Local symbols in the indirect symbol table contain the value
`INDIRECT_SYMBOL_LOCAL` and the corresponding __pointers entry must
contain the address of the target.
In r349060, I added support for local symbols in the indirect symbol
table, which was checking if the symbol `isDefined` && `!isExternal` to
determine if the symbol is local or not.
It turns out that `isDefined` will return false if the user of the
symbol comes before its definition, and we'll again generate .long 0
which will be the symbol at the adress 0x0.
Instead of doing that, use GlobalValue::hasLocalLinkage() to check if
the symbol is local.
Differential Revision: https://reviews.llvm.org/D66563
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@369671 91177308-0d34-0410-b5e6-96231b3b80d8
The original behavior was to always emit the offsets to each call site in the
call site table as uleb128 values, however on some architectures (eg RISCV)
these uleb128 offsets into the code cannot always be resolved until link time
(because relaxation will invalidate any calculated offsets), and there are no
appropriate relocations for uleb128 values. As a consequence it needs to be
possible to specify an alternative.
This also switches RISCV to use DW_EH_PE_udata4 for call side encodings in
.gcc_except_table
Differential Revision: https://reviews.llvm.org/D63415
Patch by Edward Jones.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@366329 91177308-0d34-0410-b5e6-96231b3b80d8
Because of gp = sdata_start_address + 0x800, gp with signed twelve-bit offset
could covert most of the small data section. Linker relaxation could transfer
the multiple data accessing instructions to a gp base with signed twelve-bit
offset instruction.
Differential Revision: https://reviews.llvm.org/D57493
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358150 91177308-0d34-0410-b5e6-96231b3b80d8
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351636 91177308-0d34-0410-b5e6-96231b3b80d8
Implement options in clang to enable recording the driver command-line
in an ELF section.
Implement a new special named metadata, llvm.commandline, to support
frontends embedding their command-line options in IR/ASM/ELF.
This differs from the GCC implementation in some key ways:
* In GCC there is only one command-line possible per compilation-unit,
in LLVM it mirrors llvm.ident and multiple are allowed.
* In GCC individual options are separated by NULL bytes, in LLVM entire
command-lines are separated by NULL bytes. The advantage of the GCC
approach is to clearly delineate options in the face of embedded
spaces. The advantage of the LLVM approach is to support merging
multiple command-lines unambiguously, while handling embedded spaces
with escaping.
Differential Revision: https://reviews.llvm.org/D54487
Clang Differential Revision: https://reviews.llvm.org/D54489
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@349155 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The TType encoding, LSDA encoding, and personality encoding are all
passed explicitly by CodeGen to the assembler through .cfi_* directives,
so only the AsmPrinter needs to know about them.
The FDE CFI encoding however, controls the encoding of the label
implicitly created by the .cfi_startproc directive. That directive seems
to be special in that it doesn't take an encoding, so the assembler just
has to know how to encode one DSO-local label reference from .eh_frame
to .text.
As a result, it looks like MC will continue to have to know when the
large code model is in use. Perhaps we could invent a '.cfi_startproc
[large]' flag so that this knowledge doesn't need to pollute the
assembler.
Reviewers: davide, lliu0, JDevlieghere
Subscribers: hiraditya, fedor.sergeev, llvm-commits
Differential Revision: https://reviews.llvm.org/D50533
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@339397 91177308-0d34-0410-b5e6-96231b3b80d8
AArch64 ELF ABI does not define a static relocation type for TLS offset within
a module, which makes it impossible for compiler to generate a valid
DW_AT_location content for thread local variables. Currently LLVM generates an
invalid R_AARCH64_ABS64 relocation at the DW_AT_location field for a TLS
variable. That causes trouble for linker because thread local variable does
not have an absolute address at link time. AArch64 GCC solves the problem by
not generating DW_AT_location for thread local variables. We should do the
same in LLVM.
Differential Revision: https://reviews.llvm.org/D43860
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338655 91177308-0d34-0410-b5e6-96231b3b80d8
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331272 91177308-0d34-0410-b5e6-96231b3b80d8
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318490 91177308-0d34-0410-b5e6-96231b3b80d8
These functions are about classifying a global which will actually be
emitted, so it does not make sense for them to take a GlobalValue which may
for example be an alias.
Change the Mach-O object writer and the Hexagon, Lanai and MIPS backends to
look through aliases before using TargetLoweringObjectFile interfaces. These
are functional changes but all appear to be bug fixes.
Differential Revision: https://reviews.llvm.org/D25917
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285006 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
`TargetLoweringObjectFile` can be re-used and thus `TargetLoweringObjectFile::Initialize()`
can be called multiple times causing `Mang` pointer memory leak.
Reviewers: echristo
Subscribers: llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D24659
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281718 91177308-0d34-0410-b5e6-96231b3b80d8
The relative vtable ABI (PR26723) needs PLT relocations to refer to virtual
functions defined in other DSOs. The unnamed_addr attribute means that the
function's address is not significant, so we're allowed to substitute it
with the address of a PLT entry.
Also includes a bonus feature: addends for COFF image-relative references.
