystick button use to modify the button mapping
wxButton *m_bt_gamepad[GAMEPAD_NUMBER][BUTTONS_LENGHT]; // Joystick button use to modify the button mapping
// Contain all simulated key
u32 m_simulatedKeys[GAMEPAD_NUMBER][MAX_KEYS];
// Timer
@ -95,6 +95,6 @@ public:
void show();
};
extern void DisplayDialog(); // Main function
extern void DisplayDialog(); // Main function
#endif // __DIALOG_H__
#endif // __DIALOG_H__

4
plugins/onepad/Linux/ini.cpp
View File

@ -46,7 +46,7 @@ string KeyName(int pad, int key, int keysym)
case 3:
sprintf(&tmp[0], "Mouse Right");
break;
default: // Use only number for extra button
default: // Use only number for extra button
sprintf(&tmp[0], "Mouse %d", keysym);
}
} else {
@ -164,7 +164,7 @@ void LoadConfig()
f = fopen(iniFile.c_str(), "r");
if (f == NULL) {
printf("OnePAD: failed to load ini %s\n", iniFile.c_str());
SaveConfig(); //save and return
SaveConfig(); //save and return
return;
}

4
plugins/onepad/Linux/opPanel.h
View File

@ -46,7 +46,7 @@ enum gui_img {
img_left_cursor,
img_right_cursor,
img_analog,
img_background, // background pic
img_background, // background pic
img_l_arrow_up,
img_l_arrow_right,
img_l_arrow_bottom,
@ -74,4 +74,4 @@ public:
void MoveJoystick(int, int);
};
#endif // __OPPANEL_H__
#endif // __OPPANEL_H__

22
plugins/onepad/SDL/joystick.cpp
View File

@ -20,7 +20,7 @@
*/
#include "joystick.h"
#include <signal.h> // sigaction
#include <signal.h> // sigaction
//////////////////////////
// Joystick definitions //
@ -85,16 +85,16 @@ void JoystickInfo::GenerateDefaultEffect()
#if SDL_MAJOR_VERSION >= 2
for (int i = 0; i < NB_EFFECT; i++) {
SDL_HapticEffect effect;
memset(&effect, 0, sizeof(SDL_HapticEffect)); // 0 is safe default
memset(&effect, 0, sizeof(SDL_HapticEffect)); // 0 is safe default
SDL_HapticDirection direction;
direction.type = SDL_HAPTIC_POLAR; // We'll be using polar direction encoding.
direction.type = SDL_HAPTIC_POLAR; // We'll be using polar direction encoding.
direction.dir[0] = 18000;
effect.periodic.direction = direction;
effect.periodic.period = 10;
effect.periodic.magnitude = (Sint16)(conf->get_ff_intensity()); // Effect at maximum instensity
effect.periodic.magnitude = (Sint16)(conf->get_ff_intensity()); // Effect at maximum instensity
effect.periodic.offset = 0;
effect.periodic.phase = 18000;
effect.periodic.length = 125; // 125ms feels quite near to original
effect.periodic.length = 125; // 125ms feels quite near to original
effect.periodic.delay = 0;
effect.periodic.attack_length = 0;
effects[i] = effect;
@ -113,7 +113,7 @@ void JoystickInfo::Rumble(int type, int pad)
if (haptic == NULL)
return;
if (first) { // If done multiple times, device memory will be filled
if (first) { // If done multiple times, device memory will be filled
first = 0;
GenerateDefaultEffect();
/** Sine and triangle are quite probably the best, don't change that lightly and if you do
@ -157,7 +157,7 @@ void JoystickInfo::Destroy()
#endif
#if SDL_MAJOR_VERSION >= 2
#if SDL_MINOR_VERSION >= 4 // Version before 2.0.4 are bugged, JoystickClose crashes randomly
#if SDL_MINOR_VERSION >= 4 // Version before 2.0.4 are bugged, JoystickClose crashes randomly
if (joy)
SDL_JoystickClose(joy);
#endif
@ -202,9 +202,9 @@ bool JoystickInfo::Init(int id)
// FIXME: people need to restart the plugin to take the option into account.
bool hack_enabled = (conf->pad_options[0].sixaxis_pressure) || (conf->pad_options[1].sixaxis_pressure);
if (found_hack != string::npos && numaxes > 4 && hack_enabled) {
numbuttons = 4; // (select, start, l3, r3)
numbuttons = 4; // (select, start, l3, r3)
// Enable this hack in bluetooth too. It avoid to restart the onepad gui
numbuttons += 4; // the 4 hat buttons
numbuttons += 4; // the 4 hat buttons
}
#if SDL_MAJOR_VERSION >= 2
@ -237,7 +237,7 @@ bool JoystickInfo::TestForce(float strength = 0.60)
#if SDL_MAJOR_VERSION >= 2
// This code just use standard rumble to check that SDL handles the pad correctly! --3kinox
if (haptic == NULL)
return false; // Otherwise, core dump!
return false; // Otherwise, core dump!
SDL_HapticRumbleInit(haptic);
// Make the haptic pad rumble 60% strength for half a second, shoudld be enough for user to see if it works or not
if (SDL_HapticRumblePlay(haptic, strength, 400) != 0) {
@ -308,7 +308,7 @@ bool JoystickInfo::PollAxes(u32 &pkey)
// Normally, old_value contains the release state so it can be used to detect the types of axis.
bool is_full_axis = (old_value < full_axis_ceil);
if ((!is_full_axis && abs(value) <= half_axis_ceil) || (is_full_axis && value <= full_axis_ceil)) // we don't want this
if ((!is_full_axis && abs(value) <= half_axis_ceil) || (is_full_axis && value <= full_axis_ceil)) // we don't want this
{
continue;
}

8
plugins/onepad/SDL/joystick.h
View File

@ -29,7 +29,7 @@
#include "GamePad.h"
#include "onepad.h"
#include "controller.h"
#define NB_EFFECT 2 // Don't use more than two, ps2 only has one for big motor and one for small(like most systems)
#define NB_EFFECT 2 // Don't use more than two, ps2 only has one for big motor and one for small(like most systems)
// holds all joystick info
class JoystickInfo : GamePad
{
@ -49,8 +49,8 @@ public:
Destroy();
}
JoystickInfo(const JoystickInfo &); // copy constructor
JoystickInfo &operator=(const JoystickInfo &); // assignment
JoystickInfo(const JoystickInfo &); // copy constructor
JoystickInfo &operator=(const JoystickInfo &); // assignment
void Destroy();
// opens handles to all possible joysticks
@ -58,7 +58,7 @@ public:
void Rumble(int type, int pad);
bool Init(int id); // opens a handle and gets information
bool Init(int id); // opens a handle and gets information
bool TestForce(float);

16
plugins/onepad/controller.h
View File

@ -20,7 +20,7 @@
*/
#pragma once
#include <string.h> // for memset
#include <string.h> // for memset
#define MAX_KEYS 24
enum KeyType {
@ -68,9 +68,9 @@ public:
u16 mouse_r : 1;
u16 sixaxis_usb : 1;
u16 sixaxis_pressure : 1;
u16 _free : 7; // The 8 remaining bits are unused, do what you wish with them ;)
} pad_options[GAMEPAD_NUMBER]; // One for each pads
u32 packed_options; // Only first 8 bits of each 16 bits series are really used, rest is padding
u16 _free : 7; // The 8 remaining bits are unused, do what you wish with them ;)
} pad_options[GAMEPAD_NUMBER]; // One for each pads
u32 packed_options; // Only first 8 bits of each 16 bits series are really used, rest is padding
};
u32 keys[GAMEPAD_NUMBER][MAX_KEYS];
@ -84,19 +84,19 @@ public:
{
memset(&keys, 0, sizeof(keys));
log = packed_options = joyid_map = 0;
ff_intensity = 0x7FFF; // set it at max value by default
ff_intensity = 0x7FFF; // set it at max value by default
sensibility = 500;
for (int pad = 0; pad < GAMEPAD_NUMBER; pad++) {
keysym_map[pad].clear();
set_joyid((u32)pad, (u32)pad); // define id mapping for each gamepad
set_joyid((u32)pad, (u32)pad); // define id mapping for each gamepad
}
}
void set_joyid(u32 pad, u32 joy_id)
{
int shift = 8 * pad;
joyid_map &= ~(0xFF << shift); // clear
joyid_map |= (joy_id & 0xFF) << shift; // set
joyid_map &= ~(0xFF << shift); // clear
joyid_map |= (joy_id & 0xFF) << shift; // set
}
u32 get_joyid(u32 pad)

4
plugins/onepad/onepad.cpp
View File

@ -48,7 +48,7 @@ bool toggleAutoRepeat = false;
const u32 version = PS2E_PAD_VERSION;
const u32 revision = 1;
const u32 build = 3; // increase that with each version
const u32 build = 3; // increase that with each version
#define PAD_SAVE_STATE_VERSION ((revision << 8) | (build << 0))
FILE *padLog = NULL;
@ -241,7 +241,7 @@ PADclose()
EXPORT_C_(u32)
PADquery()
{
return 3; // both
return 3; // both
}
EXPORT_C_(s32)

58
plugins/onepad/onepad.h
View File

@ -22,7 +22,7 @@
#ifndef __PAD_H__
#define __PAD_H__
#define GAMEPAD_NUMBER 2 // numbers of gamepad
#define GAMEPAD_NUMBER 2 // numbers of gamepad
#include <stdio.h>
#include <assert.h>
@ -88,38 +88,38 @@ enum PadCommands {
CMD_CONFIG_MODE = 0x43,
CMD_SET_MODE_AND_LOCK = 0x44,
CMD_QUERY_MODEL_AND_MODE = 0x45,
CMD_QUERY_ACT = 0x46, // ??
CMD_QUERY_COMB = 0x47, // ??
CMD_QUERY_MODE = 0x4C, // QUERY_MODE ??
CMD_QUERY_ACT = 0x46, // ??
CMD_QUERY_COMB = 0x47, // ??
CMD_QUERY_MODE = 0x4C, // QUERY_MODE ??
CMD_VIBRATION_TOGGLE = 0x4D,
CMD_SET_DS2_NATIVE_MODE = 0x4F // SET_DS2_NATIVE_MODE
CMD_SET_DS2_NATIVE_MODE = 0x4F // SET_DS2_NATIVE_MODE
};
enum gamePadValues {
PAD_L2 = 0, // L2 button
PAD_R2, // R2 button
PAD_L1, // L1 button
PAD_R1, // R1 button
PAD_TRIANGLE, // Triangle button ▲
PAD_CIRCLE, // Circle button ●
PAD_CROSS, // Cross button ✖
PAD_SQUARE, // Square button ■
PAD_SELECT, // Select button
PAD_L3, // Left joystick button (L3)
PAD_R3, // Right joystick button (R3)
PAD_START, // Start button
PAD_UP, // Directional pad ↑
PAD_RIGHT, // Directional pad →
PAD_DOWN, // Directional pad ↓
PAD_LEFT, // Directional pad ←
PAD_L_UP, // Left joystick (Up) ↑
PAD_L_RIGHT, // Left joystick (Right) →
PAD_L_DOWN, // Left joystick (Down) ↓
PAD_L_LEFT, // Left joystick (Left) ←
PAD_R_UP, // Right joystick (Up) ↑
PAD_R_RIGHT, // Right joystick (Right) →
PAD_R_DOWN, // Right joystick (Down) ↓
PAD_R_LEFT // Right joystick (Left) ←
PAD_L2 = 0, // L2 button
PAD_R2, // R2 button
PAD_L1, // L1 button
PAD_R1, // R1 button
PAD_TRIANGLE, // Triangle button ▲
PAD_CIRCLE, // Circle button ●
PAD_CROSS, // Cross button ✖
PAD_SQUARE, // Square button ■
PAD_SELECT, // Select button
PAD_L3, // Left joystick button (L3)
PAD_R3, // Right joystick button (R3)
PAD_START, // Start button
PAD_UP, // Directional pad ↑
PAD_RIGHT, // Directional pad →
PAD_DOWN, // Directional pad ↓
PAD_LEFT, // Directional pad ←
PAD_L_UP, // Left joystick (Up) ↑
PAD_L_RIGHT, // Left joystick (Right) →
PAD_L_DOWN, // Left joystick (Down) ↓
PAD_L_LEFT, // Left joystick (Left) ←
PAD_R_UP, // Right joystick (Up) ↑
PAD_R_RIGHT, // Right joystick (Right) →
PAD_R_DOWN, // Right joystick (Down) ↓
PAD_R_LEFT // Right joystick (Left) ←
};
extern keyEvent event;

4
plugins/onepad/state_management.cpp
View File

@ -244,7 +244,7 @@ u8 pad_poll(u8 value)
query.response[3] = (buttons >> 8) & 0xFF;
query.response[4] = (buttons >> 0) & 0xFF;
if (pad->mode != MODE_DIGITAL) { // ANALOG || DS2 native
if (pad->mode != MODE_DIGITAL) { // ANALOG || DS2 native
query.numBytes = 9;
query.response[5] = key_status->get(query.port, PAD_R_RIGHT);
@ -252,7 +252,7 @@ u8 pad_poll(u8 value)
query.response[7] = key_status->get(query.port, PAD_L_RIGHT);
query.response[8] = key_status->get(query.port, PAD_L_UP);
if (pad->mode != MODE_ANALOG) { // DS2 native
if (pad->mode != MODE_ANALOG) { // DS2 native
query.numBytes = 21;
query.response[9] = !test_bit(buttons, 13) ? key_status->get(query.port, PAD_RIGHT) : 0;

32
plugins/spu2-x/src/ADSR.cpp
View File

@ -23,7 +23,7 @@ static const int InvExpOffsets[] = {0, 4, 6, 8, 9, 10, 11, 12};
static u32 PsxRates[160];
void InitADSR() // INIT ADSR
void InitADSR() // INIT ADSR
{
for (int i = 0; i < (32 + 128); i++) {
int shift = (i - 32) >> 2;
@ -57,7 +57,7 @@ bool V_ADSR::Calculate()
Phase = 5;
switch (Phase) {
case 1: // attack
case 1: // attack
if (Value == ADSR_MAX_VOL) {
// Already maxed out. Progress phase and nothing more:
Phase++;
@ -79,7 +79,7 @@ bool V_ADSR::Calculate()
}
break;
case 2: // decay
case 2: // decay
{
u32 off = InvExpOffsets[(Value >> 28) & 7];
Value -= PsxRates[((DecayRate ^ 0x1f) * 4) - 0x18 + off + 32];
@ -95,26 +95,26 @@ bool V_ADSR::Calculate()
}
} break;
case 3: // sustain
case 3: // sustain
{
// 0x7f disables sustain (infinite sustain)
if (SustainRate == 0x7f)
return true;
if (SustainMode & 2) // decreasing
if (SustainMode & 2) // decreasing
{
if (SustainMode & 4) // exponential
if (SustainMode & 4) // exponential
{
u32 off = InvExpOffsets[(Value >> 28) & 7];
Value -= PsxRates[(SustainRate ^ 0x7f) - 0x1b + off + 32];
} else // linear
} else // linear
Value -= PsxRates[(SustainRate ^ 0x7f) - 0xf + 32];
if (Value <= 0) {
Value = 0;
Phase++;
}
} else { // increasing
} else { // increasing
if ((SustainMode & 4) && (Value >= 0x60000000))
Value += PsxRates[(SustainRate ^ 0x7f) - 0x18 + 32];
else
@ -128,18 +128,18 @@ bool V_ADSR::Calculate()
}
} break;
case 4: // sustain end
case 4: // sustain end
Value = (SustainMode & 2) ? 0 : ADSR_MAX_VOL;
if (Value == 0)
Phase = 6;
break;
case 5: // release
if (ReleaseMode) // exponential
case 5: // release
if (ReleaseMode) // exponential
{
u32 off = InvExpOffsets[(Value >> 28) & 7];
Value -= PsxRates[((ReleaseRate ^ 0x1f) * 4) - 0x18 + off + 32];
} else { // linear
} else { // linear
//Value-=PsxRates[((ReleaseRate^0x1f)*4)-0xc+32];
if (ReleaseRate != 0x1f)
Value -= (1 << (0x1f - ReleaseRate));
@ -151,7 +151,7 @@ bool V_ADSR::Calculate()
}
break;
case 6: // release end
case 6: // release end
Value = 0;
break;
@ -195,7 +195,7 @@ void V_VolumeSlide::Update()
if (value < 0) {
value = 0;
Mode = 0; // disable slide
Mode = 0; // disable slide
}
} else {
// Increment
@ -208,10 +208,10 @@ void V_VolumeSlide::Update()
// linear / Pseudo below 75% (they're the same)
value += PsxRates[(Increment ^ 0x7f) - 0x10 + 32];
if (value < 0) // wrapped around the "top"?
if (value < 0) // wrapped around the "top"?
{
value = 0x7fffffff;
Mode = 0; // disable slide
Mode = 0; // disable slide
}
}

2
plugins/spu2-x/src/Config.h
View File

@ -64,7 +64,7 @@ extern wxString RegDumpFileName;
extern int Interpolation;
extern int numSpeakers;
extern bool EffectsDisabled;
extern float FinalVolume; // Global / pre-scale
extern float FinalVolume; // Global / pre-scale
extern bool AdvancedVolumeControl;
extern float VolumeAdjustFLdb;
extern float VolumeAdjustCdb;

2
plugins/spu2-x/src/Debug.h
View File

@ -68,4 +68,4 @@ using WaveDump::CoreSrc_PreReverb;
using WaveDump::CoreSrc_PostReverb;
using WaveDump::CoreSrc_External;
#endif // DEBUG_H_INCLUDED //
#endif // DEBUG_H_INCLUDED //

