Summary:
This patch introduce new intrinsic -
strip.invariant.group that was described in the
RFC: Devirtualization v2
Reviewers: rsmith, hfinkel, nlopes, sanjoy, amharc, kuhar
Subscribers: arsenm, nhaehnle, JDevlieghere, hiraditya, xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D47103
Co-authored-by: Krzysztof Pszeniczny <krzysztof.pszeniczny@gmail.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336073 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Two utils methods have essentially the same functionality. This is an attempt to merge them into one.
1. lib/Transforms/Utils/Local.cpp : MergeBasicBlockIntoOnlyPred
2. lib/Transforms/Utils/BasicBlockUtils.cpp : MergeBlockIntoPredecessor
Prior to the patch:
1. MergeBasicBlockIntoOnlyPred
Updates either DomTree or DeferredDominance
Moves all instructions from Pred to BB, deletes Pred
Asserts BB has single predecessor
If address was taken, replace the block address with constant 1 (?)
2. MergeBlockIntoPredecessor
Updates DomTree, LoopInfo and MemoryDependenceResults
Moves all instruction from BB to Pred, deletes BB
Returns if doesn't have a single predecessor
Returns if BB's address was taken
After the patch:
Method 2. MergeBlockIntoPredecessor is attempting to become the new default:
Updates DomTree or DeferredDominance, and LoopInfo and MemoryDependenceResults
Moves all instruction from BB to Pred, deletes BB
Returns if doesn't have a single predecessor
Returns if BB's address was taken
Uses of MergeBasicBlockIntoOnlyPred that need to be replaced:
1. lib/Transforms/Scalar/LoopSimplifyCFG.cpp
Updated in this patch. No challenges.
2. lib/CodeGen/CodeGenPrepare.cpp
Updated in this patch.
i. eliminateFallThrough is straightforward, but I added using a temporary array to avoid the iterator invalidation.
ii. eliminateMostlyEmptyBlock(s) methods also now use a temporary array for blocks
Some interesting aspects:
- Since Pred is not deleted (BB is), the entry block does not need updating.
- The entry block was being updated with the deleted block in eliminateMostlyEmptyBlock. Added assert to make obvious that BB=SinglePred.
- isMergingEmptyBlockProfitable assumes BB is the one to be deleted.
- eliminateMostlyEmptyBlock(BB) does not delete BB on one path, it deletes its unique predecessor instead.
- adding some test owner as subscribers for the interesting tests modified:
test/CodeGen/X86/avx-cmp.ll
test/CodeGen/AMDGPU/nested-loop-conditions.ll
test/CodeGen/AMDGPU/si-annotate-cf.ll
test/CodeGen/X86/hoist-spill.ll
test/CodeGen/X86/2006-11-17-IllegalMove.ll
3. lib/Transforms/Scalar/JumpThreading.cpp
Not covered in this patch. It is the only use case using the DeferredDominance.
I would defer to Brian Rzycki to make this replacement.
Reviewers: chandlerc, spatel, davide, brzycki, bkramer, javed.absar
Subscribers: qcolombet, sanjoy, nemanjai, nhaehnle, jlebar, tpr, kbarton, RKSimon, wmi, arsenm, llvm-commits
Differential Revision: https://reviews.llvm.org/D48202
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335183 91177308-0d34-0410-b5e6-96231b3b80d8
CodeGenPrepare pass move extension instructions close to load instructions in different BB, so they can be combined later. But the extension instructions can't move through logical and shift instructions in current implementation. This patch enables this enhancement, so we can eliminate more extension instructions.
Differential Revision: https://reviews.llvm.org/D45537
This is re-commit of r331783, which was reverted by r333305. The performance regression was caused by some unlucky alignment, not a code generation problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@334049 91177308-0d34-0410-b5e6-96231b3b80d8
The patch r331783 caused regression in one of our internal application. So revert it now, will investigate it further.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333305 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This feature is not needed, but it might be usefull in the future
to use metadata to mark what which function should support it
(and strip it when not).
Reviewers: rsmith, sanjoy, amharc, kuhar
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D45419
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332787 91177308-0d34-0410-b5e6-96231b3b80d8
Accessing the members of a large data structures needs a lot of GEPs which
usually have large offsets due to the size of the underlying data structure. If
the offsets are too large to fit into the r+i addressing mode, these GEPs cannot
be sunk to their users' blocks and many extra registers are needed then to carry
the values of these GEPs.
This patch tries to split a large data struct starting from %base like the
following.
Before:
BB0:
%base =
BB1:
%gep0 = gep %base, off0
%gep1 = gep %base, off1
%gep2 = gep %base, off2
BB2:
%load1 = load %gep0
%load2 = load %gep1
%load3 = load %gep2
After:
BB0:
%base =
%new_base = gep %base, off0
BB1:
%new_gep0 = %new_base
%new_gep1 = gep %new_base, off1 - off0
%new_gep2 = gep %new_base, off2 - off0
BB2:
%load1 = load i32, i32* %new_gep0
%load2 = load i32, i32* %new_gep1
%load3 = load i32, i32* %new_gep2
In the above example, the struct is split into two parts. The first part still
starts from %base and the second part starts from %new_base. After the
splitting, %new_gep1 and %new_gep2 have smaller offsets and then can be sunk to
BB2 and folded into their users.
