The static analyzer is warning about a potential null dereference, but we should be able to use cast<> directly and if not assert will fire for us.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@375103 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is the first change to enable the TLI to be built per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
This change should not affect behavior, as the provided function is not
yet used to build a specifically per-function TLI, but rather enables
that migration.
Most of the changes were very mechanical, e.g. passing a Function to the
legacy analysis pass's getTLI interface, or in Module level cases,
adding a callback. This is similar to the way the per-function TTI
analysis works.
There was one place where we were looking for builtins but not in the
context of a specific function. See FindCXAAtExit in
lib/Transforms/IPO/GlobalOpt.cpp. I'm somewhat concerned my workaround
could provide the wrong behavior in some corner cases. Suggestions
welcome.
Reviewers: chandlerc, hfinkel
Subscribers: arsenm, dschuff, jvesely, nhaehnle, mehdi_amini, javed.absar, sbc100, jgravelle-google, eraman, aheejin, steven_wu, george.burgess.iv, dexonsmith, jfb, asbirlea, gchatelet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66428
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@371284 91177308-0d34-0410-b5e6-96231b3b80d8
unreachable loop.
updatePredecessorProfileMetadata in jumpthreading tries to find the
first dominating predecessor block for a PHI value by searching upwards
the predecessor block chain.
But jumpthreading may see some temporary IR state which contains
unreachable bb not being cleaned up. If an unreachable loop happens to
be on the predecessor block chain, keeping chasing the predecessor
block will run into an infinite loop.
The patch fixes it.
Differential Revision: https://reviews.llvm.org/D65310
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@367154 91177308-0d34-0410-b5e6-96231b3b80d8
If the block being cloned contains a PHI node, in general, we need to
clone that PHI node, even though it's trivial. If the operand of the PHI
is an instruction in the block being cloned, the correct value for the
operand doesn't exist until SSAUpdater constructs it.
We usually don't hit this issue because we try to avoid threading across
loop headers, but it's possible to hit this in some cases involving
irreducible CFGs. I added a flag to allow threading across loop headers
to make the testcase easier to understand.
Thanks to Brian Rzycki for reducing the testcase.
Fixes https://bugs.llvm.org/show_bug.cgi?id=42085.
Differential Revision: https://reviews.llvm.org/D63913
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@365094 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The return value of a TryToUnfoldSelect call was not checked, which led to an
incorrectly preserved loop info and some crash.
The original crash was reported on https://reviews.llvm.org/D59514.
Reviewers: davidxl, amehsan
Reviewed By: davidxl
Subscribers: fhahn, brzycki, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61920
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@360780 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes bug 40992: https://bugs.llvm.org/show_bug.cgi?id=40992
There is potential for miscompiled code emitted from JumpThreading when
analyzing a block with one or more indirectbr or callbr predecessors. The
ProcessThreadableEdges() function incorrectly folds conditional branches
into an unconditional branch.
This patch prevents incorrect branch folding without fully pessimizing
other potential threading opportunities through the same basic block.
This IR shape was manually fed in via opt and is unclear if clang and the
full pass pipeline will ever emit similar code shapes.
Thanks to Matthias Liedtke for the bug report and simplified IR example.
Differential Revision: https://reviews.llvm.org/D60284
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@357930 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes bug 37966: https://bugs.llvm.org/show_bug.cgi?id=37966
The Jump Threading pass will replace certain conditional branch
instructions with unconditional branches when it can prove that only one
branch can occur. Prior to this patch, it would not carry the debug
info from the old instruction to the new one.
This patch fixes the bug described by copying the debug info from the
conditional branch instruction to the new unconditional branch
instruction, and adds a regression test for the Jump Threading pass that
covers this case.
Patch by Stephen Tozer!
Differential Revision: https://reviews.llvm.org/D58963
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@355822 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch separates two semantics of `applyUpdates`:
1. User provides an accurate CFG diff and the dominator tree is updated according to the difference of `the number of edge insertions` and `the number of edge deletions` to infer the status of an edge before and after the update.
