Summary:
Currently the block frequency analysis is an approximation for irreducible
loops.
The new irreducible loop metadata is used to annotate the irreducible loop
headers with their header weights based on the PGO profile (currently this is
approximated to be evenly weighted) and to help improve the accuracy of the
block frequency analysis for irreducible loops.
This patch is a basic support for this.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: mehdi_amini, llvm-commits, eraman
Differential Revision: https://reviews.llvm.org/D39028
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317278 91177308-0d34-0410-b5e6-96231b3b80d8
These are removed in C++17. We still have some users of
unary_function::argument_type, so just spell that typedef out. No
functionality change intended.
Note that many of the argument types are actually wrong :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313287 91177308-0d34-0410-b5e6-96231b3b80d8
CFI instructions that set appropriate cfa offset and cfa register are now
inserted in emitEpilogue() in X86FrameLowering.
Majority of the changes in this patch:
1. Ensure that CFI instructions do not affect code generation.
2. Enable maintaining correct information about cfa offset and cfa register
in a function when basic blocks are reordered, merged, split, duplicated.
These changes are target independent and described below.
Changed CFI instructions so that they:
1. are duplicable
2. are not counted as instructions when tail duplicating or tail merging
3. can be compared as equal
Add information to each MachineBasicBlock about cfa offset and cfa register
that are valid at its entry and exit (incoming and outgoing CFI info). Add
support for updating this information when basic blocks are merged, split,
duplicated, created. Add a verification pass (CFIInfoVerifier) that checks
that outgoing cfa offset and register of predecessor blocks match incoming
values of their successors.
Incoming and outgoing CFI information is used by a late pass
(CFIInstrInserter) that corrects CFA calculation rule for a basic block if
needed. That means that additional CFI instructions get inserted at basic
block beginning to correct the rule for calculating CFA. Having CFI
instructions in function epilogue can cause incorrect CFA calculation rule
for some basic blocks. This can happen if, due to basic block reordering,
or the existence of multiple epilogue blocks, some of the blocks have wrong
cfa offset and register values set by the epilogue block above them.
Patch by Violeta Vukobrat.
Differential Revision: https://reviews.llvm.org/D18046
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306529 91177308-0d34-0410-b5e6-96231b3b80d8
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304787 91177308-0d34-0410-b5e6-96231b3b80d8
After transforming FP to ST registers:
- Do not add the ST register to the livein lists, they are reserved so
we do not need to track their liveness.
- Remove the FP registers from the livein lists, they don't have defs or
uses anymore and so are not live.
- (The setKillFlags() call is moved to an earlier place as it relies on
the FP registers still being present in the livein list.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304342 91177308-0d34-0410-b5e6-96231b3b80d8
- Adapt MachineBasicBlock::getName() to have the same behavior as the IR
BasicBlock (Value::getName()).
- Add it to lib/CodeGen/CodeGen.cpp::initializeCodeGen so that it is linked in
the CodeGen library.
- MachineRegionInfoPass's name conflicts with RegionInfoPass's name ("region").
- MachineRegionInfo should depend on MachineDominatorTree,
MachinePostDominatorTree and MachineDominanceFrontier instead of their
respective IR versions.
- Since there were no tests for this, add a X86 MIR test.
Patch by Francis Visoiu Mistrih<fvisoiumistrih@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@295518 91177308-0d34-0410-b5e6-96231b3b80d8
With r291169, it is now not possible to access the live-in information
when the liveness is not properly tracked. Although this is want we want
in general, for debugging purpose we may want to still be able to
traverse this information even if it may not be accurate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291317 91177308-0d34-0410-b5e6-96231b3b80d8
Add an assert that checks whether liveins are up to date before they are
used.
- Do not print liveins into .mir files anymore in situations where they
are out of date anyway.
- The assert in the RegisterScavenger is superseded by the new one in
livein_begin().
- Skip parts of the liveness updating logic in IfConversion.cpp when
liveness isn't tracked anymore (just enough to avoid hitting the new
assert()).
Differential Revision: https://reviews.llvm.org/D27562
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291169 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This commits moves skipDebugInstructionsForward and
skipDebugInstructionsBackward from lib/CodeGen/IfConversion.cpp
to include/llvm/CodeGen/MachineBasicBlock.h and updates
some codgen files to use them.
