Introduce a DW_OP_LLVM_convert Dwarf expression pseudo op that allows
for a convenient way to perform type conversions on the Dwarf expression
stack. As an additional bonus it paves the way for using other Dwarf
v5 ops that need to reference a base_type.
The new DW_OP_LLVM_convert is used from lib/Transforms/Utils/Local.cpp
to perform sext/zext on debug values but mainly the patch is about
preparing terrain for adding other Dwarf v5 ops that need to reference a
base_type.
For Dwarf v5 the op maps to DW_OP_convert and for earlier versions a
complex shift & mask pattern is generated to emulate sext/zext.
This is a recommit of r356442 with trivial fixes for the failing tests.
Differential Revision: https://reviews.llvm.org/D56587
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356451 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce a DW_OP_LLVM_convert Dwarf expression pseudo op that allows
for a convenient way to perform type conversions on the Dwarf expression
stack. As an additional bonus it paves the way for using other Dwarf
v5 ops that need to reference a base_type.
The new DW_OP_LLVM_convert is used from lib/Transforms/Utils/Local.cpp
to perform sext/zext on debug values but mainly the patch is about
preparing terrain for adding other Dwarf v5 ops that need to reference a
base_type.
For Dwarf v5 the op maps to DW_OP_convert and for earlier versions a
complex shift & mask pattern is generated to emulate sext/zext.
Differential Revision: https://reviews.llvm.org/D56587
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356442 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch separates two semantics of `applyUpdates`:
1. User provides an accurate CFG diff and the dominator tree is updated according to the difference of `the number of edge insertions` and `the number of edge deletions` to infer the status of an edge before and after the update.
2. User provides a sequence of hints. Updates mentioned in this sequence might never happened and even duplicated.
Logic changes:
Previously, removing invalid updates is considered a side-effect of deduplication and is not guaranteed to be reliable. To handle the second semantic, `applyUpdates` does validity checking before deduplication, which can cause updates that have already been applied to be submitted again. Then, different calls to `applyUpdates` might cause unintended consequences, for example,
```
DTU(Lazy) and Edge A->B exists.
1. DTU.applyUpdates({{Delete, A, B}, {Insert, A, B}}) // User expects these 2 updates result in a no-op, but {Insert, A, B} is queued
2. Remove A->B
3. DTU.applyUpdates({{Delete, A, B}}) // DTU cancels this update with {Insert, A, B} mentioned above together (Unintended)
```
But by restricting the precondition that updates of an edge need to be strictly ordered as how CFG changes were made, we can infer the initial status of this edge to resolve this issue.
Interface changes:
The second semantic of `applyUpdates` is separated to `applyUpdatesPermissive`.
These changes enable DTU(Lazy) to use the first semantic if needed, which is quite useful in `transforms/utils`.
Reviewers: kuhar, brzycki, dmgreen, grosser
Reviewed By: brzycki
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58170
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@354669 91177308-0d34-0410-b5e6-96231b3b80d8
Salvaging a redundant load instruction into a debug expression hides a
memory read from optimisation passes. Passes that alter memory behaviour
(such as LICM promoting memory to a register) aren't aware of these debug
memory reads and leave them unaltered, making the debug variable location
point somewhere unsafe.
Teaching passes to know about these debug memory reads would be challenging
and probably incomplete. Finding dbg.value instructions that need to be fixed
would likely be computationally expensive too, as more analysis would be
required. It's better to not generate debug-memory-reads instead, alas.
Changed tests:
* DeadStoreElim: test for salvaging of intermediate operations contributing
to the dead store, instead of salvaging of the redundant load,
* GVN: remove debuginfo behaviour checks completely, this behaviour is still
covered by other tests,
* InstCombine: don't test for salvaged loads, we're removing that behaviour.
Differential Revision: https://reviews.llvm.org/D57962
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353824 91177308-0d34-0410-b5e6-96231b3b80d8
`CallBase`.
Users have been updated. You can see how to update any out-of-tree
usages: pass `cast<CallBase>(CS.getInstruction())`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353661 91177308-0d34-0410-b5e6-96231b3b80d8
`CallBase` class rather than `CallSite` wrappers.
I pushed this change down through most of the statepoint infrastructure,
completely removing the use of CallSite where I could reasonably do so.
I ended up making a couple of cut-points: generic call handling
(instcombine, TLI, SDAG). As soon as it hit truly generic handling with
users outside the immediate code, I simply transitioned into or out of
a `CallSite` to make this a reasonable sized chunk.
