This header includes CodeGen headers, and is not, itself, included by
any Target headers, so move it into CodeGen to match the layering of its
implementation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317647 91177308-0d34-0410-b5e6-96231b3b80d8
Add a helper for building simple binary ops like add, mul, sub, and.
This can be used in the future for quickly adding support for or, xor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307139 91177308-0d34-0410-b5e6-96231b3b80d8
It looks like there are two target-independent but not GISel instructions that
need legalization, IMPLICIT_DEF and PHI. These are already anomalies since
their operands have important LLTs attached, so to make things more uniform it
seems like a good idea to add generic variants. Starting with G_IMPLICIT_DEF.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306875 91177308-0d34-0410-b5e6-96231b3b80d8
Without this check, COPY instructions can actually be one of the generic casts
in disguise. That's confusing and bad.
At some point during ISel this restriction has to be relaxed since the fully
selected instructions will usually use COPY for those purposes. Right now I
think it's possible that relaxation occurs during RegBankSelect (hence the
change there). I'm not convinced that's where it belongs long-term though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306470 91177308-0d34-0410-b5e6-96231b3b80d8
This is the dual problem to legalizing G_INSERTs so most of the code and
testing was cribbed from there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306328 91177308-0d34-0410-b5e6-96231b3b80d8
G_SEQUENCE is going away soon so as a first step the MachineIRBuilder needs to
be taught how to emulate it with alternatives. We use G_MERGE_VALUES where
possible, and a sequence of G_INSERTs if not.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306119 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When legalizing G_LOAD/G_STORE using NarrowScalar, we should avoid emitting
%0 = G_CONSTANT ty 0
%1 = G_GEP %x, %0
since it's cheaper to not emit the redundant instructions than it is to fold them
away later.
Reviewers: qcolombet, t.p.northover, ab, rovka, aditya_nandakumar, kristof.beyls
Reviewed By: qcolombet
Subscribers: javed.absar, llvm-commits, igorb
Differential Revision: https://reviews.llvm.org/D32746
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305340 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes PR32471.
As comment 10 on that bug report highlights
(https://bugs.llvm.org//show_bug.cgi?id=32471#c10), there are quite a
few different defendable design tradeoffs that could be made, including
not representing pointers at all in LLT.
I decided to go for representing vector-of-pointer as a concept in LLT,
while keeping the size of the LLT type 64 bits (this is an increase from
48 bits before). My rationale for keeping pointers explicit is that on
some targets probably it's very handy to have the distinction between
pointer and non-pointer (e.g. 68K has a different register bank for
pointers IIRC). If we keep a scalar pointer, it probably is easiest to
also have a vector-of-pointers to keep LLT relatively conceptually clean
and orthogonal, while we don't have a very strong reason to break that
orthogonality. Once we gain more experience on the use of LLT, we can
of course reconsider this direction.
Rejecting vector-of-pointer types in the IRTranslator is also an option
to avoid the crash reported in PR32471, but that is only a very
short-term solution; also needs quite a bit of code tweaks in places,
and is probably fragile. Therefore I didn't consider this the best
option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300664 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts r300535 and r300537.
The newly added tests in test/CodeGen/AArch64/GlobalISel/arm64-fallback.ll
produces slightly different code between LLVM versions being built with different compilers.
E.g., dependent on the compiler LLVM is built with, either one of the following
can be produced:
remark: <unknown>:0:0: unable to legalize instruction: %vreg0<def>(p0) = G_EXTRACT_VECTOR_ELT %vreg1, %vreg2; (in function: vector_of_pointers_extractelement)
remark: <unknown>:0:0: unable to legalize instruction: %vreg2<def>(p0) = G_EXTRACT_VECTOR_ELT %vreg1, %vreg0; (in function: vector_of_pointers_extractelement)
Non-determinism like this is clearly a bad thing, so reverting this until
I can find and fix the root cause of the non-determinism.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300538 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes PR32471.
As comment 10 on that bug report highlights
(https://bugs.llvm.org//show_bug.cgi?id=32471#c10), there are quite a
few different defendable design tradeoffs that could be made, including
not representing pointers at all in LLT.
I decided to go for representing vector-of-pointer as a concept in LLT,
while keeping the size of the LLT type 64 bits (this is an increase from
48 bits before). My rationale for keeping pointers explicit is that on
some targets probably it's very handy to have the distinction between
pointer and non-pointer (e.g. 68K has a different register bank for
pointers IIRC). If we keep a scalar pointer, it probably is easiest to
also have a vector-of-pointers to keep LLT relatively conceptually clean
and orthogonal, while we don't have a very strong reason to break that
orthogonality. Once we gain more experience on the use of LLT, we can
of course reconsider this direction.
