Summary:
The removed code checks that we are able to handle a 64-bit number, but
the code we're calling takes two dwords (for a total of 64 bits), so this
is always true.
Reviewers: zturner, rnk, majnemer, compnerd
Reviewed By: zturner
Subscribers: amccarth, hiraditya, lebedev.ri, llvm-commits
Differential Revision: https://reviews.llvm.org/D39263
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316814 91177308-0d34-0410-b5e6-96231b3b80d8
In r315079 I added a check for the ERROR_CALL_NOT_IMPLEMENTED error
code, but it turns out earlier versions of Wine just returned false
without setting any error code.
This patch handles the unset error code case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315597 91177308-0d34-0410-b5e6-96231b3b80d8
In r315079, fs::rename was reimplemented in terms of CreateFile and
SetFileInformationByHandle. Unfortunately, the latter isn't supported by
Wine. This adds a fallback to MoveFileEx for that case.
Differential Revision: https://reviews.llvm.org/D38817
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315520 91177308-0d34-0410-b5e6-96231b3b80d8
This allows clients to avoid an unnecessary fs::status() call on each
directory entry. Because the information returned by FindFirstFileEx
is a subset of the information returned by a regular status() call,
I needed to extract a base class from file_status that contains only
that information.
On my machine, this reduces the time required to enumerate a ThinLTO
cache directory containing 520k files from almost 4 minutes to less
than 2 seconds.
Differential Revision: https://reviews.llvm.org/D38716
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315378 91177308-0d34-0410-b5e6-96231b3b80d8
Microsoft's debug implementation of std::copy checks if the destination is an
array and then does some bounds checking. This was causing an assertion
failure in fs::rename_internal which copies to a buffer of the appropriate
size but that's type-punned to an array of length 1 for API compatibility
reasons.
Fix is to make make the destination a pointer rather than an array.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315222 91177308-0d34-0410-b5e6-96231b3b80d8
The current implementation of rename uses ReplaceFile if the
destination file already exists. According to the documentation for
ReplaceFile, the source file is opened without a sharing mode. This
means that there is a short interval of time between when ReplaceFile
renames the file and when it closes the file during which the
destination file cannot be opened.
This behaviour is not POSIX compliant because rename is supposed
to be atomic. It was also causing intermittent link failures when
linking with a ThinLTO cache; the ThinLTO cache implementation expects
all cache files to be openable.
This patch addresses that problem by re-implementing rename
using CreateFile and SetFileInformationByHandle. It is roughly a
reimplementation of ReplaceFile with a better sharing policy as well
as support for renaming in the case where the destination file does
not exist.
This implementation is still not fully POSIX. Specifically in the case
where the destination file is open at the point when rename is called,
there will be a short interval of time during which the destination
file will not exist. It isn't clear whether it is possible to avoid
this using the Windows API.
Differential Revision: https://reviews.llvm.org/D38570
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315079 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The function widenPath() for Windows also normalizes long path names by
iterating over the path's components and calling append(). The
assumption during the iteration that separators are not returned by the
iterator doesn't hold because the iterators do return a separator when
the path has a drive name. Handle this case by ignoring separators
during iteration.
Reviewers: rnk
Subscribers: danalbert, srhines
Differential Revision: https://reviews.llvm.org/D36752
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311382 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Tools like clang that use RemoveFileOnSignal on their output files
weren't actually able to clean up their outputs before this change. Now
the call to llvm::sys::fs::remove succeeds and the temporary file is
deleted. This is a stop-gap to fix clang before implementing the
solution outlined in PR34070.
Reviewers: davide
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D36337
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310137 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
It was added to support clang warnings about includes with case
mismatches, but it ended up not being necessary.
Reviewers: twoh, rafael
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D36328
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310078 91177308-0d34-0410-b5e6-96231b3b80d8
Previously which path syntax we supported dependend on what
platform we were compiling LLVM on. While this is normally
desirable, there are situations where we need to be able to
handle a path that we know was generated on a remote host.
Remote debugging, for example, or parsing debug info.
99% of the code in LLVM for handling paths was platform
agnostic and literally just a few branches were gated behind
pre-processor checks, so this changes those sites to use
runtime checks instead, and adds a flag to every path
API that allows one to override the host native syntax.
