In 2010 a commit with no testcase and no further explanation
explicitly disabled the handling of inlined variables in
EmitFuncArgumentDbgValue(). I don't think there is a good reason for
this any more and re-enabling this adds debug locations for variables
associated with an LLVM function argument in functions that are
inlined into the first basic block. The only downside of doing this is
that we may insert a DBG_VALUE before the inlined scope, but (1) this
could be filtered out later, and (2) LiveDebugValues will not
propagate it into subsequent basic blocks if they don't dominate the
variable's lexical scope, so this seems like a small price to pay.
rdar://problem/26228128
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317702 91177308-0d34-0410-b5e6-96231b3b80d8
We can't safely split arithmetic into multiple fragments because we
can't express carry-over between fragments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317534 91177308-0d34-0410-b5e6-96231b3b80d8
This preserves the debug info for the cast operation in the original location.
rdar://problem/33460652
Reapplied r317340 with the test moved into an ARM-specific directory.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317375 91177308-0d34-0410-b5e6-96231b3b80d8
This cl::opt has been dead for a while. It's no longer possible to run
the verifier without also verifying debug info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317288 91177308-0d34-0410-b5e6-96231b3b80d8
Change the map key from DIFile* to the absolute path string. Computing
the absolute path isn't expensive because we already have a map that
caches the full path keyed on DIFile*.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317041 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to how llvm::salvagDebugInfo hooks into InstCombine, this adds
a hook that can be invoked before an SDNode that is associated with an
SDDbgValue is erased to capture the effect of the deleted node in a
DIExpression.
The motivating example is an SDDebugValue attached to an ADD operation
that gets folded into a LOAD+OFFSET operation.
rdar://problem/32121503
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316525 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This adds a set of new directives that describe 32-bit x86 prologues.
The directives are limited and do not expose the full complexity of
codeview FPO data. They are merely a convenience for the compiler to
generate more readable assembly so we don't need to generate tons of
labels in CodeGen. If our prologue emission changes in the future, we
can change the set of available directives to suit our needs. These are
modelled after the .seh_ directives, which use a different format that
interacts with exception handling.
The directives are:
.cv_fpo_proc _foo
.cv_fpo_pushreg ebp/ebx/etc
.cv_fpo_setframe ebp/esi/etc
.cv_fpo_stackalloc 200
.cv_fpo_endprologue
.cv_fpo_endproc
.cv_fpo_data _foo
I tried to follow the implementation of ARM EHABI CFI directives by
sinking most directives out of MCStreamer and into X86TargetStreamer.
This helps avoid polluting non-X86 code with WinCOFF specific logic.
I used cdb to confirm that this can show locals in parent CSRs in a few
cases, most importantly the one where we use ESI as a frame pointer,
i.e. the one in http://crbug.com/756153#c28
Once we have cdb integration in debuginfo-tests, we can add integration
tests there.
Reviewers: majnemer, hans
Subscribers: aemerson, mgorny, kristof.beyls, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D38776
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315513 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds printing for DW_AT_type DIEs like it is already the case
for DW_AT_specification DIEs. This is a rather naive approach and only a
start. We should have pretty printers for different languages.
Recommit after being reverted in r315299.
Differential revision: https://reviews.llvm.org/D36993
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315316 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds printing for DW_AT_type DIEs like it is already the case
for DW_AT_specification DIEs. This is a rather naive approach and only a
start. We should have pretty printers for different languages.
Differential revision: https://reviews.llvm.org/D36993
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315297 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds two new verifiers:
- It checks that the root DIE of a CU is actually a valid unit DIE.
(based on its tag)
- For DWARF5 which contains a unit type int he CU header, it checks that
this matches the type of the unit DIE.
Differential revision: https://reviews.llvm.org/D38453
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315121 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When reinserting debug values after register allocation, make sure to
insert debug values after each redefinition of debug value register in
the slot index range. The reason for this is that DwarfDebug will end
the range of a debug variable when the physical reg is defined. For
instructions with e.g. tied operands this result in prematurely ended
debug range.
This resolves pr34545
Patch by Karl-Johan Karlsson and Bjorn Pettersson
Reviewers: rnk, aprantl
Reviewed By: rnk
Subscribers: bjope, llvm-commits
Differential Revision: https://reviews.llvm.org/D38229
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314974 91177308-0d34-0410-b5e6-96231b3b80d8
The list of register ids was previously written out in a couple of dirrent
places. This puts it in a .def file and also adds a few more registers (e.g.
the x87 regs) which should lead to more readable dumps, but I didn't include
the whole list since that seems unnecessary.
