Summary:
The cost calculation for default case on X86 target does not always
follow correct wayt because of missing 4-th argument in
`BaseT::getCastInstrCost()` call. Added this missing parameter.
Reviewers: hfinkel, mkuper, RKSimon, spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39687
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317576 91177308-0d34-0410-b5e6-96231b3b80d8
- Targets that want to support memcmp expansions now return the list of
supported load sizes.
- Expansion codegen does not assume that all power-of-two load sizes
smaller than the max load size are valid. For examples, this is not the
case for x86(32bit)+sse2.
Fixes PR34887.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316905 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds accurate instructions cost.
The formula presents two cases(stride 3 and stride 4) and calculates the cost according to the VF and stride.
Reviewers:
1. delena
2. Farhana
3. zvi
4. dorit
5. Ayal
Differential Revision: https://reviews.llvm.org/D38762
Change-Id: If4cfbd4ac0e63694e8144cb78c7fa34850647ff7
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316072 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Right now there are two functions with the same name, one does the work
and the other one returns true if expansion is needed. Rename
TargetTransformInfo::expandMemCmp to make it more consistent with other
members of TargetTransformInfo.
Remove the unused Instruction* parameter.
Differential Revision: https://reviews.llvm.org/D38165
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314096 91177308-0d34-0410-b5e6-96231b3b80d8
This is intended to be a superset of the functionality from D31037 (EarlyCSE) but implemented
as an independent pass, so there's no stretching of scope and feature creep for an existing pass.
I also proposed a weaker version of this for SimplifyCFG in D30910. And I initially had almost
this same functionality as an addition to CGP in the motivating example of PR31028:
https://bugs.llvm.org/show_bug.cgi?id=31028
The advantage of positioning this ahead of SimplifyCFG in the pass pipeline is that it can allow
more flattening. But it needs to be after passes (InstCombine) that could sink a div/rem and
undo the hoisting that is done here.
Decomposing remainder may allow removing some code from the backend (PPC and possibly others).
Differential Revision: https://reviews.llvm.org/D37121
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312862 91177308-0d34-0410-b5e6-96231b3b80d8
SLP vectorizer supports horizontal reductions for Add/FAdd binary
operations. Patch adds support for horizontal min/max reductions.
Function getReductionCost() is split to getArithmeticReductionCost() for
binary operation reductions and getMinMaxReductionCost() for min/max
reductions.
Patch fixes PR26956.
Differential revision: https://reviews.llvm.org/D27846
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312791 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Add patterns for
fptoui <16 x float> to <16 x i8>
fptoui <16 x float> to <16 x i16>
Reviewers: igorb, delena, craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37505
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312704 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We add the precise cache sizes and associativity for the following Intel
architectures:
- Penry
- Nehalem
- Westmere
- Sandy Bridge
- Ivy Bridge
- Haswell
- Broadwell
- Skylake
- Kabylake
Polly uses since several months a performance model for BLAS computations that
derives optimal cache and register tile sizes from cache and latency
information (based on ideas from "Analytical Modeling Is Enough for High-Performance BLIS", by Tze Meng Low published at TOMS 2016).
While bootstrapping this model, these target values have been kept in Polly.
However, as our implementation is now rather mature, it seems time to teach
LLVM itself about cache sizes.
Interestingly, L1 and L2 cache sizes are pretty constant across
micro-architectures, hence a set of architecture specific default values
seems like a good start. They can be expanded to more target specific values,
in case certain newer architectures require different values. For now a set
of Intel architectures are provided.
Just as a little teaser, for a simple gemm kernel this model allows us to
improve performance from 1.2s to 0.27s. For gemm kernels with less optimal
memory layouts even larger speedups can be reported.
Reviewers: Meinersbur, bollu, singam-sanjay, hfinkel, gareevroman, fhahn, sebpop, efriedma, asb
Reviewed By: fhahn, asb
Subscribers: lsaba, asb, pollydev, llvm-commits
Differential Revision: https://reviews.llvm.org/D37051
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311647 91177308-0d34-0410-b5e6-96231b3b80d8
Add missing SK_PermuteSingleSrc costs for AVX2 targets and earlier, also added some of the simpler SK_PermuteTwoSrc costs to support splitting of SK_PermuteSingleSrc shuffles
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310632 91177308-0d34-0410-b5e6-96231b3b80d8
The cost of an interleaved access was only implemented for AVX512. For other
X86 targets an overly conservative Base cost was returned, resulting in
avoiding vectorization where it is actually profitable to vectorize.
