The index of an ExtractElementInst is not guaranteed to be a
ConstantInt. It can be any integer value. Check explicitly for
ConstantInts.
The new test cases illustrate scenarios where we crash without
this patch. I've also added another test case to check the matching
of extractelement vector ops works.
Reviewers: RKSimon, ABataev, dtemirbulatov, vporpo
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D74758
Summary:
We don't have control/verify what will be the RHS of the division, so it might
happen to be zero, causing UB.
Reviewers: Vasilis, RKSimon, ABataev
Reviewed By: ABataev
Subscribers: vporpo, ABataev, hiraditya, llvm-commits, vdmitrie
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72740
This attempts to teach the cost model in Arm that code such as:
%s = shl i32 %a, 3
%a = and i32 %s, %b
Can under Arm or Thumb2 become:
and r0, r1, r2, lsl #3
So the cost of the shift can essentially be free. To do this without
trying to artificially adjust the cost of the "and" instruction, it
needs to get the users of the shl and check if they are a type of
instruction that the shift can be folded into. And so it needs to have
access to the actual instruction in getArithmeticInstrCost, which if
available is added as an extra parameter much like getCastInstrCost.
We otherwise limit it to shifts with a single user, which should
hopefully handle most of the cases. The list of instruction that the
shift can be folded into include ADC, ADD, AND, BIC, CMP, EOR, MVN, ORR,
ORN, RSB, SBC and SUB. This translates to Add, Sub, And, Or, Xor and
ICmp.
Differential Revision: https://reviews.llvm.org/D70966
Summary:
Make SLPVectorize to recognize homogeneous aggregates like
`{<2 x float>, <2 x float>}`, `{{float, float}, {float, float}}`,
`[2 x {float, float}]` and so on.
It's a follow-up of https://reviews.llvm.org/D70068.
Merged `findBuildVector()` and `findBuildAggregate()` to
one `findBuildAggregate()` function making it recursive
to recognize multidimensional aggregates. Aggregates required
to be homogeneous.
Reviewers: RKSimon, ABataev, dtemirbulatov, spatel, vporpo
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70587
Summary:
Vector aggregate is homogeneous aggregate of vectors like `{ <2 x float>, <2 x float> }`.
This patch allows `findBuildAggregate()` to consider vector aggregates as
well as scalar ones. For instance, `{ <2 x float>, <2 x float> }` maps to `<4 x float>`.
Fixes vector part of llvm.org/PR42022
Reviewers: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70068
After speaking with Sanjay - seeing a number of miscompiles and working
on tracking down a testcase. None of the follow on patches seem to
have helped so far.
This reverts commit 8a0aa5310bccbb42d16d11db090419fcefdd1376.
After speaking with Sanjay - seeing a number of miscompiles and working
on tracking down a testcase. None of the follow on patches seem to
have helped so far.
This reverts commit 7ff57705ba196ce649d6034614b3b9df57e1f84f.
The 1st attempt was reverted because it revealed an existing
bug where we could produce invalid IR (use of value before
definition). That should be fixed with:
rG39de82ecc9c2
The bug manifests as replacing a reduction operand with an undef
value.
The problem appears to be limited to cases where a min/max reduction
has extra uses of the compare operand to the select.
In the general case, we are tracking "ExternallyUsedValues" and
an "IgnoreList" of the reduction operations, but those may not apply
to the final compare+select in a min/max reduction.
For that, we use replaceAllUsesWith (RAUW) to ensure that the new
vectorized reduction values are transferred to all subsequent users.
Differential Revision: https://reviews.llvm.org/D70148
As discussed in D70148 (and caused a revert of the original commit):
if we insert at the select, then we can produce invalid IR because
the replacement for the compare may have uses before the select.
This reverts commit e511c4b0dff1692c267addf17dce3cebe8f97faa:
Temporarily Revert:
"[SLP] Generalization of stores vectorization."
"[SLP] Fix -Wunused-variable. NFC"
"[SLP] Vectorize jumbled stores."
after fixing the problem with compile time.
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
The bug manifests as replacing a reduction operand with an undef
value.
The problem appears to be limited to cases where a min/max reduction
has extra uses of the compare operand to the select.