X86_MC::initLLVMToSEHAndCVRegMapping is pretty ugly, but at least it's not
relying on magic constants anymore. The TODO of using tablegen still stands.
Differential revision: https://reviews.llvm.org/D38480
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314821 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This should fix a regression introduced by r313786, which switched from
MachineInstr::isIndirectDebugValue() to checking if operand 1 is an
immediate. I didn't have a test case for it until now.
A single UserValue, which approximates a user variable, may have many
DBG_VALUE instructions that disagree about whether the variable is in
memory or in a virtual register. This will become much more common once
we have llvm.dbg.addr, but you can construct such a test case manually
today with llvm.dbg.value.
Before this change, we would get two UserValues: one for direct and one
for indirect DBG_VALUE instructions describing the same variable. If we
build separate interval maps for direct and indirect locations, we will
end up accidentally coalescing identical DBG_VALUE intervals that need
to remain separate because they are broken up by intervals of the
opposite direct-ness.
Reviewers: aprantl
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D37932
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314819 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r314729.
Another bug has been encountered in an out-of-tree target reported by Quentin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314814 91177308-0d34-0410-b5e6-96231b3b80d8
Issues addressed since original review:
- Avoid bug in regalloc greedy/machine verifier when forwarding to use
in an instruction that re-defines the same virtual register.
- Fixed bug when forwarding to use in EarlyClobber instruction slot.
- Fixed incorrect forwarding to register definitions that showed up in
explicit_uses() iterator (e.g. in INLINEASM).
- Moved removal of dead instructions found by
LiveIntervals::shrinkToUses() outside of loop iterating over
instructions to avoid instructions being deleted while pointed to by
iterator.
- Fixed ARMLoadStoreOptimizer bug exposed by this change in r311907.
- The pass no longer forwards COPYs to physical register uses, since
doing so can break code that implicitly relies on the physical
register number of the use.
- The pass no longer forwards COPYs to undef uses, since doing so
can break the machine verifier by creating LiveRanges that don't
end on a use (since the undef operand is not considered a use).
[MachineCopyPropagation] Extend pass to do COPY source forwarding
This change extends MachineCopyPropagation to do COPY source forwarding.
This change also extends the MachineCopyPropagation pass to be able to
be run during register allocation, after physical registers have been
assigned, but before the virtual registers have been re-written, which
allows it to remove virtual register COPY LiveIntervals that become dead
through the forwarding of all of their uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314729 91177308-0d34-0410-b5e6-96231b3b80d8
This came out of a recent discussion on llvm-dev
(https://reviews.llvm.org/D38042). Currently the Verifier will strip
the debug info metadata from a module if it finds the dbeug info to be
malformed. This feature is very valuable since it allows us to improve
the Verifier by making it stricter without breaking bcompatibility,
but arguable the Verifier pass should not be modifying the IR. This
patch moves the stripping of broken debug info into AutoUpgrade
(UpgradeDebugInfo to be precise), which is a much better location for
this since the stripping of malformed (i.e., produced by older, buggy
versions of Clang) is a (harsh) form of AutoUpgrade.
This change is mostly NFC in nature, the one big difference is the
behavior when LLVM module passes are introducing malformed debug
info. Prior to this patch, a NoAsserts build would have printed a
warning and stripped the debug info, after this patch the Verifier
will report a fatal error. I believe this behavior is actually more
desirable anyway.
Differential Revision: https://reviews.llvm.org/D38184
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314699 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
A DBG_VALUE that is referring to a physical register is
valid up until the next def of the register, or the end
of the basic block that it belongs to.
LiveDebugVariables is computing live intervals (slot index
ranges) for DBG_VALUE instructions, before regalloc, in order
to be able to re-insert DBG_VALUE instructions again after
regalloc. When the DBG_VALUE is mapping a variable to a
physical register we do not need to compute the range. We
should simply re-insert the DBG_VALUE at the start position.
The problem that was found, resulting in this patch, was a
situation when the DBG_VALUE was the last real use of the
physical register. The computeIntervals/extendDef methods
extended the range to cover the whole basic block, even though
the physical register very well could be allocated to some
virtual register inside the basic block. So the extended
range could not be trusted.
