This patch series adds support for the next-generation arch13
CPU architecture to the SystemZ backend.
This includes:
- Basic support for the new processor and its features.
- Assembler/disassembler support for new instructions.
- CodeGen for new instructions, including new LLVM intrinsics.
- Scheduler description for the new processor.
- Detection of arch13 as host processor.
Note: No currently available Z system supports the arch13
architecture. Once new systems become available, the
official system name will be added as supported -march name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@365932 91177308-0d34-0410-b5e6-96231b3b80d8
Although removeCopyByCommutingDef deals with full copies, it is still
possible to copy undef lanes and thus, we wouldn't have any a value
number for these lanes.
This fixes PR40215.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@365256 91177308-0d34-0410-b5e6-96231b3b80d8
This implements a small enhancement to https://reviews.llvm.org/D55506
Specifically, while we were able to match strict FP nodes for
floating-point extend operations with a register as source, this
did not work for operations with memory as source.
That is because from regular operations, this is represented as
a combined "extload" node (which is a variant of a load SD node);
but there is no equivalent using a strict FP operation.
However, it turns out that even in the absence of an extload
node, we can still just match the operations explicitly, e.g.
(strict_fpextend (f32 (load node:$ptr))
This patch implements that method to match the LDEB/LXEB/LXDB
SystemZ instructions even when the extend uses a strict-FP node.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@364450 91177308-0d34-0410-b5e6-96231b3b80d8
Vector load/store instructions support an optional alignment field
that the compiler can use to provide known alignment info to the
hardware. If the field is used (and the information is correct),
the hardware may be able (on some models) to perform faster memory
accesses than otherwise.
This patch adds support for alignment hints in the assembler and
disassembler, and fills in known alignment during codegen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363806 91177308-0d34-0410-b5e6-96231b3b80d8
This allows targets to make more decisions about reserved registers
after isel. For example, now it should be certain there are calls or
stack objects in the frame or not, which could have been introduced by
legalization.
Patch by Matthias Braun
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363757 91177308-0d34-0410-b5e6-96231b3b80d8
Some GEPs were not being split, presumably because that split would just be
undone by the DAGCombiner. Not performing those splits can prevent important
optimizations, such as preventing the element indices / member offsets from
being (partially) folded into load/store instruction immediates. This patch:
- Makes the splits also occur in the cases where the base address and the GEP
are in the same BB.
- Ensures that the DAGCombiner doesn't reassociate them back again.
Differential Revision: https://reviews.llvm.org/D60294
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363544 91177308-0d34-0410-b5e6-96231b3b80d8
This patch changes MIR stack-id from an integer to an enum,
and adds printing/parsing support for this in MIR files. The default
stack-id '0' is now renamed to 'default'.
This should make MIR tests that have stack objects with different stack-ids
more descriptive. It also clarifies code operating on StackID.
Reviewers: arsenm, thegameg, qcolombet
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D60137
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363533 91177308-0d34-0410-b5e6-96231b3b80d8
Current findBestLoopTop can find and move one kind of block to top, a latch block has one successor. Another common case is:
* a latch block
* it has two successors, one is loop header, another is exit
* it has more than one predecessors
If it is below one of its predecessors P, only P can fall through to it, all other predecessors need a jump to it, and another conditional jump to loop header. If it is moved before loop header, all its predecessors jump to it, then fall through to loop header. So all its predecessors except P can reduce one taken branch.
Differential Revision: https://reviews.llvm.org/D43256
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@363471 91177308-0d34-0410-b5e6-96231b3b80d8
This behavior was added in r130928 for both FastISel and SD, and then
disabled in r131156 for FastISel.
This re-enables it for FastISel with the corresponding fix.
This is triggered only when FastISel can't lower the arguments and falls
back to SelectionDAG for it.
FastISel contains a map of "register fixups" where at the end of the
selection phase it replaces all uses of a register with another
register that FastISel sometimes pre-assigned. Code at the end of
SelectionDAGISel::runOnMachineFunction is doing the replacement at the
very end of the function, while other pieces that come in before that
look through the MachineFunction and assume everything is done. In this
case, the real issue is that the code emitting COPY instructions for the
liveins (physreg to vreg) (EmitLiveInCopies) is checking if the vreg
assigned to the physreg is used, and if it's not, it will skip the COPY.
