MemorySSA is often taking up an unreasonable fraction of runtime in
assertion enabled builds. Turns out that there is one code-path that
runs verifyMemorySSA() even if VerifyMemorySSA is not enabled. This
patch makes it conditional as well.
Differential Revision: https://reviews.llvm.org/D74505
Summary:
Combine three verification methods into one to improve compile time when asserts are enabled.
Motivated by PR44066.
Sample change of timings on testcase in PR44066 (release+asserts):
MSSA off or verification disabled: 1.13s.
MSSA on (ToT): 2.48s.
With patch: 2.03s.
With enabling DefUses after combining Domination+Ordering: 2.6s.
After also combining DefUses with Domination+Ordering: 2.06s (candidate to be taken out of EXPENSIVE_CHECKS).
Subscribers: Prazek, hiraditya, george.burgess.iv, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70618
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
Summary:
Regularly when moving an instruction that may not read or write memory,
the instruction is not modelled in MSSA, so not action is necessary.
For a non-conventional AA pipeline, MSSA needs to explicitly check when
creating accesses, so as to not model instructions that may not read and
write memory.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67562
llvm-svn: 372137
Summary:
Do not model debuginfo intrinsics in MemorySSA.
Regularly these are non-memory modifying instructions. With -disable-basicaa, they were being modelled as Defs.
Reviewers: george.burgess.iv
Subscribers: aprantl, Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67307
llvm-svn: 371565
Summary:
I'm not planning to check this in at the moment, but feedback is very welcome, in particular how this affects performance.
The feedback obtains here will guide the next steps towards enabling this.
This patch enables the use of MemorySSA in the loop pass manager.
Passes that currently use MemorySSA:
- EarlyCSE
Passes that use MemorySSA after this patch:
- EarlyCSE
- LICM
- SimpleLoopUnswitch
Loop passes that update MemorySSA (and do not use it yet, but could use it after this patch):
- LoopInstSimplify
- LoopSimplifyCFG
- LoopUnswitch
- LoopRotate
- LoopSimplify
- LCSSA
Loop passes that do *not* update MemorySSA:
- IndVarSimplify
- LoopDelete
- LoopIdiom
- LoopSink
- LoopUnroll
- LoopInterchange
- LoopUnrollAndJam
- LoopVectorize
- LoopReroll
- IRCE
Reviewers: chandlerc, george.burgess.iv, davide, sanjoy, gberry
Subscribers: jlebar, Prazek, dmgreen, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58311
llvm-svn: 370384
Summary:
When inserting uses from outside the MemorySSA creation, we don't
normally need to rename uses, based on the assumption that there will be
no inserted Phis (if Def existed that required a Phi, that Phi already
exists). However, when dealing with unreachable blocks, MemorySSA will
optimize away Phis whose incoming blocks are unreachable, and these Phis end
up being re-added when inserting a Use.
There are two potential solutions here:
1. Analyze the inserted Phis and clean them up if they are unneeded
(current method for cleaning up trivial phis does not cover this)
2. Leave the Phi in place and rename uses, the same way as whe inserting
defs.
This patch use approach 2.
Resolves first test in PR42940.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66033
llvm-svn: 369291
The verification I added has overly restrictive asserts.
Unreachable blocks can have any incoming value in practice, after an
update due to a "replaceAllUses" call when the repalced entry is
LiveOnEntry.
llvm-svn: 369050
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
Summary:
Verify that the incoming defs into phis are the last defs from the
respective incoming blocks.
When moving blocks, insertDef must RenameUses. Adding this verification
makes GVNHoist tests fail that uncovered this issue.
Reviewers: george.burgess.iv
Subscribers: jlebar, Prazek, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63147
llvm-svn: 367451
Summary:
LoopRotate may simplify instructions, leading to the new instructions not having memory accesses created for them.
Allow this behavior, by allowing the new access to be null when the template is null, and looking upwards for the proper defined access when dealing with simplified instructions.
Reviewers: george.burgess.iv
Subscribers: jlebar, Prazek, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65338
llvm-svn: 367352
Summary:
Originally the insertDef method was only used when building MemorySSA, and was limiting the number of Phi nodes that it created.
