Summary:
Instead the system is required to provide some means of handling unaligned
load/store without special instructions. Options include full hardware
support, full trap-and-emulate, and hybrids such as hardware support within
a cache line and trap-and-emulate for multi-line accesses.
MipsSETargetLowering::allowsUnalignedMemoryAccesses() has been configured to
assume that unaligned accesses are 'fast' on the basis that I expect few
hardware implementations will opt for pure-software handling of unaligned
accesses. The ones that do handle it purely in software can override this.
mips64-load-store-left-right.ll has been merged into load-store-left-right.ll
The stricter testing revealed a Bits!=Bytes bug in passByValArg(). This has
been fixed and the variables renamed to clarify the units they hold.
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3872
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209512 91177308-0d34-0410-b5e6-96231b3b80d8
This allows existing DAG combines to work on them, and then
we can re-match to BFE if necessary during instruction selection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209462 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the x86 backend how to efficiently lower ISD::BITCAST dag
nodes from MVT::f64 to MVT::v4i16 (and vice versa), and from MVT::f64 to
MVT::v8i8 (and vice versa).
This patch extends the logic from revision 208107 to also handle MVT::v4i16
and MVT::v8i8. Also, this patch correctly propagates Undef values when
performing the widening of a vector (example: when widening from v2i32 to
v4i32, the upper 64bits of the resulting vector are 'undef').
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209451 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
* Split into two functions, one to test each struct.
* R0 and R2 must be defined by an lw with a %got reference to the correct
symbol.
* Test for $4 (first argument) where appropriate instead of accepting any
register.
* Test that the two lbu's are correctly combined into $4
Depends on D3844
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3845
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209424 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
lwl and lwr are not available in MIPS32r6/MIPS64r6. The purpose of the test
is to check that the '$1' expands to '0($x)' rather than to test something related
to the lwl or lwr instructions so we can simply switch to lw.
Depends on D3842
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3844
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209423 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch is necessary so that they do not fail on MIPS32r6/MIPS64r6 when
-integrated-as is enabled by default and we correctly detect the host CPU.
No functional change since these tests are testing the behaviour of the
constraint used for the third operand rather than the mnemonic.
Depends on D3842
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D3843
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209421 91177308-0d34-0410-b5e6-96231b3b80d8
This intrinsic permits the emission of platform specific undefined sequences.
ARM has reserved the 0xde opcode which takes a single integer parameter (ignored
by the CPU). This permits the operating system to implement custom behaviour on
this trap. The llvm.arm.undefined intrinsic is meant to provide a means for
generating the target specific behaviour from the frontend. This is
particularly useful for Windows on ARM which has made use of a series of these
special opcodes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209390 91177308-0d34-0410-b5e6-96231b3b80d8
Committed in r209178 then reverted in r209251 due to LTO breakage,
here's a proper fix for the case of the missing subprogram DIE. The DIEs
were there, just in other compile units. Using the SPMap we can find the
right compile unit to search for and produce cross-unit references to
describe this kind of inlining.
One existing test case needed to be updated because it had a function
that wasn't in the CU's subprogram list, so it didn't appear in the
SPMap.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209335 91177308-0d34-0410-b5e6-96231b3b80d8
ISD::VSELECT mask uses 1 to identify the first argument and 0 to identify the
second argument.
On the other hand, BLENDI uses 0 to identify the first argument and 1 to
identify the second argument.
Fix the generation of the blend mask to account for this difference.
The bug did not show up with r209043, because we were not checking for the
actual arguments of the blend instruction!
This commit also fixes the test cases.
Note: The same mask works for the BLENDr variant because the arguments are
swapped during instruction selection (see the BLENDXXrr patterns).
<rdar://problem/16975435>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209324 91177308-0d34-0410-b5e6-96231b3b80d8
Although the previous code would construct a bundle and add the correct elements
to it, it would not finalise the bundle. This resulted in the InternalRead
markers not being added to the MachineOperands nor, more importantly, the
externally visible defs to the bundle itself. So, although the bundle was not
exposing the def, the generated code would be correct because there was no
optimisations being performed. When optimisations were enabled, the post
register allocator would kick in, and the hazard recognizer would reorder
operations around the load which would define the value being operated upon.
Rather than manually constructing the bundle, simply construct and finalise the
bundle via the finaliseBundle call after both MIs have been emitted. This
improves the code generation with optimisations where IMAGE_REL_ARM_MOV32T
relocations are emitted.
The changes to the other tests are the result of the bundle generation
preventing the scheduler from hoisting the moves across the loads. The net
effect of the generated code is equivalent, but, is much more identical to what
is actually being lowered.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209267 91177308-0d34-0410-b5e6-96231b3b80d8
Povray and dealII currently assert with "Overran sorted position" in
AssignTopologicalOrder. The problem is that performPostLD1Combine can
introduce cycles.
Consider:
(insert_vector_elt (INSERT_SUBREG undef,
(load (add %vreg0, Constant<8>), undef), <= A
TargetConstant<2>),
(load %vreg0, undef), <= B
Constant<1>)
This is turned into a LD1LANEpost node. However the address in A is not a
valid user of the post-incremented address of B in LD1LANEpost.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209242 91177308-0d34-0410-b5e6-96231b3b80d8
make the functions to set them non-static.
Move and rename the llvm specific backend options to avoid conflicting
with the clang option.
