Add a profitability heuristic to enable runtime unrolling of multi-exit
loop: There can be atmost two unique exit blocks for the loop and the
second exit block should be a deoptimizing block. Also, there can be one
other exiting block other than the latch exiting block. The reason for
the latter is so that we limit the number of branches in the unrolled
code to being at most the unroll factor. Deoptimizing blocks are rarely
taken so these additional number of branches created due to the
unrolling are predictable, since one of their target is the deopt block.
Reviewers: apilipenko, reames, evstupac, mkuper
Subscribers: llvm-commits
Reviewed by: reames
Differential Revision: https://reviews.llvm.org/D35380
llvm-svn: 313363
During runtime unrolling on loops with multiple exits, we update the
exit blocks with the correct phi values from both original and remainder
loop.
In this process, we lookup the VMap for the mapped incoming phi values,
but did not update the VMap if a default entry was generated in the VMap
during the lookup. This default value is generated when constants or
values outside the current loop are looked up.
This patch fixes the assertion failure when null entries are present in
the VMap because of this lookup. Added a testcase that showcases the
problem.
llvm-svn: 313358
Patch tries to improve vectorization of the following code:
void add1(int * __restrict dst, const int * __restrict src) {
*dst++ = *src++;
*dst++ = *src++ + 1;
*dst++ = *src++ + 2;
*dst++ = *src++ + 3;
}
Allows to vectorize even if the very first operation is not a binary add, but just a load.
Reviewers: spatel, mzolotukhin, mkuper, hfinkel, RKSimon, filcab, ABataev, davide
Subscribers: llvm-commits, RKSimon
Differential Revision: https://reviews.llvm.org/D28907
llvm-svn: 313348
Summary: Move to LoopUtils method that collects all children of a node inside a loop.
Reviewers: majnemer, sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37870
llvm-svn: 313322
Summary: SampleProfileLoader inlines hot functions if it is inlined in the profiled binary. However, the inline needs to be guarded by legality check, otherwise it could lead to correctness issues.
Reviewers: eraman, davidxl
Reviewed By: eraman
Subscribers: vitalybuka, sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D37779
llvm-svn: 313277
This patch fixes pr34283, which exposed that the computation of
maximum legal width for vectorization was wrong, because it relied
on MaxInterleaveFactor to obtain the maximum stride used in the loop,
however not all strided accesses in the loop have an interleave-group
associated with them.
Instead of recording the maximum stride in the loop, which can be over
conservative (e.g. if the access with the maximum stride is not involved
in the dependence limitation), this patch tracks the actual maximum legal
width imposed by accesses that are involved in dependencies.
Differential Revision: https://reviews.llvm.org/D37507
llvm-svn: 313237
This reland includes a fix for the LowerTypeTests pass so that it
looks past aliases when determining which type identifiers are live.
Differential Revision: https://reviews.llvm.org/D37842
llvm-svn: 313229
This broke Chromium's CFI build; see crbug.com/765004.
> We were previously handling aliases during dead stripping by adding
> the aliased global's "original name" GUID to the worklist. This will
> lead to incorrect behaviour if the global has local linkage because
> the original name GUID will not correspond to the global's GUID in
> the summary.
>
> Because an alias is just another name for the global that it
> references, there is no need to mark the referenced global as used,
> or to follow references from any other copies of the global. So all
> we need to do is to follow references from the aliasee's summary
> instead of the alias.
>
> Differential Revision: https://reviews.llvm.org/D37789
llvm-svn: 313222
Summary: SampleProfileLoader inlines hot functions if it is inlined in the profiled binary. However, the inline needs to be guarded by legality check, otherwise it could lead to correctness issues.
Reviewers: eraman, davidxl
Reviewed By: eraman
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D37779
llvm-svn: 313195
These are changes to reduce redundant computations when calculating a
feasible vectorization factor:
1. early return when target has no vector registers
2. don't compute register usage for the default VF.
Suggested during review for D37702.
llvm-svn: 313176
Summary:
Added text options to -pgo-view-counts and -pgo-view-raw-counts that dump block frequency and branch probability info in text.
This is useful when the graph is very large and complex (the dot command crashes, lines/edges too close to tell apart, hard to navigate without textual search) or simply when text is preferred.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37776
llvm-svn: 313159
We were previously handling aliases during dead stripping by adding
the aliased global's "original name" GUID to the worklist. This will
lead to incorrect behaviour if the global has local linkage because
the original name GUID will not correspond to the global's GUID in
the summary.
