Introduced FSELECT node necesary when lowering ISD::SELECT
which has i32, f64, f64 as its operands.
SEL_D instruction required that its output and first operand
of a SELECT node, which it used, have matching types.
MTC1_D64 node introduced to aid FSELECT lowering.
This fixes machine verifier errors on following tests:
CodeGen/Mips/llvm-ir/select-dbl.ll
CodeGen/Mips/llvm-ir/select-flt.ll
CodeGen/Mips/select.ll
Differential Revision: https://reviews.llvm.org/D35408
llvm-svn: 308595
This change introduces additional machine instructions in functions
dealing with the expansion of msa pseudo f16 instructions due to
register classes being inappropriate when checked with machine
verifier.
Differential Revision: https://reviews.llvm.org/D34276
llvm-svn: 308301
For multiprecision arithmetic on MIPS, rather than using ISD::ADDE / ISD::ADDC,
get SelectionDAG to break down the operation into ISD::ADDs and ISD::SETCCs.
For MIPS, only the DSP ASE has a carry flag, so in the general case it is not
useful to directly support ISD::{ADDE, ADDC, SUBE, SUBC} nodes.
Also improve the generation code in such cases for targets with
TargetLoweringBase::ZeroOrOneBooleanContent by directly using the result of the
comparison node rather than using it in selects. Similarly for ISD::SUBE /
ISD::SUBC.
Address optimization breakage by moving the generation of MIPS specific integer
multiply-accumulate nodes to before legalization.
This revolves PR32713 and PR33424.
Thanks to Simonas Kazlauskas and Pirama Arumuga Nainar for reporting the issue!
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D33494
The previous version of this patch was too aggressive in producing fused
integer multiple-addition instructions.
llvm-svn: 307906
Before this change, it was always the first element of a vector that got splatted since the lower 6 bits of vshf.d $wd were always zero for little endian.
Additionally, masking has been performed for vshf via which splat.d is created.
Vshf has a property where if its first operand's elements have either bit 6 or 7 set, destination element is set to zero.
Initially masked with 63 to avoid this property, which would result in generation of and.v + vshf.d in all cases.
Masking with one results in generating a single splati.d instruction when possible.
Differential Revision: https://reviews.llvm.org/D32216
llvm-svn: 306090
For multiprecision arithmetic on MIPS, rather than using ISD::ADDE / ISD::ADDC,
get SelectionDAG to break down the operation into ISD::ADDs and ISD::SETCCs.
For MIPS, only the DSP ASE has a carry flag, so in the general case it is not
useful to directly support ISD::{ADDE, ADDC, SUBE, SUBC} nodes.
Also improve the generation code in such cases for targets with
TargetLoweringBase::ZeroOrOneBooleanContent by directly using the result of the
comparison node rather than using it in selects. Similarly for ISD::SUBE /
ISD::SUBC.
Address optimization breakage by moving the generation of MIPS specific integer
multiply-accumulate nodes to before legalization.
This revolves PR32713 and PR33424.
Thanks to Simonas Kazlauskas and Pirama Arumuga Nainar for reporting the issue!
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D33494
llvm-svn: 305389
Masked vectors which hold shift amounts when creating the following nodes:
ISD::SHL, ISD::SRL or ISD::SRA.
Instructions that use said nodes, which have had their arguments altered are
sll, srl, sra, bneg, bclr and bset.
For said instructions, the shift amount or the bit position that is
specified in the corresponding vector elements will be interpreted as the
shift amount/bit position modulo the size of the element in bits.
The problem lies in compiling with -O2 enabled, where the instructions for
formats .w and .d are not generated, but are instead optimized away.
In this case, having shift amounts that are either negative or greater than
the element bit size results in generation of incorrect results when
constant folding.
We remedy this by masking the operands for the nodes mentioned above before
actually creating them, so that the final result is correct before placed
into the constant pool.
Patch by Stefan Maksimovic.
Differential Revision: https://reviews.llvm.org/D31331
llvm-svn: 300839
We have two cases here, the first one being the following instruction
selection from the builtin function:
bm(n)zi builtin -> vselect node -> bins[lr]i machine instruction
In case of bm(n)zi having an immediate which has either its high or low bits
set, a bins[lr] instruction can be selected through the selectVSplatMask[LR]
function. The function counts the number of bits set, and that value is
being passed to the bins[lr]i instruction as its immediate, which in turn
copies immediate modulo the size of the element in bits plus 1 as per specs,
where we get the off-by-one-error.
The other case is:
bins[lr]i -> vselect node -> bsel.v
In this case, a bsel.v instruction gets selected with a mask having one bit
less set than required.
Patch by Stefan Maksimovic.
Differential Revision: https://reviews.llvm.org/D30579
llvm-svn: 299768
This patch adds support for recognizing more patterns to match to DEXT and
CINS instructions.
It finds cases where multiple instructions could be replaced with a single
DEXT or CINS instruction.
