Summary:
Internally in LLVM's metadata we use DW_OP_entry_value operations with
the same semantics as DWARF; that is, its operand specifies the number
of bytes that the entry value covers.
At the time of emitting entry values we don't know the emitted size of
the DWARF expression that the entry value will cover. Currently the size
is hardcoded to 1 in DIExpression, and other values causes the verifier
to fail. As the size is 1, that effectively means that we can only have
valid entry values for registers that can be encoded in one byte, which
are the registers with DWARF numbers 0 to 31 (as they can be encoded as
single-byte DW_OP_reg0..DW_OP_reg31 rather than a multi-byte
DW_OP_regx). It is a bit confusing, but it seems like llvm-dwarfdump
will print an operation "correctly", even if the byte size is less than
that, which may make it seem that we emit correct DWARF for registers
with DWARF numbers > 31. If you instead use readelf for such cases, it
will interpret the number of specified bytes as a DWARF expression. This
seems like a limitation in llvm-dwarfdump.
As suggested in D66746, a way forward would be to add an internal
variant of DW_OP_entry_value, DW_OP_LLVM_entry_value, whose operand
instead specifies the number of operations that the entry value covers,
and we then translate that into the byte size at the time of emission.
In this patch that internal operation is added. This patch keeps the
limitation that a entry value can only be applied to simple register
locations, but it will fix the issue with the size operand being
incorrect for DWARF numbers > 31.
Reviewers: aprantl, vsk, djtodoro, NikolaPrica
Reviewed By: aprantl
Subscribers: jyknight, fedor.sergeev, hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D67492
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374881 91177308-0d34-0410-b5e6-96231b3b80d8
Dump the DWARF information about call sites and call site parameters into
debug info sections.
The patch also provides an interface for the interpretation of instructions
that could load values of a call site parameters in order to generate DWARF
about the call site parameters.
([13/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60716
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@365467 91177308-0d34-0410-b5e6-96231b3b80d8
This patch addresses PR41675, where a stack-pointer variable is dereferenced
too many times by its location expression, presenting a value on the stack as
the pointer to the stack.
The difference between a stack *pointer* DBG_VALUE and one that refers to a
value on the stack, is currently the indirect flag. However the DWARF backend
will also try to guess whether something is a memory location or not, based
on whether there is any computation in the location expression. By simply
prepending the stack offset to existing expressions, we can accidentally
convert a register location into a memory location, which introduces a
suprise (and unintended) dereference.
The solution is to add DW_OP_stack_value whenever we add a DIExpression
computation to a stack *pointer*. It's an implicit location computed on the
expression stack, thus needs to be flagged as a stack_value.
For the edge case where the offset is zero and the location could be a register
location, DIExpression::prepend will still generate opcodes, and thus
DW_OP_stack_value must still be added.
Differential Revision: https://reviews.llvm.org/D63429
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@364736 91177308-0d34-0410-b5e6-96231b3b80d8
The goal is to improve hwasan's error reporting for stack use-after-return by
recording enough information to allow the specific variable that was accessed
to be identified based on the pointer's tag. Currently we record the PC and
lower bits of SP for each stack frame we create (which will eventually be
enough to derive the base tag used by the stack frame) but that's not enough
to determine the specific tag for each variable, which is the stack frame's
base tag XOR a value (the "tag offset") that is unique for each variable in
a function.
In IR, the tag offset is most naturally represented as part of a location
expression on the llvm.dbg.declare instruction. However, the presence of the
tag offset in the variable's actual location expression is likely to confuse
debuggers which won't know about tag offsets, and moreover the tag offset
is not required for a debugger to determine the location of the variable on
the stack, so at the DWARF level it is represented as an attribute so that
it will be ignored by debuggers that don't know about it.
Differential Revision: https://reviews.llvm.org/D63119
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363635 91177308-0d34-0410-b5e6-96231b3b80d8
TypedDINodeRef<T> is a redundant wrapper of Metadata * that is actually a T *.