This refactoring was suggested in https://reviews.llvm.org/D27688
and I thought it's best to do the refactoring in a separate
review, but I could also put both changes in a single review
if that's preferred.
Also, the names for the functions aren't the snappiest and
I would be happy to rename them if anybody has suggestions.
Reviewers: eli.friedman, iteratee, aprantl, MatzeB
Subscribers: MatzeB, llvm-commits
Differential Revision: https://reviews.llvm.org/D27782
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289933 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically avoid implicit conversions from/to integral types to
avoid potential errors when changing the underlying type. For example,
a typical initialization of a "full" mask was "LaneMask = ~0u", which
would result in a value of 0x00000000FFFFFFFF if the type was extended
to uint64_t.
Differential Revision: https://reviews.llvm.org/D27454
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289820 91177308-0d34-0410-b5e6-96231b3b80d8
When a phi node is finally lowered to a machine instruction it is
important that the lowered "load" instruction is placed before the
associated DEBUG_VALUE entry describing the value loaded.
Renamed the existing SkipPHIsAndLabels to SkipPHIsLabelsAndDebug to
more fully describe that it also skips debug entries. Then used the
"new" function SkipPHIsAndLabels when the debug information should not
be skipped when placing the lowered "load" instructions so that it is
placed before the debug entries.
Differential Revision: https://reviews.llvm.org/D23760
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281727 91177308-0d34-0410-b5e6-96231b3b80d8
Remove createNode() and any API that depending on it, and add
HasCreateNode to the list of checks for HasObsoleteCustomizations. Now
an ilist *never* allocates (this was already true for iplist).
This factors out all the differences between iplist and ilist. I'll aim
to rename both to "owning_ilist" eventually, to call out the interesting
(not exactly intrusive) ownership semantics. In the meantime, I've left
both names around to reduce code churn.
One of the deleted APIs is the ilist copy constructor. I've lifted up
and tested iplist::cloneFrom (ala simple_ilist::cloneFrom) as a
replacement.
Users of ilist<> and iplist<> that want the list to allocate nodes have
a few options:
- use std::list;
- use AllocatorList or BumpPtrList (or build a similarly trivial list);
- use cloneFrom (which is explicit at the call site); or
- allocate at the call site.
See r280573, r281177, r281181, and r281182 for examples of what to do if
you're updating out-of-tree code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281184 91177308-0d34-0410-b5e6-96231b3b80d8
Now that MachineBasicBlock::reverse_instr_iterator knows when it's at
the end (since r281168 and r281170), implement
MachineBasicBlock::reverse_iterator directly on top of an
ilist::reverse_iterator by adding an IsReverse template parameter to
MachineInstrBundleIterator. This replaces another hard-to-reason-about
use of std::reverse_iterator on list iterators, matching the changes for
ilist::reverse_iterator from r280032 (see the "out of scope" section at
the end of that commit message). MachineBasicBlock::reverse_iterator
now has a handle to the current node and has obvious invalidation
semantics.
r280032 has a more detailed explanation of how list-style reverse
iterators (invalidated when the pointed-at node is deleted) are
different from vector-style reverse iterators like std::reverse_iterator
(invalidated on every operation). A great motivating example is this
commit's changes to lib/CodeGen/DeadMachineInstructionElim.cpp.
Note: If your out-of-tree backend deletes instructions while iterating
on a MachineBasicBlock::reverse_iterator or converts between
MachineBasicBlock::iterator and MachineBasicBlock::reverse_iterator,
you'll need to update your code in similar ways to r280032. The
following table might help:
[Old] ==> [New]
delete &*RI, RE = end() delete &*RI++
RI->erase(), RE = end() RI++->erase()
reverse_iterator(I) std::prev(I).getReverse()
reverse_iterator(I) ++I.getReverse()
--reverse_iterator(I) I.getReverse()
reverse_iterator(std::next(I)) I.getReverse()
RI.base() std::prev(RI).getReverse()
RI.base() ++RI.getReverse()
--RI.base() RI.getReverse()
std::next(RI).base() RI.getReverse()
(For more details, have a look at r280032.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281172 91177308-0d34-0410-b5e6-96231b3b80d8
This is a prep commit before fixing MachineBasicBlock::reverse_iterator
invalidation semantics, ala r281167 for ilist::reverse_iterator. This
changes MachineBasicBlock::Instructions to track which node is the
sentinel regardless of LLVM_ENABLE_ABI_BREAKING_CHECKS.