In the general case, we are tracking "ExternallyUsedValues" and
an "IgnoreList" of the reduction operations, but those may not apply
to the final compare+select in a min/max reduction.
For that, we use replaceAllUsesWith (RAUW) to ensure that the new
vectorized reduction values are transferred to all subsequent users.
Differential Revision: https://reviews.llvm.org/D70148
Summary: This patch introduces a new heuristic for guiding operand reordering. The new "look-ahead" heuristic can look beyond the immediate predecessors. This helps break ties when the immediate predecessors have identical opcodes (see lit test for examples).
Reviewers: RKSimon, ABataev, dtemirbulatov, Ayal, hfinkel, rnk
Reviewed By: RKSimon, dtemirbulatov
Subscribers: xbolva00, Carrot, hiraditya, phosek, rnk, rcorcs, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60897
We have a vector compare reduction problem seen in PR39665 comment 2:
https://bugs.llvm.org/show_bug.cgi?id=39665#c2
Or slightly reduced here:
define i1 @cmp2(<2 x double> %a0) {
%a = fcmp ogt <2 x double> %a0, <double 1.0, double 1.0>
%b = extractelement <2 x i1> %a, i32 0
%c = extractelement <2 x i1> %a, i32 1
%d = and i1 %b, %c
ret i1 %d
}
SLP would not attempt to turn this into a vector reduction because there is an
artificial lower limit on that transform. We can not completely remove that limit
without inducing regressions though, so this patch just hacks an extra attempt at
creating a 2-way reduction to the end of the analysis.
As shown in the test file, we are still not getting some of the motivating cases,
so follow-on patches will be needed to solve those cases.
Differential Revision: https://reviews.llvm.org/D59710
"[SLP] Generalization of stores vectorization."
"[SLP] Fix -Wunused-variable. NFC"
"[SLP] Vectorize jumbled stores."
As they're causing significant (10-30x) compile time regressions on
vectorizable code.
The primary cause of the compile-time regression is f228b5371647f471853c5fb3e6719823a42fe451.
This reverts commits:
f228b5371647f471853c5fb3e6719823a42fe451
5503455ccb3f5fcedced158332c016c8d3a7fa81
21d498c9c0f32dcab5bc89ac593aa813b533b43a
Summary:
If the GEP instructions are going to be vectorized, the indices in those
GEP instructions must be of the same type. Otherwise, the compiler may
crash when trying to build the vector constant.
Reviewers: RKSimon, spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69627
Summary:
Patch adds support for vectorization of the jumbled stores. The value
operands are vectorized and then shuffled in the right order before
store.
Reviewers: RKSimon, spatel, hfinkel, mkuper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43339
Summary:
Patch adds support for vectorization of the jumbled stores. The value
operands are vectorized and then shuffled in the right order before
store.
Reviewers: RKSimon, spatel, hfinkel, mkuper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43339
Stores are vectorized with maximum vectorization factor of 16. Patch
tries to improve the situation and use maximal vectorization factor.
Reviewers: spatel, RKSimon, mkuper, hfinkel
Differential Revision: https://reviews.llvm.org/D43582
The 1st attempt at this modified the cost model in a bad way to avoid the vectorization,
but that caused problems for other users (the loop vectorizer) of the cost model.
I don't see an ideal solution to these 2 related, potentially large, perf regressions:
https://bugs.llvm.org/show_bug.cgi?id=42708https://bugs.llvm.org/show_bug.cgi?id=43146
We decided that load combining was unsuitable for IR because it could obscure other
optimizations in IR. So we removed the LoadCombiner pass and deferred to the backend.
Therefore, preventing SLP from destroying load combine opportunities requires that it
recognizes patterns that could be combined later, but not do the optimization itself (
it's not a vector combine anyway, so it's probably out-of-scope for SLP).
Here, we add a cost-independent bailout with a conservative pattern match for a
multi-instruction sequence that can probably be reduced later.
