A virtual index of -1u indicates that the subprogram's virtual index is
unrepresentable (for example, when using the relative vtable ABI), so do
not emit a DW_AT_vtable_elem_location attribute for it.
Differential Revision: http://reviews.llvm.org/D18236
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263765 91177308-0d34-0410-b5e6-96231b3b80d8
This way we have a single entry point into StatepointLowering. The
method was a direct dispatch to LowerStatepoint anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263682 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is a step towards implementing "direct" lowering of calls and
invokes with deopt operand bundles into STATEPOINT nodes (as opposed to
having them mandatorily pass through RewriteStatepointsForGC, which is
the case today).
This change extracts out a `SelectionDAGBuilder::LowerAsStatepoint`
helper function that is able to lower a "statepoint like thing", and
uses it to lower `gc.statepoint` calls. This is an NFC now, but in a
later change we will use `LowerAsStatepoint` to directly lower calls and
invokes with operand bundles without going through an intermediate
`gc.statepoint` IR representation.
FYI: I expect `SelectionDAGBuilder::StatepointInfo` will evolve as I add
support for lowering non gc.statepoints, right now it is fairly tightly
coupled with an IR level `gc.statepoint`.
Reviewers: reames, pgavlin, JosephTremoulet
Subscribers: sanjoy, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D18106
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263671 91177308-0d34-0410-b5e6-96231b3b80d8
- Rename getATOMIC to getSYNC, as llvm will soon be able to emit both
'__sync' libcalls and '__atomic' libcalls, and this function is for
the '__sync' ones.
- getInsertFencesForAtomic() has been replaced with
shouldInsertFencesForAtomic(Instruction), so that the decision can be
made per-instruction. This functionality will be used soon.
- emitLeadingFence/emitTrailingFence are no longer called if
shouldInsertFencesForAtomic returns false, and thus don't need to
check the condition themselves.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263665 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAGBuilder::populateCallLoweringInfo is now used instead of
SelectionDAGBuilder::lowerCallOperands. The populateCallLoweringInfo
interface is more composable in face of design changes like
http://reviews.llvm.org/D18106
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263663 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for the MachO .alt_entry assembly directive, and uses
it for global aliases with non-zero GEP offsets. The alt_entry flag indicates
that a symbol should be layed out immediately after the preceding symbol.
Conceptually it introduces an alternate entry point for a function or data
structure. E.g.:
safe_foo:
// check preconditions for foo
.alt_entry fast_foo
fast_foo:
// body of foo, can assume preconditions.
The .alt_entry flag is also implicitly set on assembly aliases of the form:
a = b + C
where C is a non-zero constant, since these have the same effect as an
alt_entry symbol: they introduce a label that cannot be moved relative to the
preceding one. Setting the alt_entry flag on aliases of this form fixes
http://llvm.org/PR25381.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263521 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of running an explicit loop over `gc.relocate` calls hanging off
of a `gc.statepoint`, assert the validity of the type of the value being
relocated in `visitRelocate`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263516 91177308-0d34-0410-b5e6-96231b3b80d8
pre-SSE41 hardware" as it seems to be causing crashes during code
generation in halide. PR forthcoming.
This reverts commit r263303.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263512 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: There are places in MachineBlockPlacement where a worklist is filled in pretty much identical way. The code is duplicated. This refactor it so that the same code is used in both scenarii.
Reviewers: chandlerc, majnemer, rafael, MatzeB, escha, silvas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D18077
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263495 91177308-0d34-0410-b5e6-96231b3b80d8
The bad behavior happens when we have a function with a long linear chain of
basic blocks, and have a live range spanning most of this chain, but with very
few uses.
Let say we have only 2 uses.
The Hopfield network is only seeded with two active blocks where the uses are,
and each iteration of the outer loop in `RAGreedy::growRegion()` only adds two
new nodes to the network due to the completely linear shape of the CFG.
Meanwhile, `SpillPlacer->iterate()` visits the whole set of discovered nodes,
which adds up to a quadratic algorithm.
This is an historical accident effect from r129188.
