For consistency with normal instructions and clarity when reading IR,
it's best to print the %0, %1, ... names of function arguments in
definitions.
Also modifies the parser to accept IR in that form for obvious reasons.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@367755 91177308-0d34-0410-b5e6-96231b3b80d8
unreachable loop.
updatePredecessorProfileMetadata in jumpthreading tries to find the
first dominating predecessor block for a PHI value by searching upwards
the predecessor block chain.
But jumpthreading may see some temporary IR state which contains
unreachable bb not being cleaned up. If an unreachable loop happens to
be on the predecessor block chain, keeping chasing the predecessor
block will run into an infinite loop.
The patch fixes it.
Differential Revision: https://reviews.llvm.org/D65310
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@367154 91177308-0d34-0410-b5e6-96231b3b80d8
If the block being cloned contains a PHI node, in general, we need to
clone that PHI node, even though it's trivial. If the operand of the PHI
is an instruction in the block being cloned, the correct value for the
operand doesn't exist until SSAUpdater constructs it.
We usually don't hit this issue because we try to avoid threading across
loop headers, but it's possible to hit this in some cases involving
irreducible CFGs. I added a flag to allow threading across loop headers
to make the testcase easier to understand.
Thanks to Brian Rzycki for reducing the testcase.
Fixes https://bugs.llvm.org/show_bug.cgi?id=42085.
Differential Revision: https://reviews.llvm.org/D63913
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@365094 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The return value of a TryToUnfoldSelect call was not checked, which led to an
incorrectly preserved loop info and some crash.
The original crash was reported on https://reviews.llvm.org/D59514.
Reviewers: davidxl, amehsan
Reviewed By: davidxl
Subscribers: fhahn, brzycki, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61920
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@360780 91177308-0d34-0410-b5e6-96231b3b80d8
As it's causing some bot failures (and per request from kbarton).
This reverts commit r358543/ab70da07286e618016e78247e4a24fcb84077fda.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358546 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes bug 40992: https://bugs.llvm.org/show_bug.cgi?id=40992
There is potential for miscompiled code emitted from JumpThreading when
analyzing a block with one or more indirectbr or callbr predecessors. The
ProcessThreadableEdges() function incorrectly folds conditional branches
into an unconditional branch.
This patch prevents incorrect branch folding without fully pessimizing
other potential threading opportunities through the same basic block.
This IR shape was manually fed in via opt and is unclear if clang and the
full pass pipeline will ever emit similar code shapes.
Thanks to Matthias Liedtke for the bug report and simplified IR example.
Differential Revision: https://reviews.llvm.org/D60284
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@357930 91177308-0d34-0410-b5e6-96231b3b80d8
These now verify that a given instruction has a specific source
location, rather than any old location. We want to make sure we
propagate the correct locations from one instruction to another.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356217 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes bug 37966: https://bugs.llvm.org/show_bug.cgi?id=37966
The Jump Threading pass will replace certain conditional branch
instructions with unconditional branches when it can prove that only one
branch can occur. Prior to this patch, it would not carry the debug
info from the old instruction to the new one.
This patch fixes the bug described by copying the debug info from the
conditional branch instruction to the new unconditional branch
instruction, and adds a regression test for the Jump Threading pass that
covers this case.
Patch by Stephen Tozer!
Differential Revision: https://reviews.llvm.org/D58963
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@355822 91177308-0d34-0410-b5e6-96231b3b80d8
This patch accompanies the RFC posted here:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/127239.html
This patch adds a new CallBr IR instruction to support asm-goto
inline assembly like gcc as used by the linux kernel. This
instruction is both a call instruction and a terminator
instruction with multiple successors. Only inline assembly
usage is supported today.
This also adds a new INLINEASM_BR opcode to SelectionDAG and
MachineIR to represent an INLINEASM block that is also
considered a terminator instruction.
There will likely be more bug fixes and optimizations to follow
this, but we felt it had reached a point where we would like to
switch to an incremental development model.
Patch by Craig Topper, Alexander Ivchenko, Mikhail Dvoretckii
Differential Revision: https://reviews.llvm.org/D53765
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353563 91177308-0d34-0410-b5e6-96231b3b80d8
Currently when a select has a constant value in one branch and the select feeds
a conditional branch (via a compare/ phi and compare) we unfold the select
statement. This results in threading the conditional branch later on. Similar
opportunity exists when a select (with a constant in one branch) feeds a
switch (via a phi node). The patch unfolds select under this condition.