Accordingly, change DI{Node,Scope,Type}Ref uses to DI{Node,Scope,Type} * or their const variants.
This allows us to delete many resolve() calls that clutter the code.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D61369
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@360108 91177308-0d34-0410-b5e6-96231b3b80d8
The PrologEpilogInserter need to insert a DW_OP_deref_size before
prepending a memory location expression to an already implicit
expression to avoid having the existing expression act on the memory
address instead of the value behind it.
The reason for using DW_OP_deref_size and not plain DW_OP_deref is that
big-endian targets need to read the right size as simply truncating a
larger read would yield the wrong result (LSB bytes are not at the lower
address).
This re-commit fixes issues reported in the first one. Namely deref was
inserted under wrong conditions and additionally the deref_size argument
was incorrectly encoded.
Differential Revision: https://reviews.llvm.org/D59687
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@359535 91177308-0d34-0410-b5e6-96231b3b80d8
It causes clang to crash while building Chromium. See https://crbug.com/952230
for reproducer.
> The PrologEpilogInserter need to insert a DW_OP_deref_size before
> prepending a memory location expression to an already implicit
> expression to avoid having the existing expression act on the memory
> address instead of the value behind it.
>
> The reason for using DW_OP_deref_size and not plain DW_OP_deref is that
> big-endian targets need to read the right size as simply truncating a
> larger read would yield the wrong result (LSB bytes are not at the lower
> address).
>
> Differential Revision: https://reviews.llvm.org/D59687
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358281 91177308-0d34-0410-b5e6-96231b3b80d8
The PrologEpilogInserter need to insert a DW_OP_deref_size before
prepending a memory location expression to an already implicit
expression to avoid having the existing expression act on the memory
address instead of the value behind it.
The reason for using DW_OP_deref_size and not plain DW_OP_deref is that
big-endian targets need to read the right size as simply truncating a
larger read would yield the wrong result (LSB bytes are not at the lower
address).
Differential Revision: https://reviews.llvm.org/D59687
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358268 91177308-0d34-0410-b5e6-96231b3b80d8
COMMON blocks are a feature of Fortran that has no direct analog in C languages, but they are similar to data sections in assembly language programming. A COMMON block is a named area of memory that holds a collection of variables. Fortran subprograms may map the COMMON block memory area to their own, possibly distinct, non-empty list of variables. A Fortran COMMON block might look like the following example.
COMMON /ALPHA/ I, J
For this construct, the compiler generates a new scope-like DI construct (!DICommonBlock) into which variables (see I, J above) can be placed. As the common block implies a range of storage with global lifetime, the !DICommonBlock refers to a !DIGlobalVariable. The Fortran variable that comprise the COMMON block are also linked via metadata to offsets within the global variable that stands for the entire common block.
@alpha_ = common global %alphabytes_ zeroinitializer, align 64, !dbg !27, !dbg !30, !dbg !33!14 = distinct !DISubprogram(…)
!20 = distinct !DICommonBlock(scope: !14, declaration: !25, name: "alpha")
!25 = distinct !DIGlobalVariable(scope: !20, name: "common alpha", type: !24)
!27 = !DIGlobalVariableExpression(var: !25, expr: !DIExpression())
!29 = distinct !DIGlobalVariable(scope: !20, name: "i", file: !3, type: !28)
!30 = !DIGlobalVariableExpression(var: !29, expr: !DIExpression())
!31 = distinct !DIGlobalVariable(scope: !20, name: "j", file: !3, type: !28)
!32 = !DIExpression(DW_OP_plus_uconst, 4)
!33 = !DIGlobalVariableExpression(var: !31, expr: !32)
The DWARF generated for this is as follows.
DW_TAG_common_block:
DW_AT_name: alpha
DW_AT_location: @alpha_+0
DW_TAG_variable:
DW_AT_name: common alpha
DW_AT_type: array of 8 bytes
DW_AT_location: @alpha_+0
DW_TAG_variable:
DW_AT_name: i
DW_AT_type: integer*4
DW_AT_location: @Alpha+0
DW_TAG_variable:
DW_AT_name: j
DW_AT_type: integer*4
DW_AT_location: @Alpha+4
Patch by Eric Schweitz!