16
plugins/spu2-x/src/DecodeDPLII.cpp
View File

@ -121,19 +121,19 @@ void DPLII::Convert(s16 *obuffer, s32 ValL, s32 ValR)
LR = (s32)(lpf_r.sample((ValR >> 4) / pow_2_31) * pow_2_31);
LFE = (LL + LR) >> 4;
C = (ValL + ValR) >> 1; //16.8
C = (ValL + ValR) >> 1; //16.8
ValL -= C; //16.8
ValR -= C; //16.8
ValL -= C; //16.8
ValR -= C; //16.8
L = ValL >> 8; //16.0
R = ValR >> 8; //16.0
C = C >> 8; //16.0
L = ValL >> 8; //16.0
R = ValR >> 8; //16.0
C = C >> 8; //16.0
const s32 Cfl = 1 + sLogTable[Gfl];
const s32 Cfr = 1 + sLogTable[Gfr];
const s32 VL = (ValL >> 4) * Cfl; //16.12
const s32 VL = (ValL >> 4) * Cfl; //16.12
const s32 VR = (ValR >> 4) * Cfr;
const s32 SC = (VL - VR) >> 15;
@ -145,7 +145,7 @@ void DPLII::Convert(s16 *obuffer, s32 ValL, s32 ValR)
obuffer[0] = spdif_data[0] + (((L * Config_DSound51.GainL)) >> 8) + AddCX;
obuffer[1] = spdif_data[1] + (((R * Config_DSound51.GainR)) >> 8) + AddCX;
obuffer[2] = spdif_data[2] + (((C * Config_DSound51.GainC)) >> 8); // - AddCX;
obuffer[2] = spdif_data[2] + (((C * Config_DSound51.GainC)) >> 8); // - AddCX;
obuffer[3] = spdif_data[3] + (((LFE * Config_DSound51.GainLFE)) >> 8);
obuffer[4] = spdif_data[4] + (((SL * Config_DSound51.GainSL)) >> 8);
obuffer[5] = spdif_data[5] + (((SR * Config_DSound51.GainSR)) >> 8);

14
plugins/spu2-x/src/Dma.cpp
View File

@ -18,7 +18,7 @@
#include "Global.h"
#include "Dma.h"
#include "PS2E-spu2.h" // temporary until I resolve cyclePtr/TimeUpdate dependencies.
#include "PS2E-spu2.h" // temporary until I resolve cyclePtr/TimeUpdate dependencies.
extern u8 callirq;
@ -95,10 +95,10 @@ void V_Core::LogAutoDMA(FILE *fp)
fwrite(DMAPtr + InputDataProgress, 0x400, 1, fp);
}
void V_Core::AutoDMAReadBuffer(int mode) //mode: 0= split stereo; 1 = do not split stereo
void V_Core::AutoDMAReadBuffer(int mode) //mode: 0= split stereo; 1 = do not split stereo
{
#ifndef ENABLE_NEW_IOPDMA_SPU2
int spos = ((InputPosRead + 0xff) & 0x100); //starting position of the free buffer
int spos = ((InputPosRead + 0xff) & 0x100); //starting position of the free buffer
LogAutoDMA(Index ? ADMA7LogFile : ADMA4LogFile);
@ -190,7 +190,7 @@ void V_Core::StartADMAWrite(u16 *pMem, u32 sz)
// by the grace of not being used."
//
// Update: This hack is no longer needed when we don't do a core reset. Guess the null pc was in spu2 memory?
#define NO_BIOS_HACKFIX 1 // set to 1 to disable the hackfix
#define NO_BIOS_HACKFIX 1 // set to 1 to disable the hackfix
void V_Core::PlainDMAWrite(u16 *pMem, u32 size)
{
@ -534,7 +534,7 @@ s32 V_Core::NewDmaWrite(u32 *data, u32 bytesLeft, u32 *bytesProcessed)
s16 *mptr = (s16 *)data;
if (false) //(mode)
if (false) //(mode)
{
//memcpy((ADMATempBuffer+(InputPosWrite<<1)),mptr,0x400);
memcpy(GetMemPtr(0x2000 + (Index << 10) + InputPosWrite), mptr, 0x400);
@ -595,10 +595,10 @@ s32 V_Core::NewDmaWrite(u32 *data, u32 bytesLeft, u32 *bytesProcessed)
if (processed == 0) {
*bytesProcessed = 0;
return 768 * 15; // pause a bit
return 768 * 15; // pause a bit
} else {
*bytesProcessed = processed;
return 0; // auto pause
return 0; // auto pause
}
} else {
if (MsgDMA() && DmaStarting)

26
plugins/spu2-x/src/DplIIdecoder.cpp
View File

@ -45,7 +45,7 @@ static float LMax = 0, RMax = 0;
static float AccL = 0;
static float AccR = 0;
const float Scale = 4294967296.0f; // tweak this value to change the overall output volume
const float Scale = 4294967296.0f; // tweak this value to change the overall output volume
const float GainL = 0.80f * Scale;
const float GainR = 0.80f * Scale;
@ -57,7 +57,7 @@ const float GainSR = 0.90f * Scale;
const float GainLFE = 0.90f * Scale;
const float AddCLR = 0.20f * Scale; // Stereo expansion
const float AddCLR = 0.20f * Scale; // Stereo expansion
extern void ResetDplIIDecoder()
{
@ -76,9 +76,9 @@ void ProcessDplIISample32(const StereoOut32 &src, Stereo51Out32DplII *s)
// Calculate center channel and LFE
float C = (IL + IR) * 0.5f;
float SUB = C; // no need to lowpass, the speaker amplifier should take care of it
float SUB = C; // no need to lowpass, the speaker amplifier should take care of it
float L = IL - C; // Effective L/R data
float L = IL - C; // Effective L/R data
float R = IR - C;
// Peak L/R
@ -89,17 +89,17 @@ void ProcessDplIISample32(const StereoOut32 &src, Stereo51Out32DplII *s)
AccR += (PR - AccR) * 0.1f;
// Calculate power balance
float Balance = (AccR - AccL); // -1 .. 1
float Balance = (AccR - AccL); // -1 .. 1
// If the power levels are different, then the audio is meant for the front speakers
float Frontness = std::abs(Balance);
float Rearness = 1 - Frontness; // And the other way around
float Rearness = 1 - Frontness; // And the other way around
// Equalize the power levels for L/R
float B = std::min(0.9f, std::max(-0.9f, Balance));
float VL = L / (1 - B); // if B>0, it means R>L, so increase L, else decrease L
float VR = R / (1 + B); // vice-versa
float VL = L / (1 - B); // if B>0, it means R>L, so increase L, else decrease L
float VR = R / (1 + B); // vice-versa
// 1.73+1.22 = 2.94; 2.94 = 0.34 = 0.9996; Close enough.
// The range for VL/VR is approximately 0..1,
@ -142,19 +142,19 @@ void ProcessDplSample32(const StereoOut32 &src, Stereo51Out32Dpl *s)
float ValL = src.Left / (float)(1 << (SndOutVolumeShift + 16));
float ValR = src.Right / (float)(1 << (SndOutVolumeShift + 16));
float C = (ValL + ValR) * 0.5f; //+15.8
float C = (ValL + ValR) * 0.5f; //+15.8
float S = (ValL - ValR) * 0.5f;
float L = ValL - C; //+15.8
float L = ValL - C; //+15.8
float R = ValR - C;
float SUB = C;
s32 CX = (s32)(C * AddCLR); // +15.16
s32 CX = (s32)(C * AddCLR); // +15.16
s->Left = (s32)(L * GainL) + CX; // +15.16 = +31, can grow to +32 if (GainL + AddCLR)>255
s->Left = (s32)(L * GainL) + CX; // +15.16 = +31, can grow to +32 if (GainL + AddCLR)>255
s->Right = (s32)(R * GainR) + CX;
s->Center = (s32)(C * GainC); // +15.16 = +31
s->Center = (s32)(C * GainC); // +15.16 = +31
s->LFE = (s32)(SUB * GainLFE);
s->LeftBack = (s32)(S * GainSL);
s->RightBack = (s32)(S * GainSR);

2
plugins/spu2-x/src/Global.h
View File

@ -48,7 +48,7 @@ class SoundTouch;
namespace VersionInfo
{
static const u8 Release = 2;
static const u8 Revision = 0; // increase that with each version
static const u8 Revision = 0; // increase that with each version
}
//////////////////////////////////////////////////////////////////////////

4
plugins/spu2-x/src/Linux/Alsa.cpp
View File

@ -29,9 +29,9 @@
class AlsaMod : public SndOutModule
{
protected:
static const int PacketsPerBuffer = 1; // increase this if ALSA can't keep up with 512-sample packets
static const int PacketsPerBuffer = 1; // increase this if ALSA can't keep up with 512-sample packets
static const int MAX_BUFFER_COUNT = 4;
static const int NumBuffers = 4; // TODO: this should be configurable someday -- lower values reduce latency.
static const int NumBuffers = 4; // TODO: this should be configurable someday -- lower values reduce latency.
unsigned int pspeed;
snd_pcm_t *handle;

2
plugins/spu2-x/src/Linux/Alsa.h
View File

@ -39,4 +39,4 @@ extern void RemoveSound();
extern int SoundGetBytesBuffered();
extern void SoundFeedVoiceData(unsigned char *pSound, long lBytes);
#endif // __LINUX_H__
#endif // __LINUX_H__

12
plugins/spu2-x/src/Linux/Config.cpp
View File

@ -47,9 +47,9 @@ int Interpolation = 4;
*/
bool EffectsDisabled = false;
float FinalVolume; // global
float FinalVolume; // global
bool AdvancedVolumeControl;
float VolumeAdjustFLdb; // decibels settings, cos audiophiles love that
float VolumeAdjustFLdb; // decibels settings, cos audiophiles love that
float VolumeAdjustCdb;
float VolumeAdjustFRdb;
float VolumeAdjustBLdb;
@ -57,7 +57,7 @@ float VolumeAdjustBRdb;
float VolumeAdjustSLdb;
float VolumeAdjustSRdb;
float VolumeAdjustLFEdb;
float VolumeAdjustFL; // linear coefs calcualted from decibels,
float VolumeAdjustFL; // linear coefs calcualted from decibels,
float VolumeAdjustC;
float VolumeAdjustFR;
float VolumeAdjustBL;
@ -69,12 +69,12 @@ unsigned int delayCycles;
bool postprocess_filter_enabled = true;
bool postprocess_filter_dealias = false;
bool _visual_debug_enabled = false; // windows only feature
bool _visual_debug_enabled = false; // windows only feature
// OUTPUT
u32 OutputModule = 0;
int SndOutLatencyMS = 300;
int SynchMode = 0; // Time Stretch, Async or Disabled
int SynchMode = 0; // Time Stretch, Async or Disabled
static u32 OutputAPI = 0;
static u32 SdlOutputAPI = 0;
@ -120,7 +120,7 @@ void ReadSettings()
wxString temp;
CfgReadStr(L"OUTPUT", L"Output_Module", temp, PortaudioOut->GetIdent());
OutputModule = FindOutputModuleById(temp.c_str()); // find the driver index of this module
OutputModule = FindOutputModuleById(temp.c_str()); // find the driver index of this module
// find current API
#ifdef __linux__

2
plugins/spu2-x/src/Linux/Config.h
View File

@ -101,4 +101,4 @@ void AboutBox();
extern wxFileConfig *spuConfig;
extern bool pathSet;
extern void initIni();
#endif // CONFIG_H_INCLUDED
#endif // CONFIG_H_INCLUDED

2
plugins/spu2-x/src/Linux/ConfigDebug.cpp
View File

@ -174,7 +174,7 @@ void DisplayDialog()
// Create the widgets
dialog = gtk_dialog_new_with_buttons(
"Spu2-X Config",
NULL, // parent window
NULL, // parent window
(GtkDialogFlags)(GTK_DIALOG_MODAL | GTK_DIALOG_DESTROY_WITH_PARENT),
"OK", GTK_RESPONSE_ACCEPT,
"Cancel", GTK_RESPONSE_REJECT,

74
plugins/spu2-x/src/Mixer.cpp
View File

@ -152,7 +152,7 @@ static __forceinline s32 GetNextDataBuffered(V_Core &thiscore, uint voiceidx)
if ((vc.SCurrent & 3) == 0) {
IncrementNextA(thiscore, voiceidx);
if ((vc.NextA & 7) == 0) // vc.SCurrent == 24 equivalent
if ((vc.NextA & 7) == 0) // vc.SCurrent == 24 equivalent
{
if (vc.LoopFlags & XAFLAG_LOOP_END) {
thiscore.Regs.ENDX |= (1 << voiceidx);
@ -166,7 +166,7 @@ static __forceinline s32 GetNextDataBuffered(V_Core &thiscore, uint voiceidx)
}
}
} else
vc.NextA++; // no, don't IncrementNextA here. We haven't read the header yet.
vc.NextA++; // no, don't IncrementNextA here. We haven't read the header yet.
}
}
@ -180,7 +180,7 @@ static __forceinline s32 GetNextDataBuffered(V_Core &thiscore, uint voiceidx)
SetIrqCall(i);
s16 *memptr = GetMemPtr(vc.NextA & 0xFFFF8);
vc.LoopFlags = *memptr >> 8; // grab loop flags from the upper byte.
vc.LoopFlags = *memptr >> 8; // grab loop flags from the upper byte.
if ((vc.LoopFlags & XAFLAG_LOOP_START) && !vc.LoopMode)
vc.LoopStartA = vc.NextA & 0xFFFF8;
@ -225,13 +225,13 @@ static __forceinline void GetNextDataDummy(V_Core &thiscore, uint voiceidx)
IncrementNextA(thiscore, voiceidx);
if ((vc.NextA & 7) == 0) // vc.SCurrent == 24 equivalent
if ((vc.NextA & 7) == 0) // vc.SCurrent == 24 equivalent
{
if (vc.LoopFlags & XAFLAG_LOOP_END) {
thiscore.Regs.ENDX |= (1 << voiceidx);
vc.NextA = vc.LoopStartA | 1;
} else
vc.NextA++; // no, don't IncrementNextA here. We haven't read the header yet.
vc.NextA++; // no, don't IncrementNextA here. We haven't read the header yet.
}
if (vc.SCurrent == 28) {
@ -239,7 +239,7 @@ static __forceinline void GetNextDataDummy(V_Core &thiscore, uint voiceidx)
if (Cores[i].IRQEnable && Cores[i].IRQA == (vc.NextA & 0xFFFF8))
SetIrqCall(i);
vc.LoopFlags = *GetMemPtr(vc.NextA & 0xFFFF8) >> 8; // grab loop flags from the upper byte.
vc.LoopFlags = *GetMemPtr(vc.NextA & 0xFFFF8) >> 8; // grab loop flags from the upper byte.
if ((vc.LoopFlags & XAFLAG_LOOP_START) && !vc.LoopMode)
vc.LoopStartA = vc.NextA & 0xFFFF8;
@ -335,7 +335,7 @@ static __forceinline void CalculateADSR(V_Core &thiscore, uint voiceidx)
vc.Stop();
}
pxAssume(vc.ADSR.Value >= 0); // ADSR should never be negative...
pxAssume(vc.ADSR.Value >= 0); // ADSR should never be negative...
}
/*
@ -343,34 +343,34 @@ static __forceinline void CalculateADSR(V_Core &thiscore, uint voiceidx)
*/
template <s32 i_tension>
__forceinline static s32 HermiteInterpolate(
s32 y0, // 16.0
s32 y1, // 16.0
s32 y2, // 16.0
s32 y3, // 16.0
s32 mu // 0.12
s32 y0, // 16.0
s32 y1, // 16.0
s32 y2, // 16.0
s32 y3, // 16.0
s32 mu // 0.12
)
{
s32 m00 = ((y1 - y0) * i_tension) >> 16; // 16.0
s32 m01 = ((y2 - y1) * i_tension) >> 16; // 16.0
s32 m00 = ((y1 - y0) * i_tension) >> 16; // 16.0
s32 m01 = ((y2 - y1) * i_tension) >> 16; // 16.0
s32 m0 = m00 + m01;
s32 m10 = ((y2 - y1) * i_tension) >> 16; // 16.0
s32 m11 = ((y3 - y2) * i_tension) >> 16; // 16.0
s32 m10 = ((y2 - y1) * i_tension) >> 16; // 16.0
s32 m11 = ((y3 - y2) * i_tension) >> 16; // 16.0
s32 m1 = m10 + m11;
s32 val = ((2 * y1 + m0 + m1 - 2 * y2) * mu) >> 12; // 16.0
val = ((val - 3 * y1 - 2 * m0 - m1 + 3 * y2) * mu) >> 12; // 16.0
val = ((val + m0) * mu) >> 11; // 16.0
s32 val = ((2 * y1 + m0 + m1 - 2 * y2) * mu) >> 12; // 16.0
val = ((val - 3 * y1 - 2 * m0 - m1 + 3 * y2) * mu) >> 12; // 16.0
val = ((val + m0) * mu) >> 11; // 16.0
return (val + (y1 << 1));
}
__forceinline static s32 CatmullRomInterpolate(
s32 y0, // 16.0
s32 y1, // 16.0
s32 y2, // 16.0
s32 y3, // 16.0
s32 mu // 0.12
s32 y0, // 16.0
s32 y1, // 16.0
s32 y2, // 16.0
s32 y3, // 16.0
s32 mu // 0.12
)
{
//q(t) = 0.5 *( (2 * P1) +
@ -391,11 +391,11 @@ __forceinline static s32 CatmullRomInterpolate(
}
__forceinline static s32 CubicInterpolate(
s32 y0, // 16.0
s32 y1, // 16.0
s32 y2, // 16.0
s32 y3, // 16.0
s32 mu // 0.12
s32 y0, // 16.0
s32 y1, // 16.0
s32 y2, // 16.0
s32 y3, // 16.0
s32 mu // 0.12
)
{
const s32 a0 = y3 - y2 - y0 + y1;
@ -445,7 +445,7 @@ static __forceinline s32 GetVoiceValues(V_Core &thiscore, uint voiceidx)
jNO_DEFAULT;
}
return 0; // technically unreachable!
return 0; // technically unreachable!
}
// Noise values need to be mixed without going through interpolation, since it
@ -578,14 +578,14 @@ static __forceinline StereoOut32 MixVoice(uint coreidx, uint voiceidx)
return ApplyVolume(StereoOut32(Value, Value), vc.Volume);
} else {
// Continue processing voice, even if it's "off". Or else we miss interrupts! (Fatal Frame engine died because of this.)
if (NEVER_SKIP_VOICES || (*GetMemPtr(vc.NextA & 0xFFFF8) >> 8 & 3) != 3 || vc.LoopStartA != (vc.NextA & ~7) // not in a tight loop
|| (Cores[0].IRQEnable && (Cores[0].IRQA & ~7) == vc.LoopStartA) // or should be interrupting regularly
|| (Cores[1].IRQEnable && (Cores[1].IRQA & ~7) == vc.LoopStartA) || !(thiscore.Regs.ENDX & 1 << voiceidx)) // or isn't currently flagged as having passed the endpoint
if (NEVER_SKIP_VOICES || (*GetMemPtr(vc.NextA & 0xFFFF8) >> 8 & 3) != 3 || vc.LoopStartA != (vc.NextA & ~7) // not in a tight loop
|| (Cores[0].IRQEnable && (Cores[0].IRQA & ~7) == vc.LoopStartA) // or should be interrupting regularly
|| (Cores[1].IRQEnable && (Cores[1].IRQA & ~7) == vc.LoopStartA) || !(thiscore.Regs.ENDX & 1 << voiceidx)) // or isn't currently flagged as having passed the endpoint
{
UpdatePitch(coreidx, voiceidx);
while (vc.SP > 0)
GetNextDataDummy(thiscore, voiceidx); // Dummy is enough
GetNextDataDummy(thiscore, voiceidx); // Dummy is enough
}
// Write-back of raw voice data (some zeros since the voice is "dead")
@ -598,7 +598,7 @@ static __forceinline StereoOut32 MixVoice(uint coreidx, uint voiceidx)
}
}
const VoiceMixSet VoiceMixSet::Empty((StereoOut32()), (StereoOut32())); // Don't use SteroOut32::Empty because C++ doesn't make any dep/order checks on global initializers.
const VoiceMixSet VoiceMixSet::Empty((StereoOut32()), (StereoOut32())); // Don't use SteroOut32::Empty because C++ doesn't make any dep/order checks on global initializers.
static __forceinline void MixCoreVoices(VoiceMixSet &dest, const uint coreidx)
{
@ -671,7 +671,7 @@ StereoOut32 V_Core::Mix(const VoiceMixSet &inVoices, const StereoOut32 &Input, c
//
// On the other hand, updating the buffer is cheap and easy, so might as well. ;)
Reverb_AdvanceBuffer(); // Updates the reverb work area as well, if needed.
Reverb_AdvanceBuffer(); // Updates the reverb work area as well, if needed.
// ToDo:
// Bad EndA causes memory corruption. Bad for us, unknown on PS2!
@ -806,7 +806,7 @@ __forceinline
WaveDump::WriteCore(1, CoreSrc_Input, InputData[1]);
// Todo: Replace me with memzero initializer!
VoiceMixSet VoiceData[2] = {VoiceMixSet::Empty, VoiceMixSet::Empty}; // mixed voice data for each core.
VoiceMixSet VoiceData[2] = {VoiceMixSet::Empty, VoiceMixSet::Empty}; // mixed voice data for each core.
MixCoreVoices(VoiceData[0], 0);
MixCoreVoices(VoiceData[1], 1);