Differential Revision: https://reviews.llvm.org/D56122
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353660 91177308-0d34-0410-b5e6-96231b3b80d8
This patch accompanies the RFC posted here:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/127239.html
This patch adds a new CallBr IR instruction to support asm-goto
inline assembly like gcc as used by the linux kernel. This
instruction is both a call instruction and a terminator
instruction with multiple successors. Only inline assembly
usage is supported today.
This also adds a new INLINEASM_BR opcode to SelectionDAG and
MachineIR to represent an INLINEASM block that is also
considered a terminator instruction.
There will likely be more bug fixes and optimizations to follow
this, but we felt it had reached a point where we would like to
switch to an incremental development model.
Patch by Craig Topper, Alexander Ivchenko, Mikhail Dvoretckii
Differential Revision: https://reviews.llvm.org/D53765
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353563 91177308-0d34-0410-b5e6-96231b3b80d8
Check that when SimplifyCFG is flattening a 'br', all their debug intrinsic instructions are removed, including any dbg.label referencing a label associated with the basic blocks being removed.
Differential Revision: https://reviews.llvm.org/D57444
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353511 91177308-0d34-0410-b5e6-96231b3b80d8
DomTreeUpdater depends on headers from Analysis, but is in IR. This is a
layering violation since Analysis depends on IR. Relocate this code from IR
to Analysis to fix the layering violation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353265 91177308-0d34-0410-b5e6-96231b3b80d8
Some use cases are appearing where salvaging is needed that does not
correspond to an instruction being deleted -- for example an instruction
being sunk, or a Value not being available in a block being isel'd.
Enable more fine grained control over how salavging occurs by splitting
the logic into helper functions, separating things that are specific to
working on DbgVariableIntrinsics from those specific to interpreting IR
and building DIExpressions.
Differential Revision: https://reviews.llvm.org/D57696
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353156 91177308-0d34-0410-b5e6-96231b3b80d8
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351636 91177308-0d34-0410-b5e6-96231b3b80d8
The current llvm.mem.parallel_loop_access metadata has a problem in that
it uses LoopIDs. LoopID unfortunately is not loop identifier. It is
neither unique (there's even a regression test assigning the some LoopID
to multiple loops; can otherwise happen if passes such as LoopVersioning
make copies of entire loops) nor persistent (every time a property is
removed/added from a LoopID's MDNode, it will also receive a new LoopID;
this happens e.g. when calling Loop::setLoopAlreadyUnrolled()).
Since most loop transformation passes change the loop attributes (even
if it just to mark that a loop should not be processed again as
llvm.loop.isvectorized does, for the versioned and unversioned loop),
the parallel access information is lost for any subsequent pass.
This patch unlinks LoopIDs and parallel accesses.
llvm.mem.parallel_loop_access metadata on instruction is replaced by
llvm.access.group metadata. llvm.access.group points to a distinct
MDNode with no operands (avoiding the problem to ever need to add/remove
operands), called "access group". Alternatively, it can point to a list
of access groups. The LoopID then has an attribute
llvm.loop.parallel_accesses with all the access groups that are parallel
(no dependencies carries by this loop).
This intentionally avoid any kind of "ID". Loops that are clones/have
their attributes modifies retain the llvm.loop.parallel_accesses
attribute. Access instructions that a cloned point to the same access
group. It is not necessary for each access to have it's own "ID" MDNode,
but those memory access instructions with the same behavior can be
grouped together.
The behavior of llvm.mem.parallel_loop_access is not changed by this
patch, but should be considered deprecated.
Differential Revision: https://reviews.llvm.org/D52116
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@349725 91177308-0d34-0410-b5e6-96231b3b80d8
When converting dbg.declares, if the described value is a [s|z]ext,
refer to the ext directly instead of referring to its operand.
This fixes a narrowing bug (the debugger got the sign of a variable
wrong, see llvm.org/PR35400).
The main reason to refer to the ext's operand was that an optimization
may remove the ext itself, leading to a dropped variable. Now that
InstCombine has been taught to use replaceAllDbgUsesWith (r336451), this
is less of a concern. Other passes can/should adopt this API as needed
to fix dropped variable bugs.
Differential Revision: https://reviews.llvm.org/D51813
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@349214 91177308-0d34-0410-b5e6-96231b3b80d8
Add methods to BasicBlock which make it easier to efficiently check
whether a block has N (or more) predecessors.
This can be more efficient than using pred_size(), which is a linear
time operation.
We might consider adding similar methods for successors. I haven't done
so in this patch because succ_size() is already O(1).
With this patch applied, I measured a 0.065% compile-time reduction in
user time for running `opt -O3` on the sqlite3 amalgamation (30 trials).