Because an alias is just another name for the global that it
references, there is no need to mark the referenced global as used,
or to follow references from any other copies of the global. So all
we need to do is to follow references from the aliasee's summary
instead of the alias.
Differential Revision: https://reviews.llvm.org/D37789
llvm-svn: 313157
Summary:
SamplePGO indirect call profiles record the target as the original GUID
for statics. The importer had special handling to map to the normal GUID
in that case. The dead global analysis needs the same treatment or
inconsistencies arise, resulting in linker unsats due to some dead
symbols being exported and kept, leaving in references to other dead
symbols that are removed.
This can happen when a SamplePGO profile collected by one binary is used
for a different binary, so the indirect call profiles may not accurately
reflect live targets.
Reviewers: danielcdh
Subscribers: mehdi_amini, inglorion, llvm-commits, eraman
Differential Revision: https://reviews.llvm.org/D37783
llvm-svn: 313151
When converting a PHI into a series of 'select' instructions to combine the
incoming values together according their edge masks, initialize the first
value to the incoming value In0 of the first predecessor, instead of
generating a redundant assignment 'select(Cond[0], In0, In0)'. The latter
fails when the Cond[0] mask is null, representing a full mask, which can
happen only when there's a single incoming value.
No functional changes intended nor expected other than surviving null Cond[0]'s.
This fix follows D35725, which introduced using null to represent full masks.
Differential Revision: https://reviews.llvm.org/D37619
llvm-svn: 313119
Factor out the reachability such that multiple queries to find reachability of values are fast. This is based on finding
the ANTIC points
in the CFG which do not change during hoisting. The ANTIC points are basically the dominance-frontiers in the inverse
graph. So we introduce a data structure (CHI nodes)
to keep track of values flowing out of a basic block. We only do this for values with multiple occurrences in the
function as they are the potential hoistable candidates.
This patch allows us to hoist instructions to a basic block with >2 successors, as well as deal with infinite loops in a
trivial way.
Relevant test cases are added to show the functionality as well as regression fixes from PR32821.
Regression from previous GVNHoist:
We do not hoist fully redundant expressions because fully redundant expressions are already handled by NewGVN
Differential Revision: https://reviews.llvm.org/D35918
Reviewers: dberlin, sebpop, gberry,
llvm-svn: 313116
Summary:
This should improve optimized debug info for address-taken variables at
the cost of inaccurate debug info in some situations.
We patched this into clang and deployed this change to Chromium
developers, and this significantly improved debuggability of optimized
code. The long-term solution to PR34136 seems more and more like it's
going to take a while, so I would like to commit this change under a
flag so that it can be used as a stop-gap measure.
This flag should really help so for C++ aggregates like std::string and
std::vector, which are typically address-taken, even after inlining, and
cannot be SROA-ed.
Reviewers: aprantl, dblaikie, probinson, dberlin
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D36596
llvm-svn: 313108
Summary: This change passes down ACT to SampleProfileLoader for the new PM. Also remove the default value for SampleProfileLoader class as it is not used.
Reviewers: eraman, davidxl
Reviewed By: eraman
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D37773
llvm-svn: 313080
Summary:
The current promoteLoopAccessesToScalars method receives an AliasSet, but
the information used is in fact a list of Value*, known to must alias.
Create the list ahead of time to make this method independent of the AliasSet class.
While there is no functionality change, this adds overhead for creating
a set of Value*, when promotion would normally exit earlier.
This is meant to be as a first refactoring step in order to start replacing
AliasSetTracker with MemorySSA.
And while the end goal is to redesign LICM, the first few steps will focus on
adding MemorySSA as an alternative to the AliasSetTracker using most of the
existing functionality.
Reviewers: mkuper, danielcdh, dberlin
Subscribers: sanjoy, chandlerc, gberry, davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D35439
llvm-svn: 313075
Summary:
When the MaxVectorSize > ConstantTripCount, we should just clamp the
vectorization factor to be the ConstantTripCount.
This vectorizes loops where the TinyTripCountThreshold >= TripCount < MaxVF.
Earlier we were finding the maximum vector width, which could be greater than
the trip count itself. The Loop vectorizer does all the work for generating a
vectorizable loop, but in the end we would always choose the scalar loop (since
the VF > trip count). This allows us to choose the VF keeping in mind the trip
count if available.
This is a fix on top of rL312472.
Reviewers: Ayal, zvi, hfinkel, dneilson
Reviewed by: Ayal
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37702
llvm-svn: 313046
Not all targets support the use of absolute symbols to export
constants. In particular, ARM has a wide variety of constant encodings
that cannot currently be relocated by linkers. So instead of exporting
the constants using symbols, export them directly in the summary.