2
plugins/spu2-x/src/Mixer.h
View File

@ -121,7 +121,7 @@ struct FrequencyResponseFilter
, lb2(0.97555529586426892000f)
, ha0(1.52690772687271160000f)
, ha1(-1.62653918974914990000f) //-1.72 = "common equilizer curve" --____--
, ha1(-1.62653918974914990000f) //-1.72 = "common equilizer curve" --____--
, ha2(0.57997976029249387000f)
, hb1(-0.80955590379048203000f)
, hb2(0.28990420120653748000f)

12
plugins/spu2-x/src/PS2E-spu2.cpp
View File

@ -75,7 +75,7 @@ static void InitLibraryName()
#ifdef DEBUG_FAST
"-Debug"
#elif defined(PCSX2_DEBUG)
"-Debug/Strict" // strict debugging is slow!
"-Debug/Strict" // strict debugging is slow!
#elif defined(PCSX2_DEVBUILD)
"-Dev"
#else
@ -92,7 +92,7 @@ static void InitLibraryName()
#ifdef DEBUG_FAST
"-Debug"
#elif defined(PCSX2_DEBUG)
"-Debug/Strict" // strict debugging is slow!
"-Debug/Strict" // strict debugging is slow!
#elif defined(PCSX2_DEVBUILD)
"-Dev"
#else
@ -268,7 +268,7 @@ SPU2irqCallback(void (*SPU2callback)(), void (*DMA4callback)(), void (*DMA7callb
#endif
EXPORT_C_(void)
CALLBACK SPU2readDMA4Mem(u16 *pMem, u32 size) // size now in 16bit units
CALLBACK SPU2readDMA4Mem(u16 *pMem, u32 size) // size now in 16bit units
{
if (cyclePtr != NULL)
TimeUpdate(*cyclePtr);
@ -278,7 +278,7 @@ CALLBACK SPU2readDMA4Mem(u16 *pMem, u32 size) // size now in 16bit units
}
EXPORT_C_(void)
CALLBACK SPU2writeDMA4Mem(u16 *pMem, u32 size) // size now in 16bit units
CALLBACK SPU2writeDMA4Mem(u16 *pMem, u32 size) // size now in 16bit units
{
if (cyclePtr != NULL)
TimeUpdate(*cyclePtr);
@ -336,7 +336,7 @@ SPU2reset()
{
memset(spu2regs, 0, 0x010000);
memset(_spu2mem, 0, 0x200000);
memset(_spu2mem + 0x2800, 7, 0x10); // from BIOS reversal. Locks the voices so they don't run free.
memset(_spu2mem + 0x2800, 7, 0x10); // from BIOS reversal. Locks the voices so they don't run free.
Cores[0].Init(0);
Cores[1].Init(1);
}
@ -456,7 +456,7 @@ SPU2open(void *pDsp)
gsWindowHandle = 0;
#ifdef _MSC_VER
#ifdef PCSX2_DEVBUILD // Define may not be needed but not tested yet. Better make sure.
#ifdef PCSX2_DEVBUILD // Define may not be needed but not tested yet. Better make sure.
if (IsDevBuild && VisualDebug()) {
if (debugDialogOpen == 0) {
hDebugDialog = CreateDialogParam(hInstance, MAKEINTRESOURCE(IDD_DEBUG), 0, DebugProc, 0);

2
plugins/spu2-x/src/ReadInput.cpp
View File

@ -18,7 +18,7 @@
#include "Global.h"
#include "Dma.h"
#include "PS2E-spu2.h" // required for ENABLE_NEW_IOPDMA_SPU2 define
#include "PS2E-spu2.h" // required for ENABLE_NEW_IOPDMA_SPU2 define
// Core 0 Input is "SPDIF mode" - Source audio is AC3 compressed.

6
plugins/spu2-x/src/RegLog.cpp
View File

@ -36,20 +36,20 @@ void SPU2writeLog(const char *action, u32 rmem, u16 value)
//u32 vx=0, vc=0;
u32 core = 0, omem, mem;
omem = mem = rmem & 0x7FF; //FFFF;
omem = mem = rmem & 0x7FF; //FFFF;
if (mem & 0x400) {
omem ^= 0x400;
core = 1;
}
if (omem < 0x0180) // Voice Params (VP)
if (omem < 0x0180) // Voice Params (VP)
{
const u32 voice = (omem & 0x1F0) >> 4;
const u32 param = (omem & 0xF) >> 1;
char dest[192];
sprintf(dest, "Voice %d %s", voice, ParamNames[param]);
RegLog(2, dest, rmem, core, value);
} else if ((omem >= 0x01C0) && (omem < 0x02E0)) // Voice Addressing Params (VA)
} else if ((omem >= 0x01C0) && (omem < 0x02E0)) // Voice Addressing Params (VA)
{
const u32 voice = ((omem - 0x01C0) / 12);
const u32 address = ((omem - 0x01C0) % 12) >> 1;

4
plugins/spu2-x/src/RegTable.cpp
View File

@ -88,7 +88,7 @@ u16 const *const regtable_original[0x401] =
PCORE(0, AutoDMACtrl),
PRAW(0x1b2), PRAW(0x1b4), PRAW(0x1b6), PRAW(0x1b8), PRAW(0x1ba), PRAW(0x1bc), PRAW(0x1be), // unknown
PRAW(0x1b2), PRAW(0x1b4), PRAW(0x1b6), PRAW(0x1b8), PRAW(0x1ba), PRAW(0x1bc), PRAW(0x1be), // unknown
// Voice Addresses
PVCA(0, 0), PVCA(0, 1), PVCA(0, 2), PVCA(0, 3), PVCA(0, 4), PVCA(0, 5),
@ -191,7 +191,7 @@ u16 const *const regtable_original[0x401] =
PCORE(1, AutoDMACtrl),
PRAW(0x5b2), PRAW(0x5b4), PRAW(0x5b6), PRAW(0x5b8), PRAW(0x5ba), PRAW(0x5bc), PRAW(0x5be), // unknown
PRAW(0x5b2), PRAW(0x5b4), PRAW(0x5b6), PRAW(0x5b8), PRAW(0x5ba), PRAW(0x5bc), PRAW(0x5be), // unknown
// Voice Addresses
PVCA(1, 0), PVCA(1, 1), PVCA(1, 2), PVCA(1, 3), PVCA(1, 4), PVCA(1, 5),

4
plugins/spu2-x/src/Reverb.cpp
View File

@ -230,8 +230,8 @@ StereoOut32 V_Core::DoReverb(const StereoOut32 &Input)
_spu2mem[mix_dest_b1] = mix_b1;
upbuf[ubpos] = clamp_mix(StereoOut32(
mix_a0 + mix_b0, // left
mix_a1 + mix_b1 // right
mix_a0 + mix_b0, // left
mix_a1 + mix_b1 // right
));
}

26
plugins/spu2-x/src/SndOut.cpp
View File

@ -95,7 +95,7 @@ SndOutModule *mods[] =
#if defined(__linux__) /* && defined(__ALSA__)*/
AlsaOut,
#endif
NULL // signals the end of our list
NULL // signals the end of our list
};
int FindOutputModuleById(const wchar_t *omodid)
@ -132,7 +132,7 @@ bool SndBuffer::CheckUnderrunStatus(int &nSamples, int &quietSampleCount)
int data = _GetApproximateDataInBuffer();
if (m_underrun_freeze) {
int toFill = m_size / ((SynchMode == 2) ? 32 : 400); // TimeStretch and Async off?
int toFill = m_size / ((SynchMode == 2) ? 32 : 400); // TimeStretch and Async off?
toFill = GetAlignedBufferSize(toFill);
// toFill is now aligned to a SndOutPacket
@ -145,13 +145,13 @@ bool SndBuffer::CheckUnderrunStatus(int &nSamples, int &quietSampleCount)
m_underrun_freeze = false;
if (MsgOverruns())
ConLog(" * SPU2 > Underrun compensation (%d packets buffered)\n", toFill / SndOutPacketSize);
lastPct = 0.0; // normalize timestretcher
lastPct = 0.0; // normalize timestretcher
} else if (data < nSamples) {
nSamples = data;
quietSampleCount = SndOutPacketSize - data;
m_underrun_freeze = true;
if (SynchMode == 0) // TimeStrech on
if (SynchMode == 0) // TimeStrech on
timeStretchUnderrun();
return nSamples != 0;
@ -321,7 +321,7 @@ void SndBuffer::_WriteSamples(StereoOut32 *bData, int nSamples)
// The older portion of the buffer is discarded rather than incoming data,
// so that the overall audio synchronization is better.
int free = m_size - _GetApproximateDataInBuffer(); // -1, but the <= handles that
int free = m_size - _GetApproximateDataInBuffer(); // -1, but the <= handles that
if (free <= nSamples) {
// Disabled since the lock-free queue can't handle changing the read end from the write thread
#if 0
@ -350,7 +350,7 @@ void SndBuffer::_WriteSamples(StereoOut32 *bData, int nSamples)
#else
if (MsgOverruns())
ConLog(" * SPU2 > Overrun! 1 packet tossed)\n");
lastPct = 0.0; // normalize the timestretcher
lastPct = 0.0; // normalize the timestretcher
return;
#endif
}
@ -379,7 +379,7 @@ void SndBuffer::Init()
m_underrun_freeze = false;
sndTempBuffer = new StereoOut32[SndOutPacketSize];
sndTempBuffer16 = new StereoOut16[SndOutPacketSize * 2]; // in case of leftovers.
sndTempBuffer16 = new StereoOut16[SndOutPacketSize * 2]; // in case of leftovers.
} catch (std::bad_alloc &) {
// out of memory exception (most likely)
@ -395,7 +395,7 @@ void SndBuffer::Init()
sndTempProgress = 0;
soundtouchInit(); // initializes the timestretching
soundtouchInit(); // initializes the timestretching
// initialize module
if (mods[OutputModule]->Init() == -1)
@ -421,7 +421,7 @@ int SndBuffer::ssFreeze = 0;
void SndBuffer::ClearContents()
{
SndBuffer::soundtouchClearContents();
SndBuffer::ssFreeze = 256; //Delays sound output for about 1 second.
SndBuffer::ssFreeze = 256; //Delays sound output for about 1 second.
}
void SndBuffer::Write(const StereoOut32 &Sample)
@ -432,7 +432,7 @@ void SndBuffer::Write(const StereoOut32 &Sample)
if (WavRecordEnabled)
RecordWrite(Sample.DownSample());
if (mods[OutputModule] == &NullOut) // null output doesn't need buffering or stretching! :p
if (mods[OutputModule] == &NullOut) // null output doesn't need buffering or stretching! :p
return;
sndTempBuffer[sndTempProgress++] = Sample;
@ -445,7 +445,7 @@ void SndBuffer::Write(const StereoOut32 &Sample)
//Don't play anything directly after loading a savestate, avoids static killing your speakers.
if (ssFreeze > 0) {
ssFreeze--;
memset(sndTempBuffer, 0, sizeof(StereoOut32) * SndOutPacketSize); // Play silence
memset(sndTempBuffer, 0, sizeof(StereoOut32) * SndOutPacketSize); // Play silence
}
#ifndef __POSIX__
if (dspPluginEnabled) {
@ -464,7 +464,7 @@ void SndBuffer::Write(const StereoOut32 &Sample)
sndTempBuffer[i] = sndTempBuffer16[ei].UpSample();
}
if (SynchMode == 0) // TimeStrech on
if (SynchMode == 0) // TimeStrech on
timeStretchWrite();
else
_WriteSamples(sndTempBuffer, SndOutPacketSize);
@ -480,7 +480,7 @@ void SndBuffer::Write(const StereoOut32 &Sample)
}
#endif
else {
if (SynchMode == 0) // TimeStrech on
if (SynchMode == 0) // TimeStrech on
timeStretchWrite();
else
_WriteSamples(sndTempBuffer, SndOutPacketSize);

6
plugins/spu2-x/src/SndOut.h
View File

@ -27,7 +27,7 @@ static const int SndOutPacketSize = 64;
// downsamples 32 bit samples to 16 bit sound driver output (this way timestretching and
// DSP effects get better precision results)
static const int SndOutVolumeShift = 12;
static const int SndOutVolumeShift32 = 16 - SndOutVolumeShift; // shift up, not down
static const int SndOutVolumeShift32 = 16 - SndOutVolumeShift; // shift up, not down
// Samplerate of the SPU2. For accurate playback we need to match this
// exactly. Trying to scale samplerates and maintain SPU2's Ts timing accuracy
@ -50,7 +50,7 @@ extern unsigned int delayCycles;
struct Stereo51Out16DplII;
struct Stereo51Out32DplII;
struct Stereo51Out16Dpl; // similar to DplII but without rear balancing
struct Stereo51Out16Dpl; // similar to DplII but without rear balancing
struct Stereo51Out32Dpl;
extern void ResetDplIIDecoder();
@ -694,4 +694,4 @@ extern void RecordWrite(const StereoOut16 &sample);
extern s32 DspLoadLibrary(wchar_t *fileName, int modNum);
extern void DspCloseLibrary();
extern int DspProcess(s16 *buffer, int samples);
extern void DspUpdate(); // to let the Dsp process window messages
extern void DspUpdate(); // to let the Dsp process window messages