If a register wasn't replaced with its assigned fixup yet, the copy will
be skipped and we'll end up with uses of undefined registers.
This fix moves the replacement of registers before the emission of
copies for the live-ins.
The initial motivation for this fix is to enable tail calls for
swiftself functions, which were blocked because we couldn't prove that
the swiftself argument (which is callee-save) comes from a function
argument (live-in), because there was an extra copy (vreg to vreg).
A few tests are affected by this:
* llvm/test/CodeGen/AArch64/swifterror.ll: we used to spill x21
(callee-save) but never reload it because it's attached to the return.
We now don't even spill it anymore.
* llvm/test/CodeGen/*/swiftself.ll: we tail-call now.
* llvm/test/CodeGen/AMDGPU/mubuf-legalize-operands.ll: I believe this
test was not really testing the right thing, but it worked because the
same registers were re-used.
* llvm/test/CodeGen/ARM/cmpxchg-O0.ll: regalloc changes
* llvm/test/CodeGen/ARM/swifterror.ll: get rid of a copy
* llvm/test/CodeGen/Mips/*: get rid of spills and copies
* llvm/test/CodeGen/SystemZ/swift-return.ll: smaller stack
* llvm/test/CodeGen/X86/atomic-unordered.ll: smaller stack
* llvm/test/CodeGen/X86/swifterror.ll: same as AArch64
* llvm/test/DebugInfo/X86/dbg-declare-arg.ll: stack size changed
Differential Revision: https://reviews.llvm.org/D62361
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@362963 91177308-0d34-0410-b5e6-96231b3b80d8
This patch aims to reduce spilling and register moves by using the 3-address
versions of instructions per default instead of the 2-address equivalent
ones. It seems that both spilling and register moves are improved noticeably
generally.
Regalloc hints are passed to increase conversions to 2-address instructions
which are done in SystemZShortenInst.cpp (after regalloc).
Since the SystemZ reg/mem instructions are 2-address (dst and lhs regs are
the same), foldMemoryOperandImpl() can no longer trivially fold a spilled
source register since the reg/reg instruction is now 3-address. In order to
remedy this, new 3-address pseudo memory instructions are used to perform the
folding only when the dst and lhs virtual registers are known to be allocated
to the same physreg. In order to not let MachineCopyPropagation run and
change registers on these transformed instructions (making it 3-address), a
new target pass called SystemZPostRewrite.cpp is run just after
VirtRegRewriter, that immediately lowers the pseudo to a target instruction.
If it would have been possibe to insert a COPY instruction and change a
register operand (convert to 2-address) in foldMemoryOperandImpl() while
trusting that the caller (e.g. InlineSpiller) would update/repair the
involved LiveIntervals, the solution involving pseudo instructions would not
have been needed. This is perhaps a potential improvement (see Phabricator
post).
Common code changes:
* A new hook TargetPassConfig::addPostRewrite() is utilized to be able to run a
target pass immediately before MachineCopyPropagation.
* VirtRegMap is passed as an argument to foldMemoryOperand().
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D60888
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@362868 91177308-0d34-0410-b5e6-96231b3b80d8
The ISD::STRICT_ nodes used to implement the constrained floating-point
intrinsics are currently never passed to the target back-end, which makes
it impossible to handle them correctly (e.g. mark instructions are depending
on a floating-point status and control register, or mark instructions as
possibly trapping).
This patch allows the target to use setOperationAction to switch the action
on ISD::STRICT_ nodes to Legal. If this is done, the SelectionDAG common code
will stop converting the STRICT nodes to regular floating-point nodes, but
instead pass the STRICT nodes to the target using normal SelectionDAG
matching rules.
To avoid having the back-end duplicate all the floating-point instruction
patterns to handle both strict and non-strict variants, we make the MI
codegen explicitly aware of the floating-point exceptions by introducing
two new concepts:
- A new MCID flag "mayRaiseFPException" that the target should set on any
instruction that possibly can raise FP exception according to the
architecture definition.
- A new MI flag FPExcept that CodeGen/SelectionDAG will set on any MI
instruction resulting from expansion of any constrained FP intrinsic.
Any MI instruction that is *both* marked as mayRaiseFPException *and*
FPExcept then needs to be considered as raising exceptions by MI-level
codegen (e.g. scheduling).
