An alloca which can be sunk into the extraction region may have more
than one bitcast use. Move these uses along with the alloca to prevent
use-before-def.
Testing: check-llvm, stage2 build of clang
Fixes llvm.org/PR42451.
Differential Revision: https://reviews.llvm.org/D64463
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@365660 91177308-0d34-0410-b5e6-96231b3b80d8
As it's causing some bot failures (and per request from kbarton).
This reverts commit r358543/ab70da07286e618016e78247e4a24fcb84077fda.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358546 91177308-0d34-0410-b5e6-96231b3b80d8
If a lifetime.end marker occurs along one path through the extraction
region, but not another, then it's still incorrect to lift the marker,
because there is some path through the extracted function which would
ordinarily not reach the marker. If the call to the extracted function
is in a loop, unrolling can cause inputs to the function to become
optimized out as undef after the first iteration.
To prevent incorrect stack slot merging in the calling function, it
should be sufficient to lift lifetime.start markers for region inputs.
I've tested this theory out by doing a stage2 check-all with randomized
splitting enabled.
This is a follow-up to r353973, and there's additional context for this
change in https://reviews.llvm.org/D57834.
rdar://47896986
Differential Revision: https://reviews.llvm.org/D58253
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@354159 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Assumption cache's self-updating mechanism does not correctly handle the case when blocks are extracted from the function by the CodeExtractor. As a result function's assumption cache may have stale references to the llvm.assume calls that were moved to the outlined function. This patch fixes this problem by removing extracted llvm.assume calls from the function’s assumption cache.
Reviewers: hfinkel, vsk, fhahn, davidxl, sanjoy
Reviewed By: hfinkel, vsk
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57215
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353500 91177308-0d34-0410-b5e6-96231b3b80d8
CodeExtractor permits extracting a region of blocks from a function even
when values defined within the region are used outside of it.
This is typically done by creating an alloca in the original function
and reloading the alloca after a call to the extracted function.
Wrap the reload in lifetime start/end markers to promote stack coloring.
Suggested by Sergei Kachkov!
Differential Revision: https://reviews.llvm.org/D56045
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351621 91177308-0d34-0410-b5e6-96231b3b80d8
Lifetime markers which reference inputs to the extraction region are not
safe to extract. Example ('rhs' will be extracted):
```
entry:
+------------+
| x = alloca |
| y = alloca |
+------------+
/ \
lhs: rhs:
+-------------------+ +-------------------+
| lifetime_start(x) | | lifetime_start(x) |
| use(x) | | lifetime_start(y) |
| lifetime_end(x) | | use(x, y) |
| lifetime_start(y) | | lifetime_end(y) |
| use(y) | | lifetime_end(x) |
| lifetime_end(y) | +-------------------+
+-------------------+
```
Prior to extraction, the stack coloring pass sees that the slots for 'x'
and 'y' are in-use at the same time. After extraction, the coloring pass
infers that 'x' and 'y' are *not* in-use concurrently, because markers
from 'rhs' are no longer available to help decide otherwise.
This leads to a miscompile, because the stack slots actually are in-use
concurrently in the extracted function.
Fix this by moving lifetime start/end markers for memory regions defined
in the calling function around the call to the extracted function.
Fixes llvm.org/PR39671 (rdar://45939472).
Differential Revision: https://reviews.llvm.org/D55967
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@350420 91177308-0d34-0410-b5e6-96231b3b80d8
InlineCost also treats them as free and the current implementation
can cause assertion failures if PHI nodes are moved outside the region
from entry BBs to the region.
It also updates the code to use the instructionsWithoutDebug iterator.
Reviewers: davidxl, davide, vsk, graham-yiu-huawei
Reviewed By: davidxl
Differential Revision: https://reviews.llvm.org/D54748
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@347683 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The current default of appending "_"+entry block label to the new
extracted cold function breaks demangling. Change the deliminator from
"_" to "." to enable demangling. Because the header block label will
be empty for release compile code, use "extracted" after the "." when
the label is empty.
