This should bring signed div/rem analysis up to the same level as unsigned.
We use icmp simplification to determine when the divisor is known greater than the dividend.
Each positive test is followed by a negative test to show that we're not overstepping the boundaries of the known bits.
There are extra tests for the signed-min-value special cases.
Alive proofs:
http://rise4fun.com/Alive/WI5
Differential Revision: https://reviews.llvm.org/D37713
llvm-svn: 313264
The idea to make an 'isDivZero' helper was suggested for the signed case in D37713:
https://reviews.llvm.org/D37713
This clean-up makes it clear that D37713 is just filling the gap for signed div/rem,
removes unnecessary code, and allows us to remove a bit of duplicated code from the
planned improvement in D37713.
llvm-svn: 313261
invalidated SCCs even when we do not have an updated SCC to redirect
towards.
This comes up in a fairly subtle and surprising circumstance: we need to
have a connected but internal node in the call graph which later becomes
a disconnected island, and then gets deleted. All of this needs to
happen mid-CGSCC walk. Because it is disconnected, we have no way of
computing a new "current" SCC when it gets deleted. Instead, we need to
explicitly check for a deleted "current" SCC and bail out of the current
CGSCC step. This will bubble all the way up to the post-order walk and
then resume correctly.
I've included minimal tests for this bug. The specific behavior
matches something we've seen in the wild with the new PM combined with
ThinLTO and sample PGO, but I've not yet confirmed whether this is the
only issue there.
llvm-svn: 313242
This patch fixes pr34283, which exposed that the computation of
maximum legal width for vectorization was wrong, because it relied
on MaxInterleaveFactor to obtain the maximum stride used in the loop,
however not all strided accesses in the loop have an interleave-group
associated with them.
Instead of recording the maximum stride in the loop, which can be over
conservative (e.g. if the access with the maximum stride is not involved
in the dependence limitation), this patch tracks the actual maximum legal
width imposed by accesses that are involved in dependencies.
Differential Revision: https://reviews.llvm.org/D37507
llvm-svn: 313237
Summary:
Full inline cost is computed when -inline-cost-full is true or ORE is
non-null. This patch adds another way to compute full inline cost by
adding a field to InlineParams. This will be used by SampleProfileLoader
to check legality of inlining a callee that it wants to inline.
Reviewers: danielcdh, haicheng
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37819
llvm-svn: 313185
Summary:
Added text options to -pgo-view-counts and -pgo-view-raw-counts that dump block frequency and branch probability info in text.
This is useful when the graph is very large and complex (the dot command crashes, lines/edges too close to tell apart, hard to navigate without textual search) or simply when text is preferred.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37776
llvm-svn: 313159
Summary: References should only be on the aliasee.
Reviewers: pcc
Subscribers: llvm-commits, inglorion
Differential Revision: https://reviews.llvm.org/D37814
llvm-svn: 313158
Summary:
LAA can only emit run-time alias checks for pointers with affine AddRec
SCEV expressions. However, non-AddRecExprs can be now be converted to
affine AddRecExprs using SCEV predicates.
This change tries to add the minimal set of SCEV predicates in order
to enable run-time alias checking.
Reviewers: anemet, mzolotukhin, mkuper, sanjoy, hfinkel
Reviewed By: hfinkel
Subscribers: mssimpso, Ayal, dorit, roman.shirokiy, mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D17080
llvm-svn: 313012
forgetLoop() has pretty bad performance because it goes over
the same instructions over and over again in particular when
nested loop are involved.
The refactoring changes the function to a not-recursive function
and reusing the allocation for data-structures and the Visited
set.
NFCI
Differential Revision: https://reviews.llvm.org/D37659
llvm-svn: 312920
I'm trying to refactor some shared code for integer div/rem,
but I keep having to scroll through fdiv. The FP ops have
nothing in common with the integer ops, so I'm moving FP
below everything else.
While here, improve a couple of comments and fix some formatting.
llvm-svn: 312913
This removes some duplicated code and makes it easier to support signed div/rem
in a similar way if we want to do that. Note that the existing comments were not
accurate - we don't need a constant divisor to simplify; icmp simplification does
more than that. But as the added tests show, it could go even further.
llvm-svn: 312885
It now knows the tricks of both functions.
Also, fix a bug that considered allocas of non-zero address space to be always non null
Differential Revision: https://reviews.llvm.org/D37628
llvm-svn: 312869
This is intended to be a superset of the functionality from D31037 (EarlyCSE) but implemented
as an independent pass, so there's no stretching of scope and feature creep for an existing pass.
