There is no need to schedule insertelement instructions. The compiler
did not schedule them before it started support their vectorization and
it should not do it after. We pre-schedule them manually when finding
a build vector sequence.
Disabling scheduling of insertelement instructions improves compile
time and vectorization of the very large basic blocks by saving
scheduling budget for other instructions.
Differential Revision: https://reviews.llvm.org/D104026
1. Better sorting of scalars to be gathered. Trying to insert
constants/arguments/instructions-out-of-loop at first and only then
the instructions which are inside the loop. It improves hoisting of
invariant insertelements instructions.
2. Better detection of shuffle candidates in gathering function.
3. The cost of insertelement for constants is 0.
Part of D57059.
Differential Revision: https://reviews.llvm.org/D103458
No need to recalculate the cost of extractelements, just no need to
compensate the cost of all extractelements, need to check before if this
is actually going to be removed at the vectorization. Also, no need to
generate new extractelement instruction, we may just regenerate the
original one. It may improve the final vectorization.
Differential Revision: https://reviews.llvm.org/D102933
tryToVectorizeList function allows to reorder only 2 scalars. Patch
allows to reorder >2 scalars. Also, to avoid possible regressions, it
allows extra vectorization of the remaining parts of the scalars
elements if possible.
Part of D57059.
Differential Revision: https://reviews.llvm.org/D103247
As noticed by NAKAMURA Takumi back in 2017, we cannot use
properlyDominates for std::stable_sort as properlyDominates only
partially orders blocks. That is, for blocks A, B, C, D, where A
dominates B and C dominates D, we have A == C, B == C, but A < B. This
is not a valid comparison function for std::stable_sort and causes
different results between libstdc++ and libc++. This change uses DFS
numbering to give deterministic results for all reachable blocks.
Unreachable blocks are ignored already, so do not need special
consideration.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D103441
As the existing test unreachable.ll shows, we should be doing more
work to avoid entering unreachable blocks: we should not stop
vectorization just because a PHI incoming value from an unreachable
block cannot be vectorized. We know that particular value will never
be used so we can just replace it with poison.
Implemented better scheme for perfect/shuffled matches of the gather
nodes which allows to fix the performance regressions introduced by
earlier patches. Starting detecting matches for broadcast nodes and
extractelement gathering.
Differential Revision: https://reviews.llvm.org/D102920
SLP vectorizer should not consider in sertelements with multiple uses as
a part of high level build vector, it must be considered as
a terminating insertelement in the vector build, otherwise it may
produce incorrect code.
Differential Revision: https://reviews.llvm.org/D103164
External insertelement users can be represented as a result of shuffle
of the vectorized element and noconsecutive insertlements too. Added
support for handling non-consecutive insertelements.
Differential Revision: https://reviews.llvm.org/D101555
If we gather extract elements and they actually are just shuffles, it
might be profitable to vectorize them even if the tree is tiny.
Differential Revision: https://reviews.llvm.org/D101460
Currently all AA analyses marked as preserved are stateless, not taking
into account their dependent analyses. So there's no need to mark them
as preserved, they won't be invalidated unless their analyses are.
SCEVAAResults was the one exception to this, it was treated like a
typical analysis result. Make it like the others and don't invalidate
unless SCEV is invalidated.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D102032
Add new type of tree node for `InsertElementInst` chain forming vector.
These instructions could be either removed, or replaced by shuffles during
vectorization and we can add this node to cost model, so naturally estimating
their cost, getting rid of `CompensateCost` tricks and reducing further work
for InstCombine. This fixes PR40522 and PR35732 in a natural way. Also this
patch is the first step towards revectorization of partially vectorization
(to fix PR42022 completely). After adding inserts to tree the next step is
to add vector instructions there (for instance, to merge `store <2 x float>`
and `store <2 x float>` to `store <4 x float>`).
Fixes PR40522 and PR35732.
Differential Revision: https://reviews.llvm.org/D98714
The test example from https://llvm.org/PR50256 (and reduced here)
shows that we can match a load combine candidate even when there
are no "or" instructions. We can avoid that by confirming that we
do see an "or". This doesn't apply when matching an or-reduction
because that match begins from the operands of the reduction.
Differential Revision: https://reviews.llvm.org/D102074
Need to remove the old code for avoiding double counting of the gather
nodes with perfect diamond matches within the tree after we started
detecting perfect/shuffled matching in the previous patch D100495. We
may skip the cost for such nodes completely.
Differential Revision: https://reviews.llvm.org/D102023
This reverts commit fd18547e0721983dcb273670d16341921f831e50. Need to
add a check for the size of the vectorization tree to avoid some extra
vectorization.
Need to check if target allows/supports masked gathers before trying to
estimate its cost, otherwise we may fail to vectorize some of the
patterns because of too pessimistic cost model.
Part of D57059.
Differential Revision: https://reviews.llvm.org/D101297
Need to check if target allows/supports masked gathers before trying to
estimate its cost, otherwise we may fail to vectorize some of the
patterns because of too pessimistic cost model.
