The 1st attempt at this modified the cost model in a bad way to avoid the vectorization,
but that caused problems for other users (the loop vectorizer) of the cost model.
I don't see an ideal solution to these 2 related, potentially large, perf regressions:
https://bugs.llvm.org/show_bug.cgi?id=42708https://bugs.llvm.org/show_bug.cgi?id=43146
We decided that load combining was unsuitable for IR because it could obscure other
optimizations in IR. So we removed the LoadCombiner pass and deferred to the backend.
Therefore, preventing SLP from destroying load combine opportunities requires that it
recognizes patterns that could be combined later, but not do the optimization itself (
it's not a vector combine anyway, so it's probably out-of-scope for SLP).
Here, we add a cost-independent bailout with a conservative pattern match for a
multi-instruction sequence that can probably be reduced later.
In the x86 tests shown (and discussed in more detail in the bug reports), SDAG combining
will produce a single instruction on these tests like:
movbe rax, qword ptr [rdi]
or:
mov rax, qword ptr [rdi]
Not some (half) vector monstrosity as we currently do using SLP:
vpmovzxbq ymm0, dword ptr [rdi + 1] # ymm0 = mem[0],zero,zero,..
vpsllvq ymm0, ymm0, ymmword ptr [rip + .LCPI0_0]
movzx eax, byte ptr [rdi]
movzx ecx, byte ptr [rdi + 5]
shl rcx, 40
movzx edx, byte ptr [rdi + 6]
shl rdx, 48
or rdx, rcx
movzx ecx, byte ptr [rdi + 7]
shl rcx, 56
or rcx, rdx
or rcx, rax
vextracti128 xmm1, ymm0, 1
vpor xmm0, xmm0, xmm1
vpshufd xmm1, xmm0, 78 # xmm1 = xmm0[2,3,0,1]
vpor xmm0, xmm0, xmm1
vmovq rax, xmm0
or rax, rcx
vzeroupper
ret
Differential Revision: https://reviews.llvm.org/D67841
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@375025 91177308-0d34-0410-b5e6-96231b3b80d8
In loop-vectorize, interleave count and vector factor depend on target register number. Currently, it does not
estimate different register pressure for different register class separately(especially for scalar type,
float type should not be on the same position with int type), so it's not accurate. Specifically,
it causes too many times interleaving/unrolling, result in too many register spills in loop body and hurting performance.
So we need classify the register classes in IR level, and importantly these are abstract register classes,
and are not the target register class of backend provided in td file. It's used to establish the mapping between
the types of IR values and the number of simultaneous live ranges to which we'd like to limit for some set of those types.
For example, POWER target, register num is special when VSX is enabled. When VSX is enabled, the number of int scalar register is 32(GPR),
float is 64(VSR), but for int and float vector register both are 64(VSR). So there should be 2 kinds of register class when vsx is enabled,
and 3 kinds of register class when VSX is NOT enabled.
It runs on POWER target, it makes big(+~30%) performance improvement in one specific bmk(503.bwaves_r) of spec2017 and no other obvious degressions.
Differential revision: https://reviews.llvm.org/D67148
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374634 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a moveAfter method to VPRecipeBase, which can be used to
move elements after other elements, across VPBasicBlocks, if necessary.
Reviewers: dcaballe, hsaito, rengolin, hfinkel
Reviewed By: dcaballe
Differential Revision: https://reviews.llvm.org/D46825
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374565 91177308-0d34-0410-b5e6-96231b3b80d8
This is just small refactoring to minimize changes in upcoming patch.
In the next path I'm going to introduce changes into heuristic for vectorization of "tiny trip count" loops.
Patch by Evgeniy Brevnov <evgueni.brevnov@gmail.com>
Reviewers: hsaito, Ayal, fhahn, reames
Reviewed By: hsaito
Differential Revision: https://reviews.llvm.org/D67690
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374338 91177308-0d34-0410-b5e6-96231b3b80d8
We failed to account for the target register width (max vector factor)
when vectorizing starting from GEPs. This causes vectorization to
proceed to obviously illegal widths as in:
https://bugs.llvm.org/show_bug.cgi?id=43578
For x86, this also means that SLP can produce rogue AVX or AVX512
code even when the user specifies a narrower vector width.