This patch starts to add costs for AVX2 for most prominent cases of
interleaved accesses (stride 3,4 chars, for now).
Note1: Improvements of up to ~4x were observed in some of EEMBC's rgb
workloads; There is also a known issue of 15-30% degradations on some of these
workloads, associated with an interleaved access followed by type
promotion/widening; the resulting shuffle sequence is currently inefficient and
will be improved by a series of patches that extend the X86InterleavedAccess pass
(such as D34601 and more to follow).
Note 2: The costs in this patch do not reflect port pressure penalties which can
be very dominant in the case of interleaved accesses since most of the shuffle
operations are restricted to a single port. Further tuning, that may incorporate
these considerations, will be done on top of the upcoming improved shuffle
sequences (that is, along with the abovementioned work to extend
X86InterleavedAccess pass).
Differential Revision: https://reviews.llvm.org/D34023
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306238 91177308-0d34-0410-b5e6-96231b3b80d8
There are a couple of potential improvements as seen in the IR and asm:
1. We're unnecessarily extending to a larger type to compare values.
2. The codegen for (select cond, 1, -1) could avoid a cmov.
(or we could change the order of the compares, so we have a select with 0 operand)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305802 91177308-0d34-0410-b5e6-96231b3b80d8
This seems to be interacting badly with ASan somehow, causing false reports of
heap-buffer overflows: PR33514.
> Summary:
> The patch makes instruction count the highest priority for
> LSR solution for X86 (previously registers had highest priority).
>
> Reviewers: qcolombet
>
> Differential Revision: http://reviews.llvm.org/D30562
>
> From: Evgeny Stupachenko <evstupac@gmail.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305720 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Expanding the loop idiom test for memcpy to also recognize
unordered atomic memcpy. The only difference for recognizing
an unordered atomic memcpy and instead of a normal memcpy is
that the loads and/or stores involved are unordered atomic operations.
Background: http://lists.llvm.org/pipermail/llvm-dev/2017-May/112779.html
Patch by Daniel Neilson!
Reviewers: reames, anna, skatkov
Reviewed By: reames, anna
Subscribers: llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D33243
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304806 91177308-0d34-0410-b5e6-96231b3b80d8
Account for subvector extraction/insertion, helps prevent the vectorizers from selecting 256-bit vectors that will have to be split anyhow on AVX1 targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302378 91177308-0d34-0410-b5e6-96231b3b80d8
getArithmeticInstrCost(), getShuffleCost(), getCastInstrCost(),
getCmpSelInstrCost(), getVectorInstrCost(), getMemoryOpCost(),
getInterleavedMemoryOpCost() implemented.
Interleaved access vectorization enabled.
BasicTTIImpl::getCastInstrCost() improved to check for legal extending loads,
in which case the cost of the z/sext instruction becomes 0.
Review: Ulrich Weigand, Renato Golin.
https://reviews.llvm.org/D29631
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300052 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
LSV wants to know the maximum size that can be loaded to a vector register.
On X86, this always matches the maximum register width. Implement this
accordingly and add a test to make sure that LSV can vectorize up to the
maximum permissible width on X86.
Reviewers: delena, arsenm
Reviewed By: arsenm
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D31504
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299589 91177308-0d34-0410-b5e6-96231b3b80d8
getIntrinsicInstrCost() used to only compute scalarization cost based on types.
This patch improves this so that the actual arguments are checked when they are
available, in order to handle only unique non-constant operands.
Tests updates:
Analysis/CostModel/X86/arith-fp.ll
Transforms/LoopVectorize/AArch64/interleaved_cost.ll
Transforms/LoopVectorize/ARM/interleaved_cost.ll
The improvement in getOperandsScalarizationOverhead() to differentiate on
constants made it necessary to update the interleaved_cost.ll tests even
though they do not relate to intrinsics.
Review: Hal Finkel
https://reviews.llvm.org/D29540
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297705 91177308-0d34-0410-b5e6-96231b3b80d8
Refactoring to remove duplications of this method.
New method getOperandsScalarizationOverhead() that looks at the present unique
operands and add extract costs for them. Old behaviour was to just add extract
costs for one operand of the type always, which still happens in
getArithmeticInstrCost() if no operands are provided by the caller.
This is a good start of improving on this, but there are more places
that can be improved by using getOperandsScalarizationOverhead().
Review: Hal Finkel
https://reviews.llvm.org/D29017
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293155 91177308-0d34-0410-b5e6-96231b3b80d8