Differential Revision: http://reviews.llvm.org/D17938
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267211 91177308-0d34-0410-b5e6-96231b3b80d8
COFF doesn't have sections with mergeable contents. Instead, each
constant pool entry ends up in a COMDAT section. The linker, when
choosing between COMDAT sections, doesn't choose the max alignment of
the two sections. You just get whatever alignment was on the section.
If one constant needed a higher alignment in one object file from
another one, then we will get into trouble if the linker chooses the
lower alignment one.
Instead, lets promote the alignment of the constant pool entry to make
sure we don't use an under aligned constant with an instruction which
assumed otherwise.
This fixes PR26680.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261462 91177308-0d34-0410-b5e6-96231b3b80d8
A profile of an LTO link of Chrome revealed that we were spending some
~30-50% of execution time in the function Constant::getRelocationInfo(),
which is called from TargetLoweringObjectFile::getKindForGlobal() and in turn
from TargetMachine::getNameWithPrefix().
It turns out that we only need the result of getKindForGlobal() when
targeting Mach-O, so this change moves the relevant part of the logic to
TargetLoweringObjectFileMachO.
NFCI.
Differential Revision: http://reviews.llvm.org/D14168
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252014 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: yaron.keren, rafael, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D11079
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242385 91177308-0d34-0410-b5e6-96231b3b80d8
This change unifies how LTOModule and the backend obtain linker flags
for globals: via a new TargetLoweringObjectFile member function named
emitLinkerFlagsForGlobal. A new function LTOModule::getLinkerOpts() returns
the list of linker flags as a single concatenated string.
This change affects the C libLTO API: the function lto_module_get_*deplibs now
exposes an empty list, and lto_module_get_*linkeropts exposes a single element
which combines the contents of all observed flags. libLTO should never have
tried to parse the linker flags; it is the linker's job to do so. Because
linkers will need to be able to parse flags in regular object files, it
makes little sense for libLTO to have a redundant mechanism for doing so.
The new API is compatible with the old one. It is valid for a user to specify
multiple linker flags in a single pragma directive like this:
#pragma comment(linker, "/defaultlib:foo /defaultlib:bar")
The previous implementation would not have exposed
either flag via lto_module_get_*deplibs (as the test in
TargetLoweringObjectFileCOFF::getDepLibFromLinkerOpt was case sensitive)
and would have exposed "/defaultlib:foo /defaultlib:bar" as a single flag via
lto_module_get_*linkeropts. This may have been a bug in the implementation,
but it does give us a chance to fix the interface.
Differential Revision: http://reviews.llvm.org/D10548
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241010 91177308-0d34-0410-b5e6-96231b3b80d8
This starts merging MCSection and MCSectionData.
There are a few issues with the current split between MCSection and
MCSectionData.
* It optimizes the the not as important case. We want the production
of .o files to be really fast, but the split puts the information used
for .o emission in a separate data structure.
* The ELF/COFF/MachO hierarchy is not represented in MCSectionData,
leading to some ad-hoc ways to represent the various flags.
* It makes it harder to remember where each item is.
The attached patch starts merging the two by moving the alignment from
MCSectionData to MCSection.
Most of the patch is actually just dropping 'const', since
MCSectionData is mutable, but MCSection was not.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237936 91177308-0d34-0410-b5e6-96231b3b80d8
COFF COMDATs (for selection kinds other than 'select any') require at
least one non-section symbol in the symbol table.
Satisfy this by morally enhancing the linkage from private to internal.
Differential Revision: http://reviews.llvm.org/D8394
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232570 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
COFF COMDATs (for selection kinds other than 'select any') require at
least one non-section symbol in the symbol table.
Satisfy this by morally enhancing the linkage from private to internal.
Reviewers: rafael
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232539 91177308-0d34-0410-b5e6-96231b3b80d8
Add MachO 32-bit (i.e. arm and x86) support for replacing global GOT equivalent
symbol accesses. Unlike 64-bit targets, there's no GOTPCREL relocation, and
access through a non_lazy_symbol_pointers section is used instead.
