Several LLVM tools write text files/streams without using OF_Text.
This can cause problems on platforms which distinguish between
text and binary output. This PR adds the OF_Text flag for the
following tools:
- llvm-dis
- llvm-dwarfdump
- llvm-mca
- llvm-mc (assembler files only)
- opt (assembler files only)
- RemarkStreamer (used e.g. by opt)
Reviewers: rnk, vivekvpandya, Bigcheese, andreadb
Differential Revision: https://reviews.llvm.org/D67696
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@374024 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@369013 91177308-0d34-0410-b5e6-96231b3b80d8
This allows later passes (in particular InstCombine) to optimize more
cases.
One that's important to us is `memcmp(p, q, constant) < 0` and memcmp(p, q, constant) > 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@364412 91177308-0d34-0410-b5e6-96231b3b80d8
Use -fsave-optimization-record=<format> to specify a different format
than the default, which is YAML.
For now, only YAML is supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363573 91177308-0d34-0410-b5e6-96231b3b80d8
* Add a common function to setup opt-remarks
* Rename common options to the same names
* Add error types to distinguish between file errors and regex errors
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363415 91177308-0d34-0410-b5e6-96231b3b80d8
* Add a common function to setup opt-remarks
* Rename common options to the same names
* Add error types to distinguish between file errors and regex errors
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363328 91177308-0d34-0410-b5e6-96231b3b80d8
This was using its own, outdated list of possible captures. This was
at minimum not catching cmpxchg and addrspacecast captures.
One change is now any volatile access is treated as capturing. The
test coverage for this pass is quite inadequate, but this required
removing volatile in the lifetime capture test.
Also fixes some infrastructure issues to allow running just the IR
pass.
Fixes bug 42238.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363169 91177308-0d34-0410-b5e6-96231b3b80d8
Patch which introduces a target-independent framework for generating
hardware loops at the IR level. Most of the code has been taken from
PowerPC CTRLoops and PowerPC has been ported over to use this generic
pass. The target dependent parts have been moved into
TargetTransformInfo, via isHardwareLoopProfitable, with
HardwareLoopInfo introduced to transfer information from the backend.
Three generic intrinsics have been introduced:
- void @llvm.set_loop_iterations
Takes as a single operand, the number of iterations to be executed.
- i1 @llvm.loop_decrement(anyint)
Takes the maximum number of elements processed in an iteration of
the loop body and subtracts this from the total count. Returns
false when the loop should exit.
- anyint @llvm.loop_decrement_reg(anyint, anyint)
Takes the number of elements remaining to be processed as well as
the maximum numbe of elements processed in an iteration of the loop
body. Returns the updated number of elements remaining.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@362774 91177308-0d34-0410-b5e6-96231b3b80d8
Separate the remark serialization to YAML from the LLVM Diagnostics.
This adds a new serialization abstraction: remarks::Serializer. It's
completely independent from lib/IR and it provides an easy way to
replace YAML by providing a new remarks::Serializer.
Differential Revision: https://reviews.llvm.org/D62632
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@362160 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When refactoring vectorization flags, vectorization was disabled by default in the new pass manager.
This patch re-enables is for both managers, and changes the assumptions opt makes, based on the new defaults.
Comments in opt.cpp should clarify the intended use of all flags to enable/disable vectorization.
Reviewers: chandlerc, jgorbe
Subscribers: jlebar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61091
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@359167 91177308-0d34-0410-b5e6-96231b3b80d8
Removes the code from opt and the pass manager builder.
The code was unused - even by the C library code that was supposed to set
it and had been removed previously.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358024 91177308-0d34-0410-b5e6-96231b3b80d8
Currently we have -Rpass for filtering the remarks that are displayed as
diagnostics, but when using -fsave-optimization-record, there is no way
to filter the remarks while generating them.
This adds support for filtering remarks by passes using a regex.
Ex: `clang -fsave-optimization-record -foptimization-record-passes=inline`
will only emit the remarks coming from the pass `inline`.
This adds:
* `-fsave-optimization-record` to the driver
* `-opt-record-passes` to cc1
* `-lto-pass-remarks-filter` to the LTOCodeGenerator
* `--opt-remarks-passes` to lld
* `-pass-remarks-filter` to llc, opt, llvm-lto, llvm-lto2
* `-opt-remarks-passes` to gold-plugin
Differential Revision: https://reviews.llvm.org/D59268
Original llvm-svn: 355964
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@355984 91177308-0d34-0410-b5e6-96231b3b80d8
Currently we have -Rpass for filtering the remarks that are displayed as
diagnostics, but when using -fsave-optimization-record, there is no way
to filter the remarks while generating them.
This adds support for filtering remarks by passes using a regex.