24
plugins/spu2-x/src/SndOut_Portaudio.cpp
View File

@ -178,20 +178,20 @@ public:
const PaDeviceInfo *devinfo = Pa_GetDeviceInfo(deviceIndex);
int speakers;
switch (numSpeakers) // speakers = (numSpeakers + 1) *2; ?
switch (numSpeakers) // speakers = (numSpeakers + 1) *2; ?
{
case 0:
speakers = 2;
break; // Stereo
break; // Stereo
case 1:
speakers = 4;
break; // Quadrafonic
break; // Quadrafonic
case 2:
speakers = 6;
break; // Surround 5.1
break; // Surround 5.1
case 3:
speakers = 8;
break; // Surround 7.1
break; // Surround 7.1
default:
speakers = 2;
}
@ -223,24 +223,24 @@ public:
switch (dplLevel) {
case 0:
ConLog("* SPU2 > 5.1 speaker expansion enabled.\n");
ActualPaCallback = new ConvertedSampleReader<Stereo51Out32>(&writtenSoFar); //"normal" stereo upmix
ActualPaCallback = new ConvertedSampleReader<Stereo51Out32>(&writtenSoFar); //"normal" stereo upmix
break;
case 1:
ConLog("* SPU2 > 5.1 speaker expansion with basic ProLogic dematrixing enabled.\n");
ActualPaCallback = new ConvertedSampleReader<Stereo51Out32Dpl>(&writtenSoFar); // basic Dpl decoder without rear stereo balancing
ActualPaCallback = new ConvertedSampleReader<Stereo51Out32Dpl>(&writtenSoFar); // basic Dpl decoder without rear stereo balancing
break;
case 2:
ConLog("* SPU2 > 5.1 speaker expansion with experimental ProLogicII dematrixing enabled.\n");
ActualPaCallback = new ConvertedSampleReader<Stereo51Out32DplII>(&writtenSoFar); //gigas PLII
ActualPaCallback = new ConvertedSampleReader<Stereo51Out32DplII>(&writtenSoFar); //gigas PLII
break;
}
actualUsedChannels = 6; // we do not support 7.0 or 6.2 configurations, downgrade to 5.1
actualUsedChannels = 6; // we do not support 7.0 or 6.2 configurations, downgrade to 5.1
break;
default: // anything 8 or more gets the 7.1 treatment!
default: // anything 8 or more gets the 7.1 treatment!
ConLog("* SPU2 > 7.1 speaker expansion enabled.\n");
ActualPaCallback = new ConvertedSampleReader<Stereo71Out32>(&writtenSoFar);
actualUsedChannels = 8; // we do not support 7.2 or more, downgrade to 7.1
actualUsedChannels = 8; // we do not support 7.2 or more, downgrade to 7.1
break;
}
@ -497,7 +497,7 @@ private:
public:
virtual void Configure(uptr parent)
{
PaError err = Pa_Initialize(); // Initialization can be done multiple times, PA keeps a counter
PaError err = Pa_Initialize(); // Initialization can be done multiple times, PA keeps a counter
if (err != paNoError) {
fprintf(stderr, "* SPU2-X: PortAudio error: %s\n", Pa_GetErrorText(err));
return;

8
plugins/spu2-x/src/Spu2replay.cpp
View File

@ -183,7 +183,7 @@ u64 HighResCounter()
return time;
}
void InitWaitSync() // not extremely accurate but enough.
void InitWaitSync() // not extremely accurate but enough.
{
HighResFreq = HighResFrequency();
HighResPrev = HighResCounter();
@ -202,11 +202,11 @@ u32 WaitSync(u32 TargetCycle)
// Refresh current time after sleeping
u64 Current = HighResCounter();
u32 delta = (u32)floor((Current - HighResPrev) / HighResScale + 0.5); // We lose some precision here, cycles might drift away over long periods of time ;P
u32 delta = (u32)floor((Current - HighResPrev) / HighResScale + 0.5); // We lose some precision here, cycles might drift away over long periods of time ;P
// Calculate time delta
CurrentIOPCycle += delta;
HighResPrev += (u64)floor(delta * HighResScale + 0.5); // Trying to compensate drifting mentioned above, not necessarily useful.
HighResPrev += (u64)floor(delta * HighResScale + 0.5); // Trying to compensate drifting mentioned above, not necessarily useful.
return delta;
}
@ -264,7 +264,7 @@ s2r_replay(HWND hwnd, HINSTANCE hinst, LPSTR filename, int nCmdShow)
replay_mode = true;
InitWaitSync(); // Initialize the WaitSync stuff
InitWaitSync(); // Initialize the WaitSync stuff
SPU2init();
SPU2irqCallback(dummy1, dummy4, dummy7);

28
plugins/spu2-x/src/Timestretcher.cpp
View File

@ -51,7 +51,7 @@ float SndBuffer::GetStatusPct()
// Get the buffer status of the output driver too, so that we can
// obtain a more accurate overall buffer status.
int drvempty = mods[OutputModule]->GetEmptySampleCount(); // / 2;
int drvempty = mods[OutputModule]->GetEmptySampleCount(); // / 2;
//ConLog( "Data %d >>> driver: %d predict: %d\n", m_data, drvempty, m_predictData );
@ -112,7 +112,7 @@ float addToAvg(float val)
{
static float avg_fullness[AVERAGING_BUFFER_SIZE];
static unsigned int nextAvgPos = 0;
static unsigned int available = 0; // Make sure we're not averaging AVERAGING_WINDOW items if we inserted less.
static unsigned int available = 0; // Make sure we're not averaging AVERAGING_WINDOW items if we inserted less.
if (gRequestStretcherReset >= STRETCHER_RESET_THRESHOLD)
available = 0;
@ -137,7 +137,7 @@ float addToAvg(float val)
}
sum = sum / actualWindow;
return sum ? sum : 1; // 1 because that's the 100% perfect speed value
return sum ? sum : 1; // 1 because that's the 100% perfect speed value
}
template <class T>
@ -150,14 +150,14 @@ bool IsInRange(const T &val, const T &min, const T &max)
void SndBuffer::UpdateTempoChangeSoundTouch2()
{
long targetSamplesReservoir = 48 * SndOutLatencyMS; //48000*SndOutLatencyMS/1000
long targetSamplesReservoir = 48 * SndOutLatencyMS; //48000*SndOutLatencyMS/1000
//base aim at buffer filled %
float baseTargetFullness = (double)targetSamplesReservoir; ///(double)m_size;//0.05;
float baseTargetFullness = (double)targetSamplesReservoir; ///(double)m_size;//0.05;
//state vars
static bool inside_hysteresis; //=false;
static int hys_ok_count; //=0;
static float dynamicTargetFullness; //=baseTargetFullness;
static bool inside_hysteresis; //=false;
static int hys_ok_count; //=0;
static float dynamicTargetFullness; //=baseTargetFullness;
if (gRequestStretcherReset >= STRETCHER_RESET_THRESHOLD) {
ConLog("______> stretch: Reset.\n");
inside_hysteresis = false;
@ -166,10 +166,10 @@ void SndBuffer::UpdateTempoChangeSoundTouch2()
}
int data = _GetApproximateDataInBuffer();
float bufferFullness = (float)data; ///(float)m_size;
float bufferFullness = (float)data; ///(float)m_size;
#ifdef NEWSTRETCHER_USE_DYNAMIC_TUNING
{ //test current iterations/sec every 0.5s, and change algo params accordingly if different than previous IPS more than 30%
{ //test current iterations/sec every 0.5s, and change algo params accordingly if different than previous IPS more than 30%
static long iters = 0;
static wxDateTime last = wxDateTime::UNow();
wxDateTime unow = wxDateTime::UNow();
@ -192,7 +192,7 @@ void SndBuffer::UpdateTempoChangeSoundTouch2()
//Algorithm params: (threshold params (hysteresis), etc)
const float hys_ok_factor = 1.04f;
const float hys_bad_factor = 1.2f;
int hys_min_ok_count = GetClamped((int)(50.0 * (float)targetIPS / 750.0), 2, 100); //consecutive iterations within hys_ok before going to 1:1 mode
int hys_min_ok_count = GetClamped((int)(50.0 * (float)targetIPS / 750.0), 2, 100); //consecutive iterations within hys_ok before going to 1:1 mode
int compensationDivider = GetClamped((int)(100.0 * (float)targetIPS / 750), 15, 150);
float tempoAdjust = bufferFullness / dynamicTargetFullness;
@ -208,7 +208,7 @@ void SndBuffer::UpdateTempoChangeSoundTouch2()
tempoAdjust = GetClamped(tempoAdjust, 0.05f, 10.0f);
if (tempoAdjust < 1)
baseTargetFullness /= sqrt(tempoAdjust); // slightly increase latency when running slow.
baseTargetFullness /= sqrt(tempoAdjust); // slightly increase latency when running slow.
dynamicTargetFullness += (baseTargetFullness / tempoAdjust - dynamicTargetFullness) / (double)compensationDivider;
if (IsInRange(tempoAdjust, 0.9f, 1.1f) && IsInRange(dynamicTargetFullness, baseTargetFullness * 0.9f, baseTargetFullness * 1.1f))
@ -242,7 +242,7 @@ void SndBuffer::UpdateTempoChangeSoundTouch2()
wxDateTime unow = wxDateTime::UNow();
wxTimeSpan delta = unow.Subtract(last);
if (delta.GetMilliseconds() > 1000) { //report buffers state and tempo adjust every second
if (delta.GetMilliseconds() > 1000) { //report buffers state and tempo adjust every second
ConLog("buffers: %4d ms (%3.0f%%), tempo: %f, comp: %2.3f, iters: %d, (N-IPS:%d -> avg:%d, minokc:%d, div:%d) reset:%d\n",
(int)(data / 48), (double)(100.0 * bufferFullness / baseTargetFullness), (double)tempoAdjust, (double)(dynamicTargetFullness / baseTargetFullness), iters, (int)targetIPS, AVERAGING_WINDOW, hys_min_ok_count, compensationDivider, gRequestStretcherReset);
last = unow;
@ -266,7 +266,7 @@ void SndBuffer::UpdateTempoChangeSoundTouch()
float tempoChange;
float emergencyAdj = 0;
float newcee = cTempo; // workspace var. for cTempo
float newcee = cTempo; // workspace var. for cTempo
// IMPORTANT!
// If you plan to tweak these values, make sure you're using a release build

2
plugins/spu2-x/src/WavFile.cpp
View File

@ -137,7 +137,7 @@ void WavOutFile::write(const short *buffer, int numElems)
assert(header.format.bits_per_sample == 16);
if (numElems < 1)
return; // nothing to do
return; // nothing to do
res = fwrite(buffer, 2, numElems, fptr);

12
plugins/spu2-x/src/WavFile.h
View File

@ -93,10 +93,10 @@ private:
public:
/// Constructor: Creates a new WAV file. Throws a 'runtime_error' exception
/// if file creation fails.
WavOutFile(const char *fileName, ///< Filename
int sampleRate, ///< Sample rate (e.g. 44100 etc)
int bits, ///< Bits per sample (8 or 16 bits)
int channels ///< Number of channels (1=mono, 2=stereo)
WavOutFile(const char *fileName, ///< Filename
int sampleRate, ///< Sample rate (e.g. 44100 etc)
int bits, ///< Bits per sample (8 or 16 bits)
int channels ///< Number of channels (1=mono, 2=stereo)
);
/// Destructor: Finalizes & closes the WAV file.
@ -104,8 +104,8 @@ public:
/// Write data to WAV file. Throws a 'runtime_error' exception if writing to
/// file fails.
void write(const short *buffer, ///< Pointer to sample data buffer.
int numElems ///< How many array items are to be written to file.
void write(const short *buffer, ///< Pointer to sample data buffer.
int numElems ///< How many array items are to be written to file.
);
};

2
plugins/spu2-x/src/Wavedump_wav.cpp
View File

@ -114,7 +114,7 @@ void RecordStart()
m_wavrecord = new WavOutFile("recording.wav", 48000, 16, 2);
WavRecordEnabled = true;
} catch (std::runtime_error &) {
m_wavrecord = NULL; // not needed, but what the heck. :)
m_wavrecord = NULL; // not needed, but what the heck. :)
SysMessage("SPU2-X couldn't open file for recording: %s.\nRecording to wavfile disabled.", "recording.wav");
}
}

10
plugins/spu2-x/src/Windows/Config.cpp
View File

@ -40,9 +40,9 @@ int Interpolation = 4;
bool EffectsDisabled = false;
float FinalVolume; // Global
float FinalVolume; // Global
bool AdvancedVolumeControl;
float VolumeAdjustFLdb; // decibels settings, cos audiophiles love that
float VolumeAdjustFLdb; // decibels settings, cos audiophiles love that
float VolumeAdjustCdb;
float VolumeAdjustFRdb;
float VolumeAdjustBLdb;
@ -50,7 +50,7 @@ float VolumeAdjustBRdb;
float VolumeAdjustSLdb;
float VolumeAdjustSRdb;
float VolumeAdjustLFEdb;
float VolumeAdjustFL; // linear coefs calcualted from decibels,
float VolumeAdjustFL; // linear coefs calcualted from decibels,
float VolumeAdjustC;
float VolumeAdjustFR;
float VolumeAdjustBL;
@ -65,7 +65,7 @@ bool postprocess_filter_dealias = false;
// OUTPUT
int SndOutLatencyMS = 100;
int SynchMode = 0; // Time Stretch, Async or Disabled
int SynchMode = 0; // Time Stretch, Async or Disabled
u32 OutputModule = 0;
@ -117,7 +117,7 @@ void ReadSettings()
dplLevel = CfgReadInt(L"OUTPUT", L"DplDecodingLevel", 0);
SndOutLatencyMS = CfgReadInt(L"OUTPUT", L"Latency", 100);
if ((SynchMode == 0) && (SndOutLatencyMS < LATENCY_MIN_TS)) // can't use low-latency with timestretcher atm
if ((SynchMode == 0) && (SndOutLatencyMS < LATENCY_MIN_TS)) // can't use low-latency with timestretcher atm
SndOutLatencyMS = LATENCY_MIN_TS;
else if (SndOutLatencyMS < LATENCY_MIN)
SndOutLatencyMS = LATENCY_MIN;

18
plugins/spu2-x/src/Windows/RealtimeDebugger.cpp
View File

@ -54,7 +54,7 @@ void UpdateDebugDialog()
return;
lCount++;
if (lCount >= (SampleRate / 100)) // Increase to SampleRate/200 for smooth display.
if (lCount >= (SampleRate / 100)) // Increase to SampleRate/200 for smooth display.
{
HDC hdc = GetDC(hDebugDialog);
@ -82,12 +82,12 @@ void UpdateDebugDialog()
SetDCBrushColor(hdc, RGB(0, 0, 0));
if ((vc.ADSR.Phase > 0) && (vc.ADSR.Phase < 6)) {
SetDCBrushColor(hdc, RGB(0, 0, 128)); // light blue for playing voice
if (vc.Modulated) {
SetDCBrushColor(hdc, RGB(0, 128, 0)); // light green for playing voice with modulation enabled
}
if (vc.Noise) {
SetDCBrushColor(hdc, RGB(128, 0, 0)); // light red for playing voice with noise enabled
}
if (vc.Modulated) {
SetDCBrushColor(hdc, RGB(0, 128, 0)); // light green for playing voice with modulation enabled
}
if (vc.Noise) {
SetDCBrushColor(hdc, RGB(128, 0, 0)); // light red for playing voice with noise enabled
}
}
/*
else
@ -122,7 +122,7 @@ void UpdateDebugDialog()
int peak = (vcd.displayPeak * 38) / 32768;
if (vcd.displayPeak >= 32700) // leave a little bit of margin
if (vcd.displayPeak >= 32700) // leave a little bit of margin
{
SetDCBrushColor(hdc, RGB(255, 0, 0));
}
@ -241,7 +241,7 @@ void UpdateDebugDialog()
}
}
}
if (cd.dmaFlag > 0) // So it shows x times this is called, since dmas are so fast
if (cd.dmaFlag > 0) // So it shows x times this is called, since dmas are so fast
{
swprintf_s(t, L"size = %d", cd.lastsize);

6
plugins/spu2-x/src/Windows/SndOut_DSound.cpp
View File

@ -40,14 +40,14 @@ private:
ds_device_data m_devices[32];
int ndevs;
GUID DevGuid; // currently employed GUID.
GUID DevGuid; // currently employed GUID.
bool haveGuid;
//////////////////////////////////////////////////////////////////////////////////////////
// Instance vars
int channel;
int myLastWrite; // last write position, in bytes
int myLastWrite; // last write position, in bytes
bool dsound_running;
HANDLE thread;
@ -303,7 +303,7 @@ private:
int i = (int)SendMessage(GetDlgItem(hWnd, IDC_DS_DEVICE), CB_GETCURSEL, 0, 0);
if (!m_devices[i].hasGuid) {
m_Device[0] = 0; // clear device name to ""
m_Device[0] = 0; // clear device name to ""
} else {
swprintf_s(temp, L"{%08x-%04x-%04x-%02x%02x-%02x%02x%02x%02x%02x%02x}",
m_devices[i].guid.Data1,

