The exciting code is actually already enough to handle the splitting
of vector arguments but we were lacking a test case.
This commit adds a test case for vector argument lowering involving
splitting and enable the related support in call lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374589 91177308-0d34-0410-b5e6-96231b3b80d8
When checking for tail call eligibility, we should use the correct CCAssignFn
for each argument, rather than just checking if the caller/callee is varargs or
not.
This is important for tail call lowering with varargs. If we don't check it,
then basically any varargs callee with parameters cannot be tail called on
Darwin, for one thing. If the parameters are all guaranteed to be in registers,
this should be entirely safe.
On top of that, not checking for this could potentially make it so that we have
the wrong stack offsets when checking for tail call eligibility.
Also refactor some of the stuff for CCAssignFnForCall and pull it out into a
helper function.
Update call-translator-tail-call.ll to show that we can now correctly tail call
on Darwin. Also add two extra tail call checks. The first verifies that we still
respect the caller's stack size, and the second verifies that we still don't
tail call when a varargs function has a memory argument.
Differential Revision: https://reviews.llvm.org/D67939
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372897 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for lowering sibling calls with outgoing arguments.
e.g
```
define void @foo(i32 %a)
```
Support is ported from AArch64ISelLowering's `isEligibleForTailCallOptimization`.
The only thing that is missing is a full port of
`TargetLowering::parametersInCSRMatch`. So, if we're using swiftself,
we'll never tail call.
- Rename `analyzeCallResult` to `analyzeArgInfo`, since the function is now used
for both outgoing and incoming arguments
- Teach `OutgoingArgHandler` about tail calls. Tail calls use frame indices for
stack arguments.
- Teach `lowerFormalArguments` to set the bytes in the caller's stack argument
area. This is used later to check if the tail call's parameters will fit on
the caller's stack.
- Add `areCalleeOutgoingArgsTailCallable` to perform the eligibility check on
the callee's outgoing arguments.
For testing:
- Update call-translator-tail-call to verify that we can now tail call with
outgoing arguments, use G_FRAME_INDEX for stack arguments, and respect the
size of the caller's stack
- Remove GISel-specific check lines from speculation-hardening.ll, since GISel
now tail calls like the other selectors
- Add a GISel test line to tailcall-string-rvo.ll since we can tail call in that
test now
- Add a GISel test line to tailcall_misched_graph.ll since we tail call there
now. Add specific check lines for GISel, since the debug output from the
machine-scheduler differs with GlobalISel. The dependency still holds, but
the output comes out in a different order.
Differential Revision: https://reviews.llvm.org/D67471
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@371780 91177308-0d34-0410-b5e6-96231b3b80d8
First we were asserting that the ValNo of a VA was the wrong value. It doesn't actually
make a difference for us in CallLowering but fix that anyway to silence the assert.
The bigger issue was that after fixing the assert we were generating invalid MIR
because the merging/unmerging of values split across multiple registers wasn't
also implemented for memory locs. This happens when we run out of registers and
have to pass the split types like i128 -> i64 x 2 on the stack. This is do-able, but
for now just fall back.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@371693 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for sibcalling calls whose calling convention differs from the
caller's.
- Port over `CCState::resultsCombatible` from CallingConvLower.cpp into
CallLowering. This is used to verify that the way the caller and callee CC
handle incoming arguments matches up.
- Add `CallLowering::analyzeCallResult`. This is basically a port of
`CCState::AnalyzeCallResult`, but using `ArgInfo` rather than `ISD::InputArg`.
- Add `AArch64CallLowering::doCallerAndCalleePassArgsTheSameWay`. This checks
that the calling conventions are compatible, and that the caller and callee
preserve the same registers.
For testing:
- Update call-translator-tail-call.ll to show that we can now handle this.
- Add a GISel line to tailcall-ccmismatch.ll to show that we will not tail call
when the regmasks don't line up.
Differential Revision: https://reviews.llvm.org/D67361
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@371570 91177308-0d34-0410-b5e6-96231b3b80d8
Recommit basic sibling call lowering (https://reviews.llvm.org/D67189)
The issue was that if you have a return type other than void, call lowering
will emit COPYs to get the return value after the call.
Disallow sibling calls other than ones that return void for now. Also
proactively disable swifterror tail calls for now, since there's a similar issue
with COPYs there.
Update call-translator-tail-call.ll to include test cases for each of these
things.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@371114 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for basic sibling call lowering in AArch64. The intent here is
to only handle tail calls which do not change the ABI (hence, sibling calls.)