This patch is a preparation for https://reviews.llvm.org/D38229,
where the goal is to insert DBG_VALUE after each new definition
of a variable, even if the virtual registers that the variable
was connected to has been coalesced into using the same physical
register (e.g. due to two address instructions). For more info
see https://bugs.llvm.org/show_bug.cgi?id=34545
Reviewers: aprantl, rnk, echristo
Reviewed By: aprantl
Subscribers: Ka-Ka, llvm-commits
Differential Revision: https://reviews.llvm.org/D38140
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314414 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This code iterates the 'Orders' vector in parallel with the DbgValue
list, emitting all DBG_VALUEs that occurred between the last IR order
insertion point and the next insertion point. This assumes the
SDDbgValue list is sorted in IR order, which it usually is. However, it
is not sorted when a node with a debug value is replaced with another
one. When this happens, TransferDbgValues is called, and the new value
is added to the end of the list.
The problem can be solved by stably sorting the list by IR order.
Reviewers: aprantl, Ka-Ka
Reviewed By: aprantl
Subscribers: MatzeB, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D38197
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314114 91177308-0d34-0410-b5e6-96231b3b80d8
The code wasn't yelling at the user when there's a reference
from a DIGlobalVariableExpression. Thanks to Adrian for the
reduced testcase. Fixes PR34672.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314069 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds dumping of line table instructions as well as the final
state at each specified pc value in verbose mode. This is essentially
the same as the default in Darwin's dwarfdump. Dumping the actual line
table opcodes can be particularly useful for something like debugging a
bad `.debug_line` section.
Differential revision: https://reviews.llvm.org/D37971
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313910 91177308-0d34-0410-b5e6-96231b3b80d8
The fix is to avoid invalidating our insertion point in
replaceDbgDeclare:
Builder.insertDeclare(NewAddress, DIVar, DIExpr, Loc, InsertBefore);
+ if (DII == InsertBefore)
+ InsertBefore = &*std::next(InsertBefore->getIterator());
DII->eraseFromParent();
I had to write a unit tests for this instead of a lit test because the
use list order matters in order to trigger the bug.
The reduced C test case for this was:
void useit(int*);
static inline void inlineme() {
int x[2];
useit(x);
}
void f() {
inlineme();
inlineme();
}
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313905 91177308-0d34-0410-b5e6-96231b3b80d8
.. as well as the two subsequent changes r313826 and r313875.
This leads to segfaults in combination with ASAN. Will forward repro
instructions to the original author (rnk).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313876 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There already was code that tried to remove the dbg.declare, but that code
was placed after we had called
I->replaceAllUsesWith(UndefValue::get(I->getType()));
on the alloca, so when we searched for the relevant dbg.declare, we
couldn't find it.
Now we do the search before we call RAUW so there is a chance to find it.
An existing testcase needed update due to this. Two dbg.declare with undef
were removed and then suddenly one of the two CHECKS failed.
Before this patch we got
call void @llvm.dbg.declare(metadata i24* undef, metadata !14, metadata !DIExpression(DW_OP_LLVM_fragment, 32, 24)), !dbg !15
call void @llvm.dbg.declare(metadata %struct.prog_src_register* undef, metadata !14, metadata !DIExpression()), !dbg !15
call void @llvm.dbg.value(metadata i32 0, metadata !14, metadata !DIExpression(DW_OP_LLVM_fragment, 0, 32)), !dbg !15
call void @llvm.dbg.value(metadata i32 0, metadata !14, metadata !DIExpression(DW_OP_LLVM_fragment, 32, 24)), !dbg !15
and with it we get
call void @llvm.dbg.value(metadata i32 0, metadata !14, metadata !DIExpression(DW_OP_LLVM_fragment, 0, 32)), !dbg !15
call void @llvm.dbg.value(metadata i32 0, metadata !14, metadata !DIExpression(DW_OP_LLVM_fragment, 32, 24)), !dbg !15
However, the CHECKs in the testcase checked things in a silly order, so
they only passed since they found things in the first dbg.declare. Now
we changed the order of the checks and the test passes.
Reviewers: rnk
Reviewed By: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D37900
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313875 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This implements the design discussed on llvm-dev for better tracking of
variables that live in memory through optimizations:
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117222.html
This is tracked as PR34136
llvm.dbg.addr is intended to be produced and used in almost precisely
the same way as llvm.dbg.declare is today, with the exception that it is
control-dependent. That means that dbg.addr should always have a
position in the instruction stream, and it will allow passes that
optimize memory operations on local variables to insert llvm.dbg.value
calls to reflect deleted stores. See SourceLevelDebugging.rst for more
details.
The main drawback to generating DBG_VALUE machine instrs is that they
usually cause LLVM to emit a location list for DW_AT_location. The next
step will be to teach DwarfDebug.cpp how to recognize more DBG_VALUE
ranges as not needing a location list, and possibly start setting
DW_AT_start_offset for variables whose lifetimes begin mid-scope.