Setting those two new flags is straightforward. The mayRaiseFPException
flag is simply set via TableGen by marking all relevant instruction
patterns in the .td files.
The FPExcept flag is set in SDNodeFlags when creating the STRICT_ nodes
in the SelectionDAG, and gets inherited in the MachineSDNode nodes created
from it during instruction selection. The flag is then transfered to an
MIFlag when creating the MI from the MachineSDNode. This is handled just
like fast-math flags like no-nans are handled today.
This patch includes both common code changes required to implement the
new features, and the SystemZ implementation.
Reviewed By: andrew.w.kaylor
Differential Revision: https://reviews.llvm.org/D55506
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@362663 91177308-0d34-0410-b5e6-96231b3b80d8
[FPEnv] Added a special UnrollVectorOp method to deal with the chain on StrictFP opcodes
This change creates UnrollVectorOp_StrictFP. The purpose of this is to address a failure that consistently occurs when calling StrictFP functions on vectors whose number of elements is 3 + 2n on most platforms, such as PowerPC or SystemZ. The old UnrollVectorOp method does not expect that the vector that it will unroll will have a chain, so it has an assert that prevents it from running if this is the case. This new StrictFP version of the method deals with the chain while unrolling the vector. With this new function in place during vector widending, llc can run vector-constrained-fp-intrinsics.ll for SystemZ successfully.
Submitted by: Drew Wock <drew.wock@sas.com>
Reviewed by: Cameron McInally, Kevin P. Neal
Approved by: Cameron McInally
Differential Revision: https://reviews.llvm.org/D62546
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@362241 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Direct sibling of D62223 patch.
While i don't have a direct motivational pattern for this,
it would seem to make sense to handle both patterns (or none),
for symmetry?
The aarch64 changes look neutral;
sparc and systemz look like improvement (one less instruction each);
x86 changes - 32bit case improves, 64bit case shows that LEA no longer
gets constructed, which may be because that whole test is `-mattr=+slow-lea,+slow-3ops-lea`
https://rise4fun.com/Alive/ffh
This is a recommit, originally committed in rL361852, but reverted
to investigate test-suite compile-time hangs, and then reverted in
rL362109 to fix missing constant folds that were causing
endless combine loops.
Reviewers: RKSimon, craig.topper, spatel, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, jyknight, javed.absar, kristof.beyls, fedor.sergeev, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62252
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@362143 91177308-0d34-0410-b5e6-96231b3b80d8
This change creates UnrollVectorOp_StrictFP. The purpose of this is to address a failure that consistently occurs when calling StrictFP functions on vectors whose number of elements is 3 + 2n on most platforms, such as PowerPC or SystemZ. The old UnrollVectorOp method does not expect that the vector that it will unroll will have a chain, so it has an assert that prevents it from running if this is the case. This new StrictFP version of the method deals with the chain while unrolling the vector. With this new function in place during vector widending, llc can run vector-constrained-fp-intrinsics.ll for SystemZ successfully.
Submitted by: Drew Wock <drew.wock@sas.com>
Reviewed by: Cameron McInally, Kevin P. Neal
Approved by: Cameron McInally
Differential Revision: http://reviews.llvm.org/D62546
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@362112 91177308-0d34-0410-b5e6-96231b3b80d8
I was looking into an endless combine loop the uncommitted follow-up patch
was causing, and it appears even these patches can exibit such an
endless loop. The root cause is that we try to hoist one binop (add/sub) with
constant operand, and if we get two such binops both of which are
eligible for this hoisting, we get stuck.
Some cases may highlight missing constant-folds.
Reverts r361871,r361872,r361873,r361874.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@362109 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Direct sibling of D62223 patch.
While i don't have a direct motivational pattern for this,
it would seem to make sense to handle both patterns (or none),
for symmetry?
The aarch64 changes look neutral;
sparc and systemz look like improvement (one less instruction each);
x86 changes - 32bit case improves, 64bit case shows that LEA no longer
gets constructed, which may be because that whole test is `-mattr=+slow-lea,+slow-3ops-lea`
https://rise4fun.com/Alive/ffh
This is a recommit, originally committed in rL361853, but reverted
to investigate test-suite compile-time hangs.
Reviewers: RKSimon, craig.topper, spatel, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, jyknight, javed.absar, kristof.beyls, fedor.sergeev, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62252
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@361872 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Direct sibling of D62223 patch.