At this point, it is very restricted. It does not handle
- Vararg calls.
- Calls with outgoing arguments.
- Calls whose calling conventions differ from the caller's calling convention.
- Tail/sibling calls with BTI enabled.
This patch adds
- `AArch64CallLowering::isEligibleForTailCallOptimization`, which is equivalent
to the same function in AArch64ISelLowering.cpp (albeit with the restrictions
above.)
- `mayTailCallThisCC` and `canGuaranteeTCO`, which are identical to those in
AArch64ISelLowering.cpp.
- `getCallOpcode`, which is exactly what it sounds like.
Tail/sibling calls are lowered by checking if they pass target-independent tail
call positioning checks, and checking if they satisfy
`isEligibleForTailCallOptimization`. If they do, then a tail call instruction is
emitted instead of a normal call. If we have a sibling call (which is always the
case in this patch), then we do not emit any stack adjustment operations. When
we go to lower a return, we check if we've already emitted a tail call. If so,
then we skip the return lowering.
For testing, this patch
- Adds call-translator-tail-call.ll to test which tail calls we currently lower,
which ones we don't, and which ones we shouldn't.
- Updates branch-target-enforcement-indirect-calls.ll to show that we fall back
as expected.
Differential Revision: https://reviews.llvm.org/D67189
........
This fails on EXPENSIVE_CHECKS builds due to a -verify-machineinstrs test failure in CodeGen/AArch64/dllimport.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@371051 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for basic sibling call lowering in AArch64. The intent here is
to only handle tail calls which do not change the ABI (hence, sibling calls.)
At this point, it is very restricted. It does not handle
- Vararg calls.
- Calls with outgoing arguments.
- Calls whose calling conventions differ from the caller's calling convention.
- Tail/sibling calls with BTI enabled.
This patch adds
- `AArch64CallLowering::isEligibleForTailCallOptimization`, which is equivalent
to the same function in AArch64ISelLowering.cpp (albeit with the restrictions
above.)
- `mayTailCallThisCC` and `canGuaranteeTCO`, which are identical to those in
AArch64ISelLowering.cpp.
- `getCallOpcode`, which is exactly what it sounds like.
Tail/sibling calls are lowered by checking if they pass target-independent tail
call positioning checks, and checking if they satisfy
`isEligibleForTailCallOptimization`. If they do, then a tail call instruction is
emitted instead of a normal call. If we have a sibling call (which is always the
case in this patch), then we do not emit any stack adjustment operations. When
we go to lower a return, we check if we've already emitted a tail call. If so,
then we skip the return lowering.
For testing, this patch
- Adds call-translator-tail-call.ll to test which tail calls we currently lower,
which ones we don't, and which ones we shouldn't.
- Updates branch-target-enforcement-indirect-calls.ll to show that we fall back
as expected.
Differential Revision: https://reviews.llvm.org/D67189
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@370996 91177308-0d34-0410-b5e6-96231b3b80d8
On AArch64, s128 types have to be split into s64 GPRs when passed as arguments.
This change adds the generic support in call lowering for dealing with multiple
registers, for incoming and outgoing args.
Support for splitting for return types not yet implemented.
Differential Revision: https://reviews.llvm.org/D66180
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@370822 91177308-0d34-0410-b5e6-96231b3b80d8
I've now needed to add an extra parameter to this call twice recently. Not only
is the signature getting extremely unwieldy, but just updating all of the
callsites and implementations is a pain. Putting the parameters in a struct
sidesteps both issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@368408 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This will make it possible to improve IPRA by taking into account
register usage in indirect calls.
NFC yet; this is just laying the groundwork to start building
up patches to take advantage of the information for improved register
allocation.
Reviewers: aditya_nandakumar, volkan, qcolombet, arsenm, rovka, aemerson, paquette
Subscribers: sdardis, wdng, javed.absar, hiraditya, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65488
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@367476 91177308-0d34-0410-b5e6-96231b3b80d8
AMDGPU needs to allocate special argument registers separately from
the user function argument list, so needs direct control over the
CCState.
The ArgLocs argument is only really necessary because CCState doesn't
allow access to it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@366279 91177308-0d34-0410-b5e6-96231b3b80d8
Change the interface of CallLowering::lowerCall to accept several
virtual registers for each argument, instead of just one. This is a
follow-up to D46018.
CallLowering::lowerReturn was similarly refactored in D49660 and
lowerFormalArguments in D63549.
