In commit 700d2417d8281ea56dfd7ac72d1a1473d03d2d59 the CodeExtractor
was updated so that bitcasts that have lifetime markers that beginning
outside of the region are deduplicated outside the region and are not
used as an output. This caused a discrepancy in the IROutliner, where
in these cases there were arguments added to the aggregate function
that were not needed causing assertion errors.
The IROutliner queries the CodeExtractor twice to determine the inputs
and outputs, before and after `findAllocas` is called with the same
ValueSet for the outputs causing the duplication. This has been fixed
with a dummy ValueSet for the first call.
However, the additional bitcasts prevent us from using the same
similarity relationships that were previously defined by the
IR Similarity Analysis Pass. In these cases, we check whether the
initial version of the region being analyzed for outlining is still the
same as it was previously. If it is not, i.e. because of the additional
bitcast instructions from the CodeExtractor, we discard the region.
Reviewers: yroux
Differential Revision: https://reviews.llvm.org/D94303
When combining extracted functions, they may have different function
attributes. We want to make sure that we do not make any assumptions,
or lose any information. This attempts to make sure that we consolidate
function attributes to their most general case.
Tests:
llvm/test/Transforms/IROutliner/outlining-compatible-and-attribute-transfer.ll
llvm/test/Transforms/IROutliner/outlining-compatible-or-attribute-transfer.ll
Reviewers: jdoefert, paquette
Differential Revision: https://reviews.llvm.org/D87301
There are functions that the linker is able to automatically
deduplicate, we do not outline from these functions by default. This
allows for outlining from those functions.
Tests:
llvm/test/Transforms/IROutliner/outlining-odr.ll
Reviewers: jroelofs, paquette
Differential Revision: https://reviews.llvm.org/D87309
Since some values can be swift errors, we need to make sure that we
correctly propagate the parameter attributes.
Tests found at:
llvm/test/Transforms/IROutliner/outlining-swift-error.ll
Reviewers: jroelofs, paquette
Recommit of: 71867ed5e6606a93f0c1413f205afe3bb16317fe
Differential Revision: https://reviews.llvm.org/D87742
This prints OptRemarks at each location where a decision is made to not
outline, or to outline a specific section for the IROutliner pass.
Test:
llvm/test/Transforms/IROutliner/opt-remarks.ll
Reviewers: jroelofs, paquette
Differential Revision: https://reviews.llvm.org/D87300
This adds a cost model that takes into account the total number of
machine instructions to be removed from each region, the number of
instructions added by adding a new function with a set of instructions,
and the instructions added by handling arguments.
Tests not adding flags:
llvm/test/Transforms/IROutliner/outlining-cost-model.ll
Reviewers: jroelofs, paquette
Differential Revision: https://reviews.llvm.org/D87299
Many of the sets of output stores will be the same. When a block is
created, we check if there is an output block with the same set of store
instructions. If there is, we map the output block of the region back
to the block, so that the extra argument controlling the switch
statement can be set to the appropriate block value.
Tests:
- llvm/test/Transforms/IROutliner/outlining-same-output-blocks.ll
Reviewers: jroelofs, paquette
Differential Revision: https://reviews.llvm.org/D87298
Certain regions can have values introduced inside the region that are
used outside of the region. These may not be the same for each similar
region, so we must create one over arching set of arguments for the
consolidated function.
We do this by iterating over the outputs for each extracted function,
and creating as many different arguments to encapsulate the different
outputs sets. For each output set, we create a different block with the
necessary stores from the value to the output register. There is then
one switch statement, controlled by an argument to the function, to
differentiate which block to use.
Changed Tests for consistency:
llvm/test/Transforms/IROutliner/extraction.ll
llvm/test/Transforms/IROutliner/illegal-assumes.ll
llvm/test/Transforms/IROutliner/illegal-memcpy.ll
llvm/test/Transforms/IROutliner/illegal-memmove.ll
llvm/test/Transforms/IROutliner/illegal-vaarg.ll
Tests to test new functionality:
llvm/test/Transforms/IROutliner/outlining-different-output-blocks.ll
llvm/test/Transforms/IROutliner/outlining-remapped-outputs.ll
llvm/test/Transforms/IROutliner/outlining-same-output-blocks.ll
Reviewers: jroelofs, paquette
Differential Revision: https://reviews.llvm.org/D87296
When there are constants that have the same structural location, but not
the same value, between different regions, we cannot simply outline the
region. Instead, we find the constants that are not the same in each
location, and promote them to arguments to be passed into the respective
functions. At each call site, we pass the constant in as an argument
regardless of type.
Added/Edited Tests:
llvm/test/Transforms/IROutliner/outlining-constants-vs-registers.ll
llvm/test/Transforms/IROutliner/outlining-different-constants.ll
llvm/test/Transforms/IROutliner/outlining-different-globals.ll
Reviewers: paquette, jroelofs
Differential Revision: https://reviews.llvm.org/D87294
Extracted regions can have both inputs and outputs. In addition, the
CodeExtractor removes inputs that are only used in llvm.assumes, and
sunken allocas (values are used entirely in the extracted region as
denoted by lifetime intrinsics). We also cannot combine sections that
have different constants in the same structural location, and these
constants will have to elevated to argument. This patch deduplicates
extracted functions that only have inputs and non of the special cases.