Differential Revision: https://reviews.llvm.org/D54327
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@357934 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce a DW_OP_LLVM_convert Dwarf expression pseudo op that allows
for a convenient way to perform type conversions on the Dwarf expression
stack. As an additional bonus it paves the way for using other Dwarf
v5 ops that need to reference a base_type.
The new DW_OP_LLVM_convert is used from lib/Transforms/Utils/Local.cpp
to perform sext/zext on debug values but mainly the patch is about
preparing terrain for adding other Dwarf v5 ops that need to reference a
base_type.
For Dwarf v5 the op maps to DW_OP_convert and for earlier versions a
complex shift & mask pattern is generated to emulate sext/zext.
This is a recommit of r356442 with trivial fixes for the failing tests.
Differential Revision: https://reviews.llvm.org/D56587
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356451 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce a DW_OP_LLVM_convert Dwarf expression pseudo op that allows
for a convenient way to perform type conversions on the Dwarf expression
stack. As an additional bonus it paves the way for using other Dwarf
v5 ops that need to reference a base_type.
The new DW_OP_LLVM_convert is used from lib/Transforms/Utils/Local.cpp
to perform sext/zext on debug values but mainly the patch is about
preparing terrain for adding other Dwarf v5 ops that need to reference a
base_type.
For Dwarf v5 the op maps to DW_OP_convert and for earlier versions a
complex shift & mask pattern is generated to emulate sext/zext.
Differential Revision: https://reviews.llvm.org/D56587
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356442 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
According to
https://docs.nvidia.com/cuda/archive/10.0/ptx-writers-guide-to-interoperability/index.html#cuda-specific-dwarf,
the compiler should emit the DW_AT_address_class attribute for all
variable and parameter. It means, that DW_AT_address_class attribute
should be used in the non-standard way to support compatibility with the
cuda-gdb debugger.
Clang is able to generate the information about the variable address
class. This information is emitted as the expression sequence
`DW_OP_constu <DWARF Address Space> DW_OP_swap DW_OP_xderef`. The patch
tries to find all such expressions and transform them into
`DW_AT_address_class <DWARF Address Space>` if target is NVPTX and the debugger is gdb.
If the expression is not found, then default values are used. For the
local variables <DWARF Address Space> is set to ADDR_local_space(6), for
the globals <DWARF Address Space> is set to ADDR_global_space(5). The
values are taken from the table in the same section 5.2. CUDA-Specific
DWARF Definitions.
Reviewers: echristo, probinson
Subscribers: jholewinski, aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D57157
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353203 91177308-0d34-0410-b5e6-96231b3b80d8
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351636 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Added a pair of APIs for encoding/decoding the 3 components of a DWARF discriminator described in http://lists.llvm.org/pipermail/llvm-dev/2016-October/106532.html: the base discriminator, the duplication factor (useful in profile-guided optimization) and the copy index (used to identify copies of code in cases like loop unrolling)
The encoding packs 3 unsigned values in 32 bits. This CL addresses 2 issues:
- communicates overflow back to the user
- supports encoding all 3 components together. Current APIs assume a sequencing of events. For example, creating a new discriminator based on an existing one by changing the base discriminator was not supported.
Reviewers: davidxl, danielcdh, wmi, dblaikie
Reviewed By: dblaikie
Subscribers: zzheng, dmgreen, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D55681
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@349973 91177308-0d34-0410-b5e6-96231b3b80d8
This will hold flags specific to subprograms. In the future
we could potentially free up scarce bits in DIFlags by moving
subprogram-specific flags from there to the new flags word.
This patch does not change IR/bitcode formats, that will be
done in a follow-up.