Differential Revision: https://reviews.llvm.org/D30858
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298004 91177308-0d34-0410-b5e6-96231b3b80d8
This change adds support for functions to set and get file permissions, in a similar manner to the C++17 permissions() function in <filesystem>. The setter uses chmod on Unix systems and SetFileAttributes on Windows, setting the permissions as passed in. The getter simply uses the existing status() function.
Prior to this change, status() would always return an unknown value for the permissions on a Windows file, making it impossible to test the new function on Windows. I have therefore added support for this as well. On Linux, prior to this change, the permissions included the file type, which should actually be accessed via a different member of the file_status class.
Note that on Windows, only the *_write permission bits have any affect - if any are set, the file is writable, and if not, the file is read-only. This is in common with what MSDN describes for their behaviour of std::filesystem::permissions(), and also what boost::filesystem does.
The motivation behind this change is so that we can easily test behaviour on read-only files in LLVM unit tests, but I am sure that others may find it useful in some situations.
Reviewers: zturner, amccarth, aaron.ballman
Differential Revision: https://reviews.llvm.org/D30736
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297945 91177308-0d34-0410-b5e6-96231b3b80d8
In openFileForRead, we would not previously return an error
if real_path resolution failed. After a recent patch, we
started propagating this error up. This caused a failure
in clang when trying to call openFileForRead("nul"). This
patch restores the previous behavior of not propagating this
error up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297488 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM already has real_path like functionality, but it is
cumbersome to use and involves clean up after (e.g. you have
to call openFileForRead, then close the resulting FD).
Furthermore, on Windows it doesn't work for directories since
opening a directory and opening a file require slightly
different flags.
So I add a simple function `real_path` which works for all
paths on all platforms and has a simple to use interface.
In doing so, I add the ability to opt in to resolving tilde
expressions (e.g. ~/foo), which are normally handled by
the shell.
Differential Revision: https://reviews.llvm.org/D30668
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297483 91177308-0d34-0410-b5e6-96231b3b80d8
We already have a function create_directories() which can create
an entire tree, and remove() which can remove an empty directory,
but we do not have remove_directories() which can remove an entire
tree. This patch adds such a function.
Because removing a directory tree can have dangerous consequences
when the tree contains a directory symlink, the patch here updates
the existing directory_iterator construct to optionally not follow
symlinks (previously it would always follow symlinks). The delete
algorithm uses this flag so that for symlinks, only the links are
removed, and not the targets.
On Windows this is implemented with SHFileOperation, which also
does not recurse into symbolic links or junctions.
Differential Revision: https://reviews.llvm.org/D30676
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297314 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This adds a cross-platform way of setting the current working directory
analogous to the existing current_path() function used for retrieving
it. The function will be used in lldb.
Reviewers: rafael, silvas, zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29035
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292907 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The motivation is to support better the -object_path_lto option on
Darwin. The linker needs to write down the generate object files on
disk for later use by lldb or dsymutil (debug info are not present
in the final binary). We're moving this into libLTO so that we can
be smarter when a cache is enabled and hard-link when possible
instead of duplicating the files.
Reviewers: tejohnson, deadalnix, pcc
Subscribers: dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D27507
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289631 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is a follow-up to D25416. It removes all usages of TimeValue from
llvm/Support library (except for the actual TimeValue declaration), and replaces
them with appropriate usages of std::chrono. To facilitate this, I have added
small utility functions for converting time points and durations into appropriate
OS-specific types (FILETIME, struct timespec, ...).
Reviewers: zturner, mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25730
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284966 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch changes the behavior of path::system_temp_directory() on Windows to be closer to GetTempPath Windows API call. Enforces path separator to be the native one, makes path absolute, etc. GetTempPath is not used directly because of limitations/implementation bugs on Windows 7.
Windows specific unit tests are added. Most of them runs in separated process with modified environment variables.
This change fixes FileSystemTest.CreateDir unittest that had been failing when run from Unix-like shell on Windows (Unix-like path separator (/) used in env variables).
Reviewers: chapuni, rafael, aaron.ballman
Subscribers: rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D14231
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253345 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In general GetTempDir follows the same logic as the replaced code: checks env variables TMP, TEMP, USERPROFILE in order. However, it also perform other checks like making separators native (\), making the path absolute, etc.
This change fixes FileSystemTest.CreateDir unittest that had been failing when run from Unix-like shell on Windows (Unix-like path separator (/) used in env variables).
Reviewers: chapuni, rafael, aaron.ballman
Subscribers: rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D14231
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252366 91177308-0d34-0410-b5e6-96231b3b80d8