18
plugins/spu2-x/src/Windows/SndOut_XAudio2.cpp
View File

@ -285,20 +285,20 @@ public:
// This doesn't always work though, so let it be a user configurable option.
int speakers;
switch (numSpeakers) // speakers = (numSpeakers + 1) *2; ?
switch (numSpeakers) // speakers = (numSpeakers + 1) *2; ?
{
case 0:
speakers = 2;
break; // Stereo
break; // Stereo
case 1:
speakers = 4;
break; // Quadrafonic
break; // Quadrafonic
case 2:
speakers = 6;
break; // Surround 5.1
break; // Surround 5.1
case 3:
speakers = 8;
break; // Surround 7.1
break; // Surround 7.1
default:
speakers = 2;
}
@ -338,20 +338,20 @@ public:
switch (dplLevel) {
case 0:
ConLog("* SPU2 > 5.1 speaker expansion enabled.\n");
voiceContext = new StreamingVoice<Stereo51Out16>(pXAudio2); //"normal" stereo upmix
voiceContext = new StreamingVoice<Stereo51Out16>(pXAudio2); //"normal" stereo upmix
break;
case 1:
ConLog("* SPU2 > 5.1 speaker expansion with basic ProLogic dematrixing enabled.\n");
voiceContext = new StreamingVoice<Stereo51Out16Dpl>(pXAudio2); // basic Dpl decoder without rear stereo balancing
voiceContext = new StreamingVoice<Stereo51Out16Dpl>(pXAudio2); // basic Dpl decoder without rear stereo balancing
break;
case 2:
ConLog("* SPU2 > 5.1 speaker expansion with experimental ProLogicII dematrixing enabled.\n");
voiceContext = new StreamingVoice<Stereo51Out16DplII>(pXAudio2); //gigas PLII
voiceContext = new StreamingVoice<Stereo51Out16DplII>(pXAudio2); //gigas PLII
break;
}
break;
default: // anything 8 or more gets the 7.1 treatment!
default: // anything 8 or more gets the 7.1 treatment!
ConLog("* SPU2 > 7.1 speaker expansion enabled.\n");
voiceContext = new StreamingVoice<Stereo51Out16>(pXAudio2);
break;

18
plugins/spu2-x/src/Windows/SndOut_XAudio2_27.cpp
View File

@ -294,20 +294,20 @@ public:
// This doesn't always work though, so let it be a user configurable option.
int speakers;
switch (numSpeakers) // speakers = (numSpeakers + 1) *2; ?
switch (numSpeakers) // speakers = (numSpeakers + 1) *2; ?
{
case 0:
speakers = 2;
break; // Stereo
break; // Stereo
case 1:
speakers = 4;
break; // Quadrafonic
break; // Quadrafonic
case 2:
speakers = 6;
break; // Surround 5.1
break; // Surround 5.1
case 3:
speakers = 8;
break; // Surround 7.1
break; // Surround 7.1
default:
speakers = 2;
}
@ -350,20 +350,20 @@ public:
switch (dplLevel) {
case 0:
ConLog("* SPU2 > 5.1 speaker expansion enabled.\n");
voiceContext = new StreamingVoice<Stereo51Out16>(pXAudio2); //"normal" stereo upmix
voiceContext = new StreamingVoice<Stereo51Out16>(pXAudio2); //"normal" stereo upmix
break;
case 1:
ConLog("* SPU2 > 5.1 speaker expansion with basic ProLogic dematrixing enabled.\n");
voiceContext = new StreamingVoice<Stereo51Out16Dpl>(pXAudio2); // basic Dpl decoder without rear stereo balancing
voiceContext = new StreamingVoice<Stereo51Out16Dpl>(pXAudio2); // basic Dpl decoder without rear stereo balancing
break;
case 2:
ConLog("* SPU2 > 5.1 speaker expansion with experimental ProLogicII dematrixing enabled.\n");
voiceContext = new StreamingVoice<Stereo51Out16DplII>(pXAudio2); //gigas PLII
voiceContext = new StreamingVoice<Stereo51Out16DplII>(pXAudio2); //gigas PLII
break;
}
break;
default: // anything 8 or more gets the 7.1 treatment!
default: // anything 8 or more gets the 7.1 treatment!
ConLog("* SPU2 > 7.1 speaker expansion enabled.\n");
voiceContext = new StreamingVoice<Stereo51Out16>(pXAudio2);
break;

2
plugins/spu2-x/src/Windows/SndOut_waveOut.cpp
View File

@ -160,7 +160,7 @@ public:
whbuffer[i].lpNext = 0;
whbuffer[i].reserved = 0;
waveOutPrepareHeader(hwodevice, whbuffer + i, sizeof(WAVEHDR));
whbuffer[i].dwFlags |= WHDR_DONE; //avoid deadlock
whbuffer[i].dwFlags |= WHDR_DONE; //avoid deadlock
}
// Start Thread

20
plugins/spu2-x/src/Windows/dsp.h
View File

@ -29,28 +29,28 @@
typedef struct winampDSPModule
{
char *description; // description
HWND hwndParent; // parent window (filled in by calling app)
HINSTANCE hDllInstance; // instance handle to this DLL (filled in by calling app)
char *description; // description
HWND hwndParent; // parent window (filled in by calling app)
HINSTANCE hDllInstance; // instance handle to this DLL (filled in by calling app)
void (*Config)(struct winampDSPModule *this_mod); // configuration dialog (if needed)
int (*Init)(struct winampDSPModule *this_mod); // 0 on success, creates window, etc (if needed)
void (*Config)(struct winampDSPModule *this_mod); // configuration dialog (if needed)
int (*Init)(struct winampDSPModule *this_mod); // 0 on success, creates window, etc (if needed)
// modify waveform samples: returns number of samples to actually write
// (typically numsamples, but no more than twice numsamples, and no less than half numsamples)
// numsamples should always be at least 128. should, but I'm not sure
int (*ModifySamples)(struct winampDSPModule *this_mod, short int *samples, int numsamples, int bps, int nch, int srate);
void (*Quit)(struct winampDSPModule *this_mod); // called when unloading
void (*Quit)(struct winampDSPModule *this_mod); // called when unloading
void *userData; // user data, optional
void *userData; // user data, optional
} winampDSPModule;
typedef struct
{
int version; // DSP_HDRVER
char *description; // description of library
winampDSPModule *(*getModule)(int); // module retrieval function
int version; // DSP_HDRVER
char *description; // description of library
winampDSPModule *(*getModule)(int); // module retrieval function
} winampDSPHeader;
// exported symbols

78
plugins/spu2-x/src/defs.h
View File

@ -70,7 +70,7 @@ public:
}
void Update();
void RegSet(u16 src); // used to set the volume from a register source (16 bit signed)
void RegSet(u16 src); // used to set the volume from a register source (16 bit signed)
void DebugDump(FILE *dump, const char *title, const char *nameLR);
};
@ -116,18 +116,18 @@ struct V_ADSR
u32 SustainLevel : 4,
DecayRate : 4,
AttackRate : 7,
AttackMode : 1, // 0 for linear (+lin), 1 for pseudo exponential (+exp)
AttackMode : 1, // 0 for linear (+lin), 1 for pseudo exponential (+exp)
ReleaseRate : 5,
ReleaseMode : 1, // 0 for linear (-lin), 1 for exponential (-exp)
ReleaseMode : 1, // 0 for linear (-lin), 1 for exponential (-exp)
SustainRate : 7,
SustainMode : 3; // 0 = +lin, 1 = -lin, 2 = +exp, 3 = -exp
SustainMode : 3; // 0 = +lin, 1 = -lin, 2 = +exp, 3 = -exp
};
};
s32 Value; // Ranges from 0 to 0x7fffffff (signed values are clamped to 0) [Reg_ENVX]
u8 Phase; // monitors current phase of ADSR envelope
bool Releasing; // Ready To Release, triggered by Voice.Stop();
s32 Value; // Ranges from 0 to 0x7fffffff (signed values are clamped to 0) [Reg_ENVX]
u8 Phase; // monitors current phase of ADSR envelope
bool Releasing; // Ready To Release, triggered by Voice.Stop();
public:
bool Calculate();
@ -136,7 +136,7 @@ public:
struct V_Voice
{
u32 PlayCycle; // SPU2 cycle where the Playing started
u32 PlayCycle; // SPU2 cycle where the Playing started
V_VolumeSlideLR Volume;
@ -181,7 +181,7 @@ struct V_Voice
// Last outputted audio value, used for voice modulation.
s32 OutX;
s32 NextCrest; // temp value for Crest calculation
s32 NextCrest; // temp value for Crest calculation
// SBuffer now points directly to an ADPCM cache entry.
s16 *SBuffer;
@ -329,10 +329,10 @@ struct V_CoreRegs
struct V_VoiceGates
{
s16 DryL; // 'AND Gate' for Direct Output to Left Channel
s16 DryR; // 'AND Gate' for Direct Output for Right Channel
s16 WetL; // 'AND Gate' for Effect Output for Left Channel
s16 WetR; // 'AND Gate' for Effect Output for Right Channel
s16 DryL; // 'AND Gate' for Direct Output to Left Channel
s16 DryR; // 'AND Gate' for Direct Output for Right Channel
s16 WetL; // 'AND Gate' for Effect Output for Left Channel
s16 WetR; // 'AND Gate' for Effect Output for Right Channel
};
struct V_CoreGates
@ -343,12 +343,12 @@ struct V_CoreGates
struct
{
s16 InpL; // Sound Data Input to Direct Output (Left)
s16 InpR; // Sound Data Input to Direct Output (Right)
s16 SndL; // Voice Data to Direct Output (Left)
s16 SndR; // Voice Data to Direct Output (Right)
s16 ExtL; // External Input to Direct Output (Left)
s16 ExtR; // External Input to Direct Output (Right)
s16 InpL; // Sound Data Input to Direct Output (Left)
s16 InpR; // Sound Data Input to Direct Output (Right)
s16 SndL; // Voice Data to Direct Output (Left)
s16 SndR; // Voice Data to Direct Output (Right)
s16 ExtL; // External Input to Direct Output (Left)
s16 ExtR; // External Input to Direct Output (Right)
};
};
};
@ -370,7 +370,7 @@ struct V_Core
{
static const uint NumVoices = 24;
int Index; // Core index identifier.
int Index; // Core index identifier.
// Voice Gates -- These are SSE-related values, and must always be
// first to ensure 16 byte alignment
@ -379,32 +379,32 @@ struct V_Core
V_CoreGates DryGate;
V_CoreGates WetGate;
V_VolumeSlideLR MasterVol; // Master Volume
V_VolumeLR ExtVol; // Volume for External Data Input
V_VolumeLR InpVol; // Volume for Sound Data Input
V_VolumeLR FxVol; // Volume for Output from Effects
V_VolumeSlideLR MasterVol; // Master Volume
V_VolumeLR ExtVol; // Volume for External Data Input
V_VolumeLR InpVol; // Volume for Sound Data Input
V_VolumeLR FxVol; // Volume for Output from Effects
V_Voice Voices[NumVoices];
u32 IRQA; // Interrupt Address
u32 TSA; // DMA Transfer Start Address
u32 IRQA; // Interrupt Address
u32 TSA; // DMA Transfer Start Address
bool IRQEnable; // Interrupt Enable
bool FxEnable; // Effect Enable
bool Mute; // Mute
bool IRQEnable; // Interrupt Enable
bool FxEnable; // Effect Enable
bool Mute; // Mute
bool AdmaInProgress;
s8 DMABits; // DMA related?
s8 NoiseClk; // Noise Clock
u16 AutoDMACtrl; // AutoDMA Status
s32 DMAICounter; // DMA Interrupt Counter
u32 InputDataLeft; // Input Buffer
s8 DMABits; // DMA related?
s8 NoiseClk; // Noise Clock
u16 AutoDMACtrl; // AutoDMA Status
s32 DMAICounter; // DMA Interrupt Counter
u32 InputDataLeft; // Input Buffer
u32 InputPosRead;
u32 InputPosWrite;
u32 InputDataProgress;
V_Reverb Revb; // Reverb Registers
V_ReverbBuffers RevBuffers; // buffer pointers for reverb, pre-calculated and pre-clipped.
V_Reverb Revb; // Reverb Registers
V_ReverbBuffers RevBuffers; // buffer pointers for reverb, pre-calculated and pre-clipped.
u32 EffectsStartA;
u32 EffectsEndA;
u32 ExtEffectsStartA;
@ -417,7 +417,7 @@ struct V_Core
s32 EffectsBufferSize;
u32 EffectsBufferStart;
V_CoreRegs Regs; // Registers
V_CoreRegs Regs; // Registers
// Last samples to pass through the effects processor.
// Used because the effects processor works at 24khz and just pulls
@ -438,7 +438,7 @@ struct V_Core
u32 MADR;
u32 TADR;
u32 KeyOn; // not the KON register (though maybe it is)
u32 KeyOn; // not the KON register (though maybe it is)
// psxmode caches
u16 psxSoundDataTransferControl;
@ -463,7 +463,7 @@ struct V_Core
, DMAPtr(NULL)
{
}
V_Core(int idx); // our badass constructor
V_Core(int idx); // our badass constructor
~V_Core() throw();
void Init(int index);