The AArch64 test in ext-trunc.ll appears to be better using the
narrower width. I'm not exactly sure what getelementptr.ll is trying
to do, but it's testing with "-slp-threshold=-18", so I'm not worried
about those diffs. The x86 test is an over-reduction from SPEC h264;
this patch appears to restore the perf loss caused by SLP when using
-march=haswell.
Differential Revision: https://reviews.llvm.org/D68667
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374183 91177308-0d34-0410-b5e6-96231b3b80d8
When optimising for size and SCEV runtime checks need to be emitted to check
overflow behaviour, the loop vectorizer can run in this assert:
LoopVectorize.cpp:2699: void llvm::InnerLoopVectorizer::emitSCEVChecks(
llvm::Loop *, llvm::BasicBlock *): Assertion `!BB->getParent()->hasOptSize()
&& "Cannot SCEV check stride or overflow when opt
We should not generate predicates while optimising for size because
code will be generated for predicates such as these SCEV overflow runtime
checks.
This should fix PR43371.
Differential Revision: https://reviews.llvm.org/D68082
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374166 91177308-0d34-0410-b5e6-96231b3b80d8
Also Revert "[LoopVectorize] Fix non-debug builds after rL374017"
This reverts commit 9f41deccc0e648a006c9f38e11919f181b6c7e0a.
This reverts commit 18b6fe07bcf44294f200bd2b526cb737ed275c04.
The patch is breaking PowerPC internal build, checked with author, reverting
on behalf of him for now due to timezone.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374091 91177308-0d34-0410-b5e6-96231b3b80d8
In loop-vectorize, interleave count and vector factor depend on target register number. Currently, it does not
estimate different register pressure for different register class separately(especially for scalar type,
float type should not be on the same position with int type), so it's not accurate. Specifically,
it causes too many times interleaving/unrolling, result in too many register spills in loop body and hurting performance.
So we need classify the register classes in IR level, and importantly these are abstract register classes,
and are not the target register class of backend provided in td file. It's used to establish the mapping between
the types of IR values and the number of simultaneous live ranges to which we'd like to limit for some set of those types.
For example, POWER target, register num is special when VSX is enabled. When VSX is enabled, the number of int scalar register is 32(GPR),
float is 64(VSR), but for int and float vector register both are 64(VSR). So there should be 2 kinds of register class when vsx is enabled,
and 3 kinds of register class when VSX is NOT enabled.
It runs on POWER target, it makes big(+~30%) performance improvement in one specific bmk(503.bwaves_r) of spec2017 and no other obvious degressions.
Differential revision: https://reviews.llvm.org/D67148
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374017 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts SVN r373833, as it caused a failed assert "Non-zero loop
cost expected" on building numerous projects, see PR43582 for details
and reproduction samples.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@373882 91177308-0d34-0410-b5e6-96231b3b80d8
I don't see an ideal solution to these 2 related, potentially large, perf regressions:
https://bugs.llvm.org/show_bug.cgi?id=42708https://bugs.llvm.org/show_bug.cgi?id=43146
We decided that load combining was unsuitable for IR because it could obscure other
optimizations in IR. So we removed the LoadCombiner pass and deferred to the backend.
Therefore, preventing SLP from destroying load combine opportunities requires that it
recognizes patterns that could be combined later, but not do the optimization itself (
it's not a vector combine anyway, so it's probably out-of-scope for SLP).
Here, we add a scalar cost model adjustment with a conservative pattern match and cost
summation for a multi-instruction sequence that can probably be reduced later.
This should prevent SLP from creating a vector reduction unless that sequence is
extremely cheap.
In the x86 tests shown (and discussed in more detail in the bug reports), SDAG combining
will produce a single instruction on these tests like:
movbe rax, qword ptr [rdi]
or:
mov rax, qword ptr [rdi]
Not some (half) vector monstrosity as we currently do using SLP:
vpmovzxbq ymm0, dword ptr [rdi + 1] # ymm0 = mem[0],zero,zero,..
vpsllvq ymm0, ymm0, ymmword ptr [rip + .LCPI0_0]
movzx eax, byte ptr [rdi]
movzx ecx, byte ptr [rdi + 5]
shl rcx, 40
movzx edx, byte ptr [rdi + 6]
shl rdx, 48
or rdx, rcx
movzx ecx, byte ptr [rdi + 7]
shl rcx, 56
or rcx, rdx
or rcx, rax
vextracti128 xmm1, ymm0, 1
vpor xmm0, xmm0, xmm1
vpshufd xmm1, xmm0, 78 # xmm1 = xmm0[2,3,0,1]
vpor xmm0, xmm0, xmm1
vmovq rax, xmm0
or rax, rcx
vzeroupper
ret
Differential Revision: https://reviews.llvm.org/D67841
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@373833 91177308-0d34-0410-b5e6-96231b3b80d8
Initially SLP vectorizer replaced all going-to-be-vectorized
instructions with Undef values. It may break ScalarEvaluation and may
cause a crash.
