Commit Graph

43 Commits

Author SHA1 Message Date
Craig Topper
a1467f07ff [X86] Don't set exception mask bits when modifying FPCW to change rounding mode for fp->int conversion
When we need to do an fp->int conversion using x87 instructions, we need to temporarily change the rounding mode to 0b11 and perform a store. To do this we save the old value of the fpcw to the stack, then set the fpcw to 0xc7f, do the store, then restore fpcw. But the 0xc7f value forces the exception mask bits 1. While this is what they would be in the default FP environment, as we move to support changing the FP environments, we shouldn't make this assumption.

This patch changes the code to explicitly OR 0xc00 with the old value so that only the rounding mode is changed. Unfortunately, this requires two stack temporaries instead of one. One to hold the old value and one to hold the new value. Without two stack temporaries we would need an additional GPR. We already need one to do the OR operation in. This is similar to what gcc and icc do for this operation. Though they are both better at reusing the stack temporaries when there are multiple truncates in a function(or at least in a basic block)

Differential Revision: https://reviews.llvm.org/D57788

llvm-svn: 354178
2019-02-15 21:59:33 +00:00
Craig Topper
e1dccb4d49 [X86] Print all register forms of x87 fadd/fsub/fdiv/fmul as having two arguments where on is %st.
All of these instructions consume one encoded register and the other register is %st. They either write the result to %st or the encoded register. Previously we printed both arguments when the encoded register was written. And we printed one argument when the result was written to %st. For the stack popping forms the encoded register is always the destination and we didn't print both operands. This was inconsistent with gcc and objdump and just makes the output assembly code harder to read.

This patch changes things to always print both operands making us consistent with gcc and objdump. The parser should still be able to handle the single register forms just as it did before. This also matches the GNU assembler behavior.

llvm-svn: 353061
2019-02-04 17:28:18 +00:00
Craig Topper
c4b858bb71 [X86] Print %st(0) as %st when its implicit to the instruction. Continue printing it as %st(0) when its encoded in the instruction.
This is a step back from the change I made in r352985. This appears to be more consistent with gcc and objdump behavior.

llvm-svn: 353015
2019-02-04 04:15:10 +00:00
Craig Topper
e50c657b48 [X86] Regenerate test to drop 'End function' comments some other other regex updates.
llvm-svn: 353014
2019-02-04 04:15:04 +00:00
Craig Topper
08dc72ab87 Revert r352985 "[X86] Print %st(0) as %st to match what gcc inline asm uses as the clobber name to make MS inline asm work correctly"
Looking into gcc and objdump behavior more this was overly aggressive. If the register is encoded in the instruction we should print %st(0), if its implicit we should print %st.

I'll be making a more directed change in a future patch.

llvm-svn: 353013
2019-02-04 04:15:02 +00:00
Craig Topper
91f5c96339 [X86] Print %st(0) as %st to match what gcc inline asm uses as the clobber name to make MS inline asm work correctly
Summary:
When calculating clobbers for MS style inline assembly we fail if the asm clobbers stack top because we print st(0) and try to pass it through the gcc register name check. This was found with when I attempted to make a emms/femms clobber all ST registers. If you use emms/femms in MS inline asm we would try to use st(0) as the clobber name but clang would think that wasn't a valid clobber name.

This also matches what objdump disassembly prints. It's also what is printed by gcc -S.

Reviewers: RKSimon, rnk, efriedma, spatel, andreadb, lebedev.ri

Reviewed By: rnk

Subscribers: eraman, gbedwell, lebedev.ri, llvm-commits

Differential Revision: https://reviews.llvm.org/D57621

llvm-svn: 352985
2019-02-03 07:53:39 +00:00
Geoff Berry
c7dbf2fe82 Re-enable "[MachineCopyPropagation] Extend pass to do COPY source forwarding"
Re-enable commit r323991 now that r325931 has been committed to make
MachineOperand::isRenamable() check more conservative w.r.t. code
changes and opt-in on a per-target basis.

llvm-svn: 326208
2018-02-27 16:59:10 +00:00
Quentin Colombet
94dff8006e Revert "[MachineCopyPropagation] Extend pass to do COPY source forwarding"
This reverts commit r323991.