For example, for the following:
define i64 @dext_and32(i64 zeroext %a) {
entry:
%and = and i64 %a, 4294967295
ret i64 %and
}
instead of generating:
0000000000000088 <dext_and32>:
88: 64010001 daddiu at,zero,1
8c: 0001083c dsll32 at,at,0x0
90: 6421ffff daddiu at,at,-1
94: 03e00008 jr ra
98: 00811024 and v0,a0,at
9c: 00000000 nop
the following gets generated:
0000000000000068 <dext_and32>:
68: 03e00008 jr ra
6c: 7c82f803 dext v0,a0,0x0,0x20
Cases that are covered:
DEXT:
1. and $src, mask where mask > 0xffff
2. zext $src zero extend from i32 to i64
CINS:
1. and (shl $src, pos), mask
2. shl (and $src, mask), pos
3. zext (shl $src, pos) zero extend from i32 to i64
Patch by Violeta Vukobrat.
Differential Revision: https://reviews.llvm.org/D30464
llvm-svn: 297832
This patches teaches the MIPS backend to accept more values for constant
splats. Previously, only 10 bit signed immediates or values that could be
loaded using an ldi.[bhwd] instruction would be acceptted. This patch relaxes
that constraint so that any constant value that be splatted is accepted.
As a result, the constant pool is used less for vector operations, and the
suite of bit manipulation instructions b(clr|set|neg)i can now be used with
the full range of their immediate operand.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D30640
llvm-svn: 297457
Rename from addOperand to just add, to match the other method that has been
added to MachineInstrBuilder for adding more than just 1 operand.
See https://reviews.llvm.org/D28057 for the whole discussion.
Differential Revision: https://reviews.llvm.org/D28556
llvm-svn: 291891
The usage of some MIPS MSA instrinsics that took immediates could crash LLVM
during lowering. This patch addresses that behaviour. Crucially this patch
also makes the use of intrinsics with out of range immediates as producing an
internal error.
The ld,st instrinsics would trigger an assertion failure for MIPS64 as their
lowering would attempt to add an i32 offset to a i64 pointer.
Reviewers: vkalintiris, slthakur
Differential Revision: https://reviews.llvm.org/D25438
llvm-svn: 291571
Previous the lowering of FILL_FW would use the MSA128W register class when
performing a vector splat. Instead it should be honouring -mno-odd-spreg and
only use the even registers when performing a splat from word to vector
register.
Logical follow-on from r230235.
This fixes PR/31369.
A previous commit was missing the test case and had another differential
in it.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D28373
llvm-svn: 291566
Previous the lowering of FILL_FW would use the MSA128W register class when
performing a vector splat. Instead it should be honouring -mno-odd-spreg and
only use the even registers when performing a splat from word to vector
register.
Logical follow-on from r230235.
This fixes PR/31369.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D28373
llvm-svn: 291556
The MIPS MSA ASE provides instructions to convert to and from half precision
floating point. This patch teaches the MIPS backend to treat f16 as a legal
type and how to promote such values to f32 for the usual set of operations.
As a result of this, the fexup[lr].w intrinsics no longer crash LLVM during
type legalization.
Reviewers: zoran.jovanvoic, vkalintiris
Differential Revision: https://reviews.llvm.org/D26398
llvm-svn: 287349
Disable tail calls while the remaining bugs are fixed. Enable only for tests.
Reviewers: vkalintiris
Differential Review: https://reviews.llvm.org/D24912
llvm-svn: 282487
Enable tail calls by default for (micro)MIPS(64).
microMIPS is slightly more tricky than doing it for MIPS(R6) or microMIPSR6.
microMIPS has two instruction encodings: 16bit and 32bit along with some
restrictions on the size of the instruction that can fill the delay slot.
For safe tail calls for microMIPS, the delay slot filler attempts to find
a correct size instruction for the delay slot of TAILCALL pseudos.
Reviewers: dsanders, vkalintris
Subscribers: jfb, dsanders, sdardis, llvm-commits
Differential Revision: https://reviews.llvm.org/D21138
llvm-svn: 277708
Summary:
Instead, we take a single flags arg (a bitset).
Also add a default 0 alignment, and change the order of arguments so the
alignment comes before the flags.
This greatly simplifies many callsites, and fixes a bug in
AMDGPUISelLowering, wherein the order of the args to getLoad was
inverted. It also greatly simplifies the process of adding another flag
to getLoad.
Reviewers: chandlerc, tstellarAMD
Subscribers: jholewinski, arsenm, jyknight, dsanders, nemanjai, llvm-commits
Differential Revision: http://reviews.llvm.org/D22249
llvm-svn: 275592
This is a mechanical change to make TargetLowering API take MachineInstr&
(instead of MachineInstr*), since the argument is expected to be a valid
MachineInstr. In one case, changed a parameter from MachineInstr* to
MachineBasicBlock::iterator, since it was used as an insertion point.