Reworked SLP vectorizer so that it does not replace vectorized
instructions by UndefValue anymore. Instead vectorized instructions are
marked for deletion inside if BoUpSLP class and deleted upon class
destruction.
Reviewers: mzolotukhin, mkuper, hfinkel, RKSimon, davide, spatel
Subscribers: RKSimon, Gerolf, anemet, hans, majnemer, llvm-commits, sanjoy
Differential Revision: https://reviews.llvm.org/D29641
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@373166 91177308-0d34-0410-b5e6-96231b3b80d8
The static analyzer is warning about a potential null dereference, but we should be able to use cast<CmpInst> directly and if not assert will fire for us.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372732 91177308-0d34-0410-b5e6-96231b3b80d8
When vectorisation is forced with a pragma, we optimise for min size, and we
need to emit runtime memory checks, then allow this code growth and don't run
in an assert like we currently do.
This is the result of D65197 and D66803, and was a use-case not really
considered before. If this now happens, we emit an optimisation remark warning
about the code-size expansion, which can be avoided by not forcing
vectorisation or possibly source-code modifications.
Differential Revision: https://reviews.llvm.org/D67764
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372694 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Initially SLP vectorizer replaced all going-to-be-vectorized
instructions with Undef values. It may break ScalarEvaluation and may
cause a crash.
Reworked SLP vectorizer so that it does not replace vectorized
instructions by UndefValue anymore. Instead vectorized instructions are
marked for deletion inside if BoUpSLP class and deleted upon class
destruction.
Reviewers: mzolotukhin, mkuper, hfinkel, RKSimon, davide, spatel
Subscribers: RKSimon, Gerolf, anemet, hans, majnemer, llvm-commits, sanjoy
Differential Revision: https://reviews.llvm.org/D29641
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372626 91177308-0d34-0410-b5e6-96231b3b80d8
The static analyzer is warning about potential null dereferences of dyn_cast<> results, we can use cast<> directly as we know that these cases should all be CastInst, which is why its working atm and anyway cast<> will assert if they aren't.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@372116 91177308-0d34-0410-b5e6-96231b3b80d8
The static analyzer is warning about a potential null dereference of the cast_or_null result, I've split the cast_or_null check from the ->getUnderlyingInstr() call to avoid this, but it appears that we weren't seeing any null pointers in the dumped bundles in the first place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@371975 91177308-0d34-0410-b5e6-96231b3b80d8
The static analyzer is warning about potential null dereferences of dyn_cast<> results - in these cases we can safely use cast<> directly as we know that these cases should all be the correct type, which is why its working atm and anyway cast<> will assert if they aren't.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@371973 91177308-0d34-0410-b5e6-96231b3b80d8
Silence static analyzer uninitialized variable warning by setting the LoadTy to null and then asserting we find a real value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@371936 91177308-0d34-0410-b5e6-96231b3b80d8
This is a fix for:
https://bugs.llvm.org/show_bug.cgi?id=33958
It seems universally true that we would not want to transform this kind of
sequence on any target, but if that's not correct, then we could view this
as a target-specific cost model problem. We could also white-list ConstantInt,
ConstantFP, etc. rather than blacklist Global and ConstantExpr.
Differential Revision: https://reviews.llvm.org/D67362
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@371931 91177308-0d34-0410-b5e6-96231b3b80d8
Expose a utility function so that all places which want to suppress speculation (when otherwise legal) due to ordering and/or sanitizer interaction can do so.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@371556 91177308-0d34-0410-b5e6-96231b3b80d8
If we're vectorizing a load in a predicated block, check to see if the load can be speculated rather than predicated. This allows us to generate a normal vector load instead of a masked.load.