This commit breaks target that don't model all the register constraints
in TableGen. So far the workaround was to set the
hasExtraXXXRegAllocReq, but it proves that it doesn't cover all the
cases.
For instance, when mutating an instruction (like in the lowering of
COPYs) the isRenamable flag is not properly updated. The same problem
will happen when attaching machine operand from one instruction to
another.

Geoff Berry is working on a fix in https://reviews.llvm.org/D43042.

llvm-svn: 325421
2018-02-17 03:05:33 +00:00
Geoff Berry
eb996ef33b [MachineCopyPropagation] Extend pass to do COPY source forwarding
Summary:
This change extends MachineCopyPropagation to do COPY source forwarding
and adds an additional run of the pass to the default pass pipeline just
after register allocation.

This version of this patch uses the newly added
MachineOperand::isRenamable bit to avoid forwarding registers is such a
way as to violate constraints that aren't captured in the
Machine IR (e.g. ABI or ISA constraints).

This change is a continuation of the work started in D30751.

Reviewers: qcolombet, javed.absar, MatzeB, jonpa, tstellar

Subscribers: tpr, mgorny, mcrosier, nhaehnle, nemanjai, jyknight, hfinkel, arsenm, inouehrs, eraman, sdardis, guyblank, fedor.sergeev, aheejin, dschuff, jfb, myatsina, llvm-commits

Differential Revision: https://reviews.llvm.org/D41835

llvm-svn: 323991
2018-02-01 18:54:01 +00:00
Francis Visoiu Mistrih
e40ab0ed31 [CodeGen] Print external symbols as $symbol in both MIR and debug output
Work towards the unification of MIR and debug output by printing
`$symbol` instead of `<es:symbol>`.

Only debug syntax is affected.

llvm-svn: 320681
2017-12-14 10:02:58 +00:00
Francis Visoiu Mistrih
a2d7c39420 [CodeGen] Use MachineOperand::print in the MIRPrinter for MO_Register.
Work towards the unification of MIR and debug output by refactoring the
interfaces.

For MachineOperand::print, keep a simple version that can be easily called
from `dump()`, and a more complex one which will be called from both the
MIRPrinter and MachineInstr::print.

Add extra checks inside MachineOperand for detached operands (operands
with getParent() == nullptr).

https://reviews.llvm.org/D40836

* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/kill: ([^ ]+) ([^ ]+)<def> ([^ ]+)/kill: \1 def \2 \3/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/kill: ([^ ]+) ([^ ]+) ([^ ]+)<def>/kill: \1 \2 def \3/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/kill: def ([^ ]+) ([^ ]+) ([^ ]+)<def>/kill: def \1 \2 def \3/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/<def>//g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/([^ ]+)<kill>/killed \1/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/([^ ]+)<imp-use,kill>/implicit killed \1/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/([^ ]+)<dead>/dead \1/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/([^ ]+)<def[ ]*,[ ]*dead>/dead \1/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/([^ ]+)<imp-def[ ]*,[ ]*dead>/implicit-def dead \1/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/([^ ]+)<imp-def>/implicit-def \1/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/([^ ]+)<imp-use>/implicit \1/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/([^ ]+)<internal>/internal \1/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" -o -name "*.s" \) -type f -print0 | xargs -0 sed -i '' -E 's/([^ ]+)<undef>/undef \1/g'

llvm-svn: 320022
2017-12-07 10:40:31 +00:00
Francis Visoiu Mistrih
30264d4391 [CodeGen] Unify MBB reference format in both MIR and debug output
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.

The MIR printer prints the IR name of a MBB only for block definitions.

* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix

Differential Revision: https://reviews.llvm.org/D40422

llvm-svn: 319665
2017-12-04 17:18:51 +00:00
Francis Visoiu Mistrih
961f3df27b [CodeGen] Print register names in lowercase in both MIR and debug output
As part of the unification of the debug format and the MIR format,
always print registers as lowercase.