The algorithm to split data structure is simple and very similar to the work of
merging SExts. First, it collects GEPs that have large offsets when iterating
the blocks. Second, it splits the underlying data structures and updates the
collected GEPs to use smaller offsets.
Differential Revision: https://reviews.llvm.org/D42759
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332015 91177308-0d34-0410-b5e6-96231b3b80d8
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331841 91177308-0d34-0410-b5e6-96231b3b80d8
CodeGenPrepare pass move extension instructions close to load instructions in different BB, so they can be combined later. But the extension instructions can't move through logical and shift instructions in current implementation. This patch enables this enhancement, so we can eliminate more extension instructions.
Differential Revision: https://reviews.llvm.org/D45537
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331783 91177308-0d34-0410-b5e6-96231b3b80d8
When we replace the Phi we created with matched ones it is possible that
there are two identical phi nodes in IR. And matcher is smart enough to find that
new created phi matches both of them. So we try to replace our phi node with
matched ones twice and what is bad we delete our phi node twice causing a crash.
As soon as we found that we have two identical Phi nodes it makes sense to do
a clean-up and replace one phi node by other one.
The patch implements it.
Reviewers: john.brawn, reames
Reviewed By: john.brawn
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43758
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@327250 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
CodeGenPrepare pass to be more aggressive in improving the source and destination alignments
of memcpy/memmove/memset by exploiting our new ability to record independent alignments
for each argument.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@323891 91177308-0d34-0410-b5e6-96231b3b80d8
If in complex addressing mode the difference is in GV then
base reg should not be installed because we plan to use
base reg as a merge point of different GVs.
This is a fix for PR35980.
Reviewers: reames, john.brawn, santosh
Reviewed By: john.brawn
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42230
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@323192 91177308-0d34-0410-b5e6-96231b3b80d8
If the offset is differ in two addressing mode we can continue only if
ScaleReg is not set due to we will use it as merge of different offsets.
It should fix PR35799 and PR35805.
Reviewers: john.brawn, reames
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41227
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@322056 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The function section prefix for PGO based layout (e.g. hot/unlikely)
should look at the hotness of all blocks not just the entry BB.
A function with a cold entry but a very hot loop should be placed in the
hot section, for example, so that it is located close to other hot
functions it may call. For SamplePGO it was already looking at the
branch weights on calls, and I made that code conditional on whether
this is SamplePGO since it was essentially a noop for instrumentation
PGO anyway.
Reviewers: davidxl
Subscribers: eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D41395
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@321197 91177308-0d34-0410-b5e6-96231b3b80d8
When we put the value in select placeholder we must pass
the value through simplification tracker due to the value might
be already simplified and erased.
This is a fix for PR35658.
Reviewers: john.brawn, uabelho
Reviewed By: john.brawn
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D41251
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320956 91177308-0d34-0410-b5e6-96231b3b80d8
(This reapplies r314253. r314253 was reverted on r314482 because of a
correctness regression on P100, but that regression was identified to be
something else.)
Summary:
Don't bail out on constant divisors for divisions that can be narrowed without
introducing control flow . This gives us a 32 bit multiply instead of an
emulated 64 bit multiply in the generated PTX assembly.
Reviewers: jlebar
Subscribers: jholewinski, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D38265
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319677 91177308-0d34-0410-b5e6-96231b3b80d8
If common type is different we should bail out due to we will not be
able to create a select or Phi of these values.
Basically it is done in ExtAddrMode::compare however it does not work
if we handle the null first and then two values of different types.
so add a check in initializeMap as well. The check in ExtAddrMode::compare
is used as earlier bail out.
Reviewers: reames, john.brawn
Reviewed By: john.brawn
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40479
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319292 91177308-0d34-0410-b5e6-96231b3b80d8
The current way that trivial addressing modes are detected incorrectly thinks
that null pointers are non-trivial, leading to an infinite loop where we keep
duplicating the same select. Fix this by aware of null when deciding if an
addressing mode is trivial.
Differential Revision: https://reviews.llvm.org/D40447
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319019 91177308-0d34-0410-b5e6-96231b3b80d8
CodeGenPrepare sinks address computations from one basic block to another
and attempts to reuse address computations that have already been sunk. If
the same address computation appears twice with the first instance as an
operand of a load whose result is an operand to a simplifable select,
CodeGenPrepare simplifies the select and recursively erases the now dead
instructions. CodeGenPrepare then attempts to use the erased address
computation for the second load.
Fix this by erasing the cached address value if it has zero uses before
looking for the address value in the sunken address map.
This partially resolves PR35209.
Thanks to Alexander Richardson for reporting the issue!
This fixed version relands r318032 which was reverted in r318049 due to
sanitizer buildbot failures.
Reviewers: john.brawn
Differential Revision: https://reviews.llvm.org/D39841
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318956 91177308-0d34-0410-b5e6-96231b3b80d8
This patch extends the recent work in optimizeMemoryInst to make it able to
combine more ExtAddrMode fields than just the BaseReg.