Differential Revision: https://reviews.llvm.org/D54597
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@347239 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Ranges base address specifiers can save a lot of object size in
relocation records especially in optimized builds.
For an optimized self-host build of Clang with split DWARF and debug
info compression in object files, but uncompressed debug info in the
executable, this change produces about 18% smaller object files and 6%
larger executable.
While it would've been nice to turn this on by default, gold's 32 bit
gdb-index support crashes on this input & I don't think there's any
perfect heuristic to implement solely in LLVM that would suffice - so
we'll need a flag one way or another (also possible people might want to
aggressively optimized for executable size that contains debug info
(even with compression this would still come at some cost to executable
size)) - so let's plumb it through.
Differential Revision: https://reviews.llvm.org/D54242
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@346788 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Some lines have a hit counter where they should not have one.
For example, in C++, some cleanup is adding at the end of a scope represented by a '}'.
So such a line has a hit counter where a user expects to not have one.
The goal of the patch is to add this information in DILocation which is used to get the covered lines in GCOVProfiling.cpp.
A following patch in clang will add this information when generating IR (https://reviews.llvm.org/D49916).
Reviewers: marco-c, davidxl, vsk, javed.absar, rnk
Reviewed By: rnk
Subscribers: eraman, xur, danielcdh, aprantl, rnk, dblaikie, #debug-info, vsk, llvm-commits, sylvestre.ledru
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D49915
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@342631 91177308-0d34-0410-b5e6-96231b3b80d8
The function's new implementation from r340583 had a bug in it that
could cause an invalid scope to be generated when merging two
DILocations with no common ancestor scope.
This patch detects this situation and picks the scope of the first
location. This is not perfect, because the scope is misleading, but on
the other hand, this will be a line 0 location.
rdar://problem/43687474
Differential Revision: https://reviews.llvm.org/D51238
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@340672 91177308-0d34-0410-b5e6-96231b3b80d8
Fix a set of related bugs:
* Considering two locations as equivalent when their lines are the same
but their scopes are different causes erroneous debug info that
attributes a commoned call to be attributed to one of the two calls it
was commoned from.
* The previous code to compute a new location's scope was inaccurate and
would use the inlinedAt that was the /parent/ of the inlinedAt that is
the nearest common one, and also used that parent scope instead of the
nearest common scope.
* Not generating new locations generally seemed like a lower quality
choice
There was some risk that generating more new locations could hurt object
size by making more fine grained line table entries, but it looks like
that was offset by the decrease in line table (& address & ranges) size
caused by more accurately computing the scope - which likely lead to
fewer range entries (more contiguous ranges) & reduced size that way.
All up with these changes I saw minor reductions (-1.21%, -1.77%) in
.rela.debug_ranges and .rela.debug_addr (in a fission, compressed debug
info build) as well as other minor size changes (generally reductinos)
across the board (-1.32% debug_info.dwo, -1.28% debug_loc.dwo). Measured
in an optimized (-O2) build of the clang binary.
If you are investigating a size regression in an optimized debug builds,
this is certainly a patch to look into - and I'd be happy to look into
any major regressions found & see what we can do to address them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@340583 91177308-0d34-0410-b5e6-96231b3b80d8
In cases where the debugger load time is a worthwhile tradeoff (or less
costly - such as loading from a DWP instead of a variety of DWOs
(possibly over a high-latency/distributed filesystem)) against object
file size, it can be reasonable to disable pubnames and corresponding
gdb-index creation in the linker.
A backend-flag version of this was implemented for NVPTX in
D44385/r327994 - which was fine for NVPTX which wouldn't mix-and-match
CUs. Now that it's going to be a user-facing option (likely powered by
"-gno-pubnames", the same as GCC) it should be encoded in the
DICompileUnit so it can vary per-CU.
After this, likely the NVPTX support should be migrated to the metadata
& the previous flag implementation should be removed.