In the x86 tests shown (and discussed in more detail in the bug reports), SDAG combining
will produce a single instruction on these tests like:
movbe rax, qword ptr [rdi]
or:
mov rax, qword ptr [rdi]
Not some (half) vector monstrosity as we currently do using SLP:
vpmovzxbq ymm0, dword ptr [rdi + 1] # ymm0 = mem[0],zero,zero,..
vpsllvq ymm0, ymm0, ymmword ptr [rip + .LCPI0_0]
movzx eax, byte ptr [rdi]
movzx ecx, byte ptr [rdi + 5]
shl rcx, 40
movzx edx, byte ptr [rdi + 6]
shl rdx, 48
or rdx, rcx
movzx ecx, byte ptr [rdi + 7]
shl rcx, 56
or rcx, rdx
or rcx, rax
vextracti128 xmm1, ymm0, 1
vpor xmm0, xmm0, xmm1
vpshufd xmm1, xmm0, 78 # xmm1 = xmm0[2,3,0,1]
vpor xmm0, xmm0, xmm1
vmovq rax, xmm0
or rax, rcx
vzeroupper
ret
Differential Revision: https://reviews.llvm.org/D67841
llvm-svn: 375025
In loop-vectorize, interleave count and vector factor depend on target register number. Currently, it does not
estimate different register pressure for different register class separately(especially for scalar type,
float type should not be on the same position with int type), so it's not accurate. Specifically,
it causes too many times interleaving/unrolling, result in too many register spills in loop body and hurting performance.
So we need classify the register classes in IR level, and importantly these are abstract register classes,
and are not the target register class of backend provided in td file. It's used to establish the mapping between
the types of IR values and the number of simultaneous live ranges to which we'd like to limit for some set of those types.
For example, POWER target, register num is special when VSX is enabled. When VSX is enabled, the number of int scalar register is 32(GPR),
float is 64(VSR), but for int and float vector register both are 64(VSR). So there should be 2 kinds of register class when vsx is enabled,
and 3 kinds of register class when VSX is NOT enabled.
It runs on POWER target, it makes big(+~30%) performance improvement in one specific bmk(503.bwaves_r) of spec2017 and no other obvious degressions.
Differential revision: https://reviews.llvm.org/D67148
llvm-svn: 374634
We failed to account for the target register width (max vector factor)
when vectorizing starting from GEPs. This causes vectorization to
proceed to obviously illegal widths as in:
https://bugs.llvm.org/show_bug.cgi?id=43578
For x86, this also means that SLP can produce rogue AVX or AVX512
code even when the user specifies a narrower vector width.
The AArch64 test in ext-trunc.ll appears to be better using the
narrower width. I'm not exactly sure what getelementptr.ll is trying
to do, but it's testing with "-slp-threshold=-18", so I'm not worried
about those diffs. The x86 test is an over-reduction from SPEC h264;
this patch appears to restore the perf loss caused by SLP when using
-march=haswell.
Differential Revision: https://reviews.llvm.org/D68667
llvm-svn: 374183
Also Revert "[LoopVectorize] Fix non-debug builds after rL374017"
This reverts commit 9f41deccc0e648a006c9f38e11919f181b6c7e0a.
This reverts commit 18b6fe07bcf44294f200bd2b526cb737ed275c04.
The patch is breaking PowerPC internal build, checked with author, reverting
on behalf of him for now due to timezone.
llvm-svn: 374091
In loop-vectorize, interleave count and vector factor depend on target register number. Currently, it does not
estimate different register pressure for different register class separately(especially for scalar type,
float type should not be on the same position with int type), so it's not accurate. Specifically,
it causes too many times interleaving/unrolling, result in too many register spills in loop body and hurting performance.
So we need classify the register classes in IR level, and importantly these are abstract register classes,
and are not the target register class of backend provided in td file. It's used to establish the mapping between
the types of IR values and the number of simultaneous live ranges to which we'd like to limit for some set of those types.
For example, POWER target, register num is special when VSX is enabled. When VSX is enabled, the number of int scalar register is 32(GPR),
float is 64(VSR), but for int and float vector register both are 64(VSR). So there should be 2 kinds of register class when vsx is enabled,
and 3 kinds of register class when VSX is NOT enabled.
It runs on POWER target, it makes big(+~30%) performance improvement in one specific bmk(503.bwaves_r) of spec2017 and no other obvious degressions.