I also proposed a weaker version of this for SimplifyCFG in D30910. And I initially had almost
this same functionality as an addition to CGP in the motivating example of PR31028:
https://bugs.llvm.org/show_bug.cgi?id=31028
The advantage of positioning this ahead of SimplifyCFG in the pass pipeline is that it can allow
more flattening. But it needs to be after passes (InstCombine) that could sink a div/rem and
undo the hoisting that is done here.
Decomposing remainder may allow removing some code from the backend (PPC and possibly others).
Differential Revision: https://reviews.llvm.org/D37121
llvm-svn: 312862
Current TargetTransformInfo can support throughput cost model and code size model, but sometimes we also need instruction latency cost model in different optimizations. Hal suggested we need a single public interface to query the different cost of an instruction. So I proposed following interface:
enum TargetCostKind {
TCK_RecipThroughput, ///< Reciprocal throughput.
TCK_Latency, ///< The latency of instruction.
TCK_CodeSize ///< Instruction code size.
};
int getInstructionCost(const Instruction *I, enum TargetCostKind kind) const;
All clients should mainly use this function to query the cost of an instruction, parameter <kind> specifies the desired cost model.
This patch also provides a simple default implementation of getInstructionLatency.
The default getInstructionLatency provides latency numbers for only small number of instruction classes, those latency numbers are only reasonable for modern OOO processors. It can be extended in following ways:
Add more detail into this function.
Add getXXXLatency function and call it from here.
Implement target specific getInstructionLatency function.
Differential Revision: https://reviews.llvm.org/D37170
llvm-svn: 312832
SLP vectorizer supports horizontal reductions for Add/FAdd binary
operations. Patch adds support for horizontal min/max reductions.
Function getReductionCost() is split to getArithmeticReductionCost() for
binary operation reductions and getMinMaxReductionCost() for min/max
reductions.
Patch fixes PR26956.
Differential revision: https://reviews.llvm.org/D27846
llvm-svn: 312791
The current code that handles personality functions when creating a
module summary does not correctly handle the case where a function's
personality function operand refers to the function indirectly
(e.g. via a bitcast). This patch handles such cases by treating
personality function references like any other reference, i.e. by
adding them to the function's reference list. This has the minor side
benefit of allowing personality functions to participate in early
dead stripping.
We do this by calling findRefEdges on the function itself. This way
we also end up handling other function operands (specifically prefix
data and prologue data) for free.
Differential Revision: https://reviews.llvm.org/D37553
llvm-svn: 312698
Remove code that assumed that a nullptr of address space != 0 couldnt alias with a non-null pointer. This is incorrect, since nothing can be concluded about a null pointer in an address space != 0.
This code was written before address spaces were introduced
Differential Revision: https://reviews.llvm.org/D37518
llvm-svn: 312648
This is a preliminary step towards solving the remaining part of PR27145 - IR for isfinite():
https://bugs.llvm.org/show_bug.cgi?id=27145
In order to solve that one more generally, we need to add matching for and/or of fcmp ord/uno
with a constant operand.
But while looking at those patterns, I realized we were missing a canonicalization for nonzero
constants. Rather than limiting to just folds for constants, we're adding a general value
tracking method for this based on an existing DAG helper.
By transforming everything to 0.0, we can simplify the existing code in foldLogicOfFCmps()
and pick up missing vector folds.
Differential Revision: https://reviews.llvm.org/D37427
llvm-svn: 312591
Summary:
When constructing the predicate P1 in ScalarEvolution::createAddRecFromPHIWithCastsImpl() it is possible
for the PHISCEV from which the predicate is constructed to be a SCEVConstant instead of a SCEVAddRec. If
this happens, then the cast<SCEVAddRec>(PHISCEV) in the code will assert.
Such a PHISCEV is possible if either the start value or the accumulator value is a constant value
that not equal to its truncated value, and if the truncated value is zero.
This patch adds tests that demonstrate the cast<> assertion, and fixes this problem by checking
whether the PHISCEV is a constant before constructing the P1 predicate; if it is, then P1 is
equivalent to one of P2 or P3. Additionally, if we know that the start value or accumulator
value are constants then we check whether the P2 and/or P3 predicates are known false at compile
time; if either is, then we bail out of constructing the AddRec.
Reviewers: sanjoy, mkazantsev, silviu.baranga
Reviewed By: mkazantsev
Subscribers: mkazantsev, llvm-commits
Differential Revision: https://reviews.llvm.org/D37265
llvm-svn: 312568
This patch teaches decomposeBitTestICmp to look through truncate instructions on the input to the compare. If a truncate is found it will now return the pre-truncated Value and appropriately extend the APInt mask.