2. User provides a sequence of hints. Updates mentioned in this sequence might never happened and even duplicated.
Logic changes:
Previously, removing invalid updates is considered a side-effect of deduplication and is not guaranteed to be reliable. To handle the second semantic, `applyUpdates` does validity checking before deduplication, which can cause updates that have already been applied to be submitted again. Then, different calls to `applyUpdates` might cause unintended consequences, for example,
```
DTU(Lazy) and Edge A->B exists.
1. DTU.applyUpdates({{Delete, A, B}, {Insert, A, B}}) // User expects these 2 updates result in a no-op, but {Insert, A, B} is queued
2. Remove A->B
3. DTU.applyUpdates({{Delete, A, B}}) // DTU cancels this update with {Insert, A, B} mentioned above together (Unintended)
```
But by restricting the precondition that updates of an edge need to be strictly ordered as how CFG changes were made, we can infer the initial status of this edge to resolve this issue.
Interface changes:
The second semantic of `applyUpdates` is separated to `applyUpdatesPermissive`.
These changes enable DTU(Lazy) to use the first semantic if needed, which is quite useful in `transforms/utils`.
Reviewers: kuhar, brzycki, dmgreen, grosser
Reviewed By: brzycki
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58170
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@354669 91177308-0d34-0410-b5e6-96231b3b80d8
This patch accompanies the RFC posted here:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/127239.html
This patch adds a new CallBr IR instruction to support asm-goto
inline assembly like gcc as used by the linux kernel. This
instruction is both a call instruction and a terminator
instruction with multiple successors. Only inline assembly
usage is supported today.
This also adds a new INLINEASM_BR opcode to SelectionDAG and
MachineIR to represent an INLINEASM block that is also
considered a terminator instruction.
There will likely be more bug fixes and optimizations to follow
this, but we felt it had reached a point where we would like to
switch to an incremental development model.
Patch by Craig Topper, Alexander Ivchenko, Mikhail Dvoretckii
Differential Revision: https://reviews.llvm.org/D53765
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353563 91177308-0d34-0410-b5e6-96231b3b80d8
DomTreeUpdater depends on headers from Analysis, but is in IR. This is a
layering violation since Analysis depends on IR. Relocate this code from IR
to Analysis to fix the layering violation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353265 91177308-0d34-0410-b5e6-96231b3b80d8
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351636 91177308-0d34-0410-b5e6-96231b3b80d8
Currently when a select has a constant value in one branch and the select feeds
a conditional branch (via a compare/ phi and compare) we unfold the select
statement. This results in threading the conditional branch later on. Similar
opportunity exists when a select (with a constant in one branch) feeds a
switch (via a phi node). The patch unfolds select under this condition.
A testcase is provided.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@350931 91177308-0d34-0410-b5e6-96231b3b80d8
This patch updates DuplicateInstructionsInSplitBetween to update a DTU
instead of applying updates to the DT directly.
Given that there only are 2 users, also updated them in this patch to
avoid churn.
I slightly moved the code in CallSiteSplitting around to reduce the
places where we have to pass in DTU. If necessary, I could split those
changes in a separate patch.
This fixes missing DT updates when dealing with musttail calls in
CallSiteSplitting, by using DTU->deleteBB.
Reviewers: junbuml, kuhar, NutshellySima, indutny, brzycki
Reviewed By: NutshellySima
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@346769 91177308-0d34-0410-b5e6-96231b3b80d8
ComputeValueKnownInPredecessors has a "visited" set to prevent infinite
loops, since a value can be visited more than once. However, the
implementation didn't prevent the algorithm from taking exponential
time. Instead of removing elements from the RecursionSet one at a time,
we should keep around the whole set until
ComputeValueKnownInPredecessors finishes, then discard it.
The testcase is synthetic because I was having trouble effectively
reducing the original. But it's basically the same idea.
Instead of failing, we could theoretically cache the result instead.
But I don't think it would help substantially in practice.
Differential Revision: https://reviews.llvm.org/D54239
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@346562 91177308-0d34-0410-b5e6-96231b3b80d8
This requires updating a number of .cpp files to adapt to the new API.
I've just systematically updated all uses of `TerminatorInst` within
these files te `Instruction` so thta I won't have to touch them again in
the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344498 91177308-0d34-0410-b5e6-96231b3b80d8
rL340921 has been reverted by rL340923 due to linkage dependency
from Transform/Utils to Analysis which is not allowed. In this patch
this has been fixed, a new utility function moved to Analysis.