A testcase is provided.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@350931 91177308-0d34-0410-b5e6-96231b3b80d8
ComputeValueKnownInPredecessors has a "visited" set to prevent infinite
loops, since a value can be visited more than once. However, the
implementation didn't prevent the algorithm from taking exponential
time. Instead of removing elements from the RecursionSet one at a time,
we should keep around the whole set until
ComputeValueKnownInPredecessors finishes, then discard it.
The testcase is synthetic because I was having trouble effectively
reducing the original. But it's basically the same idea.
Instead of failing, we could theoretically cache the result instead.
But I don't think it would help substantially in practice.
Differential Revision: https://reviews.llvm.org/D54239
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@346562 91177308-0d34-0410-b5e6-96231b3b80d8
As K has to dominate I, IIUC I's range metadata must be a subset of
K's. After Eli's recent clarification to the LangRef, loading a value
outside of the range is undefined behavior.
Therefore if I's range contains elements outside of K's range and we would load
one such value, K would cause undefined behavior.
In cases like hoisting/sinking, we still want the most generic range
over all code paths to/from the hoist/sink point. As suggested in the
patches related to D47339, I will refactor the handling of those
scenarios and try to decouple it from this function as follow up, once
we switched to a similar handling of metadata in most of
combineMetadata.
I updated some tests checking mostly the merging of metadata to keep the
metadata of to dominating load. The most interesting one is probably test8 in
test/Transforms/JumpThreading/thread-loads.ll. It contained a comment
about the alias metadata preventing us to eliminate the branch, but it
seem like the actual problem currently is that we merge the ranges of
both loads and cannot eliminate the icmp afterwards. With this patch, we
manage to eliminate the icmp, as the range of the first load excludes 8.
Reviewers: efriedma, nlopes, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D51629
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@345456 91177308-0d34-0410-b5e6-96231b3b80d8
This patch makes the DoesKMove argument non-optional, to force people
to think about it. Most cases where it is false are either code hoisting
or code sinking, where we pick one instruction from a set of
equal instructions among different code paths.
Reviewers: dberlin, nlopes, efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D47475
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@340606 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When recording uses we need to rewrite after cloning a loop we need to
check if the use is not dominated by the original def. The initial
assumption was that the cloned basic block will introduce a new path and
thus the original def will only dominate the use if they are in the same
BB, but as the reproducer from PR37745 shows it's not always the case.
This fixes PR37745.
Reviewers: haicheng, Ka-Ka
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D48111
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335675 91177308-0d34-0410-b5e6-96231b3b80d8
phi is on lhs of a comparison op.
For the following testcase,
L1:
%t0 = add i32 %m, 7
%t3 = icmp eq i32* %t2, null
br i1 %t3, label %L3, label %L2
L2:
%t4 = load i32, i32* %t2, align 4
br label %L3
L3:
%t5 = phi i32 [ %t0, %L1 ], [ %t4, %L2 ]
%t6 = icmp eq i32 %t0, %t5
br i1 %t6, label %L4, label %L5
We know if we go through the path L1 --> L3, %t6 should always be true. However
currently, if the rhs of the eq comparison is phi, JumpThreading fails to
evaluate %t6 to true. And we know that Instcombine cannot guarantee always
canonicalizing phi to the left hand side of the comparison operation according
to the operand priority comparison mechanism in instcombine. The patch handles
the case when rhs of the comparison op is a phi.
Differential Revision: https://reviews.llvm.org/D46275
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331266 91177308-0d34-0410-b5e6-96231b3b80d8
Reapply the patches with a fix. Thanks Ilya and Hans for the reproducer!
This reverts commit r330416.
The issue was that removing predecessors invalidated uses that we stored
for rewrite. The fix is to finish manipulating with CFG before we select
uses for rewrite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@330431 91177308-0d34-0410-b5e6-96231b3b80d8
Revert r330413: "[SSAUpdaterBulk] Use SmallVector instead of DenseMap for storing rewrites."