This allows some code to be removed from InstSimplify that was doing this functionality.
This allows InstCombine's bit test combining code to match a pre-truncate Value with the same Value appear with an 'and' on another icmp. Or it allows us to combine a truncate to i16 and a truncate to i8. This also required removing the type check from the beginning of getMaskedTypeForICmpPair, but I believe that's ok because we still have to find two values from the input to each icmp that are equal before we'll do any transformation. So the type check was really just serving as an early out.
There was one user of decomposeBitTestICmp that didn't want to look through truncates, so I've added a flag to prevent that behavior when necessary.
Differential Revision: https://reviews.llvm.org/D37158
llvm-svn: 312382
If a function contains inline asm and the module-level inline asm
contains the definition of a local symbol, prevent the function from
being imported in case the function-level inline asm refers to a
symbol in the module-level inline asm.
Differential Revision: https://reviews.llvm.org/D37370
llvm-svn: 312332
In LLVM IR the following code:
%r = urem <ty> %t, %b
is equivalent to
%q = udiv <ty> %t, %b
%s = mul <ty> nuw %q, %b
%r = sub <ty> nuw %t, %q ; (t / b) * b + (t % b) = t
As UDiv, Mul and Sub are already supported by SCEV, URem can be implemented
with minimal effort using that relation:
%r --> (-%b * (%t /u %b)) + %t
We implement two special cases:
- if %b is 1, the result is always 0
- if %b is a power-of-two, we produce a zext/trunc based expression instead
That is, the following code:
%r = urem i32 %t, 65536
Produces:
%r --> (zext i16 (trunc i32 %a to i16) to i32)
Note that while this helps get a tighter bound on the range analysis and the
known-bits analysis, this exposes some normalization shortcoming of SCEVs:
%div = udim i32 %a, 65536
%mul = mul i32 %div, 65536
%rem = urem i32 %a, 65536
%add = add i32 %mul, %rem
Will usually not be reduced.
llvm-svn: 312329
Summary:
Remove redundant explicit template instantiation.
This was reported by Andrew Kelley building release_50 with gcc7.2.0 on MacOS: duplicate symbol llvm::DominatorTreeBase.
Reviewers: kuhar, andrewrk, davide, hans
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37185
llvm-svn: 311835
Summary:
Add options -print-bfi/-print-bpi that dump block frequency and branch
probability info like -view-block-freq-propagation-dags and
-view-machine-block-freq-propagation-dags do but in text.
This is useful when the graph is very large and complex (the dot command
crashes, lines/edges too close to tell apart, hard to navigate without textual
search) or simply when text is preferred.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37165
llvm-svn: 311822
Change the early exit condition from Cost > Threshold to Cost >= Threshold
because the inline condition is Cost < Threshold.
Differential Revision: https://reviews.llvm.org/D37087
llvm-svn: 311791
Summary: We need to have accurate-sample-profile in function attribute so that it works with LTO.
Reviewers: davidxl, rsmith
Reviewed By: davidxl
Subscribers: sanjoy, mehdi_amini, javed.absar, llvm-commits, eraman
Differential Revision: https://reviews.llvm.org/D37113
llvm-svn: 311706
Summary:
We add the precise cache sizes and associativity for the following Intel
architectures:
- Penry
- Nehalem
- Westmere
- Sandy Bridge
- Ivy Bridge
- Haswell
- Broadwell
- Skylake
- Kabylake
Polly uses since several months a performance model for BLAS computations that
derives optimal cache and register tile sizes from cache and latency
information (based on ideas from "Analytical Modeling Is Enough for High-Performance BLIS", by Tze Meng Low published at TOMS 2016).
While bootstrapping this model, these target values have been kept in Polly.
However, as our implementation is now rather mature, it seems time to teach
LLVM itself about cache sizes.
Interestingly, L1 and L2 cache sizes are pretty constant across
micro-architectures, hence a set of architecture specific default values
seems like a good start. They can be expanded to more target specific values,
in case certain newer architectures require different values. For now a set
of Intel architectures are provided.
Just as a little teaser, for a simple gemm kernel this model allows us to
improve performance from 1.2s to 0.27s. For gemm kernels with less optimal
memory layouts even larger speedups can be reported.
