We have known UB in some ilists where we static cast half nodes to
(larger) derived types and use the address. See llvm.org/PR26753.
This needs to be fixed, but in the meantime it'd be nice if running
ubsan didn't complain. This adds annotations in the two places where
ubsan complains while running check-all of a sanitized clang build.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262683 91177308-0d34-0410-b5e6-96231b3b80d8
This patch provides the following infrastructure for PGO enhancements in inliner:
Enable the use of block level profile information in inliner
Incremental update of block frequency information during inlining
Update the function entry counts of callees when they get inlined into callers.
Differential Revision: http://reviews.llvm.org/D16381
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262636 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: SampleProfile pass needs to be performed after InstructionCombiningPass, which helps eliminate un-inlinable function calls.
Reviewers: davidxl, dnovillo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17742
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262419 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This adds the beginning of an update API to preserve MemorySSA. In particular,
this patch adds a way to remove memory SSA accesses when instructions are
deleted.
It also adds relevant unit testing infrastructure for MemorySSA's API.
(There is an actual user of this API, i will make that diff dependent on this one. In practice, a ton of opt passes remove memory instructions, so it's hopefully an obviously useful API :P)
Reviewers: hfinkel, reames, george.burgess.iv
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17157
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262362 91177308-0d34-0410-b5e6-96231b3b80d8
analyses in the new pass manager.
These just handle really basic stuff: turning a type name into a string
statically that is nice to print in logs, and getting a static unique ID
for each analysis.
Sadly, the format of passes in anonymous namespaces makes using their
names in tests really annoying so I've customized the names of the no-op
passes to keep tests sane to read.
This is the first of a few simplifying refactorings for the new pass
manager that should reduce boilerplate and confusion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262004 91177308-0d34-0410-b5e6-96231b3b80d8
This patch enables the vectorization of first-order recurrences. A first-order
recurrence is a non-reduction recurrence relation in which the value of the
recurrence in the current loop iteration equals a value defined in the previous
iteration. The load PRE of the GVN pass often creates these recurrences by
hoisting loads from within loops.
In this patch, we add a new recurrence kind for first-order phi nodes and
attempt to vectorize them if possible. Vectorization is performed by shuffling
the values for the current and previous iterations. The vectorization cost
estimate is updated to account for the added shuffle instruction.
Contributed-by: Matthew Simpson and Chad Rosier <mcrosier@codeaurora.org>
Differential Revision: http://reviews.llvm.org/D16197
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261346 91177308-0d34-0410-b5e6-96231b3b80d8
routine.
We were getting this wrong in small ways and generally being very
inconsistent about it across loop passes. Instead, let's have a common
place where we do this. One minor downside is that this will require
some analyses like SCEV in more places than they are strictly needed.
However, this seems benign as these analyses are complete no-ops, and
without this consistency we can in many cases end up with the legacy
pass manager scheduling deciding to split up a loop pass pipeline in
order to run the function analysis half-way through. It is very, very
annoying to fix these without just being very pedantic across the board.
The only loop passes I've not updated here are ones that use
AU.setPreservesAll() such as IVUsers (an analysis) and the pass printer.
They seemed less relevant.
With this patch, almost all of the problems in PR24804 around loop pass
pipelines are fixed. The one remaining issue is that we run simplify-cfg
and instcombine in the middle of the loop pass pipeline. We've recently
added some loop variants of these passes that would seem substantially
cleaner to use, but this at least gets us much closer to the previous
state. Notably, the seven loop pass managers is down to three.
I've not updated the loop passes using LoopAccessAnalysis because that
analysis hasn't been fully wired into LoopSimplify/LCSSA, and it isn't
clear that those transforms want to support those forms anyways. They
all run late anyways, so this is harmless. Similarly, LSR is left alone
because it already carefully manages its forms and doesn't need to get
fused into a single loop pass manager with a bunch of other loop passes.
LoopReroll didn't use loop simplified form previously, and I've updated
the test case to match the trivially different output.
Finally, I've also factored all the pass initialization for the passes
that use this technique as well, so that should be done regularly and
reliably.
Thanks to James for the help reviewing and thinking about this stuff,
and Ben for help thinking about it as well!
Differential Revision: http://reviews.llvm.org/D17435
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261316 91177308-0d34-0410-b5e6-96231b3b80d8
convert one test to use this.
This is a particularly significant milestone because it required
a working per-function AA framework which can be queried over each
function from within a CGSCC transform pass (and additionally a module
analysis to be accessible). This is essentially *the* point of the
entire pass manager rewrite. A CGSCC transform is able to query for
multiple different function's analysis results. It works. The whole
thing appears to actually work and accomplish the original goal. While
we were able to hack function attrs and basic-aa to "work" in the old
pass manager, this port doesn't use any of that, it directly leverages
the new fundamental functionality.
For this to work, the CGSCC framework also has to support SCC-based
behavior analysis, etc. The only part of the CGSCC pass infrastructure
not sorted out at this point are the updates in the face of inlining and
running function passes that mutate the call graph.