There's almost no functionality change (aside from ABI). However, in
the rare configuration:
#if !defined(NDEBUG) && !defined(LLVM_ENABLE_ABI_BREAKING_CHECKS)
the isKnownSentinel() assertions in ilist_iterator<>::operator* suddenly
have teeth for MachineInstr. If these assertions start firing for your
out-of-tree backend, have a look at the suggestions in the commit
message for r279314, and at some of the commits leading up to it that
avoid dereferencing the end() iterator.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281168 91177308-0d34-0410-b5e6-96231b3b80d8
Many lists want to override only allocation semantics, or callbacks for
iplist. Split these up to prevent code duplication.
- Specialize ilist_alloc_traits to change the implementations of
deleteNode() and createNode().
- One common desire is to do nothing deleteNode() and disable
createNode(). Specialize ilist_alloc_traits to inherit from
ilist_noalloc_traits for that behaviour.
- Specialize ilist_callback_traits to use the addNodeToList(),
removeNodeFromList(), and transferNodesFromList() callbacks.
As a drive-by, add some coverage to the callback-related unit tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280128 91177308-0d34-0410-b5e6-96231b3b80d8
Reverse iterators to doubly-linked lists can be simpler (and cheaper)
than std::reverse_iterator. Make it so.
In particular, change ilist<T>::reverse_iterator so that it is *never*
invalidated unless the node it references is deleted. This matches the
guarantees of ilist<T>::iterator.
(Note: MachineBasicBlock::iterator is *not* an ilist iterator, but a
MachineInstrBundleIterator<MachineInstr>. This commit does not change
MachineBasicBlock::reverse_iterator, but it does update
MachineBasicBlock::reverse_instr_iterator. See note at end of commit
message for details on bundle iterators.)
Given the list (with the Sentinel showing twice for simplicity):
[Sentinel] <-> A <-> B <-> [Sentinel]
the following is now true:
1. begin() represents A.
2. begin() holds the pointer for A.
3. end() represents [Sentinel].
4. end() holds the poitner for [Sentinel].
5. rbegin() represents B.
6. rbegin() holds the pointer for B.
7. rend() represents [Sentinel].
8. rend() holds the pointer for [Sentinel].
The changes are #6 and #8. Here are some properties from the old
scheme (which used std::reverse_iterator):
- rbegin() held the pointer for [Sentinel] and rend() held the pointer
for A;
- operator*() cost two dereferences instead of one;
- converting from a valid iterator to its valid reverse_iterator
involved a confusing increment; and
- "RI++->erase()" left RI invalid. The unintuitive replacement was
"RI->erase(), RE = end()".
With vector-like data structures these properties are hard to avoid
(since past-the-beginning is not a valid pointer), and don't impose a
real cost (since there's still only one dereference, and all iterators
are invalidated on erase). But with lists, this was a poor design.
Specifically, the following code (which obviously works with normal
iterators) now works with ilist::reverse_iterator as well:
for (auto RI = L.rbegin(), RE = L.rend(); RI != RE;)
fooThatMightRemoveArgFromList(*RI++);
Converting between iterator and reverse_iterator for the same node uses
the getReverse() function.
reverse_iterator iterator::getReverse();
iterator reverse_iterator::getReverse();
Why doesn't iterator <=> reverse_iterator conversion use constructors?
In order to catch and update old code, reverse_iterator does not even
have an explicit conversion from iterator. It wouldn't be safe because
there would be no reasonable way to catch all the bugs from the changed
semantic (see the changes at call sites that are part of this patch).
Old code used this API:
std::reverse_iterator::reverse_iterator(iterator);
iterator std::reverse_iterator::base();
Here's how to update from old code to new (that incorporates the
semantic change), assuming I is an ilist<>::iterator and RI is an
ilist<>::reverse_iterator:
[Old] ==> [New]
reverse_iterator(I) (--I).getReverse()
reverse_iterator(I) ++I.getReverse()
--reverse_iterator(I) I.getReverse()
reverse_iterator(++I) I.getReverse()
RI.base() (--RI).getReverse()
RI.base() ++RI.getReverse()
--RI.base() RI.getReverse()
(++RI).base() RI.getReverse()
delete &*RI, RE = end() delete &*RI++
RI->erase(), RE = end() RI++->erase()
=======================================
Note: bundle iterators are out of scope
=======================================
MachineBasicBlock::iterator, also known as
MachineInstrBundleIterator<MachineInstr>, is a wrapper to represent
MachineInstr bundles. The idea is that each operator++ takes you to the
beginning of the next bundle. Implementing a sane reverse iterator for
this is harder than ilist. Here are the options:
- Use std::reverse_iterator<MBB::i>. Store a handle to the beginning of
the next bundle. A call to operator*() runs a loop (usually
operator--() will be called 1 time, for unbundled instructions).