Reviewers: aprantl, dblaikie, probinson
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37768
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313825 91177308-0d34-0410-b5e6-96231b3b80d8
After r313775, it's easier to maintain a parallel BitVector of spilled
locations indexed by location number.
I wasn't able to build a good reduced test case for this iteration of
the bug, but I added a more direct assertion that spilled values must
use frame index locations. If this bug reappears, it won't only fire on
the NEON vector code that we detected it on, but on medium-sized
integer-only programs as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313786 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts r313640, originally r313400, one more time for essentially
the same issue. My BitVector of spilled location numbers isn't working
because we coalesce identical DBG_VALUE locations as we rewrite them,
invalidating the location numbers used to index the BitVector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313679 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts r313431 and brings back r313374 with a fix to write
checksums as binary data and not ASCII hex strings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313657 91177308-0d34-0410-b5e6-96231b3b80d8
I forgot to zero out the BitVector when reusing it between UserValues.
Later uses of the same location number for a different UserValue would
falsely indicate that they were spilled. Usually this would lead to
incorrect debug info, but in some cases they would indicate something
nonsensical like a memory location based on a vector register (Q8 on
ARM).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313640 91177308-0d34-0410-b5e6-96231b3b80d8
This caused asserts in Chromium. See http://crbug.com/766261
> Summary:
> This comes up in optimized debug info for C++ programs that pass and
> return objects indirectly by address. In these programs,
> llvm.dbg.declare survives optimization, which causes us to emit indirect
> DBG_VALUE instructions. The fast register allocator knows to insert
> DW_OP_deref when spilling indirect DBG_VALUE instructions, but the
> LiveDebugVariables did not until this change.
>
> This fixes part of PR34513. I need to look into why this doesn't work at
> -O0 and I'll send follow up patches to handle that.
>
> Reviewers: aprantl, dblaikie, probinson
>
> Subscribers: qcolombet, hiraditya, llvm-commits
>
> Differential Revision: https://reviews.llvm.org/D37911
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313589 91177308-0d34-0410-b5e6-96231b3b80d8
This patch makes the `.eh_frame` extension an alias for `.debug_frame`.
Up till now it was only possible to dump the section using objdump, but
not with dwarfdump. Since the two are essentially interchangeable, we
dump whichever of the two is present.
As a workaround, this patch also adds parsing for 3 currently
unimplemented CFA instructions: `DW_CFA_def_cfa_expression`,
`DW_CFA_expression`, and `DW_CFA_val_expression`. Because I lack the
required knowledge, I just parse the fields without actually creating
the instructions.
Finally, this also fixes the typo in the `.debug_frame` section name
which incorrectly contained a trailing `s`.
Differential revision: https://reviews.llvm.org/D37852
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313530 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 6389e7aa724ea7671d096f4770f016c3d86b0d54.
There is a bug in this implementation where the string value of the
checksum is outputted, instead of the actual hex bytes. Therefore the
checksum is incorrect, and this prevent pdbs from being loaded by visual
studio. Revert this until the checksum is emitted correctly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313431 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This comes up in optimized debug info for C++ programs that pass and
return objects indirectly by address. In these programs,
llvm.dbg.declare survives optimization, which causes us to emit indirect
DBG_VALUE instructions. The fast register allocator knows to insert
DW_OP_deref when spilling indirect DBG_VALUE instructions, but the
LiveDebugVariables did not until this change.
This fixes part of PR34513. I need to look into why this doesn't work at
-O0 and I'll send follow up patches to handle that.
Reviewers: aprantl, dblaikie, probinson
Subscribers: qcolombet, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37911
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313400 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Fixes PR34513.
Indirect DBG_VALUEs typically come from dbg.declares of non-trivially
copyable C++ objects that must be passed by address. We were already
handling the case where the virtual register gets allocated to a
physical register and is later spilled. That's what usually happens for
normal parameters that aren't NRVO variables: they usually appear in
physical register parameters, and are spilled later in the function,
which would correctly add deref.
NRVO variables are different because the dbg.declare can come much later
after earlier instructions cause the incoming virtual register to be
spilled.
Also, clean up this code. We only need to look at the first operand of a
DBG_VALUE, which eliminates the operand loop.
Reviewers: aprantl, dblaikie, probinson
Subscribers: MatzeB, qcolombet, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D37929
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313399 91177308-0d34-0410-b5e6-96231b3b80d8