The changes are pretty boring and boiler-plate. Most of the work was
factored into more focused preperatory patches. But this is what wires
it all together.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261203 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
On the contrary to Full LTO, ThinLTO can afford to shift compile time
from the frontend to the linker: both phases are parallel (even if
it is not totally "free": projects like clang are reusing product
from the "compile phase" for multiple link, think about
libLLVMSupport reused for opt, llc, etc.).
This pipeline is based on the proposal in D13443 for full LTO. We
didn't move forward on this proposal because the LTO link was far too
long after that. We believe that we can afford it with ThinLTO.
The ThinLTO pipeline integrates in the regular O2/O3 flow:
- The compile phase perform the inliner with a somehow lighter
function simplification. (TODO: tune the inliner thresholds here)
This is intendend to simplify the IR and get rid of obvious things
like linkonce_odr that will be inlined.
- The link phase will run the pipeline from the start, extended with
some specific passes that leverage the augmented knowledge we have
during LTO. Especially after the inliner is done, a sequence of
globalDCE/globalOpt is performed, followed by another run of the
"function simplification" passes. It is not clear if this part
of the pipeline will stay as is, as the split model of ThinLTO
does not allow the same benefit as FullLTO without added tricks.
The measurements on the public test suite as well as on our internal
suite show an overall net improvement. The binary size for the clang
executable is reduced by 5%. We're still tuning it with the bringup
of ThinLTO and it will evolve, but this should provide a good starting
point.
Reviewers: tejohnson
Differential Revision: http://reviews.llvm.org/D17115
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261029 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Export the CloneDebugInfoMetadata utility, which clones all debug info
associated with a function into the first module. Also use this function
in CloneModule on each function we clone (the CloneFunction entrypoint
already does this).
Without this, cloning a module will lead to DI quality regressions,
especially since r252219 reversed the Function <-> DISubprogram edge
(before we could get lucky and have this edge preserved if the
DISubprogram itself was, e.g. due to location metadata).
This was verified to fix missing debug information in julia and
a unittest to verify the new behavior is included.
Patch by Yichao Yu! Thanks!
Reviewers: loladiro, pcc
Differential Revision: http://reviews.llvm.org/D17165
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260791 91177308-0d34-0410-b5e6-96231b3b80d8
MSan adds a constructor to each translation unit that calls
__msan_init, and does nothing else. The idea is to run __msan_init
before any instrumented code. This results in multiple constructors
and multiple .init_array entries in the final binary, one per
translation unit. This is absolutely unnecessary; one would be
enough.
This change moves the constructors to a comdat group in order to drop
the extra ones.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260632 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
On the contrary to Full LTO, ThinLTO can afford to shift compile time
from the frontend to the linker: both phases are parallel.
This pipeline is based on the proposal in D13443 for full LTO. We ]
didn't move forward on this proposal because the link was far too long
after that.
This patch refactor the "function simplification" passes that are part
of the inliner loop in a helper function (this part is NFC and can be
commited separately to simplify the diff). The ThinLTO pipeline
integrates in the regular O2/O3 flow:
- The compile phase perform the inliner with a somehow lighter
function simplification. (TODO: tune the inliner thresholds here)
This is intendend to simplify the IR and get rid of obvious things
like linkonce_odr that will be inlined.
- The link phase will run the pipeline from the start, extended with
some specific passes that leverage the augmented knowledge we have
during LTO. Especially after the inliner is done, a sequence of
globalDCE/globalOpt is performed, followed by another run of the
"function simplification" passes.
The measurements on the public test suite as well as on our internal
suite show an overall net improvement. The binary size for the clang
executable is reduced by 5%. We're still tuning it with the bringup
of ThinLTO but this should provide a good starting point.
Reviewers: tejohnson
Subscribers: joker.eph, llvm-commits, dexonsmith
Differential Revision: http://reviews.llvm.org/D17115
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260604 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
As discussed on IRC, move the ThinLTOGlobalProcessing code out of
the linker, and into TransformUtils. The name of the class is changed
to FunctionImportGlobalProcessing.
Reviewers: joker.eph, rafael
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D17081
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260395 91177308-0d34-0410-b5e6-96231b3b80d8
This pass implements whole program optimization of virtual calls in cases
where we know (via bitset information) that the list of callees is fixed. This
includes the following:
- Single implementation devirtualization: if a virtual call has a single
possible callee, replace all calls with a direct call to that callee.
- Virtual constant propagation: if the virtual function's return type is an
integer <=64 bits and all possible callees are readnone, for each class and
each list of constant arguments: evaluate the function, store the return
value alongside the virtual table, and rewrite each virtual call as a load
from the virtual table.
- Uniform return value optimization: if the conditions for virtual constant
propagation hold and each function returns the same constant value, replace
each virtual call with that constant.
- Unique return value optimization for i1 return values: if the conditions
for virtual constant propagation hold and a single vtable's function
returns 0, or a single vtable's function returns 1, replace each virtual
call with a comparison of the vptr against that vtable's address.