Revert r330403 "Reapply "[PR16756] Use SSAUpdaterBulk in JumpThreading." one more time."
r330403 commit seems to crash clang during our integrate while doing PGO build with the following stacktrace:
#2 llvm::SSAUpdaterBulk::RewriteAllUses(llvm::DominatorTree*, llvm::SmallVectorImpl<llvm::PHINode*>*)
#3 llvm::JumpThreadingPass::ThreadEdge(llvm::BasicBlock*, llvm::SmallVectorImpl<llvm::BasicBlock*> const&, llvm::BasicBlock*)
#4 llvm::JumpThreadingPass::ProcessThreadableEdges(llvm::Value*, llvm::BasicBlock*, llvm::jumpthreading::ConstantPreference, llvm::Instruction*)
#5 llvm::JumpThreadingPass::ProcessBlock(llvm::BasicBlock*)
The crash happens while compiling 'lib/Analysis/CallGraph.cpp'.
r3340413 is reverted due to conflicting changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@330416 91177308-0d34-0410-b5e6-96231b3b80d8
Hopefully, changing set to vector removes nondeterminism detected by
some bots, or the new assert will catch something.
This reverts commit r330180.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@330403 91177308-0d34-0410-b5e6-96231b3b80d8
One more, hopefully the last, bug is fixed: when forming UsesToRewrite
we should ignore phi operands coming from edges that we want to delete.
This reverts r329910.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@330175 91177308-0d34-0410-b5e6-96231b3b80d8
In r312664 (D36404), JumpThreading stopped threading edges into
loop headers. Unfortunately, I observed a significant performance
regression as a result of this change. Upon further investigation,
the problematic pattern looked something like this (after
many high level optimizations):
while (true) {
bool cond = ...;
if (!cond) {
<body>
}
if (cond)
break;
}
Now, naturally we want jump threading to essentially eliminate the
second if check and hook up the edges appropriately. However, the
above mentioned change, prevented it from doing this because it would
have to thread an edge into the loop header.
Upon further investigation, what is happening is that since both branches
are threadable, JumpThreading picks one of them at arbitrarily. In my
case, because of the way that the IR ended up, it tended to pick
the one to the loop header, bailing out immediately after. However,
if it had picked the one to the exit block, everything would have
worked out fine (because the only remaining branch would then be folded,
not thraded which is acceptable).
Thus, to fix this problem, we can simply eliminate loop headers from
consideration as possible threading targets earlier, to make sure that
if there are multiple eligible branches, we can still thread one of
the ones that don't target a loop header.
Patch by Keno Fischer!
Differential Revision: https://reviews.llvm.org/D42260
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328798 91177308-0d34-0410-b5e6-96231b3b80d8
JumpThreading iterates over F until the IR quiesces. Transforming
unreachable BBs increases compile time and it is also possible to
never stabilize causing JumpThreading to hang. An older attempt at
fixing this problem was D3991 where removeUnreachableBlocks(F)
was called before JumpThreading began. This has a few drawbacks:
* expensive - the routine attempts to fix up the IR to identify
additional BBs that can be removed along with unreachable BBs.
* aggressive - does not identify and preserve the shape of the IR.
At a minimum it does not preserve loop hierarchies.
* invasive - altering reachable blocks it may disrupt IR shapes
that could have otherwise been JumpThreaded.
This patch avoids removeUnreachableBlocks(F) and instead tracks
unreachable BBs in a SmallPtrSet using DominatorTree to validate the
initial state of all BBs. We then rely on subsequent passes to identify
and remove these unreachable blocks from F.
Reviewers: dberlin, sebpop, kuhar, dinesh.d
Reviewed by: sebpop, kuhar
Subscribers: hiraditya, uabelho, llvm-commits
Differential Revision: https://reviews.llvm.org/D44177
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@327713 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
It is possible for LVI to encounter instructions that are not in valid
SSA form and reference themselves. One example is the following:
%tmp4 = and i1 %tmp4, undef
Before this patch LVI would recurse until running out of stack memory
and crashed. This patch marks these self-referential instructions as
Overdefined and aborts analysis on the instruction.
Fixes https://bugs.llvm.org/show_bug.cgi?id=33357
Reviewers: craig.topper, anna, efriedma, dberlin, sebpop, kuhar
Reviewed by: dberlin
Subscribers: uabelho, spatel, a.elovikov, fhahn, eli.friedman, mzolotukhin, spop, evandro, davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D34135
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@327432 91177308-0d34-0410-b5e6-96231b3b80d8
In r263618, JumpThreading learned to look trough simple cast instructions, but
only if the source of those cast instructions was a phi/cmp i1 (in an effort to
limit compile time effects). I think this condition is too restrictive. For
switches with limited value range, InstCombine will readily introduce an extra
trunc instruction to a smaller integer type (e.g. from i8 to i2), leaving us in
the somewhat perverse situation that jump-threading would work before running
instcombine, but not after. Since instcombine produces this pattern, I think we
need to consider it canonical and support it in JumpThreading. In general,
for limiting recursion, I think the existing restriction to phi and cmp nodes
should be sufficient to avoid looking through unprofitable chains of
instructions.