We test that correctly deduplicate in:
test/Transforms/IROutliner/outlining-same-globals.ll
test/Transforms/IROutliner/outlining-same-constants.ll
test/Transforms/IROutliner/outlining-different-structure.ll
Reviewers: jroelofs, paquette
Differential Revision: https://reviews.llvm.org/D86978
Extracted regions can have both inputs and outputs. In addition, the
CodeExtractor removes inputs that are only used in llvm.assumes, and
sunken allocas (values are used entirely in the extracted region as
denoted by lifetime intrinsics). We also cannot combine sections that
have different constants in the same structural location, and these
constants will have to elevated to argument. This patch deduplicates
extracted functions that only have inputs and non of the special cases.
We test that correctly deduplicate in:
test/Transforms/IROutliner/outlining-same-globals.ll
test/Transforms/IROutliner/outlining-same-constants.ll
test/Transforms/IROutliner/outlining-different-structure.ll
inputs.
Extracted regions can have both inputs and outputs. In addition, the
CodeExtractor removes inputs that are only used in llvm.assumes, and
sunken allocas (values are used entirely in the extracted region as
denoted by lifetime intrinsics). We also cannot combine sections that
have different constants in the same structural location, and these
constants will have to elevated to argument. This patch limits the
extracted regions to those that only require inputs, and do not have any
other special cases.
We test that we do not outline the wrong constants in:
test/Transforms/IROutliner/outliner-different-constants.ll
test/Transforms/IROutliner/outliner-different-globals.ll
test/Transforms/IROutliner/outliner-constant-vs-registers.ll
We test that correctly outline in:
test/Transforms/IROutliner/outlining-same-globals.ll
test/Transforms/IROutliner/outlining-same-constants.ll
test/Transforms/IROutliner/outlining-different-structure.ll
Reviewers: paquette, plofti
Differential Revision: https://reviews.llvm.org/D86977
This adds a custom InstVisitor to return false on instructions that
should not be allowed to be outlined. These match the illegal
instructions in the IRInstructionMapper with exception of the addition
of the llvm.assume intrinsic.
Tests all the tests marked: illegal-*-.ll with a test for each kind of
instruction that has been marked as illegal.
Reviewers: jroelofs, paquette
Differential Revisions: https://reviews.llvm.org/D86976
Extracting the similar regions is the first step in the IROutliner.
Using the IRSimilarityIdentifier, we collect the SimilarityGroups and
sort them by how many instructions will be removed. Each
IRSimilarityCandidate is used to define an OutlinableRegion. Each
region is ordered by their occurrence in the Module and the regions that
are not compatible with previously outlined regions are discarded.
Each region is then extracted with the CodeExtractor into its own
function.
We test that correctly extract in:
test/Transforms/IROutliner/extraction.ll
test/Transforms/IROutliner/address-taken.ll
test/Transforms/IROutliner/outlining-same-globals.ll
test/Transforms/IROutliner/outlining-same-constants.ll
test/Transforms/IROutliner/outlining-different-structure.ll
Recommit of bf899e891387d07dfd12de195ce2a16f62afd5e0 fixing memory
leaks.
Reviewers: paquette, jroelofs, yroux
Differential Revision: https://reviews.llvm.org/D86975
Reverting commit due to address sanitizer errors.
> Extracting the similar regions is the first step in the IROutliner.
>
> Using the IRSimilarityIdentifier, we collect the SimilarityGroups and
> sort them by how many instructions will be removed. Each
> IRSimilarityCandidate is used to define an OutlinableRegion. Each
> region is ordered by their occurrence in the Module and the regions that
> are not compatible with previously outlined regions are discarded.
>
> Each region is then extracted with the CodeExtractor into its own
> function.
>
> We test that correctly extract in:
> test/Transforms/IROutliner/extraction.ll
> test/Transforms/IROutliner/address-taken.ll
> test/Transforms/IROutliner/outlining-same-globals.ll
> test/Transforms/IROutliner/outlining-same-constants.ll
> test/Transforms/IROutliner/outlining-different-structure.ll
>
> Reviewers: paquette, jroelofs, yroux
>
> Differential Revision: https://reviews.llvm.org/D86975
This reverts commit bf899e891387d07dfd12de195ce2a16f62afd5e0.
Extracting the similar regions is the first step in the IROutliner.
Using the IRSimilarityIdentifier, we collect the SimilarityGroups and
sort them by how many instructions will be removed. Each
IRSimilarityCandidate is used to define an OutlinableRegion. Each
region is ordered by their occurrence in the Module and the regions that
are not compatible with previously outlined regions are discarded.
Each region is then extracted with the CodeExtractor into its own
function.
We test that correctly extract in:
test/Transforms/IROutliner/extraction.ll
test/Transforms/IROutliner/address-taken.ll
test/Transforms/IROutliner/outlining-same-globals.ll
test/Transforms/IROutliner/outlining-same-constants.ll
test/Transforms/IROutliner/outlining-different-structure.ll
Reviewers: paquette, jroelofs, yroux
Differential Revision: https://reviews.llvm.org/D86975