Now it's used for updates as well, and it can create additional Phis needed for correctness.
Make sure no Phis are created in unreachable blocks (condition met during MSSA build), otherwise the renamePass will find a null DTNode.
Resolves PR41640.
Reviewers: george.burgess.iv
Subscribers: jlebar, Prazek, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61410
llvm-svn: 359845
Summary:
MemorySSA keeps internal pointers of AA and DT.
If these get invalidated, so should MemorySSA.
Reviewers: george.burgess.iv, chandlerc
Subscribers: jlebar, Prazek, llvm-commits
Tags: LLVM
Differential Revision: https://reviews.llvm.org/D61043
llvm-svn: 359627
Summary:
MemorySSA keeps internal pointers of AA and DT.
If these get invalidated, so should MemorySSA.
Reviewers: george.burgess.iv, chandlerc
Subscribers: jlebar, Prazek, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61043
........
This was causing windows build bot failures
llvm-svn: 359555
Summary:
MemorySSA keeps internal pointers of AA and DT.
If these get invalidated, so should MemorySSA.
Reviewers: george.burgess.iv, chandlerc
Subscribers: jlebar, Prazek, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61043
llvm-svn: 359519
Summary:
Enabling MemorySSA in the old pass manager leads to MemorySSA being run
twice due to the fact that LCSSA and LoopSimplify do not preserve
MemorySSA. This is the first step to address that: target LCSSA.
LCSSA does not make any changes that invalidate MemorySSA, so it
preserves it by design. It must preserve AA as well, for this to hold.
After this patch, MemorySSA is still run twice in the old pass manager.
Step two follows: target LoopSimplify.
Subscribers: mehdi_amini, jlebar, Prazek, llvm-commits, george.burgess.iv, chandlerc
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60832
llvm-svn: 359032
Summary:
After introducing the limit for clobber walking, `walkToPhiOrClobber` would assert that the limit is at least 1 on entry.
The test included triggered that assert.
The callsite in `tryOptimizePhi` making the calls to `walkToPhiOrClobber` is structured like this:
```
while (true) {
if (getBlockingAccess()) { // calls walkToPhiOrClobber
}
for (...) {
walkToPhiOrClobber();
}
}
```
The cleanest fix is to check if the limit was reached inside `walkToPhiOrClobber`, and give an allowence of 1.
This approach not make any alias() calls (no calls to instructionClobbersQuery), so the performance condition is enforced.
The limit is set back to 0 if not used, as this provides info on the fact that we stopped before reaching a true clobber.
Reviewers: george.burgess.iv
Subscribers: jlebar, Prazek, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60479
llvm-svn: 358303
Summary:
Adding contained caching to AliasAnalysis. BasicAA is currently the only one using it.
AA changes:
- This patch is pulling the caches from BasicAAResults to AAResults, meaning the getModRefInfo call benefits from the IsCapturedCache as well when in "batch mode".
- All AAResultBase implementations add the QueryInfo member to all APIs. AAResults APIs maintain wrapper APIs such that all alias()/getModRefInfo call sites are unchanged.
- AA now provides a BatchAAResults type as a wrapper to AAResults. It keeps the AAResults instance and a QueryInfo instantiated to batch mode. It delegates all work to the AAResults instance with the batched QueryInfo. More API wrappers may be needed in BatchAAResults; only the minimum needed is currently added.
MemorySSA changes:
- All walkers are now templated on the AA used (AliasAnalysis=AAResults or BatchAAResults).
- At build time, we optimize uses; now we create a local walker (lives only as long as OptimizeUses does) using BatchAAResults.
- All Walkers have an internal AA and only use that now, never the AA in MemorySSA. The Walkers receive the AA they will use when built.
- The walker we use for queries after the build is instantiated on AliasAnalysis and is built after building MemorySSA and setting AA.
- All static methods doing walking are now templated on AliasAnalysisType if they are used both during build and after. If used only during build, the method now only takes a BatchAAResults. If used only after build, the method now takes an AliasAnalysis.