The values of the constants are left as zeroes on targets that support
symbolic exports.
This may result in more cache misses when targeting those architectures
as a result of arbitrary changes in constant values, but this seems
somewhat unavoidable for now.
Differential Revision: https://reviews.llvm.org/D37407
llvm-svn: 312967
It now knows the tricks of both functions.
Also, fix a bug that considered allocas of non-zero address space to be always non null
Differential Revision: https://reviews.llvm.org/D37628
llvm-svn: 312869
This is intended to be a superset of the functionality from D31037 (EarlyCSE) but implemented
as an independent pass, so there's no stretching of scope and feature creep for an existing pass.
I also proposed a weaker version of this for SimplifyCFG in D30910. And I initially had almost
this same functionality as an addition to CGP in the motivating example of PR31028:
https://bugs.llvm.org/show_bug.cgi?id=31028
The advantage of positioning this ahead of SimplifyCFG in the pass pipeline is that it can allow
more flattening. But it needs to be after passes (InstCombine) that could sink a div/rem and
undo the hoisting that is done here.
Decomposing remainder may allow removing some code from the backend (PPC and possibly others).
Differential Revision: https://reviews.llvm.org/D37121
llvm-svn: 312862
SLP vectorizer supports horizontal reductions for Add/FAdd binary
operations. Patch adds support for horizontal min/max reductions.
Function getReductionCost() is split to getArithmeticReductionCost() for
binary operation reductions and getMinMaxReductionCost() for min/max
reductions.
Patch fixes PR26956.
Differential revision: https://reviews.llvm.org/D27846
llvm-svn: 312791
This is required when targeting COFF, as the comdat name must match
one of the names of the symbols in the comdat.
Differential Revision: https://reviews.llvm.org/D37550
llvm-svn: 312767
r312318 - Debug info for variables whose type is shrinked to bool
r312325, r312424, r312489 - Test case for r312318
Revision 312318 introduced a null dereference bug.
Details in https://bugs.llvm.org/show_bug.cgi?id=34490
llvm-svn: 312758
Consider this type of a loop:
for (...) {
...
if (...) continue;
...
}
Normally, the "continue" would branch to the loop control code that
checks whether the loop should continue iterating and which contains
the (often) unique loop latch branch. In certain cases jump threading
can "thread" the inner branch directly to the loop header, creating
a second loop latch. Loop canonicalization would then transform this
loop into a loop nest. The problem with this is that in such a loop
nest neither loop is countable even if the original loop was. This
may inhibit subsequent loop optimizations and be detrimental to
performance.
Differential Revision: https://reviews.llvm.org/D36404
llvm-svn: 312664
This is a preliminary step towards solving the remaining part of PR27145 - IR for isfinite():
https://bugs.llvm.org/show_bug.cgi?id=27145
In order to solve that one more generally, we need to add matching for and/or of fcmp ord/uno
with a constant operand.
But while looking at those patterns, I realized we were missing a canonicalization for nonzero
constants. Rather than limiting to just folds for constants, we're adding a general value
tracking method for this based on an existing DAG helper.
By transforming everything to 0.0, we can simplify the existing code in foldLogicOfFCmps()
and pick up missing vector folds.
Differential Revision: https://reviews.llvm.org/D37427
llvm-svn: 312591
Instead of creating a Constant and then calling m_APInt with it (which will always return true). Just create an APInt initially, and use that for the checks in isSelect01 function. If it turns out we do need the Constant, create it from the APInt.
This is a refactor for a future patch that will do some more checks of the constant values here.
llvm-svn: 312517
Summary:
Improve how MaxVF is computed while taking into account that MaxVF should not be larger than the loop's trip count.
Other than saving on compile-time by pruning the possible MaxVF candidates, this patch fixes pr34438 which exposed the following flow:
1. Short trip count identified -> Don't bail out, set OptForSize:=True to avoid tail-loop and runtime checks.
2. Compute MaxVF returned 16 on a target supporting AVX512.
3. OptForSize -> choose VF:=MaxVF.
4. Bail out because TripCount = 8, VF = 16, TripCount % VF !=0 means we need a tail loop.
With this patch step 2. will choose MaxVF=8 based on TripCount.
Reviewers: Ayal, dorit, mkuper, hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, llvm-commits
Differential Revision: https://reviews.llvm.org/D37425
llvm-svn: 312472