Paired with a backend commit to update.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209238 91177308-0d34-0410-b5e6-96231b3b80d8
This commit introduces a canonical representation for the formulae.
Basically, as soon as a formula has more that one base register, the scaled
register field is used for one of them. The register put into the scaled
register is preferably a loop variant.
The commit refactors how the formulae are built in order to produce such
representation.
This yields a more accurate, but still perfectible, cost model.
<rdar://problem/16731508>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209230 91177308-0d34-0410-b5e6-96231b3b80d8
The SplitIndexingFromLoad changes exposed a latent isel bug in the PowerPC64
backend. We matched an immediate offset with STWX8 even though it only
supports register offset.
The culprit is the complex-pattern predicate, SelectAddrIdx, which decides
that if the offset is not ISD::Constant it must be a register.
Many thanks to Bill Schmidt for testing this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209219 91177308-0d34-0410-b5e6-96231b3b80d8
Since we visit the whole list of subprograms for each CU at module
start, this is clearly true - don't test for the case, just assert it.
A few old test cases seemed to have incomplete subprogram lists, but any
attempt to reproduce them shows full subprogram lists that even include
entities that have been completely inlined and the out of line
definition removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209178 91177308-0d34-0410-b5e6-96231b3b80d8
Instructions TZCNT (requires BMI1) and LZCNT (requires LZCNT), always
provide the operand size as output if the input operand is zero.
We can take advantage of this knowledge during instruction selection
stage in order to simplify a few corner case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209159 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When inserting an element that's coming from a vector load or a broadcast
of a vector (or scalar) load, combine the load into the insertps
instruction.
Added PerformINSERTPSCombine for the case where we need to fix the load
(load of a vector + insertps with a non-zero CountS).
Added patterns for the broadcasts.
Also added tests for SSE4.1, AVX, and AVX2.
Reviewers: delena, nadav, craig.topper
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3581
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209156 91177308-0d34-0410-b5e6-96231b3b80d8
- On ARM/ARM64 we get a vrev because the shuffle matching code is really smart. We still unroll anything that's not v4i32 though.
- On X86 we get a pshufb with SSSE3. Required more cleverness in isShuffleMaskLegal.
- On PPC we get a vperm for v8i16 and v4i32. v2i64 is unrolled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209123 91177308-0d34-0410-b5e6-96231b3b80d8
Windows on ARM uses R11 for the frame pointer even though the environment is a
pure Thumb-2, thumb-only environment. Replicate this behaviour to improve
Windows ABI compatibility. This register is used for fast stack walking, and
thus is part of the Windows ABI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209085 91177308-0d34-0410-b5e6-96231b3b80d8
WoA uses COFF, not ELF. ARMISelLowering::createTLOF would previously return ELF
for any non-MachO platform. This was a missed site when the original change for
target format support for Windows on ARM was done.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209057 91177308-0d34-0410-b5e6-96231b3b80d8
were added in SSE2, no SSSE3. Found this while auditing all uses of
SSSE3 in the X86 target. I don't actually expect this to make
a significant difference on anything and I don't have any detailed test
cases but I updated the existing test cases that already covered some of
this code path.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209056 91177308-0d34-0410-b5e6-96231b3b80d8
vselects with constant masks, after legalization, will get turned into
specialized shuffle_vectors so they can be matched to blend+imm
instructions.
Fixed some tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209044 91177308-0d34-0410-b5e6-96231b3b80d8
LowerVSELECT will, if possible, generate a X86ISD::BLENDI DAG node if the
condition is constant and we can emit that instruction, given the
subtarget.
This is not enough for all cases. An additional SELECTCombine optimization
will be committed.
Fixed tests that were expecting variable blends but where a blend+imm can
be generated.
Added test where we can't emit blend+immediate.
Added avx2 blend+imm tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209043 91177308-0d34-0410-b5e6-96231b3b80d8
This patch changes the design of GlobalAlias so that it doesn't take a
ConstantExpr anymore. It now points directly to a GlobalObject, but its type is
independent of the aliasee type.
To avoid changing all alias related tests in this patches, I kept the common
syntax
@foo = alias i32* @bar
to mean the same as now. The cases that used to use cast now use the more
general syntax
@foo = alias i16, i32* @bar.
Note that GlobalAlias now behaves a bit more like GlobalVariable. We
know that its type is always a pointer, so we omit the '*'.
For the bitcode, a nice surprise is that we were writing both identical types
already, so the format change is minimal. Auto upgrade is handled by looking
through the casts and no new fields are needed for now. New bitcode will
simply have different types for Alias and Aliasee.
One last interesting point in the patch is that replaceAllUsesWith becomes
smart enough to avoid putting a ConstantExpr in the aliasee. This seems better
than checking and updating every caller.
A followup patch will delete getAliasedGlobal now that it is redundant. Another
patch will add support for an explicit offset.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209007 91177308-0d34-0410-b5e6-96231b3b80d8
DIBuilder maintains this invariant and the current DwarfDebug code could
end up doing weird things if it contained declarations (such as putting
the definition DIE inside a CU that contained the declaration - this
doesn't seem like a good idea, so rather than adding logic to handle
this case we'll just ban in for now & cross that bridge if we come to
it later).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209004 91177308-0d34-0410-b5e6-96231b3b80d8