Patch by Keno Fischer!
Differential Revision: https://reviews.llvm.org/D42262
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@327150 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The LazyValueInfo pass caches a copy of the DominatorTree when available.
Whenever there are pending DominatorTree updates within JumpThreading's
DeferredDominance object we cannot use the cached DT for LVI analysis.
This commit adds the new methods enableDT() and disableDT() to LVI.
JumpThreading also sets the appropriate usage model before calling LVI
analysis methods.
Fixes https://bugs.llvm.org/show_bug.cgi?id=36133
Reviewers: sebpop, dberlin, kuhar
Reviewed by: sebpop, kuhar
Subscribers: uabelho, llvm-commits, aprantl, hiraditya, a.elovikov
Differential Revision: https://reviews.llvm.org/D42717
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@325356 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch attempts to fix the DomTree incremental insertion bug found here [[ https://bugs.llvm.org/show_bug.cgi?id=35969 | PR35969 ]] .
When performing an insertion into a piece of unreachable CFG, we may find the same not at different levels. When this happens, the node can turn out to be affected when we find it starting from a node with a lower level in the tree. The level at which we start visitation affects if we consider a node affected or not.
This patch tracks the lowest level at which each node was visited during insertion and allows it to be visited multiple times, if it can cause it to be considered affected.
Reviewers: brzycki, davide, dberlin, grosser
Reviewed By: brzycki
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42231
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@322993 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
See D37528 for a previous (non-deferred) version of this
patch and its description.
Preserves dominance in a deferred manner using a new class
DeferredDominance. This reduces the performance impact of
updating the DominatorTree at every edge insertion and
deletion. A user may call DDT->flush() within JumpThreading
for an up-to-date DT. This patch currently has one flush()
at the end of runImpl() to ensure DT is preserved across
the pass.
LVI is also preserved to help subsequent passes such as
CorrelatedValuePropagation. LVI is simpler to maintain and
is done immediately (not deferred). The code to perform the
preversation was minimally altered and simply marked as
preserved for the PassManager to be informed.
This extends the analysis available to JumpThreading for
future enhancements such as threading across loop headers.
Reviewers: dberlin, kuhar, sebpop
Reviewed By: kuhar, sebpop
Subscribers: mgorny, dmgreen, kuba, rnk, rsmith, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D40146
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@322401 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
See D37528 for a previous (non-deferred) version of this
patch and its description.
Preserves dominance in a deferred manner using a new class
DeferredDominance. This reduces the performance impact of
updating the DominatorTree at every edge insertion and
deletion. A user may call DDT->flush() within JumpThreading
for an up-to-date DT. This patch currently has one flush()
at the end of runImpl() to ensure DT is preserved across
the pass.
LVI is also preserved to help subsequent passes such as
CorrelatedValuePropagation. LVI is simpler to maintain and
is done immediately (not deferred). The code to perfom the
preversation was minimally altered and was simply marked
as preserved for the PassManager to be informed.
This extends the analysis available to JumpThreading for
future enhancements. One example is loop boundary threading.
Reviewers: dberlin, kuhar, sebpop
Reviewed By: kuhar, sebpop
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D40146
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@321825 91177308-0d34-0410-b5e6-96231b3b80d8
PRE in JumpThreading should not be able to hoist copy of non-speculable loads across
instructions that don't always transfer execution to their successors, otherwise they may
introduce an unsafe load which otherwise would not be executed.
The same problem for GVN was fixed as rL316975.
Differential Revision: https://reviews.llvm.org/D40347
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@321063 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
See D37528 for a previous (non-deferred) version of this
patch and its description.
Preserves dominance in a deferred manner using a new class
DeferredDominance. This reduces the performance impact of
updating the DominatorTree at every edge insertion and
deletion. A user may call DDT->flush() within JumpThreading
for an up-to-date DT. This patch currently has one flush()
at the end of runImpl() to ensure DT is preserved across
the pass.
LVI is also preserved to help subsequent passes such as
CorrelatedValuePropagation. LVI is simpler to maintain and
is done immediately (not deferred). The code to perfom the
preversation was minimally altered and was simply marked
as preserved for the PassManager to be informed.
This extends the analysis available to JumpThreading for
future enhancements. One example is loop boundary threading.
Reviewers: dberlin, kuhar, sebpop
Reviewed By: kuhar, sebpop
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D40146
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320612 91177308-0d34-0410-b5e6-96231b3b80d8
Consider this type of a loop:
for (...) {
...
if (...) continue;
...
