Summary:
This clang-tidy check is looking for unsigned integer variables whose initializer
starts with an implicit cast from llvm::Register and changes the type of the
variable to llvm::Register (dropping the llvm:: where possible).
Partial reverts in:
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
X86FixupLEAs.cpp - Some functions return unsigned and arguably should be MCRegister
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
HexagonBitSimplify.cpp - Function takes BitTracker::RegisterRef which appears to be unsigned&
MachineVerifier.cpp - Ambiguous operator==() given MCRegister and const Register
PPCFastISel.cpp - No Register::operator-=()
PeepholeOptimizer.cpp - TargetInstrInfo::optimizeLoadInstr() takes an unsigned&
MachineTraceMetrics.cpp - MachineTraceMetrics lacks a suitable constructor
Manual fixups in:
ARMFastISel.cpp - ARMEmitLoad() now takes a Register& instead of unsigned&
HexagonSplitDouble.cpp - Ternary operator was ambiguous between unsigned/Register
HexagonConstExtenders.cpp - Has a local class named Register, used llvm::Register instead of Register.
PPCFastISel.cpp - PPCEmitLoad() now takes a Register& instead of unsigned&
Depends on D65919
Reviewers: arsenm, bogner, craig.topper, RKSimon
Reviewed By: arsenm
Subscribers: RKSimon, craig.topper, lenary, aemerson, wuzish, jholewinski, MatzeB, qcolombet, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, wdng, nhaehnle, sbc100, jgravelle-google, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, javed.absar, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, tpr, PkmX, jocewei, jsji, Petar.Avramovic, asbirlea, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65962
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@369041 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
On windows if the frame size exceed 4096 bytes, compiler need to
generate a call to _alloca_probe. X86CallFrameOptimization pass
changes the reserved stack size and cause of stack probe function
not be inserted. This patch fix the issue by detecting the call
frame size, if the size exceed 4096 bytes, drop X86CallFrameOptimization.
Reviewers: craig.topper, wxiao3, annita.zhang, rnk, RKSimon
Reviewed By: rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65923
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@368503 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
- Remove redundant initializations from pass constructors that were
already being initialized by LLVMInitializeX86Target().
- Add initialization function for the FPS pass.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63218
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363221 91177308-0d34-0410-b5e6-96231b3b80d8
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351636 91177308-0d34-0410-b5e6-96231b3b80d8
Because we create a new kind of debug instruction, DBG_LABEL, we need to
check all passes which use isDebugValue() to check MachineInstr is debug
instruction or not. When expelling debug instructions, we should expel
both DBG_VALUE and DBG_LABEL. So, I create a new function,
isDebugInstr(), in MachineInstr to check whether the MachineInstr is
debug instruction or not.
This patch has no new test case. I have run regression test and there is
no difference in regression test.
Differential Revision: https://reviews.llvm.org/D45342
Patch by Hsiangkai Wang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331844 91177308-0d34-0410-b5e6-96231b3b80d8
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318490 91177308-0d34-0410-b5e6-96231b3b80d8
This header includes CodeGen headers, and is not, itself, included by
any Target headers, so move it into CodeGen to match the layering of its
implementation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317647 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
r264440 added or/and patterns for storing -1 or 0 with the intention of decreasing code size. However,
X86CallFrameOptimization does not recognize these memory accesses so it will not replace them with push's when profitable.
This patch fixes this problem by teaching X86CallFrameOptimization these store 0/-1 idioms.
An alternative fix would be to prevent the 'store 0/1 idioms' patterns from firing when accessing the stack. This would save
the need to teach the pass about these idioms. However, because X86CallFrameOptimization does not always fire we may result
in cases where neither X86CallFrameOptimization not the patterns for 'store 0/1 idioms' fire.
Fixes pr34863
Reviewers: DavidKreitzer, guyblank, aymanmus
Reviewed By: aymanmus
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38738
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316431 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAG inserts a copy of ESP into a virtual register.
X86CallFrameOptimization assumed that the COPY, if present, is always
right after the call-frame setup instruction (ADJCALLSTACKDOWN). This was a
wrong assumption as the COPY can be located anywhere between the call-frame setup
instruction and its first use. If the COPY happened to be located in a different
location than what X86CallFrameOptimization assumed, visiting it while
processing the call chain would lead to a conservative bail-out.
The fix is quite straightfoward, scan ahead for the stack-pointer copy and make note
of it so it can be ignored while processing the call chain.
Fixes pr34903
Differential Revision: https://reviews.llvm.org/D38730
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316416 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The motivation of this change is to enable .mir testing for this pass.
Added one test case to cover the functionality, this same case will be improved by
a future patch.
Reviewers: igorb, guyblank, DavidKreitzer
Reviewed By: guyblank, DavidKreitzer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38729
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316412 91177308-0d34-0410-b5e6-96231b3b80d8
CFI instructions that set appropriate cfa offset and cfa register are now
inserted in emitEpilogue() in X86FrameLowering.
Majority of the changes in this patch:
1. Ensure that CFI instructions do not affect code generation.
2. Enable maintaining correct information about cfa offset and cfa register
in a function when basic blocks are reordered, merged, split, duplicated.
These changes are target independent and described below.
Changed CFI instructions so that they:
1. are duplicable
2. are not counted as instructions when tail duplicating or tail merging
3. can be compared as equal
Add information to each MachineBasicBlock about cfa offset and cfa register
that are valid at its entry and exit (incoming and outgoing CFI info). Add
support for updating this information when basic blocks are merged, split,
duplicated, created. Add a verification pass (CFIInfoVerifier) that checks
that outgoing cfa offset and register of predecessor blocks match incoming
values of their successors.