Additionally, add a mechanism for the client to pass in an alternate
suffix applied after the ".", and have the hot cold split pass use
"cold."+Count, where the Count is currently 1 but can be used to
uniquely number multiple cold functions split out from the same function
with D53588.
Reviewers: sebpop, hiraditya
Subscribers: llvm-commits, erik.pilkington
Differential Revision: https://reviews.llvm.org/D53534
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@345178 91177308-0d34-0410-b5e6-96231b3b80d8
Currently CodeExtractor tries to use the next node after an invoke to
place the store for the result of the invoke, if it is an out parameter
of the region. This fails, as the invoke terminates the current BB.
In that case, we can place the store in the 'normal destination' BB, as
the result will only be available in that case.
Reviewers: davidxl, davide, efriedma
Reviewed By: davidxl
Differential Revision: https://reviews.llvm.org/D51037
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@340331 91177308-0d34-0410-b5e6-96231b3b80d8
This is a CodeExtractor improvement which adds support for extracting blocks
which have exception handling constructs if that is legal to do. CodeExtractor
performs validation checks to ensure that extraction is legal when it finds
invoke instructions or EH pads (landingpad, catchswitch, or cleanuppad) in
blocks to be extracted.
I have also added an option to allow extraction of blocks with alloca
instructions, but no validation is done for allocas. CodeExtractor caller has
to validate it himself before allowing alloca instructions to be extracted.
By default allocas are still not allowed in extraction blocks.
Differential Revision: https://reviews.llvm.org/D45904
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332151 91177308-0d34-0410-b5e6-96231b3b80d8
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331841 91177308-0d34-0410-b5e6-96231b3b80d8
The callback used to create an ORE for the legacy PI pass caches the allocated
object in a unique_ptr in the runOnModule function, and returns a reference to
that object. Under certian circumstances we can end up holding onto that
reference after the OREs destruction. Rather then allowing the new and legacy
passes to create ORE object in diffrent ways, create the ORE at the point of
use.
Differential Revision: https://reviews.llvm.org/D43219
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@330473 91177308-0d34-0410-b5e6-96231b3b80d8
Use isInlineViable to prevent inlining of functions with non-inlinable
constructs, in case cost analysis is skipped.
Reviewers: efriedma, sfertile, davide, davidxl
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D42846
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@327207 91177308-0d34-0410-b5e6-96231b3b80d8
When using the partial inliner, we might have attributes for forwarded
varargs, but the CodeExtractor does not create an empty argument
attribute set for regular arguments in that case, because it does not know
of the additional arguments. So in case we have attributes for VarArgs, we
also have to make sure we create (empty) attributes for all regular arguments.
This fixes PR36210.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@324197 91177308-0d34-0410-b5e6-96231b3b80d8
In addition to target-dependent attributes, we can also preserve a
white-listed subset of target independent function attributes. The white-list
excludes problematic attributes, most prominently:
* attributes related to memory accesses, as alloca instructions
could be moved in/out of the extracted block
* control-flow dependent attributes, like no_return or thunk, as the
relerelevant instructions might or might not get extracted.
Thanks @efriedma and @aemerson for providing a set of attributes that cannot be
propagated.
Reviewers: efriedma, davidxl, davide, silvas
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D41334
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@321961 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If a partially inlined function has debug info, we have to add debug
locations to the call instruction calling the outlined function.
We use the debug location of the first instruction in the outlined
function, as the introduced call transfers control to this statement and
there is no other equivalent line in the source code.
We also use the same debug location for the branch instruction added
to jump from artificial entry block for the outlined function, which just
jumps to the first actual basic block of the outlined function.
Reviewers: davide, aprantl, rriddle, dblaikie, danielcdh, wmi
Reviewed By: aprantl, rriddle, danielcdh
Subscribers: eraman, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D40413
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320199 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch extends the partial inliner to support inlining parts of
vararg functions, if the vararg handling is done in the outlined part.
It adds a `ForwardVarArgsTo` argument to InlineFunction. If it is
non-null, all varargs passed to the inlined function will be added to
all calls to `ForwardVarArgsTo`.