Ex: `clang -fsave-optimization-record -foptimization-record-passes=inline`
will only emit the remarks coming from the pass `inline`.
This adds:
* `-fsave-optimization-record` to the driver
* `-opt-record-passes` to cc1
* `-lto-pass-remarks-filter` to the LTOCodeGenerator
* `--opt-remarks-passes` to lld
* `-pass-remarks-filter` to llc, opt, llvm-lto, llvm-lto2
* `-opt-remarks-passes` to gold-plugin
Differential Revision: https://reviews.llvm.org/D59268
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@355964 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to store more info about where we're emitting the remarks
without cluttering LLVMContext. This is needed for future support for
the remark section.
Differential Revision: https://reviews.llvm.org/D58996
Original llvm-svn: 355507
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@355514 91177308-0d34-0410-b5e6-96231b3b80d8
Partly addresses PR15026.
There are a few tests that passed in invalid architectures, which are fixed in: rL355349 and D58931
Reviewers: echristo, efriedma, rengolin, atrick
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D58933
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@355455 91177308-0d34-0410-b5e6-96231b3b80d8
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351636 91177308-0d34-0410-b5e6-96231b3b80d8
Currently we have pgo options defined in PassManagerBuilder.cpp only for
instrument pgo, but not for sample pgo. We also have pgo options defined
in NewPMDriver.cpp in opt only for new pass manager and for all kinds of
pgo. They have some inconsistency.
To make the options more consistent and make tests writing easier, the
patch let old pass manager to share the same pgo options with new pass
manager in opt, and removes the options in PassManagerBuilder.cpp.
Differential Revision: https://reviews.llvm.org/D56749
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351392 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Records in the module summary index whether the bitcode was compiled
with the option necessary to enable splitting the LTO unit
(e.g. -fsanitize=cfi, -fwhole-program-vtables, or -fsplit-lto-unit).
The information is passed down to the ModuleSummaryIndex builder via a
new module flag "EnableSplitLTOUnit", which is propagated onto a flag
on the summary index.
This is then used during the LTO link to check whether all linked
summaries were built with the same value of this flag. If not, an error
is issued when we detect a situation requiring whole program visibility
of the class hierarchy. This is the case when both of the following
conditions are met:
1) We are performing LowerTypeTests or Whole Program Devirtualization.
2) There are type tests or type checked loads in the code.
Note I have also changed the ThinLTOBitcodeWriter to also gate the
module splitting on the value of this flag.
Reviewers: pcc
Subscribers: ormris, mehdi_amini, Prazek, inglorion, eraman, steven_wu, dexonsmith, arphaman, dang, llvm-commits
Differential Revision: https://reviews.llvm.org/D53890
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@350948 91177308-0d34-0410-b5e6-96231b3b80d8
This patch defines an interleaved-load-combine pass. The pass searches
for ShuffleVector instructions that represent interleaved loads. Matches are
converted such that they will be captured by the InterleavedAccessPass.
The pass extends LLVMs capabilities to use target specific instruction
selection of interleaved load patterns (e.g.: ld4 on Aarch64
architectures).
Differential Revision: https://reviews.llvm.org/D52653
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@347208 91177308-0d34-0410-b5e6-96231b3b80d8
Add a -debugify-export option to opt. This exports per-pass `debugify`
loss statistics to a file in CSV format.
For some interesting numbers on debug value loss during an -O2 build
of the sqlite3 amalgamation, see the review thread.
Differential Revision: https://reviews.llvm.org/D49003
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337787 91177308-0d34-0410-b5e6-96231b3b80d8
This is a minor cleanup in preparation for a change to export DI
statistics from -check-debugify. To do that, it would be cleaner to have
a dedicated header for the debugify interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337786 91177308-0d34-0410-b5e6-96231b3b80d8
This renames and generalizes -strip-module-flags to erase all named
metadata from a module. This makes it easier to diff IR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333977 91177308-0d34-0410-b5e6-96231b3b80d8
Applying synthetic debug info before the bitcode writer pass has no
testing-related purpose. This commit prevents that from happening.
It also adds tests which check that IR produced with/without
-debugify-each enabled is identical after stripping. This makes it
possible to check that individual passes (or full pipelines) are
invariant to debug info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333861 91177308-0d34-0410-b5e6-96231b3b80d8
The -strip-module-flags option strips llvm.module.flags metadata from a
module at the beginning of the opt pipeline.
This will be used to test whether the output of a pass is debug info
(DI) invariant.
E.g, after applying synthetic debug info to a test case, we'd like to
strip out all DI-related metadata and check that the final IR is
identical to a baseline file without any DI applied, to check that
optimizations aren't inhibited by debug info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333860 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a -debugify-each mode to opt which, when enabled, wraps each
{Module,Function}Pass in a pipeline with logic to add, check, and strip
synthetic debug info for testing purposes.