Incoming and outgoing CFI information is used by a late pass
(CFIInstrInserter) that corrects CFA calculation rule for a basic block if
needed. That means that additional CFI instructions get inserted at basic
block beginning to correct the rule for calculating CFA. Having CFI
instructions in function epilogue can cause incorrect CFA calculation rule
for some basic blocks. This can happen if, due to basic block reordering,
or the existence of multiple epilogue blocks, some of the blocks have wrong
cfa offset and register values set by the epilogue block above them.
Patch by Violeta Vukobrat.
Differential Revision: https://reviews.llvm.org/D18046
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306529 91177308-0d34-0410-b5e6-96231b3b80d8
Instructions CALLSEQ_START..CALLSEQ_END and their target dependent
counterparts keep data like frame size, stack adjustment etc. These
data are accessed by getOperand using hard coded indices. It is
error prone way. This change implements the access by special methods,
which improve readability and allow changing data representation without
massive changes of index values.
Differential Revision: https://reviews.llvm.org/D31953
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300196 91177308-0d34-0410-b5e6-96231b3b80d8
Recommitting r288293 with some extra fixes for GlobalISel code.
Most of the exception handling members in MachineModuleInfo is actually
per function data (talks about the "current function") so it is better
to keep it at the function instead of the module.
This is a necessary step to have machine module passes work properly.
Also:
- Rename TidyLandingPads() to tidyLandingPads()
- Use doxygen member groups instead of "//===- EH ---"... so it is clear
where a group ends.
- I had to add an ugly const_cast at two places in the AsmPrinter
because the available MachineFunction pointers are const, but the code
wants to call tidyLandingPads() in between
(markFunctionEnd()/endFunction()).
Differential Revision: https://reviews.llvm.org/D27227
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288405 91177308-0d34-0410-b5e6-96231b3b80d8
Most of the exception handling members in MachineModuleInfo is actually
per function data (talks about the "current function") so it is better
to keep it at the function instead of the module.
This is a necessary step to have machine module passes work properly.
Also:
- Rename TidyLandingPads() to tidyLandingPads()
- Use doxygen member groups instead of "//===- EH ---"... so it is clear
where a group ends.
- I had to add an ugly const_cast at two places in the AsmPrinter
because the available MachineFunction pointers are const, but the code
wants to call tidyLandingPads() in between
(markFunctionEnd()/endFunction()).
Differential Revision: https://reviews.llvm.org/D27227
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288293 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid implicit conversions from MachineInstrBundleIterator to
MachineInstr*, mainly by preferring MachineInstr& over MachineInstr* and
using range-based for loops.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275149 91177308-0d34-0410-b5e6-96231b3b80d8
This removes the code path that generate "synchronous" (only correct at call site) CFA.
We will probably want to re-introduce it once we are capable of emitting different
.eh_frame and .debug_frame sections.
Differential Revision: http://reviews.llvm.org/D14948
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254874 91177308-0d34-0410-b5e6-96231b3b80d8
When push instructions are being used to pass function arguments on
the stack, and either EH or debugging are enabled, we need to generate
.cfi_adjust_cfa_offset directives appropriately. For (synch) EH, it is
enough for the CFA offset to be correct at every call site, while
for debugging we want to be correct after every push.
Darwin does not support this well, so don't use pushes whenever it
would be required.
Differential Revision: http://reviews.llvm.org/D13767
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251904 91177308-0d34-0410-b5e6-96231b3b80d8
We emit 1 compact unwind encoding per function, and this can’t represent
the varying stack pointer that will be generated by X86CallFrameOptimization.
Disable the optimization on Darwin.
(It might be possible to split the function into multiple ranges
and emit 1 compact unwind info per range. The compact unwind emission
code isn’t ready for that and this kind of info certainly isn’t
tested/used anywhere. It might be worth exploring this path if we want
to get the space savings at some point though)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249694 91177308-0d34-0410-b5e6-96231b3b80d8
This abstracts away the test for "when can we fold across a MachineInstruction"
into the the MI interface, and changes call-frame optimization use the same test
the peephole optimizer users.
Differential Revision: http://reviews.llvm.org/D11945
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244729 91177308-0d34-0410-b5e6-96231b3b80d8
The SP was always unconditionally assigned to later, but initialised early.
This delays the initialisation, and avoids the dead store. Identified by
clang static analysis. No functional change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244423 91177308-0d34-0410-b5e6-96231b3b80d8
Create wrapper methods in the Function class for the OptimizeForSize and MinSize
attributes. We want to hide the logic of "or'ing" them together when optimizing
just for size (-Os).
Currently, we are not consistent about this and rely on a front-end to always set
OptimizeForSize (-Os) if MinSize (-Oz) is on. Thus, there are 18 FIXME changes here
that should be added as follow-on patches with regression tests.
This patch is NFC-intended: it just replaces existing direct accesses of the attributes
by the equivalent wrapper call.
Differential Revision: http://reviews.llvm.org/D11734
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243994 91177308-0d34-0410-b5e6-96231b3b80d8
This allows more call sequences to use pushes instead of movs when optimizing for size.
In particular, calling conventions that pass some parameters in registers (e.g. thiscall) are now supported.
This should no longer cause miscompiles, now that a bug in emitPrologue was fixed in r242395.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242398 91177308-0d34-0410-b5e6-96231b3b80d8
It miscompiles some code and a reduced test case has been sent to the
author.
This reverts commit r240257.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242373 91177308-0d34-0410-b5e6-96231b3b80d8
This allows more call sequences to use pushes instead of movs when optimizing for size.
In particular, calling conventions that pass some parameters in registers (e.g. thiscall) are now supported.
Differential Revision: http://reviews.llvm.org/D10500
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240257 91177308-0d34-0410-b5e6-96231b3b80d8
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240137 91177308-0d34-0410-b5e6-96231b3b80d8