Differential revision: https://reviews.llvm.org/D67148
llvm-svn: 374017
This reverts SVN r373833, as it caused a failed assert "Non-zero loop
cost expected" on building numerous projects, see PR43582 for details
and reproduction samples.
llvm-svn: 373882
I don't see an ideal solution to these 2 related, potentially large, perf regressions:
https://bugs.llvm.org/show_bug.cgi?id=42708https://bugs.llvm.org/show_bug.cgi?id=43146
We decided that load combining was unsuitable for IR because it could obscure other
optimizations in IR. So we removed the LoadCombiner pass and deferred to the backend.
Therefore, preventing SLP from destroying load combine opportunities requires that it
recognizes patterns that could be combined later, but not do the optimization itself (
it's not a vector combine anyway, so it's probably out-of-scope for SLP).
Here, we add a scalar cost model adjustment with a conservative pattern match and cost
summation for a multi-instruction sequence that can probably be reduced later.
This should prevent SLP from creating a vector reduction unless that sequence is
extremely cheap.
In the x86 tests shown (and discussed in more detail in the bug reports), SDAG combining
will produce a single instruction on these tests like:
movbe rax, qword ptr [rdi]
or:
mov rax, qword ptr [rdi]
Not some (half) vector monstrosity as we currently do using SLP:
vpmovzxbq ymm0, dword ptr [rdi + 1] # ymm0 = mem[0],zero,zero,..
vpsllvq ymm0, ymm0, ymmword ptr [rip + .LCPI0_0]
movzx eax, byte ptr [rdi]
movzx ecx, byte ptr [rdi + 5]
shl rcx, 40
movzx edx, byte ptr [rdi + 6]
shl rdx, 48
or rdx, rcx
movzx ecx, byte ptr [rdi + 7]
shl rcx, 56
or rcx, rdx
or rcx, rax
vextracti128 xmm1, ymm0, 1
vpor xmm0, xmm0, xmm1
vpshufd xmm1, xmm0, 78 # xmm1 = xmm0[2,3,0,1]
vpor xmm0, xmm0, xmm1
vmovq rax, xmm0
or rax, rcx
vzeroupper
ret
Differential Revision: https://reviews.llvm.org/D67841
llvm-svn: 373833
Initially SLP vectorizer replaced all going-to-be-vectorized
instructions with Undef values. It may break ScalarEvaluation and may
cause a crash.
Reworked SLP vectorizer so that it does not replace vectorized
instructions by UndefValue anymore. Instead vectorized instructions are
marked for deletion inside if BoUpSLP class and deleted upon class
destruction.
Reviewers: mzolotukhin, mkuper, hfinkel, RKSimon, davide, spatel
Subscribers: RKSimon, Gerolf, anemet, hans, majnemer, llvm-commits, sanjoy
Differential Revision: https://reviews.llvm.org/D29641
llvm-svn: 373166
Summary:
Initially SLP vectorizer replaced all going-to-be-vectorized
instructions with Undef values. It may break ScalarEvaluation and may
cause a crash.
Reworked SLP vectorizer so that it does not replace vectorized
instructions by UndefValue anymore. Instead vectorized instructions are
marked for deletion inside if BoUpSLP class and deleted upon class
destruction.
Reviewers: mzolotukhin, mkuper, hfinkel, RKSimon, davide, spatel
Subscribers: RKSimon, Gerolf, anemet, hans, majnemer, llvm-commits, sanjoy
Differential Revision: https://reviews.llvm.org/D29641
llvm-svn: 372626
The static analyzer is warning about potential null dereferences of dyn_cast<> results - in these cases we can safely use cast<> directly as we know that these cases should all be the correct type, which is why its working atm and anyway cast<> will assert if they aren't.
llvm-svn: 371973
This is a fix for:
https://bugs.llvm.org/show_bug.cgi?id=33958
It seems universally true that we would not want to transform this kind of
sequence on any target, but if that's not correct, then we could view this
as a target-specific cost model problem. We could also white-list ConstantInt,
ConstantFP, etc. rather than blacklist Global and ConstantExpr.
Differential Revision: https://reviews.llvm.org/D67362
llvm-svn: 371931