Increment/decrement just works. This is the status quo.
- Store a handle to the final node in the bundle. A call to operator*()
still runs a loop, but it iterates one time fewer (usually
operator--() will be called 0 times, for unbundled instructions).
Increment/decrement just works.
- Make the ilist_sentinel<MachineInstr> *always* store that it's the
sentinel (instead of just in asserts mode). Then the bundle iterator
can sniff the sentinel bit in operator++().
I initially tried implementing the end() option as part of this commit,
but updating iterator/reverse_iterator conversion call sites was
error-prone. I have a WIP series of patches that implements the final
option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280032 91177308-0d34-0410-b5e6-96231b3b80d8
Remove all the dead code around ilist_*sentinel_traits. This is a
follow-up to gutting them as part of r279314 (originally r278974),
staged to prevent broken builds in sub-projects.
Uses were removed from clang in r279457 and lld in r279458.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279473 91177308-0d34-0410-b5e6-96231b3b80d8
Share code for the (mostly problematic) embedded sentinel traits.
- Move the LLVM_NO_SANITIZE("object-size") attribute to
ilist_half_embedded_sentinel_traits and ilist_embedded_sentinel_traits
(previously it spread throughout the code duplication).
- Add an ilist_full_embedded_sentinel_traits which has no UB (but has
the downside of storing the complete node).
- Replace all the custom sentinel traits in LLVM with a declaration of
ilist_sentinel_traits that inherits from one of the embedded sentinel
traits classes.
There are still custom sentinel traits in other LLVM subprojects. I'll
remove those in a follow-up.
Nothing at all should be changing here, this is just rearranging code.
Note that the final goal here is to remove the sentinel traits
altogether, settling on the memory layout of
ilist_half_embedded_sentinel_traits without the UB. This intermediate
step moves the logic into ilist.h.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@278513 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: By generalize the interface, users are able to inject more flexible Node token into the algorithm, for example, a pair of vector<Node>* and index integer. Currently I only migrated SCCIterator to use NodeRef, but more is coming. It's a NFC.
Reviewers: dblaikie, chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22937
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277399 91177308-0d34-0410-b5e6-96231b3b80d8
We didn't have logic to correctly handle CFGs where there was more than
one EH-pad successor (these are novel with WinEH).
There were situations where a register was live in one exceptional
successor but not another but the code as written would only consider
the first exceptional successor it found.
This resulted in split points which were insufficiently early if an
invoke was present.
This fixes PR27501.
N.B. This removes getLandingPadSuccessor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267412 91177308-0d34-0410-b5e6-96231b3b80d8
splitting edges.
MachineBasicBlock::SplitCriticalEdges will crash if a nullptr would have
been passed for the Pass argument. Do not allow that by turning this
argument into a reference.
The alternative would have been to make the Pass a truly optional
argument, but although this is easy to do, I was afraid users using it
like this would not be aware the livness information, dominator tree and
such would silently be broken.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267052 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce canSplitCriticalEdge, so that clients can now query whether or
not a critical edge can be split without actually needing to split it.
This may be useful when gathering information for cost models for
instance.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@267046 91177308-0d34-0410-b5e6-96231b3b80d8
Take MachineInstr by reference instead of by pointer in SlotIndexes and
the SlotIndex wrappers in LiveIntervals. The MachineInstrs here are
never null, so this cleans up the API a bit. It also incidentally
removes a few implicit conversions from MachineInstrBundleIterator to
MachineInstr* (see PR26753).
At a couple of call sites it was convenient to convert to a range-based
for loop over MachineBasicBlock::instr_begin/instr_end, so I added
MachineBasicBlock::instrs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262115 91177308-0d34-0410-b5e6-96231b3b80d8
This is a little embarrassing.
When I reverted r261504 (getIterator() => getInstrIterator()) in
r261567, I did a `git grep` to see if there were new calls to
`getInstrIterator()` that I needed to migrate. There were 10-20 hits,
and I blindly did a `sed ...` before calling `ninja check`.