* Only debug printing is affected. It now follows MIR.

Differential Revision: https://reviews.llvm.org/D40417

llvm-svn: 319187
2017-11-28 17:15:09 +00:00
Reid Kleckner
bfd9be426f [MC] Suppress .Lcfi labels when emitting textual assembly
Summary:
This suppresses the generation of .Lcfi labels in our textual assembler.
It was annoying that this generated cascading .Lcfi labels:
  llc foo.ll -o - | llvm-mc | llvm-mc

After three trips through MCAsmStreamer, we'd have three labels in the
output when none are necessary. We should only bother creating the
labels and frame data when making a real object file.

This supercedes D38605, which moved the entire .seh_ implementation into
MCObjectStreamer.

This has the advantage that we do more checking when emitting textual
assembly, as a minor efficiency cost. Outputting textual assembly is not
performance critical, so this shouldn't matter.

Reviewers: majnemer, MatzeB

Subscribers: qcolombet, nemanjai, javed.absar, eraman, hiraditya, JDevlieghere, llvm-commits

Differential Revision: https://reviews.llvm.org/D38638

llvm-svn: 315259
2017-10-10 00:57:36 +00:00
Geoff Berry
a1a23c617d Revert "Re-enable "[MachineCopyPropagation] Extend pass to do COPY source forwarding""
This reverts commit r314729.

Another bug has been encountered in an out-of-tree target reported by Quentin.

llvm-svn: 314814
2017-10-03 16:59:13 +00:00
Geoff Berry
ff1e9931cc Re-enable "[MachineCopyPropagation] Extend pass to do COPY source forwarding"
Issues addressed since original review:
- Avoid bug in regalloc greedy/machine verifier when forwarding to use
  in an instruction that re-defines the same virtual register.
- Fixed bug when forwarding to use in EarlyClobber instruction slot.
- Fixed incorrect forwarding to register definitions that showed up in
  explicit_uses() iterator (e.g. in INLINEASM).
- Moved removal of dead instructions found by
  LiveIntervals::shrinkToUses() outside of loop iterating over
  instructions to avoid instructions being deleted while pointed to by
  iterator.
- Fixed ARMLoadStoreOptimizer bug exposed by this change in r311907.
- The pass no longer forwards COPYs to physical register uses, since
  doing so can break code that implicitly relies on the physical
  register number of the use.
- The pass no longer forwards COPYs to undef uses, since doing so
  can break the machine verifier by creating LiveRanges that don't
  end on a use (since the undef operand is not considered a use).

  [MachineCopyPropagation] Extend pass to do COPY source forwarding

  This change extends MachineCopyPropagation to do COPY source forwarding.

  This change also extends the MachineCopyPropagation pass to be able to
  be run during register allocation, after physical registers have been
  assigned, but before the virtual registers have been re-written, which
  allows it to remove virtual register COPY LiveIntervals that become dead
  through the forwarding of all of their uses.

llvm-svn: 314729
2017-10-02 22:01:37 +00:00
Sam McCall
d1ec6cb1b1 Revert "Re-enable "[MachineCopyPropagation] Extend pass to do COPY source forwarding""
This crashes on boringSSL on PPC (will send reduced testcase)

This reverts commit r312328.

llvm-svn: 312490
2017-09-04 15:47:00 +00:00
Geoff Berry
27cff6cc6b Re-enable "[MachineCopyPropagation] Extend pass to do COPY source forwarding"
Issues addressed since original review:
- Moved removal of dead instructions found by
  LiveIntervals::shrinkToUses() outside of loop iterating over
  instructions to avoid instructions being deleted while pointed to by
  iterator.
- Fixed ARMLoadStoreOptimizer bug exposed by this change in r311907.
- The pass no longer forwards COPYs to physical register uses, since
  doing so can break code that implicitly relies on the physical
  register number of the use.
- The pass no longer forwards COPYs to undef uses, since doing so
  can break the machine verifier by creating LiveRanges that don't
  end on a use (since the undef operand is not considered a use).