The change in mergeStoreIntoSuccessor alone saves 45 million linked list
iterations in a stage2 Release build of llc.
See llvm.org/PR39702 for a harder but more general way of achieving
similar results.
Differential Revision: https://reviews.llvm.org/D54686
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@347256 91177308-0d34-0410-b5e6-96231b3b80d8
As K has to dominate I, IIUC I's range metadata must be a subset of
K's. After Eli's recent clarification to the LangRef, loading a value
outside of the range is undefined behavior.
Therefore if I's range contains elements outside of K's range and we would load
one such value, K would cause undefined behavior.
In cases like hoisting/sinking, we still want the most generic range
over all code paths to/from the hoist/sink point. As suggested in the
patches related to D47339, I will refactor the handling of those
scenarios and try to decouple it from this function as follow up, once
we switched to a similar handling of metadata in most of
combineMetadata.
I updated some tests checking mostly the merging of metadata to keep the
metadata of to dominating load. The most interesting one is probably test8 in
test/Transforms/JumpThreading/thread-loads.ll. It contained a comment
about the alias metadata preventing us to eliminate the branch, but it
seem like the actual problem currently is that we merge the ranges of
both loads and cannot eliminate the icmp afterwards. With this patch, we
manage to eliminate the icmp, as the range of the first load excludes 8.
Reviewers: efriedma, nlopes, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D51629
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@345456 91177308-0d34-0410-b5e6-96231b3b80d8
by `getTerminator()` calls instead be declared as `Instruction`.
This is the biggest remaining chunk of the usage of `getTerminator()`
that insists on the narrow type and so is an easy batch of updates.
Several files saw more extensive updates where this would cascade to
requiring API updates within the file to use `Instruction` instead of
`TerminatorInst`. All of these were trivial in nature (pervasively using
`Instruction` instead just worked).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344502 91177308-0d34-0410-b5e6-96231b3b80d8
This is a bit awkward in a handful of places where we didn't even have
an instruction and now we have to see if we can build one. But on the
whole, this seems like a win and at worst a reasonable cost for removing
`TerminatorInst`.
All of this is part of the removal of `TerminatorInst` from the
`Instruction` type hierarchy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@340701 91177308-0d34-0410-b5e6-96231b3b80d8
The core get and set routines move to the `Instruction` class. These
routines are only valid to call on instructions which are terminators.
The iterator and *generic* range based access move to `CFG.h` where all
the other generic successor and predecessor access lives. While moving
the iterator here, simplify it using the iterator utilities LLVM
provides and updates coding style as much as reasonable. The APIs remain
pointer-heavy when they could better use references, and retain the odd
behavior of `operator*` and `operator->` that is common in LLVM
iterators. Adjusting this API, if desired, should be a follow-up step.
Non-generic range iteration is added for the two instructions where
there is an especially easy mechanism and where there was code
attempting to use the range accessor from a specific subclass:
`indirectbr` and `br`. In both cases, the successors are contiguous
operands and can be easily iterated via the operand list.
This is the first major patch in removing the `TerminatorInst` type from
the IR's instruction type hierarchy. This change was discussed in an RFC
here and was pretty clearly positive:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123407.html
There will be a series of much more mechanical changes following this
one to complete this move.
Differential Revision: https://reviews.llvm.org/D47467
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@340698 91177308-0d34-0410-b5e6-96231b3b80d8
This patch makes the DoesKMove argument non-optional, to force people
to think about it. Most cases where it is false are either code hoisting
or code sinking, where we pick one instruction from a set of
equal instructions among different code paths.
Reviewers: dberlin, nlopes, efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D47475
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@340606 91177308-0d34-0410-b5e6-96231b3b80d8
In combineMetadata, we should be able to preserve K's nonnull metadata,
if K does not move. This condition should hold for all replacements by
NewGVN/GVN, but I added a bunch of assertions to verify that.
Fixes PR35038.
There probably are additional kinds of metadata that could be preserved
using similar reasoning. This is follow-up work.
Reviewers: dberlin, davide, efriedma, nlopes
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D47339
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@339149 91177308-0d34-0410-b5e6-96231b3b80d8
This function is shared between both implementations. I am not sure if
Utils/Local.h is the best place though.
Reviewers: davide, dberlin, efriedma, xbolva00
Reviewed By: efriedma, xbolva00
Differential Revision: https://reviews.llvm.org/D47337
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@339138 91177308-0d34-0410-b5e6-96231b3b80d8
In the past, DbgInfoIntrinsic has a strong assumption that these
intrinsics all have variables and expressions attached to them.