This mode can be used to test complex pipelines for debug info bugs, or
to collect statistics about the number of debug values & locations lost
throughout various stages of a pipeline.
Patch by Son Tuan Vu!
Differential Revision: https://reviews.llvm.org/D46525
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332312 91177308-0d34-0410-b5e6-96231b3b80d8
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331184 91177308-0d34-0410-b5e6-96231b3b80d8
As demonstrated by the regression tests added in this patch, the
following cases are valid cases:
1. A Function with no DISubprogram attached, but various debug info
related to its instructions, coming, for instance, from an inlined
function, also defined somewhere else in the same module;
2. ... or coming exclusively from the functions inlined and eliminated
from the module entirely.
The ValueMap shared between CloneFunctionInto calls within CloneModule
needs to contain identity mappings for all of the DISubprogram's to
prevent them from being duplicated by MapMetadata / RemapInstruction
calls, this is achieved via DebugInfoFinder collecting all the
DISubprogram's. However, CloneFunctionInto was missing calls into
DebugInfoFinder for functions w/o DISubprogram's attached, but still
referring DISubprogram's from within (case 1). This patch fixes that.
The fix above, however, exposes another issue: if a module contains a
DISubprogram referenced only indirectly from other debug info
metadata, but not attached to any Function defined within the module
(case 2), cloning such a module causes a DICompileUnit duplication: it
will be moved in indirecty via a DISubprogram by DebugInfoFinder first
(because of the first bug fix described above), without being
self-mapped within the shared ValueMap, and then will be copied during
named metadata cloning. So this patch makes sure DebugInfoFinder
visits DICompileUnit's referenced from DISubprogram's as it goes w/o
re-processing llvm.dbg.cu list over and over again for every function
cloned, and makes sure that CloneFunctionInto self-maps
DICompileUnit's referenced from the entire function, not just its own
DISubprogram attached that may also be missing.
The most convenient way of tesing CloneModule I found is to rely on
CloneModule call from `opt -run-twice`, instead of writing tedious
unit tests. That feature has a couple of properties that makes it hard
to use for this purpose though:
1. CloneModule doesn't copy source filename, making `opt -run-twice`
report it as a difference.
2. `opt -run-twice` does the second run on the original module, not
its clone, making the result of cloning completely invisible in opt's
actual output with and without `-run-twice` both, which directly
contradicts `opt -run-twice`s own error message.
This patch fixes this as well.
Reviewed By: aprantl
Reviewers: loladiro, GorNishanov, espindola, echristo, dexonsmith
Subscribers: vsk, debug-info, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D45593
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@330069 91177308-0d34-0410-b5e6-96231b3b80d8
We have a few functions that virtually all command wants to run on
process startup/shutdown. This patch adds InitLLVM class to do that
all at once, so that we don't need to copy-n-paste boilerplate code
to each llvm command's main() function.
Differential Revision: https://reviews.llvm.org/D45602
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@330046 91177308-0d34-0410-b5e6-96231b3b80d8
These aren't the .def style files used in LLVM that require a macro
defined before their inclusion - they're just basic non-modular includes
to stamp out command line flag variables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@329840 91177308-0d34-0410-b5e6-96231b3b80d8
Sometimes users do not specify data layout in LLVM assembly and let llc set the
data layout by target triple after loading the LLVM assembly.
Currently the parser checks alloca address space no matter whether the LLVM
assembly contains data layout definition, which causes false alarm since the
default data layout does not contain the correct alloca address space.
The parser also calls verifier to check debug info and updating invalid debug
info. Currently there is no way to let the verifier to check debug info only.
If the verifier finds non-debug-info issues the parser will fail.
For llc, the fix is to remove the check of alloca addr space in the parser and
disable updating debug info, and defer the updating of debug info and
verification to be after setting data layout of the IR by target.
For other llvm tools, since they do not override data layout by target but
instead can override data layout by a command line option, an argument for
overriding data layout is added to the parser. In cases where data layout
overriding is necessary for the parser, the data layout can be provided by
command line.
Differential Revision: https://reviews.llvm.org/D41832
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@323826 91177308-0d34-0410-b5e6-96231b3b80d8
Combine expression patterns to form expressions with fewer, simple instructions.
This pass does not modify the CFG.
For example, this pass reduce width of expressions post-dominated by TruncInst
into smaller width when applicable.
It differs from instcombine pass in that it contains pattern optimization that
requires higher complexity than the O(1), thus, it should run fewer times than
instcombine pass.
Differential Revision: https://reviews.llvm.org/D38313
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@323321 91177308-0d34-0410-b5e6-96231b3b80d8