Reviewers: aprantl
Differential Revision: https://reviews.llvm.org/D50213
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@339939 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Added an option that allows to emit only '.loc' and '.file' kind debug
directives, but disables emission of the DWARF sections. Required for
NVPTX target to support profiling. It requires '.loc' and '.file'
directives, but does not require any DWARF sections for the profiler.
Reviewers: probinson, echristo, dblaikie
Subscribers: aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46021
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338616 91177308-0d34-0410-b5e6-96231b3b80d8
LowerDbgDeclare inserts a dbg.value before each use of an address
described by a dbg.declare. When inserting a dbg.value before a CallInst
use, however, it fails to append DW_OP_deref to the DIExpression.
The DW_OP_deref is needed to reflect the fact that a dbg.value describes
a source variable directly (as opposed to a dbg.declare, which relies on
pointer indirection).
This patch adds in the DW_OP_deref where needed. This results in the
correct values being shown during a debug session for a program compiled
with ASan and optimizations (see https://reviews.llvm.org/D49520). Note
that ConvertDebugDeclareToDebugValue is already correct -- no changes
there were needed.
One complication is that SelectionDAG is unable to distinguish between
direct and indirect frame-index (FRAMEIX) SDDbgValues. This patch also
fixes this long-standing issue in order to not regress integration tests
relying on the incorrect assumption that all frame-index SDDbgValues are
indirect. This is a necessary fix: the newly-added DW_OP_derefs cannot
be lowered properly otherwise. Basically the fix prevents a direct
SDDbgValue with DIExpression(DW_OP_deref) from being dereferenced twice
by a debugger. There were a handful of tests relying on this incorrect
"FRAMEIX => indirect" assumption which actually had incorrect
DW_AT_locations: these are all fixed up in this patch.
Testing:
- check-llvm, and an end-to-end test using lldb to debug an optimized
program.
- Existing unit tests for DIExpression::appendToStack fully cover the
new DIExpression::append utility.
- check-debuginfo (the debug info integration tests)
Differential Revision: https://reviews.llvm.org/D49454
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338069 91177308-0d34-0410-b5e6-96231b3b80d8
appendToVector used the wrong overload of SmallVector::append, resulting
in it appending the same element to a vector `getSize()` times. This did
not cause a problem when initially committed because appendToVector was
only used to append 1-element operands.
This changes appendToVector to use the correct overload of append().
Testing: ./unittests/IR/IRTests --gtest_filter='*DIExpressionTest*'
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336466 91177308-0d34-0410-b5e6-96231b3b80d8
The replaceAllDbgUsesWith utility helps passes preserve debug info when
replacing one value with another.
This improves upon the existing insertReplacementDbgValues API by:
- Updating debug intrinsics in-place, while preventing use-before-def of
the replacement value.
- Falling back to salvageDebugInfo when a replacement can't be made.
- Moving the responsibiliy for rewriting llvm.dbg.* DIExpressions into
common utility code.
Along with the API change, this teaches replaceAllDbgUsesWith how to
create DIExpressions for three basic integer and pointer conversions:
- The no-op conversion. Applies when the values have the same width, or
have bit-for-bit compatible pointer representations.
- Truncation. Applies when the new value is wider than the old one.
- Zero/sign extension. Applies when the new value is narrower than the
old one.
Testing:
- check-llvm, check-clang, a stage2 `-g -O3` build of clang,
regression/unit testing.
- This resolves a number of mis-sized dbg.value diagnostics from
Debugify.
Differential Revision: https://reviews.llvm.org/D48676
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336451 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When salvaging a dbg.declare/dbg.addr we should not add
DW_OP_stack_value to the DIExpression
(see test/Transforms/InstCombine/salvage-dbg-declare.ll).