While i don't have a direct motivational pattern for this,
it would seem to make sense to handle both patterns (or none),
for symmetry?
The aarch64 changes look neutral;
sparc and systemz look like improvement (one less instruction each);
x86 changes - 32bit case improves, 64bit case shows that LEA no longer
gets constructed, which may be because that whole test is `-mattr=+slow-lea,+slow-3ops-lea`
https://rise4fun.com/Alive/ffh
Reviewers: RKSimon, craig.topper, spatel, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, jyknight, javed.absar, kristof.beyls, fedor.sergeev, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62252
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@361853 91177308-0d34-0410-b5e6-96231b3b80d8
The check lines are being affected by an upcoming patch,
regenerate the checklines to visualize the changes better.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@361380 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the FPC (floating-point control register) as a reserved
physical register and models its use by SystemZ instructions.
Note that only the current rounding modes and the IEEE exception
masks are modeled. *Changes* of the FPC due to exceptions (in
particular the IEEE exception flags and the DXC) are not modeled.
At this point, this patch is mostly NFC, but it will prevent
scheduling of floating-point instructions across SPFC/LFPC etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@360570 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Extract the logic for doing reassociations
from DAGCombiner::reassociateOps into a helper
function DAGCombiner::reassociateOpsCommutative,
and use that helper to trigger reassociation
on the original operand order, or the commuted
operand order.
Codegen is not identical since the operand order will
be different when doing the reassociations for the
commuted case. That causes some unfortunate churn in
some test cases. Apart from that this should be NFC.
Reviewers: spatel, craig.topper, tstellar
Reviewed By: spatel
Subscribers: dmgreen, dschuff, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, hiraditya, aheejin, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61199
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@359476 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Targets like ARM, MSP430, PPC, and SystemZ have complex behavior when
printing the address of a MachineOperand::MO_GlobalAddress. Move that
handling into a new overriden method in each base class. A virtual
method was added to the base class for handling the generic case.
Refactors a few subclasses to support the target independent %a, %c, and
%n.
The patch also contains small cleanups for AVRAsmPrinter and
SystemZAsmPrinter.
It seems that NVPTXTargetLowering is possibly missing some logic to
transform GlobalAddressSDNodes for
TargetLowering::LowerAsmOperandForConstraint to handle with "i" extended
inline assembly asm constraints.
Fixes:
- https://bugs.llvm.org/show_bug.cgi?id=41402
- https://github.com/ClangBuiltLinux/linux/issues/449
Reviewers: echristo, void
Reviewed By: void
Subscribers: void, craig.topper, jholewinski, dschuff, jyknight, dylanmckay, sdardis, nemanjai, javed.absar, sbc100, jgravelle-google, eraman, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, jrtc27, atanasyan, jsji, llvm-commits, kees, tpimh, nathanchance, peter.smith, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60887
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@359337 91177308-0d34-0410-b5e6-96231b3b80d8
Certain optimisations from ConstantHoisting and CGP rely on Selection DAG not
seeing through to the constant in other blocks. Revert this patch while we come
up with a better way to handle that.
I will try to follow this up with some better tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358113 91177308-0d34-0410-b5e6-96231b3b80d8
This lines up with what we do for regular subtract and it matches up better with X86 assumptions in isel patterns that add with immediate is more canonical than sub with immediate.
Differential Revision: https://reviews.llvm.org/D60020
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@358027 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Teach SelectionDAG how to compute known bits of ISD::CopyFromReg if
the virtual reg used has one def only.
This can be particularly useful when calling isBaseWithConstantOffset()
with the ISD::CopyFromReg argument, as more optimizations may get enabled
in the result.
Also add a missing truncation on X86, found by testing of this patch.
Change-Id: Id1c9fceec862d118c54a5b53adf72ada5d6daefa
Reviewers: bogner, craig.topper, RKSimon
Reviewed By: RKSimon
Subscribers: lebedev.ri, nemanjai, jvesely, nhaehnle, javed.absar, jsji, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59535
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@357745 91177308-0d34-0410-b5e6-96231b3b80d8
This function is responsible for checking the legality of fusing an instance
of load -> op -> store into a single operation. In the SystemZ backend the
check was incomplete and a test case emerged with a cycle in the instruction
selection DAG as a result.