138
plugins/spu2-x/src/regs.h
View File

@ -23,47 +23,47 @@
#define SPU2_VP(voice) ((voice)*16)
#define SPU2_VA(voice) ((voice)*12)
#define REG_VP_VOLL 0x0000 // Voice Volume Left
#define REG_VP_VOLR 0x0002 // Voice Volume Right
#define REG_VP_PITCH 0x0004 // Pitch
#define REG_VP_ADSR1 0x0006 // Envelope 1 (Attack-Decay-Sustain-Release)
#define REG_VP_ADSR2 0x0008 // Envelope 2 (Attack-Decay-Sustain-Release)
#define REG_VP_ENVX 0x000A // Current Envelope
#define REG_VP_VOLXL 0x000C // Current Voice Volume Left
#define REG_VP_VOLXR 0x000E // Current Voice Volume Right
#define REG_VP_VOLL 0x0000 // Voice Volume Left
#define REG_VP_VOLR 0x0002 // Voice Volume Right
#define REG_VP_PITCH 0x0004 // Pitch
#define REG_VP_ADSR1 0x0006 // Envelope 1 (Attack-Decay-Sustain-Release)
#define REG_VP_ADSR2 0x0008 // Envelope 2 (Attack-Decay-Sustain-Release)
#define REG_VP_ENVX 0x000A // Current Envelope
#define REG_VP_VOLXL 0x000C // Current Voice Volume Left
#define REG_VP_VOLXR 0x000E // Current Voice Volume Right
// .. repeated for each voice ..
#define REG_S_PMON 0x0180 // Pitch Modulation Spec.
#define REG_S_NON 0x0184 // Alloc Noise Generator
#define REG_S_VMIXL 0x0188 // Voice Output Mix Left (Dry)
#define REG_S_VMIXEL 0x018C // Voice Output Mix Left (Wet)
#define REG_S_VMIXR 0x0190 // Voice Output Mix Right (Dry)
#define REG_S_VMIXER 0x0194 // Voice Output Mix Right (Wet)
#define REG_S_PMON 0x0180 // Pitch Modulation Spec.
#define REG_S_NON 0x0184 // Alloc Noise Generator
#define REG_S_VMIXL 0x0188 // Voice Output Mix Left (Dry)
#define REG_S_VMIXEL 0x018C // Voice Output Mix Left (Wet)
#define REG_S_VMIXR 0x0190 // Voice Output Mix Right (Dry)
#define REG_S_VMIXER 0x0194 // Voice Output Mix Right (Wet)
#define REG_P_MMIX 0x0198 // Output Spec. After Voice Mix
#define REG_C_ATTR 0x019A // Core X Attrib
#define REG_A_IRQA 0x019C // Interrupt Address Spec.
#define REG_P_MMIX 0x0198 // Output Spec. After Voice Mix
#define REG_C_ATTR 0x019A // Core X Attrib
#define REG_A_IRQA 0x019C // Interrupt Address Spec.
#define REG_S_KON 0x01A0 // Key On 0/1
#define REG_S_KOFF 0x01A4 // Key Off 0/1
#define REG_S_KON 0x01A0 // Key On 0/1
#define REG_S_KOFF 0x01A4 // Key Off 0/1
#define REG_A_TSA 0x01A8 // Transfer starting address
#define REG__1AC 0x01AC // Transfer data
#define REG_A_TSA 0x01A8 // Transfer starting address
#define REG__1AC 0x01AC // Transfer data
#define REG__1AE 0x01AE
#define REG_S_ADMAS 0x01B0 // AutoDMA Status
#define REG_S_ADMAS 0x01B0 // AutoDMA Status
// 1b2, 1b4, 1b6, 1b8, 1ba, 1bc, 1be are unknown
#define REG_VA_SSA 0x01C0 // Waveform data starting address
#define REG_VA_LSAX 0x01C4 // Loop point address
#define REG_VA_NAX 0x01C8 // Waveform data that should be read next
#define REG_VA_SSA 0x01C0 // Waveform data starting address
#define REG_VA_LSAX 0x01C4 // Loop point address
#define REG_VA_NAX 0x01C8 // Waveform data that should be read next
// .. repeated for each voice ..
#define REG_A_ESA 0x02E0 //Address: Top address of working area for effects processing
#define R_FB_SRC_A 0x02E4 // Feedback Source A
#define R_FB_SRC_B 0x02E8 // Feedback Source B
#define REG_A_ESA 0x02E0 //Address: Top address of working area for effects processing
#define R_FB_SRC_A 0x02E4 // Feedback Source A
#define R_FB_SRC_B 0x02E8 // Feedback Source B
#define R_IIR_DEST_A0 0x02EC
#define R_IIR_DEST_A1 0x02F0
#define R_ACC_SRC_A0 0x02F4
@ -78,17 +78,17 @@
#define R_ACC_SRC_C1 0x0318
#define R_ACC_SRC_D0 0x031C
#define R_ACC_SRC_D1 0x0320
#define R_IIR_SRC_B0 0x0324 // Some sources have R_IIR_SRC_B0 and R_IIR_SRC_B1 swapped ><
#define R_IIR_SRC_B1 0x0328 // Assume a typo in the docs and B0 is actually at 324, B1 at 328 in the HW.
#define R_IIR_SRC_B0 0x0324 // Some sources have R_IIR_SRC_B0 and R_IIR_SRC_B1 swapped ><
#define R_IIR_SRC_B1 0x0328 // Assume a typo in the docs and B0 is actually at 324, B1 at 328 in the HW.
#define R_MIX_DEST_A0 0x032C
#define R_MIX_DEST_A1 0x0330
#define R_MIX_DEST_B0 0x0334
#define R_MIX_DEST_B1 0x0338
#define REG_A_EEA 0x033C // Address: End address of working area for effects processing (upper part of address only!)
#define REG_A_EEA 0x033C // Address: End address of working area for effects processing (upper part of address only!)
#define REG_S_ENDX 0x0340 // End Point passed flag
#define REG_S_ENDX 0x0340 // End Point passed flag
#define REG_P_STATX 0x0344 // Status register?
#define REG_P_STATX 0x0344 // Status register?
// 0x346 .. 0x3fe are unknown (unused?)
@ -99,25 +99,25 @@
// "Different" register area
#define REG_P_MVOLL 0x0760 // Master Volume Left
#define REG_P_MVOLR 0x0762 // Master Volume Right
#define REG_P_EVOLL 0x0764 // Effect Volume Left
#define REG_P_EVOLR 0x0766 // Effect Volume Right
#define REG_P_AVOLL 0x0768 // Core External Input Volume Left (Only Core 1)
#define REG_P_AVOLR 0x076A // Core External Input Volume Right (Only Core 1)
#define REG_P_BVOLL 0x076C // Sound Data Volume Left
#define REG_P_BVOLR 0x076E // Sound Data Volume Right
#define REG_P_MVOLXL 0x0770 // Current Master Volume Left
#define REG_P_MVOLXR 0x0772 // Current Master Volume Right
#define REG_P_MVOLL 0x0760 // Master Volume Left
#define REG_P_MVOLR 0x0762 // Master Volume Right
#define REG_P_EVOLL 0x0764 // Effect Volume Left
#define REG_P_EVOLR 0x0766 // Effect Volume Right
#define REG_P_AVOLL 0x0768 // Core External Input Volume Left (Only Core 1)
#define REG_P_AVOLR 0x076A // Core External Input Volume Right (Only Core 1)
#define REG_P_BVOLL 0x076C // Sound Data Volume Left
#define REG_P_BVOLR 0x076E // Sound Data Volume Right
#define REG_P_MVOLXL 0x0770 // Current Master Volume Left
#define REG_P_MVOLXR 0x0772 // Current Master Volume Right
#define R_IIR_ALPHA 0x0774 //IIR alpha (% used)
#define R_IIR_ALPHA 0x0774 //IIR alpha (% used)
#define R_ACC_COEF_A 0x0776
#define R_ACC_COEF_B 0x0778
#define R_ACC_COEF_C 0x077A
#define R_ACC_COEF_D 0x077C
#define R_IIR_COEF 0x077E
#define R_FB_ALPHA 0x0780 //feedback alpha (% used)
#define R_FB_X 0x0782 //feedback
#define R_FB_ALPHA 0x0780 //feedback alpha (% used)
#define R_FB_X 0x0782 //feedback
#define R_IN_COEF_L 0x0784
#define R_IN_COEF_R 0x0786
@ -126,11 +126,11 @@
// End OF "Different" register area
// SPDIF interface
#define SPDIF_OUT 0x07C0 // SPDIF Out: OFF/'PCM'/Bitstream/Bypass
#define SPDIF_OUT 0x07C0 // SPDIF Out: OFF/'PCM'/Bitstream/Bypass
#define SPDIF_IRQINFO 0x07C2
#define SPDIF_MODE 0x07C6
#define SPDIF_MEDIA 0x07C8 // SPDIF Media: 'CD'/DVD
#define SPDIF_PROTECT 0x07CC // SPDIF Copy Protection
#define SPDIF_MEDIA 0x07C8 // SPDIF Media: 'CD'/DVD
#define SPDIF_PROTECT 0x07CC // SPDIF Copy Protection
/*********************************************************************
@ -147,38 +147,38 @@ Core attributes (SD_C)
*********************************************************************/
#define SPDIF_OUT_OFF 0x0000 // no spdif output
#define SPDIF_OUT_PCM 0x0020 // encode spdif from spu2 pcm output
#define SPDIF_OUT_BYPASS 0x0100 // bypass spu2 processing
#define SPDIF_OUT_OFF 0x0000 // no spdif output
#define SPDIF_OUT_PCM 0x0020 // encode spdif from spu2 pcm output
#define SPDIF_OUT_BYPASS 0x0100 // bypass spu2 processing
#define SPDIF_MODE_BYPASS_BITSTREAM 0x0002 // bypass mode for digital bitstream data
#define SPDIF_MODE_BYPASS_PCM 0x0000 // bypass mode for pcm data (using analog output)
#define SPDIF_MODE_BYPASS_BITSTREAM 0x0002 // bypass mode for digital bitstream data
#define SPDIF_MODE_BYPASS_PCM 0x0000 // bypass mode for pcm data (using analog output)
#define SPDIF_MODE_MEDIA_CD 0x0800 // source media is a CD
#define SPDIF_MODE_MEDIA_DVD 0x0000 // source media is a DVD
#define SPDIF_MODE_MEDIA_CD 0x0800 // source media is a CD
#define SPDIF_MODE_MEDIA_DVD 0x0000 // source media is a DVD
#define SPDIF_MEDIA_CDVD 0x0200
#define SPDIF_MEDIA_400 0x0000
#define SPDIF_PROTECT_NORMAL 0x0000 // spdif stream is not protected
#define SPDIF_PROTECT_PROHIBIT 0x8000 // spdif stream can't be copied
#define SPDIF_PROTECT_NORMAL 0x0000 // spdif stream is not protected
#define SPDIF_PROTECT_PROHIBIT 0x8000 // spdif stream can't be copied
/********************************************************************/
#define VOICE_PARAM_VOLL 0x0 // Voice Volume Left
#define VOICE_PARAM_VOLR 0x2 // Voice Volume Right
#define VOICE_PARAM_PITCH 0x4 // Pitch
#define VOICE_PARAM_ADSR1 0x6 // Envelope 1 (Attack-Delay-Sustain-Release)
#define VOICE_PARAM_ADSR2 0x8 // Envelope 2 (Attack-Delay-Sustain-Release)
#define VOICE_PARAM_ENVX 0xA // Current Envelope
#define VOICE_PARAM_VOLXL 0xC // Current Voice Volume Left
#define VOICE_PARAM_VOLXR 0xE // Current Voice Volume Right
#define VOICE_PARAM_VOLL 0x0 // Voice Volume Left
#define VOICE_PARAM_VOLR 0x2 // Voice Volume Right
#define VOICE_PARAM_PITCH 0x4 // Pitch
#define VOICE_PARAM_ADSR1 0x6 // Envelope 1 (Attack-Delay-Sustain-Release)
#define VOICE_PARAM_ADSR2 0x8 // Envelope 2 (Attack-Delay-Sustain-Release)
#define VOICE_PARAM_ENVX 0xA // Current Envelope
#define VOICE_PARAM_VOLXL 0xC // Current Voice Volume Left
#define VOICE_PARAM_VOLXR 0xE // Current Voice Volume Right
/********************************************************************/
#define VOICE_ADDR_SSA 0x0 // Waveform data starting address
#define VOICE_ADDR_LSAX 0x4 // Loop point address
#define VOICE_ADDR_NAX 0x8 // Waveform data that should be read next
#define VOICE_ADDR_SSA 0x0 // Waveform data starting address
#define VOICE_ADDR_LSAX 0x4 // Loop point address
#define VOICE_ADDR_NAX 0x8 // Waveform data that should be read next

10
plugins/spu2-x/src/spu2freeze.cpp
View File

@ -16,7 +16,7 @@
*/
#include "Global.h"
#include "PS2E-spu2.h" // hopefully temporary, until I resolve lClocks depdendency
#include "PS2E-spu2.h" // hopefully temporary, until I resolve lClocks depdendency
namespace Savestate
{
@ -35,11 +35,11 @@ static void wipe_the_cache()
struct Savestate::DataBlock
{
u32 spu2id; // SPU2-X state identifier lets ZeroGS/PeopsSPU2 know this isn't their state)
u8 unkregs[0x10000]; // SPU2 raw register memory
u8 mem[0x200000]; // SPU2 raw sample memory
u32 spu2id; // SPU2-X state identifier lets ZeroGS/PeopsSPU2 know this isn't their state)
u8 unkregs[0x10000]; // SPU2 raw register memory
u8 mem[0x200000]; // SPU2 raw sample memory
u32 version; // SPU2-X version identifier
u32 version; // SPU2-X version identifier
V_Core Cores[2];
V_SPDIF Spdif;
s16 OutPos;