Differential Revision: https://reviews.llvm.org/D51152
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@341014 91177308-0d34-0410-b5e6-96231b3b80d8
We have multiple places in code where we try to identify whether or not
some instruction is a guard. This patch factors out this logic into a separate
utility function which works uniformly in all places.
Differential Revision: https://reviews.llvm.org/D51152
Reviewed By: fedor.sergeev
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@340921 91177308-0d34-0410-b5e6-96231b3b80d8
This is a bit awkward in a handful of places where we didn't even have
an instruction and now we have to see if we can build one. But on the
whole, this seems like a win and at worst a reasonable cost for removing
`TerminatorInst`.
All of this is part of the removal of `TerminatorInst` from the
`Instruction` type hierarchy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@340701 91177308-0d34-0410-b5e6-96231b3b80d8
`isExceptionalTermiantor` and implement it for opcodes as well following
the common pattern in `Instruction`.
Part of removing `TerminatorInst` from the `Instruction` type hierarchy
to make it easier to share logic and interfaces between instructions
that are both terminators and not terminators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@340699 91177308-0d34-0410-b5e6-96231b3b80d8
This patch makes the DoesKMove argument non-optional, to force people
to think about it. Most cases where it is false are either code hoisting
or code sinking, where we pick one instruction from a set of
equal instructions among different code paths.
Reviewers: dberlin, nlopes, efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D47475
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@340606 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch is the second in a series of patches related to the [[ http://lists.llvm.org/pipermail/llvm-dev/2018-June/123883.html | RFC - A new dominator tree updater for LLVM ]].
It converts passes (e.g. adce/jump-threading) and various functions which currently accept DDT in local.cpp and BasicBlockUtils.cpp to use the new DomTreeUpdater class.
These converted functions in utils can accept DomTreeUpdater with either UpdateStrategy and can deal with both DT and PDT held by the DomTreeUpdater.
Reviewers: brzycki, kuhar, dmgreen, grosser, davide
Reviewed By: brzycki
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48967
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338814 91177308-0d34-0410-b5e6-96231b3b80d8
There were a couple of issues reported (PR38047, PR37929) - I'll reland
the patch when I figure out and fix the rootcause.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336393 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When recording uses we need to rewrite after cloning a loop we need to
check if the use is not dominated by the original def. The initial
assumption was that the cloned basic block will introduce a new path and
thus the original def will only dominate the use if they are in the same
BB, but as the reproducer from PR37745 shows it's not always the case.
This fixes PR37745.
Reviewers: haicheng, Ka-Ka
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D48111
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335675 91177308-0d34-0410-b5e6-96231b3b80d8
Review feedback from r328165. Split out just the one function from the
file that's used by Analysis. (As chandlerc pointed out, the original
change only moved the header and not the implementation anyway - which
was fine for the one function that was used (since it's a
template/inlined in the header) but not in general)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333954 91177308-0d34-0410-b5e6-96231b3b80d8
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332240 91177308-0d34-0410-b5e6-96231b3b80d8
Stage3/stage4 bootstrap miscompares should be fixed by a non-determinism
fix in IDF (r332167).
This reverts commit r330446.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332168 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds a wrapper for std::distance() which works with ranges.
As it would be a common case to write `distance(predecessors(BB))`, this
also introduces `pred_size()` and `succ_size()` helpers to make that
easier to write.
Differential Revision: https://reviews.llvm.org/D46668
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332057 91177308-0d34-0410-b5e6-96231b3b80d8
phi is on lhs of a comparison op.
For the following testcase,
L1:
%t0 = add i32 %m, 7
%t3 = icmp eq i32* %t2, null
br i1 %t3, label %L3, label %L2
L2:
%t4 = load i32, i32* %t2, align 4
br label %L3
L3:
%t5 = phi i32 [ %t0, %L1 ], [ %t4, %L2 ]
%t6 = icmp eq i32 %t0, %t5
br i1 %t6, label %L4, label %L5
We know if we go through the path L1 --> L3, %t6 should always be true. However
currently, if the rhs of the eq comparison is phi, JumpThreading fails to
evaluate %t6 to true. And we know that Instcombine cannot guarantee always
canonicalizing phi to the left hand side of the comparison operation according
to the operand priority comparison mechanism in instcombine. The patch handles
the case when rhs of the comparison op is a phi.
