When building the steps for scalar induction variables, we previously attempted
to determine if all the scalar users of the induction variable were uniform. If
they were, we would only emit the step corresponding to vector lane zero. This
optimization was too aggressive. We generally don't know the entire set of
induction variable users that will be scalar. We have
isScalarAfterVectorization, but this is only a conservative estimate of the
instructions that will be scalarized. Thus, an induction variable may have
scalar users that aren't already known to be scalar. To avoid emitting unused
steps, we can only check that the induction variable is uniform. This should
fix PR30542.
Reference: https://llvm.org/bugs/show_bug.cgi?id=30542
llvm-svn: 282863
(Recommit after making sure IsVerbose gets properly initialized in
DiagnosticInfoOptimizationBase. See previous commit that takes care of
this.)
OptimizationRemarkAnalysis directly takes the role of the report that is
generated by LAA.
Then we need the magic to be able to turn an LAA remark into an LV
remark. This is done via a new OptimizationRemark ctor.
llvm-svn: 282813
OptimizationRemarkAnalysis directly takes the role of the report that is
generated by LAA.
Then we need the magic to be able to turn an LAA remark into an LV
remark. This is done via a new OptimizationRemark ctor.
llvm-svn: 282758
The last one remaining after which emitAnalysis can be removed is when
we convert the LAA's report to a vectorization report. This requires
converting LAA to the new interface first.
llvm-svn: 282726
This patch ensures that we actually scalarize instructions marked scalar after
vectorization. Previously, such instructions may have been vectorized instead.
Differential Revision: https://reviews.llvm.org/D23889
llvm-svn: 282418
If we identify an instruction as uniform after vectorization, we know that we
should only use the value corresponding to the first vector lane of each unroll
iteration. However, when scalarizing such instructions, we still produce values
for the other vector lanes. This patch prevents us from generating the unused
scalars.
Differential Revision: https://reviews.llvm.org/D24275
llvm-svn: 282087
Simplified GEP cloning in vectorizeMemoryInstruction().
Added an assertion that checks consecutive GEP, which should have only one loop-variant operand.
Differential Revision: https://reviews.llvm.org/D24557
llvm-svn: 281851
This patch moves the processing of pointer induction variables in
collectLoopUniforms from the consecutive pointer phase of the analysis to the
phi node phase. Previously, if a pointer induction variable was used by both a
scalarized non-memory instruction as well as a vectorized memory instruction,
we would incorrectly identify the pointer as uniform. Pointer induction
variables should be treated the same as other phi nodes. That is, they are
uniform if all users of the induction variable and induction variable update
are uniform.
Differential Revision: https://reviews.llvm.org/D24511
llvm-svn: 281485
The test case included in r280979 wasn't checking what it was supposed to be
checking for the predicated store case. Fixing the test revealed that the
multi-use case (when a pointer is used by both vectorized and scalarized memory
accesses) wasn't being handled properly. We can't skip over
non-consecutive-like pointers since they may have looked consecutive-like with
a different memory access.
llvm-svn: 280992
Previously, all consecutive pointers were marked uniform after vectorization.
However, if a consecutive pointer is used by a memory access that is eventually
scalarized, the pointer won't remain uniform after all. An example is
predicated stores. Even though a predicated store may be consecutive, it will
still be scalarized, making it's pointer operand non-uniform.
This patch updates the logic in collectLoopUniforms to consider the cases where
a memory access may be scalarized. If a memory access may be scalarized, its
pointer operand is not marked uniform. The determination of whether a given
memory instruction will be scalarized or not has been moved into a common
function that is used by the vectorizer, cost model, and legality analysis.
Differential Revision: https://reviews.llvm.org/D24271
llvm-svn: 280979
Summary:
LSV replaces multiple adjacent loads with one vectorized load and a
bunch of extractelement instructions. This patch makes the
extractelement instructions' names match those of the original loads,
for (hopefully) improved readability.