However, these were `MachineInstrBundleIterator::getInstrIterator()`,
which predated r261567. Perhaps coincidentally, these had an identical
name and return type.
This commit undoes my careless sed and restores
`MachineBasicBlock::iterator::getInstrIterator()`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261577 91177308-0d34-0410-b5e6-96231b3b80d8
Split MachineBasicBlock::bundle_iterator into a separate file, and
rename the class to MachineBundleIterator.
This is a precursor to adding a `MachineInstr::getBundleIterator()`
accessor, which will eventually let us delete the final call to
getNodePtrUnchecked(), and then remove the UB from ilist_iterator.
As a drive-by, I removed an unnecessary second template parameter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261502 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds some missing calls to MBB::normalizeSuccProbs() in several
locations where it should be called. Those places are found by checking if the
sum of successors' probabilities is approximate one in MachineBlockPlacement
pass with some instrumented code (not in this patch).
Differential revision: http://reviews.llvm.org/D15259
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255455 91177308-0d34-0410-b5e6-96231b3b80d8
computeRegisterLiveness() was broken in that it reported dead for a
register even if a subregister was alive. I assume this was because the
results of analayzePhysRegs() are hard to understand with respect to
subregisters.
This commit: Changes the results of analyzePhysRegs (=struct
PhysRegInfo) to be clearly understandable, also renames the fields to
avoid silent breakage of third-party code (and improve the grammar).
Fix all (two) users of computeRegisterLiveness() in llvm: By reenabling
it and removing workarounds for the bug.
This fixes http://llvm.org/PR24535 and http://llvm.org/PR25033
Differential Revision: http://reviews.llvm.org/D15320
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255362 91177308-0d34-0410-b5e6-96231b3b80d8
(This is the second attempt to submit this patch. The first caused two assertion
failures and was reverted. See https://llvm.org/bugs/show_bug.cgi?id=25687)
The patch in http://reviews.llvm.org/D13745 is broken into four parts:
1. New interfaces without functional changes (http://reviews.llvm.org/D13908).
2. Use new interfaces in SelectionDAG, while in other passes treat probabilities
as weights (http://reviews.llvm.org/D14361).
3. Use new interfaces in all other passes.
4. Remove old interfaces.
This patch is 3+4 above. In this patch, MBB won't provide weight-based
interfaces any more, which are totally replaced by probability-based ones.
The interface addSuccessor() is redesigned so that the default probability is
unknown. We allow unknown probabilities but don't allow using it together
with known probabilities in successor list. That is to say, we either have a
list of successors with all known probabilities, or all unknown
probabilities. In the latter case, we assume each successor has 1/N
probability where N is the number of successors. An assertion checks if the
user is attempting to add a successor with the disallowed mixed use as stated
above. This can help us catch many misuses.
All uses of weight-based interfaces are now updated to use probability-based
ones.
Differential revision: http://reviews.llvm.org/D14973
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254377 91177308-0d34-0410-b5e6-96231b3b80d8
and the follow-up r254356: "Fix a bug in MachineBlockPlacement that may cause assertion failure during BranchProbability construction."
Asserts were firing in Chromium builds. See PR25687.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254366 91177308-0d34-0410-b5e6-96231b3b80d8
The patch in http://reviews.llvm.org/D13745 is broken into four parts:
1. New interfaces without functional changes (http://reviews.llvm.org/D13908).
2. Use new interfaces in SelectionDAG, while in other passes treat probabilities
as weights (http://reviews.llvm.org/D14361).
3. Use new interfaces in all other passes.
4. Remove old interfaces.
This patch is 3+4 above. In this patch, MBB won't provide weight-based
interfaces any more, which are totally replaced by probability-based ones.
The interface addSuccessor() is redesigned so that the default probability is
unknown. We allow unknown probabilities but don't allow using it together
with known probabilities in successor list. That is to say, we either have a
list of successors with all known probabilities, or all unknown
probabilities. In the latter case, we assume each successor has 1/N
probability where N is the number of successors. An assertion checks if the
user is attempting to add a successor with the disallowed mixed use as stated
above. This can help us catch many misuses.
All uses of weight-based interfaces are now updated to use probability-based
ones.