Part of D57059.
Differential Revision: https://reviews.llvm.org/D101297
If the extracts from the non-power-2 vectors are recognized as shuffles,
need some extra checks to not crash cost calculations if trying to gext
the ecost for subvector extracts. In this case need to check carefully
that we do not exit out of bounds of the original vector, otherwise the
TTI's cost model will crash on assert.
Differential Revision: https://reviews.llvm.org/D101477
Added an extra analysis for better choosing of shuffle kind in
getShuffleCost functions for better cost estimation if mask was
provided.
Differential Revision: https://reviews.llvm.org/D100865
Added an extra analysis for better choosing of shuffle kind in
getShuffleCost functions for better cost estimation if mask was
provided.
Differential Revision: https://reviews.llvm.org/D100865
If the first tree element is vectorize and the second is gather, it
still might be profitable to vectorize it if the gather node contains
less scalars to vectorize than the original tree node. It might be
profitable to use shuffles.
Differential Revision: https://reviews.llvm.org/D101397
We can skip check for undefs trying to find perfect/shuffled tree
entries matching, they can be ignored completely improving the final
cost/vectorization results.
Differential Revision: https://reviews.llvm.org/D101061
1. No need to call `areAllUsersVectorized` as later the cost is
calculated only if the instruction has one use and gets vectorized.
2. Need to calculate the cost of the dead extractelement more precisely,
taking the vector type of the vector operand, not the resulting
vector type.
Part of D57059.
Differential Revision: https://reviews.llvm.org/D99980
SLP supports perfect diamond matching for the vectorized tree entries
but do not support it for gathered entries and does not support
non-perfect (shuffled) matching with 1 or 2 tree entries. Patch adds
support for this matching to improve cost of the vectorized tree.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D100495
SLP supports perfect diamond matching for the vectorized tree entries
but do not support it for gathered entries and does not support
non-perfect (shuffled) matching with 1 or 2 tree entries. Patch adds
support for this matching to improve cost of the vectorized tree.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D100495
SLP supports perfect diamond matching for the vectorized tree entries
but do not support it for gathered entries and does not support
non-perfect (shuffled) matching with 1 or 2 tree entries. Patch adds
support for this matching to improve cost of the vectorized tree.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D100495
SLP supports perfect diamond matching for the vectorized tree entries
but do not support it for gathered entries and does not support
non-perfect (shuffled) matching with 1 or 2 tree entries. Patch adds
support for this matching to improve cost of the vectorized tree.
Differential Revision: https://reviews.llvm.org/D100495
Only attempt to propagateIRFlags if we have both SelectInst - afaict we shouldn't have matched a min/max reduction without both SelectInst, but static analyzer doesn't know that.
Main reason is preparation to transform AliasResult to class that contains
offset for PartialAlias case.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D98027
No need to lookup through and/or try to vectorize operands of the
CmpInst instructions during attempts to find/vectorize min/max
reductions. Compiler implements postanalysis of the CmpInsts so we can
skip extra attempts in tryToVectorizeHorReductionOrInstOperands and save
compile time.
Differential Revision: https://reviews.llvm.org/D99950
During vectorization better to postpone the vectorization of the CmpInst
instructions till the end of the basic block. Otherwise we may vectorize
it too early and may miss some vectorization patterns, like reductions.
Reworked part of D57059
Differential Revision: https://reviews.llvm.org/D99796
The ultimate reduction node may have multiple uses, but if the ultimate
reduction is min/max reduction and based on SelectInstruction, the
condition of this select instruction must have only single use.
Differential Revision: https://reviews.llvm.org/D99753
The motivation for this patch is to better estimate the cost of
extracelement instructions in cases were they are going to be free,
because the source vector can be used directly.
A simple example is
%v1.lane.0 = extractelement <2 x double> %v.1, i32 0
%v1.lane.1 = extractelement <2 x double> %v.1, i32 1
%a.lane.0 = fmul double %v1.lane.0, %x
%a.lane.1 = fmul double %v1.lane.1, %y
Currently we only consider the extracts free, if there are no other
users.
In this particular case, on AArch64 which can fit <2 x double> in a
vector register, the extracts should be free, independently of other
users, because the source vector of the extracts will be in a vector
register directly, so it should be free to use the vector directly.
The SLP vectorized version of noop_extracts_9_lanes is 30%-50% faster on
certain AArch64 CPUs.
It looks like this does not impact any code in
SPEC2000/SPEC2006/MultiSource both on X86 and AArch64 with -O3 -flto.
This originally regressed after D80773, so if there's a better
alternative to explore, I'd be more than happy to do that.
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D99719
1. Need to cleanup InstrElementSize map for each new tree, otherwise might
use sizes from the previous run of the vectorization attempt.
2. No need to include into analysis the instructions from the different basic
blocks to save compile time.
Differential Revision: https://reviews.llvm.org/D99677