With this change, we no longer pack the virtual registers generated for
aggregates into one big lump before delegating to the target. Therefore,
the target can decide itself whether it wants to handle them as separate
pieces or use one big register.
ARM and AArch64 have been updated to use the passed in virtual registers
directly, which means we no longer need to generate so many
merge/extract instructions.
NFCI for AMDGPU, Mips and X86.
Differential Revision: https://reviews.llvm.org/D63551
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@364512 91177308-0d34-0410-b5e6-96231b3b80d8
Change the interface of CallLowering::lowerCall to accept several
virtual registers for the call result, instead of just one. This is a
follow-up to D46018.
CallLowering::lowerReturn was similarly refactored in D49660 and
lowerFormalArguments in D63549.
With this change, we no longer pack the virtual registers generated for
aggregates into one big lump before delegating to the target. Therefore,
the target can decide itself whether it wants to handle them as separate
pieces or use one big register.
ARM and AArch64 have been updated to use the passed in virtual registers
directly, which means we no longer need to generate so many
merge/extract instructions.
NFCI for AMDGPU, Mips and X86.
Differential Revision: https://reviews.llvm.org/D63550
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@364511 91177308-0d34-0410-b5e6-96231b3b80d8
Change the interface of CallLowering::lowerFormalArguments to accept
several virtual registers for each formal argument, instead of just one.
This is a follow-up to D46018.
CallLowering::lowerReturn was similarly refactored in D49660. lowerCall
will be refactored in the same way in follow-up patches.
With this change, we forward the virtual registers generated for
aggregates to CallLowering. Therefore, the target can decide itself
whether it wants to handle them as separate pieces or use one big
register. We also copy the pack/unpackRegs helpers to CallLowering to
facilitate this.
ARM and AArch64 have been updated to use the passed in virtual registers
directly, which means we no longer need to generate so many
merge/extract instructions.
AArch64 seems to have had a bug when lowering e.g. [1 x i8*], which was
put into a s64 instead of a p0. Added a test-case which illustrates the
problem more clearly (it crashes without this patch) and fixed the
existing test-case to expect p0.
AMDGPU has been updated to unpack into the virtual registers for
kernels. I think the other code paths fall back for aggregates, so this
should be NFC.
Mips doesn't support aggregates yet, so it's also NFC.
x86 seems to have code for dealing with aggregates, but I couldn't find
the tests for it, so I just added a fallback to DAGISel if we get more
than one virtual register for an argument.
Differential Revision: https://reviews.llvm.org/D63549
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@364510 91177308-0d34-0410-b5e6-96231b3b80d8
Allow CallLowering::ArgInfo to contain more than one virtual register.
This is useful when passes split aggregates into several virtual
registers, but need to also provide information about the original type
to the call lowering. Used in follow-up patches.
Differential Revision: https://reviews.llvm.org/D63548
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@364509 91177308-0d34-0410-b5e6-96231b3b80d8
Avoids using a plain unsigned for registers throughoug codegen.
Doesn't attempt to change every register use, just something a little
more than the set needed to build after changing the return type of
MachineOperand::getReg().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@364191 91177308-0d34-0410-b5e6-96231b3b80d8
When we switch to opaque pointer types we will need some way to describe
how many bytes a 'byval' parameter should occupy on the stack. This adds
a (for now) optional extra type parameter.
If present, the type must match the pointee type of the argument.
The original commit did not remap byval types when linking modules, which broke
LTO. This version fixes that.
Note to front-end maintainers: if this causes test failures, it's probably
because the "byval" attribute is printed after attributes without any parameter
after this change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@362128 91177308-0d34-0410-b5e6-96231b3b80d8
When we switch to opaque pointer types we will need some way to describe
how many bytes a 'byval' parameter should occupy on the stack. This adds
a (for now) optional extra type parameter.
If present, the type must match the pointee type of the argument.
Note to front-end maintainers: if this causes test failures, it's probably
because the "byval" attribute is printed after attributes without any parameter
after this change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@362012 91177308-0d34-0410-b5e6-96231b3b80d8
swifterror marks an argument as a register pretending to be a pointer, so we
need a guaranteed mem2reg-like analysis of its uses. Fortunately most of the
infrastructure can be reused from the DAG world.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@361608 91177308-0d34-0410-b5e6-96231b3b80d8
This crash was introduced in r358032 as we try to construct an EVT from an MVT
in order to find the register type for the calling conv. Fall back instead of
trying to do this with an invalid MVT coming from i256.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358314 91177308-0d34-0410-b5e6-96231b3b80d8
required to be passed as different register types. E.g. <2 x i16> may need to
be passed as a larger <2 x i32> type, so formal arg lowering needs to be able
truncate it back. Likewise, when dealing with returns of these types, they need
to be widened in the appropriate way back.