  [MachineCopyPropagation] Extend pass to do COPY source forwarding

  This change extends MachineCopyPropagation to do COPY source forwarding.

  This change also extends the MachineCopyPropagation pass to be able to
  be run during register allocation, after physical registers have been
  assigned, but before the virtual registers have been re-written, which
  allows it to remove virtual register COPY LiveIntervals that become dead
  through the forwarding of all of their uses.

llvm-svn: 312328
2017-09-01 14:27:20 +00:00
Hans Wennborg
504991638f Revert r312154 "Re-enable "[MachineCopyPropagation] Extend pass to do COPY source forwarding""
It caused PR34387: Assertion failed: (RegNo < NumRegs && "Attempting to access record for invalid register number!")

> Issues identified by buildbots addressed since original review:
> - Fixed ARMLoadStoreOptimizer bug exposed by this change in r311907.
> - The pass no longer forwards COPYs to physical register uses, since
>   doing so can break code that implicitly relies on the physical
>   register number of the use.
> - The pass no longer forwards COPYs to undef uses, since doing so
>   can break the machine verifier by creating LiveRanges that don't
>   end on a use (since the undef operand is not considered a use).
>
>   [MachineCopyPropagation] Extend pass to do COPY source forwarding
>
>   This change extends MachineCopyPropagation to do COPY source forwarding.
>
>   This change also extends the MachineCopyPropagation pass to be able to
>   be run during register allocation, after physical registers have been
>   assigned, but before the virtual registers have been re-written, which
>   allows it to remove virtual register COPY LiveIntervals that become dead
>   through the forwarding of all of their uses.

llvm-svn: 312178
2017-08-30 22:11:37 +00:00
Geoff Berry
1d348d5dba Re-enable "[MachineCopyPropagation] Extend pass to do COPY source forwarding"
Issues identified by buildbots addressed since original review:
- Fixed ARMLoadStoreOptimizer bug exposed by this change in r311907.
- The pass no longer forwards COPYs to physical register uses, since
  doing so can break code that implicitly relies on the physical
  register number of the use.
- The pass no longer forwards COPYs to undef uses, since doing so
  can break the machine verifier by creating LiveRanges that don't
  end on a use (since the undef operand is not considered a use).

  [MachineCopyPropagation] Extend pass to do COPY source forwarding

  This change extends MachineCopyPropagation to do COPY source forwarding.

  This change also extends the MachineCopyPropagation pass to be able to
  be run during register allocation, after physical registers have been
  assigned, but before the virtual registers have been re-written, which
  allows it to remove virtual register COPY LiveIntervals that become dead
  through the forwarding of all of their uses.

llvm-svn: 312154
2017-08-30 18:41:07 +00:00
Geoff Berry
98025b9733 Revert "[MachineCopyPropagation] Extend pass to do COPY source forwarding" round 2
This reverts commit r311135.

sanitizer-x86_64-linux-android buildbot is timing out with just this
patch applied.

llvm-svn: 311142
2017-08-18 01:43:11 +00:00
Geoff Berry
a2071754c1 Re-enable "[MachineCopyPropagation] Extend pass to do COPY source forwarding"
Two issues identified by buildbots were addressed:
    - The pass no longer forwards COPYs to physical register uses, since
      doing so can break code that implicitly relies on the physical
      register number of the use.
    - The pass no longer forwards COPYs to undef uses, since doing so
      can break the machine verifier by creating LiveRanges that don't
      end on a use (since the undef operand is not considered a use).

    [MachineCopyPropagation] Extend pass to do COPY source forwarding

    This change extends MachineCopyPropagation to do COPY source forwarding.

    This change also extends the MachineCopyPropagation pass to be able to
    be run during register allocation, after physical registers have been
    assigned, but before the virtual registers have been re-written, which
    allows it to remove virtual register COPY LiveIntervals that become dead
    through the forwarding of all of their uses.