The partial inliner takes care to only pass `ForwardVarArgsTo` if the
varargs handing is done in the outlined function. It checks that vastart
is not part of the function to be inlined.
`test/Transforms/CodeExtractor/PartialInlineNoInline.ll` (already part
of the repo) checks we do not do partial inlining if vastart is used in
a basic block that will be inlined.
Reviewers: davide, davidxl, grosser
Reviewed By: davide, davidxl, grosser
Subscribers: gyiu, grosser, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D39607
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318028 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
InlineFunction can fail, for example when trying to inline vararg
fuctions. In those cases, we do not want to bump partial inlining
counters or set AnyInlined to true, because this could leave an unused
function hanging around.
Reviewers: davidxl, davide, gyiu
Reviewed By: davide
Subscribers: llvm-commits, eraman
Differential Revision: https://reviews.llvm.org/D39581
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317314 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
By replacing branches to CommonExitBlock, we remove the node from
CommonExitBlock's predecessors, invalidating the iterator. The problem
is exposed when the common exit block has multiple predecessors and
needs to sink lifetime info. The modification in the test case trigger
the issue.
Reviewers: davidxl, davide, wmi
Reviewed By: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39112
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317084 91177308-0d34-0410-b5e6-96231b3b80d8
There are more bugs (runtime failures) triggered when partial
inlining is turned on. Add options to help triaging problems.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301148 91177308-0d34-0410-b5e6-96231b3b80d8
CodeExtractor looks up the dominator node corresponding to return blocks
when splitting them. If one of these blocks is unreachable, there's no
node in the Dom and CodeExtractor crashes because it doesn't check
for domtree node validity.
In theory, we could add just a check for skipping null DTNodes in
`splitReturnBlock` but the fix I propose here is slightly different. To the
best of my knowledge, unreachable blocks are irrelevant for the algorithm,
therefore we can just skip them when building the candidate set in the
constructor.
Differential Revision: https://reviews.llvm.org/D32335
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300946 91177308-0d34-0410-b5e6-96231b3b80d8
No bots have yelled yet, but this test references an x86 intrinsic.
Also, it invokes llc on x86 IR.
Fixup to r277315.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277316 91177308-0d34-0410-b5e6-96231b3b80d8
When extracting a set of blocks make sure to inherit all of the target
dependent attributes to make sure that the function will be valid for
lowering. One example is the "target-features" attribute for x86, if the
extracted region has functionality that relies on a specific feature it
will fail to be lowered.
This also allows for extracted functions to be valid for inlining, at
least back into the parent function, as the target attributes are tested
when inlining for compatibility.
Patch by River Riddle!
Differential Revision: https://reviews.llvm.org/D22713
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277315 91177308-0d34-0410-b5e6-96231b3b80d8
The personality routine currently lives in the LandingPadInst.
This isn't desirable because:
- All LandingPadInsts in the same function must have the same
personality routine. This means that each LandingPadInst beyond the
first has an operand which produces no additional information.
- There is ongoing work to introduce EH IR constructs other than
LandingPadInst. Moving the personality routine off of any one
particular Instruction and onto the parent function seems a lot better
than have N different places a personality function can sneak onto an
exceptional function.
Differential Revision: http://reviews.llvm.org/D10429
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239940 91177308-0d34-0410-b5e6-96231b3b80d8
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
- Instead of setting the suffixes in a bunch of places, just set one master
list in the top-level config. We now only modify the suffix list in a few
suites that have one particular unique suffix (.ml, .mc, .yaml, .td, .py).
- Aside from removing the need for a bunch of lit.local.cfg files, this enables
4 tests that were inadvertently being skipped (one in
Transforms/BranchFolding, a .s file each in DebugInfo/AArch64 and
CodeGen/PowerPC, and one in CodeGen/SI which is now failing and has been
XFAILED).
- This commit also fixes a bunch of config files to use config.root instead of
older copy-pasted code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188513 91177308-0d34-0410-b5e6-96231b3b80d8
Though I think it may be obsolete with the loop extract changes. And I couldn't
get the old version of LLVM to compile so that I could reduce this testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140197 91177308-0d34-0410-b5e6-96231b3b80d8