This fixes some benchmark regressions introduced by r309397, where GVN PRE is
hoisting a getelementptr such that it can no longer be combined into the
addressing mode of the load or store that uses it.
Differential Revision: https://reviews.llvm.org/D38133
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318949 91177308-0d34-0410-b5e6-96231b3b80d8
We must collect all AddModes even if they are the same.
This is due to Original value is different but we need all original
values collected as they are used as anchors in common phi finding.
Reviewers: john.brawn, reames
Reviewed By: john.brawn
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40166
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318638 91177308-0d34-0410-b5e6-96231b3b80d8
llvm.invariant.group.barrier may accept pointers to arbitrary address space.
This patch let it accept pointers to i8 in any address space and returns
pointer to i8 in the same address space.
Differential Revision: https://reviews.llvm.org/D39973
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318413 91177308-0d34-0410-b5e6-96231b3b80d8
CodeGenPrepare sinks address computations from one basic block to another
and attempts to reuse address computations that have already been sunk. If
the same address computation appears twice with the first instance as an
operand of a load whose result is an operand to a simplifable select,
CodeGenPrepare simplifies the select and recursively erases the now dead
instructions. CodeGenPrepare then attempts to use the erased address
computation for the second load.
Fix this by erasing the cached address value if it has zero uses before
looking for the address value in the sunken address map.
This partially resolves PR35209.
Thanks to Alexander Richardson for reporting the issue!
Reviewers: john.brawn
Differential Revision: https://reviews.llvm.org/D39841
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318032 91177308-0d34-0410-b5e6-96231b3b80d8
This patch disables the handling of selects in optimization
extensing scope of optimizeMemoryInst.
The optimization itself is disable by default.
The idea here is just to switch optimiztion level step by step.
Specifically, first optimization will be enabled only for Phi nodes,
then select instructions will be added.
In case someone will complain about perfromance it will be easier to
detect what part of optimizations is responsible for that.
Differential Revision: https://reviews.llvm.org/D36073
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317555 91177308-0d34-0410-b5e6-96231b3b80d8
undefined reference to `llvm::TargetPassConfig::ID' on
clang-ppc64le-linux-multistage
This reverts commit eea333c33fa73ad225ef28607795984829f65688.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317213 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is mostly a noop (most of the test diffs are renamed blocks).
There are a few temporary register renames (eax<->ecx) and a few blocks are
shuffled around.
See the discussion in PR33325 for more details.
Reviewers: spatel
Subscribers: mgorny
Differential Revision: https://reviews.llvm.org/D39456
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317211 91177308-0d34-0410-b5e6-96231b3b80d8
Issue found by llvm-isel-fuzzer on OSS fuzz, https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=3725
If anyone actually cares about > 64 bit arithmetic, there's a lot more to do in this area. There's a bunch of obviously wrong code in the same function. I don't have the time to fix all of them and am just using this to understand what the workflow for fixing fuzzer cases might look like.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316967 91177308-0d34-0410-b5e6-96231b3b80d8
- Targets that want to support memcmp expansions now return the list of
supported load sizes.
- Expansion codegen does not assume that all power-of-two load sizes
smaller than the max load size are valid. For examples, this is not the
case for x86(32bit)+sse2.
Fixes PR34887.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316905 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Currently we skip merging when extra moves may be added in the header of switch instead of the case block, if the case block is used as an incoming
block of a PHI. If all the incoming values of the PHIs are non-constants and the destination block is dominated by the switch block then extra moves are likely not added by ISel, so there is no need to skip merging in this case.
Reviewers: efriedma, junbuml, davidxl, hfinkel, qcolombet
Reviewed By: efriedma
Subscribers: dberlin, kuhar, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D37343
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316711 91177308-0d34-0410-b5e6-96231b3b80d8
This lets us optimize away selects that perform the same address computation in
two different ways and is also the first step towards being able to handle
selects between two different, but compatible, address computations.
Differential Revision: https://reviews.llvm.org/D38242
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314794 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r314253. It causes a miscompile on P100 in an internal
benchmark. Reverting while I investigate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314482 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Don't bail out on constant divisors for divisions that can be narrowed without
introducing control flow . This gives us a 32 bit multiply instead of an
emulated 64 bit multiply in the generated PTX assembly.
Reviewers: jlebar
Subscribers: jholewinski, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D38265
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314253 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
GEP merging can sometimes increase the number of live values and register
pressure across control edges and cause performance problems particularly if the
increased register pressure results in spills.
This change implements GEP unmerging around an IndirectBr in certain cases to
mitigate the issue. This is in the CodeGenPrepare pass (after all the GEP
merging has happened.)
With this patch, the Python interpreter loop runs faster by ~5%.
Reviewers: sanjoy, hfinkel
Reviewed By: hfinkel
Subscribers: eastig, junbuml, llvm-commits
Differential Revision: https://reviews.llvm.org/D36772
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312930 91177308-0d34-0410-b5e6-96231b3b80d8