Differential revision: http://reviews.llvm.org/D14973
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254348 91177308-0d34-0410-b5e6-96231b3b80d8
Re-implement `ilist_node::getNextNode()` and `getPrevNode()` without
relying on the sentinel having a "next" pointer. Instead, get access to
the owning list and compare against the `begin()` and `end()` iterators.
This only works when the node *can* get access to the owning list. The
new support is in `ilist_node_with_parent<>`, and any class `Ty`
inheriting from `ilist_node<NodeTy>` that wants `getNextNode()` and/or
`getPrevNode()` should inherit from
`ilist_node_with_parent<NodeTy, ParentTy>` instead. The requirements:
- `NodeTy` must have a `getParent()` function that returns the parent.
- `ParentTy` must have a `getSublistAccess()` static that, given a(n
ignored) `NodeTy*` (to determine which list), returns a member field
pointer to the appropriate `ilist<>`.
This isn't the cleanest way to get access to the owning list, but it
leverages the API already used in the IR hierarchy (see, e.g.,
`Instruction::getSublistAccess()`).
If anyone feels like ripping out the calls to `getNextNode()` and
`getPrevNode()` and replacing with direct iterator logic, they can also
remove the access function, etc., but as an incremental step, I'm
maintaining the API where it's currently used in tree.
If these requirements are *not* met, call sites with access to the ilist
can call `iplist<NodeTy>::getNextNode(NodeTy*)` directly, as in
ilistTest.cpp.
Why rewrite this?
The old code was broken, calling `getNext()` on a sentinel that possibly
didn't have a "next" pointer at all! The new code avoids that
particular flavour of UB (see the commit message for r252538 for more
details about the "lucky" memory layout that made this function so
interesting).
There's still some UB here: the end iterator gets downcast to `NodeTy*`,
even when it's a sentinel (which is typically
`ilist_half_node<NodeTy*>`). I'll tackle that in follow-up commits.
See this llvm-dev thread for more details:
http://lists.llvm.org/pipermail/llvm-dev/2015-October/091115.html
What's the danger?
There might be some code that relies on `getNextNode()` or
`getPrevNode()` *never* returning `nullptr` -- i.e., that relies on them
being broken when the sentinel is an `ilist_half_node<NodeTy>`. I tried
to root out those cases with the audits I did leading up to r252380, but
it's possible I missed one or two. I hope not.
(If (1) you have out-of-tree code, (2) you've reverted r252380
temporarily, and (3) you get some weird crashes with this commit, then I
recommend un-reverting r252380 and auditing the compile errors looking
for "strange" implicit conversions.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252694 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In this implementation, LiveIntervalAnalysis invents a few register
masks on basic block boundaries that preserve no registers. The nice
thing about this is that it prevents the prologue inserter from thinking
it needs to spill all XMM CSRs, because it doesn't see any explicit
physreg defs in the MI.
Reviewers: MatzeB, qcolombet, JosephTremoulet, majnemer
Subscribers: MatzeB, llvm-commits
Differential Revision: http://reviews.llvm.org/D14407
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252318 91177308-0d34-0410-b5e6-96231b3b80d8
When optimization is disabled, edge weights that are stored in MBB won't be used so that we don't have to store them. Currently, this is done by adding successors with default weight 0, and if all successors have default weights, the weight list will be empty. But that the weight list is empty doesn't mean disabled optimization (as is stated several times in MachineBasicBlock.cpp): it may also mean all successors just have default weights.
We should discourage using default weights when adding successors, because it is very easy for users to forget update the correct edge weights instead of using default ones (one exception is that the MBB only has one successor). In order to detect such usages, it is better to differentiate using default weights from the case when optimizations is disabled.
In this patch, a new interface addSuccessorWithoutWeight(MBB*) is created for when optimization is disabled. In this case, MBB will try to maintain an empty weight list, but it cannot guarantee this as for many uses of addSuccessor() whether optimization is disabled or not is not checked. But it can guarantee that if optimization is enabled, then the weight list always has the same size of the successor list.
Differential revision: http://reviews.llvm.org/D13963
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251429 91177308-0d34-0410-b5e6-96231b3b80d8
Start removing implicit conversions to/from list iterators in CodeGen,
ala r249782 for IR. A lot more to go after this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249851 91177308-0d34-0410-b5e6-96231b3b80d8
Nothing inherits from `MachineBasicBlock`, so this should have no real
functionality change. Just makes the code easier to understand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@249473 91177308-0d34-0410-b5e6-96231b3b80d8