362
plugins/spu2-x/src/spu2sys.cpp
View File

@ -25,7 +25,7 @@
#include "Global.h"
#include "Dma.h"
#include "PS2E-spu2.h" // needed until I figure out a nice solution for irqcallback dependencies.
#include "PS2E-spu2.h" // needed until I figure out a nice solution for irqcallback dependencies.
s16 *spu2regs = NULL;
s16 *_spu2mem = NULL;
@ -140,7 +140,7 @@ void V_Core::Init(int index)
WetGate.ExtR = 0;
}
Regs.MMIX = c ? 0xFFC : 0xFF0; // PS2 confirmed (f3c and f30 after BIOS ran, ffc and ff0 after sdinit)
Regs.MMIX = c ? 0xFFC : 0xFF0; // PS2 confirmed (f3c and f30 after BIOS ran, ffc and ff0 after sdinit)
Regs.VMIXL = 0xFFFFFF;
Regs.VMIXR = 0xFFFFFF;
Regs.VMIXEL = 0xFFFFFF;
@ -150,7 +150,7 @@ void V_Core::Init(int index)
ExtEffectsStartA = EffectsStartA;
ExtEffectsEndA = EffectsEndA;
FxEnable = 0; // Uninitialized it's 0 for both cores. Resetting libs however may set this to 0 or 1.
FxEnable = 0; // Uninitialized it's 0 for both cores. Resetting libs however may set this to 0 or 1.
// These are real PS2 values, mainly constant apart from a few bits: 0x3220EAA4, 0x40505E9C.
// These values mean nothing. They do not reflect the actual address the SPU2 is testing,
// it would seem that reading the IRQA register returns the last written value, not the
@ -160,7 +160,7 @@ void V_Core::Init(int index)
// in the input or output areas, so we're using 0x800.
// F1 2005 is known to rely on an uninitialised IRQA being an address which will be hit.
IRQA = 0x800;
IRQEnable = 0; // PS2 confirmed
IRQEnable = 0; // PS2 confirmed
for (uint v = 0; v < NumVoices; ++v) {
VoiceGates[v].DryL = -1;
@ -168,7 +168,7 @@ void V_Core::Init(int index)
VoiceGates[v].WetL = -1;
VoiceGates[v].WetR = -1;
Voices[v].Volume = V_VolumeSlideLR(0, 0); // V_VolumeSlideLR::Max;
Voices[v].Volume = V_VolumeSlideLR(0, 0); // V_VolumeSlideLR::Max;
Voices[v].SCurrent = 28;
Voices[v].ADSR.Value = 0;
@ -183,7 +183,7 @@ void V_Core::Init(int index)
AdmaInProgress = 0;
Regs.STATX = 0x80;
Regs.ENDX = 0xffffff; // PS2 confirmed
Regs.ENDX = 0xffffff; // PS2 confirmed
RevBuffers.NeedsUpdated = true;
UpdateEffectsBufferSize();
@ -258,7 +258,7 @@ void V_Core::UpdateEffectsBufferSize()
{
const s32 newbufsize = EffectsEndA - EffectsStartA + 1;
if ((newbufsize * 2) > 0x20000) // max 128kb per core
if ((newbufsize * 2) > 0x20000) // max 128kb per core
{
//printf("too big, returning\n");
//return;
@ -382,10 +382,10 @@ __forceinline void TimeUpdate(u32 cClocks)
UpdateDebugDialog();
#endif
if (SynchMode == 1) // AsyncMix on
if (SynchMode == 1) // AsyncMix on
SndBuffer::UpdateTempoChangeAsyncMixing();
else
TickInterval = 768; // Reset to default, in case the user hotswitched from async to something else.
TickInterval = 768; // Reset to default, in case the user hotswitched from async to something else.
//Update Mixing Progress
while (dClocks >= TickInterval) {
@ -448,7 +448,7 @@ __forceinline void UpdateSpdifMode()
{
int OPM = PlayMode;
if (Spdif.Out & 0x4) // use 24/32bit PCM data streaming
if (Spdif.Out & 0x4) // use 24/32bit PCM data streaming
{
PlayMode = 8;
ConLog("* SPU2-X: WARNING: Possibly CDDA mode set!\n");
@ -458,9 +458,9 @@ __forceinline void UpdateSpdifMode()
if (Spdif.Out & SPDIF_OUT_BYPASS) {
PlayMode = 2;
if (!(Spdif.Mode & SPDIF_MODE_BYPASS_BITSTREAM))
PlayMode = 4; //bitstream bypass
PlayMode = 4; //bitstream bypass
} else {
PlayMode = 0; //normal processing
PlayMode = 0; //normal processing
if (Spdif.Out & SPDIF_OUT_PCM) {
PlayMode = 1;
}
@ -496,7 +496,7 @@ static u32 map_spu2to1(u32 addr)
void V_Core::WriteRegPS1(u32 mem, u16 value)
{
pxAssume(Index == 0); // Valid on Core 0 only!
pxAssume(Index == 0); // Valid on Core 0 only!
bool show = true;
u32 reg = mem & 0xffff;
@ -506,13 +506,13 @@ void V_Core::WriteRegPS1(u32 mem, u16 value)
u8 voice = ((reg - 0x1c00) >> 4);
u8 vval = reg & 0xf;
switch (vval) {
case 0x0: //VOLL (Volume L)
case 0x2: //VOLR (Volume R)
case 0x0: //VOLL (Volume L)
case 0x2: //VOLR (Volume R)
{
V_VolumeSlide &thisvol = vval == 0 ? Voices[voice].Volume.Left : Voices[voice].Volume.Right;
thisvol.Reg_VOL = value;
if (value & 0x8000) // +Lin/-Lin/+Exp/-Exp
if (value & 0x8000) // +Lin/-Lin/+Exp/-Exp
{
thisvol.Mode = (value & 0xF000) >> 12;
thisvol.Increment = (value & 0x7F);
@ -542,16 +542,16 @@ void V_Core::WriteRegPS1(u32 mem, u16 value)
//ConLog("voice %x StartA write: %x\n", voice, Voices[voice].StartA);
break;
case 0x8: // ADSR1 (Envelope)
case 0x8: // ADSR1 (Envelope)
Voices[voice].ADSR.regADSR1 = value;
//ConLog("voice %x regADSR1 write: %x\n", voice, Voices[voice].ADSR.regADSR1);
break;
case 0xa: // ADSR2 (Envelope)
case 0xa: // ADSR2 (Envelope)
Voices[voice].ADSR.regADSR2 = value;
//ConLog("voice %x regADSR2 write: %x\n", voice, Voices[voice].ADSR.regADSR2);
break;
case 0xc: // Voice 0..23 ADSR Current Volume
case 0xc: // Voice 0..23 ADSR Current Volume
// not commonly set by games
Voices[voice].ADSR.Value = value * 0x10001U;
ConLog("voice %x ADSR.Value write: %x\n", voice, Voices[voice].ADSR.Value);
@ -567,71 +567,71 @@ void V_Core::WriteRegPS1(u32 mem, u16 value)
else
switch (reg) {
case 0x1d80: // Mainvolume left
case 0x1d80: // Mainvolume left
MasterVol.Left.Mode = 0;
MasterVol.Left.RegSet(value);
break;
case 0x1d82: // Mainvolume right
case 0x1d82: // Mainvolume right
MasterVol.Right.Mode = 0;
MasterVol.Right.RegSet(value);
break;
case 0x1d84: // Reverberation depth left
case 0x1d84: // Reverberation depth left
FxVol.Left = GetVol32(value);
break;
case 0x1d86: // Reverberation depth right
case 0x1d86: // Reverberation depth right
FxVol.Right = GetVol32(value);
break;
case 0x1d88: // Voice ON (0-15)
case 0x1d88: // Voice ON (0-15)
SPU2_FastWrite(REG_S_KON, value);
break;
case 0x1d8a: // Voice ON (16-23)
case 0x1d8a: // Voice ON (16-23)
SPU2_FastWrite(REG_S_KON + 2, value);
break;
case 0x1d8c: // Voice OFF (0-15)
case 0x1d8c: // Voice OFF (0-15)
SPU2_FastWrite(REG_S_KOFF, value);
break;
case 0x1d8e: // Voice OFF (16-23)
case 0x1d8e: // Voice OFF (16-23)
SPU2_FastWrite(REG_S_KOFF + 2, value);
break;
case 0x1d90: // Channel FM (pitch lfo) mode (0-15)
case 0x1d90: // Channel FM (pitch lfo) mode (0-15)
SPU2_FastWrite(REG_S_PMON, value);
if (value != 0)
ConLog("spu2x warning: wants to set Pitch Modulation reg1 to %x \n", value);
break;
case 0x1d92: // Channel FM (pitch lfo) mode (16-23)
case 0x1d92: // Channel FM (pitch lfo) mode (16-23)
SPU2_FastWrite(REG_S_PMON + 2, value);
if (value != 0)
ConLog("spu2x warning: wants to set Pitch Modulation reg2 to %x \n", value);
break;
case 0x1d94: // Channel Noise mode (0-15)
case 0x1d94: // Channel Noise mode (0-15)
SPU2_FastWrite(REG_S_NON, value);
if (value != 0)
ConLog("spu2x warning: wants to set Channel Noise mode reg1 to %x\n", value);
break;
case 0x1d96: // Channel Noise mode (16-23)
case 0x1d96: // Channel Noise mode (16-23)
SPU2_FastWrite(REG_S_NON + 2, value);
if (value != 0)
ConLog("spu2x warning: wants to set Channel Noise mode reg2 to %x\n", value);
break;
case 0x1d98: // 1F801D98h - Voice 0..23 Reverb mode aka Echo On (EON) (R/W)
case 0x1d98: // 1F801D98h - Voice 0..23 Reverb mode aka Echo On (EON) (R/W)
//Regs.VMIXEL = value & 0xFFFF;
SPU2_FastWrite(REG_S_VMIXEL, value);
SPU2_FastWrite(REG_S_VMIXER, value);
//ConLog("spu2x warning: setting reverb mode reg1 to %x \n", Regs.VMIXEL);
break;
case 0x1d9a: // 1F801D98h + 2 - Voice 0..23 Reverb mode aka Echo On (EON) (R/W)
case 0x1d9a: // 1F801D98h + 2 - Voice 0..23 Reverb mode aka Echo On (EON) (R/W)
//Regs.VMIXEL = value << 16;
SPU2_FastWrite(REG_S_VMIXEL + 2, value);
SPU2_FastWrite(REG_S_VMIXER + 2, value);
@ -648,17 +648,17 @@ void V_Core::WriteRegPS1(u32 mem, u16 value)
// SPU2_FastWrite(REG_S_VMIXL+2,value);
// SPU2_FastWrite(REG_S_VMIXR+2,value);
//break;
case 0x1d9c: // Voice 0..15 ON/OFF (status) (ENDX) (R) // writeable but hw overrides it shortly after
case 0x1d9c: // Voice 0..15 ON/OFF (status) (ENDX) (R) // writeable but hw overrides it shortly after
//Regs.ENDX &= 0xff0000;
ConLog("spu2x warning: wants to set ENDX reg1 to %x \n", value);
break;
case 0x1d9e: // // Voice 15..23 ON/OFF (status) (ENDX) (R) // writeable but hw overrides it shortly after
case 0x1d9e: // // Voice 15..23 ON/OFF (status) (ENDX) (R) // writeable but hw overrides it shortly after
//Regs.ENDX &= 0xffff;
ConLog("spu2x warning: wants to set ENDX reg2 to %x \n", value);
break;
case 0x1da2: // Reverb work area start
case 0x1da2: // Reverb work area start
{
EffectsStartA = map_spu1to2(value);
//EffectsEndA = 0xFFFFF; // fixed EndA in psx mode
@ -676,7 +676,7 @@ void V_Core::WriteRegPS1(u32 mem, u16 value)
//ConLog("SPU2-X Setting TSA to %x \n", TSA);
break;
case 0x1da8: // Spu Write to Memory
case 0x1da8: // Spu Write to Memory
//ConLog("SPU direct DMA Write. Current TSA = %x\n", TSA);
if (Cores[0].IRQEnable && (Cores[0].IRQA <= Cores[0].TSA)) {
SetIrqCall(0);
@ -690,30 +690,30 @@ void V_Core::WriteRegPS1(u32 mem, u16 value)
SPU2_FastWrite(REG_C_ATTR, value);
break;
case 0x1dac: // 1F801DACh - Sound RAM Data Transfer Control (should be 0004h)
case 0x1dac: // 1F801DACh - Sound RAM Data Transfer Control (should be 0004h)
ConLog("SPU Sound RAM Data Transfer Control (should be 4) : value = %x \n", value);
psxSoundDataTransferControl = value;
break;
case 0x1dae: // 1F801DAEh - SPU Status Register (SPUSTAT) (R)
// The SPUSTAT register should be treated read-only (writing is possible in so far that the written
// value can be read-back for a short moment, however, thereafter the hardware is overwriting that value).
//Regs.STATX = value;
case 0x1dae: // 1F801DAEh - SPU Status Register (SPUSTAT) (R)
// The SPUSTAT register should be treated read-only (writing is possible in so far that the written
// value can be read-back for a short moment, however, thereafter the hardware is overwriting that value).
//Regs.STATX = value;
break;
case 0x1DB0: // 1F801DB0h 4 CD Volume Left/Right
break; // cd left?
case 0x1DB0: // 1F801DB0h 4 CD Volume Left/Right
break; // cd left?
case 0x1DB2:
break; // cd right?
case 0x1DB4: // 1F801DB4h 4 Extern Volume Left / Right
break; // Extern left?
break; // cd right?
case 0x1DB4: // 1F801DB4h 4 Extern Volume Left / Right
break; // Extern left?
case 0x1DB6:
break; // Extern right?
case 0x1DB8: // 1F801DB8h 4 Current Main Volume Left/Right
break; // Current left?
break; // Extern right?
case 0x1DB8: // 1F801DB8h 4 Current Main Volume Left/Right
break; // Current left?
case 0x1DBA:
break; // Current right?
case 0x1DBC: // 1F801DBCh 4 Unknown? (R/W)
break; // Current right?
case 0x1DBC: // 1F801DBCh 4 Unknown? (R/W)
break;
case 0x1DBE:
break;
@ -792,10 +792,10 @@ void V_Core::WriteRegPS1(u32 mem, u16 value)
break;
case 0x1DF0:
Revb.IIR_SRC_B0 = value * 4;
break; // IIR_SRC_B0 and IIR_SRC_B1 supposedly swapped on SPU2
break; // IIR_SRC_B0 and IIR_SRC_B1 supposedly swapped on SPU2
case 0x1DF2:
Revb.IIR_SRC_B1 = value * 4;
break; // but I don't believe it! (games in psxmode sound better unswapped)
break; // but I don't believe it! (games in psxmode sound better unswapped)
case 0x1DF4:
Revb.MIX_DEST_A0 = value * 4;
break;
@ -824,7 +824,7 @@ void V_Core::WriteRegPS1(u32 mem, u16 value)
u16 V_Core::ReadRegPS1(u32 mem)
{
pxAssume(Index == 0); // Valid on Core 0 only!
pxAssume(Index == 0); // Valid on Core 0 only!
bool show = true;
u16 value = spu2Ru16(mem);
@ -836,13 +836,13 @@ u16 V_Core::ReadRegPS1(u32 mem)
u8 voice = ((reg - 0x1c00) >> 4);
u8 vval = reg & 0xf;
switch (vval) {
case 0x0: //VOLL (Volume L)
case 0x0: //VOLL (Volume L)
//value=Voices[voice].VolumeL.Mode;
//value=Voices[voice].VolumeL.Value;
value = Voices[voice].Volume.Left.Reg_VOL;
break;
case 0x2: //VOLR (Volume R)
case 0x2: //VOLR (Volume R)
//value=Voices[voice].VolumeR.Mode;
//value=Voices[voice].VolumeR.Value;
value = Voices[voice].Volume.Right.Reg_VOL;
@ -862,8 +862,8 @@ u16 V_Core::ReadRegPS1(u32 mem)
case 0xa:
value = Voices[voice].ADSR.regADSR2;
break;
case 0xc: // Voice 0..23 ADSR Current Volume
value = Voices[voice].ADSR.Value >> 16; // no clue
case 0xc: // Voice 0..23 ADSR Current Volume
value = Voices[voice].ADSR.Value >> 16; // no clue
//if (value != 0) ConLog("voice %d read ADSR.Value result = %x\n", voice, value);
break;
case 0xe:
@ -890,42 +890,42 @@ u16 V_Core::ReadRegPS1(u32 mem)
case 0x1d88:
value = 0;
break; // Voice 0..23 Key ON(Start Attack / Decay / Sustain) (W)
break; // Voice 0..23 Key ON(Start Attack / Decay / Sustain) (W)
case 0x1d8a:
value = 0;
break;
case 0x1d8c:
value = 0;
break; // Voice 0..23 Key OFF (Start Release) (W)
break; // Voice 0..23 Key OFF (Start Release) (W)
case 0x1d8e:
value = 0;
break;
case 0x1d90:
value = Regs.PMON & 0xFFFF;
break; // Voice 0..23 Channel FM(pitch lfo) mode(R / W)
break; // Voice 0..23 Channel FM(pitch lfo) mode(R / W)
case 0x1d92:
value = Regs.PMON >> 16;
break;
case 0x1d94:
value = Regs.NON & 0xFFFF;
break; // Voice 0..23 Channel Noise mode (R/W)
break; // Voice 0..23 Channel Noise mode (R/W)
case 0x1d96:
value = Regs.NON >> 16;
break;
case 0x1d98:
value = Regs.VMIXEL & 0xFFFF;
break; // Voice 0..23 Channel Reverb mode (R/W)
break; // Voice 0..23 Channel Reverb mode (R/W)
case 0x1d9a:
value = Regs.VMIXEL >> 16;
break;
/*case 0x1d9c: value = Regs.VMIXL&0xFFFF; break;*/ // this is wrong?
/*case 0x1d9c: value = Regs.VMIXL&0xFFFF; break;*/ // this is wrong?
/*case 0x1d9e: value = Regs.VMIXL >> 16; break;*/
case 0x1d9c:
value = Regs.ENDX & 0xFFFF;
break; // Voice 0..23 Channel ON / OFF(status) (R) (ENDX)
break; // Voice 0..23 Channel ON / OFF(status) (R) (ENDX)
case 0x1d9e:
value = Regs.ENDX >> 16;
@ -948,7 +948,7 @@ u16 V_Core::ReadRegPS1(u32 mem)
value = Cores[0].Regs.ATTR;
//ConLog("SPU2-X ps1 reg psxSPUCNT read return value: %x\n", value);
break;
case 0x1dac: // 1F801DACh - Sound RAM Data Transfer Control (should be 0004h)
case 0x1dac: // 1F801DACh - Sound RAM Data Transfer Control (should be 0004h)
value = psxSoundDataTransferControl;
break;
case 0x1dae:
@ -992,13 +992,13 @@ static void __fastcall RegWrite_VoiceParams(u16 value)
V_Voice &thisvoice = Cores[core].Voices[voice];
switch (param) {
case 0: //VOLL (Volume L)
case 1: //VOLR (Volume R)
case 0: //VOLL (Volume L)
case 1: //VOLR (Volume R)
{
V_VolumeSlide &thisvol = (param == 0) ? thisvoice.Volume.Left : thisvoice.Volume.Right;
thisvol.Reg_VOL = value;
if (value & 0x8000) // +Lin/-Lin/+Exp/-Exp
if (value & 0x8000) // +Lin/-Lin/+Exp/-Exp
{
thisvol.Mode = (value & 0xF000) >> 12;
thisvol.Increment = (value & 0x7F);
@ -1022,11 +1022,11 @@ static void __fastcall RegWrite_VoiceParams(u16 value)
thisvoice.Pitch = value & 0x3fff;
break;
case 3: // ADSR1 (Envelope)
case 3: // ADSR1 (Envelope)
thisvoice.ADSR.regADSR1 = value;
break;
case 4: // ADSR2 (Envelope)
case 4: // ADSR2 (Envelope)