Reviewers: asbirlea, tstellarAMD
Subscribers: arsenm, mzolotukhin
Differential Revision: https://reviews.llvm.org/D23748
llvm-svn: 280818
Inheriting from std::iterator uses more boiler-plate than manual
typedefs. Avoid that in both ilist_iterator and
MachineInstrBundleIterator.
This has the side effect of removing ilist_iterator from certain ADL
lookups in namespace std; calls to std::next need to be qualified by
"std::" that didn't have to before. The one case of this in-tree was
operating on a temporary, so I used the more compact operator++.
llvm-svn: 280570
For uniform instructions, we're only required to generate a scalar value for
the first vector lane of each unroll iteration. Thus, if we have a reverse
interleaved group, computing the member index off the scalar GEP corresponding
to the last vector lane of its pointer operand technically makes the GEP
non-uniform. We should compute the member index off the first scalar GEP
instead.
I've added the updated member index computation to the existing reverse
interleaved group test.
llvm-svn: 280497
We can now maintain scalar values in VectorLoopValueMap. Thus, we no longer
have to create temporary vectors with insertelement instructions when handling
pointer induction variables. This case was mistakenly missed from r279649 when
refactoring the other scalarization code.
llvm-svn: 280405
This patch moves the allocation of VectorParts for PHI nodes into the actual
PHI widening code. Previously, we allocated these VectorParts in
vectorizeBlockInLoop, and passed them by reference to widenPHIInstruction. Upon
returning, we would then map the VectorParts in VectorLoopValueMap. This
behavior is problematic for the cases where we only want to generate a scalar
version of a PHI node. For example, if in the future we only generate a scalar
version of an induction variable, we would end up inserting an empty vector
entry into the map once we return to vectorizeBlockInLoop. We now no longer
need to pass VectorParts to the various PHI widening functions, and we can keep
VectorParts allocation as close as possible to the point at which they are
actually mapped in VectorLoopValueMap.
llvm-svn: 280390
Passing the types/opcode check still doesn't guarantee we'll actually vectorize.
Therefore, just make it clear we're attempting to vectorize.
llvm-svn: 280263
Summary:
LSV was using two vector sets (heads and tails) to track pairs of adjiacent position to vectorize.
A recent optimization is trying to obtain the longest chain to vectorize and assumes the positions
in heads(H) and tails(T) match, which is not the case is there are multiple tails for the same head.
e.g.:
i1: store a[0]
i2: store a[1]
i3: store a[1]
Leads to:
H: i1
T: i2 i3
Instead of:
H: i1 i1
T: i2 i3
So the positions for instructions that follow i3 will have different indexes in H/T.
This patch resolves PR29148.
This issue also surfaced the fact that if the chain is too long, and TLI
returns a "not-fast" answer, the whole chain will be abandoned for
vectorization, even though a smaller one would be beneficial.
Added a testcase and FIXME for this.
Reviewers: tstellarAMD, arsenm, jlebar
Subscribers: mzolotukhin, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D24057
llvm-svn: 280179
We don't need to limit predication to blocks that have a single incoming
edge, we just need to use the right mask.
This fixes PR30172.
Differential Revision: https://reviews.llvm.org/D24009
llvm-svn: 280148
Reverse iterators to doubly-linked lists can be simpler (and cheaper)
than std::reverse_iterator. Make it so.
In particular, change ilist<T>::reverse_iterator so that it is *never*
invalidated unless the node it references is deleted. This matches the
guarantees of ilist<T>::iterator.
(Note: MachineBasicBlock::iterator is *not* an ilist iterator, but a
MachineInstrBundleIterator<MachineInstr>. This commit does not change
MachineBasicBlock::reverse_iterator, but it does update
MachineBasicBlock::reverse_instr_iterator. See note at end of commit
message for details on bundle iterators.)
Given the list (with the Sentinel showing twice for simplicity):
[Sentinel] <-> A <-> B <-> [Sentinel]
the following is now true:
1. begin() represents A.
2. begin() holds the pointer for A.
3. end() represents [Sentinel].