Differential Revision: https://reviews.llvm.org/D46275
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331266 91177308-0d34-0410-b5e6-96231b3b80d8
Reapply the patches with a fix. Thanks Ilya and Hans for the reproducer!
This reverts commit r330416.
The issue was that removing predecessors invalidated uses that we stored
for rewrite. The fix is to finish manipulating with CFG before we select
uses for rewrite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@330431 91177308-0d34-0410-b5e6-96231b3b80d8
Revert r330413: "[SSAUpdaterBulk] Use SmallVector instead of DenseMap for storing rewrites."
Revert r330403 "Reapply "[PR16756] Use SSAUpdaterBulk in JumpThreading." one more time."
r330403 commit seems to crash clang during our integrate while doing PGO build with the following stacktrace:
#2 llvm::SSAUpdaterBulk::RewriteAllUses(llvm::DominatorTree*, llvm::SmallVectorImpl<llvm::PHINode*>*)
#3 llvm::JumpThreadingPass::ThreadEdge(llvm::BasicBlock*, llvm::SmallVectorImpl<llvm::BasicBlock*> const&, llvm::BasicBlock*)
#4 llvm::JumpThreadingPass::ProcessThreadableEdges(llvm::Value*, llvm::BasicBlock*, llvm::jumpthreading::ConstantPreference, llvm::Instruction*)
#5 llvm::JumpThreadingPass::ProcessBlock(llvm::BasicBlock*)
The crash happens while compiling 'lib/Analysis/CallGraph.cpp'.
r3340413 is reverted due to conflicting changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@330416 91177308-0d34-0410-b5e6-96231b3b80d8
Hopefully, changing set to vector removes nondeterminism detected by
some bots, or the new assert will catch something.
This reverts commit r330180.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@330403 91177308-0d34-0410-b5e6-96231b3b80d8
One more, hopefully the last, bug is fixed: when forming UsesToRewrite
we should ignore phi operands coming from edges that we want to delete.
This reverts r329910.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@330175 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
SSAUpdater is a bottleneck in JumpThreading, and this patch improves the
situation by using SSAUpdaterBulk instead.
Compile time impact: no noticable changes on CTMark, a big improvement
on the test from PR16756.
Reviewers: dberlin, davide, MatzeB
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D44282
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@329644 91177308-0d34-0410-b5e6-96231b3b80d8
In r312664 (D36404), JumpThreading stopped threading edges into
loop headers. Unfortunately, I observed a significant performance
regression as a result of this change. Upon further investigation,
the problematic pattern looked something like this (after
many high level optimizations):
while (true) {
bool cond = ...;
if (!cond) {
<body>
}
if (cond)
break;
}
Now, naturally we want jump threading to essentially eliminate the
second if check and hook up the edges appropriately. However, the
above mentioned change, prevented it from doing this because it would
have to thread an edge into the loop header.
Upon further investigation, what is happening is that since both branches
are threadable, JumpThreading picks one of them at arbitrarily. In my
case, because of the way that the IR ended up, it tended to pick
the one to the loop header, bailing out immediately after. However,
if it had picked the one to the exit block, everything would have
worked out fine (because the only remaining branch would then be folded,
not thraded which is acceptable).
Thus, to fix this problem, we can simply eliminate loop headers from
consideration as possible threading targets earlier, to make sure that
if there are multiple eligible branches, we can still thread one of
the ones that don't target a loop header.
Patch by Keno Fischer!
Differential Revision: https://reviews.llvm.org/D42260
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328798 91177308-0d34-0410-b5e6-96231b3b80d8
Remove #include of Transforms/Scalar.h from Transform/Utils to fix layering.
Transforms depends on Transforms/Utils, not the other way around. So
remove the header and the "createStripGCRelocatesPass" function
declaration (& definition) that is unused and motivated this dependency.
Move Transforms/Utils/Local.h into Analysis because it's used by
Analysis/MemoryBuiltins.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328165 91177308-0d34-0410-b5e6-96231b3b80d8