To do so, we must prove that all bytes accessed on any iteration of the original loop are dereferenceable, and that all loads (across all iterations) are properly aligned. This is equivelent to proving that hoisting the load into the loop header in the original scalar loop is safe.
Note: There are a couple of code motion todos in the code. My intention is to wait about a day - to be sure this sticks - and then perform the NFC motion without furthe review.
Differential Revision: https://reviews.llvm.org/D66688
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@371452 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is the first change to enable the TLI to be built per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
This change should not affect behavior, as the provided function is not
yet used to build a specifically per-function TLI, but rather enables
that migration.
Most of the changes were very mechanical, e.g. passing a Function to the
legacy analysis pass's getTLI interface, or in Module level cases,
adding a callback. This is similar to the way the per-function TTI
analysis works.
There was one place where we were looking for builtins but not in the
context of a specific function. See FindCXAAtExit in
lib/Transforms/IPO/GlobalOpt.cpp. I'm somewhat concerned my workaround
could provide the wrong behavior in some corner cases. Suggestions
welcome.
Reviewers: chandlerc, hfinkel
Subscribers: arsenm, dschuff, jvesely, nhaehnle, mehdi_amini, javed.absar, sbc100, jgravelle-google, eraman, aheejin, steven_wu, george.burgess.iv, dexonsmith, jfb, asbirlea, gchatelet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66428
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@371284 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Fold-tail currently supports reduction last-vector-value live-out's,
but has yet to support last-scalar-value live-outs, including
non-header phi's. As it relies on AllowedExit in order to detect
them and bail out we need to add the non-header PHI nodes to
AllowedExit, otherwise we end up with miscompiles.
Solves https://bugs.llvm.org/show_bug.cgi?id=43166
Reviewers: fhahn, Ayal
Reviewed By: fhahn, Ayal
Subscribers: anna, hiraditya, rkruppe, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67074
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@370721 91177308-0d34-0410-b5e6-96231b3b80d8
Allow vectorizing loops that have reductions when tail is folded by masking.
A select is introduced in VPlan, choosing between the last value carried by the
loop-exit/live-out instruction of the reduction, and the penultimate value
carried by the reduction phi, according to the "i < n" mask of fold-tail.
This select replaces the last value as the live-out value of the loop.
Differential Revision: https://reviews.llvm.org/D66720
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@370173 91177308-0d34-0410-b5e6-96231b3b80d8
These are part of D57059, but that patch doesn't apply cleanly to trunk
at this point, so we might as well remove some of the noise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@369776 91177308-0d34-0410-b5e6-96231b3b80d8
These are part of D57059, but that patch doesn't apply cleanly to trunk
at this point, so we might as well remove some of the noise.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@369769 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The scheduler's dependence graph gets the use-def dependencies by accessing the operands of the instructions in a bundle. However, buildTree_rec() may change the order of the operands in TreeEntry, and the scheduler is currently not aware of this. This is not causing any functional issues currently, because reordering is restricted to the operands of a single instruction. Once we support operand reordering across multiple TreeEntries, as shown here: http://www.llvm.org/devmtg/2019-04/slides/Poster-Porpodas-Supernode_SLP.pdf , the scheduler will need to get the correct operands from TreeEntry and not from the individual instructions.
In short, this patch:
- Connects the scheduler's bundle with the corresponding TreeEntry. It introduces new TE and Lane fields in ScheduleData.
- Moves the location where the operands of the TreeEntry are initialized. This used to take place in newTreeEntry() setting one operand at a time, but is now moved pre-order just before the recursion of buildTree_rec(). This is required because the scheduler needs to access both operands of the TreeEntry in tryScheduleBundle().
- Updates the scheduler to access the instruction operands through the TreeEntry operands instead of accessing the instruction operands directly.
Reviewers: ABataev, RKSimon, dtemirbulatov, Ayal, dorit, hfinkel
Reviewed By: ABataev
Subscribers: hiraditya, llvm-commits, lebedev.ri, rcorcs
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62432
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@369131 91177308-0d34-0410-b5e6-96231b3b80d8
cppcheck + MSVC analyzer both over zealously warn that we might dereference a null Bundle pointer - add an assertion to check for null to silence the warning, plus its a good idea to check that we succeeded in finding a schedule bundle anyway....
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@369094 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@369013 91177308-0d34-0410-b5e6-96231b3b80d8