4. end() holds the poitner for [Sentinel].
5. rbegin() represents B.
6. rbegin() holds the pointer for B.
7. rend() represents [Sentinel].
8. rend() holds the pointer for [Sentinel].
The changes are #6 and #8. Here are some properties from the old
scheme (which used std::reverse_iterator):
- rbegin() held the pointer for [Sentinel] and rend() held the pointer
for A;
- operator*() cost two dereferences instead of one;
- converting from a valid iterator to its valid reverse_iterator
involved a confusing increment; and
- "RI++->erase()" left RI invalid. The unintuitive replacement was
"RI->erase(), RE = end()".
With vector-like data structures these properties are hard to avoid
(since past-the-beginning is not a valid pointer), and don't impose a
real cost (since there's still only one dereference, and all iterators
are invalidated on erase). But with lists, this was a poor design.
Specifically, the following code (which obviously works with normal
iterators) now works with ilist::reverse_iterator as well:
for (auto RI = L.rbegin(), RE = L.rend(); RI != RE;)
fooThatMightRemoveArgFromList(*RI++);
Converting between iterator and reverse_iterator for the same node uses
the getReverse() function.
reverse_iterator iterator::getReverse();
iterator reverse_iterator::getReverse();
Why doesn't iterator <=> reverse_iterator conversion use constructors?
In order to catch and update old code, reverse_iterator does not even
have an explicit conversion from iterator. It wouldn't be safe because
there would be no reasonable way to catch all the bugs from the changed
semantic (see the changes at call sites that are part of this patch).
Old code used this API:
std::reverse_iterator::reverse_iterator(iterator);
iterator std::reverse_iterator::base();
Here's how to update from old code to new (that incorporates the
semantic change), assuming I is an ilist<>::iterator and RI is an
ilist<>::reverse_iterator:
[Old] ==> [New]
reverse_iterator(I) (--I).getReverse()
reverse_iterator(I) ++I.getReverse()
--reverse_iterator(I) I.getReverse()
reverse_iterator(++I) I.getReverse()
RI.base() (--RI).getReverse()
RI.base() ++RI.getReverse()
--RI.base() RI.getReverse()
(++RI).base() RI.getReverse()
delete &*RI, RE = end() delete &*RI++
RI->erase(), RE = end() RI++->erase()
=======================================
Note: bundle iterators are out of scope
=======================================
MachineBasicBlock::iterator, also known as
MachineInstrBundleIterator<MachineInstr>, is a wrapper to represent
MachineInstr bundles. The idea is that each operator++ takes you to the
beginning of the next bundle. Implementing a sane reverse iterator for
this is harder than ilist. Here are the options:
- Use std::reverse_iterator<MBB::i>. Store a handle to the beginning of
the next bundle. A call to operator*() runs a loop (usually
operator--() will be called 1 time, for unbundled instructions).
Increment/decrement just works. This is the status quo.
- Store a handle to the final node in the bundle. A call to operator*()
still runs a loop, but it iterates one time fewer (usually
operator--() will be called 0 times, for unbundled instructions).
Increment/decrement just works.
- Make the ilist_sentinel<MachineInstr> *always* store that it's the
sentinel (instead of just in asserts mode). Then the bundle iterator
can sniff the sentinel bit in operator++().
I initially tried implementing the end() option as part of this commit,
but updating iterator/reverse_iterator conversion call sites was
error-prone. I have a WIP series of patches that implements the final
option.
llvm-svn: 280032
After r279649 when getting a vector value from VectorLoopValueMap, we create an
insertelement sequence on-demand if the value has been scalarized instead of
vectorized. We previously inserted this insertelement sequence before the
value's first vector user. However, this insert location is problematic if that
user is the phi node of a first-order recurrence. With this patch, we move the
insertelement sequence after the last scalar instruction we created when
scalarizing the value. Thus, the value's vector definition in the new loop will
immediately follow its scalar definitions. This should fix PR30183.