-- before
_extgotequiv:
.long _extfoo
_delta:
.long _extgotequiv-_delta
-- after
_delta:
.long L_extfoo$non_lazy_ptr-_delta
.section __IMPORT,__pointers,non_lazy_symbol_pointers
L_extfoo$non_lazy_ptr:
.indirect_symbol _extfoo
.long 0
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231475 91177308-0d34-0410-b5e6-96231b3b80d8
Follow up r230264 and add ARM64 support for replacing global GOT
equivalent symbol accesses by references to the GOT entry for the final
symbol instead, example:
-- before
.globl _foo
_foo:
.long 42
.globl _gotequivalent
_gotequivalent:
.quad _foo
.globl _delta
_delta:
.long _gotequivalent-_delta
-- after
.globl _foo
_foo:
.long 42
.globl _delta
Ltmp3:
.long _foo@GOT-Ltmp3
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231474 91177308-0d34-0410-b5e6-96231b3b80d8
Front-ends could use global unnamed_addr to hold pointers to other
symbols, like @gotequivalent below:
@foo = global i32 42
@gotequivalent = private unnamed_addr constant i32* @foo
@delta = global i32 trunc (i64 sub (i64 ptrtoint (i32** @gotequivalent to i64),
i64 ptrtoint (i32* @delta to i64))
to i32)
The global @delta holds a data "PC"-relative offset to @gotequivalent,
an unnamed pointer to @foo. The darwin/x86-64 assembly output for this follows:
.globl _foo
_foo:
.long 42
.globl _gotequivalent
_gotequivalent:
.quad _foo
.globl _delta
_delta:
.long _gotequivalent-_delta
Since unnamed_addr indicates that the address is not significant, only
the content, we can optimize the case above by replacing pc-relative
accesses to "GOT equivalent" globals, by a PC relative access to the GOT
entry of the final symbol instead. Therefore, "delta" can contain a pc
relative relocation to foo's GOT entry and we avoid the emission of
"gotequivalent", yielding the assembly code below:
.globl _foo
_foo:
.long 42
.globl _delta
_delta:
.long _foo@GOTPCREL+4
There are a couple of advantages of doing this: (1) Front-ends that need
to emit a great deal of data to store pointers to external symbols could
save space by not emitting such "got equivalent" globals and (2) IR
constructs combined with this opt opens a way to represent GOT pcrel
relocations by using the LLVM IR, which is something we previously had
no way to express.
Differential Revision: http://reviews.llvm.org/D6922
rdar://problem/18534217
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230264 91177308-0d34-0410-b5e6-96231b3b80d8
The problem in the original patch was not switching back to .text after printing
an eh table.
Original message:
On ELF, put PIC jump tables in a non executable section.
Fixes PR22558.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229586 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r228939.
The commit broke something in the output of exception handling tables on
darwin x86-64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229203 91177308-0d34-0410-b5e6-96231b3b80d8
This is affecting the behavior of some ObjC++ / AArch64 test cases on Darwin.
Reverting to get the bots green while I track down the source of the changed
behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225311 91177308-0d34-0410-b5e6-96231b3b80d8
COFF lacks a feature that other object file formats support: mergeable
sections.
To work around this, MSVC sticks constant pool entries in special COMDAT
sections so that each constant is in it's own section. This permits
unused constants to be dropped and it also allows duplicate constants in
different translation units to get merged together.
This fixes PR20262.
Differential Revision: http://reviews.llvm.org/D4482
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213006 91177308-0d34-0410-b5e6-96231b3b80d8
* Section association cannot use just the section name as many
sections can have the same name. With this patch, the comdat symbol in
an assoc section is interpreted to mean a symbol in the associated
section and the mapping is discovered from it.
* Comdat symbols were not being set correctly. Instead we were getting
whatever was output first for that section.
A consequence is that associative sections now must use .section to
set the association. Using .linkonce would not work since it is not
possible to change a sections comdat symbol (it is used to decide if
we should create a new section or reuse an existing one).
This includes r210298, which was reverted because it was asserting
on an associated section having the same comdat as the associated
section.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210367 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to put dynamic initializers for weak data into the same
comdat group as the data being initialized. This is necessary for MSVC
ABI compatibility. Once we have comdats for guard variables, we can use
the combination to help GlobalOpt fire more often for weak data with
guarded initialization on other platforms.
Reviewers: nlewycky
Differential Revision: http://reviews.llvm.org/D3499
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209015 91177308-0d34-0410-b5e6-96231b3b80d8
r201608 made llvm corretly handle private globals with MachO. r201622 fixed
a bug in it and r201624 and r201625 were changes for using private linkage,
assuming that llvm would do the right thing.
They all got reverted because r201608 introduced a crash in LTO. This patch
includes a fix for that. The issue was that TargetLoweringObjectFile now has
to be initialized before we can mangle names of private globals. This is
trivially true during the normal codegen pipeline (the asm printer does it),
but LTO has to do it manually.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201700 91177308-0d34-0410-b5e6-96231b3b80d8
The IR
@foo = private constant i32 42
is valid, but before this patch we would produce an invalid MachO from it. It
was invalid because it would use an L label in a section where the liker needs
the labels in order to atomize it.
One way of fixing it would be to just reject this IR in the backend, but that
would not be very front end friendly.
What this patch does is use an 'l' prefix in sections that we know the linker
requires symbols for atomizing them. This allows frontends to just use
private and not worry about which sections they go to or how the linker handles
them.
One small issue with this strategy is that now a symbol name depends on the
section, which is not available before codegen. This is not a problem in
practice. The reason is that it only happens with private linkage, which will
be ignored by the non codegen users (llvm-nm and llvm-ar).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201608 91177308-0d34-0410-b5e6-96231b3b80d8
These methods normally call each other and it is really annoying if the
arguments are in different order. The more common rule was that the arguments
specific to call are first (GV, Encoding, Suffix) and the auxiliary objects
(Mang, TM) come after. This patch changes the exceptions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201044 91177308-0d34-0410-b5e6-96231b3b80d8
It is never null and it is not used in casts, so there is no reason to use a
pointer. This matches how we pass TM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201025 91177308-0d34-0410-b5e6-96231b3b80d8