However, it is too strong to derive the class for other debug entities.
Now, it has problems for debug labels.
In order to make DbgInfoIntrinsic as a base class for 'debug info', I
create a class for 'variable debug info', DbgVariableIntrinsic.
DbgDeclareInst, DbgAddrIntrinsic, and DbgValueInst will be derived from it.
Differential Revision: https://reviews.llvm.org/D50220
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338984 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Previously, `removeUnreachableBlocks` still returns true (which indicates the CFG is changed) even when all the unreachable blocks found is awaiting deletion in the DDT class.
This makes code pattern like
```
// Code modified from lib/Transforms/Scalar/SimplifyCFGPass.cpp
bool EverChanged = removeUnreachableBlocks(F, nullptr, DDT);
...
do {
EverChanged = someMightHappenModifications();
EverChanged |= removeUnreachableBlocks(F, nullptr, DDT);
} while (EverChanged);
```
become a dead loop.
Fix this by detecting whether a BasicBlock is already awaiting deletion.
Reviewers: kuhar, brzycki, dmgreen, grosser, davide
Reviewed By: kuhar, brzycki
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49738
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338882 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch is the second in a series of patches related to the [[ http://lists.llvm.org/pipermail/llvm-dev/2018-June/123883.html | RFC - A new dominator tree updater for LLVM ]].
It converts passes (e.g. adce/jump-threading) and various functions which currently accept DDT in local.cpp and BasicBlockUtils.cpp to use the new DomTreeUpdater class.
These converted functions in utils can accept DomTreeUpdater with either UpdateStrategy and can deal with both DT and PDT held by the DomTreeUpdater.
Reviewers: brzycki, kuhar, dmgreen, grosser, davide
Reviewed By: brzycki
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48967
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338814 91177308-0d34-0410-b5e6-96231b3b80d8
LowerDbgDeclare inserts a dbg.value before each use of an address
described by a dbg.declare. When inserting a dbg.value before a CallInst
use, however, it fails to append DW_OP_deref to the DIExpression.
The DW_OP_deref is needed to reflect the fact that a dbg.value describes
a source variable directly (as opposed to a dbg.declare, which relies on
pointer indirection).
This patch adds in the DW_OP_deref where needed. This results in the
correct values being shown during a debug session for a program compiled
with ASan and optimizations (see https://reviews.llvm.org/D49520). Note
that ConvertDebugDeclareToDebugValue is already correct -- no changes
there were needed.
One complication is that SelectionDAG is unable to distinguish between
direct and indirect frame-index (FRAMEIX) SDDbgValues. This patch also
fixes this long-standing issue in order to not regress integration tests
relying on the incorrect assumption that all frame-index SDDbgValues are
indirect. This is a necessary fix: the newly-added DW_OP_derefs cannot
be lowered properly otherwise. Basically the fix prevents a direct
SDDbgValue with DIExpression(DW_OP_deref) from being dereferenced twice
by a debugger. There were a handful of tests relying on this incorrect
"FRAMEIX => indirect" assumption which actually had incorrect
DW_AT_locations: these are all fixed up in this patch.
Testing:
- check-llvm, and an end-to-end test using lldb to debug an optimized
program.
- Existing unit tests for DIExpression::appendToStack fully cover the
new DIExpression::append utility.
- check-debuginfo (the debug info integration tests)
Differential Revision: https://reviews.llvm.org/D49454
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338069 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The optimizer is 10%+ slower with vs without debuginfo. I started checking where
the difference is coming from.
I compiled sqlite3.c with and without debug info from CTMark and compare the time difference.
I use Xcode Instrument to find where time is spent. This brings about 20ms, out of ~20s.
Reviewers: davide, hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D49337
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337416 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Support for this option is needed for building Linux kernel.
This is a very frequently requested feature by kernel developers.
More details : https://lkml.org/lkml/2018/4/4/601
GCC option description for -fdelete-null-pointer-checks:
This Assume that programs cannot safely dereference null pointers,
and that no code or data element resides at address zero.
-fno-delete-null-pointer-checks is the inverse of this implying that
null pointer dereferencing is not undefined.
This feature is implemented in LLVM IR in this CL as the function attribute
"null-pointer-is-valid"="true" in IR (Under review at D47894).
The CL updates several passes that assumed null pointer dereferencing is
undefined to not optimize when the "null-pointer-is-valid"="true"
attribute is present.