Differential Revision: http://reviews.llvm.org/D16795
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260312 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When alias analysis is uncertain about the aliasing between any two accesses,
it will return MayAlias. This uncertainty from alias analysis restricts LICM
from proceeding further. In cases where alias analysis is uncertain we might
use loop versioning as an alternative.
Loop Versioning will create a version of the loop with aggressive aliasing
assumptions in addition to the original with conservative (default) aliasing
assumptions. The version of the loop making aggressive aliasing assumptions
will have all the memory accesses marked as no-alias. These two versions of
loop will be preceded by a memory runtime check. This runtime check consists
of bound checks for all unique memory accessed in loop, and it ensures the
lack of memory aliasing. The result of the runtime check determines which of
the loop versions is executed: If the runtime check detects any memory
aliasing, then the original loop is executed. Otherwise, the version with
aggressive aliasing assumptions is used.
The pass is off by default and can be enabled with command line option
-enable-loop-versioning-licm.
Reviewers: hfinkel, anemet, chatur01, reames
Subscribers: MatzeB, grosser, joker.eph, sanjoy, javed.absar, sbaranga,
llvm-commits
Differential Revision: http://reviews.llvm.org/D9151
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259986 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
LoopVersioning is a transform utility that transform passes can use to
run-time disambiguate may-aliasing accesses. I'd like to also expose as
pass to allow it to be unit-tested.
I am planning to add support for non-aliasing annotation in
LoopVersioning and I'd like to be able to write tests directly using
this pass.
(After that feature is done, the pass could also be used to look for
optimization opportunities that are hidden behind incomplete alias
information at compile time.)
The pass drives LoopVersioning in its default way which is to fully
disambiguate may-aliasing accesses no matter how many checks are
required.
Reviewers: hfinkel, ashutosh.nema, sbaranga
Subscribers: zzheng, mssimpso, llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D16612
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259610 91177308-0d34-0410-b5e6-96231b3b80d8
Loop transformations can sometimes fail because the loop, while in
valid rotated LCSSA form, is not in a canonical CFG form. This is
an extremely simple pass that just merges obviously redundant
blocks, which can be used to fix some known failure cases. In the
future, it may be enhanced with more cases (and have code shared with
SimplifyCFG).
This allows us to run LoopSimplifyCFG -> LoopRotate -> LoopUnroll,
so that SimplifyCFG cleans up the loop before Rotate tries to run.
Not currently used in the pass manager, since this pass doesn't do
anything unless you can hook it up in an LPM with other loop passes.
It'll be added once Chandler cleans up things to allow this.
Tested in a custom pipeline out of tree to confirm it works in
practice (in addition to the included trivial test).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259256 91177308-0d34-0410-b5e6-96231b3b80d8
SCCP has code identical to changeToUnreachable's behavior, switch it
over to just call changeToUnreachable.
No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258654 91177308-0d34-0410-b5e6-96231b3b80d8
InstCombine and SCCP both want to remove dead code in a very particular
way but using identical means to do so. Share the code between the two.
No functionality change is intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258653 91177308-0d34-0410-b5e6-96231b3b80d8
Include the needed headfile to fix the buildbot failure due to r258420 [PGO] Passmanagerbuilder change that enable IR level PGO instrumentation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258423 91177308-0d34-0410-b5e6-96231b3b80d8
This patch includes the passmanagerbuilder change that enables IR level PGO instrumentation. It adds two passmanagerbuilder options: -profile-generate=<profile_filename> and -profile-use=<profile_filename>. The new options are primarily for debug purpose.
Reviewers: davidxl, silvas
Differential Revision: http://reviews.llvm.org/D15828
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258420 91177308-0d34-0410-b5e6-96231b3b80d8
Note: There are no uses of these functions outside of
SimplifyLibCalls, so they could be static functions in
that file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258172 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Currently llvm::SplitModule as the first step globalizes all local objects, which might not be desirable in some scenarios.
This change adds a new flag to llvm::SplitModule that uses SCC approach to search for a balanced partition without the need to externalize symbols.
Such partition might not be possible or fully balanced for a given number of partitions, and is a function of the module properties (global/local dependencies within the module).
Joint development Tobias Edler von Koch (tobias@codeaurora.org) and Sergei Larin (slarin@codeaurora.org)
Subscribers: llvm-commits, joker.eph
Differential Revision: http://reviews.llvm.org/D16124
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258083 91177308-0d34-0410-b5e6-96231b3b80d8
There are several requirements that ended up with this design;
1. Matching bitreversals is too heavyweight for InstCombine and doesn't really need to be done so early.
2. Bitreversals and byteswaps are very related in their matching logic.
3. We want to implement support for matching more advanced bswap/bitreverse patterns like partial bswaps/bitreverses.
4. Bswaps are best matched early in InstCombine.
The result of these is that a new utility function is created in Transforms/Utils/Local.h that can be configured to search for bswaps, bitreverses or both. InstCombine uses it to find only bswaps, CGP uses it to find only bitreversals.
We can then extend the matching logic in one place only.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@257875 91177308-0d34-0410-b5e6-96231b3b80d8