    Reviewers: qcolombet, javed.absar, MatzeB, jonpa

    Subscribers: jyknight, nemanjai, llvm-commits, nhaehnle, mcrosier, mgorny

    Differential Revision: https://reviews.llvm.org/D30751

llvm-svn: 311135
2017-08-17 23:06:55 +00:00
Geoff Berry
e88f26718b Revert "[MachineCopyPropagation] Extend pass to do COPY source forwarding"
This reverts commit r311038.

Several buildbots are breaking, and at least one appears to be due to
the forwarding of physical regs enabled by this change.  Reverting while
I investigate further.

llvm-svn: 311062
2017-08-17 04:04:11 +00:00
Geoff Berry
7825276490 [MachineCopyPropagation] Extend pass to do COPY source forwarding
This change extends MachineCopyPropagation to do COPY source forwarding.

This change also extends the MachineCopyPropagation pass to be able to
be run during register allocation, after physical registers have been
assigned, but before the virtual registers have been re-written, which
allows it to remove virtual register COPY LiveIntervals that become dead
through the forwarding of all of their uses.

Reviewers: qcolombet, javed.absar, MatzeB, jonpa

Subscribers: jyknight, nemanjai, llvm-commits, nhaehnle, mcrosier, mgorny

Differential Revision: https://reviews.llvm.org/D30751

llvm-svn: 311038
2017-08-16 20:50:01 +00:00
Simon Pilgrim
8e05f97d09 [X86][X87] Regenerate inline-asm tests
llvm-svn: 310201
2017-08-06 12:17:10 +00:00
Simon Pilgrim
ac9e2bdbda Updated test with -verify-machineinstrs to check for PR21931
llvm-svn: 288242
2016-11-30 13:21:12 +00:00
David Blaikie
3ea2df7c7b [opaque pointer type] Add textual IR support for explicit type parameter to gep operator
Similar to gep (r230786) and load (r230794) changes.

Similar migration script can be used to update test cases, which
successfully migrated all of LLVM and Polly, but about 4 test cases
needed manually changes in Clang.

(this script will read the contents of stdin and massage it into stdout
- wrap it in the 'apply.sh' script shown in previous commits + xargs to
apply it over a large set of test cases)

import fileinput
import sys
import re

rep = re.compile(r"(getelementptr(?:\s+inbounds)?\s*\()((<\d*\s+x\s+)?([^@]*?)(|\s*addrspace\(\d+\))\s*\*(?(3)>)\s*)(?=$|%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|zeroinitializer|<|\[\[[a-zA-Z]|\{\{)", re.MULTILINE | re.DOTALL)

def conv(match):
  line = match.group(1)
  line += match.group(4)
  line += ", "
  line += match.group(2)
  return line

line = sys.stdin.read()
off = 0
for match in re.finditer(rep, line):
  sys.stdout.write(line[off:match.start()])
  sys.stdout.write(conv(match))
  off = match.end()
sys.stdout.write(line[off:])

llvm-svn: 232184
2015-03-13 18:20:45 +00:00
David Blaikie
ab043ff680 [opaque pointer type] Add textual IR support for explicit type parameter to load instruction
Essentially the same as the GEP change in r230786.

A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)

import fileinput
import sys
import re

pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")

for line in sys.stdin:
  sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))

Reviewers: rafael, dexonsmith, grosser

Differential Revision: http://reviews.llvm.org/D7649

llvm-svn: 230794
2015-02-27 21:17:42 +00:00
Akira Hatanaka
2cf112b51e [X86] Simplify X87 stackifier pass.
Stop using ST registers for function returns and inline-asm instructions and use
FP registers instead. This allows removing a large amount of code in the
stackifier pass that was needed to track register liveness and handle copies
between ST and FP registers and function calls returning floating point values.