thisvoice.ADSR.regADSR2 = value;
break;
@ -1057,13 +1057,13 @@ static void __fastcall RegWrite_VoiceAddr(u16 value)
V_Voice &thisvoice = Cores[core].Voices[voice];
switch (address) {
case 0: // SSA (Waveform Start Addr) (hiword, 4 bits only)
case 0: // SSA (Waveform Start Addr) (hiword, 4 bits only)
thisvoice.StartA = ((value & 0x0F) << 16) | (thisvoice.StartA & 0xFFF8);
if (IsDevBuild)
DebugCores[core].Voices[voice].lastSetStartA = thisvoice.StartA;
break;
case 1: // SSA (loword)
case 1: // SSA (loword)
thisvoice.StartA = (thisvoice.StartA & 0x0F0000) | (value & 0xFFF8);
if (IsDevBuild)
DebugCores[core].Voices[voice].lastSetStartA = thisvoice.StartA;
@ -1131,12 +1131,12 @@ static void __fastcall RegWrite_Core(u16 value)
bool fxenable = thiscore.FxEnable;
u8 oldDmaMode = thiscore.DmaMode;
thiscore.AttrBit0 = (value >> 0) & 0x01; //1 bit
thiscore.DMABits = (value >> 1) & 0x07; //3 bits
thiscore.DmaMode = (value >> 4) & 0x03; //2 bit (not necessary, we get the direction from the iop)
thiscore.IRQEnable = (value >> 6) & 0x01; //1 bit
thiscore.FxEnable = (value >> 7) & 0x01; //1 bit
thiscore.NoiseClk = (value >> 8) & 0x3f; //6 bits
thiscore.AttrBit0 = (value >> 0) & 0x01; //1 bit
thiscore.DMABits = (value >> 1) & 0x07; //3 bits
thiscore.DmaMode = (value >> 4) & 0x03; //2 bit (not necessary, we get the direction from the iop)
thiscore.IRQEnable = (value >> 6) & 0x01; //1 bit
thiscore.FxEnable = (value >> 7) & 0x01; //1 bit
thiscore.NoiseClk = (value >> 8) & 0x3f; //6 bits
//thiscore.Mute =(value>>14) & 0x01; //1 bit
thiscore.Mute = 0;
//thiscore.CoreEnabled=(value>>15) & 0x01; //1 bit
@ -1154,7 +1154,7 @@ static void __fastcall RegWrite_Core(u16 value)
if (oldDmaMode != thiscore.DmaMode) {
// FIXME... maybe: if this mode was cleared in the middle of a DMA, should we interrupt it?
thiscore.Regs.STATX &= ~0x400; // ready to transfer
thiscore.Regs.STATX &= ~0x400; // ready to transfer
}
if (value & 0x000E) {
@ -1349,16 +1349,16 @@ static void __fastcall RegWrite_Core(u16 value)
psxmode = true;
//memset(_spu2mem, 0, 0x200000);
Cores[1].FxEnable = 0;
Cores[1].EffectsStartA = 0x7FFF8; // park core1 effect area in inaccessible mem
Cores[1].EffectsStartA = 0x7FFF8; // park core1 effect area in inaccessible mem
Cores[1].EffectsEndA = 0x7FFFF;
Cores[1].ExtEffectsStartA = 0x7FFF8; // park core1 ext effect area in high mem
Cores[1].ExtEffectsStartA = 0x7FFF8; // park core1 ext effect area in high mem
Cores[1].ExtEffectsStartA = 0x7FFFF;
Cores[1].ReverbX = 0;
Cores[1].RevBuffers.NeedsUpdated = true;
Cores[0].ReverbX = 0;
Cores[0].RevBuffers.NeedsUpdated = true;
for (uint v = 0; v < 24; ++v) {
Cores[1].Voices[v].Volume = V_VolumeSlideLR(0, 0); // V_VolumeSlideLR::Max;
Cores[1].Voices[v].Volume = V_VolumeSlideLR(0, 0); // V_VolumeSlideLR::Max;
Cores[1].Voices[v].SCurrent = 28;
Cores[1].Voices[v].ADSR.Value = 0;
@ -1398,7 +1398,7 @@ static void __fastcall RegWrite_CoreExt(u16 value)
case REG_P_MVOLR: {
V_VolumeSlide &thisvol = (addr == REG_P_MVOLL) ? thiscore.MasterVol.Left : thiscore.MasterVol.Right;
if (value & 0x8000) // +Lin/-Lin/+Exp/-Exp
if (value & 0x8000) // +Lin/-Lin/+Exp/-Exp
{
thisvol.Mode = (value & 0xF000) >> 12;
thisvol.Increment = (value & 0x7F);
@ -1517,7 +1517,7 @@ static void __fastcall RegWrite_Null(u16 value)
typedef void __fastcall RegWriteHandler(u16 value);
static RegWriteHandler *const tbl_reg_writes[0x401] =
{
VoiceParamsCore(0), // 0x000 -> 0x180
VoiceParamsCore(0), // 0x000 -> 0x180
CoreParamsPair(0, REG_S_PMON),
CoreParamsPair(0, REG_S_NON),
CoreParamsPair(0, REG_S_VMIXL),
@ -1550,33 +1550,33 @@ static RegWriteHandler *const tbl_reg_writes[0x401] =
CoreParamsPair(0, REG_A_ESA),
ReverbPair(0, R_FB_SRC_A), // 0x02E4 // Feedback Source A
ReverbPair(0, R_FB_SRC_B), // 0x02E8 // Feedback Source B
ReverbPair(0, R_IIR_DEST_A0), // 0x02EC
ReverbPair(0, R_IIR_DEST_A1), // 0x02F0
ReverbPair(0, R_ACC_SRC_A0), // 0x02F4
ReverbPair(0, R_ACC_SRC_A1), // 0x02F8
ReverbPair(0, R_ACC_SRC_B0), // 0x02FC
ReverbPair(0, R_ACC_SRC_B1), // 0x0300
ReverbPair(0, R_IIR_SRC_A0), // 0x0304
ReverbPair(0, R_IIR_SRC_A1), // 0x0308
ReverbPair(0, R_IIR_DEST_B0), // 0x030C
ReverbPair(0, R_IIR_DEST_B1), // 0x0310
ReverbPair(0, R_ACC_SRC_C0), // 0x0314
ReverbPair(0, R_ACC_SRC_C1), // 0x0318
ReverbPair(0, R_ACC_SRC_D0), // 0x031C
ReverbPair(0, R_ACC_SRC_D1), // 0x0320
ReverbPair(0, R_IIR_SRC_B0), // 0x0324
ReverbPair(0, R_IIR_SRC_B1), // 0x0328
ReverbPair(0, R_MIX_DEST_A0), // 0x032C
ReverbPair(0, R_MIX_DEST_A1), // 0x0330
ReverbPair(0, R_MIX_DEST_B0), // 0x0334
ReverbPair(0, R_MIX_DEST_B1), // 0x0338
ReverbPair(0, R_FB_SRC_A), // 0x02E4 // Feedback Source A
ReverbPair(0, R_FB_SRC_B), // 0x02E8 // Feedback Source B
ReverbPair(0, R_IIR_DEST_A0), // 0x02EC
ReverbPair(0, R_IIR_DEST_A1), // 0x02F0
ReverbPair(0, R_ACC_SRC_A0), // 0x02F4
ReverbPair(0, R_ACC_SRC_A1), // 0x02F8
ReverbPair(0, R_ACC_SRC_B0), // 0x02FC
ReverbPair(0, R_ACC_SRC_B1), // 0x0300
ReverbPair(0, R_IIR_SRC_A0), // 0x0304
ReverbPair(0, R_IIR_SRC_A1), // 0x0308
ReverbPair(0, R_IIR_DEST_B0), // 0x030C
ReverbPair(0, R_IIR_DEST_B1), // 0x0310
ReverbPair(0, R_ACC_SRC_C0), // 0x0314
ReverbPair(0, R_ACC_SRC_C1), // 0x0318
ReverbPair(0, R_ACC_SRC_D0), // 0x031C
ReverbPair(0, R_ACC_SRC_D1), // 0x0320
ReverbPair(0, R_IIR_SRC_B0), // 0x0324
ReverbPair(0, R_IIR_SRC_B1), // 0x0328
ReverbPair(0, R_MIX_DEST_A0), // 0x032C
ReverbPair(0, R_MIX_DEST_A1), // 0x0330
ReverbPair(0, R_MIX_DEST_B0), // 0x0334
ReverbPair(0, R_MIX_DEST_B1), // 0x0338
RegWrite_Core<0, REG_A_EEA>, RegWrite_Null,
CoreParamsPair(0, REG_S_ENDX), // 0x0340 // End Point passed flag
RegWrite_Core<0, REG_P_STATX>, // 0x0344 // Status register?
CoreParamsPair(0, REG_S_ENDX), // 0x0340 // End Point passed flag
RegWrite_Core<0, REG_P_STATX>, // 0x0344 // Status register?
//0x346 here
REGRAW(0x346),
@ -1607,7 +1607,7 @@ static RegWriteHandler *const tbl_reg_writes[0x401] =
// AND... we reached 0x400!
// Last verse, same as the first:
VoiceParamsCore(1), // 0x000 -> 0x180
VoiceParamsCore(1), // 0x000 -> 0x180
CoreParamsPair(1, REG_S_PMON),
CoreParamsPair(1, REG_S_NON),
CoreParamsPair(1, REG_S_VMIXL),
@ -1640,33 +1640,33 @@ static RegWriteHandler *const tbl_reg_writes[0x401] =
CoreParamsPair(1, REG_A_ESA),
ReverbPair(1, R_FB_SRC_A), // 0x02E4 // Feedback Source A
ReverbPair(1, R_FB_SRC_B), // 0x02E8 // Feedback Source B
ReverbPair(1, R_IIR_DEST_A0), // 0x02EC
ReverbPair(1, R_IIR_DEST_A1), // 0x02F0
ReverbPair(1, R_ACC_SRC_A0), // 0x02F4
ReverbPair(1, R_ACC_SRC_A1), // 0x02F8
ReverbPair(1, R_ACC_SRC_B0), // 0x02FC
ReverbPair(1, R_ACC_SRC_B1), // 0x0300
ReverbPair(1, R_IIR_SRC_A0), // 0x0304
ReverbPair(1, R_IIR_SRC_A1), // 0x0308
ReverbPair(1, R_IIR_DEST_B0), // 0x030C
ReverbPair(1, R_IIR_DEST_B1), // 0x0310
ReverbPair(1, R_ACC_SRC_C0), // 0x0314
ReverbPair(1, R_ACC_SRC_C1), // 0x0318
ReverbPair(1, R_ACC_SRC_D0), // 0x031C
ReverbPair(1, R_ACC_SRC_D1), // 0x0320
ReverbPair(1, R_IIR_SRC_B0), // 0x0324
ReverbPair(1, R_IIR_SRC_B1), // 0x0328
ReverbPair(1, R_MIX_DEST_A0), // 0x032C
ReverbPair(1, R_MIX_DEST_A1), // 0x0330
ReverbPair(1, R_MIX_DEST_B0), // 0x0334
ReverbPair(1, R_MIX_DEST_B1), // 0x0338
ReverbPair(1, R_FB_SRC_A), // 0x02E4 // Feedback Source A
ReverbPair(1, R_FB_SRC_B), // 0x02E8 // Feedback Source B
ReverbPair(1, R_IIR_DEST_A0), // 0x02EC
ReverbPair(1, R_IIR_DEST_A1), // 0x02F0
ReverbPair(1, R_ACC_SRC_A0), // 0x02F4
ReverbPair(1, R_ACC_SRC_A1), // 0x02F8
ReverbPair(1, R_ACC_SRC_B0), // 0x02FC
ReverbPair(1, R_ACC_SRC_B1), // 0x0300
ReverbPair(1, R_IIR_SRC_A0), // 0x0304
ReverbPair(1, R_IIR_SRC_A1), // 0x0308
ReverbPair(1, R_IIR_DEST_B0), // 0x030C
ReverbPair(1, R_IIR_DEST_B1), // 0x0310
ReverbPair(1, R_ACC_SRC_C0), // 0x0314
ReverbPair(1, R_ACC_SRC_C1), // 0x0318
ReverbPair(1, R_ACC_SRC_D0), // 0x031C
ReverbPair(1, R_ACC_SRC_D1), // 0x0320
ReverbPair(1, R_IIR_SRC_B0), // 0x0324
ReverbPair(1, R_IIR_SRC_B1), // 0x0328
ReverbPair(1, R_MIX_DEST_A0), // 0x032C
ReverbPair(1, R_MIX_DEST_A1), // 0x0330
ReverbPair(1, R_MIX_DEST_B0), // 0x0334
ReverbPair(1, R_MIX_DEST_B1), // 0x0338
RegWrite_Core<1, REG_A_EEA>, RegWrite_Null,
CoreParamsPair(1, REG_S_ENDX), // 0x0340 // End Point passed flag
RegWrite_Core<1, REG_P_STATX>, // 0x0344 // Status register?
CoreParamsPair(1, REG_S_ENDX), // 0x0340 // End Point passed flag
RegWrite_Core<1, REG_P_STATX>, // 0x0344 // Status register?
REGRAW(0x746),
REGRAW(0x748), REGRAW(0x74A), REGRAW(0x74C), REGRAW(0x74E),
@ -1675,64 +1675,64 @@ static RegWriteHandler *const tbl_reg_writes[0x401] =
// ------ -------
RegWrite_CoreExt<0, REG_P_MVOLL>, // 0x0760 // Master Volume Left
RegWrite_CoreExt<0, REG_P_MVOLR>, // 0x0762 // Master Volume Right
RegWrite_CoreExt<0, REG_P_EVOLL>, // 0x0764 // Effect Volume Left
RegWrite_CoreExt<0, REG_P_EVOLR>, // 0x0766 // Effect Volume Right
RegWrite_CoreExt<0, REG_P_AVOLL>, // 0x0768 // Core External Input Volume Left (Only Core 1)
RegWrite_CoreExt<0, REG_P_AVOLR>, // 0x076A // Core External Input Volume Right (Only Core 1)
RegWrite_CoreExt<0, REG_P_BVOLL>, // 0x076C // Sound Data Volume Left
RegWrite_CoreExt<0, REG_P_BVOLR>, // 0x076E // Sound Data Volume Right
RegWrite_CoreExt<0, REG_P_MVOLXL>, // 0x0770 // Current Master Volume Left
RegWrite_CoreExt<0, REG_P_MVOLXR>, // 0x0772 // Current Master Volume Right
RegWrite_CoreExt<0, REG_P_MVOLL>, // 0x0760 // Master Volume Left
RegWrite_CoreExt<0, REG_P_MVOLR>, // 0x0762 // Master Volume Right
RegWrite_CoreExt<0, REG_P_EVOLL>, // 0x0764 // Effect Volume Left
RegWrite_CoreExt<0, REG_P_EVOLR>, // 0x0766 // Effect Volume Right
RegWrite_CoreExt<0, REG_P_AVOLL>, // 0x0768 // Core External Input Volume Left (Only Core 1)
RegWrite_CoreExt<0, REG_P_AVOLR>, // 0x076A // Core External Input Volume Right (Only Core 1)
RegWrite_CoreExt<0, REG_P_BVOLL>, // 0x076C // Sound Data Volume Left
RegWrite_CoreExt<0, REG_P_BVOLR>, // 0x076E // Sound Data Volume Right
RegWrite_CoreExt<0, REG_P_MVOLXL>, // 0x0770 // Current Master Volume Left
RegWrite_CoreExt<0, REG_P_MVOLXR>, // 0x0772 // Current Master Volume Right
RegWrite_CoreExt<0, R_IIR_ALPHA>, // 0x0774 //IIR alpha (% used)
RegWrite_CoreExt<0, R_ACC_COEF_A>, // 0x0776
RegWrite_CoreExt<0, R_ACC_COEF_B>, // 0x0778
RegWrite_CoreExt<0, R_ACC_COEF_C>, // 0x077A
RegWrite_CoreExt<0, R_ACC_COEF_D>, // 0x077C
RegWrite_CoreExt<0, R_IIR_COEF>, // 0x077E
RegWrite_CoreExt<0, R_FB_ALPHA>, // 0x0780 //feedback alpha (% used)
RegWrite_CoreExt<0, R_FB_X>, // 0x0782 //feedback
RegWrite_CoreExt<0, R_IN_COEF_L>, // 0x0784
RegWrite_CoreExt<0, R_IN_COEF_R>, // 0x0786
RegWrite_CoreExt<0, R_IIR_ALPHA>, // 0x0774 //IIR alpha (% used)
RegWrite_CoreExt<0, R_ACC_COEF_A>, // 0x0776
RegWrite_CoreExt<0, R_ACC_COEF_B>, // 0x0778
RegWrite_CoreExt<0, R_ACC_COEF_C>, // 0x077A
RegWrite_CoreExt<0, R_ACC_COEF_D>, // 0x077C
RegWrite_CoreExt<0, R_IIR_COEF>, // 0x077E
RegWrite_CoreExt<0, R_FB_ALPHA>, // 0x0780 //feedback alpha (% used)
RegWrite_CoreExt<0, R_FB_X>, // 0x0782 //feedback
RegWrite_CoreExt<0, R_IN_COEF_L>, // 0x0784
RegWrite_CoreExt<0, R_IN_COEF_R>, // 0x0786
// ------ -------
RegWrite_CoreExt<1, REG_P_MVOLL>, // 0x0788 // Master Volume Left
RegWrite_CoreExt<1, REG_P_MVOLR>, // 0x078A // Master Volume Right
RegWrite_CoreExt<1, REG_P_EVOLL>, // 0x0764 // Effect Volume Left
RegWrite_CoreExt<1, REG_P_EVOLR>, // 0x0766 // Effect Volume Right
RegWrite_CoreExt<1, REG_P_AVOLL>, // 0x0768 // Core External Input Volume Left (Only Core 1)
RegWrite_CoreExt<1, REG_P_AVOLR>, // 0x076A // Core External Input Volume Right (Only Core 1)
RegWrite_CoreExt<1, REG_P_BVOLL>, // 0x076C // Sound Data Volume Left
RegWrite_CoreExt<1, REG_P_BVOLR>, // 0x076E // Sound Data Volume Right
RegWrite_CoreExt<1, REG_P_MVOLXL>, // 0x0770 // Current Master Volume Left
RegWrite_CoreExt<1, REG_P_MVOLXR>, // 0x0772 // Current Master Volume Right
RegWrite_CoreExt<1, REG_P_MVOLL>, // 0x0788 // Master Volume Left
RegWrite_CoreExt<1, REG_P_MVOLR>, // 0x078A // Master Volume Right
RegWrite_CoreExt<1, REG_P_EVOLL>, // 0x0764 // Effect Volume Left
RegWrite_CoreExt<1, REG_P_EVOLR>, // 0x0766 // Effect Volume Right
RegWrite_CoreExt<1, REG_P_AVOLL>, // 0x0768 // Core External Input Volume Left (Only Core 1)
RegWrite_CoreExt<1, REG_P_AVOLR>, // 0x076A // Core External Input Volume Right (Only Core 1)
RegWrite_CoreExt<1, REG_P_BVOLL>, // 0x076C // Sound Data Volume Left
RegWrite_CoreExt<1, REG_P_BVOLR>, // 0x076E // Sound Data Volume Right
RegWrite_CoreExt<1, REG_P_MVOLXL>, // 0x0770 // Current Master Volume Left
RegWrite_CoreExt<1, REG_P_MVOLXR>, // 0x0772 // Current Master Volume Right
RegWrite_CoreExt<1, R_IIR_ALPHA>, // 0x0774 //IIR alpha (% used)
RegWrite_CoreExt<1, R_ACC_COEF_A>, // 0x0776
RegWrite_CoreExt<1, R_ACC_COEF_B>, // 0x0778
RegWrite_CoreExt<1, R_ACC_COEF_C>, // 0x077A
RegWrite_CoreExt<1, R_ACC_COEF_D>, // 0x077C
RegWrite_CoreExt<1, R_IIR_COEF>, // 0x077E
RegWrite_CoreExt<1, R_FB_ALPHA>, // 0x0780 //feedback alpha (% used)
RegWrite_CoreExt<1, R_FB_X>, // 0x0782 //feedback
RegWrite_CoreExt<1, R_IN_COEF_L>, // 0x0784
RegWrite_CoreExt<1, R_IN_COEF_R>, // 0x0786
RegWrite_CoreExt<1, R_IIR_ALPHA>, // 0x0774 //IIR alpha (% used)
RegWrite_CoreExt<1, R_ACC_COEF_A>, // 0x0776
RegWrite_CoreExt<1, R_ACC_COEF_B>, // 0x0778
RegWrite_CoreExt<1, R_ACC_COEF_C>, // 0x077A
RegWrite_CoreExt<1, R_ACC_COEF_D>, // 0x077C
RegWrite_CoreExt<1, R_IIR_COEF>, // 0x077E
RegWrite_CoreExt<1, R_FB_ALPHA>, // 0x0780 //feedback alpha (% used)
RegWrite_CoreExt<1, R_FB_X>, // 0x0782 //feedback
RegWrite_CoreExt<1, R_IN_COEF_L>, // 0x0784
RegWrite_CoreExt<1, R_IN_COEF_R>, // 0x0786
REGRAW(0x7B0), REGRAW(0x7B2), REGRAW(0x7B4), REGRAW(0x7B6),
REGRAW(0x7B8), REGRAW(0x7BA), REGRAW(0x7BC), REGRAW(0x7BE),
// SPDIF interface
RegWrite_SPDIF<SPDIF_OUT>, // 0x07C0 // SPDIF Out: OFF/'PCM'/Bitstream/Bypass
RegWrite_SPDIF<SPDIF_IRQINFO>, // 0x07C2
RegWrite_SPDIF<SPDIF_OUT>, // 0x07C0 // SPDIF Out: OFF/'PCM'/Bitstream/Bypass
RegWrite_SPDIF<SPDIF_IRQINFO>, // 0x07C2
REGRAW(0x7C4),
RegWrite_SPDIF<SPDIF_MODE>, // 0x07C6
RegWrite_SPDIF<SPDIF_MEDIA>, // 0x07C8 // SPDIF Media: 'CD'/DVD
RegWrite_SPDIF<SPDIF_MODE>, // 0x07C6
RegWrite_SPDIF<SPDIF_MEDIA>, // 0x07C8 // SPDIF Media: 'CD'/DVD
REGRAW(0x7CA),
RegWrite_SPDIF<SPDIF_PROTECT>, // 0x07CC // SPDIF Copy Protection
RegWrite_SPDIF<SPDIF_PROTECT>, // 0x07CC // SPDIF Copy Protection
REGRAW(0x7CE),
REGRAW(0x7D0), REGRAW(0x7D2), REGRAW(0x7D4), REGRAW(0x7D6),
@ -1742,7 +1742,7 @@ static RegWriteHandler *const tbl_reg_writes[0x401] =
REGRAW(0x7F0), REGRAW(0x7F2), REGRAW(0x7F4), REGRAW(0x7F6),
REGRAW(0x7F8), REGRAW(0x7FA), REGRAW(0x7FC), REGRAW(0x7FE),
NULL // should be at 0x400! (we assert check it on startup)
NULL // should be at 0x400! (we assert check it on startup)
};