Differential Revision: https://reviews.llvm.org/D60425
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358032 91177308-0d34-0410-b5e6-96231b3b80d8
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351636 91177308-0d34-0410-b5e6-96231b3b80d8
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318490 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Do three things to help with that:
- Add AttributeList::FirstArgIndex, which is an enumerator currently set
to 1. It allows us to change the indexing scheme with fewer changes.
- Add addParamAttr/removeParamAttr. This just shortens addAttribute call
sites that would otherwise need to spell out FirstArgIndex.
- Remove some attribute-specific getters and setters from Function that
take attribute list indices. Most of these were only used from
BuildLibCalls, and doesNotAlias was only used to test or set if the
return value is malloc-like.
I'm happy to split the patch, but I think they are probably easier to
review when taken together.
This patch should be NFC, but it sets the stage to change the indexing
scheme to this, which is more convenient when indexing into an array:
0: func attrs
1: retattrs
2...: arg attrs
Reviewers: chandlerc, pete, javed.absar
Subscribers: david2050, llvm-commits
Differential Revision: https://reviews.llvm.org/D32811
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302060 91177308-0d34-0410-b5e6-96231b3b80d8
This broke the Clang build. (Clang-side patch missing?)
Original commit message:
> [IR] Make add/remove Attributes use AttrBuilder instead of
> AttributeList
>
> This change cleans up call sites and avoids creating temporary
> AttributeList objects.
>
> NFC
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301712 91177308-0d34-0410-b5e6-96231b3b80d8
The method is called "get *Param* Alignment", and is only used for
return values exactly once, so it should take argument indices, not
attribute indices.
Avoids confusing code like:
IsSwiftError = CS->paramHasAttr(ArgIdx, Attribute::SwiftError);
Alignment = CS->getParamAlignment(ArgIdx + 1);
Add getRetAlignment to handle the one case in Value.cpp that wants the
return value alignment.
This is a potentially breaking change for out-of-tree backends that do
their own call lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301682 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This class is a list of AttributeSetNodes corresponding the function
prototype of a call or function declaration. This class used to be
called ParamAttrListPtr, then AttrListPtr, then AttributeSet. It is
typically accessed by parameter and return value index, so
"AttributeList" seems like a more intuitive name.
Rename AttributeSetImpl to AttributeListImpl to follow suit.
It's useful to rename this class so that we can rename AttributeSetNode
to AttributeSet later. AttributeSet is the set of attributes that apply
to a single function, argument, or return value.
Reviewers: sanjoy, javed.absar, chandlerc, pete
Reviewed By: pete
Subscribers: pete, jholewinski, arsenm, dschuff, mehdi_amini, jfb, nhaehnle, sbc100, void, llvm-commits
Differential Revision: https://reviews.llvm.org/D31102
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298393 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds a parameter that lets us pass in the calling convention
of the call to CallLowering::lowerCall. This allows us to handle
situations where the calling convetion of the callee is different from
that of the caller.
Differential Revision: https://reviews.llvm.org/D31039
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298254 91177308-0d34-0410-b5e6-96231b3b80d8
For the hard float calling convention, we just use the D registers.
For the soft-fp calling convention, we use the R registers and move values
to/from the D registers by means of G_SEQUENCE/G_EXTRACT. While doing so, we
make sure to honor the endianness of the target, since the CCAssignFn doesn't do
that for us.
For pure soft float targets, we still bail out because we don't support the
libcalls yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@295295 91177308-0d34-0410-b5e6-96231b3b80d8
Well, sort of. But the lower-level code that invoke used to be using completely
botched the handling of varargs functions, which hopefully won't be possible if
they're using the same code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293670 91177308-0d34-0410-b5e6-96231b3b80d8
Some platforms (notably iOS) use a different calling convention for unnamed vs
named parameters in varargs functions, so we need to keep track of this
information when translating calls.
Since not many platforms are involved, the guts of the special handling is in
the ValueHandler class (with a generic implementation that should work for most
targets).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292283 91177308-0d34-0410-b5e6-96231b3b80d8
We were rounding size in bits down rather than up, leading to 0-sized slots for
i1 (assert!) and bugs for other types not byte-aligned.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288848 91177308-0d34-0410-b5e6-96231b3b80d8