Reviewers: Meinersbur, bollu, singam-sanjay, hfinkel, gareevroman, fhahn, sebpop, efriedma, asb
Reviewed By: fhahn, asb
Subscribers: lsaba, asb, pollydev, llvm-commits
Differential Revision: https://reviews.llvm.org/D37051
llvm-svn: 311647
Current PGO only annotates the edge weight for branch and switch instructions
with profile counts. We should also annotate the indirectbr instruction as
all the information is there. This patch enables the annotating for indirectbr
instructions. Also uses this annotation in branch probability analysis.
Differential Revision: https://reviews.llvm.org/D37074
llvm-svn: 311604
This is PR33245.
Case I am fixing is next:
Imagine we have 2 BC files, one defines and uses personality routine,
second has only declaration and also uses it.
Previously algorithm computing dead symbols (llvm::computeDeadSymbols) did
not know about personality routines and leaved them dead even if function that
has routine was live.
As a result thinLTOInternalizeAndPromoteGUID() method changed binding for
such symbol to local. Later when LLD tried to link these objects it failed
because one object had undefined global symbol for routine and second
object contained local definition instead of global.
Patch set the live root flag on the corresponding FunctionSummary
for personality routines when we build the per-module summaries
during the compile step.
Differential revision: https://reviews.llvm.org/D36834
llvm-svn: 311432
The function does an equality check later to terminate the recursion, but that won't work if its starts out too high. Similar assert already exists in computeKnownBits.
llvm-svn: 311400
Currently, the inline cost model will bail once the inline cost exceeds the
inline threshold in order to avoid unnecessary compile-time. However, when
debugging it is useful to compute the full cost, so this command line option
is added to override the default behavior.
I took over this work from Chad Rosier (mcrosier@codeaurora.org).
Differential Revision: https://reviews.llvm.org/D35850
llvm-svn: 311371
This adds support non-canonical compare predicates. InstSimplify can't rely on canonicalization to have occurred.
Differential Revision: https://reviews.llvm.org/D36646
llvm-svn: 310893
This recommits r310869, with the moved files and no extra changes.
Original commit message:
This addresses a fixme in InstSimplify about using decomposeBitTest. This also fixes InstSimplify to handle ugt and ult compares too.
I've modified the interface a little to return only the APInt version of the mask that InstSimplify needs. InstCombine now has a small wrapper routine to create a Constant out of it. I've also dropped the returning of 0 since InstSimplify doesn't need that. So InstCombine creates a zero constant itself.
I also had to make decomposeBitTest support vectors since InstSimplify needs that.
As InstSimplify can't use something from the Transforms library, I've moved the CmpInstAnalysis code to the Analysis library.
Differential Revision: https://reviews.llvm.org/D36593
llvm-svn: 310889
localized to the code that uses those analyses.
Technically, this can change behavior as we no longer require the
existence of the ProfileSummaryInfo analysis to use local profile
information via BFI. We didn't actually require the PSI to have an
interesting profile though, so this only really impacts the behavior in
non-default pass pipelines.
IMO, this makes it substantially less surprising how everything works --
before an analysis that wasn't actually used had to exist to trigger
*any* profile aware inlining. I think the new organization makes it more
obvious where various checks for profile signals happen.
Differential Revision: https://reviews.llvm.org/D36710
llvm-svn: 310888
Failed to add the two files that moved. And then added an extra change I didn't mean to while trying to fix that. Reverting everything.
llvm-svn: 310873
This addresses a fixme in InstSimplify about using decomposeBitTest. This also fixes InstSimplify to handle ugt and ult compares too.
I've modified the interface a little to return only the APInt version of the mask that InstSimplify needs. InstCombine now has a small wrapper routine to create a Constant out of it. I've also dropped the returning of 0 since InstSimplify doesn't need that. So InstCombine creates a zero constant itself.
I also had to make decomposeBitTest support vectors since InstSimplify needs that.
As InstSimplify can't use something from the Transforms library, I've moved the CmpInstAnalysis code to the Analysis library.
Differential Revision: https://reviews.llvm.org/D36593
llvm-svn: 310869
ValueTracking has to strike a balance when attempting to propagate information
backwards from assumes, because if the information is trivially propagated
backwards, it can appear to LLVM that the assumption is known to be true, and
therefore can be removed.
This is sound (because an assumption has no semantic effect except for causing
UB), but prevents the assume from allowing further optimizations.
The isEphemeralValueOf check exists to try and prevent this issue by not
removing the source of an assumption. This tries to make it a little bit more
general to handle the case of side-effectful instructions, such as in
%0 = call i1 @get_val()
%1 = xor i1 %0, true
call void @llvm.assume(i1 %1)
Patch by Ariel Ben-Yehuda, thanks!
Differential Revision: https://reviews.llvm.org/D36590
llvm-svn: 310859