It also fixes a bug which manifests when an ST register defined by an
inline-asm instruction was live across another inline-asm instruction, as shown
in the following sequence of machine instructions:

1. INLINEASM <es:frndint> $0:[regdef], %ST0<imp-def,tied5>
2. INLINEASM <es:fldcw $0>
3. %FP0<def> = COPY %ST0

<rdar://problem/16952634>

llvm-svn: 214580
2014-08-01 22:19:41 +00:00
Daniel Sanders
7a3a160940 Re-commit: Demote EmitRawText call in AsmPrinter::EmitInlineAsm() and remove hasRawTextSupport() call
Summary:
AsmPrinter::EmitInlineAsm() will no longer use the EmitRawText() call for
targets with mature MC support. Such targets will always parse the inline
assembly (even when emitting assembly). Targets without mature MC support
continue to use EmitRawText() for assembly output.

The hasRawTextSupport() check in AsmPrinter::EmitInlineAsm() has been replaced
with MCAsmInfo::UseIntegratedAs which when true, causes the integrated assembler
to parse inline assembly (even when emitting assembly output). UseIntegratedAs
is set to true for targets that consider any failure to parse valid assembly
to be a bug. Target specific subclasses generally enable the integrated
assembler in their constructor. The default value can be overridden with
-no-integrated-as.

All tests that rely on inline assembly supporting invalid assembly (for example,
those that use mnemonics such as 'foo' or 'hello world') have been updated to
disable the integrated assembler.

Changes since review (and last commit attempt):
- Fixed test failures that were missed due to configuration of local build.
  (fixes crash.ll and a couple others).
- Fixed tests that happened to pass because the local build was on X86
  (should fix 2007-12-17-InvokeAsm.ll)
- mature-mc-support.ll's should no longer require all targets to be compiled.
  (should fix ARM and PPC buildbots)
- Object output (-filetype=obj and similar) now forces the integrated assembler
  to be enabled regardless of default setting or -no-integrated-as.
  (should fix SystemZ buildbots)

Reviewers: rafael

Reviewed By: rafael

CC: llvm-commits

Differential Revision: http://llvm-reviews.chandlerc.com/D2686

llvm-svn: 201333
2014-02-13 14:44:26 +00:00
Daniel Sanders
656c4d360b Revert r201237+r201238: Demote EmitRawText call in AsmPrinter::EmitInlineAsm() and remove hasRawTextSupport() call
It introduced multiple test failures in the buildbots.

llvm-svn: 201241
2014-02-12 15:39:20 +00:00
Daniel Sanders
e647d6441b Demote EmitRawText call in AsmPrinter::EmitInlineAsm() and remove hasRawTextSupport() call
Summary:
AsmPrinter::EmitInlineAsm() will no longer use the EmitRawText() call for targets with mature MC support. Such targets will always parse the inline assembly (even when emitting assembly). Targets without mature MC support continue to use EmitRawText() for assembly output.

The hasRawTextSupport() check in AsmPrinter::EmitInlineAsm() has been replaced with MCAsmInfo::UseIntegratedAs which when true, causes the integrated assembler to parse inline assembly (even when emitting assembly output). UseIntegratedAs is set to true for targets that consider any failure to parse valid assembly to be a bug. Target specific subclasses generally enable the integrated assembler in their constructor. The default value can be overridden with -no-integrated-as.

All tests that rely on inline assembly supporting invalid assembly (for example, those that use mnemonics such as 'foo' or 'hello world') have been updated to disable the integrated assembler.

Reviewers: rafael

Reviewed By: rafael

CC: llvm-commits

Differential Revision: http://llvm-reviews.chandlerc.com/D2686

llvm-svn: 201237
2014-02-12 14:44:54 +00:00
Stephen Lin
52ebde139c Disambiguate function names in some CodeGen tests. (Some tests were using function names that also were names of instructions and/or doing other unusual things that were making the test not amenable to otherwise scriptable pattern matching.) No functionality change.
llvm-svn: 186621
2013-07-18 22:29:15 +00:00
Andrew Trick
d09b64fc25 Instruction scheduling itinerary for Intel Atom.
Adds an instruction itinerary to all x86 instructions, giving each a default latency of 1, using the InstrItinClass IIC_DEFAULT.

Sets specific latencies for Atom for the instructions in files X86InstrCMovSetCC.td, X86InstrArithmetic.td, X86InstrControl.td, and X86InstrShiftRotate.td. The Atom latencies for the remainder of the x86 instructions will be set in subsequent patches.