Consider this example
%vla = alloca i32, i64 2
call void @llvm.dbg.declare(metadata i32* %vla, metadata !1, metadata !DIExpression())
Instcombine will turn it into
%vla1 = alloca [2 x i32]
%vla1.sub = getelementptr inbounds [2 x i32], [2 x i32]* %vla, i64 0, i64 0
call void @llvm.dbg.declare(metadata [2 x i32]* %vla1.sub, metadata !19, metadata !DIExpression())
If the GEP can be eliminated, then the dbg.declare will be salvaged
and we should get
%vla1 = alloca [2 x i32]
call void @llvm.dbg.declare(metadata [2 x i32]* %vla1, metadata !19, metadata !DIExpression())
The problem was that salvageDebugInfo did not recognize dbg.declare
as being indirect (%vla1 points to the value, it does not hold the
value), so we incorrectly got
call void @llvm.dbg.declare(metadata [2 x i32]* %vla1, metadata !19, metadata !DIExpression(DW_OP_stack_value))
I also made sure that llvm::salvageDebugInfo and
DIExpression::prependOpcodes do not add DW_OP_stack_value to
the DIExpression in case no new operands are added to the
DIExpression. That way we avoid to, unneccessarily, turn a
register location expression into an implicit location expression
in some situations (see test11 in test/Transforms/LICM/sinking.ll).
Reviewers: aprantl, vsk
Reviewed By: aprantl, vsk
Subscribers: JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D48837
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336191 91177308-0d34-0410-b5e6-96231b3b80d8
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331841 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When we create a fragment expression, and there already is an
old fragment expression, we assert that the new fragment is
within the range for the old fragment.
If for example the old fragment expression says that we
describe bit 10-16 of a variable (Offset=10, Size=6),
and we now want to create a new fragment expression only
describing bit 3-6 of the original value, then the resulting
fragment expression should have Offset=13, Size=3.
The assert is supposed to catch if the resulting fragment
expression is outside the range for the old fragment. However,
it used to verify that the Offset+Size of the new fragment was
smaller or equal than Offset+Size for the old fragment. What
we really want to check is that Offset+Size of the new fragment
is smaller than the Size of the old fragment.
Reviewers: aprantl, vsk
Reviewed By: aprantl
Subscribers: davide, llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D46391
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331465 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for fragment expressions
TryToShrinkGlobalToBoolean() which were previously just dropped.
Thanks to Reid Kleckner for providing me a reproducer!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331086 91177308-0d34-0410-b5e6-96231b3b80d8
This lifts a restriction on DILocation::getMergedLocation(), allowing it
to create merged locations for instructions other than calls.
Instruction::applyMergedLocation() now defaults to creating merged
locations for all instructions.
The default behavior of getMergedLocation() is unchanged: callers which
invoke it directly are unaffected.
This change will enable a follow-up Mem2Reg fix which improves crash
reporting.
Differential Revision: https://reviews.llvm.org/D45396
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@329955 91177308-0d34-0410-b5e6-96231b3b80d8
In DWARF v5 the Line Number Program Header is extensible, allowing values with
new content types. In this extension a content type is added,
DW_LNCT_LLVM_source, which contains the embedded source code of the file.
Add new optional attribute for !DIFile IR metadata called source which contains
source text. Use this to output the source to the DWARF line table of code
objects. Analogously extend METADATA_FILE in Bitcode and .file directive in ASM
to support optional source.
Teach llvm-dwarfdump and llvm-objdump about the new values. Update the output
format of llvm-dwarfdump to make room for the new attribute on file_names
entries, and support embedded sources for the -source option in llvm-objdump.
Differential Revision: https://reviews.llvm.org/D42765
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@325970 91177308-0d34-0410-b5e6-96231b3b80d8
Here are the number of additional debug values salvaged in a stage2
build of clang:
63 SALVAGE: MUL
1250 SALVAGE: SDIV
(No values were salvaged from `srem` instructions in this experiment,
but it's a simple case to handle so we might as well.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@324976 91177308-0d34-0410-b5e6-96231b3b80d8
Here are the number of additional debug values salvaged in a stage2
build of clang:
1912 SALVAGE: ASHR
405 SALVAGE: LSHR
249 SALVAGE: SHL
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@324975 91177308-0d34-0410-b5e6-96231b3b80d8