Rejecting vector-of-pointer types in the IRTranslator is also an option
to avoid the crash reported in PR32471, but that is only a very
short-term solution; also needs quite a bit of code tweaks in places,
and is probably fragile. Therefore I didn't consider this the best
option.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300535 91177308-0d34-0410-b5e6-96231b3b80d8
For vector operands, the `select` instruction supports both vector and
non-vector conditions. The MIR builder had an overly restrictive
assertion, that only accepted vector conditions for vector selects
(in effect implementing ISD::VSELECT).
Make it possible to express the full range of G_SELECTs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297207 91177308-0d34-0410-b5e6-96231b3b80d8
When a dbg_value has a constant operand that isn't representable in MI,
there isn't much we can do. Use %noreg (0) for those situations.
This matches the SelectionDAG behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297200 91177308-0d34-0410-b5e6-96231b3b80d8
A bit more painful than G_INSERT because it was more widely used, but this
should simplify the handling of extract operations in most locations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297100 91177308-0d34-0410-b5e6-96231b3b80d8
Before, we were producing G_INSERT instructions that were actually closer to a
cast or even a COPY when both input and output sizes are the same. This doesn't
really make sense and means that everything interpreting a G_INSERT also has to
handle all these kinds of casts.
So now we detect these degenerate cases and emit real casts instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297051 91177308-0d34-0410-b5e6-96231b3b80d8
It's much easier to reason about single-value inserts and no-one was actually
using the variadic variants before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296923 91177308-0d34-0410-b5e6-96231b3b80d8
These are simplified variants of the current G_SEQUENCE and G_EXTRACT, which
assume the individual parts will be contiguous, homogeneous, and occupy the
entirity of the larger register. This makes reasoning about them much easer
since you only have to look at the first register being merged and the result
to know what the instruction is doing.
I intend to gradually replace all uses of the more complicated sequence/extract
with these (or single-element insert/extracts), and then remove the older
variants. For now we start with legalization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296921 91177308-0d34-0410-b5e6-96231b3b80d8
This instruction clears the low bits of a pointer without requiring (possibly
dodgy if pointers aren't ints) conversions to and from an integer. Since (as
far as I'm aware) all masks are statically known, the instruction takes an
immediate operand rather than a register to specify the mask.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@295103 91177308-0d34-0410-b5e6-96231b3b80d8
The translation scheme is mostly cribbed from FastISel, and it's not entirely
convincing semantically. But it does seem to work in the common cases and allow
variables to be printed so it can't be all wrong.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293228 91177308-0d34-0410-b5e6-96231b3b80d8
With some minor manual fixes for using function_ref instead of
std::function. No functional change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291904 91177308-0d34-0410-b5e6-96231b3b80d8
MachineIRBuilder had weird before/after and beginning/end flags for the insert
point. Unfortunately the non-default means that instructions will be inserted
in reverse order which is almost never what anyone wants.
Really, I think we just want (like IRBuilder has) the ability to insert at any
C++ iterator-style point (i.e. before any instruction or before MBB.end()). So
this fixes MIRBuilders to behave like IRBuilders in this respect.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288980 91177308-0d34-0410-b5e6-96231b3b80d8
This makes it more similar to the floating-point constant, and also allows for
larger constants to be translated later. There's no real functional change in
this patch though, just syntax updates.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288712 91177308-0d34-0410-b5e6-96231b3b80d8
This should match the existing behaviour for passing complicated struct and
array types, in particular HFAs come through like that from Clang.
For C & C++ we still need to somehow support all the weird ABI flags, or at
least those that are present in the IR (signext, byval, ...), and stack-based
parameter passing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281977 91177308-0d34-0410-b5e6-96231b3b80d8
Unlike SDag, we use a separate G_GEP instruction (much simplified, only taking
a single byte offset) to preserve the pointer type information through
selection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281205 91177308-0d34-0410-b5e6-96231b3b80d8
We want each register to have a canonical type, which means the best place to
store this is in MachineRegisterInfo rather than on every MachineInstr that
happens to use or define that register.
Most changes following from this are pretty simple (you need an MRI anyway if
you're going to be doing any transformations, so just check the type there).
But legalization doesn't really want to check redundant operands (when, for
example, a G_ADD only ever has one type) so I've made use of MCInstrDesc's
operand type field to encode these constraints and limit legalization's work.
As an added bonus, more validation is possible, both in MachineVerifier and
MachineIRBuilder (coming soon).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281035 91177308-0d34-0410-b5e6-96231b3b80d8
More preparation for dropping source types from MachineInstrs: regsters coming
out of already-selected code (i.e. non-generic instructions) don't have a type,
but that information is needed so we must add it manually.
This is done via a new G_TYPE instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280292 91177308-0d34-0410-b5e6-96231b3b80d8
Legalization ends up creating many G_SEQUENCE/G_EXTRACT pairs which leads to
inefficient codegen (even for -O0), so add a quick pass over the function to
remove them again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280155 91177308-0d34-0410-b5e6-96231b3b80d8
They really should have both types represented, but early variants were created
before MachineInstrs could have multiple types so they're rather ambiguous.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279567 91177308-0d34-0410-b5e6-96231b3b80d8