Instead of using the NodeIds to determine node relationships,
hasPredecessorHelper() now is used just like in the X86 backend. This handled
the failing tests and as well gave a few additional transformations on
benchmarks.
The SystemZ isFusableLoadOpStorePattern() is now a very near copy of the X86
function, and it seems this could be made a utility function in common code
instead.
Review: Ulrich Weigand
https://reviews.llvm.org/D60255
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@357688 91177308-0d34-0410-b5e6-96231b3b80d8
When performing an add-with-overflow with an immediate in the
range -2G ... -4G, code currently loads the immediate into a
register, which generally takes two instructions.
In this particular case, it is preferable to load the negated
immediate into a register instead, which always only requires
one instruction, and then perform a subtract.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@357597 91177308-0d34-0410-b5e6-96231b3b80d8
For shift and rotate instructions that only use the last 6 bits of the shift
amount, a shift amount of (x*64-s) can be substituted with (-s). This saves
one instruction and a register:
lhi %r1, 64
sr %r1, %r3
sllg %r2, %r2, 0(%r1)
=>
lcr %r1, %r3
sllg %r2, %r2, 0(%r1)
Review: Ulrich Weigand
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@357481 91177308-0d34-0410-b5e6-96231b3b80d8
getAsCarry() checks that the input argument is a carry-producing node before
allowing a transformation to addcarry. This patch adds a check to make sure
that the carry-producing node is legal. If it is not, it may not remain in a
form that is manageable by the target backend. The test case caused a
compilation failure during instruction selection for this reason on SystemZ.
Patch by Ulrich Weigand.
Review: Sanjay Patel
https://reviews.llvm.org/D59822
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@357052 91177308-0d34-0410-b5e6-96231b3b80d8
When splitting a subrange we end up with two different subranges covering
two different, non overlapping, lanes.
As part of this splitting the VNIs of the original live-range need
to be dispatched to the subranges according to which lanes they are
actually defining.
Prior to this patch we were assuming that all values were defining
all lanes. This was wrong as demonstrated by llvm.org/PR40835.
Differential Revision: https://reviews.llvm.org/D59731
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@357032 91177308-0d34-0410-b5e6-96231b3b80d8
The 2nd loop calculates spill costs but reports free registers as cost
0 anyway, so there is little benefit from having a separate early
loop.
Surprisingly this is not NFC, as many register are marked regDisabled
so the first loop often picks up later registers unnecessarily instead
of the first one available in the allocation order...
Patch by Matthias Braun
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356499 91177308-0d34-0410-b5e6-96231b3b80d8
This patch enables combining integer bitcasts of integer build vectors when the new scalar type is legal. I've avoided floating point because the implementation bitcasts float to int along the way and we would need to check the intermediate types for legality
Differential Revision: https://reviews.llvm.org/D58884
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@355324 91177308-0d34-0410-b5e6-96231b3b80d8
Since there is no "Load-and-Test-High" instruction, the 32 bit load of a
register to be compared with 0 can only be implemented with LT if the virtual
GRX32 register ends up in a low part (GR32 register).
This patch detects these cases and passes the GR32 registers (low parts) as
(soft) hints in getRegAllocationHints().
Review: Ulrich Weigand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@354935 91177308-0d34-0410-b5e6-96231b3b80d8
This patch aims to make sure that any such constant that can be generated
with a vector instruction (for example VGBM) is recognized as such during
legalization and kept as a target independent node through post-legalize
DAGCombining.
Two new functions named isVectorConstantLegal() and loadVectorConstant()
replace old ways of handling vector/FP constants.
A new struct named SystemZVectorConstantInfo is used to cache the results of
isVectorConstantLegal() and pass them onto loadVectorConstant().
Support for fp128 constants in the presence of FeatureVectorEnhancements1
(z14) has been added.
Review: Ulrich Weigand
https://reviews.llvm.org/D58270
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@354896 91177308-0d34-0410-b5e6-96231b3b80d8
It seems there were some problem with using a .mir test. For some reason
doing '-stop-before=codegenprepare' and then '-start-before=codegenprepare'
on the output .mir file results in the NoVRegs Property after instruction
selection.
Recommitting the same test as an .ll file instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@354160 91177308-0d34-0410-b5e6-96231b3b80d8