Subscribers: sanjoy, arsenm, jvesely, nhaehnle, jlebar, george.burgess.iv, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59315
llvm-svn: 356783
Code archaeology in D59315 revealed that MSSA should never be moved.
Rather than trying to check dynamically that this hasn't happened in the
verify() functions of Walkers, it's likely best to just delete its move
constructor.
Since all these verify() functions did is check that MSSA hasn't moved,
this allows us to remove these verify functions.
I can readd the verification checks if someone's super concerned about
us trying to `memcpy` MemorySSA or something somewhere, but I imagine we
have other problems if we're trying anything like that...
llvm-svn: 356641
Summary:
This verification may fail after certain transformations due to
BasicAA's fragility. Added a small explanation and a testcase that
triggers the assert in checkClobberSanity (before its removal).
Addresses PR40509.
Reviewers: george.burgess.iv
Subscribers: sanjoy, jlebar, llvm-commits, Prazek
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57973
llvm-svn: 353739
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Sanity will fail for this, since we're exploring getting a clobber
further than the sanity check expects.
Ideally we need to teach the sanity check to differentiate between the
two walkers based on the SkipSelf bool in the query.
llvm-svn: 350895
Summary:
The option enables loop transformations to hoist accesses that do not
have clobbers in the loop. If the clobber queries skips the starting
access, the result may be outside the loop instead of the header Phi.
Adding the walker that uses this option in a separate patch.
Reviewers: george.burgess.iv
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D55944
llvm-svn: 350551
minted `CallBase` class instead of the `CallSite` wrapper.
This moves the largest interwoven collection of APIs that traffic in
`CallSite`s. While a handful of these could have been migrated with
a minorly more shallow migration by converting from a `CallSite` to
a `CallBase`, it hardly seemed worth it. Most of the APIs needed to
migrate together because of the complex interplay of AA APIs and the
fact that converting from a `CallBase` to a `CallSite` isn't free in its
current implementation.
Out of tree users of these APIs can fairly reliably migrate with some
combination of `.getInstruction()` on the `CallSite` instance and
casting the resulting pointer. The most generic form will look like `CS`
-> `cast_or_null<CallBase>(CS.getInstruction())` but in most cases there
is a more elegant migration. Hopefully, this migrates enough APIs for
users to fully move from `CallSite` to the base class. All of the
in-tree users were easily migrated in that fashion.
Thanks for the review from Saleem!
Differential Revision: https://reviews.llvm.org/D55641
llvm-svn: 350503
Summary:
End goal is to update MemorySSA in all loop passes. LoopUnswitch clones all blocks in a loop. SimpleLoopUnswitch clones some blocks. LoopRotate clones some instructions.
Some of these loop passes also make CFG changes.
This is an API based on what I found needed in LoopUnswitch, SimpleLoopUnswitch, LoopRotate, LoopInstSimplify, LoopSimplifyCFG.
Adding dependent patches using this API for context.
Reviewers: george.burgess.iv, dberlin
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D45299
llvm-svn: 341855
verify*() methods are intended to have no side-effects (unless we detect
broken MSSA, in which case they assert()), and all of the other verify
methods are wrapped by `#ifndef NDEBUG`.
llvm-svn: 340793
We're currently getting this behavior implicitly, since we determine if
a Def's optimization is valid based on the ID of its defining access.
This is incorrect, though I wouldn't be surprised if this was masked in
part by that we're using a WeakVH to track what Defs are optimized to.
(Not to mention that we don't move Defs super often, AFAICT). I'll
submit a patch to fix this shortly.
This also includes a minor refactor to reduce duplication a bit.
No test is included, since like said, this already happens to be our
behavior. I'll add a test for this with my fix to the other bug
mentioned above.
llvm-svn: 340461
We're calling these functions quite a bit from outside of MemorySSA.cpp
now. Given that they're relatively simple one-liners, I think the style
preference is to have them inline.
llvm-svn: 340430
Summary: Expose VerifyMemorySSA as a debug option. If set, passes will call the MSSA->verifyMemorySSA() after calling into the updater's APIs when MemorySSA should be valid.
Reviewers: george.burgess.iv
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D50749
llvm-svn: 339795