Reference: https://llvm.org/bugs/show_bug.cgi?id=30183
llvm-svn: 280001
This patch unifies the data structures we use for mapping instructions from the
original loop to their corresponding instructions in the new loop. Previously,
we maintained two distinct maps for this purpose: WidenMap and ScalarIVMap.
WidenMap maintained the vector values each instruction from the old loop was
represented with, and ScalarIVMap maintained the scalar values each scalarized
induction variable was represented with. With this patch, all values created
for the new loop are maintained in VectorLoopValueMap.
The change allows for several simplifications. Previously, when an instruction
was scalarized, we had to insert the scalar values into vectors in order to
maintain the mapping in WidenMap. Then, if a user of the scalarized value was
also scalar, we had to extract the scalar values from the temporary vector we
created. We now aovid these unnecessary scalar-to-vector-to-scalar conversions.
If a scalarized value is used by a scalar instruction, the scalar value is used
directly. However, if the scalarized value is needed by a vector instruction,
we generate the needed insertelement instructions on-demand.
A common idiom in several locations in the code (including the scalarization
code), is to first get the vector values an instruction from the original loop
maps to, and then extract a particular scalar value. This patch adds
getScalarValue for this purpose along side getVectorValue as an interface into
VectorLoopValueMap. These functions work together to return the requested
values if they're available or to produce them if they're not.
The mapping has also be made less permissive. Entries can be added to
VectorLoopValue map with the new initVector and initScalar functions.
getVectorValue has been modified to return a constant reference to the mapped
entries.
There's no real functional change with this patch; however, in some cases we
will generate slightly different code. For example, instead of an insertelement
sequence following the definition of an instruction, it will now precede the
first use of that instruction. This can be seen in the test case changes.
Differential Revision: https://reviews.llvm.org/D23169
llvm-svn: 279649
div/rem instructions in basic blocks that require predication currently prevent
vectorization. This patch extends the existing mechanism for predicating stores
to handle other instructions and leverages it to predicate divs and rems.
Differential Revision: https://reviews.llvm.org/D22918
llvm-svn: 279620
The test case included with r279125 exposed an existing signed integer
overflow. Since getTreeCost can return INT_MAX, we can't sum this cost together
with other costs, such as getReductionCost.
This patch removes the possibility of assigning a cost of INT_MAX. Since we
were previously using INT_MAX as an indicator for "should not vectorize", we
now explicitly check this condition with "isTreeTinyAndNotFullyVectorizable"
before computing a cost.
This patch adds a run-line to the test case used for r279125 that ensures we
don't vectorize. Previously, this line would vectorize the test case by chance
due to undefined behavior in the cost calculation.
Differential Revision: https://reviews.llvm.org/D23723
llvm-svn: 279562
The test case included in r279125 exposed existing undefined behavior in the
SLP vectorizer that it did not introduce. This patch reapplies the original
patch, but modifies the test case to avoid hitting the undefined behavior. This
allows us to close PR28330 while keeping the UBSan bot happy. The undefined
behavior the original test uncovered will be addressed in a follow-on patch.
Reference: https://llvm.org/bugs/show_bug.cgi?id=28330
llvm-svn: 279370
We abort building vectorizable trees in some cases (e.g., if the maximum
recursion depth is reached, if the region size is too large, etc.). If this
happens for a reduction, we can be left with a root entry that needs to be
gathered. For these cases, we need make sure we actually set VectorizedValue to
the resulting vector.
This patch ensures we properly set VectorizedValue, and it also ensures the
insertelement sequence generated for the gathers is inserted at the correct
location.
Reference: https://llvm.org/bugs/show_bug.cgi?id=28330
Differential Revison: https://reviews.llvm.org/D23410
llvm-svn: 279125
Summary: I later (after r278573) found that LoopIterator.h has some overlapping with LoopBodyTraits. It's good to use LoopBodyTraits because a *Traits struct is algorithm independent.
Reviewers: anemet, nadav, mkuper
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D23529
llvm-svn: 278996