When the Hopfield network is expanding, most of the action is happening on the
frontier where new nodes are being added. The internal nodes in the network are
not likely to be flip-flopping much, or they will at least settle down very
quickly. This means that while `SpillPlacer->iterate()` is recomputing all the
nodes in the network, it is probably only the two frontier nodes that are
changing their output.
Instead of recomputing the whole network on each iteration, we can maintain a
SparseSet of nodes that need to be updated:
- `SpillPlacement::activate()` adds the node to the todo list.
- When a node changes value (i.e., `update()` returns true), its neighbors are
added to the todo list.
- `SpillPlacement::iterate()` only updates the nodes in the list.
The result of Hopfield iterations is not necessarily exact. It should converge
to a local minimum, but there is no guarantee that it will find a global
minimum. It is possible that updating nodes in a different order will cause us
to switch to a different local minimum. In other words, this is not NFC, but
although I saw a few runtime improvements and regressions when I benchmarked
this change, those were side effects and actually the performance change is in
the noise as expected.
Huge thanks to Jakob Stoklund Olesen <stoklund@2pi.dk> for his feedbacks,
guidance and time for the review.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263460 91177308-0d34-0410-b5e6-96231b3b80d8
Fundamentally, the length of a variable or function name is bound by the
maximum size of a record: 0xffff. However, the name doesn't live in a
vacuum; other data is associated with the name, lowering the bound
further.
We would naively attempt to emit the name, causing us to assert because
the record would no-longer fit in 16-bits. Instead, truncate the name
but preserve as much as we can.
While I have tested this locally, I've decided to not commit it due to
the test's size.
N.B. While this behavior is undesirable, it is better than MSVC's
behavior. They seem to truncate to ~4000 characters.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263378 91177308-0d34-0410-b5e6-96231b3b80d8
Improve vector extension of vectors on hardware without dedicated VSEXT/VZEXT instructions.
We already convert these to SIGN_EXTEND_VECTOR_INREG/ZERO_EXTEND_VECTOR_INREG but can further improve this by using the legalizer instead of prematurely splitting into legal vectors in the combine as this only properly helps for lowering to VSEXT/VZEXT.
Removes a lot of unnecessary any_extend + mask pattern - (Fix for PR25718).
Differential Revision: http://reviews.llvm.org/D17932
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263303 91177308-0d34-0410-b5e6-96231b3b80d8
The truncation was causing the sorting algorithm to behave oddly when comparing
positive and negative offsets. Fortunately, this doesn't currently happen in
practice and was exposed by a WIP. Thus, I can't test this change now, but the
follow on patch will.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263255 91177308-0d34-0410-b5e6-96231b3b80d8
llvm::getDISubprogram walks the instructions in a function, looking for one in the scope of the current function, so that it can find the !dbg entry for the subprogram itself.
Now that !dbg is attached to functions, this should not be necessary. This patch changes all uses to just query the subprogram directly on the function.
Ideally this should be NFC, but in reality its possible that a function:
has no !dbg (in which case there's likely a bug somewhere in an opt pass), or
that none of the instructions had a scope referencing the function, so we used to not find the !dbg on the function but now we will
Reviewed by Duncan Exon Smith.
Differential Revision: http://reviews.llvm.org/D18074
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263184 91177308-0d34-0410-b5e6-96231b3b80d8
Generalise the existing SIGN_EXTEND to SIGN_EXTEND_VECTOR_INREG combine to support zero extension as well and get rid of a lot of unnecessary ANY_EXTEND + mask patterns.
Reapplied with a fix for PR26870 (avoid premature use of TargetConstant in ZERO_EXTEND_VECTOR_INREG expansion).
Differential Revision: http://reviews.llvm.org/D17691
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263159 91177308-0d34-0410-b5e6-96231b3b80d8
This is a fairly straightforward port to the new pass manager with one
exception. It removes a very questionable use of releaseMemory() in
the old pass to invalidate its caches between runs on a function.