}
Normally, the "continue" would branch to the loop control code that
checks whether the loop should continue iterating and which contains
the (often) unique loop latch branch. In certain cases jump threading
can "thread" the inner branch directly to the loop header, creating
a second loop latch. Loop canonicalization would then transform this
loop into a loop nest. The problem with this is that in such a loop
nest neither loop is countable even if the original loop was. This
may inhibit subsequent loop optimizations and be detrimental to
performance.
Differential Revision: https://reviews.llvm.org/D36404
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312664 91177308-0d34-0410-b5e6-96231b3b80d8
JumpThreading claims to preserve LVI, but it doesn't preserve
the analyses which LVI holds a reference to (e.g. the Dominator).
In the current pass manager infrastructure, after JT runs, the
PM frees these analyses (including DominatorTree) but preserves
LVI.
CorrelatedValuePropagation runs immediately after and queries
a corrupted domtree, causing weird miscompiles.
This commit disables the preservation of LVI for the time being.
Eventually, we should either move LVI to a proper dependency
tracking mechanism (i.e. an analyses shouldn't hold references
to other analyses and compute them on demand if needed), or
we should teach all the passes preserving LVI to preserve the
analyses LVI depends on.
The new pass manager has a mechanism to invalidate LVI in case
one of the analyses it depends on becomes invalid, so this problem
shouldn't exist (at least not in this immediate form), but handling
of analyses holding references is still a very delicate subject.
Fixes PR33917 (and rustc).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309355 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When simplifying unconditional branches from empty blocks, we pre-test if the
BB belongs to a set of loop headers and keep the block to prevent passes from
destroying canonical loop structure. However, the current algorithm fails if
the destination of the branch is a loop header. Especially when such a loop's
latch block is folded into loop header it results in additional backedges and
LoopSimplify turns it into a nested loop which prevent later optimizations
from being applied (e.g., loop unrolling and loop interleaving).
This patch augments the existing algorithm by further checking if the
destination of the branch belongs to a set of loop headers and defer
eliminating it if yes to LateSimplifyCFG.
Fixes PR33605: https://bugs.llvm.org/show_bug.cgi?id=33605
Reviewers: efriedma, mcrosier, pacxx, hsung, davidxl
Reviewed By: efriedma
Subscribers: ashutosh.nema, gberry, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D35411
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308422 91177308-0d34-0410-b5e6-96231b3b80d8
Add the following pattern to TryToUnfoldSelectInCurrBB()
bb:
%p = phi [0, %bb1], [1, %bb2], [0, %bb3], [1, %bb4], ...
%c = cmp %p, 0
%s = select %c, trueval, falseval
The Select in the above pattern will be unfolded and then jump-threaded. The
current implementation does not allow CMP in the middle of PHI and Select.
Differential Revision: https://reviews.llvm.org/D34762
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308050 91177308-0d34-0410-b5e6-96231b3b80d8
This patch builds over https://reviews.llvm.org/rL303349 and replaces
the use of the condition only if it is safe to do so.
We should not blindly RAUW the condition if experimental.guard or assume
is a use of that
condition. This is because LVI may have used the guard/assume to
identify the
value of the condition, and RUAWing will fold the guard/assume and uses
before the guards/assumes.
Reviewers: sanjoy, reames, trentxintong, mkazantsev
Reviewed by: sanjoy, reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33257
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303633 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We have a bug when RAUWing the condition if experimental.guard or assumes is a use of that
condition. This is because LazyValueInfo may have used the guards/assumes to identify the
value of the condition at the end of the block. RAUW replaces the uses
at the guard/assume as well as uses before the guard/assume. Both of
these are incorrect.
For now, disable RAUW for conditions and fix the logic as a next
step: https://reviews.llvm.org/D33257
Reviewers: sanjoy, reames, trentxintong
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D33279
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303349 91177308-0d34-0410-b5e6-96231b3b80d8
We may not be able to rewrite indirect branch target, but we also want to take it into
account when folding, i.e. if it and all its successor's predecessors go to the same
destination, we can fold, i.e. no need to thread.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301816 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In case all predecessor go to a single successor of current BB. We want to fold (not thread).
I failed to update the phi nodes properly in the last patch https://reviews.llvm.org/rL300657.
Phi nodes values are per predecessor in LLVM.
Reviewers: sanjoy
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32400
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301139 91177308-0d34-0410-b5e6-96231b3b80d8