As a side effect, this removes a bunch of MachineInstr* to
MachineBasicBlock::iterator implicit conversions, a necessary step
toward fixing PR26753.
llvm-svn: 274287
This used to be free, copying and moving DebugLocs became expensive
after the metadata rewrite. Passing by reference eliminates a ton of
track/untrack operations. No functionality change intended.
llvm-svn: 272512
This reverts commit r262316.
It seems that my change breaks an out-of-tree chromium buildbot, so
I'm reverting this in order to investigate the situation further.
llvm-svn: 262387
Summary:
This patch modifies the existing comparison, branch, conditional-move
and select patterns, and adds new ones where needed. Also, the updated
SLT{u,i,iu} set of instructions generate a GPR width result.
The majority of the code changes in the Mips back-end fix the wrong
assumption that the result of SETCC nodes always produce an i32 value.
The changes in the common code path account for the fact that in 64-bit
MIPS targets, i1 is promoted to i32 instead of i64.
Reviewers: dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D10970
llvm-svn: 262316
Summary:
This patch adds support for using the "interrupt" attribute on Mips
for interrupt handling functions. At this time only mips32r2+ with the
o32 ABI with the static relocation model is supported. Unsupported
configurations will be rejected
Patch by Simon Dardis (+ clang-format & some trivial changes to follow the
LLVM coding standards by me).
Reviewers: mpf, dsanders
Subscribers: dsanders, vkalintiris, llvm-commits
Differential Revision: http://reviews.llvm.org/D10768
llvm-svn: 251286
After D10403, we had FMF in the DAG but disabled by default. Nick reported no crashing errors after some stress testing,
so I enabled them at r243687. However, Escha soon notified us of a bug not covered by any in-tree regression tests:
if we don't propagate the flags, we may fail to CSE DAG nodes because differing FMF causes them to not match. There is
one test case in this patch to prove that point.
This patch hopes to fix or leave a 'TODO' for all of the in-tree places where we create nodes that are FMF-capable. I
did this by putting an assert in SelectionDAG.getNode() to find any FMF-capable node that was being created without FMF
( D11807 ). I then ran all regression tests and test-suite and confirmed that everything passes.
This patch exposes remaining work to get DAG FMF to be fully functional: (1) add the flags to non-binary nodes such as
FCMP, FMA and FNEG; (2) add the flags to intrinsics; (3) use the flags as conditions for transforms rather than the
current global settings.
Differential Revision: http://reviews.llvm.org/D12095
llvm-svn: 247815
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11037
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241776
Summary:
The documentation writes vectors highest-index first whereas LLVM-IR writes
them lowest-index first. As a result, instructions defined in terms of
left_half() and right_half() had the halves reversed.
In addition to correcting them, they have been improved to allow shuffles
that use the same operand twice or in reverse order. For example, ilvev
used to accept masks of the form:
<0, n, 2, n+2, 4, n+4, ...>
but now accepts:
<0, 0, 2, 2, 4, 4, ...>
<n, n, n+2, n+2, n+4, n+4, ...>
<0, n, 2, n+2, 4, n+4, ...>
<n, 0, n+2, 2, n+4, 4, ...>
One further improvement is that splati.[bhwd] is now the preferred instruction
for splat-like operations. The other special shuffles are no longer used
for splats. This lead to the discovery that <0, 0, ...> would not cause
splati.[hwd] to be selected and this has also been fixed.
This fixes the enc-3des test from the test-suite on Mips64r6 with MSA.
Reviewers: vkalintiris
Reviewed By: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9660
llvm-svn: 237689
Summary:
When using the N64 ABI, element-indices use the i64 type instead of i32.
In many cases, we can use iPTR to account for this but additional patterns
and pseudo's are also required.
This fixes most (but not quite all) failures in the test-suite when using
N64 and MSA together.
Reviewers: vkalintiris
Reviewed By: vkalintiris
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D9342
llvm-svn: 236494
[DebugInfo] Add debug locations to constant SD nodes
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
llvm-svn: 235989
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
llvm-svn: 235977
This required plumbing a TargetRegisterInfo through computeRegisterProperties
and into findRepresentativeClass which uses it for register class
iteration. This required passing a subtarget into a few target specific
initializations of TargetLowering.
llvm-svn: 230583
Summary:
-mno-odd-spreg prohibits the use of odd-numbered single-precision floating
point registers. However, vector insert/extract was still using them when
manipulating the subregisters of an MSA register. Fixed this by ensuring
that insertion/extraction is only performed on even-numbered vector
registers when -mno-odd-spreg is given.
Reviewers: vmedic, sstankovic
Reviewed By: sstankovic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7672
llvm-svn: 230235
calls that don't take a Function argument from Mips. Notable
exceptions: the AsmPrinter and MipsTargetObjectFile. The
latter needs to be fixed, and the former will be fixed when the
general AsmPrinter changes happen.
llvm-svn: 227512
Summary:
This patch adds support for some operations that were missing from
128-bit integer types (add/sub/mul/sdiv/udiv... etc.). With these
changes we can support the __int128_t and __uint128_t data types
from C/C++.
Depends on D7125
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7143
llvm-svn: 227089