I don't think this is really guaranteed to be safe. I've just used the
more direct port to the new PM to address this by nuking the results
object each time the pass runs. While this could cause some minor malloc
traffic increase, I don't expect the compile time performance hit to be
noticable, and it makes the correctness and other aspects of the pass
much easier to reason about. In some cases, it may make things faster by
making the sets and maps smaller with better locality. Indeed, the
measurements collected by Bruno (thanks!!!) show mostly compile time
improvements.
There is sadly very limited testing at this point as there are only two
tests of memdep, and both rely on GVN. I'll be porting GVN next and that
will exercise this heavily though.
Differential Revision: http://reviews.llvm.org/D17962
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263082 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches CGP to duplicate addressing mode computations into cold paths (detected via explicit cold attribute on calls) if required to let addressing mode be safely sunk into the basic block containing each load and store.
In general, duplicating code into cold blocks may result in code growth, but should not effect performance. In this case, it's better to duplicate some code than to put extra pressure on the register allocator by making it keep the address through the entirely of the fast path.
This patch only handles addressing computations, but in principal, we could implement a more general cold cold scheduling heuristic which tries to reduce register pressure in the fast path by duplicating code into the cold path. Getting the profitability of the general case right seemed likely to be challenging, so I stuck to the existing case (addressing computation) we already had.
Differential Revision: http://reviews.llvm.org/D17652
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263074 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The code in SelectionDAG did not handle the case where the
register type and output types were different, but had the same size.
Reviewers: arsenm, echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17940
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@263022 91177308-0d34-0410-b5e6-96231b3b80d8
This re-applies r262886 with a fix for 32 bit platforms that have 8 byte
pointer alignment, effectively reverting r262892.
Original Message:
Currently some SDNode operands are malloc'd, some are stored inline in
subclasses of SDNode, and some are thrown into a BumpPtrAllocator.
This scheme is complex, inconsistent, and makes refactoring SDNodes
fairly difficult.
Instead, we can allocate all of the operands using an ArrayRecycler
that wraps a BumpPtrAllocator. This keeps the cache locality when
iterating operands, improves locality when iterating SDNodes without
looking at operands, and vastly simplifies the ownership semantics.
It also means we stop overallocating SDNodes by 2-3x and will make it
simpler to fix the rampant undefined behaviour we have in how we
mutate SDNodes from one kind to another (See llvm.org/pr26808).
This is NFC other than the changes in memory behaviour, and I ran some
LNT tests to make sure this didn't hurt compile time. Not many tests
changed: there were a couple of 1-2% regressions reported, but there
were more improvements (of up to 4%) than regressions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262902 91177308-0d34-0410-b5e6-96231b3b80d8
Looks like the largest SDNode is different between 32 and 64 bit now,
so this is breaking 32 bit bots. Reverting while I figure out a fix.
This reverts r262886.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262892 91177308-0d34-0410-b5e6-96231b3b80d8
Currently some SDNode operands are malloc'd, some are stored inline in
subclasses of SDNode, and some are thrown into a BumpPtrAllocator.
This scheme is complex, inconsistent, and makes refactoring SDNodes
fairly difficult.
Instead, we can allocate all of the operands using an ArrayRecycler
that wraps a BumpPtrAllocator. This keeps the cache locality when
iterating operands, improves locality when iterating SDNodes without
looking at operands, and vastly simplifies the ownership semantics.
It also means we stop overallocating SDNodes by 2-3x and will make it
simpler to fix the rampant undefined behaviour we have in how we
mutate SDNodes from one kind to another (See llvm.org/pr26808).
This is NFC other than the changes in memory behaviour, and I ran some
LNT tests to make sure this didn't hurt compile time. Not many tests
changed: there were a couple of 1-2% regressions reported, but there
were more improvements (of up to 4%) than regressions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262886 91177308-0d34-0410-b5e6-96231b3b80d8
Before this change, we would get the type definition in the middle
of the instruction.
E.g., %0(48) = G_ADD %struct_alias = type { i32, i16 } %edi, %edi
Now, we have just the expected type name:
%0(48) = G_ADD %struct_alias %edi, %edi
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262885 91177308-0d34-0410-b5e6-96231b3b80d8