Reviewers: t.p.northover, efriedma, jyknight, chandlerc, rnk, srhines, void, george.burgess.iv
Reviewed By: efriedma, george.burgess.iv
Subscribers: eraman, haicheng, george.burgess.iv, drinkcat, theraven, reames, sanjoy, xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D47895
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336613 91177308-0d34-0410-b5e6-96231b3b80d8
The replaceAllDbgUsesWith utility helps passes preserve debug info when
replacing one value with another.
This improves upon the existing insertReplacementDbgValues API by:
- Updating debug intrinsics in-place, while preventing use-before-def of
the replacement value.
- Falling back to salvageDebugInfo when a replacement can't be made.
- Moving the responsibiliy for rewriting llvm.dbg.* DIExpressions into
common utility code.
Along with the API change, this teaches replaceAllDbgUsesWith how to
create DIExpressions for three basic integer and pointer conversions:
- The no-op conversion. Applies when the values have the same width, or
have bit-for-bit compatible pointer representations.
- Truncation. Applies when the new value is wider than the old one.
- Zero/sign extension. Applies when the new value is narrower than the
old one.
Testing:
- check-llvm, check-clang, a stage2 `-g -O3` build of clang,
regression/unit testing.
- This resolves a number of mis-sized dbg.value diagnostics from
Debugify.
Differential Revision: https://reviews.llvm.org/D48676
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336451 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When salvaging a dbg.declare/dbg.addr we should not add
DW_OP_stack_value to the DIExpression
(see test/Transforms/InstCombine/salvage-dbg-declare.ll).
Consider this example
%vla = alloca i32, i64 2
call void @llvm.dbg.declare(metadata i32* %vla, metadata !1, metadata !DIExpression())
Instcombine will turn it into
%vla1 = alloca [2 x i32]
%vla1.sub = getelementptr inbounds [2 x i32], [2 x i32]* %vla, i64 0, i64 0
call void @llvm.dbg.declare(metadata [2 x i32]* %vla1.sub, metadata !19, metadata !DIExpression())
If the GEP can be eliminated, then the dbg.declare will be salvaged
and we should get
%vla1 = alloca [2 x i32]
call void @llvm.dbg.declare(metadata [2 x i32]* %vla1, metadata !19, metadata !DIExpression())
The problem was that salvageDebugInfo did not recognize dbg.declare
as being indirect (%vla1 points to the value, it does not hold the
value), so we incorrectly got
call void @llvm.dbg.declare(metadata [2 x i32]* %vla1, metadata !19, metadata !DIExpression(DW_OP_stack_value))
I also made sure that llvm::salvageDebugInfo and
DIExpression::prependOpcodes do not add DW_OP_stack_value to
the DIExpression in case no new operands are added to the
DIExpression. That way we avoid to, unneccessarily, turn a
register location expression into an implicit location expression
in some situations (see test11 in test/Transforms/LICM/sinking.ll).
Reviewers: aprantl, vsk
Reviewed By: aprantl, vsk
Subscribers: JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D48837
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336191 91177308-0d34-0410-b5e6-96231b3b80d8
Add an overload for the common case where the replacement dbg.values
have the same DIExpressions as the originals.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335643 91177308-0d34-0410-b5e6-96231b3b80d8
salvageDebugInfo() performs a check that allows it to exit early without
doing a DenseMap lookup. It's a bit neater and marginally more useful to
sink this early exit into the findDbg{Addr,Users,Values} helpers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335642 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is a follow-up to r334830 and r335031.
In the valueCoversEntireFragment check we now also handle
the situation when there is a variable length array (VLA)
involved, and the length of the array has been reduced to
a constant.
The ConvertDebugDeclareToDebugValue functions that are related
to PHI nodes and load instructions now avoid inserting dbg.value
intrinsics when the value does not, for certain, cover the
variable/fragment that should be described.
In r334830 we assumed that the value always covered the entire
var/fragment and we had assertions in the code to show that
assumption. However, those asserts failed when compiling code
with VLAs, so we removed the asserts in r335031. Now when we
know that the valueCoversEntireFragment check can fail also for
PHI/Load instructions we avoid to insert the faulty dbg.value
intrinsic in such situations. Compared to the Store instruction
scenario we simply drop the dbg.value here (as the variable does
not change its value due to PHI/Load, so an earlier dbg.value
describing the variable should still be valid).
Reviewers: aprantl, vsk, efriedma
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48547
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335580 91177308-0d34-0410-b5e6-96231b3b80d8
This utility should operate on Values, not Instructions. While I'm here,
I've also made it possible to skip emitting replacement dbg.values for
certain debug users (by having RewriteExpr return nullptr).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335152 91177308-0d34-0410-b5e6-96231b3b80d8