Adds a test to verify that the scheduler is working.

Also changes the scheduling preference to "Hybrid" for i386 Atom, while leaving x86_64 as ILP.

Patch by Preston Gurd!

llvm-svn: 149558
2012-02-01 23:20:51 +00:00
Jakob Stoklund Olesen
85931574b0 Don't clobber pending ST regs when FP regs are killed.
X86FloatingPoint keeps track of pending ST registers for an upcoming
inline asm instruction with fixed stack register constraints.  It does
this by remembering which FP register holds the value that should appear
at a fixed stack position for the inline asm.

When that FP register is killed before the inline asm, make sure to
duplicate it to a scratch register, so the ST register still has a live
FP reference.

This could happen when the same FP register was copied to two ST
registers, or when a spill instruction is inserted between the ST copy
and the inline asm.

This fixes PR10602.

llvm-svn: 137050
2011-08-08 17:15:43 +00:00
Jakob Stoklund Olesen
7d3e1553d2 Clean up the handling of the x87 fp stack to make it more robust.
Drop the FpMov instructions, use plain COPY instead.

Drop the FpSET/GET instruction for accessing fixed stack positions.
Instead use normal COPY to/from ST registers around inline assembly, and
provide a single new FpPOP_RETVAL instruction that can access the return
value(s) from a call. This is still necessary since you cannot tell from
the CALL instruction alone if it returns anything on the FP stack. Teach
fast isel to use this.

This provides a much more robust way of handling fixed stack registers -
we can tolerate arbitrary FP stack instructions inserted around calls
and inline assembly. Live range splitting could sometimes break x87 code
by inserting spill code in unfortunate places.

As a bonus we handle floating point inline assembly correctly now.

llvm-svn: 134018
2011-06-28 18:32:28 +00:00
Jakob Stoklund Olesen
58c34c0e80 Move all inline-asm-fpstack tests to a single file.
Also fix some of the tests that were actually testing wrong behavior -
An input operand in {st} is only popped by the inline asm when {st} is
also in the clobber list.

The original bug reports all had ~{st} clobbers as they should.

llvm-svn: 133916
2011-06-27 17:27:37 +00:00
Jakob Stoklund Olesen
36e769aa7b FileCheckize inline asm FP stack tests
llvm-svn: 108046
2010-07-10 16:30:25 +00:00
Dan Gohman
df2896d609 Eliminate more uses of llvm-as and llvm-dis.
llvm-svn: 81290
2009-09-08 23:54:48 +00:00
Dan Gohman
5f6f8101d5 Split the Add, Sub, and Mul instruction opcodes into separate
integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.

For now, the AsmParser, BitcodeReader, and IRBuilder all preserve
backwards compatability, and the Core LLVM APIs preserve backwards
compatibility for IR producers. Most front-ends won't need to change
immediately.

This implements the first step of the plan outlined here:
http://nondot.org/sabre/LLVMNotes/IntegerOverflow.txt

llvm-svn: 72897
2009-06-04 22:49:04 +00:00
Chris Lattner
fd2c24af72 Implement basic support for the 'f' register class constraint. This basically
works, but probably won't if you mix it with 't' or 'u' yet.

llvm-svn: 48243
2008-03-11 19:50:13 +00:00
Chris Lattner
b6bfedbcfd teach X86InstrInfo::copyRegToReg how to copy into ST(0) from
an RFP register class.

Teach ScheduleDAG how to handle CopyToReg with different src/dst 
reg classes.

This allows us to compile trivial inline asms that expect stuff
on the top of x87-fp stack.

llvm-svn: 48107
2008-03-09 09:15:31 +00:00
Chris Lattner
8d0203478f Add ScheduleDAG support for copytoreg where the src/dst register are
in different register classes, e.g. copy of ST(0) to RFP*.  This gets
some really trivial inline asm working that plops things on the top of
stack (PR879)

llvm-svn: 48105
2008-03-09 08:49:15 +00:00